Welder jobs in Riverside, CA

Job Description Together We Build - Partnership, Innovation, Excellence, and Safety At Kelso Industries, 3,500+ employees across 30 companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. WHO WE ARE Retrofit Technology is part of the Kelso Industries family of companies, a rapidly growing group of mechanical, electrical, and plumbing (MEP+) contractors committed to excellence in safety, quality, customer success, and craftsmanship. Based in Bloomington, California, Retrofit Technology specializes in all aspects of commercial HVAC systems, including installation, maintenance, and service. Our team is equipped to handle projects from start to finish with precision and care. Backed by certified welders, electricians, and service technicians, we have the expertise to tackle even the most challenging HVAC retrofit and mechanical projects-delivering exceptional results every time. ABOUT THE ROLE We are seeking an experienced Pipe Welder to join our growing team and support mechanical and HVAC retrofit projects across Southern California. This position is based out of Bloomington, CA and requires frequent travel to job sites throughout the region. A daily per diem is provided and hotel accommodations are covered by the company when overnight stays are necessary. The Pipe Welder will be responsible for fabricating, assembling, and installing piping systems for commercial and industrial HVAC applications. The ideal candidate has hands-on experience with multiple welding methods and piping materials, values safety and quality, and can work both independently and as part of a field crew. RESPONSIBILITIES Weld and assemble piping systems using various methods (TIG, MIG, stick, brazing, soldering, etc.). Fit, align, and secure pipe systems and supports according to specifications and drawings. Read and interpret blueprints, schematics, and technical drawings. Fabricate and install copper, carbon steel, stainless steel, and PVC piping. Perform rigging, demo, and installation work on HVAC retrofit projects. Inspect completed welds to ensure compliance with codes and safety standards. Collaborate with project managers, foremen, and other trades to complete projects efficiently. Maintain a clean, safe, and organized work area in compliance with OSHA and company policies. QUALIFICATIONS High school diploma or GED equivalent. 3+ years of experience in pipe welding or mechanical retrofit environments. Proficiency in one or more of the following: Soldering or brazing copper pipe Welding carbon or stainless steel pipe Fitting or threading steel and PVC pipe Ability to pass a pipe welding test (administered at our Bloomington shop). Skilled at reading and following mechanical drawings and specifications. Valid driver's license and willingness to travel throughout Southern California. Strong attention to detail, reliability, and safety mindset. COMPENSATION & BENEFITS Hourly wage: $30 - $50 per hour (based on experience and certification) Per diem and hotel accommodations provided for overnight travel Paid travel time to and from job sites Comprehensive benefits package: Medical and dental (50% employer paid) 401(k) with up to 4% company match Eligibility after 30 days of employment Paid Time Off (PTO) and company holidays Opportunities for long-term growth within the Kelso Industries family JOIN OUR TEAM If you're a skilled welder who takes pride in craftsmanship and enjoys working on complex HVAC retrofit projects, we'd love to hear from you. Apply today to join a team that values safety, integrity, and excellence in every project. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from our lowest geographic market up to our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered and forms of compensation that may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. California Pay Range$30-$40 USD Why Join Kelso Industries? Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job Details Experienced Santa Ana, CA Full Time High School $30.00 - $40.00 Hourly Any ManufacturingDescription The Welder/Fabrication position requires skillful, efficient, quality custom fabrication within demanding scheduled time periods. The candidate must have strong communication & problem-solving skills, be able to read & interpret printed CAD Drawings and be able to accurately measure, cut and detail materials. The candidate must be effective with time management and work area organizational skills. POSITION DUTIES/RESPONSIBILITES Proficient in various weld processes, GMAW, GTAW. Experience welding various materials: Steel, Stainless Steel, Aluminum, Titanium. Ability to read, understand, and work with engineering drawings. Perform simple mathematics, be familiar with fractional and decimal measurements and effectively use and understand measuring devices. Be adept at performing Quality Control on finished products, ensuring that they meet specified performance standards and tolerances. Be detail oriented and have the ability to fabricate quality parts/ structures within specified dimensional tolerances. Ability to work in a fast-paced environment, multitask, and pivot between different projects as necessary. Ability to work well with others and be a team player. Be self-motivated, self-starting, and able to meet deadlines with minimal supervision. Flexible schedule, ability to work overtime as necessary. Qualifications Education: High school diploma or equivalent or technical school. American Welding Society (AWS) certification Experience: At least 5 years of metal fabrication experience Experience in manufacturing Knowledge of aerospace processes Skills and Abilities: Excellent communication skills. Excellent interpersonal skills. Excellent organizational skills and attention to detail. Excellent time management skills with a proven ability to meet deadlines. Ability to function well in a high-paced and at times stressful environment.

Job Description Company Background: We are 24 (and growing) market-leading operating companies that deliver unmatched HVAC, mechanical, refrigeration, plumbing, and electrical solutions. We are actively building the nation's preferred technical service partnership for commercial MEP+ ecosystems, empowering industrial, commercial, and institutional clients-including Fortune 500 companies and other industry leaders across the United States-with reliable, innovative service. Learn more about us at ************************ WHO WE ARE Retrofit Technology is part of the Kelso Industries family of companies, a rapidly growing group of mechanical, electrical, and plumbing (MEP+) contractors committed to excellence in safety, quality, customer success, and craftsmanship. Based in Bloomington, California, Retrofit Technology specializes in all aspects of commercial HVAC systems, including installation, maintenance, and service. Our team is equipped to handle projects from start to finish with precision and care. Backed by certified welders, electricians, and service technicians, we have the expertise to tackle even the most challenging HVAC retrofit and mechanical projects-delivering exceptional results every time. ABOUT THE ROLE We are seeking an experienced Pipe Welder to join our growing team and support mechanical and HVAC retrofit projects across Southern California. This position is based out of Bloomington, CA and requires frequent travel to job sites throughout the region. A daily per diem is provided and hotel accommodations are covered by the company when overnight stays are necessary. The Pipe Welder will be responsible for fabricating, assembling, and installing piping systems for commercial and industrial HVAC applications. The ideal candidate has hands-on experience with multiple welding methods and piping materials, values safety and quality, and can work both independently and as part of a field crew. RESPONSIBILITIES Weld and assemble piping systems using various methods (TIG, MIG, stick, brazing, soldering, etc.). Fit, align, and secure pipe systems and supports according to specifications and drawings. Read and interpret blueprints, schematics, and technical drawings. Fabricate and install copper, carbon steel, stainless steel, and PVC piping. Perform rigging, demo, and installation work on HVAC retrofit projects. Inspect completed welds to ensure compliance with codes and safety standards. Collaborate with project managers, foremen, and other trades to complete projects efficiently. Maintain a clean, safe, and organized work area in compliance with OSHA and company policies. QUALIFICATIONS High school diploma or GED equivalent. 3+ years of experience in pipe welding or mechanical retrofit environments. Proficiency in one or more of the following: Soldering or brazing copper pipe Welding carbon or stainless steel pipe Fitting or threading steel and PVC pipe Ability to pass a pipe welding test (administered at our Bloomington shop). Skilled at reading and following mechanical drawings and specifications. Valid driver's license and willingness to travel throughout Southern California. Strong attention to detail, reliability, and safety mindset. COMPENSATION & BENEFITS Hourly wage: $30 - $50 per hour (based on experience and certification) Per diem and hotel accommodations provided for overnight travel Paid travel time to and from job sites Comprehensive benefits package: Medical and dental (50% employer paid) 401(k) with up to 4% company match Eligibility after 30 days of employment Paid Time Off (PTO) and company holidays Opportunities for long-term growth within the Kelso Industries family JOIN OUR TEAM If you're a skilled welder who takes pride in craftsmanship and enjoys working on complex HVAC retrofit projects, we'd love to hear from you. Apply today to join a team that values safety, integrity, and excellence in every project. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from our lowest geographic market up to our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered and forms of compensation that may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. California Pay Range$30-$40 USD Why Join Us? We're committed to attracting talented individuals who seek a company with a strong foundation of success and an outstanding culture. We proactively provide competitive compensation, comprehensive benefits, and clear pathways for career advancement with autonomy and flexibility in an entrepreneurial environment. Learn more about us at ************************ We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment on the basis of race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business.

Job DescriptionBenefits: 401(k) 401(k) matching Health insurance Opportunity for advancement Paid time off Pay & Schedule Pay: $23 $28/hr (DOE) Shift: 1st shift 6:00 AM to 2:30 PM Status: Full-Time Days: Monday Friday Availability: Must be willing to work overtime and weekends when required. About Us Paradigm Ironworks is a Riverside-based structural steel fabrication shop specializing in high-quality stairs, rails, gates, and architectural steel for commercial, industrial, and public works projects. We are known for precision craftsmanship, on-time delivery, and a strong safety culture. Key Responsibilities Maintain a safe and organized work environment in compliance with OSHA and company standards. Fit, weld, and fabricate structural steel stairs, rails, and related components to precise specifications. Work directly from detailed shop drawings and welding symbols. Perform accurate layout, cutting, and preparation of steel components prior to assembly. MIG weld using 71M steel wire for high-strength connections. Collaborate with other welders and shop staff to meet production deadlines without sacrificing quality. Ensure final products meet AWS quality standards and project specifications. Requirements Minimum 5 years experience as a welder/fitter in structural steel fabrication. AWS Certification required. Proven ability to read and interpret shop drawings and structural details. Strong experience with stairs, rails, and architectural steel fabrication. Proficient with MIG welding (71M wire). Able to lift up to 50 lbs and stand for extended periods. Strong work ethic, attention to detail, and pride in craftsmanship.

Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values * Operates or tends welding machines that join or bond components to fabricate metal products and assemblies according to client and engineering specifications * Reads, interprets and understands production schedule and specifications to plan tasks related to work orders and determine the appropriate welding equipment or method * Establishes components for welding according to specifications * Performs testing and inspection of welded surfaces and structures to discover flaws * Maintains welding equipment to meet safety standards * Completes documentation of welding activities Job Qualifications * High school diploma or equivalent preferred. * Associate's Degree, training in Vocational school, or relevant industry experience required * One (1) year of experience in machine welding and knowledge of orbital and automated welding required. * Ability to pass a standard Code Welder exam required. * Ability to operate GTAW, SMAW and GMAW welding equipment required. * Ability to read engineering specifications preferred. * Ability to work independently with minimal supervision. * Possession of current TWIC card or ability to obtain a TWIC card required. * Travel Requirements: 0% - 25 Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere * Interaction with other crew employees, as well as supervisors and client personnel * Working in plant and/or shop areas around production machinery with extreme noise levels * Must be able to wear safety equipment as required by the safety department for personal protection * May be at more than one job site in a day and must be able to tolerate climate changes * May be required to travel out of town on a periodic basis Physical and Mental Requirements * Ability to lift and carry 75 pounds * Must be able to walk and climb except when performing non-field duties * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells * Ability to maintain focus and multitask effectively * Excellent communication skills Additional Job Description Anticipated compensation for this role is $52,000.00 - $72,800.00 per year plus benefits. Note: Disclosure as required by Cal. Lab. Code § 432.3 of the pay range for this role when being hired into our locations in California. Team reserves the right to pay more or less than the pasted range. Actual compensation will be based on experience, qualifications, and geography.

SUMMARY Combination - Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

This position is responsible for welding accurate, quality parts according to instructions and within specified time frame, using the appropriate tools and/or equipment according to safety and quality standards. Candidate should be able to perform adjustments needed to ensure factory settings and specifications by using schematics, engineering documents and precedent to weld parts and submitting welded parts to quality control or appropriate team leader. ESSENTIAL FUNCTIONS: Fabricate parts as directed by Supervisor Understand and perform weld machine setup Understand and read blueprints Perform accurate, quality fabrication in a timely manner Submit fabricated parts to Quality Control. Maintains tools, equipment, and workspace Complies with Established Policies Clock in and out of work orders. NON-ESSENTIAL FUNCTIONS: Regularly clean tools, equipment, and workspace throughout the shift. Clean and detail tools, equipment, and workspace at the end of every shift. Follow instructions regarding routine maintenance and/or treatment for tools, equipment, and workspace. Complies with established procedures. Manages time and resources by using company resources in order to maximize productivity and accomplish tasks on time. Demonstrate commitment to an Injury-Free Environment by actively participating in company safety programs. Comply with all aspects of the corporate environmental, health and safety program. SKILLS: MIG welding experience is required (3 year minimum). TIG welding experience a plus. Blueprint reading. PAY RATE: $24.00-$29.00 REPORTING RELATIONSHIP: Supervisor MENTAL ABILITIES: Ability to work harmoniously with others Ability to accept and follow instruction Ability to maintain positive attitude LIFTING: Average Weight: 25 lb. Frequency: Daily

Get ready to grow with us! Northwest Pipe Company is the nation's leading manufacturer of water infrastructure products-and with over 50 years of experience, we're just getting started! Our business is growing, and we're looking for great people to grow with us. We're immediately seeking a Welder II-III to join our Northwest Pipe Company team in Adelanto. We Offer: * Medical, Dental, Vision, Life, and AD&D Insurance (1st of month after hire) * Paid Vacation, Holidays, and Sick Time * Weekly Paycheck * 401k Retirement Savings Plan with Employer Match * Bonus Potential * Tuition Reimbursement * Safety Footwear and Eyewear Voucher (day 1 of employment) * Employee Assistance Program * Opportunities for Career Advancement * Values-Driven Culture Committed to Diversity, Inclusion, and Safety Our Values: * Accountability is evident when we do what we say we are going to do and people accept responsibility for their actions. We do not point fingers and blame others. We own our actions. * Commitment is not only promising to do something, but actually investing in the necessary effort and actions to make it happen. * Teamwork is essential for competing in a challenging and constantly changing business environment. Working together across all job functions is critical to achieving our success. SUMMARY OF JOB PURPOSE: The Welder is responsible for performing quality welds while meeting all quality and safety standards. Under ongoing supervision, welds, cleans cuts and grinds. Assists in the departmental housekeeping and safety efforts and works collaboratively with other members of the department and production counterparts to ensure production workflow. ESSENTIAL FUNCTIONS AND MAJOR RESPONSIBILITIES: * Safely and efficiently, use welding equipment such as welding machine, grinder and cutting torch. * Cleans, grinds welds and end finish as required. * Lays out, positions, aligns, and fits components together. * Repair welds to required specifications. * Use of tools for cutting and fitting offset. * Perform x-ray quality welds. * Properly identify (mark) pipe with the use of spray paint and or stamper. * Inspects, cleans and performs basic preventative maintenance on welding tools and equipment. * Identify and report any unsafe working conditions or equipment. * Follows all OSHA safety requirements, work rules and instructions, ISO procedures, job safety analysis (JSAs) and company policies and promotes a safe culture. * Regular, reliable, and predictable attendance is necessary in order to perform the essential functions of this position * Performs other duties as assigned by the lead or supervisor. SECONDARY RESPONSIBILITIES: * Complete and maintain all required paperwork. * May provide support to the fabrication department. * Participates in all inventories, safety meetings and ISO audits. * Maintain housekeeping within all production, storage and waste areas. KNOWLEDGE, SKILLS, ABILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Ability to pass a FCAW - 2G and/or 3G weld test. * Ability to pass a SMAW - 2G, 3G and/or 7018 weld test. * Must be able to maintain a welding certification. * Must be able to operate a welding machine and grinder safely. CERTIFICATES, LICENSES, REGISTRATIONS: * FCAW certified WORK HOURS / SHIFT: * Work hours vary or change based on operational needs. * Must be able to work on Saturdays and overtime as required. EDUCATION / EXPERIENCE: * One year certified welding experience in a heavy manufacturing environment preferred. * Current / valid certification in FCAW 2G and 3G and SMAW 2G, 3G and 7018 preferred. * Two or more years of experience as a certified welder in a pipe manufacturing facility highly preferred. WELDER II - this level of Welder is responsible for performing duties described for a Welder I. This level of welder requires additional training, skills, certification, and experience and must receive the appropriate score on the plant specific Welder Level Card. Work normally is performed under limited to close supervision. As additional experience is gained, the employee may be assigned to tasks that are more difficult in nature and require more responsibility. WELDER III - this level of Welder is responsible for performing duties described for a Welder II. This level of welder possess advanced qualifications, experience, and must receive the appropriate score on the plant specific Welder Level Card. Work normally is performed under minimal supervision. Employees in this position may be responsible for providing on-the-job training to new employees. Northwest Pipe Company is committed to equal employment opportunity. Veterans and individuals with disabilities are encouraged to apply. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Our organization maintains a drug-free workplace. Except where prohibited by state law, offers of employment may be contingent upon the successful completion of a background check, drug test, and/or physical examination, as determined by the essential functions and physical requirements of the position. Northwest Pipe Company reserves the right to close the position, with or without notice, if a qualified candidate is identified prior to the close date. PHYSICAL DEMANDS/WORK ENVIRONMENT: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Project timelines and work volume / deadlines may often require working outside of standard office hours, weekend, or evening work. Regular, reliable and predictable attendance is necessary in order to perform the essential functions of this position. Physical Activity: Up to 2/3 of the time: * Standing: Remaining upright in a stationary position, particularly for sustained periods. * Walking: Moving about to accomplish tasks, particularly for long distances or moving from one work site another. * Pushing: Using upper extremities to press against something with steady force in order to thrust forward downward or outward. * Pulling: Using upper extremities to exert force in order to draw drag haul or tug objects in a sustained motion. * Lifting: Raising object from a lower to a higher position or moving objects horizontally from * Grasping: Applying pressure to an object with the fingers and palm to hammers grinders welding lead. * Repetitive motions: Making substantial movements (motions) of the wrists hands, and /or fingers such as grinding. Less than 1/3 of the time: * Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms. Body agility is emphasized. * Balancing: Maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces. * Stooping: Positions self to checking pipe this factor is important if it occurs to a considerable degree and requires the full use of the lower extremities and back muscles. * Kneeling/Crouching: Position self to checking pipe. * Fingering: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling to holding stud stamps. * Feeling Perceiving attributes of objects such as size shape temperature or texture by touching with skin particularly that of fingertips. * Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately loudly or quickly * Communicating: Expressing or exchanging ideas and information accurately, in written or diagram form. * Hearing: perceiving the nature of sounds at normal speaking levels with or without correct, having the ability to receive detailed information through oral communication, and making fine discriminations in sounds. Physical Requirements: Medium work: Exerting up to 50 pounds of force occasionally and /or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Visual Acuity The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures transcribing viewing a computer terminal extensive reading visual inspection involving small defects small parts and /or operation of machines (including inspection) using measurement devices and /or assembly or fabrication of parts at distances close to the eyes. Vision Requirements: Up to 2/3 of time, the worker is required to have: * The worker is required to have close vision (clear vision at 20 inches or less) * The worker is required to have color vision (ability to identify and distinguish color) * The worker is required to have peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point) * The worker is required to have depth perception (three dimensional vision, ability to judge distances and spatial relationships) Less than 1/3 of the time * The worker is required to have distance vision (clear vison at 20 feet or more) * The worker will not be required to have any special vision. Weather Conditions Over 2/3 of the time: * The worker is subject to vibration: Exposure to oscillating movements to the extremities or whole body. Up to 2/3 of the time: * The worker is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature changes. * The worker is subject to extreme heat: Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions such as wind and humidity. * The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level. * The worker is subjects to hazards: Includes a variety of physical conditions such as proximity to moving mechanical parts moving vehicles electrical current working on scaffolding and high places exposure to high heat or exposure to chemical. * The worker is subject to atmospheric conditions: One or more of the following conditions that affects the respiratory system of the skin: Fumes odors, dusts mists gases or poor ventilation. Less than 1/3 of the time: * The worker is subject to both environment conditions: activities occur inside and outside. * The worker is subject to extreme cold: Temperatures typically below 32 degrees for periods of more than one hour (Consideration should be given to the effect of other environmental conditions such as wind and humidity.) * The worker frequently is in close quarters crawl spaces, shafts manholes small enclosed rooms, small sewage and water line pipes, and other areas which could cause claustrophobia. Noise Levels Over 2/3 of the time: * Loud noise (example: large earth-moving equipment) * Very loud noise (example: jack hammer work, front row at rock concert) Less than 1/3 of the time: * Very quiet conditions (example: forest trail, isolation booth for hearing test) * Quiet conditions (example: library, private office) * Moderate noise (example: business office with computers and printers, light traffic) Supervision Received Close Supervision: The incumbent is assigned duties according to specified procedures and receives detailed instructions. Work is checked frequently. Personal Protective Equipment is required when in the Plant, Yard or Construction Areas: * Hard Hat * Safety Glasses * Steel-toed Boots * Hearing Protection * Reflective Vest

This position is responsible for welding accurate, quality parts according to instructions and within specified time frame, using the appropriate tools and/or equipment according to safety and quality standards. Candidate should be able to perform adjustments needed to ensure factory settings and specifications by using schematics, engineering documents and precedent to weld parts and submitting welded parts to quality control or appropriate team leader. ESSENTIAL FUNCTIONS: * Fabricate parts as directed by Supervisor * Understand and perform weld machine setup * Understand and read blueprints * Perform accurate, quality fabrication in a timely manner * Submit fabricated parts to Quality Control. * Maintains tools, equipment, and workspace * Complies with Established Policies * Clock in and out of work orders. NON-ESSENTIAL FUNCTIONS: * Regularly clean tools, equipment, and workspace throughout the shift. * Clean and detail tools, equipment, and workspace at the end of every shift. * Follow instructions regarding routine maintenance and/or treatment for tools, equipment, and workspace. * Complies with established procedures. * Manages time and resources by using company resources in order to maximize productivity and accomplish tasks on time. * Demonstrate commitment to an Injury-Free Environment by actively participating in company safety programs. * Comply with all aspects of the corporate environmental, health and safety program. SKILLS: * MIG welding experience is required (3 year minimum). * TIG welding experience a plus. * Blueprint reading. PAY RATE: * $24.00-$29.00 REPORTING RELATIONSHIP: Supervisor MENTAL ABILITIES: * Ability to work harmoniously with others * Ability to accept and follow instruction * Ability to maintain positive attitude LIFTING: Average Weight: 25 lb. Frequency: Daily

Full-time Description Blower and Dempsay (********************** is a family-owned business in the heart of Santa Ana. We offer competitive benefits and the ability to work with a team of talented individuals. We currently have a need for a Millwright/Fabricator/Welder. Listed below are the requirements for the position. Job Summary Conveyor Millwright is responsible for the installation, maintenance, and repair of industrial conveyor systems. This role ensures equipment operates safely, efficiently, and in compliance with company standards. The ideal candidate will possess strong mechanical aptitude, problem-solving skills, and proficiency with a wide range of tools and technical documentation. Key Responsibilities Installation: Assemble, install, and calibrate conveyor systems based on blueprints, schematics, and technical manuals. Maintenance: Perform routine inspections and preventative maintenance, including lubrication, gear alignment, and bolt tightening. Repair: Diagnose mechanical and electrical issues, replace worn components, and restore equipment to operational condition. Dismantling & Moving: Safely disassemble, relocate, and reassemble machinery as required. Troubleshooting: Identify root causes of equipment malfunctions and implement effective solutions. Requirements Blueprint Reading: Ability to interpret technical diagrams and service manuals. Tool Proficiency: Skilled in using hand tools, diagnostic instruments (e.g., calipers, micrometers), and welding equipment. Mechanical Aptitude: Strong understanding of mechanical systems and components. Problem-Solving: Capable of analyzing issues and executing timely repairs. Safety Awareness: Strict adherence to safety protocols when working with heavy machinery. Physical Fitness: Able to work in physically demanding environments, including heights, confined spaces, and awkward positions. Working Conditions Exposure to industrial environments with heavy machinery. May require lifting, climbing, and working in tight or elevated spaces. Use of personal protective equipment (PPE) is mandatory. Salary Description $26.00 to $35.00 hour

Full-time Description The Welding Technician III is a senior-level position responsible for leading complex welding projects, mentoring junior technicians, and ensuring the highest quality standards. This role requires expert knowledge of welding techniques and the ability to handle challenging tasks with precision and efficiency. Key Responsibilities Perform expert-level welding tasks using MIG, TIG, and arc welding equipment. Lead the preparation and set-up of welding projects, ensuring optimal workflow. Ensure adherence to safety standards and regulatory requirements. Conduct comprehensive inspections and non-destructive testing to verify weld quality. Perform maintenance and advanced troubleshooting of welding equipment. Read and interpret intricate blueprints and technical specifications. Mentor and train Welding Technician I and II personnel, sharing best practices and expertise. Work closely with engineers, project managers, and other stakeholders to ensure project success. Recommend process improvements to enhance efficiency and quality. Requirements Qualifications High school diploma or equivalent; advanced technical certification or associate degree preferred. 5+ years of welding experience. Mastery of MIG, TIG, and arc welding techniques. Ability to read and interpret highly complex blueprints and technical drawings. Strong leadership and mentorship abilities. Excellent problem-solving skills and attention to detail. Effective communication and teamwork skills. Ability to manage multiple projects and meet tight deadlines. Physical Requirements Ability to lift up to 100 pounds. Capable of standing for prolonged periods. Exposure to noise, dust, and fumes typical of a welding environment. Excellent vision, including close-up work and the ability to distinguish colors. Salary Description $25.00 - $28.00

About HMT HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. We are looking for a capable Welder who will be responsible for cutting and joining metals and other materials at our facilities or construction sites, using appropriate equipment. Your job will be to provide safe foundation for strong infrastructure. You should be competent in using potentially dangerous equipment following all safety precautions, have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is also required. We will provide PPE, FRC, tools and equipment. We will also pay and train on safety. Welder responsibilities are: Explore and follow blueprints and drawings, taking measurements to plan layout and procedures Prepare the appropriate welding equipment or method based on requirements Prepare components for welding according to specifications (such as powered saws to match measurements when cutting material) Use angle grinders to prepare the parts that must be welded Use calipers, rulers etc. and clamp pieces to align components Use manual or semi-automatic welding equipment in various positions to weld components Check welded surfaces and structures for flaws by testing and inspecting them Keep your equipment in a condition that does not compromise safety Travel is required (75%+) Required Qualifications: Minimum 5 years' experience as a Welder using Flux Core (FCAW) and Stick (SMAW) Must have 2 years' experience in Tank Welding Must be able pass 2G/3G/4G Welding Test 7018/6010 Must have reliable transportation Must be willing to work overtime and weekends TWIC Card Preferred Qualifications: Solid experience using a variety of welding equipment and procedures, such as Flux Core and Stick able to use the automatic welding equipment The Goat and the 3 o clock Experience with cutting torch and arc gouging Solid experience using electrical or manual tools, such as saws, squares, calipers and so on Excellent knowledge of relative safety standards and willingness to use protective clothing, such as face-shield and gloves Good ability to read and interpret technical documents and drawings Agility, professionalism, and close attention to detail Successful completion of a relevant apprenticeship program is required Professional Certification, such as AWS welding certificate, will be a bonus HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Job Posting Start Date 10-08-2025 Job Posting End Date 11-14-2025 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Structural Welder located in USA, Fontana Ca. Reporting to the Warehouse Manager the Structural Welder is responsible for welding structural steel (c-channels) to fabricate the framing for sheet metal enclosure buildings using welding equipment and techniques. This position uses the FCAW process. What a typical day looks like: Plans details of work order procedures; gathers required tools and materials based on instructions and specifications provided for the job. Lay out, position, align, and secure parts prior to assembly Weld structural steel (c-channels) in flat, vertical, or overhead positions using welding techniques and equipment Clamp, hold, or tack weld parts to obtain required configurations and positions for welding Determine required equipment and welding techniques, applying knowledge of metallurgy, geometry, and welding techniques Maintains, organizes, and cleans equipment and the work area. Notifies supervisor when faulty equipment or defective materials are discovered. Complete all other duties as assigned The experience we're looking to add to our team: High School Diploma or equivalent Completion of a formal apprenticeship OR 2+ years' experience in dual shield welding process Certification required: AWS D1.1 FCAW (Flux Core Arc Welding) Reading comprehension skills with the ability to interpret and follow written directions, blueprints, and drawings including weld symbols Basic math skills to meet technical specifications and measurements Thorough understanding of machines and tools used in welding techniques including designs, uses, maintenance, and repair Ability to demonstrate proficiency in the FCAW process for structural welding. Ability to read a tape measure. Ability to make jigs and setups Overhead crane operation a plus What the physical requirements are: Must be able to weld components that are vertical, flat, or overhead. Must have enough manual dexterity and stability as required for precision work. Must be able to see details at close range. Must be able to lift up to 35 pounds at times. Must be able to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. Must wear PPE, such as respirator, welding equipment, gloves, safety glasses, hard hat, and ear protection, while working on the production floor What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$21.30 USD - $28.75 USD HourlyJob CategoryOperations Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter

Job Description Labor One Staffing is hiring Shipyard Structural Welders in San Diego. Qualifications Must be able to qualify in two gas shielded FCAW welding processes 71T-1 and 811N3 in the three positions. Knowledge of welding characteristics of metal. Must be able to work at heights, confined spaces, and any assigned shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Job Duties Welds parts in position for fabrication of vessels, tanks or other structural assemblies. Uses carbon electrodes to cut, shape and groove metal. May prepare workplace for welding by cleaning and/or preheating. Examines weld sizes of weld beads. Cleans weld area; sweeps and removes scrap. Other job duties as may be assigned relevant to the trade. Physical/Mental Involvement Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. Labor One Staffing is an Equal Opportunity Employer Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

Description Now hiring-SPOT WELDERColtonMonday-Friday 5AM-1:30PMPay rate: $17h/rSpot welding- will be trained Will be welding small pieces of A/C units together Strong attention to detail TEMP TO HIRE-UNION BENEFITS**Contact us today618 S MT Vernon AveSuite 130San Bernardino, CA 92410(909)238-5848Follow us on Instagram!Syncstaffing_CA Type: Full-time

We are seeking a motivated and experienced, Tungsten Inert Gas (TIG) Welder to join our aerospace manufacturing team. This position is ideal for individuals who have experience and are eager to grow within a structured and supportive environment. You will assist in the welding, fabrication, and assembly of propellant space tank systems and sub-assemblies. Pay Range: $40 to $60 per hour.

Job DescriptionDescription: Join our expanding team! Tri Star Industrial is a leading distributor of pipe, valves, fittings, tanks, and industrial supplies, proudly serving a wide range of industries. With deep local roots and national reach through the Venturi Supply platform, our mission is to deliver the critical materials, custom solutions, and reliable service our customers depend on. At the heart of everything we do is our people. From the shop floor and counter to the job site and field, our team's expertise, commitment, and problem-solving mindset set us apart. Their dedication fuels our service, drives our accuracy, and ensures every order is handled with care and urgency. Backed by strategically located branches, a vast inventory, in-house fabrication capabilities, and decades of real-world experience, our teams connect infrastructure and industry to the essential resources they need to operate safely, efficiently, and successfully. We're more than a distributor-we're a trusted partner built on strong relationships, operational know-how, and a relentless focus on customer success. Role Overview The role of Welder includes construction of various fabricated parts and assembly from engineered prints by cutting, fitting, and welding. Responsibilities Operates welding equipment to fabricate components and assemblies including structural frames, piping, tanks, and ASME pressure vessels. Read blueprints and drawings to build designed fabrications. Determine the appropriate welding equipment or method based on welding procedures. Lay out and fit up fabricated components with tight tolerances indicated in drawings/prints using appropriate tools. Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead) which may be subjected to non-destructive testing (NDE including but not limited to Xray, PT, MT, UT). Visually inspect welds and material and repair flaws by cutting, grinding, or air arc. Maintain equipment in condition that does not compromise safety. Keep a clean and organized work area. Performs additional duties as assigned or required. Requirements: High School Diploma or GED Required. Certified in GTAW ASME IX required. 1 or more years of experience in TIG. 1 or more years of experience using tools relevant to welding and fabrication (saws, squares, grinders, torches, etc.) Ability to read and interpret technical documents and drawings. This includes welding symbols and fabrication instructions on blueprints. Able to read a tape measure and utilize math skills required for fabrication. Ability to effectively communicate [written and verbal]. Thrives in a collaborative team environment. Detailed oriented work style comfortable with multiple priorities being juggled while maintaining a consistent work approach. Physical requirements: Lift/push/pull 50 lbs., bend twist, stand for extended periods of time. Climb and reach for items, use an overhead crane, forklift, and endure frequent exposure to outside weather conditions. Ability to pass a background check, MVR check, and drug test. Benefits We're dedicated to our employees' and their families' health and well-being. Benefits begin on the first of the month following 30 days of employment. Exceptional Health Coverage Two medical plans, including HSA-qualified, with virtual care. Dental and vision coverage, including kids' orthodontia. HRA reimbursement eligibility. Employer-paid life and long-term disability insurance. Smart Financial Benefits 401(k) plan: Pre-tax and Roth options plus a generous employer matching contribution. Time Off & Work-Life Balance Enjoy 10 paid holidays and accrue PTO from your first day. Flexible workplace culture with career growth opportunities. Wellness & Support Access a robust Employee Assistance Program (EAP) with 24/7 support for you and your family. Resources to support mental, emotional, and financial well-being. Culture that Works for You Join a team that values integrity and innovation. Grow as a leader in industrial distribution with cutting-edge automation and supply chain solutions. Be part of a company that prioritizes people over profits. Venturi Supply and its affiliated companies are dedicated to fostering a diverse and inclusive workplace. We are an equal opportunity employer and do not discriminate against individuals based on race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or any other legally protected status.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR f6yCdUDfWi