Welder jobs in Owensboro, KY - 27 jobs

Tradesmen International is immediately hiring experienced Flat Welders for projects located in Evansville, IN. This is a first shift opportunity with a pay rate up to $28/hr based on experience and skill level. If you are a Welder eager to demonstrate your knowledge and skills while learning new ones, this is your chance to advance in your career! Job Scope: MIG welding equipment to manufacturer's specifications Supply quality parts from fixtures and jigs Weld stainless and carbon steel. Operate necessary equipment; drills, grinders, and sanders Read blueprints Requirements: Knowledge of various welding techniques specifically MIG Knowledge of manual mechanical welding techniques Company Details Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: Tradesmen+ Rewards Program - earn points for hours worked Vacation Pay Health insurance 401(k) profit-sharing savings plan Find our app, TradeGig, in the App store to see opportunities, set notifications and click to express interest! Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen's full website. Recruiter Name Amy Rivera Location US-IN-EVANSVILLE

BASIC FUNCTION: Under moderate supervision, welds metal parts together according to layouts, blueprints, or work orders using welding processes for given work areas. (May also lay out guidelines on metal parts and cut metal with cutting torch.) Adjusts automatic welder properly for material being welded. Lays out and sets up own work. Welds parts and subassemblies per blueprints. Produces quality weldments and/or welding assemblies in one or more areas. Performs other duties as assigned by leader or supervisor. QUALIFICATIONS: General knowledge of welding techniques, tools, equipment, and blueprint reading is preferred. Ability to read precision measuring tools is required. Skills may be gained through practical experience and/or on-the-job training. PHYSICAL REQUIREMENTS: Frequent climbing, bending, twisting and/or lifting approximately 55 pounds (and periodically heavier loads approximately 75 pounds) will be required. All welders must install 60 pounds spools of wire on own welding equipment, as necessary. ADDITIONAL COMMENTS: All work will be done in a timely manner within established quality standards and consistent with Company policies, priorities and needs. The individual holding this position has a broad responsibility for carrying out the objectives of the Company including supporting all company policies, meeting goals, and working as a contributing team member. Performance will be measured on the function/duties described in the position description, accomplishments during the review period, and the methods/work skills used to achieve the goals.RequiredPreferredJob Industries Other

We are seeking a skilled and dedicated Welder/Fabricator to join our team in Owensboro, KY. If you have a passion for working with metal and enjoy creating high-quality products, this is the perfect opportunity for you! In our dynamic facility, you will play a crucial role in the fabrication process, ensuring that our projects meet the highest standards of quality and precision. Responsibilities Read and interpret blueprints and technical drawings to determine project specifications. Perform welding and fabrication tasks using various techniques Inspect and test welds to ensure structural integrity and compliance with safety standards. Maintain and operate welding equipment and tools, ensuring they are in good working condition. Collaborate with team members to meet project deadlines and production goals. Adhere to safety protocols and maintain a clean and organized work environment. Assist in the training of new team members as needed. Qualifications High school diploma or equivalent; relevant vocational training is a plus. Proven experience as a welder/fabricator, with a strong portfolio of completed projects. Proficient in various welding techniques and equipment. Strong attention to detail and ability to work independently or as part of a team. Excellent problem-solving skills and a commitment to quality workmanship. Ability to lift heavy materials and work in a physically demanding environment. Valid welding certification is preferred but not required. You should be proficient in: OSHA 10-Hour Certification (OSHA 10) Welding Setups for Production Blueprint Reading Machines & technologies you'll use: MIG Welder Flux-Cored Arc Welder Salary info: $25 - $28 / hr

BASIC FUNCTION: Under moderate supervision, welds metal parts together according to layouts, blueprints, or work orders using welding processes for given work areas. (May also lay out guidelines on metal parts and cut metal with cutting torch.) MAJOR DUTIES: Adjusts automatic welder properly for material being welded. Lays out and sets up own work. Welds parts and subassemblies per blueprints. Produces quality weldments and/or welding assemblies in one or more areas. Performs other duties as assigned by leader or supervisor. QUALIFICATIONS: General knowledge of welding techniques, tools, equipment, and blueprint reading is preferred. Ability to read precision measuring tools is required. Skills may be gained through practical experience and/or on-the-job training. PHYSICAL REQUIREMENTS: Frequent climbing, bending, twisting and/or lifting approximately 55 pounds (and periodically heavier loads approximately 75 pounds) will be required. All welders must install 60 pounds spools of wire on own welding equipment, as necessary. ADDITIONAL COMMENTS: All work will be done in a timely manner within established quality standards and consistent with Company policies, priorities and needs. The individual holding this position has a broad responsibility for carrying out the objectives of the Company including supporting all company policies, meeting goals, and working as a contributing team member. Performance will be measured on the function/duties described in the position description, accomplishments during the review period, and the methods/work skills used to achieve the goals.

Job DescriptionWelder - 1st Shift | Temp-to-HirePeople Plus is partnering with a local fabrication shop to hire an experienced Welder for a 1st shift, temp-to-hire opportunity. This position offers steady hours, competitive pay, and long-term potential for the right candidate.Schedule: Monday - Friday- 6 am-2:30 pm Pay: $24-$26/hour for highly skilled and qualified welders Pay based on experience and welding skills Responsibilities: Perform welding on fabricated metal components Read and interpret blueprints and welding specifications Ensure quality welds that meet safety and production standards Maintain a clean and safe work environment Requirements: Experience with Sub Arc Welding preferred Welding Hood Ability to produce consistent, high-quality welds Reliable attendance and strong work ethic Interested? Apply today or show interest through the People Plus app. We look forward to connecting with you!

Triad Fabricators, based in Evansville, Indiana, was formed by consolidating three legacy fabrication shops; Traylor Bros. (founded in 1946), Sterling Industrial (founded in 1982), and A&D Constructors (founded in 1984). Our focus is fabrication, which is what we do best, but as part of the Traylor Construction Group, we have the resources to see any project through from concept to completion. With both domestic and international experience, Triad has proven ability on a global scale. Currently in search for a first shift shop fabricator. The ideal candidate will be an experienced fitter/welder that will have accountabilities for all, but not limited to the outlined responsibilities below: Responsibilities: Perform all job duties with SAFETY as a primary focus. Ensures all company values are adhered to and promoted through leading by example and creating an environment of trust and teamwork. Must be able to pass company administered weld test that meets company standards. Fabricates and welds a wide variety of metal structures. Ability to read blueprints, work orders, and complete standard records. Participates in all requested job-related training and development, as well as taking an active interest in improving skills with other training programs. Completes all reports and forms for service operations in a timely and accurate manner. Ensures manager is aware of any issues which can impact customer satisfaction. Maintains good condition and cleanliness of company property, tools, and equipment, including the return of tools to storage areas. Follows all company and common-sense safety policies, while using all required personal protective equipment. Contribute to team effort by accomplishing related tasks as needed. All other duties as assigned by supervision or management. Required Skills: Certified welders are preferred but not required. Welding experience (Arc, Mig) required. Ability to operate vehicles and equipment used in service shops. ( fork-lifts, hydraulic lifts, etc) Strong interpersonal skills and ability to maintain professionalism in the workplace. Strong organizational skills. Required Skills Traylor Bros., Inc. is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, veteran status, sex, sexual orientation, gender identity, age, genetic information, pregnancy, disability, protected activity, or other non-merit factors.

Welder Department: Equipment and Shop Services Reports to: Fab Shop Supervisor Works to repair and construct new fabricated products while contributing to the overall atmosphere with a positive, safety conscious, and proactive attitude. Welders will build and fabricate equipment for use in Frontier-Kemper's Mining, Civil Divisions, while also constructing new OEM equipment provided to outside customers by our Lake Shore division. A well rounded skill set, willingness to learn and work well with others both in and out of their immediate department are essential. ROLES AND RESPONSIBILITIES: Must comply with all company policies and be able to work in way that does not pose a threat to themselves and others. Efficiently and accurately complete work assigned by management. Provide high quality and accurate fabricated items based on supplied drawings. The safe operation of forklifts and overhead cranes to perform work. Evaluating equipment to assess damage and wear. Periodic facility maintenance and repairs to work areas in the shop. Participate with all departments of FKCI to improve efficiency, quality, and safety. Work overtime as needed. Perform the physical requirements of walking on uneven surfaces, standing constantly on a hard surface, climbing stairs or ladders, reaching, bending, and kneeling. Constant exertion of 10-20 lbs of force to lift, carry, push or pull objects; frequent exertion of 25-50 lbs of force and occasional exertion of 50-100 lbs of force. Must be able to work outside in all weather conditions. Other duties as assigned. SUPERVISION RECEIVED AND GIVEN: Welders report directly to the Fab Shop Supervisor. DECISION MAKING: Responsible for decisions as they relate to completing assigned work in a safe and effective manor. QUALIFICATIONS AND REQUIREMENTS: Education High school diploma or equivalent. AWS D1.1 Certified for structural welding. Experience with SMAW (stick), MIG (wire), and TIG welding methods. Ability to read blue prints and perform layout work. Tools Must be supply own tools Experience 5 years related experience preferred. Structural steel experience preferred. Excellent communication and interpersonal skills. Familiar with shop practices including machine work, mechanical repair and steel fabrication. Skills: Self-motivated and able to work with minimal supervision. Ability to understand and interpret technical drawings and perform work layout. Ability to communicate with others effectively. Ability to work in a collaborative manner with multiple team members in different departments. Ability to handle multiple tasks in a fast paced environment. Due to the contractual nature of our work, time is of the essence. The scheduling, completion, and delivery of the work make regular attendance an essential requirement of the job. Equal Opportunity Employer

Founded in 1921, HMC Gears has become one of the lead manufacturers of large gears, and their components, in the United States. As a custom job shop, every day brings a diverse set of challenges and successes. Our welders provide invaluable skills to our production team and take our gears to the next level. Welders are responsible for welding and fabricating heavy metal components by hand or flame-cutting equipment according to blueprints and specifications. The ideal candidate will have experience with MIG, TIG, FCAW, and SAW (submerged arc welding) welding techniques and a commitment to producing high-quality work. Responsibilities include but not limited to: Reading and understanding blueprints and drawings Setup parts Weld, cut, grind, and run production of large gears Assembly and disassembly Self-inspect and ensure welds meet quality standards Perform preventative maintenance on welding equipment Load/unload and monitor oven Operating overhead cranes and forklifts Qualifications Certified welders are preferred but not required Welding experience (Arc, Tig, Mig) required Ability to lift 50 pounds as required without assistance This position can be exposed to heat, cold, fumes or airborne particles, debris such as metal shavings, loud noise, vibration and moving mechanical parts. Protective gear such as earplugs, safety glasses, steel toe footwear, and gloves are required. The physical demands of this position include vision, hearing, manual dexterity, standing or walking for long periods, reaching, bending, lifting and carrying up to 50lbs, climbing, kneeling, crouching, crawling, stooping, pushing, and pulling. This is a permanent position with competitive wages and exceptional benefits including PTO, company paid holidays, health insurance, company paid dental insurance, group life/ short-term disability insurance, optional wellness programs, retirement plan, and more. *Candidates must be authorized to work in the U.S. and able to commute to Princeton, IN.

Pay: $48,000 annually Schedule - Full Time, 8hr shifts, Monday - Friday 7:45am to 4:45pm Our staff also enjoy these benefits: * Health, dental, vision, prescription drug and life insurance * Short & long-term disability * 401(k) retirement plan * Paid time off and paid holidays * Professional development assistance * Career advancement opportunities MTC is proud to operate the Earle C. Clements Job Corps Center in Morganfield, KY where our staff provide quality services to our local youth. We value our professional and caring employees who are dedicated to improving people's lives and we want YOU to join our team! What you'll be doing: Teaching youth, 16-24 years of age in the welding processes of SMAW, GMAW, GMAW/SPRAY, FCAWG. FCAWS and GTAW in the D . 1 . 1 structural welding code. This is an opportunity to teach today's youth a career that has always been and remains in high demand in today's industry. Essential functions: * Provide students with direction, instruction, and assistance in designated areas of instruction. * Motivate and counsel students in areas of behavior, training, personal problems, or study habits. * Coordinate with counselors and staff as necessary to resolve issues affecting student training and/ or instruction. * Develop and prepare lessons in accordance with approved curriculum guidelines, recommend curricula changes and supplemental materials. * Maintain organized, clean, and safe training environment. * Participate in student assessment panels, perform required documentation and evaluation using CIS (Center Information System) and other documentation systems. Education and Experience Requirements: * High School Diploma or equivalent * Certified by American Welding Society or the standards established by the American Society of Mechanical Engineers * Boiler and Pressure Vessel code. * Teaching experience is preferred. * Valid driver's license with an acceptable driving record is required. Why: Make a positive impact in your community by doing meaningful work that results in a rewarding career. Management & Training Corporation (MTC) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, disabled status, veteran status, genetic information, national origin, or any other category protected by federal law. MTC participates in E-Verify. We strive to provide reasonable accommodation for qualified individuals with disabilities, including disabled veterans, in our job application and hiring process. If you are interested in employment opportunities with Management & Training Corporation and need assistance, please contact our staffing department through ***************************** or ************.

Triad Fabricators, based in Evansville, Indiana, was formed by consolidating three legacy fabrication shops; Traylor Bros. (founded in 1946), Sterling Industrial (founded in 1982), and A&D Constructors (founded in 1984). Our focus is fabrication, which is what we do best, but as part of the Traylor Construction Group, we have the resources to see any project through from concept to completion. With both domestic and international experience, Triad has proven ability on a global scale. Currently in search for a first shift shop fabricator. The ideal candidate will be an experienced fitter/welder that will have accountabilities for all, but not limited to the outlined responsibilities below: Responsibilities: * Perform all job duties with SAFETY as a primary focus. * Ensures all company values are adhered to and promoted through leading by example and creating an environment of trust and teamwork. * Must be able to pass company administered weld test that meets company standards. * Fabricates and welds a wide variety of metal structures. * Ability to read blueprints, work orders, and complete standard records. * Participates in all requested job-related training and development, as well as taking an active interest in improving skills with other training programs. * Completes all reports and forms for service operations in a timely and accurate manner. * Ensures manager is aware of any issues which can impact customer satisfaction. * Maintains good condition and cleanliness of company property, tools, and equipment, including the return of tools to storage areas. * Follows all company and common-sense safety policies, while using all required personal protective equipment. * Contribute to team effort by accomplishing related tasks as needed. * All other duties as assigned by supervision or management. Required Skills: * Certified welders are preferred but not required. * Welding experience (Arc, Mig) required. * Ability to operate vehicles and equipment used in service shops. ( fork-lifts, hydraulic lifts, etc) * Strong interpersonal skills and ability to maintain professionalism in the workplace. * Strong organizational skills. Required Skills Traylor Bros., Inc. is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, veteran status, sex, sexual orientation, gender identity, age, genetic information, pregnancy, disability, protected activity, or other non-merit factors.

Pay: $48,000 annually Schedule - Full Time, 8hr shifts, Monday - Friday 7:45am to 4:45pm Our staff also enjoy these benefits: Health, dental, vision, prescription drug and life insurance Short & long-term disability 401(k) retirement plan Paid time off and paid holidays Professional development assistance Career advancement opportunities MTC is proud to operate the Earle C. Clements Job Corps Center in Morganfield, KY where our staff provide quality services to our local youth. We value our professional and caring employees who are dedicated to improving people's lives and we want YOU to join our team! What you'll be doing: Teaching youth, 16-24 years of age in the welding processes of SMAW, GMAW, GMAW/SPRAY, FCAWG. FCAWS and GTAW in the D . 1 . 1 structural welding code. This is an opportunity to teach today's youth a career that has always been and remains in high demand in today's industry. Essential functions: Provide students with direction, instruction, and assistance in designated areas of instruction. Motivate and counsel students in areas of behavior, training, personal problems, or study habits. Coordinate with counselors and staff as necessary to resolve issues affecting student training and/ or instruction. Develop and prepare lessons in accordance with approved curriculum guidelines, recommend curricula changes and supplemental materials. Maintain organized, clean, and safe training environment. Participate in student assessment panels, perform required documentation and evaluation using CIS (Center Information System) and other documentation systems. Education and Experience Requirements: High School Diploma or equivalent Certified by American Welding Society or the standards established by the American Society of Mechanical Engineers Boiler and Pressure Vessel code. Teaching experience is preferred. Valid driver's license with an acceptable driving record is required. Why: Make a positive impact in your community by doing meaningful work that results in a rewarding career. Management & Training Corporation (MTC) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, disabled status, veteran status, genetic information, national origin, or any other category protected by federal law. MTC participates in E-Verify. We strive to provide reasonable accommodation for qualified individuals with disabilities, including disabled veterans, in our job application and hiring process. If you are interested in employment opportunities with Management & Training Corporation and need assistance, please contact our staffing department through ***************************** or ************.

Why Join Us At Phoenix Fabricators and Erectors, we believe that success comes from hard work, teamwork, and growth. Our work is challenging and rewarding, giving you the opportunity to take on exciting projects, solve complex problems, and see the real impact of your efforts. Whether you're in the field or the office, you'll be part of a team that values ambition, skill, and dedication where your contributions are recognized, and your career can thrive. Company Overview Phoenix Fabricators and Erectors, LLC (“Phoenix”), founded in 1986 and headquartered in Avon, Indiana, is one of the nation's leading construction companies in elevated water towers and storage containers. Phoenix has constructed over 5,000 elevated water storage tanks throughout the United States as well as several foreign countries. By employing our own field crews, Phoenix offers a turnkey operation through engineering, fabrication, foundation installation, field erection, field coating, and maintenance. Phoenix maintains the industry's highest-rated safety standards and safe working environment, earning numerous “Tank of the Year” awards from the Steel Tank Institute/Steel Plate Fabricators Association, American Water Works Association, and Tnemec Industrial Coatings. Primary Duties & Responsibilities Work under a Shop Supervisor and collaborate with shop team members Follow all safety procedures and maintain positive work habits Interpret blueprints, sketches, and technical specifications Use basic math skills to calculate dimensions and weights Inspect materials before and after welding Perform final inspection on completed welds Operate an Oxy/Acetylene torch Weld using GMAW, FCAW, and SMAW processes in various positions Grind and gouge metal for extended periods when required Operate overhead bridge cranes to move materials Apply rigging techniques using key plates, bull pins, keys, shims, lifting lugs, nuts, U-bars, etc. Ensure weldments meet AWS D1.1 and AWWA D100 standards Compensation Competitive hourly wages based on experience and qualifications Overtime eligibility Benefits 401(k) and 401(k) matching Health, dental, vision, and life insurance Health savings account Schedule Full-time Monday to Friday In-person work location

Org Marketing Statement At Parker Aerospace, we develop technologies and innovative solutions that enable reliable, efficient and increasingly sustainable flight for the lifecycle of the aircraft, including aftermarket support. Our passionate people with deep engineering expertise, together with our breadth of differentiated technologies, ensure that we make the extraordinary happen and continue to shape the future of aviation in partnership with our customers. As a member of our team, you are instrumental in fulfilling our mission: 'Enabling Engineering Breakthroughs that Lead to a Better Tomorrow.' Pursuing a career at Parker presents unlimited opportunities for both professional and personal development. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges. At Parker, our team members belong, matter and make a difference. (insert division specific summary here - If you do not have a statement summary, see your division marketing team.) POSITION SUMMARY The Production Welder is under supervision performing routine welding and fitting tasks that meet company and departmental objectives. Ensures the maintenance of a safe work environment with an ultimate goal of zero accidents. Day Shift Position, with core hours of 6:00 am - 2:30 pm, Monday through Friday in an environment with voluntary hours over forty. Afternoon shifts are 12 - 8:30 pm. Flexible schedule with a start time as early as 5 am. Must have two years of welding experience or successfully completed a formal education program in welding. Training provided on aluminum welding. After completion of welding certification, this role will perform production welding tasks Core Job Responsibilities * Responsible for various types of weld preparation, welding and weld finishing operations in the production of aluminum/stainless heat exchangers * Manufactures and assembles metal fabrications i.e. ferrous and non-ferrous using appropriate equipment and processes provided * Manufactures and assembles, fabricated and mechanical components, structures and vessels from drawings * Maintains a consistent standard of work and performance in compliance with regulatory and Quality Assurance standards * Ensures the performance of work and the maintenance of work environment that meets safety goal objectives * Assists in the development and implementation of product improvement initiatives and identifies where improvements in function, efficiency and quality can be achieved * Other responsibilities as assigned * Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary Education: High school diploma or GED. Refer to years of experience for additional qualifications with no experience in welding. Years Experience: 0-2 years of experience. 2 years of work experience or 0 years work experience with completion of a certificate/degree from a technical college or completion of a welding apprenticeship program, or other equivalent programs. Knowledge, Skills, Abilities: * Knowledge of welding techniques * Able to read and understand mechanical drawings and weld prints * Strong knowledge of basic math * Ability to recognizes and solves typical problems that can occur in own work area; evaluates and selects solutions from established options * Good communication and organizational skills TYPICAL MENTAL AND PHYSICAL DEMANDS * Ability to lift to 50 pounds regularly. * Ability to stand, walk, and sit for extended periods of time. * Ability to frequently bend, stoop, push, pull, and reach for extended periods of time. * Ability to hear or talk to effectively communicate with delivery personnel and internal customers. * Ability to use hands and fingers for detailed work over extended periods of time. * Ability to perform rapid repetitive tasks with a focus on accuracy and efficiently for extended periods of time. * Ability to wear required PPE throughout the entirety of the shift. The essential functions have been provided as examples of the type of work performed by employees assigned to the job classification. The company reserves the right to modify the work assignments and/or to make reasonable accommodations so that qualified employees can perform the essential functions. The job description is not intended to be an all-inclusive list of duties WORK AUTHORIZATION: This position is subject to meeting U.S. export compliance and/or U.S. Government contracting citizenship eligibility requirements". DRUG-FREE WORKPLACE: In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment. Benefit & Retirement Plans Parker offers competitive benefit programs, including: * Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. * 401(k) Plan with company matching contributions at 100% of the first 5% of pay * Company provided defined-contribution retirement plan with annual contribution equal to 3% of pay * Career development and tuition reimbursement * Other benefits including paid parental leave, short and long-term disability programs, adoption assistance, a Care.com membership and financial planning assistance are provided at no cost to you. * Supplemental benefit programs including identity protection, legal protection, and pet wellness are available at competitive rates. * Paid Time Off and 13 Company-Paid Holidays. Equal Employment Opportunity Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission

Looking for experienced welder fabricator that can stick weld in all positions. We are repairing Rock/Sand Hopper barges. The work is performed in the wing tanks and hoppers. Must demonstrate the ability to weld all positions with wet and rusty thin metal. Must be able to enter the barge man hole covers and climb down 12' ladder. Previous Dry dock experience is a plus. Monday thru Friday 10 hour days and 6 hours on Saturday. Benefits include: Competitive hourly pay with overtime Traditional 401(k) / Roth 401(k) retirement plans with up to 3% matching Health Insurance with low premiums and free urgent care clinic through Deaconess At-Work Voluntary wellness program Paid holidays and vacation days

Job Description Looking for experienced welder fabricator that can stick weld in all positions. We are repairing Rock/Sand Hopper barges. The work is performed in the wing tanks and hoppers. Must demonstrate the ability to weld all positions with wet and rusty thin metal. Must be able to enter the barge man hole covers and climb down 12' ladder. Previous Dry dock experience is a plus. Monday thru Friday 10 hour days and 6 hours on Saturday. Benefits include: Competitive hourly pay with overtime Traditional 401(k) / Roth 401(k) retirement plans with up to 3% matching Health Insurance with low premiums and free urgent care clinic through Deaconess At-Work Voluntary wellness program Paid holidays and vacation days

This position will perform the functions of a skilled welder. They will work from structure plans to weld various parts. * Measure, cut, and join appropriate metals to specifications * Use grinder to smooth and clean as appropriate * Inspect work and fill/repair as necessary * Test the strength of each joint during and after project completion * Identify hazards, defects and needs for adjustments to ensure compliance with applicable codes, laws, working practices, and health and safety * Clean and maintain all equipment and tools and keep work areas neat * The above list of duties is not to be construed as an exhaustive list. Other duties logically associated with the position may be assigned. Qualifications: * Knowledge of MIG welding criteria per QA and passing our skills test * Operate grinders and torches * Excellent stamina, strength and dexterity * Good time-management skills * Sound understanding of safety rules, regulations, and safe job procedures * Must be able to assist in other areas as needed and follow all quality procedures Pittsburg Tank & Tower Group is an equal opportunity employer. FLSA Classification: Non-Exempt Work Hours: Varies

Welder Department: Equipment and Shop Services Reports to: Fab Shop Supervisor Works to repair and construct new fabricated products while contributing to the overall atmosphere with a positive, safety conscious, and proactive attitude. Welders will build and fabricate equipment for use in Frontier-Kemper's Mining, Civil Divisions, while also constructing new OEM equipment provided to outside customers by our Lake Shore division. A well rounded skill set, willingness to learn and work well with others both in and out of their immediate department are essential. ROLES AND RESPONSIBILITIES: * Must comply with all company policies and be able to work in way that does not pose a threat to themselves and others. * Efficiently and accurately complete work assigned by management. * Provide high quality and accurate fabricated items based on supplied drawings. * The safe operation of forklifts and overhead cranes to perform work. * Evaluating equipment to assess damage and wear. * Periodic facility maintenance and repairs to work areas in the shop. * Participate with all departments of FKCI to improve efficiency, quality, and safety. * Work overtime as needed. * Perform the physical requirements of walking on uneven surfaces, standing constantly on a hard surface, climbing stairs or ladders, reaching, bending, and kneeling. * Constant exertion of 10-20 lbs of force to lift, carry, push or pull objects; frequent exertion of 25-50 lbs of force and occasional exertion of 50-100 lbs of force. * Must be able to work outside in all weather conditions. * Other duties as assigned. SUPERVISION RECEIVED AND GIVEN: Welders report directly to the Fab Shop Supervisor. DECISION MAKING: Responsible for decisions as they relate to completing assigned work in a safe and effective manor. QUALIFICATIONS AND REQUIREMENTS: Education * High school diploma or equivalent. * AWS D1.1 Certified for structural welding. * Experience with SMAW (stick), MIG (wire), and TIG welding methods. * Ability to read blue prints and perform layout work. Tools * Must be supply own tools Experience * 5 years related experience preferred. * Structural steel experience preferred. * Excellent communication and interpersonal skills. * Familiar with shop practices including machine work, mechanical repair and steel fabrication. Skills: * Self-motivated and able to work with minimal supervision. * Ability to understand and interpret technical drawings and perform work layout. * Ability to communicate with others effectively. * Ability to work in a collaborative manner with multiple team members in different departments. * Ability to handle multiple tasks in a fast paced environment. Due to the contractual nature of our work, time is of the essence. The scheduling, completion, and delivery of the work make regular attendance an essential requirement of the job. Equal Opportunity Employer

Job DescriptionOverview We are seeking a skilled and dedicated Welder/Fabricator to join our team in Owensboro, KY. If you have a passion for working with metal and enjoy creating high-quality products, this is the perfect opportunity for you! In our dynamic facility, you will play a crucial role in the fabrication process, ensuring that our projects meet the highest standards of quality and precision. Responsibilities Read and interpret blueprints and technical drawings to determine project specifications. Perform welding and fabrication tasks using various techniques Inspect and test welds to ensure structural integrity and compliance with safety standards. Maintain and operate welding equipment and tools, ensuring they are in good working condition. Collaborate with team members to meet project deadlines and production goals. Adhere to safety protocols and maintain a clean and organized work environment. Assist in the training of new team members as needed. Qualifications High school diploma or equivalent; relevant vocational training is a plus. Proven experience as a welder/fabricator, with a strong portfolio of completed projects. Proficient in various welding techniques and equipment. Strong attention to detail and ability to work independently or as part of a team. Excellent problem-solving skills and a commitment to quality workmanship. Ability to lift heavy materials and work in a physically demanding environment. Valid welding certification is preferred but not required. You should be proficient in: OSHA 10-Hour Certification (OSHA 10) Welding Setups for Production Blueprint Reading Machines & technologies you'll use: MIG Welder Flux-Cored Arc Welder Salary info: $25 - $28 / hr

Job DescriptionSalary: Founded in 1921, HMC Gears has become one of the lead manufacturers of large gears, and their components, in the United States. As a custom job shop, every day brings a diverse set of challenges and successes. Our welders provide invaluable skills to our production team and take our gears to the next level. Welders are responsible for welding and fabricating heavy metal components by hand or flame-cutting equipment according to blueprints and specifications. The ideal candidate will have experience with MIG, TIG, FCAW, and SAW (submerged arc welding) welding techniques and a commitment to producing high-quality work. Responsibilities include but not limited to: Reading and understanding blueprints and drawings Setup parts Weld, cut, grind, and run production of large gears Assembly and disassembly Self-inspect and ensure welds meet quality standards Perform preventative maintenance on welding equipment Load/unload and monitor oven Operating overhead cranes and forklifts Qualifications Certified welders are preferred but not required Welding experience (Arc, Tig, Mig) required Ability to lift 50 pounds as required without assistance This position can be exposed to heat, cold, fumes or airborne particles, debris such as metal shavings, loud noise, vibration and moving mechanical parts. Protective gear such as earplugs, safety glasses, steel toe footwear, and gloves are required. The physical demands of this position include vision, hearing, manual dexterity, standing or walking for long periods, reaching, bending, lifting and carrying up to 50lbs, climbing, kneeling, crouching, crawling, stooping, pushing, and pulling. This is a permanent position with competitive wages and exceptional benefits including PTO, company paid holidays, health insurance, company paid dental insurance, group life/ short-term disability insurance, optional wellness programs, retirement plan, and more. *Candidates must be authorized to work in the U.S. and able to commute to Princeton, IN.