Welder jobs in Ramona, CA - 137 jobs

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

PENDING CONTRACT AWARD Job Title: Aerospace Structural Welder Task Description: AEROSPACE STRUCTURAL WELDER, BLS 51-4121, SCA 23010 Function: Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Required experience: Minimum of five (5) years' experience in the field of DOD military aviation maintenance in the last ten (10) years. Of the five (5) years, the Contractor shall have a minimum of three (3) years' experience of aeronautical welding in an aviation maintenance environment. Must have demonstrated knowledge, experience, and working level skills/ability in area of aviation and aerospace welding, and structures sheet metal and fabrication. Must follow Military Specifications 1595 in the following materials: Steel, Stainless Steel, and Aluminum. Required education: High school diploma or General Education Degree (GED) Graduate of a school equivalent to Navy A and/or C school or Certificate of Welding. **Where there are conflicts between Department of Labor 23010 category description and the NAVAIR Manual NA 01-1A-34, the NA 01-1A-34 takes precedence. Compensation $44.12/hour Other Compensation Employees will receive a health and welfare fringe benefit of $7.75 for every hour paid up to 80 hours per pay period. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue bi-weekly from the first week of service 5.54 hours of PTO. KAI employees at NAS North Island/Naval Base Coronado, CA will have 11 paid holidays. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

Labor One is currently hiring Aluminum Structural Welders in San Diego, CA at a Shipyard. Pay rate is up to $25 + $160 perdiem, if eligible. Job Requirements: Three years of experience in Aluminum welding and flux core arc welding processes. Proficient in flat, vertical, overhead, and horizontal. Ceramic Tape experience is required. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

Job Description TIG Welder HOW TO APPLY - Go to **************************** and, fill out the application form on the bottom of the page. Basile Studio is seeking a skilled TIG welder to join our furniture design and fabrication shop located in East Village, San Diego. We create custom furniture and interiors for restaurants, hotels, and high end residential. This is a unique opportunity to work directly with designers and engineers especially early on in the design process. Main Duties Read and interpret shop drawings and specifications ensure material compatibility with project requirements utilize tig welding techniques to create precise and aesthetically pleasing welds apply finishing techniques (grinding, polishing, etc) Work with designers, engineers, and fabrication manager to understand and problem solve new projects. Attend model review and kick off meetings with Engineers. Create solutions that could help a project item be more successful and eliminate waste. Full buy off on project assembly to assure there is no rework and fitting within budget. Identify early on if the estimated allocated time is in danger of not being met. Provide solutions to improve efficiency. Ensure all projects are built off verified field dimensions. Layout Projects: Collect all and ship check all parts and components purchased. Create a fabrication succession list that is coordinated with other departments. Coordinate with tool manager for consumables and tools needed. Analyze and discuss (if needed) the process requirements for fabrication, loading, shipping, and installing project items in parts and/or whole. Determine what equipment/tools are required for on-site installation. Determine power requirements for special equipment Coordinate with support team members or anyone else that is involved in the success of your project. Assure parts from other departments match your plans and dimensions. Delegate and check in regularly with support team members, if provided, to ensure they are performing tasks correctly. Daily operations may also involve: Cleaning the shop Assembling components Product protection at completion Load, pick up, and deliver materials and finished product. Installation on site (local and non-local) REQUIREMENTS: 3 plus years of proven professional working experience in a welding position commitment to safety protocols and guidelines in a workshop environment Valid Driver's license required BENEFITS: Full time Holiday pay health, dental, and 401k $24-35 per hour based on experience HOW TO APPLY - Go to **************************** and, fill out the application form on the bottom of the page.

Job DescriptionBenefits: 401(k) 401(k) matching Opportunity for advancement Training & development Support other personnel as required, including (but not limited to): cutting, grinding, cleaning, tacking, etc. Lifting 50lb. General power tool knowledge (angle grinders, drills, band saw, cold saw). Welding (MIG 0.035, Flux Core, Dual Shield 0.045). Loading and unloading trucks. Basic knowledge on how to read a measuring tape. 8-hour shift Monday to Friday. Material stock check (shipping & receiving). Steel profiles & processes knowledge. Forklift certification preferred. Operating overhead crane & rigging. Handles paperwork accurately and acquires all signatures per process. Education Minimum education requirement: High School diploma or equivalent. Must have a basic understanding of standard power tools and possess the ability to read / follow simple instructions. Lift heavy objects up to 50 pounds. Work in confined spaces Experience in structural steel environment (preferred). Depending on experience, you earn $20.00 - $22.00/hour.

Responsive recruiter Benefits: 401(k) 401(k) matching Opportunity for advancement Training & development Support other personnel as required, including (but not limited to): cutting, grinding, cleaning, tacking, etc. Lifting 50lb. General power tool knowledge (angle grinders, drills, band saw, cold saw). Welding (MIG 0.035, Flux Core, Dual Shield 0.045). Loading and unloading trucks. Basic knowledge on how to read a measuring tape. 8-hour shift Monday to Friday. Material stock check (shipping & receiving). Steel profiles & processes knowledge. Forklift certification preferred. Operating overhead crane & rigging. Handles paperwork accurately and acquires all signatures per process. Education Minimum education requirement: High School diploma or equivalent. Must have a basic understanding of standard power tools and possess the ability to read / follow simple instructions. Lift heavy objects up to 50 pounds. Work in confined spaces Experience in structural steel environment (preferred). Depending on experience, you earn $20.00 - $22.00/hour. Compensation: $20.00 - $22.00 per hour About Us PCIW Steel Corp is a top quality structural steel company with local people working on projects throughout California. Our employees bring a true passion to the job. A passion that drives the company. It makes us reach higher and be a better source for our customers. With more than 54 years of combined experience in the industry and hundreds of projects under our belt delivering structural steel that include decking, joists, stairs, and other miscellaneous metals. Using our highly skilled team you will receive outstanding workmanship and unparalleled service dedicated to every project's success and safety. We commit to provide excellence and value to all that we do. Our dedicated approach delivers exceptional quality, predictable outcomes, continuous growth, opportunities, and mutually beneficial relationships. We have built our reputation on providing quality service through trust and relationships, while offering all aspects of steel services to fit a diversity of project types and needs. OUR MISSION We are a highly experienced, relationship-driven company that values strong work ethic honoring commitments and providing a high quality product at a competitive price. Satisfied customers are our top priority. “Do it right the first time”. OUR VISION To become your best choice in a steel construction company. We aim to go above and beyond to satisfy our clients. At PCIW Steel we are family.

CTR Group is seeking several Pipe Welder's local to the San Diego, CA area. Immediate openings and urgently hiring! What We Offer: Weekly Pay - you receive a paycheck every week Comprehensive Benefits Package Safety First! RESPONSIBILITIES: (may include but are not limited to) Read and interpret basic drawings and weld symbols Pass weld test for all Company weld procedures in the 6GR position Pass Company TIG weld test procedure for Carbon Steel, SS and CUNI pipe Work to Company housekeeping procedure Inspection of work, identification of potential problems, initiation of corrective actions Increase awareness of Quality procedures within department Perform as a productive working team member that meets daily goals set by the supervisor Continuously improve communications and flexibility within the team Help build the team environment Build pride of workmanship and quality through on job training Contribute towards innovation / productivity improvements Assist in the control of waste elimination, e.g. materials, consumables etc Assist supervisor to maintain control of department equipment and its maintenance Must have full set of personal tools Work towards the team goal of delivering the vessel on time Always be ready to start shift on time Follow Company guidelines and procedures Do not leave job early or return late from break times Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage REQUIREMENTS: (may include but are not limited to) Must be able to TIG Carbon, Stainless steel, and Copper Nickle Pipe Ability to pass “A Class” skills validation test to demonstrate welding ability for restricted open root welds Ability to successfully complete onboarding procedures in preparation to pass 6GR weld qualification test requirements for copper nickel, carbon steel and stainless steel to meet contract requirements for A Class welding on the vessel Must have the ability to bend, squat, stoop, crawl, and kneel Perform prolonged standing Ability to turn head from side to side and about the vertical axis Lift/push/pull 50lbs on an occasional basis Lift/push/pull up to 20lbs on a frequent basis Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps) Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts Able to work at a variety of levels (ex. waist, eye, overhead) Demonstrate the ability to safely and appropriately use required tools and equipment Demonstrate good balance while working on uneven surfaces and maneuvering obstacles Possess sufficient handgrip and coordination to carry and operate tools and equipment Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards Ability to withstand cold and hot temperatures Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time within OSHA guidelines Able to respond to verbal and audible sounds/commands Able to utilize adequate visual skills Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job Must be able to tour all vessels and work sites While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear The employee is occasionally required to sit Candidates must meet the following employment eligibility guidelines to be considered for employment: 18 years of age or older at time of application Able to provide proof of US Person Status Willing to submit to a drug screen Willing to submit to a background check Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks About CTR Group: CTR Group operates in the staffing and recruitment industry, Nationwide for over 35 years. We provide full-service staffing support for various sectors including Marine Trades, Heavy Industrial, Light Industrial, Commercial, Technical, Professional, Aerospace and Aviation, and Energy. We offer a range of placement options such as Direct Hire, Contract Labor, Temporary & Temp to Hire. CTR Group takes pride in its high ratings across various platforms, reflecting our commitment to excellence and our dedication to providing quality staffing and employment services. CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified.

POSSIBLE TRAVEL TO WISCONSIN WITH PER DIEM SUMMARY/OBJECTIVE The Pipe Welder JM3 assist pipefitter with fit-up of piping systems, accomplish welding piping onboard ship and shop fabrication for P-1 piping including working off and entering data into PCP's. Welding need to pass all NDT's including hydrostatic testing. For production of Navy ship repair and other marine and commercial equipment. Pipe Welder JM2 must possess trade specific tools. ESSENTIAL FUNCTIONS / DUTIES Setup welding equipment All welding must pass NDT's Certification to weld all piping materials and systems Fit and Tack parts together in preparation for welding Perform precise fitting work on components Running lines and leads Blueprint reading and interpret weld symbols Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. Ensure that employees assigned with Firewatch duties are in place and ready prior to begin hot work Fill out Job JSA forms Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. PHYSICAL DEMANDS The Pipe Welder JM3 must be able to meet and successfully perform the essential functions of this job. The following physical demands are representative to the position. The position is active and requires extensive standing, walking, sitting, bending, kneeling, stooping, crawling, climbing, and crouching. Along with such movements, employee is required to lift parts/machinery of up to 75 pounds. Additional demands are listed below: Able to climb ladders and work off scaffolding Able to lift, carry, and or push up to 50 - 75 lbs. throughout the shift (including overtime) * Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions KNOWLEDGE / SKILLS Must be certified in Pipe Welding Ability to weld in all positions Ability to troubleshoot minor welding equipment problems Must be able to evaluate the use of various resources and make knowledgeable decisions regarding safety and company procedures and policies Able to read a tape measure Pass Welder Workmanship Training (WWT) Able to operate sawzall, 4” & 7” grinders, and various other tools Able to use Weld Gauges COMPETENCIES Communication Proficiency Flexibility (Job duties & schedule) Work well with others in all areas where SCW&M is performing work Follow verbal/written instructions Teamwork orientation SUPERVISORY RESPONSIBILTY Pipe Welder JM3 position has no supervisory responsibilities. POSITION TYPE / HOURS OF WORK This is a full-time position, 40 hours per week. Schedule is Monday- Friday, 6:00 a.m. to 2:30 p.m. / 2:30 p.m. to 11:00 p.m. (swing shifts dependent on work load). Occasional overtime and weekend work may be required based on production needs. REQUIRED EDUCATION AND EXPERIENCE Must be certified Pipe Welder Must have a minimum of 1-2 years of ship repair experience and/or skill set. Must be able to speak and understand Basic English Work Authorization Clearance For E-verify and contract security purposes (including ship access lists), all employees MUST present a valid export document. Acceptable documents are U.S. Birth Certificate, Certificate of Naturalization, Passport, Passport Card and Permanent Resident Card. Other Please consider that duties, responsibilities, and all other points specified in this description can change at any time with or without notice. Safety and responsible work practices are of SCW&M importance in everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success!

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has multiple positions open for Welder Journeyman, with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation Job Summary / Welder Journeyman: Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision. Basic knowledge of fittings preferred. Performs other related tasks as assigned. Job Requirements and Experience: Must be 18 years of age or older to apply. Minimum 5 years of marine and/or shipyard experience preferred. Benefits: Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) Paid Time Off Company paid holidays Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) Career development opportunities This position may require access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport. Welder Journeyman EEO/AA/Vet/Disabled #zr

OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has multiple positions open for Welder Journeyman , with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation Job Summary / Welder Journeyman: Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision. Basic knowledge of fittings preferred. Performs other related tasks as assigned. Job Requirements and Experience: Must be 18 years of age or older to apply. Minimum 5 years of marine and/or shipyard experience preferred. Benefits : Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) Paid Time Off Company paid holidays Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) Career development opportunities This position may require access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport. Welder Journeyman EEO/AA/Vet/Disabled #zr

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR enn RGX4KXh

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

POSSIBLE TRAVEL TO WISCONSIN WITH PER DIEM JOB DESCRIPTION SUMMARY/OBJECTIVE The Pipe Welder JM1 Welds pipe components , hangers and assist targeting of piping for production of Navy ship repair and other marine and commercial equipment. Pipe Welder JM1 must possess trade specific tools. ESSENTIAL FUNCTIONS / DUTIES Setup welding equipment Fit and Tack parts together in preparation for welding Certify for basic steel Perform precise fitting work on components Running lines and leads Blueprint reading and interpret weld symbols Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. Ensure that employees assigned with Firewatch duties are in place and ready prior to begin hot work Fill out Job JSA forms Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. PHYSICAL DEMANDS The Pipe Welder JM1 must be able to meet and successfully perform the essential functions of this job. The following physical demands are representative to the position. The position is active and requires extensive standing, walking, sitting, bending, kneeling, stooping, crawling, climbing, and crouching. Along with such movements, employee is required to lift parts/machinery of up to 75 pounds. Additional demands are listed below: Able to climb ladders and work off scaffolding Able to lift, carry, and or push up to 50 - 75 lbs. throughout the shift (including overtime) * Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions KNOWLEDGE / SKILLS Must be certified in Pipe Welding Ability to weld in all positions Ability to troubleshoot minor welding equipment problems Must be able to evaluate the use of various resources and make knowledgeable decisions regarding safety and company procedures and policies Able to read a tape measure Pass Welder Workmanship Training (WWT) Able to operate sawzall, 4” & 7” grinders, and various other tools Able to use Weld Gauges COMPETENCIES Communication Proficiency Flexibility (Job duties & schedule) Work well with others in all areas where SCW&M is performing work Follow verbal/written instructions Teamwork orientation SUPERVISORY RESPONSIBILTY Pipe Welder JM1 position has no supervisory responsibilities. POSITION TYPE / HOURS OF WORK This is a full-time position, 40 hours per week. Schedule is Monday- Friday, 6:00 a.m. to 2:30 p.m. / 2:30 p.m. to 11:00 p.m. (swing shifts dependent on work load). Occasional overtime and weekend work may be required based on production needs. REQUIRED EDUCATION AND EXPERIENCE Must be certified Pipe Welder Must have a minimum of 1-2 years of ship repair experience and/or skill set. Must be able to speak and understand Basic English Work Authorization Clearance For E-verify and contract security purposes (including ship access lists), all employees MUST present a valid export document. Acceptable documents are U.S. Birth Certificate, Certificate of Naturalization, Passport, Passport Card and Permanent Resident Card. Other Please consider that duties, responsibilities, and all other points specified in this description can change at any time with or without notice.

Job DescriptionLabor One is hiring Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631 (619)657-5507 or (858)717-1672 *Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Summary Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards Three years experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must pass shipyards plate test in all positions and pipe test on 6G restricted fix position using FCAW and GTAW processes. Must be certified to operate high reaching equipment. Must have ability to work at heights, in confined spaces, and be available to work any shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Essential Job Tasks - Set up tools, welding equipment and supplies at job site - Burns pipe or penetrations. - Tacks and welds pipe. - Cleans weld area; sweeps and removes scrap. - Other job duties as may be assigned relevant to the trade. Materials, Tools Equipment, Work Aids Welding leads, welding machinery, ventilation hose, tool bag, ladder, grinders, mini grid, burning leads, cutting torches, chipping hammers, welding stingers, and personal protective equipment. Physical/Mental Involvement Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. Marginal Job Tasks General housekeeping in work areas. May be required to attend safety, quality and/or process improvement meetings. Environmental Factors Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has multiple positions open for Welder Journeyman , with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation Job Summary / Welder Journeyman: Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision. Basic knowledge of fittings preferred. Performs other related tasks as assigned. Job Requirements and Experience: Must be 18 years of age or older to apply. Minimum 5 years of marine and/or shipyard experience preferred. Benefits : Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) Paid Time Off Company paid holidays Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) Career development opportunities This position may require access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport. Welder Journeyman EEO/AA/Vet/Disabled #zr

Labor One is hiring Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631 (619)657-5507 or (858)717-1672 *Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Summary Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards Three years experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must pass shipyards plate test in all positions and pipe test on 6G restricted fix position using FCAW and GTAW processes. Must be certified to operate high reaching equipment. Must have ability to work at heights, in confined spaces, and be available to work any shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Essential Job Tasks - Set up tools, welding equipment and supplies at job site - Burns pipe or penetrations. - Tacks and welds pipe. - Cleans weld area; sweeps and removes scrap. - Other job duties as may be assigned relevant to the trade. Materials, Tools Equipment, Work Aids Welding leads, welding machinery, ventilation hose, tool bag, ladder, grinders, mini grid, burning leads, cutting torches, chipping hammers, welding stingers, and personal protective equipment. Physical/Mental Involvement Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. Marginal Job Tasks General housekeeping in work areas. May be required to attend safety, quality and/or process improvement meetings. Environmental Factors Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

POSSIBLE TRAVEL TO WISCONSIN WITH PER DIEM SUMMARY/OBJECTIVE The Pipe Welder JM2 assist pipefitter with fit-up of piping systems, accomplish welding piping onboard ship and shop fabrication for P- 2 piping. Welding need to pass all NDT's including hydrostatic testing. For production of Navy ship repair and other marine and commercial equipment. Pipe Welder JM2 must possess trade specific tools. ESSENTIAL FUNCTIONS / DUTIES Setup welding equipment Certified for all P-2 piping All welding must pass ndt's Fit and Tack parts together in preparation for welding Perform precise fitting work on components Running lines and leads Blueprint reading and interpret weld symbols Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. Ensure that employees assigned with Firewatch duties are in place and ready prior to begin hot work Fill out Job JSA forms Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. PHYSICAL DEMANDS The Pipe Welder JM2 must be able to meet and successfully perform the essential functions of this job. The following physical demands are representative to the position. The position is active and requires extensive standing, walking, sitting, bending, kneeling, stooping, crawling, climbing, and crouching. Along with such movements, employee is required to lift parts/machinery of up to 75 pounds. Additional demands are listed below: Able to climb ladders and work off scaffolding Able to lift, carry, and or push up to 50 - 75 lbs. throughout the shift (including overtime) * Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions KNOWLEDGE / SKILLS Must be certified in Pipe Welding Ability to weld in all positions Ability to troubleshoot minor welding equipment problems Must be able to evaluate the use of various resources and make knowledgeable decisions regarding safety and company procedures and policies Able to read a tape measure Pass Welder Workmanship Training (WWT) Able to operate sawzall, 4” & 7” grinders, and various other tools Able to use Weld Gauges COMPETENCIES Communication Proficiency Flexibility (Job duties & schedule) Work well with others in all areas where SCW&M is performing work Follow verbal/written instructions Teamwork orientation SUPERVISORY RESPONSIBILTY Pipe Welder JM2 position has no supervisory responsibilities. POSITION TYPE / HOURS OF WORK This is a full-time position, 40 hours per week. Schedule is Monday- Friday, 6:00 a.m. to 2:30 p.m. / 2:30 p.m. to 11:00 p.m. (swing shifts dependent on work load). Occasional overtime and weekend work may be required based on production needs. REQUIRED EDUCATION AND EXPERIENCE Must be certified Pipe Welder Must have a minimum of 1-2 years of ship repair experience and/or skill set. Must be able to speak and understand Basic English Work Authorization Clearance For E-verify and contract security purposes (including ship access lists), all employees MUST present a valid export document. Acceptable documents are U.S. Birth Certificate, Certificate of Naturalization, Passport, Passport Card and Permanent Resident Card. Other Please consider that duties, responsibilities, and all other points specified in this description can change at any time with or without notice. Safety and responsible work practices are of SCW&M importance in everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success!

Job DescriptionOUR CORE PILLARS: Safety | Operational Excellence | Shareholder ValuePropulsion Controls Engineering has multiple positions open for Welder Journeyman, with a minimum of five years marine and/or shipyard experience; supporting our San Diego, California location. PCE is a full service electro-mechanical repair and diesel repair contractor. PCE has garnered a wealth of extensive experience in successfully executing major system overhauls across numerous ports throughout the world on virtually every class of ship currently in operation Job Summary / Welder Journeyman: Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE and the ability to determine proper weld joint design without Supervision. Basic knowledge of fittings preferred. Performs other related tasks as assigned. Job Requirements and Experience: Must be 18 years of age or older to apply. Minimum 5 years of marine and/or shipyard experience preferred. Benefits: Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity) Paid Time Off Company paid holidays Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan) Career development opportunities This position may require access to U.S. government or military sites. As such, candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification. Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport. Welder Journeyman EEO/AA/Vet/Disabled #zr