Welder jobs in Spring Hill, TN - 36 jobs

Job DescriptionClassified/Welder Columbia, TN, US The Sheet Metal Fabricator is responsible for fabricating, assembly, install, and repair of sheet metal products and equipment, such as ducts, related duct work components. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal operating welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. ESSENTIAL DUTIES AND RESPONSIBILITIES Set up and operation of hydraulic press brake; forming various sheet metal parts such as rectangular to round transitions, rectangular transitions and rectangular duct. Set up and operation of plate rolls; material size ranges from 20 gauge to 3/8” plate. Set up and operation of sheet metal shear. Must be able to calculate best cut to minimize scrap. Must be able to MIG weld from 24 gauge to 3/8” plate; galvanized, stainless, and carbon steel material. Must understand or be willing to learn the forming process of various sheet metal parts such as pressed elbows, gorelocked elbows, collars, sleeves, tee branches, reducers, etc. Must understand or be willing to learn the operation of plate rolls, spot welders and various machines in the process of forming parts; forming material that ranges from 24 gauge to 3/8” plate. Reads assembly prints and procedures Other job duties as assigned. EDUCATION AND EXPERIENCE High school diploma or GED required. Trade or Technical School Degree preferred. 3-5 years of experience in sheet metal fabrication. A minimum of four (4) years experience in welding is required. Good mechanical skills. Basic math skills and the ability to read assembly prints and procedures. Ability to lift up to 50 lbs and remain standing for the majority of the work day. You should be proficient in: Mechanical Assembly Skills Machines & technologies you'll use: MIG Welder

KEY RESPONSIBILITIES * Reads and interprets blueprints and test sheets; gathers and organizes all parts in a logical building order. * Determines appropriate work surface (table, saw horse, floor). * Grinds parts as necessary in preparation for welding and finalizing. * Sets welding gun to correct thickness; operates welding gun and plasma torch to weld and cut necessary holes. * Produces quality welds on a variety of metals (mild steel, aluminum, stainless and galvanized steel), while operating in horizontal, vertical and overhead positions. * Visually inspects work to ensure that all parts are correctly welded to TCF engineering and quality standards (no holes, splatter or incorrect measurements). * Tags product; requests supervisor/team lead inspection of product. * Operates forklift/bridge crane/pallet jack to deliver product to wash or blast booth. * Act, Live, and Behave by TCF Core Values. * Additional duties may be assigned, dependent upon location and product line. QUALIFICATIONS * High school diploma or GED * 12+ months' related experience and/or training (technical school) or equivalent combination of education and experience. Vocational technical school preferred. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals written in English. * Basic math skills to include addition, subtraction, multiplication and division in all units of measure including whole numbers, fractions and decimals. Ability to read a tape measure. * Ability to use tools in a safe and proper manner. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: * Forklift Certificate * Bridge Crane Training * Welding Certificate(s) as needed * Fall Protection Training * Compressed Gases Training PHYSICAL DEMANDS/WORKING CONDITIONS To successfully perform the essential function of this position, employees must have the ability to: * Continuously lift/move up to 25 pounds; frequently life/move up to 50 pounds; and occasionally pull up to 100 pounds with wheels (pallet jack). * Continuously stand; walk; use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. * Occasionally climb, balance, stoop, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. * Specific vision abilities required include close vision, color vision, distance vision, peripheral vision and depth perception. WORK ENVIRONMENT While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes or airborne particles, caustic chemicals and vibration. The noise level in the work environment is usually loud. SAFETY Twin City Fan is dedicated to providing a safe and healthy work environment. Each and every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety, and Twin City Fan expects every employee to work in a safe and conscientious manner.

Full-time Description The Company Metro Door, an OnPoint Company is one the nation's leading manufacturers of security and life safety closure products OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Metro Door Metro Door is one of the nation's leading manufacturer of security and life safety closure products including rolling steel doors, rolling grilles, security shutters, insulated doors, hurricane rated doors and more! Founded in 1980, Metro Door has sold thousands of rolling and sliding grilles, coiling service doors and rolling shutters for interior and exterior applications in every part of North America. Our customers come first. At Metro Door, we're dedicated to providing only the best security closure products and quality customer service. This commitment is the cornerstone on which we've built our solid reputation. Benefits At Metro Door we believe that OUR PEOPLE are what make us great and help us deliver exceptional customer service! We offer industry leading Benefits to include: Competitive pay - Plus incentive opportunities! Full benefits package that starts day one - Includes medical, dental, vision, 401K with match, company-paid life insurance and disability coverage. PTO and Paid Holidays Training and mentoring - Learn from our experts in the industry Advancement opportunities Please view our benefits page to learn more about the Benefits to all Metro Door employees. The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. Job Summary The Product Welder will be responsible for assembling materials together. Key Job Responsibilities Review shop sheets. Identify, cut and assemble the materials. MIG weld assemblies together as required. Utilize torch or plasma cutter to cut materials per instructions. Follow the set flow and process established within their department and perform the work with zero defects. Encouraged to make suggestions to the shop lead of any tools that save assembly time. Wear assigned PPE for each job function. Perform hazard assessments and maintain a high standard of safe work practices and quality control. Follow company and OSHA safety rules and guidelines. Avoid injuries and damage to property, loss of unused materials and clean-up of work area debris. Completes all necessary company training in a timely manner. Other duties as assigned by supervisor. Requirements Experience in welding, steel fabrication and electrical. Able to do MIG welding. Certification, preferred. Ability to use a torch and plasma cutter. Ability to verify dimensions using measuring instruments such as calipers and tape measures. Proficiency in adding and subtracting fractions. Experience in Mechanical, Commercial, and Industrial Maintenance. Experience with Hydraulics and Pneumatics is preferred but not required. Experience with Warehouse and Commercial doors, is a plus. Ability to thrive in a fast paced, technology driven, service environment. Follows all safety procedures in performing work, as well as company policies. Able to work without supervision. Occasionally, will work in a team environment. Ability to work with individuals from diverse backgrounds and with diverse needs and across remote offices. Strong communication, problem solving, and analytical skills. Technical school training and OEM certification, is a plus. Ability to work overtime. High School Diploma or GED is required. The selected candidate will be required to pass a criminal history background check. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to wear approved Personal Protective Equipment (PPE), carry tools, use hands to maneuver, handle or feel, and hear and talk. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally required to stand and stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move tools and equipment up to 100 pounds. Specific vision abilities required by this job include close vision and the ability to adjust focus. Employees must maintain a high level of self-awareness about their surroundings due to the high level of high voltage AC/DC power in the work environment. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The work is performed in various locations, including warehouses, distribution centers, manufacturing plants, refineries and hospital settings. Employees may work with co-workers' side-by-side with a moderate level of activity being performed. Exposure to high voltage AC/DC power is very common in many work environments. The noise level in the work environment is moderate to high. The OnPoint Group and Metro Door considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group's Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company's good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay. Salary Description $19-21/hr

The welder is responsible for welding structural metal products using various equipment including welders, shears, grinders, ironworker, or plasma cutters, and for the maintenance of welding equipment. Requirements · Read blueprints & drawings and take or read measurements to plan layout for a specific job. · Prepare work via the use of grinders, calipers, rulers, and clamp pieces. · Operate manual and automated welding units in various positions (vertical, horizontal, etc.) according to job requirements · Fabricate new or replacement parts by reading blueprints and use of measuring devices. · Maintain length of the arc and speed of movement to form a specified depth of fusion and bead. · Examine weld for bead size and other specifications. · Grind or clean weld joint of workpiece. · Repair improperly welded pieces and fill holes. · Tack assemblies together. · Able to wear specialized protective or safety equipment · Assemble component parts using hand and small power tools. · Maintain equipment and change hoses, fittings, air valves, suspension parts, etc. when required · Ensure efficient and timely processing of various job orders by organizing work to be performed according to complexity, materials used, anticipated completion time, etc. · Account for time and work completed via online computer terminal data collection system. · Meet established standards for productivity and quality. Confer with the supervisor when problems occur that impact expected levels of performance. · Comply with plant safety procedures to ensure a safe environment . Education: · High school diploma or general education degree (G.E.D.) · Welding certificate highly preferred. Experience and Background: · 2 - 4 years of Steel & Aluminum Experience · Wire Feed welding, Fabrication with Welding & Layout · Mechanical with Hydraulics (preferred) · Comfortable using power tools, pneumatic wrenches, grinder; etc. · Demonstrate competency in basic shop math · Ability to read and understand blueprints and other shop drawings. · Flexible and responsive, with a strong teamwork orientation. · Good verbal and written communication skills. · Desire to learn new skills and improve technical knowledge. · Commitment to quality and accuracy of work performed and continuous improvement. · Ability to carry out instructions furnished in written, oral, or diagram form. · Possess the ability to drive for results, hold self-accountable, and continuously improve. Physical Requirements The majority of the job function is performed in a manufacturing environment requiring high safety precautions. JC Ford Company is an equal-opportunity employer and drug-free workplace. All qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability (mental or physical), pregnancy, status as a parent, family medical history, genetic information, political affiliation, military service/protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. We will consider for employment, qualified applicants with criminal histories, consistent with the requirements of applicable federal, state, or local agencies.

The welder is responsible for welding structural metal products using various equipment including welders, shears, grinders, ironworker, or plasma cutters, and for the maintenance of welding equipment. Requirements · Read blueprints & drawings and take or read measurements to plan layout for a specific job. · Prepare work via the use of grinders, calipers, rulers, and clamp pieces. · Operate manual and automated welding units in various positions (vertical, horizontal, etc.) according to job requirements · Fabricate new or replacement parts by reading blueprints and use of measuring devices. · Maintain length of the arc and speed of movement to form a specified depth of fusion and bead. · Examine weld for bead size and other specifications. · Grind or clean weld joint of workpiece. · Repair improperly welded pieces and fill holes. · Tack assemblies together. · Able to wear specialized protective or safety equipment · Assemble component parts using hand and small power tools. · Maintain equipment and change hoses, fittings, air valves, suspension parts, etc. when required · Ensure efficient and timely processing of various job orders by organizing work to be performed according to complexity, materials used, anticipated completion time, etc. · Account for time and work completed via online computer terminal data collection system. · Meet established standards for productivity and quality. Confer with the supervisor when problems occur that impact expected levels of performance. · Comply with plant safety procedures to ensure a safe environment . Education: · High school diploma or general education degree (G.E.D.) · Welding certificate highly preferred. Experience and Background: · 2 - 4 years of Steel & Aluminum Experience · Wire Feed welding, Fabrication with Welding & Layout · Mechanical with Hydraulics (preferred) · Comfortable using power tools, pneumatic wrenches, grinder; etc. · Demonstrate competency in basic shop math · Ability to read and understand blueprints and other shop drawings. · Flexible and responsive, with a strong teamwork orientation. · Good verbal and written communication skills. · Desire to learn new skills and improve technical knowledge. · Commitment to quality and accuracy of work performed and continuous improvement. · Ability to carry out instructions furnished in written, oral, or diagram form. · Possess the ability to drive for results, hold self-accountable, and continuously improve. Physical Requirements The majority of the job function is performed in a manufacturing environment requiring high safety precautions. JC Ford Company is an equal-opportunity employer and drug-free workplace. All qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability (mental or physical), pregnancy, status as a parent, family medical history, genetic information, political affiliation, military service/protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. We will consider for employment, qualified applicants with criminal histories, consistent with the requirements of applicable federal, state, or local agencies. Requirements:

We are seeking welders to join our team, specializing in Flux Core Welding on Mild Steel. The role involves utilizing MIG, TIG, and other welding techniques, interpreting blueprints, and collaborating effectively within a team under supervision. **Responsibilities** + Perform Flux Core Welding on Mild Steel. + Utilize MIG and TIG welding techniques as required. + Read and interpret blueprints accurately. + Collaborate with team members and work under the guidance of a supervisor. + Ensure quality and precision in welding tasks. **Essential Skills** + Proficiency in Flux Core, MIG, and TIG welding. + Ability to read and interpret blueprints. + Previous welding experience of 3-6 months. + Strong team collaboration skills. **Work Environment** The role is based in an outdoor environment, which can be very hot. Safety is a priority, and you are required to wear steel-toed ankle-high leather boots, long sleeves, and pants. Contact lenses are not permitted due to welding smoke. 2nd shift from Monday to Friday, **3:15 pm to 12:45 am** **Job Type & Location** This is a Contract to Hire position based out of Ashland City, TN. **Pay and Benefits** The pay range for this position is $20.30 - $21.30/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Ashland City,TN. **Application Deadline** This position is anticipated to close on Jan 9, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Who We Are:

Arcosa Marine is searching for a safety-oriented Career Welder in our Ashland City, TN barge plant. Arcosa Marine Products, Inc., is part of Arcosa's Inland Barge Group, and is a leading manufacturer of barges used to transport cargo on U.S. inland waterways. Arcosa Marine Products manufactures dry cargo barges, including flat-deck and hopper barges, that are used to transport a variety of products including grain, coal, and aggregates. Arcosa Marine Products also manufactures tank barges that carry petroleum, fertilizer, ethanol, chemicals, and other liquid cargoes. It is the largest U.S. manufacturer of fiberglass hopper barge covers used primarily on grain barges. Additionally, Arcosa Marine Products provides a full line of deck hardware to the marine industry, including hatches, castings, and winches for towboats and dock facilities. What You'll Do: Follow Welding Procedure Specifications (WPS) Proficiently perform flat (1F), horizontal (2F), vertical (3F), and overhead (4F) fillet welds Inspect your own welds to make sure all Quality requirements are met. Follow all safety rules and practices. May be involved in safety committees or initiatives. Perform other duties as assigned. What You'll Need: Minimum of 1 year FCAW (flux-core weld) experience Must demonstrate ability to satisfactorily pass vertical fillet (3F) and overhead fillet (4F) weld tests using FCAW Ability to understand weld size requirements Ability to understand weld size and quality acceptance requirements and criteria Must be able to perform welding work while wearing all required personal protective equipment including, but not limited to, a filtering face piece and/or tight fitting respirator May require working above ground (15 ft or more) Must be able to climb ladders or stairs to reach objects; comfortable with heights May require working in narrow or confined work spaces for extended periods of time May require extensive kneeling, bending, walking and/or standing for long periods of time Willing to work overtime, weekends and holidays as needed

TempToFT Welder - $16.00 -$20.00 per hour 1st Shift: 7 AM - 3 PM 2nd Shift: 3 PM - 11 PM Monday - Friday (Must be available to work weekends) We are currently seeking a reliable candidate to fill an opening working as a Welder for a manufacturing facility in Pulaski, TN! This position's pay is based on experience. At minimum, the applicant should be a trade school graduate or have 1-3 years experience in a fabrication shop. Requirements: High School Diploma or Equivalent Must be able to pass a drug screen and background check Should be able to lift up to 50 pounds independently Able to work weekends as needed Knowledge and experience in GMAW, GTAW and SMAW welding For higher paying position, must be highly qualified in welding GMAW and GTAW carbon steel, stainless steel and aluminum This company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description GENERAL DESCRIPTION The Welder/Fabricator is responsible for fabrication and welding of metal parts to complete units and/or sub-units for SGS Machinery. WHY WORK FOR US? At Wells, we empower our team members to deliver an exceptional client experience. Our employees are talented problem solvers that shine in preconstruction, engineering, operations, and project management. They bring innovative solutions that yield outstanding results. In the design and construction industry, we focus on honesty and hard work to build trust that lasts beyond individual projects. Our team is consistently working to improve building processes and raise industry standards. We meet our partners' needs through collaborative efforts that ensure safe and certain results, reducing risks along the way. Together, we help businesses and individuals succeed and change our communities for the better. WHAT WE HAVE TO OFFER Wells values our employees and is committed to providing a competitive and comprehensive benefits package. Please note that the benefits listed here are for non-union employees. Benefits for union employees are covered under separate collective bargaining agreements which can be obtained through their union business agent or their HR representative. Health, dental and vision insurance Paid premiums for short- and long-term disability, and life insurance Wellness Incentives Paid holidays Flex spending for medical and daycare Health savings account (HSA) 401(k) plan with profit sharing Access to Nice Healthcare Employee Assistance Program Paid Time Off (PTO) Wishbone Pet Insurance Critical Illness Benefit Plan Accident Insurance Plan Voluntary Hospital Indemnity Plan Other benefits include Health and Family Care leave for both union and non-union employees. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools Move parts into position, manually or with hoists or cranes Lay out and examine metal stock or work pieces to be processed to ensure that specifications are met Verify conformance of work pieces to specifications, using squares, rulers, and measuring tapes Tack-weld fitted parts together Remove high spots and cut bevels, using hand files, portable grinders, and cutting torches Locate and mark work piece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications Hammer, chip, and grind work pieces to cut, bend, and straighten metal Set up face blocks, jigs, and fixtures Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components Study engineering drawings and blueprints to determine materials requirements and task sequences Straighten warped or bent parts, using sledges, hand torches or straightening presses. Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers Design and construct templates and fixtures, using hand tools Mark reference points onto floors or face blocks and transpose them to work pieces, using measuring devices, squares, chalk, and soapstone Lift or move materials and finished products, using large cranes EDUCATION, SKILLS, AND ABILITIES REQUIRED Three (3) years welding/fabrication experience required Ability to read blueprints and drawings Ability to use measuring devices, such as calipers, micrometers, tape measures, depth gauges, and fixed gauges PHYSICAL REQUIREMENTS/ ADA ESSENTIAL FUNCTIONS Physically able to lift up to 75 lbs, occasionally Physically able to push, pull, lift, bend, climb, kneel, twist, squat, crawl and use hands/forearms repetitively and frequently Ability to move around for up to 12 hours per day Ability to work from ladders, scaffolding, swing stages and man lifts at various heights frequently WORKING CONDITIONS Moderate to high risk of exposure to unusual elements Moderate to high risk of safety precautions Moderate to high exposure to production environment Wet, hot, humid, and wintry conditions (weather related) (plant specific) Ability to work outside year-round (plant specific) This position profile identifies the key responsibilities and expectations for performance. It cannot encompass all specific job tasks that an employee may be required to perform. Employees are required to follow any other job-related instructions and perform job-related duties as may be assigned by his/her supervisor. Wells is an Equal Opportunity Employer, including Veterans and Individuals with Disabilities. Wells participates in E-Verify and will provide the federal government with your I-9 Form information to confirm you are authorized to work in the U.S. #LI-JE1

Company / Location Information A.O. Smith is a global leader applying innovative technologies and energy-efficient solutions to products manufactured and marketed worldwide. The company is one of the world's leading manufacturers of residential and commercial water heating equipment and boilers, as well as a manufacturer of water treatment products for residential and light commercial applications. A. O. Smith is headquartered in Milwaukee, Wisconsin, with approximately 12,000 employees at operations in the United States, Canada, China, India, Mexico, the Netherlands, and the United Kingdom. Primary Function Are you a highly skilled and proactive Welding Technician with a strong focus on equipment reliability and continuous improvement? This critical role involves maintaining operational efficiency by performing mechanical and electrical maintenance, troubleshooting advanced welding and robotic equipment, and ensuring all processes meet rigorous quality standards. You will be a key contributor, working closely with Engineering, Production, and Maintenance teams to uphold the highest levels of safety and equipment uptime. If you have a strong mechanical aptitude, attention to detail, and thrive in a fast-paced production environment, we encourage you to apply! Responsibilities * Equipment Support & Troubleshooting: Support production by providing timely troubleshooting and maintenance for a variety of welding equipment, including: * Resistance projection welders * Robotic welding cells * Manual welding booths * Resistance mash seam welders * Robotic Maintenance & Repair: Mechanically and electrically rebuild, repair, and maintain Fanuc 6-axis robots. * This includes replacing motors, gearboxes, internal cables, and end effectors; performing greasing; and mastering/re-mastering robot groups. * Install and calibrate servo robot vision systems and teach coordinated motion. * Welding Process Management: Analyze and inspect welds, adjusting equipment settings to meet production and quality requirements/standards. * Modify and document program changes for welding equipment within accepted ranges. * Adjust and calibrate Servo Robot laser tracking software. * Replace and rebuild GMAW peripheral equipment. * System and Documentation: Maintain detailed records of work and tasks using SAP Work Orders. * Safety & Collaboration: Report equipment status and maintenance needs to leadership. Uphold all safety protocols, especially NFPA-70E and OSHA standards. * Training: Perform shop (on-the-job) and lab training for operators on various equipment and processes. Qualifications * High School Diploma or GED. * Completion of a TCAT or similar technical program with an emphasis on robotics is highly preferred. * 3+ years of related work experience working on a production floor. * 3+ years of related work experience with Gas Metal Arc Welding (GMAW). * 3+ years of related experience repairing 6-axis robots (mechanical and electrical troubleshooting). Technical Skills * Welding Systems Expertise: Strong knowledge of set-ups, changeovers, and mechanical/electrical troubleshooting for the supported welding equipment (listed above). * Robotics/Controls: * Expertise in Fanuc I/O: Ability to read, configure, set up, and manipulate (forcing) I/O. * Ability to teach tool center points (TCP) and install/calibrate vision systems. * Compliance: Must possess OSHA-10 Certification and NFPA-70E training. Core Competencies * Excellent communication (verbal & written) and organizational skills. * Proficiency in managing Microsoft Outlook Mail & Calendar for timely and prepared responses. * Strong mechanical aptitude and a proactive approach to equipment reliability. Education High School Diploma or GED Trade School Degree Physical Requirements * Must wear required Personal Protective Equipment (PPE) such as steel-toe shoes/boots, ear and eye protection. * Prolonged periods of sitting/standing and frequent bending and reaching. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. * The employee frequently is required to walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. * The employee must be able to lift and/or move up to 20 pounds overhead and maneuver various parts weighting up to 50 lbs. We Offer Competitive compensation package and comprehensive benefits plans which include medical and dental insurance, company-sponsored life insurance, retirement security savings plan, short- and long-term disability programs and tuition assistance. #LI-Onsite #LI-AO ADA Statement & EEO Statement In developing this job description care was taken to include all competencies needed to successfully perform in this position. However, for Americans with Disabilities Act (ADA) purposes, the essential functions of the job may or may not have been described for purposes of ADA reasonable accommodation. All reasonable accommodation requests will be reviewed and evaluated on a case-by-case basis. We consider all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. We also provide reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law. Nearest Major Market: Nashville Job Segment: Wastewater, Water Treatment, Electrical, HVAC, SAP, Engineering, Operations, Technology

The Welder supports Cooper Steel's goals, values, and philosophy by exhibiting the following behaviors: excellence, quality service, commitment, and accountability. As a member of Cooper Steel's team, performance includes demonstration of the following accountabilities: communication, teamwork, job knowledge and leadership. POSITION SUMMARY The Welder is responsible for understanding structural blueprints and welding techniques to execute the highest standards of welding performance. PRIMARY DUTIES AND RESPONSIBILITIES include the following: ·Interpret blueprints to fabricate structural steel ·Determine the appropriate welding equipment or method based on requirements ·Operate angle grinders to prepare the parts that must be welded ·Weld components using manual or semi-automatic welding equipment in various positions. ·Set up components for welding equipment in accordance to specifications (e.g. cut material with oxy/fuel torch to match measurements) ·Test and inspect welded surfaces and structure to discover flaws ·Maintain equipment in a condition that does not compromise safety ·Ensure work is done safely and meets quality standards ·Keep work areas clean and organized REQUIREMENTS: ·Proven experience as welder ·Experience using a variety of welding equipment and procedures (flux-core, MIG weld) ·Experience in using electrical or manual tools (grinder, squares, tape measure, hand tools) ·Ability to read and interpret technical documents and drawings ·Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.) ·Attention to detail ·Ability to learn safe overhead crane operations ·Proficient in English ·Professional Certification (e.g. an AWS welding certificate) will be a plus SUPERVISORY RESPONSIBILITIES No supervisory responsibilities QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE High School Diploma or equivalent Prior experience using overhead cranes is preferred Prior experience in a similar role is preferred OTHER SKILLS Strong interpersonal skills: ability to communicate effectively with a diverse range of individuals; good judgment; ability to handle multiple tasks simultaneously; ability to work effectively with others. While performing certain duties of the job, the employee is required to squat, bend, twist, lift, pull, and reach. Lifting is required up to 75 lbs. Must be flexible in hours worked and willing to work overtime. WORK ENVIRONMENT Position performs work mostly in the shop setting which includes a variety of working conditions. These include the following conditions: noise level fluctuations from moderate to high, use of personal protective equipment, machine/equipment use. Position involves everyday risks or exposure to elements that require safety precautions. Position will be required to work in adverse weather conditions such as heat, humidity, cold, precipitation, etc.

Use hand-welding equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Essential Duties and Responsibilities: Load parts into machine Activate machine Examine welded components to detect defects and make adjustments on the spot welder as necessary for different materials. Take completed parts off of machine for placement on pallet Repetitive use of hands, wrists, arms, bending/twisting and lifting up to 50lbs on a repetitive basis Wear all safety equipment and work in a safe manner Work well with the team environment Other job responsibilities, not listed above, may be required from this position, and will be directed by the immediate supervisor

Job descriptions may display in multiple languages based on your language selection. What we offer: At Magna, you can expect an engaging and dynamic environment where you can help to develop industry-leading automotive technologies. We invest in our employees, providing them with the support and resources they need to succeed. As a member of our global team, you can expect exciting, varied responsibilities as well as a wide range of development prospects. Because we believe that your career path should be as unique as you are. Group Summary: Cosma provides a comprehensive range of body, chassis and engineering solutions to global customers. Through our robust product engineering, outstanding tooling capabilities and diverse process expertise, we continue to bring lightweight and innovative products to market. Job Responsibilities: Position Requirements: * Able to understand, anticipate and follow direction while exercising maturity of judgement. * Available to work flexible hours and overtime in a fast-paced environment in order to meet customer requirements. * Effectively present information and respond to questions from all interested parties. * Comfortable working with power cutting tools, torches, air chisels and ultra-sonic weld inspection equipment. * Able to calculate figures and amounts, such as percentages and proportions. * Able to prepare, read and interpret written reports, instructions, procedures and guidelines * Travel, on rare occasions, may be required with occasional overnight accommodation at various locations. * Able to work off a ladder, aerial lift or plant roof at heights up to 40 feet off ground level. Education/Experience: Minimum of 1 year of Fanuc or two years of other robot experience required. Minimum of 1 year of spot and MIG welding whether manual or automated assembly. Awareness, Unity, Empowerment: At Magna, we believe that a diverse workforce is critical to our success. That's why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email or traditional mail to comply with GDPR requirements and your local Data Privacy Law. Worker Type: Regular / Permanent Group: Cosma International

Job DescriptionDescription: The Company Metro Door, an OnPoint Company is one the nation's leading manufacturers of security and life safety closure products OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Metro Door Metro Door is one of the nation's leading manufacturer of security and life safety closure products including rolling steel doors, rolling grilles, security shutters, insulated doors, hurricane rated doors and more! Founded in 1980, Metro Door has sold thousands of rolling and sliding grilles, coiling service doors and rolling shutters for interior and exterior applications in every part of North America. Our customers come first. At Metro Door, we're dedicated to providing only the best security closure products and quality customer service. This commitment is the cornerstone on which we've built our solid reputation. Benefits At Metro Door we believe that OUR PEOPLE are what make us great and help us deliver exceptional customer service! We offer industry leading Benefits to include: Competitive pay - Plus incentive opportunities! Full benefits package that starts day one - Includes medical, dental, vision, 401K with match, company-paid life insurance and disability coverage. PTO and Paid Holidays Training and mentoring - Learn from our experts in the industry Advancement opportunities Please view our benefits page to learn more about the Benefits to all Metro Door employees. The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. Job Summary The Product Welder will be responsible for assembling materials together. Key Job Responsibilities Review shop sheets. Identify, cut and assemble the materials. MIG weld assemblies together as required. Utilize torch or plasma cutter to cut materials per instructions. Follow the set flow and process established within their department and perform the work with zero defects. Encouraged to make suggestions to the shop lead of any tools that save assembly time. Wear assigned PPE for each job function. Perform hazard assessments and maintain a high standard of safe work practices and quality control. Follow company and OSHA safety rules and guidelines. Avoid injuries and damage to property, loss of unused materials and clean-up of work area debris. Completes all necessary company training in a timely manner. Other duties as assigned by supervisor. Requirements: Experience in welding, steel fabrication and electrical. Able to do MIG welding. Certification, preferred. Ability to use a torch and plasma cutter. Ability to verify dimensions using measuring instruments such as calipers and tape measures. Proficiency in adding and subtracting fractions. Experience in Mechanical, Commercial, and Industrial Maintenance. Experience with Hydraulics and Pneumatics is preferred but not required. Experience with Warehouse and Commercial doors, is a plus. Ability to thrive in a fast paced, technology driven, service environment. Follows all safety procedures in performing work, as well as company policies. Able to work without supervision. Occasionally, will work in a team environment. Ability to work with individuals from diverse backgrounds and with diverse needs and across remote offices. Strong communication, problem solving, and analytical skills. Technical school training and OEM certification, is a plus. Ability to work overtime. High School Diploma or GED is required. The selected candidate will be required to pass a criminal history background check. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to wear approved Personal Protective Equipment (PPE), carry tools, use hands to maneuver, handle or feel, and hear and talk. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally required to stand and stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move tools and equipment up to 100 pounds. Specific vision abilities required by this job include close vision and the ability to adjust focus. Employees must maintain a high level of self-awareness about their surroundings due to the high level of high voltage AC/DC power in the work environment. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The work is performed in various locations, including warehouses, distribution centers, manufacturing plants, refineries and hospital settings. Employees may work with co-workers' side-by-side with a moderate level of activity being performed. Exposure to high voltage AC/DC power is very common in many work environments. The noise level in the work environment is moderate to high. The OnPoint Group and Metro Door considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group's Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company's good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay.

We are seeking welders to join our team, specializing in Flux Core Welding on Mild Steel. The role involves utilizing MIG, TIG, and other welding techniques, interpreting blueprints, and collaborating effectively within a team under supervision. **Responsibilities** + Perform Flux Core Welding on Mild Steel. + Utilize MIG and TIG welding techniques as required. + Read and interpret blueprints accurately. + Collaborate with team members and work under the guidance of a supervisor. + Ensure quality and precision in welding tasks. **Essential Skills** + Proficiency in Flux Core, MIG, and TIG welding. + Ability to read and interpret blueprints. + Previous welding experience of 3-6 months. + Strong team collaboration skills. **Work Environment** The role is based in an outdoor environment, which can be very hot. Safety is a priority, and you are required to wear steel-toed ankle-high leather boots, long sleeves, and pants. Contact lenses are not permitted due to welding smoke. 2nd shift from Monday to Friday, **3:15 pm to 12:45 am** **Job Type & Location** This is a Contract to Hire position based out of Ashland City, TN. **Pay and Benefits** The pay range for this position is $20.30 - $21.30/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Ashland City,TN. **Application Deadline** This position is anticipated to close on Jan 6, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Who We Are: We are the global leader in worm gear, t-bolt, band, strut, specialty clamps, hose supports, conduit, fastening solutions, fittings, and couplings. Our products meet the highest standards demanded by global customers. A commitment to service and dedication to quality drive us each day. While billions of Ideal Tridon products have sealed critical connections for our customers, we continue to push the boundaries of innovative design. Our legacy and proven capabilities ensure that we're well-positioned to support new applications and emerging markets. At Ideal Tridon, whether it's the performance of our products or the responsiveness of our service, connections are at the heart of what we do. We are seeking a Robotic Welding Technician and Operator for our Smyrna, Tennessee Plant. Position Summary: We are looking for motivated individuals interested in coming to work on time and working hard. Responsibilities and pay will increase with experience. Self-starter, the ability to work with others, punctuality, a must. Shift: 2nd 3:30pm to 12:00am Schedule: Monday- Friday *Overtime as needed on Saturdays* Responsibilities: Primary responsibilities would include, but are not limited to the set-up, maintenance, and operation of robotic welding equipment. In this role, you will be responsible for the fabrication of metallic parts or assemblies through welding by the means of a robotic machine. May also be responsible for programming, maintaining, and troubleshooting welding robots, and implementing robotic welding into production. Additionally, you will: Ability to select and change tools per SOP. Apply principles of basic welding fundamentals, understand AWS symbols and blueprints. Visual inspection of parts to confirm correct weld path Identify and select correct robotic welding parameters, welding procedures, operations, and programs. Create robotic welding programs, modify existing welding programs, and conduct welding cell cycle time calculations. Troubleshoot and perform preventative maintenance of robotic equipment and welding equipment. Job Requirements: Strong analytical thinking, problem solving, and computer skills. Knowledgeable of automation equipment, processes, and systems Interpret blueprints and drawings. Adapt to technology changes quickly and seamlessly. Able to work independently and as part of a team. Able to safely lift up to 50 pounds. Manual dexterity in extremities to open and close clamps, grab onto parts and push buttons. Basic computer skills, e-mail, excel and time keeping systems. Education and Experience: Must be able to clear drug screen and background check. Must have reliable transportation. Reliably commute or plan to relocate before starting work (Required) High school or equivalent (Required) with classes in Robotics and/or Welding at the Junior College level. Certificate in Welding, Metals Fabrication or Machining and/or an associate's degree in Welding or Robotics. (Preferred) Training Requirements: Hi-Lo Certification Work Environment: Be able to work in a loud, noisy, and congested environment. May be expose to extreme temperatures hot and cold and dusty areas, work is performed inside and outside in all weather conditions, proper protective clothing is required to protect against extreme temperature conditions. Smoke from Welding Robot could be present. Eye, Ear and burn protection will be required for this position. Benefits: 401(k) & 401(k) matching Medical, Dental and Vision health insurance Employee assistance program Flexible spending accounts Health savings account Life insurance Paid Time Off/Sick Time Tuition reimbursement EEOC STATEMENT Ideal-Tridon is an Equal Opportunity Employer. Any recruitment, selection, promotion, transfer, discipline, compensation, training, and other personal actions involving persons in all job titles shall occur regardless of race, veteran/military status, color, disability, religion, age, national origin, genetic information, sex, and any other characteristic protected by law. PHYSICAL DEMANDS AND WORK ENVIRONMENT: The ideal candidate must be able to complete all physical requirements of the job without reasonable accommodation as you will frequently walk, use hands and fingers to handle or feel, operate, activate, inspect, place, detect, position, grasp or squeeze, stoop, kneel, crunch or crow, climb, talk/hear to communicate, detect, converse with discern, convey, exchange information; see to detect, distinguish, identify, inspect, estimate. Perform frequent repetitive movement, lifting, pushing, and pulling; up to 70 lbs., drive vehicles and operate equipment. This position requires assistance from coworkers when handling heavier items since Load pallets and skids may be up to 35-feet long and weight up to 200 lbs. Must wear required hearing and/or eye protection. PERSONAL PROTECTIVE EQUIPMENT: Safety shoes/boots and safety glasses are required. NOTE: All duties and responsibilities are essential functions and requirements and are subject to modification to accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Arcosa Marine is searching for a safety-oriented Career Welder in our Ashland City, TN barge plant. Arcosa Marine Products, Inc., is part of Arcosa's Inland Barge Group, and is a leading manufacturer of barges used to transport cargo on U.S. inland waterways. Arcosa Marine Products manufactures dry cargo barges, including flat-deck and hopper barges, that are used to transport a variety of products including grain, coal, and aggregates. Arcosa Marine Products also manufactures tank barges that carry petroleum, fertilizer, ethanol, chemicals, and other liquid cargoes. It is the largest U.S. manufacturer of fiberglass hopper barge covers used primarily on grain barges. Additionally, Arcosa Marine Products provides a full line of deck hardware to the marine industry, including hatches, castings, and winches for towboats and dock facilities. What You'll Do: * Follow Welding Procedure Specifications (WPS) * Proficiently perform flat (1F), horizontal (2F), vertical (3F), and overhead (4F) fillet welds * Inspect your own welds to make sure all Quality requirements are met. * Follow all safety rules and practices. * May be involved in safety committees or initiatives. * Perform other duties as assigned. What You'll Need: * Minimum of 1 year FCAW (flux-core weld) experience * Must demonstrate ability to satisfactorily pass vertical fillet (3F) and overhead fillet (4F) weld tests using FCAW * Ability to understand weld size requirements * Ability to understand weld size and quality acceptance requirements and criteria * Must be able to perform welding work while wearing all required personal protective equipment including, but not limited to, a filtering face piece and/or tight fitting respirator * May require working above ground (15 ft or more) * Must be able to climb ladders or stairs to reach objects; comfortable with heights * May require working in narrow or confined work spaces for extended periods of time * May require extensive kneeling, bending, walking and/or standing for long periods of time * Willing to work overtime, weekends and holidays as needed

1st shift opening - 5:30a-4:20p. 2nd shift opening - 4:00p-2:50a M-TH with Fri/Sat if needed The Resistance Weld Supervisor is responsible for maintaining and improving welding equipment to produce quality parts, ensuring safe and efficient machine operation by the department team. Assists the Plant Manager by taking charge of an operating shift and performing responsibilities of the manager on that shift. Essential Duties and Responsibilities: Must be able to set up, operate, and adjust all assembly equipment according to job requirements. Must be able to perform general maintenance and be responsible for product quality. Ability to troubleshoot mechanical problems as required. Ensure that training is properly completed. Report misuse or abuse of equipment, or finding that any poka-yoke has been bypassed. Support production and be willing to work overtime as required. Must portray good Safety, Quality, Housekeeping, Attendance Habits, and be able to perform in a team-oriented environment. Perform other tasks as required by the Plant Manager. Must be able to perform general maintenance, assembly equipment programming, and understand weld principals, weld schedule programming, and be responsible for weld quality. Must maintain spare parts/consumables necessary for production, record machine downtime, and track machine efficiencies. Interact with Engineering during new job startups and strive for continuous improvement. Mechanical/electrical set up and adjustments of equipment prior to production Aid in the startup of new equipment Maintain, troubleshoot, and repair assembly equipment as needed Instruct Weld Operators in the proper sequence of equipment Insure all safety, failsafe/poka-yoke, and ergonomic features are functional Update and keep accurate records of machine programs, production records, safety, and machine performance Continuously improve equipment and processes to make it safe and efficient as possible Support production Perform tip changes and Weld Cell Changeovers Understand and update Weld Run Schedule Understand input and output and PLC communication Other Duties: Continuous Improvement Continually works for improvement on non-conformance, scrap and variances to standard performance. Management Maintains training and ensures all assigned employees are aware of and comply with company procedures, policies and regulations. Develops among assigned personnel a consciousness for the need for teamwork to attain department objectives. With Plant Manager, conducts performance evaluation of each department employee and recommends performance increases, retraining, transfer or termination. Responsible for shift schedule to include: work station assignments/rotations, employee training, employee vacations, employee breaks, overtime assignment, and back-up for absent employees. Completes shift paperwork. Participates in LPA's, PFMEA (as required), Production Meetings and others as they apply. May participate in plant-wide safety/5S audits. Performs any other directly related appropriate duties as assigned. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be skilled with both hand and power tools. Must possess demonstrated mechanical and electrical aptitude. Previous manufacturing experience or related machine experience preferred: machine operator, general labor, or train with qualified TI Trainer for 60 days. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Use common sense to follow instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Strong personal leadership and communication abilities. In-company job experience as an above-average operator or fine mechanic. Supervisory Responsibilities: Supervises a team of Weld Operators and Weld Material Handler. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to sit and climb or balance. The employee must regularly lift and/or move up to 30 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Decision Making: As they apply. Financial Responsibilities: No authority to commit company funds. If purchases are required, requisition the purchasing department. Communication: (LANGUAGE SKILLS) Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively to employees of the organization. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually loud.