Welder jobs in Palm Bay, FL

Job Description Welder compensation range (based on experience level) $22- $37/hr Welder I($22/hr-$24/hr) · Attains familiarity with Piper QAM/QIM and FAA requirements. · Perform TIG welding of aluminum and steel parts. · Understands standards and criteria required to inspect and buying off own work using Piper inspection certifications. · Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Partner with senior teammates within career path to receive and share practical knowledge for proper training to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform duties as assigned by supervision. Welder II($25/hr-$27/hr) · Maintaining compliance with Piper QAM/QIM and FAA requirements. · Performing TIG welding of less complex aluminum and steel parts such as tow bars and seat handles. · Inspect and buying off own work using Piper inspection certifications. · Ability to and willingness to receive and share practical knowledge, train, and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere, maintain and assist teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform duties of lower graded position within Career Path and other duties as assigned by supervision. Senior Welder II($28/hr-$30/hr) · Maintaining compliance with Piper QAM/QIM and FAA requirements. · Performing TIG welding of less complex aluminum and steel parts such as Tow bars and seat handles. · Inspect and buying off own work using Piper inspection certifications. · Serves as lead with the ability to guide and willingness to receive and share practical knowledge, train, cross-train and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere, maintain, assist and train teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform audits of areas within the department as required to maintain compliance with all FAA and Piper operational requirements. Initiate related operational process or procedural corrective action, or request additional assistance from leadership or other support teams where necessary. · Perform duties of lower graded position within Career Path and other duties as assigned by supervision Structural Welder I($28/hr-$30/hr) · Maintaining compliance with Piper QAM/QIM and Faa requirements. · Performing TIG structural welding of complex aluminum, steel, and stainless-steel welded structures including oil collector tanks and air boxes. · Inspect and buying off own and other Team Mate's work using Piper inspection certifications · Assisting in addressing departmental quality concerns to resolve them expeditiously and in a cost-effective manner. · Helping troubleshoot and re-work discrepancies as necessary directed by the Supervisor or Team lead · Providing technical assistance for other teammates & Piper's Manufacturing Support Teams. · Conducting training and cross training of teammates to attain acceptable levels of performance. · Provides assistance when required during new product development, design, build and testing. · Partner with senior teammates within career path to receive and share practical knowledge for proper training to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform duties as assigned by supervision. Structural Welder II($34/hr) · Maintaining compliance with Piper QAM/QIM and FAA requirements. · Performing TIG structural welding of complex and intricate aluminum, stainless steel and steel parts including engine mounts & other aircraft assemblies. · Assisting in addressing departmental quality concerns to resolve them expeditiously and in a cost-effective manner. · Helping troubleshoot and re-work all major discrepancies as necessary. · Inspect and buying off own and other teammates work using Piper inspection certifications. · Providing technical assistance for other teammates & Piper's Manufacturing Support Teams as well as vendors, equipment suppliers, etc. when appropriate. · Conducting training and cross training of teammates to attain acceptable levels of performance. · Assisting with continuous improvement efforts to enhance the Team's performance including schedule delivery performance, reduction of late work, elimination of quality defects & scrap, productivity improvement initiatives and cost reductions. · Works with other manufacturing areas to ensure production readiness for design changes. Provides assistance when required during new product development, design, build and testing. · Ability to and willingness to receive and share practical knowledge, train, and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere, maintain and assist teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform duties of lower graded position within Career Path and other duties as assigned by supervision Senior Structural Welder ($37/hr) · Maintaining compliance with Piper QAM/QIM and FAA requirements. · Performing TIG structural welding of all complex, intricate aluminum, stainless steel and steel parts · Interfacing with other departments regarding quality concerns to resolve expeditiously and in a cost-effective manner. · Troubleshooting and re-working all major discrepancies as necessary · Inspect and buying off own and other teammates work using Piper inspection certifications. · Acting as a technical liaison between teammates & Piper's Manufacturing Support Teams as well as vendors, equipment suppliers, etc. when appropriate. · Conducting or coordinating training and cross training of teammates to attain acceptable levels of performance. · Driving continuous improvement efforts to enhance the team's performance including schedule delivery performance, reduction of late work, elimination of quality defects & scrap, productivity improvement initiatives and cost reductions. Assists with data collection, review and report generation. · Working with other manufacturing areas to ensure production readiness for design changes. Provides assistance when required during new product development, design, build and testing. · Serves as lead with the ability to guide and willingness to receive and share practical knowledge, train, cross-train and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere, maintain, assist and train teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform audits of areas within the department as required to maintain compliance with all FAA and Piper operational requirements. Initiate related operational process or procedural corrective action, or request additional assistance from leadership or other support teams where necessary. · Perform duties of lower graded position within Career Path and other duties as assigned by supervision Minimum Qualifications · High school diploma or equivalent · Successful completion welding program or 2 years' experience preferred · Related welding experience requirements: o Welder I: ≤ 2 years of experience o Welder II: 2 - 5 years of experience o Senior Welder: ≥ 5 years of experience o Structural Welder I: ≤ 2 years of experience o Structural Welder II: 2 - 5 years of experience o Senior Structural Welder: ≥ 5 years of experience · Must be able to pass required weld certification per AWS D17.1. ·

Shapes Precision Manufacturing is seeking a skilled and detail-oriented Resistance Welding Technician to join our manufacturing team in Palm Bay, Florida. This role is responsible for performing precision resistance welding operations to assemble components in strict compliance with engineering specifications, customer requirements, and AS9100D/NADCAP quality standards. The Resistance Welding Technician will work closely with production, quality, and engineering to ensure consistent delivery of safe, high-quality parts for our customers. Key Responsibilities Set up, adjust, and operate resistance welding machines (spot, seam) to join precision metal components. Read and interpret blueprints, technical drawings, process specifications, and work orders. Perform inspections of completed welds using measurement tools, gauges, and visual inspection techniques to verify conformance. Monitor welding processes and equipment operation, making necessary adjustments to maintain weld quality and efficiency. Develop and maintain weld schedules in accordance with NADCAP requirements, including proper documentation and audit readiness. Conduct routine maintenance on welding equipment and tools to ensure performance and minimize downtime. Document work performed in accordance with company procedures, quality requirements, and customer standards. Adhere to all company and customer safety policies, including proper use of PPE, lockout/tagout, and safe handling of aerospace materials. Maintain work areas in compliance with 5S and Lean Manufacturing practices. Collaborate with Quality, Engineering, and Production teams to resolve technical issues, recommend process improvements, and support continuous improvement initiatives. Qualifications Minimum of 3 years of resistance welding experience in aerospace or precision manufacturing. Demonstrated ability to weld materials such as aluminum, titanium, and stainless steel. Proficiency in reading and interpreting blueprints, weld symbols, and technical documentation. Knowledge of AWS D17.2 or equivalent aerospace welding standards preferred. Ability to develop and adjust weld schedules in accordance with NADCAP requirements. AWS Certified Resistance Welding Technician (CRWT) certification preferred; ability to qualify to customer-approved weld schedules required. Strong attention to detail, quality focus, and ability to follow established procedures. High school diploma or GED required; additional technical or vocational welding training preferred. Physical Requirements Ability to lift up to 50 pounds. Ability to stand, bend, and perform repetitive tasks for extended periods. Manual dexterity, good eyesight, and steady hand-eye coordination for detailed work. Work Schedule Must be available for assigned shifts, overtime, and weekend work as required to meet aerospace production schedules. Professional Conduct & Workplace Expectations Demonstrating respect, teamwork, and accountability in all interactions. Maintaining confidentiality of company and customer information. Adhering to company policies, including attendance, safety, and quality requirements. Following all applicable legal, ethical, and regulatory standards. Contributing to a positive work environment where safety, compliance, and continuous improvement are priorities. Compensation and Benefits Competitive salary and performance-based incentives. Comprehensive benefits package including medical, dental, vision, life insurance, and 401(k) with company match. Paid time off (PTO), paid holidays, and other leave programs. Opportunities for professional development, training, and certification support. Additional Information Employment decisions are made without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, veteran status, or any other legally protected status. Employment with Shapes Precision Manufacturing is on an at-will basis. Nothing in this job posting or any other communication creates an employment contract or alters the at-will employment relationship. All offers of employment are contingent upon successful completion of a background check, reference check and drug screening, in accordance with applicable laws and company policy.

About Us At ENFRA, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At ENFRA, stability, innovation, and growth are more than just values they are the pillars of our continued success. Overview The Welder will be welding of rebar of all sizes. Fabricate rack brackets, supports and junction boxes, miscellaneous repairs to equipment, trailers and job shacks and other company owned items, equipment and vehicles. Responsibilities Welds together components of products specified by layout, blueprints, diagram, and work order, welding procedures or oral instructions. Sets controls on welding machine in conformance with WPS. May weld in flat, horizontal, vertical, or overhead positions as qualified. Must be able to read a tape measure. Tack assemblies together using approved WPS. Adheres to all company health, and safety policies. Work in a safe manner. Maintain a clean and organized workspace. Qualifications Must be qualified under AWS D1.1 code for Overhead (4G) and Vertical (3G) using SMAW Must pass welding test. Experience working with stainless and carbon steel. Experience working with overhead cranes. High school diploma or equivalent. Must be able to lift up to 50 lbs. Must be able to understand fractions, decimals, and degrees of a circle. General knowledge of structural members ( beams, channel, angle, pipe, and tubing OSHA 10 or 30 hour preferred Noisy environment Climbing stairs. Operating machinery and/or power tools Remaining in a stationary position, often standing or sitting for prolonged periods Medium work that includes adjusting and/or moving objects up to 50 pounds 5-10% of time will be spent traveling to job site(s)/office location. Pay Range USD $28.00 - USD $32.00 /Hr. ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law.

Principle Responsibilities Skilled in general mechanical abilities. Must be able to read blueprints; layout to tight tolerances. Must be able to weld 6G and pass an Xray quality proficiency test. Using arc welders, gas welders, and gas torches, welds together metal components and alloys such as pipelines, boilers for a variety of complex precision assemblies. Involves a considerable amount of welding to high strength and pressure requirements. Joins together components of fabricated sheet metal assemblies; cut, trim, or scarf metal objects to dimensions, as specified by layout, work orders, or blueprints. Requirements High school degree or equivalent education/experience plus three years trade related experience preferred. Certification required. Capabilities Ability to read and interpret blueprints, manuals. Physical Requirements Standing, bending, stooping, lifting up to 70 lbs. Equipment to be Used Arc welders, gas welders, gas torches. Note Duties and skills required for this position are general and describe the principal functions, level of knowledge and skills required of this job. You should not consider it an all-inclusive listing of work requirements. You may be asked to perform other duties as assigned, including work in other functional areas. Willingness to contribute in such a manner is taken into consideration in job candidacy, transfer, and performance appraisal. The Precision Companies are committed to providing: An environment that encourages all employees to make full use of their talents Equitable compensation Good working conditions Opportunity for personal development Precision Companies is an Equal Opportunity employer committed to workplace diversity. All applicants will be considered with equal opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected characteristics. Precision Companies participates in the E-Verify program as required by law. Precision Companies is dedicated to working with and providing reasonable accommodation to applicants and employees with physical and mental disabilities. Precision Companies is a drug-free workplace. Job Type: Full-time Job Type: Full-time Pay: $28.00 - $34.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Professional development assistance Tuition reimbursement Shift: 8 hour shift Ability to Commute: Cocoa, FL 32926 (Preferred) Ability to Relocate: Cocoa, FL 32926: Relocate before starting work (Preferred) Work Location: In person

At Beyel Brothers, we're dedicated to excellence in crane operations, rigging, heavy haulage, and marine transport. Our mission is to lead with humility, drive, and social smarts, attracting talented individuals to join our team. With a focus on safety, efficiency, and client satisfaction, we strive to set industry standards and build lasting relationships. Join us in a dynamic environment where every team member has the opportunity to thrive and make a difference. The ABS Welder will be responsible for welding, assembling, and inspecting components to ensure they meet our quality standards. This role requires expertise in ABS welding techniques, a commitment to safety, and the ability to work effectively in a fast-paced manufacturing environment. Responsibilities: Perform ABS welding operations according to engineering drawings, specifications, and industry standards. Set up and operate welding equipment, including but not limited to MIG and TIG welding machines. Fabricate and assemble components using ABS welding techniques, ensuring proper fit and alignment. Inspect welded joints for defects and make necessary adjustments or repairs to meet quality standards. Follow safety protocols and procedures to prevent accidents or injuries in the workplace. Maintain a clean and organized work area to ensure efficiency and safety. Requirements: High school diploma or equivalent. Proven experience as an ABS Welder or in a similar welding role. Proficiency in ABS welding techniques, including MIG and TIG welding. Strong attention to detail and the ability to interpret engineering drawings and specifications. Knowledge of welding equipment and tools, including setup and maintenance. Ability to work independently and as part of a team in a fast-paced manufacturing environment. Excellent problem-solving skills and a commitment to producing high-quality work. Certification in welding techniques or completion of a welding training program is a plus. Benefits: Competitive pay depending on experience. Comprehensive benefits package, including medical, dental, and vision coverage. 401(k) retirement savings plan with employer match. Opportunities for professional development and future advancement within the company. Must be able to pass a drug screen, fit for duty, and background check. Beyel Brothers is an EOE/Drug Free Workplace. Job Type: Full-time Experience level: 1 year Schedule: 8 hour shift Day shift Experience: Welding: 1 year (Required) Work Location: In person

Mid-State Metals LLC provides custom fabrication of miscellaneous and architectural metals. Serving the commercial and industrial construction industry, Mid-State Metals has built a solid reputation for managing and completing an array of projects through our commitment to safety and customer service. Mid-State Metals is a true turn-key miscellaneous metals contractor. From estimating, detailing and design, to Erection and close out, our projects are handled in-house allowing us to adapt quickly to your project needs. Our certified welders and craftsman have the ability to weld and fabricate steel, stainless steel and aluminum. Mid-State Metals LLC is centrally located in Orlando, Florida. We have the ability to ship our custom products throughout the United States. We also erect our products on job sites throughout the Southeastern US. Job Description We are seeking skilled and reliable Field Welders with current 3G/4G certifications and hands-on experience working with miscellaneous metals such as stairs, handrails and light structural components. The ideal candidate will be proficient in stick welding (SMAW), grinding, and interpreting blueprints and work instructions to complete installations with precision and professionalism. Responsibilities: Perform stick welding (SMAW) and other welding techniques on steel, aluminum and stainless steel materials. Grind railings, stairs and structural components according to specifications. Operate grinders, band saws and other standard ironworker tools. Follow safety procedures and ensure compliance with OSHA, Mid-State, and General Contractor regulations. Travel to job sites and adapt to various work schedules as needed. Lift and carry up to 75 pounds safely. Collaborate with team members to complete projects efficiently and on time. Qualifications Certified in 3G/4G welding is preferred (company will certify also). Proven experience in stick welding (SMAW), particularly with stairs, railings and light structures. Proficient in using grinders, band saws, and standard fabrication tools. Experience with aluminum and stainless welding preferred. Ability to read and follow blueprints. Familiarity with construction job sites and safety protocols. Must be dependable, team-oriented, and flexible with work hours and travel requirements. Additional Information All your information will be kept confidential according to EEO guidelines. Benefits: 401(k) 401(k) matching Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Referral program Vision insurance Schedule: Monday to Friday Supplemental Pay: Bonus pay

SUMMARY: Fits, and welds fabricated, cast, and forged components to assemble by preforming the following duties. Also, assures parts comply to drawing specifications. This will be for welding aluminum. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: * Read blueprints and drawings and take or read measurements to plan layout and procedures * Determine the appropriate welding equipment or method based on requirements * Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) * Operate angle grinders to prepare the parts that must be welded * Align components using calipers, rulers etc. and clamp pieces * Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead) * Lays out, positions, aligns, and fits components together. * Bolts, clamps, and tack-welds parts to secure in position for welding. * Test and inspect welded surfaces and structure to discover flaws * Repairs products by dismantling, straightening, reshaping, and reassembling parts. * Clean work area * Maintain equipment in a condition that does not compromise safety * Other duties may be assigned. * This job has no supervisory responsibilities. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to walk, climb or balance, and talk or hear. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. Minimum vision of 20/40 with corrective lenses. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts; high, precarious places; and fumes or airborne particles. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. The noise level in the work environment is usually loud. * 3+ years proven experience aluminum TIG/MIG welding * Must be able to lift 50 lbs. * Experience in using electrical or manual tools (saws, squares, calipers etc.) * Ability to read and interpret technical documents and drawings * Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.) * Deftness and attention to detail * Proficient in English * Successful completion of a relevant apprenticeship program preferred * Professional Certification (e.g. an AWS welding certificate) preferred * Knowledge of ISO-9001 QM System preferred REQUIRED COMPETENCY: To perform the job successfully, an individual should demonstrate the following competencies: * Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality. * Quantity - Meets productivity standards; completes work in timely manner; strives to increase productivity; works quickly. * Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly.

At SeaWorld, we're passionate about caring for animals. In fact, we've already rescued over 40,000 animals (and counting!). And we can save you from being stuck in just another job. Join us and help bring joy, excitement, and lasting memories to people from around the world. We're seeking enthusiastic, dedicated, and hard-working individuals to become our Ambassadors. Join us and play an important part on our incredible team! What you get to do: * Perform arc and gas welding, metal cutting and metal repair for all park USA properties. * Assist with the layout and repair of metal equipment necessary for park operation. * Always Execute welding safety and to comply with hot permit policy. * Perform maintenance inspections of rides. What it takes to succeed: * High school diploma or equivalent required. * Valid Driver's License. * Be certified in "4G" 3/8 plate and working toward a "6G" pipe certification. * At least 3 years of experience working with torches, flame welding, inert gas welding, electric arc welding required. * Have a working knowledge of all welding aspects. * Should have a basic knowledge of metal types. * General knowledge of gases and their safe application. * Able to work nights, weekends and holidays as required. * Proficient in the English language. * Basic mathematical skills are required, as well as adequate reading and writing skills. * Able to lift items 50 pounds or more with the assistance of others safely. * Able to stand on ladders for long periods of time. * Able to climb up various heights (200+ feet) on all types of ladders. * Have full mobility including ability to walk, sit, stand, stoop, climb, push, pull, bend and squat. * Ability to work rotating shifts to include nights, weekends, and holidays. Available to work overtime when required by supervisor or manager. The perks of the position: * Paid Time Off * Complimentary Park Tickets and Passes * Park Discounts on Food and Merchandise * Medical, Dental, and Vision Insurance * 401K Retirement plan * Voluntary Insurance * Life Insurance * Disability Benefits * Tuition Reimbursement * Dependent and Health Care Flexible Spending Accounts * Employee Assistance Program * Legal Assistance Plan EEO Employer: SEAWORLD PARKS & ENTERTAINMENT IS AN EQUAL OPPORTUNITY EMPLOYER. ALL APPLICANTS WILL BE CONSIDERED WITHOUT REGARD TO AGE, RACE, COLOR, RELIGION, SEX, NATIONAL ORIGIN, SEXUAL ORIENTATION, PREGNANCY, GENDER IDENTITY OR EXPRESSION, DISABILITY OR COVERED VETERAN STATUS.

Why Roswell? A brand. A family. A lifestyle. Roswell is driven by a family culture whereby innovation is not only encouraged but thrives. Everyone at Roswell is always pushing the boundaries of the industry to make beautiful and functional products that make boating and watersports a little more enjoyable each year. We are an air-conditioned shop. Job Summary / Objective The Welder will weld, cut, and braze metal pieces and products by using flame-cutting and hand welding equipment. Essential Job Functions and Duties Performs the welding process on aluminum, stainless steel, and steel parts and assemblies to required tolerances using welding metals and metal alloys and cutting, burning, and welding techniques and equipment. Determines layouts and weld parts and assemblies according to engineering drawings and specifications. Monitors the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage. Prepares, assembles, and tacks weld parts and surfaces to be welded. Maintains, organizes, and cleans equipment and the work area. Notifies supervisor when faulty equipment or defective materials are discovered. Required Competencies To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Effective Communication Skills - Good verbal and written communication skills. Ability to listen, understand, and follow directions. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Effective Problem Solving Skills. Demonstrates Integrity. Demonstrates respectful manner toward company, management and team members. Demonstrates a positive attitude. Required Education and Experience Minimum of a High School Diploma or GED Completion of a formal apprenticeship OR at least two (2) years' welding experience. Professional Certification (e.g. an AWS welding certificate) is preferred Additional Eligibility Requirements Post Offer Background check and drug screening may be required Work Schedule / Travel 5AM - 3:30 PM Monday - Thursday Overtime may be required depending on manufacturing needs Physical Requirements Must be able to grip fine contacts and wires with one hand and operate crimping tool with the other hand Must be able to see fine components and have manual dexterity to properly place and solder these components. • Safety Glasses must be worn at all times when in certain production areas. Enclosed non-skid shoes must be worn at all times when in the production areas. Must be able to stand for long periods of time. Must be able to weld components that are vertical, flat, or overhead. Must have enough manual dexterity and stability as required for precision work. Must be able to see details at close range. Must be able to regularly lift up to 25 pounds and occasionally lift up to 50 pounds. Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. While performing the duties of this Job, the employee will frequently be in close proximity to extremely hot parts or oven heat that could exceed 500 degrees, and be exposed to enclosed areas, heights, and awkward positions, dust, burns, & arc flashes; while understanding and utilizing proper Personal Protective Equipment to ensure all personal safety risks are mitigated. Direct Reports • None Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

We are looking for a skilled Welder to cut and join metals and other materials at our facilities or construction sites. You will operate appropriate equipment to put together mechanical structures or parts with a great deal of precision. Your job is important as it provides the foundation for strong infrastructure. A welder must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will also have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is essential. Responsibilities Read blueprints and drawings and take or read measurements to plan layout and procedures Determine the appropriate welding equipment or method based on requirements Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) Operate angle grinders to prepare the parts that must be welded Align components using calipers, rulers etc. and clamp pieces Weld components using manual or semi -automatic welding equipment in various positions (vertical, horizontal or overhead) Repair machinery and other components by welding pieces and filling gaps Test and inspect welded surfaces and structure to discover flaws Maintain equipment in a condition that does not compromise safety Requirements Proven experience as welder Experience using a variety of welding equipment and procedures (TIG, MMA etc.) Experience in using electrical or manual tools (saws, squares, calipers etc.) Ability to read and interpret technical documents and drawings Knowledge of relative safety standards and willingness to use protective clothing (face -shield, gloves etc.) Deftness and attention to detail Proficient in English Successful completion of a relevant apprenticeship program is required Professional Certification (e.g. an AWS welding certificate) will be a plus

Job Description We are seeking a skilled Welder to cut and join metals and other materials at our manufacturing facility. This position requires proficiency in operating potentially dangerous equipment with strict adherence to safety protocols. The ideal candidate will possess a steady hand, strong attention to detail, and comprehensive knowledge of various metals and their properties. Essential Duties and Responsibilities Read and interpret blueprints, drawings, and specifications to determine job requirements. Take accurate measurements to plan layout and procedures. Select appropriate welding equipment or techniques based on project needs. Set up components and prepare parts for welding using angle grinders or other tools. Align and clamp components using calipers, rulers, and other measuring devices. Weld components using manual or semi-automatic equipment in various positions (vertical, horizontal, overhead). Perform repairs on machinery or other components by welding and gap filling. Inspect welded surfaces and structures to identify flaws and ensure quality standards. Maintain welding equipment in safe working condition. Supervisory Responsibilities This position does not have direct supervisory responsibilities but requires the ability to work independently and collaborate with team members to meet production goals. Minimum Qualifications Proven experience as a professional welder (minimum of 5 years in a manufacturing environment). Proficient in various welding techniques and equipment (e.g., TIG, MMA). Skilled in the use of both electrical and manual tools (e.g., squares, calipers). Ability to read and interpret technical documents and engineering drawings. Strong attention to detail and hand-eye coordination. Proficient in English (oral and written communication). Completion of a recognized welding apprenticeship program. Preferred Qualifications CWI or CRAWL certification. AWS Professional Welding Certification. Experienced with both MIG and TIG Physical Demands Must be able to lift up to 50 lbs. Must be able to work in physically demanding environments, including standing for long periods and performing overhead welding tasks.

Full Job Description The Industrial Certified Fabricator/Welder sets up and operates manually controlled machines in skilled precision and bench work in the fabrication, maintenance, repair and alteration of machinery, machine parts, tools, and equipment. Responsibilities: Machinist and Maintenance Uses precision tools, machinery, and equipment such as lathe, vertical milling machine, drill press, hydraulic press, chop saw, band saw and a variety of cutting and welding equipment such as TIG, MIG and Oxy-Acetylene. Fabricates and shapes parts such as tools and machine parts out of metal, plastics, and composites Properly and safely selects, aligns, secures, and removes holding fixtures, cutting tools, attachments, accessories and materials onto machines Positioning, aligning, fitting, and welding parts for the formation of subunits or complete units using jigs, hand tools, and welding torches. Experience in stick welding, oxygen/acetylene torch use along with mig/tig experience. Recognizes, deploys, and properly uses inserts, fixtures, and tooling. Repairs manufacturing, packaging and material handling equipment when needed. Providing detailed instructions, specifications, drawings or documentation to explain others about how the components are to be constructed, modified, maintained, assembled, or fabricated. Studying blueprints and engineering drawings to determine project task sequences and requirements. Assists in maintaining an acceptable level of housekeeping. Communications Assists in maintaining an accurate inventory and maintenance logs through activities such as: proper reporting of parts inventory usage, tracking of time worked on E-maintenance, minimizing waste, reporting any spills or unique situations that adversely impact operations. Maintain various production logs to record downtime/issues which arise during assignment. Completes all required paperwork (timesheets, quality sheets,) accurately Safety Works in a safe manner following all departmental and plant safety rules. Responsible for immediately reporting any unsafe work conditions to work leader, supervisor, or management. Other Duties Actively participates in various committees/teams to improve processes. Works in various other areas as required by business needs. Qualifications Specialty Training Beyond High School Machinist Journeymen's status required Journeymen's Certification/License 3-5 years of experience in manual machine shop equipment such as mill and lathe. Previous experience with workshop and power tools related to mechanical work recommended Previous experience with forklift, scissor lift and/or man lift recommended Exposed to high voltage electricity and excessive heat Ability to push, pull, or lift heavy objects and/or machine parts with or without assistance Work Environment & Physical Responsibilities: Duties are performed in a loud production setting subject to extreme temperatures. Some duties may be required to be performed outside. Comfortable with repetitive movement, kneeling, crouching and stooping. Requires using hands to handle, control, or feel objects, tools or controls. Requires lifting up to 50 pounds while bending, twisting and/or standing.

About Us: CT Mechanical, a division of Comfort Temp Company, has proudly provided exceptional mechanical contracting solutions since 2014. We specialize in comprehensive services across plumbing, HVAC, and mechanical piping systems for both commercial and residential projects. With a foundation built on family values and professionalism, our team operates from offices in Gainesville, Jacksonville, Orlando, and Tampa-delivering trusted results across Florida. Job Summary: CT Mechanical is hiring a Certified Welder/Pipefitter Combo with strong skills in both pipefitting and certified welding techniques. This dual-role position plays a vital part in the successful installation, assembly, and welding of mechanical piping systems on commercial job sites. The ideal candidate will bring high-level expertise in reading blueprints, welding to code, and managing complex mechanical layouts, while also mentoring apprentices and working collaboratively within project teams. Key Responsibilities: * Install and weld piping systems per specifications, drawings, and codes (SMAW, GTAW, MIG). * Select appropriate type and size of pipe, fittings, and materials for each project. * Perform field measurements, layout, cutting, and preparation of piping for welding or fitting. * Thread, groove, solder, or braze pipe as required. * Weld and fabricate various piping systems including carbon steel, stainless steel, and copper. * Conduct pressure and leak testing on completed welds and pipe systems. * Interpret and work from blueprints, isometric drawings, and P&IDs. * Secure piping systems with supports such as clamps, hangers, and brackets. * Follow all safety standards and welding procedures (ASME, AWS, OSHA). * Coordinate with Project Managers and Engineers on installation sequencing. * Supervise and mentor apprentices and helper-level workers. * Maintain accurate documentation on weld logs, material usage, and inspections. Qualifications: * High school diploma or GED required. * Minimum 5 years of combined experience in pipefitting and welding in commercial or industrial environments. * Certified Welder (AWS or ASME)-must be able to pass company welding test prior to employment. * Strong experience with carbon steel, stainless steel, and copper pipe systems. * OSHA 10 required; OSHA 30 preferred. * Ability to gain clearance to work on state and federal properties. * Skilled in reading technical manuals, schematics, and blueprints. * Excellent hand-eye coordination and physical stamina for field work. * Demonstrated leadership experience or willingness to mentor apprentices. * Must pass background check and drug screening. Company Culture: At CT Mechanical, we lead with purpose and pride. Our values-Do what you say. Do what it takes. Do it with purpose. Do the right thing.-reflect the integrity and excellence we bring to every project. We support career growth, team development, and a work environment where your skills and dedication are recognized and rewarded. How to Apply: Ready to bring your welding and pipefitting talents to a company that values craftsmanship and character? Email your resume and a brief cover letter to *********************** to apply.

We are seeking skilled welders to join our team. This position involves working with MIG and TIG welding techniques on aluminum and stainless steel. The work schedule is Monday through Friday, 1st Shift. **Responsibilities** + Perform MIG and TIG welding on aluminum and stainless steel. + Read and interpret blueprints to execute precise welding tasks. + Conduct fabrication work as required. + Pass weld tests to demonstrate proficiency and quality of work. **Essential Skills** + Proficiency in MIG and TIG welding techniques. + Ability to read and interpret blueprints. + Experience in welding aluminum and stainless steel. + 2+ years of welding experience is preferred, but entry-level candidates with appropriate training are welcome. **Additional Skills & Qualifications** + Experience with blueprint reading and fabrication work. + Capability to successfully pass a weld test. **Job Type & Location** This is a Contract to Hire position based out of St. Cloud, FL. **Pay and Benefits** The pay range for this position is $18.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in St. Cloud,FL. **Application Deadline** This position is anticipated to close on Dec 16, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

A successful candidate should have a welding certification in D1.1 2G/3G with applicable experience, willingness to learn, and ability to interpret fabrication and construction drawings. Requirements: 2+ years of experience in steel fabrication Prior Experience Operating Overhead Cranes Prior welding experience in Flux Core 2G/3G Certification preferred Must pass a weld test that meets AWS standards Must be flexible to work any schedule needed including overtime and Saturdays as needed Job Duties: Weld structural steel parts as per drawings and marked-up weld symbols. Maintain and obtain required welding certifications, ensuring compliance with AWS standards. Achieve and maintain welder qualifications per AWS standards. Conduct visual inspections of welded components to confirm quality and accuracy. Safely operate overhead cranes, air arc tools, grinders, magnetic drills, and other welding-related equipment. Communicate with team members to ensure quality control and completeness of work. Follow all safety procedures and policies, ensuring work is done in a safe and secure manner. Maintain cleanliness and organization in the work area, including trash and scrap removal and other production-related tasks. Perform routine equipment maintenance as needed. Benefits: Health/dental/vision/disability insurance Paid time off Paid holidays 401k with employer match and 100% vesting from the beginning Paid weekly Company Paid Life Insurance Selected applicant will be subject to a pre-employment physical with drug/alcohol testing.

Job Description Welder compensation range (based on experience level) $22- $37/hr Welder I($22/hr-$24/hr) · Attains familiarity with Piper QAM/QIM and FAA requirements. · Perform TIG welding of aluminum and steel parts. · Understands standards and criteria required to inspect and buying off own work using Piper inspection certifications. · Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Partner with senior teammates within career path to receive and share practical knowledge for proper training to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform duties as assigned by supervision. Welder II($25/hr-$27/hr) · Maintaining compliance with Piper QAM/QIM and FAA requirements. · Performing TIG welding of less complex aluminum and steel parts such as tow bars and seat handles. · Inspect and buying off own work using Piper inspection certifications. · Ability to and willingness to receive and share practical knowledge, train, and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere, maintain and assist teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform duties of lower graded position within Career Path and other duties as assigned by supervision. Senior Welder II($28/hr-$30/hr) · Maintaining compliance with Piper QAM/QIM and FAA requirements. · Performing TIG welding of less complex aluminum and steel parts such as Tow bars and seat handles. · Inspect and buying off own work using Piper inspection certifications. · Serves as lead with the ability to guide and willingness to receive and share practical knowledge, train, cross-train and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere, maintain, assist and train teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform audits of areas within the department as required to maintain compliance with all FAA and Piper operational requirements. Initiate related operational process or procedural corrective action, or request additional assistance from leadership or other support teams where necessary. · Perform duties of lower graded position within Career Path and other duties as assigned by supervision Structural Welder I($28/hr-$30/hr) · Maintaining compliance with Piper QAM/QIM and Faa requirements. · Performing TIG structural welding of complex aluminum, steel, and stainless-steel welded structures including oil collector tanks and air boxes. · Inspect and buying off own and other Team Mate's work using Piper inspection certifications · Assisting in addressing departmental quality concerns to resolve them expeditiously and in a cost-effective manner. · Helping troubleshoot and re-work discrepancies as necessary directed by the Supervisor or Team lead · Providing technical assistance for other teammates & Piper's Manufacturing Support Teams. · Conducting training and cross training of teammates to attain acceptable levels of performance. · Provides assistance when required during new product development, design, build and testing. · Partner with senior teammates within career path to receive and share practical knowledge for proper training to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere and maintain all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform duties as assigned by supervision. Structural Welder II($34/hr) · Maintaining compliance with Piper QAM/QIM and FAA requirements. · Performing TIG structural welding of complex and intricate aluminum, stainless steel and steel parts including engine mounts & other aircraft assemblies. · Assisting in addressing departmental quality concerns to resolve them expeditiously and in a cost-effective manner. · Helping troubleshoot and re-work all major discrepancies as necessary. · Inspect and buying off own and other teammates work using Piper inspection certifications. · Providing technical assistance for other teammates & Piper's Manufacturing Support Teams as well as vendors, equipment suppliers, etc. when appropriate. · Conducting training and cross training of teammates to attain acceptable levels of performance. · Assisting with continuous improvement efforts to enhance the Team's performance including schedule delivery performance, reduction of late work, elimination of quality defects & scrap, productivity improvement initiatives and cost reductions. · Works with other manufacturing areas to ensure production readiness for design changes. Provides assistance when required during new product development, design, build and testing. · Ability to and willingness to receive and share practical knowledge, train, and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere, maintain and assist teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform duties of lower graded position within Career Path and other duties as assigned by supervision Senior Structural Welder ($37/hr) · Maintaining compliance with Piper QAM/QIM and FAA requirements. · Performing TIG structural welding of all complex, intricate aluminum, stainless steel and steel parts · Interfacing with other departments regarding quality concerns to resolve expeditiously and in a cost-effective manner. · Troubleshooting and re-working all major discrepancies as necessary · Inspect and buying off own and other teammates work using Piper inspection certifications. · Acting as a technical liaison between teammates & Piper's Manufacturing Support Teams as well as vendors, equipment suppliers, etc. when appropriate. · Conducting or coordinating training and cross training of teammates to attain acceptable levels of performance. · Driving continuous improvement efforts to enhance the team's performance including schedule delivery performance, reduction of late work, elimination of quality defects & scrap, productivity improvement initiatives and cost reductions. Assists with data collection, review and report generation. · Working with other manufacturing areas to ensure production readiness for design changes. Provides assistance when required during new product development, design, build and testing. · Serves as lead with the ability to guide and willingness to receive and share practical knowledge, train, cross-train and mentor teammates within career path to perform necessary job functions and requirements in order to attain satisfactory levels of performance and production effectivity. · Adhere, maintain, assist and train teammates within career path to all departmental compliance requirements such as Safety, Environmental Protection, FOD and Tool Control, 5S and other assigned programs. · Perform audits of areas within the department as required to maintain compliance with all FAA and Piper operational requirements. Initiate related operational process or procedural corrective action, or request additional assistance from leadership or other support teams where necessary. · Perform duties of lower graded position within Career Path and other duties as assigned by supervision Minimum Qualifications · High school diploma or equivalent · Successful completion welding program or 2 years' experience preferred · Related welding experience requirements: o Welder I: ≤ 2 years of experience o Welder II: 2 - 5 years of experience o Senior Welder: ≥ 5 years of experience o Structural Welder I: ≤ 2 years of experience o

**About Us** At ENFRA, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At ENFRA, stability, innovation, and growth are more than just values they are the pillars of our continued success. **Overview** The Welder will be welding of rebar of all sizes. Fabricate rack brackets, supports and junction boxes, miscellaneous repairs to equipment, trailers and job shacks and other company owned items, equipment and vehicles. **Responsibilities** + Welds together components of products specified by layout, blueprints, diagram, and work order, welding procedures or oral instructions. + Sets controls on welding machine in conformance with WPS. + May weld in flat, horizontal, vertical, or overhead positions as qualified. + Must be able to read a tape measure. + Tack assemblies together using approved WPS. + Adheres to all company health, and safety policies. + Work in a safe manner. + Maintain a clean and organized workspace. **Qualifications** + Must be qualified under AWS D1.1 code for Overhead (4G) and Vertical (3G) using SMAW + Must pass welding test. + Experience working with stainless and carbon steel. + Experience working with overhead cranes. + High school diploma or equivalent. + Must be able to lift up to 50 lbs. + Must be able to understand fractions, decimals, and degrees of a circle. + General knowledge of structural members ( beams, channel, angle, pipe, and tubing + OSHA 10 or 30 hour preferred + Noisy environment + Climbing stairs. + Operating machinery and/or power tools + Remaining in a stationary position, often standing or sitting for prolonged periods + Medium work that includes adjusting and/or moving objects up to 50 pounds + 5-10% of time will be spent traveling to job site(s)/office location. **Pay Range** USD $28.00 - USD $32.00 /Hr. ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law. Submit a Referral (********************************************************************************************************** **Job Locations** _US-FL-Orlando_ **ID** _2025-8809_ **Category** _Skilled Craft_ **Position Type** _Full-Time_ **Remote** _No_

Full Job Description The Industrial Certified Fabricator/Welder sets up and operates manually controlled machines in skilled precision and bench work in the fabrication, maintenance, repair and alteration of machinery, machine parts, tools, and equipment. Responsibilities: Machinist and Maintenance Uses precision tools, machinery, and equipment such as lathe, vertical milling machine, drill press, hydraulic press, chop saw, band saw and a variety of cutting and welding equipment such as TIG, MIG and Oxy-Acetylene. Fabricates and shapes parts such as tools and machine parts out of metal, plastics, and composites Properly and safely selects, aligns, secures, and removes holding fixtures, cutting tools, attachments, accessories and materials onto machines Positioning, aligning, fitting, and welding parts for the formation of subunits or complete units using jigs, hand tools, and welding torches. Experience in stick welding, oxygen/acetylene torch use along with mig/tig experience. Recognizes, deploys, and properly uses inserts, fixtures, and tooling. Repairs manufacturing, packaging and material handling equipment when needed. Providing detailed instructions, specifications, drawings or documentation to explain others about how the components are to be constructed, modified, maintained, assembled, or fabricated. Studying blueprints and engineering drawings to determine project task sequences and requirements. Assists in maintaining an acceptable level of housekeeping. Communications Assists in maintaining an accurate inventory and maintenance logs through activities such as: proper reporting of parts inventory usage, tracking of time worked on E-maintenance, minimizing waste, reporting any spills or unique situations that adversely impact operations. Maintain various production logs to record downtime/issues which arise during assignment. Completes all required paperwork (timesheets, quality sheets,) accurately Safety Works in a safe manner following all departmental and plant safety rules. Responsible for immediately reporting any unsafe work conditions to work leader, supervisor, or management. Other Duties Actively participates in various committees/teams to improve processes. Works in various other areas as required by business needs. Qualifications Specialty Training Beyond High School Machinist Journeymen's status required Journeymen's Certification/License 3-5 years of experience in manual machine shop equipment such as mill and lathe. Previous experience with workshop and power tools related to mechanical work recommended Previous experience with forklift, scissor lift and/or man lift recommended Exposed to high voltage electricity and excessive heat Ability to push, pull, or lift heavy objects and/or machine parts with or without assistance Work Environment & Physical Responsibilities: Duties are performed in a loud production setting subject to extreme temperatures. Some duties may be required to be performed outside. Comfortable with repetitive movement, kneeling, crouching and stooping. Requires using hands to handle, control, or feel objects, tools or controls. Requires lifting up to 50 pounds while bending, twisting and/or standing.

A successful candidate should have a welding certification in D1.1 2G/3G with applicable experience, willingness to learn, and ability to interpret fabrication and construction drawings. Requirements: 2+ years of experience in steel fabrication Prior Experience Operating Overhead Cranes Prior welding experience in Flux Core 2G/3G Certification preferred Must pass a weld test that meets AWS standards Must be flexible to work any schedule needed including overtime and Saturdays as needed Job Duties: Weld structural steel parts as per drawings and marked-up weld symbols. Maintain and obtain required welding certifications, ensuring compliance with AWS standards. Achieve and maintain welder qualifications per AWS standards. Conduct visual inspections of welded components to confirm quality and accuracy. Safely operate overhead cranes, air arc tools, grinders, magnetic drills, and other welding-related equipment. Communicate with team members to ensure quality control and completeness of work. Follow all safety procedures and policies, ensuring work is done in a safe and secure manner. Maintain cleanliness and organization in the work area, including trash and scrap removal and other production-related tasks. Perform routine equipment maintenance as needed. Benefits: Health/dental/vision/disability insurance Paid time off Paid holidays 401k with employer match and 100% vesting from the beginning Paid weekly Company Paid Life Insurance Selected applicant will be subject to a pre-employment physical with drug/alcohol testing.