Welder jobs in Salt Lake City, UT - 70 jobs

Welding Procedure: MIG Pulse Welding Test: 2G and 3G test PRINCIPAL DUTIES AND RESPONSIBILITIES: Set-up/run RT & UT Quality Code Welds Set-up/run UT Quality Nozzle/Branch Welds Set-up/run Carbon Arc Gouging Able to make any UT or RT Weld Repair Clean and stamp all welds Set-up/run all non-code vessel welds Layout and Fit vessel components Set-up and run all oxy-fuel cutting/burning Ability to read drawings, WPS's/ PQR's Ability to make correct decisions Speed of accomplishing tasks Proper, professional housecleaning Ability to work safely Average Percent of weld repairs Reliable and Punctual Attendance Positive and Cooperative Attitude Benefits Medical, Dental, Vision Plans Free Telemedicine Free Life insurance Vacation time Federal Holiday Pay

Metal Prep Specialist / Welding Apprentice Department: Production / Welding Reports To: Production Manager and Welding Lead Rate: Non-Exempt / Hourly, $18-$19 The MTI Metal Prep Specialist is responsible for preparing metal parts and materials for fabrication, finishing, and assembly. This includes cleaning, grinding, sanding, deburring, and inspecting metal components to ensure they meet quality and production standards. The ideal candidate will have attention to detail, experience with metalworking tools, and a strong commitment to safety and efficiency. The end goal is to deliver quality precision parts for assembly of best-in-class MTI medical exam and procedure chairs. Key Responsibilities: Clean, deburr, and sand metal surfaces using hand tools, grinders, and power tools. Inspect raw and cut materials for defects, cleanliness, and conformity to specifications. Operate machinery such as belt sanders, angle grinders, and deburring tools. Follow blueprints, work orders, and standard operating procedures (SOPs). Handle and move raw materials and finished parts using proper lifting techniques or material-handling equipment. Maintain cleanliness and organization of work area and prep equipment. Report any damaged or defective materials or tools to supervisor. Adhere to safety procedures and wear proper personal protective equipment (PPE). Collaborate with team members and other departments to meet production goals. Qualifications: High school diploma or equivalent (GED) preferred. 1+ years of experience in a metal fabrication, welding, or manufacturing environment preferred. Familiarity with hand tools, grinders, and basic metalworking equipment. Ability to read and interpret technical drawings or work instructions. Physically able to stand for extended periods and lift materials up to 50 lbs. Basic math and measurement skills. Strong work ethic and attention to detail. Willingness to learn and follow instructions. Company: MTI (Medical Technology Industries, Inc.) Company Overview MTI (Medical Technology Industries, Inc.) is a leading manufacturer of the highest-quality medical/surgical power chairs. MTI is a fast-growing business which remains true to its family-focused culture and values. We are very proud of our innovative, high-quality work and products. We value our employees and understand how everyone contributes to our products, processes, and customer experience. We provide a casual, friendly workplace and encourage employee growth and development. Visit mti.net to learn more. Benefits You'll Enjoy. Medical, vision, dental Health Savings Account (HSA) & Flexible Spending (FSA) 401k plan with employer match with vesting starting day 1 Paid time off Paid holidays Annual bonus incentive $5250 annual education/tuition assistance Company events, lunches, and giveaways MTI is an equal employment opportunity employer.

Join LACO - Celebrating 50 Years of Innovation! At LACO Technologies, we have been at the forefront of vacuum and leak testing innovation for 50 years. The systems we design allow our customers to make a difference in many industries. We are seeking an experienced TIG Welder to join our team. This position is for a senior-level welder for TIG and MIG welding of stainless steel and aluminum vacuum chambers, frames, and fixtures. The successful candidate will have a minimum of 7-10 years of experience in TIG welding of stainless steel or aluminum plates. Our welders work in a clean, organized, temperature-controlled shop. Welders at LACO play an integral part of our manufacturing process. At LACO Technologies we strive to give our employees a great work-life balance. We offer our employees the opportunity to participate in a 9/80 work schedule giving our employees every other Friday off. This benefit along with our flexible scheduling options and generous PTO offering makes LACO a company worth considering for employment. Responsibilities: Welding of stainless steel or aluminum plate using TIG and MIG welding techniques Able to fit & weld vacuum chamber tanks ranging in size from 4” to 8' in diameter. Ability to fit & weld pipe from 1/8” to 36” in diameter. Proficient in layout skills. Reading and interpreting blueprints, schematics, and engineering drawings to determine specifications for welding projects. Performing quality checks on completed work to ensure the finished product meets specifications. Experience with manual lathes, mills, Iron Worker, metal rolls, grinding and rolling processes, and saws a plus. Maintaining a safe and organized work environment Participating in team meetings and contributing to process improvements Troubleshooting and problem-solving to ensure projects are completed on time and to a high level of quality. Ability to lift, push, or pull up to 50 pounds. Ability to work with our engineering team and communicate properly. Must have a high focus on safety and the ability to learn and follow LACO's safety standards. We need a hard-working individual who is dependable and on time to work each day. Requirements Requirements: High school diploma Minimum of 7-10 years of welding experience Experience in vacuum chamber welding helpful Experience building big parts 60” and larger Job Details: Shift: 5 days/week Monday-Friday Full-Time. There is also the option of a 9/80 work schedule where you will get every other Friday off. Pay: Hourly rate: $33.00 - $36.00 an hour depending on experience Benefits: Generous benefits package that includes: medical, dental, vision, short and long-term disability, accident, hospital indemnity, critical illness, legal protection services, pet insurance, identity theft protection, cancer guardian, company-paid life insurance, and 401K with match, paid holidays, and a generous PTO (paid time off) plan of three weeks your first year, company paid continuing education opportunities including a tuition reimbursement program, periodic company parties, and lunches. Location: Salt Lake City, UT Equal Opportunity Employer: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. EOE, including disability/veteran. About LACO Technologies LACO Technologies, Inc., is a leading manufacturer of vacuum and leak testing systems. Driven by innovation, service, and quality, we strive to be the best provider of standard and custom vacuum and leak testing solutions serving the Aerospace, Automotive, Medical/Pharmaceutical, and other technology industries. Each day you will be exposed to new challenges and interesting applications and help our customers succeed in their mission by providing exceptional products. Our company culture thrives on the core values of Passion, Integrity, and Trust. If you take pride in your work and exhibit integrity in all you do, then LACO is the place for you. LACO's customers are the likes of SpaceX, Apple, NASA, Northrop Grumman, Lockheed, Boeing, and Merck. We are a leading-edge technology company serving Aerospace, Automotive, Medical/Pharmaceutical, and other technological industries. Come work where you will get a small company feel with big company opportunities, benefits, and technology. Salary Description $33.00 - $36.00 per hour

Job Description SHOP WELDER/FABRICATOR Fineline Steel Fabrication has immediate openings for SHOP WELDERS/FABRICATORS to work at our steel fabrication facility. Previous experience with .045-1/16 wire welding process is a plus as well as experience with structural steel fabrication. This is a full-time position, must be able to work overtime as needed. Must be able to pass a pre-employment drug test, pass a background check and have reliable transportation to get to and from work. Personal welding equipment and tools are required. Training will be provided. Qualifications: Proficient in assigned welding techniques Ability to read and comprehend shop drawings Running iron worker, plasma cutter, band saw Interpretation of drawings, including weld requirement symbols Working knowledge of fixturing and weld set up (amps, volts, etc.) Conventional and precision measuring instruments Process inspection, certification, and documentation Welding equipment maintenance Finish grinding applications using manual and power tools Safety and housekeeping Certifications are not required and can be completed in-house Must be able to pass pre-employment drug test and pre-employment background check Work Hours: Monday-Thursday from 6:30 AM - 4:30 PM. 10 hours per day, minimum of 40 hours per week and overtime as necessary or until work is completed. Related Safety Responsibilities: Must become familiar and compliant with Fineline's safety program and OSHA regulations. Must maintain fitness level sufficient to handle his/her required work load. Understands, is familiar with, and follows equipment safety requirements. Is always vigilant and aware of his/her own safety as well as the safety of those around him/her. Management Discretion: The job duties and requirements that this document describes may be altered or supplemented at any time at the sole discretion of the employer. Equal Employment Opportunity for All: Fineline Steel Fabrication embraces federal employment guidelines regarding equal opportunity and affirmative action. It is the policy of Fineline Steel Fabrication to provide equal employment opportunity to all qualified applicants and employees. Fineline Steel Fabrication is an affirmative action employer and does not unlawfully discriminate on the basis of race, color, religion, gender, national origin, age, disability, or veteran status in any condition of employment including, but not limited to, recruitment, hiring, training and promotion.

Essential Duties & Responsibilities Perform aluminum welding using MIG and/or TIG processes in accordance with welding procedures and blueprints Read and interpret blueprints, drawings, and welding symbols Set up, operate, and maintain welding equipment and tools Inspect completed welds to ensure quality, strength, and appearance standards are met Perform minor repairs or rework as needed Follow all safety procedures, including proper use of PPE Maintain a clean and organized work area Meet production goals while maintaining quality and safety standards Communicate effectively with supervisors and team members regarding job progress or issues Assist with other fabrication or production tasks as assigned Medical Insurance Dental Insurance Vision Insurance Critical Illness Insurance Accident Insurance Supplemental Life Insurance (Employee, Spouse and Children) 401(k) contribution after 30 days + company match on first 3% Weekly Accrued PTO Company Paid Short Term and Long Term Disability Company Paid Life Insurance Job Summary: Weld team members are responsible for welding quality trailer with outstanding service in a safe manner and must be able to manufacture in a fast paced, team-oriented environment while maintaining a clean and organized work area. Ensure your own safety by always using designated personal protective equipment (PPE) and tools designed and rated for the task, complying with safety regulations and maintaining a clean and organized workspace. Report to work on time to support production startup and throughput goals. Operate all power tools and machinery on the weld line(s) effectively and respectfully. Read and understand work orders and work instructions. Perform quality checks and product inspections by completing final inspection sheets, as directed by assigned production supervisor. Perform daily inspections on equipment prior to shift startup to ensure the safety of you and your coworkers, as well as the operational effectiveness of equipment. Assist in other areas and perform other duties, as needed. (This is not intended to be a comprehensive list of activities, duties, or responsibilities required for this job.) Qualifications and Requirements High School Diploma / GED, or equivalent demonstrated skills and abilities in directly job-related experiences. Possess good physical stamina and coordination with the ability to safely lift 80 pounds with prolonged periods of standing. Able to work 10 hour shifts with potential overtime. Willing to submit a pre-employment background check. Able to work in a self-directed way to manage multiple demands of time and attention in a fast-paced manufacturing environment. ************* Novae LLC provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Novae LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

ABOUT US: Leading metals manufacturing company JENNMAR is seeking to fill Welder positions at its plant in Clearfield. Primary duties include performance of MIG, TIG, and stick-weld processes to operate welding equipment/machines. At JENNMAR fabrication takes place in our more than twenty strategically located manufacturing facilities associated with our affiliated brands. From bolts and beams to channels and trusses, to resin and rebar, and more, JENNMAR is uniquely positioned to accommodate our customers' industrial fabrication needs. EDUCATION/EXPERIENCE: * HS/GED/Vo-Tech Welder Certification Required; * AWS Certification A plus; * One-to-Three (1-3) Years MIG, TIG, Stick-weld Experience Preferred or a combination of education and experience; * ISO experience a plus. JOB REQUIREMENTS: * Dependability to be consistently at work and on time with ability to work 40+ flexible schedule including weekends; * Fundamental listening, verbal, and written communication skills; * Functional math skills including knowledge of fractions and decimals; * Ability to verify product dimensions using micrometers, calipers, and other precision measuring instruments; * Special, form, and depth perception with finger and manual dexterity to perform welding processes; * Repetitive standing, twisting, reaching, squatting capability during normal phase duties; * Close visual acuity, near/far vision, and multiple limb coordination * Moderate/heavy lifting capability (up to 65 lbs.) * Team member mentality with ability to follow safety and standard operating procedures with a quality assurance mindset and adherence to proper PP requirements * Excellent benefits include medical with a standard PPO plan with deductibles as low as $1,500 and wellness credit up to $750; free concierge primary care; voluntary 401k plan currently matching up to 12%; voluntary dental and vision plans; free telemedicine services; basic life, long and short term disability coverage. EOE M/F/D/V

Full-time Description Job Type: Full-Time Who We Are Universal Industrial Sales is committed to being the leader in the fabrication of steel highway products by maintaining the best service, knowledge, and quality in our product lines. Our reliable team creates innovative high-quality steel products for our customers in a safe, positive, team-oriented environment, at competitive prices. What We Offer Fair hourly compensation plus bonuses and incentives 8+ hours overtime each week $4.00/hr Night Differential Free Health Insurance Free Life Insurance Dental, Vision, and Supplemental Life Benefits Accident, STD, Critical Illness Insurance Free Employee Assistance Program Paid Vacation Time Paid Sick Time Paid Holidays 401k + 4% Company Match Opportunities for Advancement Who You Are The FCAW Arc Welder 1G/3G constructs, fits, and welds components using drawings and pre-cut parts. You must be capable of reading drawings, weld symbols, and weld procedures. These must be assembled and welded per stringent quality standards and meet all specified codes. The use of all basic steel fabrication tools is needed and expected. Responsibilities Prepare posts, frames, rails, or assembles for welding Verify all dimensions with the approved shop drawings Verify welding is in accordance with the specific codes and weld procedures Adjust welding equipment as needed Make fixtures as necessary to improve productivity Make backing bars if needed Perform welds as specified and directed by your supervisor Clean and prepare finished products for inspection Keep your personal tools and assigned tools and equipment in proper working order Communicate with your supervisor Work must be completed in a timely manner consistent with the best in the industry Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required FCAW 1G or 3G experience Interpret weld procedures Ability to be crane certified Ability to be forklift certified Understand AWS codes and procedures Must be able to read and utilize a measuring tape Able to sit 2% of the time Able to Stand 90% of the time Able to walk 30% of the time Lift up to 75 pounds 10% of the time Environment This job requires outdoor work and indoor in all weather conditions with extreme temperatures. Majority of work is done indoors in a heated area. Day Schedule: M-Th 6am - 4:30pm, Fri 6am - 2:30pm (Saturday's as needed) Night Schedule: M-Th 4pm - 2:30am, Fri 2pm - 10:30pm (Saturday as needed) Starting Pay: 1G $18.36 - $26.65 DOE +OT ($4.00/hr night differential) Starting Pay: 3G $19.38 - $29.26 DOE +OT ($4.00/hr night differential) We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, or any other status protected by law.

If you're interested in joining a team environment with a family atmosphere, come see us today! Making it safe for our employees is #1 at Mity. Come see how You Matter here! Current operations are first shift, Monday - Thursday: 4:30am - 3pm or 5am-3:30pm Mity-Lite is a leading manufacturer of multi-purpose conference, banquet, and institutional furniture based in Orem, Utah. We're looking for Production MIG Welders to join our production department. MityLite offers a competitive wage and benefits package. Come join our team! Benefits Include: Medical Insurance Dental & Vision Insurance Life Insurance 401K Plan with 4% company match Paid Time Off (40 hours year one - 80 hours year two) Sick Pay Holiday (80 hours per year) Referral Bonus Program ($200 per referral - NO CAP!) *Some benefits begin at 60 days dependent on policy statement Responsibilities/Duties require: Fast Paced Welding and Fabrication Manual lifting and moving parts/boxes/product with typical weights of 10 to 50 lbs. Frequent bending, twisting and reaching. Other duties as assigned. Qualifications include: Prior Welding experience required (Practical test required) Must be able to work standing for the complete shift (10+ hours) Work is in a fast paced environment and producing high quantities while meeting quality standards and guidelines. Job seekers will receive consideration without regard to disability or protected veteran status.

TempToFT We're looking for Structural Welder with strong skills in MIG, TIG, and flux-core processes, and a proven track record in fabrication. The ideal candidate will be mechanically inclined, able to read and interpret technical drawings, and comfortable working in a fast-paced shop environment. Wage and Shifts Wage: $18.00 - $28.00 + per hour, DOE Shift availability may vary by department, with opportunities typically available on Shifts Available: Day Shift Swing Shift You will be able to indicate your preferred shift during the application process. We strive to accommodate preferences where possible based on business needs. Key Responsibilities • Perform high-quality MIG, TIG, and FCAW welding on structural steel components and assemblies • Weld in multiple positions, including 3G vertical up and 4G overhead groove welds on 3/8” mild steel plate • Perform flat-position MIG welds on materials ranging from 14-gauge sheet to 5-gauge plate, ensuring proper heat control and penetration • Read and interpret blueprints, welding symbols, and engineering drawings • Work with prefabrication equipment such as brake presses, CNC machines, turrets, lasers, and water jets • Fabricate, assemble, and modify parts as required • Ensure all work meets QES quality and safety standards • Maintain a clean and organized work area in accordance with 5S practices Qualifications • 2+ years of welding experience in a manufacturing or industrial environment • Completion of a welding program or trade school (preferred) • At least 3-4 industry-relevant roles listed on resume • Strong attention to detail and a commitment to quality • Ability to work independently and as part of a team Proficiency in MIG, TIG, and FCAW-G welding processes, with the ability to pass weld tests in: 3G vertical up groove weld (structural plate) 4G overhead groove weld using FCAW-G MIG flat welds on thin to medium-gauge mild steel (14GA-5GA)

Essential Duties & Responsibilities Perform aluminum welding using MIG and/or TIG processes in accordance with welding procedures and blueprints Read and interpret blueprints, drawings, and welding symbols Set up, operate, and maintain welding equipment and tools Inspect completed welds to ensure quality, strength, and appearance standards are met Perform minor repairs or rework as needed Follow all safety procedures, including proper use of PPE Maintain a clean and organized work area Meet production goals while maintaining quality and safety standards Communicate effectively with supervisors and team members regarding job progress or issues Assist with other fabrication or production tasks as assigned Medical Insurance Dental Insurance Vision Insurance Critical Illness Insurance Accident Insurance Supplemental Life Insurance (Employee, Spouse and Children) 401(k) contribution after 30 days + company match on first 3% Weekly Accrued PTO Company Paid Short Term and Long Term Disability Company Paid Life Insurance Job Summary: Weld team members are responsible for welding quality trailer with outstanding service in a safe manner and must be able to manufacture in a fast paced, team-oriented environment while maintaining a clean and organized work area. Ensure your own safety by always using designated personal protective equipment (PPE) and tools designed and rated for the task, complying with safety regulations and maintaining a clean and organized workspace. Report to work on time to support production startup and throughput goals. Operate all power tools and machinery on the weld line(s) effectively and respectfully. Read and understand work orders and work instructions. Perform quality checks and product inspections by completing final inspection sheets, as directed by assigned production supervisor. Perform daily inspections on equipment prior to shift startup to ensure the safety of you and your coworkers, as well as the operational effectiveness of equipment. Assist in other areas and perform other duties, as needed. (This is not intended to be a comprehensive list of activities, duties, or responsibilities required for this job.) Qualifications and Requirements High School Diploma / GED, or equivalent demonstrated skills and abilities in directly job-related experiences. Possess good physical stamina and coordination with the ability to safely lift 80 pounds with prolonged periods of standing. Able to work 10 hour shifts with potential overtime. Willing to submit a pre-employment background check. Able to work in a self-directed way to manage multiple demands of time and attention in a fast-paced manufacturing environment. ************* Novae LLC provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Novae LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Essential Duties & Responsibilities Perform aluminum welding using MIG and/or TIG processes in accordance with welding procedures and blueprints Read and interpret blueprints, drawings, and welding symbols Set up, operate, and maintain welding equipment and tools Inspect completed welds to ensure quality, strength, and appearance standards are met Perform minor repairs or rework as needed Follow all safety procedures, including proper use of PPE Maintain a clean and organized work area Meet production goals while maintaining quality and safety standards Communicate effectively with supervisors and team members regarding job progress or issues Assist with other fabrication or production tasks as assigned Medical Insurance Dental Insurance Vision Insurance Critical Illness Insurance Accident Insurance Supplemental Life Insurance (Employee, Spouse and Children) 401(k) contribution after 30 days + company match on first 3% Weekly Accrued PTO Company Paid Short Term and Long Term Disability Company Paid Life Insurance Job Summary: Weld team members are responsible for welding quality trailer with outstanding service in a safe manner and must be able to manufacture in a fast paced, team-oriented environment while maintaining a clean and organized work area. Ensure your own safety by always using designated personal protective equipment (PPE) and tools designed and rated for the task, complying with safety regulations and maintaining a clean and organized workspace. Report to work on time to support production startup and throughput goals. Operate all power tools and machinery on the weld line(s) effectively and respectfully. Read and understand work orders and work instructions. Perform quality checks and product inspections by completing final inspection sheets, as directed by assigned production supervisor. Perform daily inspections on equipment prior to shift startup to ensure the safety of you and your coworkers, as well as the operational effectiveness of equipment. Assist in other areas and perform other duties, as needed. (This is not intended to be a comprehensive list of activities, duties, or responsibilities required for this job.) Qualifications and Requirements High School Diploma / GED, or equivalent demonstrated skills and abilities in directly job-related experiences. Possess good physical stamina and coordination with the ability to safely lift 80 pounds with prolonged periods of standing. Able to work 10 hour shifts with potential overtime. Willing to submit a pre-employment background check. Able to work in a self-directed way to manage multiple demands of time and attention in a fast-paced manufacturing environment. ************* Novae LLC provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Novae LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

About the role As a Welder/Pipe Fitter at Quantum Industrial Services, you will be responsible for welding and fitting piping systems with precision and quality workmanship. This role requires at least four years of welding experience and certifications in ASME Section IX for stainless and carbon steel unless hired for a specific project. You'll work with construction documents, including plans and shop drawings, to complete installations on time and within budget. Additional responsibilities include ensuring fire safety, attending weekly safety meetings, maintaining tools and equipment, and keeping job sites organized. If you're a skilled welder/pipe fitter looking for a dynamic and safety-focused work environment, we want to hear from you! What you'll do 1. All projects must be constructed with VO quality workmanship. 2. All projects must be completed to the customer's approval and acceptance within budget and time allowed. 3. Arrive at the jobsite on time, ready to work with tools and safety equipment. Make arrangements for carpooling if possible. If necessary, crews will work beyond 3:30 if progress of project is behind or if situations arise that require additional attention. 4. Attend weekly safety meetings and work in a safe manner every day to prevent injuries or accidents. 5. Complete timecard on a daily basis with accurate job numbers, cost codes, and hours. Turn into jobsite superintendent or foreman every Monday for review. 6. Responsible for daily jobsite cleanup and keeping inventory in trailers organized. Secure tools and materials on site. Maintain and service tools and welders or report repair issues to shop. 7. Must be able to read construction documents it: plans, shop drawings, and specifications. 8. Provide adequate fire safety and wear PPE at all times. 9. Assist co-workers for on-the-job training and reach safety practices. Be a positive influence. 10. Keep welding certificate current. Qualifications 1. 4 years welding experience. 2. Certifications in ASME Section IX - stainless and carbon steel unless hired for specific project only. 3. Must be approved through workforce committee.

Join Our Team! At Petersen our team members are not just employees they are members of the Petersen- A Precinmac community. We recognize that a company is only as good as it's team members and ours are incredible! Petersen offers a competitive benefits package which includes 4x10 work schedule, food market breakrooms. Competitive wage, quarterly bonuses, referral bonuses for selected positions. Wellness program, medical, dental, vision, disability, life, 401k with employer match. Paid time off, and holiday pay. On the job training programs and training reimbursement. We also offer multiple team member engagement activities and community events. Fitter/Welder Level II Farr West, UT Job Summary: Will read blueprints, fit and/or oversee fitting, expedite parts, weld and/or oversee welding. Take ownership of job to meet customer and schedule requirements. Essential Functions: Read blueprints Be able to supervise a crew and complete a job from start to finish without direct supervision Expedite all parts throughout the plant as necessary to meet production goals Solve all obstacles related to the job he/she is running Take ownership for meeting customer and schedule requirements Be a living example of our principles of unity, trust, honesty, integrity, creativity, and self-reliance Knowledge, Skills, and Abilities: Must be able to make all welds uniform and clean, and complete work to customer's specifications Pass Blueprint test: Read all weld symbols on a blueprint Differentiate between channel, angle, flat bar, square tube, pipe etc. Pass basic plate weld test (visual and bend) within specified time requirements, in four out of the five weld processes used at Petersen Inc: F.C.A.W. - Stainless and mild steel: 3G, and 6G position G.M.A.W. - Mild steel: 3G position G.T.A.W. - Stainless and aluminum: 3G, and 6G position S.A.W. - Sub arc: 1G position is a plus but no required Must know how to calculate Arc length and circumference Know how to calculate Bolt Circles, Chord Length, and Flat Pattern Must be able to work well in a team environment Able to listen well, understand concerns, and gain cooperation to solve problems quickly and effectively. Must be efficient and productive with time Must maintain an acceptable attendance and safety record Maintain safe environment. Minimum Requirements: High School education or GED preferred. Four years of shop or field welding. Must be able to understand implicit and explicit instructions and react favorably in all work situations. Must be able to resolve problems, handle conflicts, and make effective decisions under pressure. Ability to do math calculations, especially trigonometry. Essential Physical Functions: Requires lifting, stooping, bending and stretching to accomplish grinding, welding and other assigned duties. Requires ability to work at different heights. Requires correctable vision to within normal range to perform clean and uniform welds and read blueprints. Requires standing, bending and stooping for extended periods of time. Safety Requirements: Must not pose a direct threat or significant risk of substantial harm to the safety or health of himself/herself or others Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all the employer's safety policies and rules and must be willing to report safety violations and potential safety violations to appropriate supervisory or management personnel. Equipment Used (but not limited to): Welder, Grinder, Gouge, Drills, Tools. Travel: Must be available and willing to travel as the employer determines is necessary or desirable to meet its business needs. Working Conditions: Works in a typical fabrication shop environment. Occasionally called upon to work overtime. Working conditions may vary according to weather. Requires ability to work in heat and cold/ Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time Petersen is proud to be an Equal Opportunity, Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, or veteran status. If you are unable to complete this application due to a disability, contact Petersen at ************ to ask for an accommodation or an alternative application process. Petersen participates in E-Verify, the federal program for electronic verifications of employment eligibility.

Job Description The Structural Steel Welder is responsible for fitting, welding, and assembling structural steel components using flux-core welding processes in accordance with drawings, specifications, and safety standards. This position is essential in producing high-quality steel assemblies for EZARC's fabrication operations. Key Responsibilities Perform flux-core (FCAW) welding on structural steel per project drawings and weld symbols. Read and interpret blueprints, weld symbols, and fabrication drawings accurately. Fit, align, and secure parts using clamps, jigs, fixtures, and measuring tools. Inspect completed welds for quality and conformance to specifications. Safely operate overhead cranes, jib cranes, and forklifts to handle materials and assemblies. Maintain welding equipment, tools, and workspace in clean, safe condition. Follow all company safety policies and participate in required pre-task planning and safety meetings. Work collaboratively with supervisors, fitters, and other team members to ensure quality and production goals are met. Report any material defects, drawing discrepancies, or unsafe conditions to supervision immediately. Qualifications High school diploma or equivalent. Minimum of 2 years' experience in flux-core welding of structural steel preferred. Ability to certify a 3G test using 3/8 Plate and 1/16 wire. Ability to read and interpret blueprints and welding symbols. Certification to AWS D1.1 standards preferred. Knowledge of safe rigging and material handling. Strong attention to detail, quality, and safety. Physical Requirements Ability to stand, bend, and lift up to 50 lbs. for extended periods. Comfortable working in a fabrication shop environment with varying temperatures and noise levels. Shift Schedule: 4:30 PM to 2:30 AM; Paid Lunch; $1.50 Shift Differential

Looking for experienced Storage Tank welders to staff several upcoming jobs. Must provide resume showing Tank Experience to be considered for position. Reliable transportation is a must. Wage is based on weld test and experience. Pay Range $26-$34. We work Nationwide and our Headquarters is located in Kaysville, UT. This is a full time position where you are eligible for benefits, PTO, Show-up pay, Per diem $700 a week, 401K after 1 yr of service, bonus programs and incentives. We put you to work with a crew and then you move with the crew from job to job. We try to keep you working as much as possible. But it is construction so we only have so much control. Requirements Must be able to pass a DISA drug test and Background Check. Benefits Full time position: Eligible for benefits (Medical, Dental, Vision, PTO, Show-up pay, Per diem $700 a week, 401K with match after 1 yr of service, bonus programs and incentives. #ZR

TempToFT We're looking for Structural Welder with strong skills in MIG, TIG, and flux-core processes, and a proven track record in fabrication. The ideal candidate will be mechanically inclined, able to read and interpret technical drawings, and comfortable working in a fast-paced shop environment. Wage and Shifts Wage: $18.00 - $28.00 + per hour, DOE Shift availability may vary by department, with opportunities typically available on Shifts Available: Day Shift Swing Shift You will be able to indicate your preferred shift during the application process. We strive to accommodate preferences where possible based on business needs. Key Responsibilities • Perform high-quality MIG, TIG, and FCAW welding on structural steel components and assemblies • Weld in multiple positions, including 3G vertical up and 4G overhead groove welds on 3/8” mild steel plate • Perform flat-position MIG welds on materials ranging from 14-gauge sheet to 5-gauge plate, ensuring proper heat control and penetration • Read and interpret blueprints, welding symbols, and engineering drawings • Work with prefabrication equipment such as brake presses, CNC machines, turrets, lasers, and water jets • Fabricate, assemble, and modify parts as required • Ensure all work meets QES quality and safety standards • Maintain a clean and organized work area in accordance with 5S practices Qualifications • 2+ years of welding experience in a manufacturing or industrial environment • Completion of a welding program or trade school (preferred) • At least 3-4 industry-relevant roles listed on resume • Strong attention to detail and a commitment to quality • Ability to work independently and as part of a team Proficiency in MIG, TIG, and FCAW-G welding processes, with the ability to pass weld tests in: 3G vertical up groove weld (structural plate) 4G overhead groove weld using FCAW-G MIG flat welds on thin to medium-gauge mild steel (14GA-5GA)

Job Description The Structural Steel Welder is responsible for fitting, welding, and assembling structural steel components using flux-core welding processes in accordance with drawings, specifications, and safety standards. This position is essential in producing high-quality steel assemblies for EZARC's fabrication operations. Key Responsibilities Perform flux-core (FCAW) welding on structural steel per project drawings and weld symbols. Read and interpret blueprints, weld symbols, and fabrication drawings accurately. Fit, align, and secure parts using clamps, jigs, fixtures, and measuring tools. Inspect completed welds for quality and conformance to specifications. Safely operate overhead cranes, jib cranes, and forklifts to handle materials and assemblies. Maintain welding equipment, tools, and workspace in clean, safe condition. Follow all company safety policies and participate in required pre-task planning and safety meetings. Work collaboratively with supervisors, fitters, and other team members to ensure quality and production goals are met. Report any material defects, drawing discrepancies, or unsafe conditions to supervision immediately. Qualifications High school diploma or equivalent. Minimum of 2 years' experience in flux-core welding of structural steel preferred. Ability to certify a 3G test using 3/8 Plate and 1/16 wire. Ability to read and interpret blueprints and welding symbols. Certification to AWS D1.1 standards preferred. Knowledge of safe rigging and material handling. Strong attention to detail, quality, and safety. Physical Requirements Ability to stand, bend, and lift up to 50 lbs. for extended periods. Comfortable working in a fabrication shop environment with varying temperatures and noise levels.

We are seeking an experienced Tank / Welding Foreman to join our team. You will help drive high-quality and on-schedule Tanks completions through efficient management of people and equipment of exciting industrial construction projects across the nation. Come help us build America! ***Locations across the US**** ****Subsistence paid depending on location $500 to $700 weekly**** ****Health care benefits**** ****Vacation / 401K**** Wage is Based on Experience Safety and Quality are our top priorities RESPONSIBILITIES SAFETY · Model and ensure safe work practices at all times, compliant with GBI and customer requirements PEOPLE · Provide daily leadership and focus on strong work ethic and positive morale for crew. · Handling of relevant employee discipline and/or coaching needs in a timely manner. · Daily recognition of employee accomplishments. PROCESS · Ensure job site organization and housekeeping goals are met. · Ensure adherence to all company and customer policies and procedures by crew. PRODUCTION · Help drive crew productivity · Other duties as assigned. Requirements Qualifications: 1+ years experience construction tanks Strong safe work performance including use of proper PPE and adherence to company safety policies. Current TWIC card Proven history of dependable work practices and strong work ethic Certification in forklift and crane operation as well as welding techniques Ability to multi-task and to work independently and with minimal direction Proven ability to communicate effectively in writing, verbally and in-person using English language Ability to work a flexible work schedule and travel as required. Ability to routinely perform physical duties including but not limited to lifting up to 50 lbs., climb stairs and ladders, standing and walking for periods of time, working in confined spaces, and occasional work in inclement weather. Ability to pass pre-employment and random drug testing as well as pre-employment physical and background check. Benefits Health Vision Dental Life 401K PTO

Job Description We are seeking an experienced Tank Building Superintendent to join our team. You will oversee high-quality and on-schedule Tanks completions through efficient management of people, equipment and customer expectations of exciting industrial construction projects across the nation. Come help us build America! Wage is Based on Experience ***Locations across the US**** ****Subsistence**** ****Health care benefits**** ****Vacation / 401K**** Safety and Quality are our top priorities RESPONSIBILITIES SAFETY · Model and ensure safe work practices at all times, compliant with GBI and customer requirements PEOPLE · Provide daily leadership and focus on strong work ethic and positive morale for crew. · Handling of relevant employee discipline and/or coaching needs in a timely manner. · Daily recognition of employee accomplishments. PROCESS · Ensure job site organization and housekeeping goals are met. · Coordination of communication between office, customers and crew. · Completion of weekly progress and forecasts reports in a timely and accurate manner. · Attendance at all monthly superintendent calls and assigned company meetings. · Ensure timely completion of required paperwork including employee evaluations. · Ensure adherence to all company and customer policies and procedures by crew. PRODUCTION · Accountability for and management of all materials, equipment, tools, consumables, and labor expended · Other duties as assigned. Requirements Qualifications: 3+ years experience construction tanks Current TWIC card Strong management of safe work performance including use of proper PPE and adherence to company safety policies. Strong ability to manage people, production and process Strong ability to read and interpret blueprints Strong ability to plan workflow and hours worked Proven history of dependable work practices and strong work ethic Certification in forklift and crane operation as well as welding techniques Ability to multi-task and to work independently and with minimal direction Proven ability to communicate effectively in writing, verbally and in-person using English language Ability to represent GBI in a professional manner. Ability to work a flexible work schedule and travel as required. Ability to routinely perform physical duties including but not limited to lifting up to 50 lbs., climb stairs and ladders, standing and walking for periods of time, working in confined spaces, and occasional work in inclement weather. Ability to pass pre-employment and random drug testing as well as pre-employment physical and background check. Benefits Health Dental Vision Life 401K PTO