Welder jobs in Piscataway, NJ - 32 jobs

Welder/Fabricator Location: Hillside, NJ (Port Newark Facility) Employment Type: Position will be full time 40 hrs. min per week, based in Port Newark, NJ. Schedule: 40+ hours per week; weekends and holidays as needed Donjon Marine, LLC, an established and expanding New Jersey-based Salvage and Diving company , is seeking an experienced, safety-driven, and reliable candidate to fill the role of a generic welder/fabricator in our Salvage Team. This is not a typical welder/fabricator position-each of our team members are also salvors . Welding and Fabrication is one of many tools used to support complex salvage operations, and not all projects involve welding/fabrication. This “dual hatted” selected individual will play a key role both offshore and shoreside , to include welding/fabrication for projects supporting salvage operations and shop work, being able to weld Primary Responsibilities Perform high-quality welding on various materials (steel, aluminum, stainless steel, etc.) using MIG, TIG, and Stick welding processes. Conduct plasma cutting and oxy-acetylene and propane torch work for fabrication, repair, and salvage operations Fabricate and repair metal components, frames, and structures for vessels, barges, and marine equipment. Welding of padeyes and lashing brackets on different floating assets to support offshore operations. Assist with marine salvage operations , including cutting, rigging, lifting, and structural recovery tasks. Work safely and effectively in challenging environments , including on the water on crane barges, docks, and offshore job sites. Operate and maintain welding, burning, and cutting equipment, ensuring all tools are in good working condition. Collaborate closely with team members during heavy lift, dive, and salvage operations. Follow all safety protocols, company procedures, and maritime regulations . Participate in the setup, mobilization, and demobilization of gear and work platforms for each project. Support other departments when necessary, including general maintenance and field fabrication tasks. Required Qualifications High school diploma / GED Valid driver's license TWIC (or ability to obtain) Minimum 2-4 years of welding experience Strong supervisory, communication, and organizational skills. Ability to travel for extended durations on domestic and international projects. Capable of lifting up to 50 lbs and working in all weather and marine conditions. Must pass pre-employment drug testing and background screening . Preferred Attributes Experience in working in the marine industry to include marine construction, vessel recovery, and wreck removal . AWS or equivalent welding certs a plus (not required) Key Competencies Strong teamwork and communication skills - able to work effectively in small crews in dynamic field conditions. Excellent problem-solving and adaptability under pressure. Physical ability to lift and move heavy materials and work in physically demanding environments. Self-motivated and reliable with a strong work ethic and positive attitude. Commitment to safety and attention to detail in all aspects of work Dependability & Adaptability Compensation and Benefits Base Salary Range: $30-$40 dollars / hr. (Actual compensation will depend on experience, education, and qualifications.) Donjon Marine offers a comprehensive benefits package that ranks among the best in the industry, including: Medical, dental, and vision coverage for employees and dependents. Wellness and employee assistance programs. Life and disability insurance. 401(k) retirement plan with company matching. Generous paid time off and holiday schedule.

Job DescriptionSalary: $20-40 DOE We are seeking a skilled and reliable Welder to join our team. In this role, you will be responsible for performing welding repairs and maintenance on heavy equipment, trucks, and related machinery for a site work company. You will handle on-site and in-shop welding tasks, ensuring the safety, efficiency, and operability of our equipment. Benefits: Medical Insurance paid by Esposito Construction for single rate. 401(k) eligibility with company contribution. Dental insurance eligibility. Vision insurance eligibility. Paid time off. Pay: Flexible, experience based Key Responsibilities: Perform welding repairs and fabrication on heavy equipment (excavators, loaders, dozers) and trucks, addressing structural damages, cracks, and wear. Travel to job sites to provide on-site repairs and troubleshooting for equipment breakdowns. Collaborate with mechanics and operators to assess and identify welding needs. Utilize various welding techniques (MIG, TIG, stick welding, etc.) to repair or fabricate parts and components. Operate tools such as torches, grinders, and plasma cutters to cut and prepare metal. Inspect welds to ensure they meet safety and quality standards. Maintain welding equipment and ensure compliance with safety protocols. Read and interpret blueprints, schematics, and technical drawings to perform repairs. Assist in preventive maintenance tasks to minimize equipment downtime. Qualifications: High school diploma or GED required; technical certification in welding preferred. Proven experience as a welder, preferably working with heavy equipment and trucks. Proficiency in MIG, TIG, and stick welding, with knowledge of various metals (steel, aluminum, etc.). Ability to read and interpret technical drawings and schematics. Strong problem-solving skills and attention to detail. Willingness to travel to job sites and work in varying weather conditions. Valid drivers license required; CDL preferred but not required. Ability to lift heavy materials and work in physically demanding environments. Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Job DescriptionBenefits: 401(k) Bonus based on performance Company parties Competitive salary Dental insurance Employee discounts Free uniforms Health insurance Opportunity for advancement Paid time off Smart Truck Equipment is currently recruiting a professional truck body installer, welder, and fabricator responsible for upgrading commercial trucks with various bodies and equipment. As a family-owned enterprise, we provide installation, servicing, and repair of commercial truck equipment. Our team of technicians specializes in installing hook lifts, Switch N Go systems, dump beds, flatbeds, among other components. Candidates should possess a minimum of two years of relevant experience. The majority of duties involve installing new truck bodies on both new and nearly new truck chassis. We function as a second-stage manufacturer for Ford and Ram trucks; additionally, our affiliated company is an Isuzu commercial truck dealer, although we service all makes and models. Our technicians benefit from superior benefits and operate within a collaborative team environment. Our facility is equipped with state-of-the-art technology and maintains a clean, professional appearance. Our objective is to foster a welcoming, transparent, and positive environment for both our personnel and clients. We recognize that our employees are our most valuable asset. We invite you to join our team. Responsibilities Management Skills and all skills needed to Upfit Commercial Trucks Fabrication Skills Assembly Skills Hydraulics Electrical Qualifications 2+ years of MIG solid wire welding experience 2+ years of experience in commercial truck electrical and lighting systems. Knowledge of shop tools: bench grinder, drill press, band saw, Ironworker, etc. Benefits Free Uniforms Company Funded 401k Healthcare, Dental, Life Insurance Company paid life insurance PTO- Paid Time off Paid Vacations and Holidays Free Training $20-$36 per hr, depending on experience Great team atmosphere We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Trucksmart, Inc. Job Type: Full-time Pay: $20.00 - $36.00 per hour Signing bonus for the right candidate Schedule: 8-hour shift Overtime Experience: Background in Upfitting Commercial Trucks Welding: 2 year (Preferred) Fabrication: 2 year (Preferred) Work Location: In person

General Machine Company of NJ is a fourth generation, family-owned manufacturing company in Middlesex, New Jersey, specializing in high-quality industrial blenders and dryers. We are seeking a motivated, experienced welder. As part of our team of professionals, you construct and manufacture metal parts and products, taking particular care to produce clean, polished welds. You follow blueprints, determine material measurements, and take responsibility for fabricating parts used in later assembly processes. Stainless Steel Sanitary Welding of Pipe and couplers, sheet, fittings and bracketry for Pharmaceutical Equipment. To apply, send a copy of your resume with the results from a disc assessment from ****************************** to ******************. Responsibilities/Requirements: Fabricate and manufacture metal parts for later assembly (including Carbon steel, Stainless-steel, pipe, and tubing) Follow blueprints to ensure exact specifications of output. Produce strong, clean welds. Test output to ensure strength and tolerance of welds. Must be experience in welding tools and procedures including, MIG welding, TIG welding, STICK welding, meal fabrication, grinding, and finishing metals. Polishing experience, a plus 4+ years' experience welding, preferably in a manufacturing environment. Ability to stand, crouch, and occasionally lift heavy equipment. Must maintain equipment and clean tools and work area. Must be authorized to work in the U.S. Must be located in New Jersey or within commuting distance. Please Note: GEMCO does not offer remote work, relocation assistance, or visa sponsorship. Candidates must be legally authorized to work in the U.S. and reside within commuting distance of Middlesex, NJ.

Job DescriptionDescription: Senior Welder Falcon Manufacturing, a division of NOA Brands America, Inc., is a custom fabrication facility for sheet metal, tubing, and wire components. Falcon provides economic manufacturing to large volume clients through our highly trained staff, advanced manufacturing technology, on-time delivery, and competitive pricing. Falcon is looking to add a Senior Welder to our Welding Department. Responsibilities: · Weld metal part according to blueprints specification using TIG/MIG · Inspect materials to be welded · Set up, operate and maintain equipment · Use of hand tools · Run repetitive production parts as needed. · Maintains work area · Perform other related duties or work at a different workstation as production needs require. Requirements: · Minimum 3 years of experience in manufacturing · Minimum 5 years of experience in TIG and MIG welding · High School Diploma or Equivalent · Ability to read engineering drawings and weld symbols. · Ability to read blueprints and measure parts. · Ability to meet productivity standards, completing work in timely manner · Ability to work independently and in a team environment · Ability to thrive in an evolving, fast-paced, deadline-driven environment · Ability to lift, push, or pull up to 25 lbs., occasionally up to 50 lbs. and more · Dependable · Detail oriented · Energetic and eager to learn Bonus Points: Experience in metal shop production Experience in welding aluminum/stainless steel Experience with Miller Welding Robot Basic Microsoft Office (Word, Outlook) Location: Somerset, NJ Job Type: Full-time, 1st shift Monday to Friday, from 6:00am to 2:30pm Overtime as needed Benefits · Medical/Dental/Vision Insurance · Company Paid Basic Life and AD&D Insurance · Voluntary Benefits (Supplemental Life Insurance, LegalShield, and more) · Company Paid Long-term Disability Insurance · 401K with Company Match · Paid Vacation and Sick Time · 9 Paid Holidays Pay: hourly from $22.00 to $28. 00-DOE

Job Description Seeking entry level welder to learn and grow. Reports to: Welding supervisor & Manager Responsibilities: cleaning, cutting, brushing, grinding, tacking, fitting, welding, using MIG & Stick Minimum Educational Qualifications High school Diploma /GED Minimum Previous Experience 1 year experience in shop setting

The Container Welder/ Fabricator repairs, paints and performs maintenance to containers and roll-off boxes. PRINCIPAL RESPONSIBILITIES: Performs repairs and maintenance on front, rear and roll-off containers Weld steel and aluminum components using MIG and ARC welding Equipment. Fabricates steel components using a brake and shear. Cuts steel using a plasma cutter or torch. Fabricates steel components for hoppers, containers and compactors. Installs lids and wheels on containers. Paints repaired containers. Follows all safety policies and procedures. Completes required paperwork. Install company and safety decals in accordance with company standard diagram on containers and roll-off boxes. Performs other job-related duties as assigned. Refer more complex repairs to the Supervisor. QUALIFICATIONS: Certified welder. Advanced knowledge of mig &stick welders, plasma cutter, and airless paint Sprayers. Familiar with basic use of hand tools. Excellent written and verbal communication skills. Ability to follow directions with minimal supervisory involvement. MINIMUM REQUIREMENTS: Minimum of 1 year welding experience OR COMPLETION OF A WELDING PROGRAM. $20.80 Bonus Plan Details (if applicable): Rewarding Compensation and Benefits Eligible employees can elect to participate in: • Comprehensive medical benefits coverage, dental plans and vision coverage. • Health care and dependent care spending accounts. • Short- and long-term disability. • Life insurance and accidental death & dismemberment insurance. • Employee and Family Assistance Program (EAP). • Employee discount programs. • 401(k) plan with a generous company match. • Employee Stock Purchase Plan (ESPP). • Paid Time Off (PTO) • Benefits ********************************************************* The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company. EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law. ABOUT THE COMPANY Republic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world. In 2023, Republic's total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills. Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer. Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it. Our company values guide our daily actions: Safe: We protect the livelihoods of our colleagues and communities. Committed to Serve: We go above and beyond to exceed our customers' expectations. Environmentally Responsible: We take action to improve our environment. Driven: We deliver results in the right way. Human-Centered: We respect the dignity and unique potential of every person. We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGY Republic Services' strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers' multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation. With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers. Recycling and Waste We continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers' specific needs. Environmental Solutions Our comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need. SUSTAINABILITY INNOVATION Republic's recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth. The Republic Services Polymer Center is the nation's first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America. We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028. RECENT RECOGNITION Barron's 100 Most Sustainable Companies CDP Discloser Dow Jones Sustainability Indices Ethisphere's World's Most Ethical Companies Fortune World's Most Admired Companies Great Place to Work Sustainability Yearbook S&P Global

Based in St. Louis, Core & Main is a leader in advancing reliable infrastructure™ with local service, nationwide . As a specialty distributor with a focus on water, wastewater, storm drainage and fire protection products and related services, Core & Main provides solutions to municipalities, private water companies and professional contractors across municipal, non-residential and residential end markets, nationwide. With over 370 locations across the U.S., the company provides its customers local expertise backed by a national supply chain. Core & Main's 5,700 associates are committed to helping their communities thrive with safe and reliable infrastructure. Visit coreandmain.com to learn more. YOU love playing a vital role in completing customer projects that can directly save lives. You enjoy working with your hands and take pride in your workmanship. You can weld various fittings to different sizes of pipe and welding joints. You have excellent attention to detail and can spot deficiencies. ARE you able to weld with manipulators, positioners, and free hand? Are you able to read CAD or hand drawings to calculate and accurately measure, cut, fit-up, and align piping for the welding of various configurations? Are you a certified Welder with experience in code welding? HERE at Core & Main, we value the individual, and the unique contributions you bring. Here we support and encourage continued learning. Here we invest in the development and well-being of our people, who are the key to our future. Here we value diversity and want to ensure each voice is heard. Here, our team members thrive as a community. Preferably, YOU have: 1+ year of welding experience Certification in pressure pipe welding HERE, we have: Medical with 100% preventative care coverage Health Savings Account Dental and Vision 401K Tuition Reimbursement and Tuition Grants Continued learning opportunities through our onsite training facility and extensive online learning catalog Professional development and industry networking opportunities, e.g. Our Women's Network and community engagement events Pay: $17.42 - $23.24 per hour Core & Main is an Equal Employment Opportunity employer. Employment at Core & Main is based solely on a person's merit and qualifications directly related to professional competence. Core & Main does not discriminate against any employee or applicant on the basis of race, creed, color, religion, national origin, nationality, ancestry, age, disability, veteran status, pregnancy or related condition (including breastfeeding), affectional or sexual orientation, gender identity or expression, marital status, status with regard to public assistance, citizenship, or any other basis protected by law. None of the questions in this application are intended to elicit information regarding any protected characteristics, nor imply any limitation, illegal preferences or discrimination based upon non-job-related information or protected characteristics. For more information, please click here or visit ********************

Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. **Travel is Required for this position 75% of the time** Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned.

P.H. Works, Inc. is looking to hire a Welder fabricator with a great attitude. Proficient welding and fabrication skills to join metal parts according to print, sketch, or verbal instructions Ability and skill to setup and operate machine tools to cut and shape light gauge material safely and proficiently Fit-up and polishing experience Must have the ability to read and work off blueprints Ability to communicate and work well with others in a spirit of cooperation and teamwork Required: OSHA 30 & 10-Hour F60 & G60 Valid Drivers License - with minimal to no moving violations in the last 3 years We offer: • Competitive Salary • Paid Weekly • Paid Time Off • Health Benefits

Job DescriptionA Commercial/Industrial Contractor is seeking a highly motivated Welder/Fabricator to work alongside our crew to ensure job is completed in a professional, neat and timely manner to meet scope of work timelines. 1. Have advanced skills in all processes and positions of welding 2. Looking for a seasoned individual with 3-5 years proven commercial/industrial experience 3. The ideal candidate will be able to read blueprints, specialize in structural commercial/industrial projects and site plans 4. The individual in this role is responsible for working with materials and equipment and possessing knowledge of job-site conditions and safety 5. The individual has the ability to work alone or alongside a crew 6. The ideal candidate should demonstrate problem solving skills 7. OSHA training, a plus 8. Willing to perform other tasks 9. Must have a valid/clean drivers license

Job Description We are seeking a part-time Welding Instructor who will work alongside the senior instructor, communicate well with other Instructors, and follow the curriculum and provide assistance to students receiving instruction in the Welding Lab. The (PT) welding Instructor will work under the guidance of the Industry and Trades Coordinator. Available hours Mon & Tuesday 8:30 am-2:30pm. Possibly more in fall. This is a part-time, hourly position. EXAMPLE OF DUTIES: Prep, weld, and visually inspect welds on all materials and processes. Weld, fabricate and cut, all materials, including mild, stainless, and aluminum. Guide student learning both in the classroom and welding lab. Facilitate workshop sessions as needed. Perform other duties as assigned. Qualifications: Current welding certification/completion from (AWS), Trade School, 900 hour or equivalent welder/fabricator course or 15 years documented experience. Candidate must possess knowledge of welding theory, welding code requirements, and certification mandates. Strong fundamentals and respects, follows and enforces safety protocols. Ability to work with students of diverse abilities and backgrounds in various learning settings. Be able to pass a multi process welding and cutting Evaluation. 5 years of experience in fabrication, fitting, iron work, welding, cnc, pipe, and related metal working industries civilian and military. Bend test, osha, torch and fire watch certifications, or DOT Certifications ARE required. Do not apply if you don't have a min of 3G in @ least 2 Processes. Comfortable demonstrating and instructing SMAW, GMAW, FCAW, GTAW, Plasma, Oxy-fuel in all positions. Compensation: The hourly pay for this position is $28. Benefits: New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.) Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance. Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses. NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)

Join Henderson Products Inc., located at 94 N. Dell Ave, Kenvil, NJ! We are the North American leader in the design, manufacture and up fit of multi-purpose equipment for heavy-duty work trucks specializing in snow and ice control and Keeping Americas Roads Safe! Day Shift Hours! Monday Friday: 6:00AM to 4:30PM HOW YOU WILL CONTRIBUTE: As an Installation Technician in our heavy bay, you will have a variety of responsibilities including MIG welding, fabrication, and some assembly work in the up-fit and installation of equipment on heavy-duty work truck builds. The role also involves diagnostic and repair work. You will need to read schematics, diagrams, blueprints, perform shop math, experience in MIG Welding, and ensure accurate installations and repairs. Knowledge of wiring and electrical systems and/or hydraulics is a plus. WHAT WE OFFER YOU: * Paid Time Off: Start accruing PTO with your very first paycheck. * Holiday Pay: Enjoy 11 paid holidays each yearno waiting period! * Quarterly Retention Incentive Bonus: Earn $1 for every regular hour and $1.50 for every overtime hour worked, paid out quarterly. * Extra Paid Time Off: Get rewarded with additional PTO for excellent attendance. * Comprehensive Benefits Package: Includes Medical, Dental, Life, Disability, and more. * 401(k) Retirement Plan: Generous company match with immediate vesting. * Annual Fitness Reimbursement: Receive up to $250 each year to support your wellness goals. * Safety Gear Reimbursement: Get reimbursed for safety shoes and safety glasses. * Professional Development: Access tons of opportunities to grow your skills and advance your career. * And Much More! Discover even more perks when you join our team. WHAT THIS ROLE NEEDS (preferred): * Basic shop math & ability to interpret work instructions, diagrams & blueprints * Hand dexterity and working knowledge of hand tools * Must be willing to work in a team environment * Previous experience in manufacturing setting * Familiarity with weld, assembly processes * Technical degree helpful and/or specialty certifications (i.e., welding, electrical, hydraulics), not required WORKING CONDITIONS: * Ability to lift/push up to 50 lbs. * Bending, lifting, and standing * Exposure to noise and weld and grinding smoke at times Our focus on integrity, teamwork, and high performance creates an ideal work environment for every one of our employees. Discover our opportunities and come see all the ways you can do more at Douglas Dynamics. As an Equal Opportunity Employer, Douglas Dynamics, LLC does not discriminate against qualified applicants in hiring based on race, color, sex, age, sexual orientation, gender identity, national origin, disability or any other characteristic protected by law.

Job Description Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. **Travel is Required for this position 75% of the time** Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Powered by JazzHR sM65VnVpr0

Full-time Description Come join the best heating service company in the NYC area! Controlled Combustion maintains one of the largest and most qualified licensed heating specialist staffs in the industry. Our service personnel, numbering more than 40 people, are members of the Metal Trades Branch-Local 638-A.F.L-C.I.O. That means they are highly qualified, highly competent professionals. In addition, they receive rigorous in-house training as well as ongoing instruction from factory authorized experts and educational institution to keep their technical knowledge current and their maintenance skills sharp. Our shop has earned the prestigious National Board Repair "R" Certificate of Authorization and Symbol Stamp and "U" Certificate of Authorization and Symbol Stamp attesting to our service expertise. Also, our technicians are certified ASME code welders. We maintain a Class "A" installers license in New York City and are licensed throughout the metropolitan area as well. Benefits: 401(k) Dental insurance Health insurance Paid time off Retirement plan Vision insurance Schedule: Monday to Friday Overtime Weekends as needed Experience: Installation / Repair of Gas Piping: 1 year (Preferred) Welding: 1 year (Preferred) License/Certification: Driver's License (Preferred) Work Location: In person Requirements This position will require the following skills and traits: Five (5) years experience under a Licensed Master Plumber DOB Full Gas Work Card Cutting, threading, and fitting black malleable steel piping Cutting, soldering, and braising copper piping ProPress fittings Knowledge of natural gas and fuel oil heating systems Knowledge of utility (ConEd and National Grid) procedures is a plus Electrical experience is a plus. Salary Description $25 to $45

We are seeking a skilled and reliable Welder to join our team. In this role, you will be responsible for performing welding repairs and maintenance on heavy equipment, trucks, and related machinery for a site work company. You will handle on-site and in-shop welding tasks, ensuring the safety, efficiency, and operability of our equipment. Benefits: Medical Insurance paid by Esposito Construction for single rate. 401(k) eligibility with company contribution. Dental insurance eligibility. Vision insurance eligibility. Paid time off. Pay: Flexible, experience based Key Responsibilities: Perform welding repairs and fabrication on heavy equipment (excavators, loaders, dozers) and trucks, addressing structural damages, cracks, and wear. Travel to job sites to provide on-site repairs and troubleshooting for equipment breakdowns. Collaborate with mechanics and operators to assess and identify welding needs. Utilize various welding techniques (MIG, TIG, stick welding, etc.) to repair or fabricate parts and components. Operate tools such as torches, grinders, and plasma cutters to cut and prepare metal. Inspect welds to ensure they meet safety and quality standards. Maintain welding equipment and ensure compliance with safety protocols. Read and interpret blueprints, schematics, and technical drawings to perform repairs. Assist in preventive maintenance tasks to minimize equipment downtime. Qualifications: High school diploma or GED required; technical certification in welding preferred. Proven experience as a welder, preferably working with heavy equipment and trucks. Proficiency in MIG, TIG, and stick welding, with knowledge of various metals (steel, aluminum, etc.). Ability to read and interpret technical drawings and schematics. Strong problem-solving skills and attention to detail. Willingness to travel to job sites and work in varying weather conditions. Valid driver's license required; CDL preferred but not required. Ability to lift heavy materials and work in physically demanding environments. Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

As a Welder, you will be responsible for welding the structural framework on the exterior of a building in Manhattan. This role involves working with structural steel and framework, utilizing various welding techniques to ensure a strong and stable construction. $35-$50/hr depending on experience **Responsibilities** + Perform welding on structural frameworks of high-rise buildings. + Utilize flux core, TIG, and MIG welding techniques. + Execute vertical and structural welds on building exteriors. + Ensure all welding work meets safety and quality standards. **Essential Skills** + Proficiency in flux core, TIG, and MIG welding. + Experience in welding structural steel and frameworks. + OSHA 30 certification. + Site Safety Training (SST) certification. **Additional Skills & Qualifications** + Experience working on high-rise building exteriors is advantageous. **Why Work Here?** Join a team that offers multiple job opportunities lasting 1-2 years, with the potential to transition to a permanent position. Benefit from a stable work environment with opportunities for career growth. **APPLY NOW!** **Job Type & Location** This is a Contract position based out of New York, NY. **Pay and Benefits** The pay range for this position is $35.00 - $50.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in New York,NY. **Application Deadline** This position is anticipated to close on Jan 21, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We are seeking a part-time Welding Instructor who will work alongside the senior instructor, communicate well with other Instructors, and follow the curriculum and provide assistance to students receiving instruction in the Welding Lab. The (PT) welding Instructor will work under the guidance of the Industry and Trades Coordinator. Available hours Mon & Tuesday 8:30 am-2:30pm. Possibly more in fall. This is a part-time, hourly position. EXAMPLE OF DUTIES: * Prep, weld, and visually inspect welds on all materials and processes. * Weld, fabricate and cut, all materials, including mild, stainless, and aluminum. * Guide student learning both in the classroom and welding lab. * Facilitate workshop sessions as needed. * Perform other duties as assigned. Qualifications: * Current welding certification/completion from (AWS), Trade School, 900 hour or equivalent welder/fabricator course or 15 years documented experience. * Candidate must possess knowledge of welding theory, welding code requirements, and certification mandates. * Strong fundamentals and respects, follows and enforces safety protocols. * Ability to work with students of diverse abilities and backgrounds in various learning settings. * Be able to pass a multi process welding and cutting Evaluation. * 5 years of experience in fabrication, fitting, iron work, welding, cnc, pipe, and related metal working industries civilian and military. * Bend test, osha, torch and fire watch certifications, or DOT Certifications ARE required. Do not apply if you don't have a min of 3G in @ least 2 Processes. * Comfortable demonstrating and instructing SMAW, GMAW, FCAW, GTAW, Plasma, Oxy-fuel in all positions. Compensation: The hourly pay for this position is $28. Benefits: * New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.) * Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance. * Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses. * NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)

Job DescriptionDescription: Come join the best heating service company in the NYC area! Controlled Combustion maintains one of the largest and most qualified licensed heating specialist staffs in the industry. Our service personnel, numbering more than 40 people, are members of the Metal Trades Branch-Local 638-A.F.L-C.I.O. That means they are highly qualified, highly competent professionals. In addition, they receive rigorous in-house training as well as ongoing instruction from factory authorized experts and educational institution to keep their technical knowledge current and their maintenance skills sharp. Our shop has earned the prestigious National Board Repair "R" Certificate of Authorization and Symbol Stamp and "U" Certificate of Authorization and Symbol Stamp attesting to our service expertise. Also, our technicians are certified ASME code welders. We maintain a Class "A" installers license in New York City and are licensed throughout the metropolitan area as well. Benefits: 401(k) Dental insurance Health insurance Paid time off Retirement plan Vision insurance Schedule: Monday to Friday Overtime Weekends as needed Experience: Installation / Repair of Gas Piping: 1 year (Preferred) Welding: 1 year (Preferred) License/Certification: Driver's License (Preferred) Work Location: In person Requirements: This position will require the following skills and traits: Five (5) years experience under a Licensed Master Plumber DOB Full Gas Work Card Cutting, threading, and fitting black malleable steel piping Cutting, soldering, and braising copper piping ProPress fittings Knowledge of natural gas and fuel oil heating systems Knowledge of utility (ConEd and National Grid) procedures is a plus Electrical experience is a plus.