Welder jobs in Springdale, AR - 28 jobs

SummaryJob Description C23 Welder Working at our Cincinnati Aviation Component Service Center: Our ACSC facility develops and conducts a wide array of engine component repairs - including rotating parts, complex assemblies and nozzles on 29 different engine models. Role Overview: Perform layout, set-up, and weld on a variety of aircraft engine component parts and assemblies. Working from planning or written instructions, prints or sketches. Fabricate, repair or rework using all required welding and cutting processes which may include manual arc processes (GTAW, GMAW, SMAW, TIG) semi-automated weld processes (GTAW, PAW, LW, EBW,), machine weld processes (RSW, Dabber,) and oxyacetylene welding. In addition, may use oxyacetylene cutting, plasma cutting, flame brazing/soldering, TIG brazing and arc brazing. Use argon chambers and gas back-ups. Fabricate heat sinks and related items to perform individual weld operations. Using file, bench grinders, hand grinders, etc., to perform welding preparation, defect removal and manual dimensional restoration. Achieve certification on required processes. Ability to bench, planish, peen, roll, forge, stretch/shrink to restore dimensional and structural integrity on various engine hardware. Use all types of measuring instruments. Perform fluorescent dye penetrant as required, maintain associated paperwork, work to required levels of quality and efficiency. Direct or train others and perform related duties as required. Interact with engineers with the design of tooling and repair process on repair development projects. Required Qualifications: High school diploma or General Education Degree (GED) 5 years verifiable GTAW Weld experience including reading various measuring instruments, such as calipers and micrometer, while working from prints, sketches, planning instructions to weld a variety of parts and assemblies Preferred Qualifications: Previously held weld certification(s) in corrosive resistant and heat resistant ferrous alloys, nickel base alloys, cobalt-base alloys, aluminum alloys, and titanium alloys. Previous welding and fabrication experience on aircraft hardware. Ten years or more verified GTAW experience Ability to fabricate, repair or re-work using processes listed above; use of argon chambers and gas back-ups. Proficiency in the fabrication of heat sinks and related items for performing individual weld operations Demonstrated ability to use files, bench grinders, and various hand and power tools, etc. to restore areas repaired to required dimensions Experience with fluorescent dye penetrant. Weld schooling certificate (1 point) Additional Information: Must be able to lift and/or move up to 40 pounds on occasion. Items more than 40 pounds will be lifted with assistance. Must certify within 8 hours per base material group as required and periodic certification thereafter Ability to learn and operate material handling and lifting devices, including ability to obtain forklift license as required. Must be able to pass welding skills demonstration test Must pass the eye requirements per AWS D17.194 Closing: We strive to keep a fun and enjoyable shop atmosphere while maintaining the highest level of quality work output. We work together to make the impossible happen and we are looking for people like YOU to join us! We're looking for team-oriented individuals with the ability to share ideas and make recommendations with peers and leadership. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

The Welder is responsible for permanently fitting and welding of various metals to include but not limited to; steel, aluminum, and stainless steel parts using high heat application to form a permanent bond. May specialize in one of hundreds of different processes of welding to join metals together. Certification may be required depending of job specifications. ESSENTIAL DUTIES * Read blueprints and drawings and take or read measurements to plan layout and procedures * Be proficient in MIG (GMAW), TIG (GTAW), and Stick (SMAW) as required * Determine the appropriate welding equipment or method based on requirements * Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) * Operate angle grinders to prepare the parts that must be welded * Align components using calipers, rulers etc. and clamp pieces * Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead) * Repair machinery and other components by welding pieces and filling gaps * Test and inspect welded surfaces and structure to discover flaws * Maintain equipment in a condition that does not compromise safety * Determine welding position and type of metal to be fused * Ensure welds meet standards and specifications * Supervise machines or robots that perform automated welding tasks * Operate heavy equipment and machinery in the performance of these essential duties * Work with and around hazardous materials, as well as at heights and in confined spaces in the performance of these essential duties * Drive a vehicle to various jobsites throughout working hours a. Maintain valid driver's license and a driving record that meets company policy * Work in a constant state of alertness and in a safe manner * Regular attendance and punctuality are essential for employee job performance * Perform other duties as assigned ENVIRONMENT, PHYSICAL AND MENTAL REQUIREMENTS * Exposure to varying indoor and outdoor conditions, loud noise, dust, toxic chemicals and materials, varying fumes or odors; slippery or uneven walking surfaces; and work in ditches/excavations * Work at heights, such as by working on ladders, scaffolds, platforms, tops of single and multi-story buildings, as well as working in confined spaces such as underneath single story and multi-story building * Must be able to perform manual and repetitive tasks and body movements including standing and/or walking for long periods of time, bending, reaching, and/or gripping frequently, climbing, pulling and pushing * Must be able to lift up to 125lbs * May lift and carry heavy objects, stoop, kneel, crouch, or crawl in awkward positions * Must be able to complete job duties proficiently while adapting to changing demands and priorities * Must have the ability to work in a constant state of alertness and concentrate for long periods of time to perform duties in a safe manner * This position is subject to ergonomic testing SAFETY SENSITIVE This position is designated as a safety sensitive position because it includes as part of the job duties operating a motor vehicle, operating, maintaining, monitoring of heavy equipment and machinery, and working with and around hazardous materials, at heights, and in confined spaces. This position is one in which a lapse of attention could result in injury, illness, or death. For the safety of the employee and others, the employee must be able to work in a constant state of alertness and concentrate for long periods of time while operating, maintaining, and monitoring heavy equipment and machinery, and while working with and around hazardous materials, at heights, and in confined spaces. SKILLS AND COMPETENCIES * High school diploma or general education degree (GED) preferred * Minimum 1 year of experience or schooling is preferred * Welders certification may be required depending of job specifications * Knowledge of welding, structural brake forming and other fabrication processes along with automated welding techniques * Ability to communicate clearly with other employees * All employees must provide and maintain the required tool inventory for this position * Good organizational and time-management skills * Ability to complete daily tasks with limited supervision and minimal errors requiring re-work * Ability and willingness to work overtime and non-standard schedule: nights, weekends and holidays as/if required * A current valid driver's license is required BENEFITS MCC offers a comprehensive benefits package to include some of the following: * Medical, Dental, Vision * Basic and Optional Life Insurance, Accidental Death & Disability * 401k Retirement * Paid Time Off * Paid Holidays * Wellness Programs * Education Assistance

Description Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Rogers, AR. Most positions are first shift with a pay scale of $18-$22/hour based on experience & skill level. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: * MIG, TIG, Stick & Structural Welding * Air Arc * Repair Welding * Pipe & Mechanical * Flat/Vertical Carbon Steel Requirements: * Basic Tools for the Trade * Proper PPE must be worn: Have your own Hood and Gloves/Leathers Company Details Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: * Vacation Pay * Health insurance * 401(k) profit-sharing savings plan * Incentive programs * Tool purchase programs & MORE! Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen's full website. Recruiter Name Monica Segovia Location US-AR-ROGERS

Job Description Are you ready to be a part of something great? Industrial Equipment Services offers a broad range of services that includes not only fabrication and welding but maintenance and installation. We are seeking a qualified Welder/ Fabricator who is looking for a rewarding career. The position is responsible for operating welding equipment, measuring the dimensions of products and workpieces, and assembling workpieces to ensure proper assembly. By maintaining attention to detail and a high level of motivation, the Welder/ Fabricator will analyze diagrams and cut metal by operating the welding torch. By adhering to the job site and shop safety requirements, the position will operate equipment safely and maintain safe work habits. Three years of TIG stainless steel welding and fabrication experience is required. The Welder/ Fabricator must be available to work on the weekends. Industrial Equipment Services offers a full benefits package including health insurance, dental and vision plans, prescription drug plans, Aflac, 401K, vacation and holiday pay. If you enjoy ensuring accuracy in the welding and fabrication process, then this position is the perfect fit for you! Must be able to pass a pre-employment drug screening.

Job Responsibilities: Repair factory equipment and other industrial machinery, such as conveying systems, production machinery, screens, motors, and crushers. Maintains safe and clean working environment by complying with procedures, rules, and regulations. Contributes to team effort by accomplishing related results as needed. Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service. Perform welding and fabrication skills. Comply with safety regulations and maintain clean and orderly work areas. For consideration for this position, apply online: ************************************** Job Type: Full-time Required experience: Maintenance: 1 year WELDER City: Gravette Quarry at Sulphur Springs - State: Arkansas Part of the privately-owned Kemp Quarries group of companies, is a leading producer and supplier of construction aggregates, consisting primarily of crushed stone, sand and gravel spanning NE Oklahoma, SW Missouri and NW Arkansas. Job Description Summary • Adhere to and follow all safety rules and regulations of MSHA / DOT and company. • Conduct daily safety and equipment inspections. • Welding and fabrication • Communicate with shop regarding all repairs. • Other duties as assigned. Qualifications • Must pass a drug screen and criminal background check. • Welding certificate required. • Must maintain a safe driving record and have a valid driver's license. CDL beneficial. • Flexibility to work various schedules, primarily day shift, may travel to various work locations. • Must be reliable and hard-working. • Ability to operate varied types of heavy equipment. • May be required to complete DOT physical or MSHA certification. • This job has no supervisory responsibilities. • Presents numerical data effectively. • Able to read and interpret written information. Education • High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience. Required Skills • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and write routine reports and correspondence. • Ability to add, subtract, multiply, and divide in all units of measure. • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. • Priorities and plans work activities; Uses time efficiently. • Accepts responsibility for own actions. • Follows through on commitments. • Demonstrates accuracy and thoroughness in completing work. Monitors own work to ensure quality • Strives to complete work in timely manner. • Treats others with respect and consideration. Experience • Three (3) years previous welding experience with heavy equipment and/or rock crushing equipment. • Majority of experience in public works, crushing and/or construction industry, heavy equipment or maintenance facilities. • Remove and install parts, disassemble and assemble components, and test and adjust assemblies with minimal supervision. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually moderate. The Benefits to You • A culture that values and provides loyalty and commitment • Competitive pay • Comprehensive medical, dental, vision and short term disability programs • 401(K) with company match • Vacation

Why Join Us? L&L Metal Fabrication is a rapidly growing, family‑owned custom metal shop serving clients across Arkansas and beyond. We pride ourselves on quality craftsmanship, hands‑on mentorship, and a supportive team atmosphere. If you're passionate about precision welding and want to grow your skills on diverse, challenging projects, you'll fit right in! What You'll Do Perform TIG welding (primary) and MIG welding (secondary) on stainless steel (up to 18 ga) and mild steel components Read and interpret blueprints, shop drawings, and weld symbols to fabricate parts and assemblies (frameworks, tanks, ovens, handrails, etc.) Set up, operate, and maintain welding equipment and ancillary tools Conduct weld‑test samples and ensure each weld meets our strict quality and safety standards Troubleshoot joints, fit‑ups, and material defects for optimal weld integrity Collaborate with engineers and fabricators to improve processes, fixturing, and workflow Maintain a clean, organized work area and follow all company safety protocols Requirements What We're Looking For Experience: 3-5 years of hands‑on TIG welding experience in a production or custom‑fabrication environment MIG welding experience is a plus but not required Technical Skills: Blueprint/shop‑drawing literacy and strong attention to welding symbols Proven ability to produce clean, uniform beads on stainless steel (18 ga and thicker) Competence in setting proper amperage, travel speed, and shielding gas flow Personal Attributes: Self‑motivated, reliable, and able to complete tasks independently Strong hand‑eye coordination and visual acuity Physical stamina to lift up to 50 lbs regularly, and perform bending, kneeling, and climbing Commitment to safety, punctuality, and quality Benefits Competitive pay, based on experience Health, dental, and vision insurance options Paid time off and holiday pay Retirement Plan with company match Opportunities for professional development and cross‑training Modern, state‑of‑the‑art equipment and tooling

Full-time Description Job Title: Fabricator/General Maintenance Reports To: Department Supervisor FLSA Status: Hourly Non-Exempt 2nd Shift Hours: 3:00pm-11:30pm Overtime required based on production need. Pay: $23.50/hour GUARANTEED $0.50 RAISE AFTER 90 DAYS. Summary Fabricates and assembles structural metal products such as framework or shells for machinery and metal parts by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. Designs and constructs templates and fixtures. Locates and marks bending and cutting lines onto workpiece. Sets up and operates fabricating machines such as brakes, rolls, shears, flame cutters, and drill presses. Hammers, chips, and grinds workpiece to cut, bend, and straighten metal. Preheats workpieces. Positions, aligns, fits, and welds together parts. Verifies conformance of workpiece to specifications. Fabricates and assembles sheet metal products. Completes General Maintenance duties. Competencies To perform the job successfully, an individual should demonstrate the following competencies: Problem Solving - Identifies and resolves problems in a timely manner. Written Communication - Writes clearly and informatively; Able to read and interpret written information. Organizational Support - Follows policies and procedures. Quality - Demonstrates accuracy and thoroughness. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity. Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Adaptability - Adapts to changes in the work environment; Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Ability to maintain regular and punctual attendance. Dependability - Follows instructions, responds to management direction; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. Initiative - Asks for and offers help when needed. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to wet, humid, hot and/or cold conditions and moving mechanical parts. The employee is frequently exposed to fumes or airborne particles; toxic or caustic chemicals and vibration. The employee is occasionally exposed to high, precarious places and outside weather conditions. The noise level in the work environment is usually loud. Requirements Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills To perform this job successfully, an individual should have basic knowledge of computers and the ability to input data into a computer. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to physically perform the following: Lift 50 pounds 15 times during the shift Stand and/or walk for the duration of the shift Use hands to finger, grip, handle, or feel and reach with hands and arms Talk and hear Occasionally required to climb or balance and stoop, kneel, crouch, or crawl Close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus

Come be an Employee-Owner of one of the nation's largest producers of metal roofing and siding! We sell, manufacture, build, and distribute metal building components and packages. Since 1988 we've grown to over 13 locations nationwide. We make raving fans of our customers with our “right, on time, every time” commitment. So, who are we looking for? People who “Own It” - Commitment to the customer, the company, and each other: You are customer-focused with an eye for detail. You are reliable. People who “Can Do” - Our Attitude: You are an innovative thinker pursuing continuous improvement. You embrace teamwork. You want to positively make an impact and open to change. People who “Act in Love” - Treats others with humility, respect, kindness, honesty, patience, and self-control. You enjoy giving back to your community. We take great pride in the communities we live in, so we give back with our time and talents. Each year you can take paid time off to support a cause close to your heart. And what will you do? Summary: The Robotic Welder Operator sets up, operates, and maintains robotic welding equipment. This position is responsible for robot designing/programming, welding robots, maintaining and troubleshooting, and implementing robotic welding for production. Provides “Right. On Time. Every Time.” products and customer service, both to external and internal customers, within company standards. Core Functions: Follows all plant safety procedures and uses all applicable personal protective equipment (PPE). Holds other team members accountable for following all safety procedures, environmental control, process control and quality control practices. Follows all setup procedures and work instructions as documented in the Operations System. Reports all machinery issues to Maintenance promptly. Cleans and resets work area at the end of each shift, including but not limited to sweeping the floor, placing items in the proper storage area, stacking pallets, restocking packaging, and dumping trash. Accurately updates all records and visual tracking, whether written or electronic. Cross-trains as directed and is willing to work at any production position in the plant, on a as needed basis. Completes work as directed by plant management. Uses/Operates hand and power tools common to the welding trade, such as welding machine power sources, wire feeders, welding guns, air carbon arc gouging, oxy-fuel equipment, plasma cutters, angle grinders, needle guns, plate clamps, etc. Interprets engineering shop fabrication drawings, fabrication standards, sketches and other specifications to plan layout, assembly and welding operations. Inspects subassemblies and accessories visually and dimensionally to verify these meet the required specifications. Uses tape measures, squares, protractors, rulers, and other measuring tools to lay-out, position and align accessories and subassemblies in preparation for the robotic welding process. Loads and offloads the robotic welding cell. Inspects weld applied in the robotic process and applies all required welds the robot couldn't apply. Uses the proper sequence of operations to execute assembly and welding of the parts as effective as possible, also to maintain/obtain the required geometry and to prevent distortion of weldments; when needed, uses jacks, turnbuckles, wedges and other tools to correct distortions. Prepares joints and applies weds as per applicable WPS and fabrication shop drawings. Cleans welds and adjacent areas removing spatter, slag, silicon islands as per welding code, applicable standards and customer specifications. Visually inspects welds to ensure compliance with shop fabrication drawing and acceptance criteria in applicable welding codes. Marks or tag material with proper job number, piece marks, and other identifying marks. Lift or move materials and finished products, manually or with hoists or cranes. Duties, responsibilities, and activities are not limited to the list above and may change at any time with or without notice. Key Measures of Success: Be detailed and customer oriented. Ability to operate assigned task and cross-train in at least two additional work tasks. Demonstrates excellent interpersonal and teamwork skills. Customer and detailed oriented. Exhibits a continuous improvement mindset with ability to verbalize ideas for process and workflow improvements. Ability to use/read common measuring tools in the welding trade such as tape measures, squares, protractors, fillet weld gauges, v-wac gauges, cam-bridge gauges, do basic mathematical calculations, and use a calculator. Ability to interpret welding symbols. Ability to learn production operations. Consistently exhibits and displays the company's values of “Own It. Can Do. Act in Love.” Own It - Commitment to customer, company, and each other. Can Do - Team Player, Open to Change, & Pursuing continuous improvement. Act in Love - Treating others with humility, respectfulness, kindness, honesty, patience, and self-control Education & Experience: Minimum Required: High School diploma 2 Years of welding experience Welder Qualification (will need to pass a qualification test as per AWS D1.1 for unlimited thickness in the 2G position). Certified Robotic Arc Welder Operator Current Certification on Crane and Forklift (if applicable) Physical Demands & Work Environment: This role involves working in environments that may be loud, non-temperature-controlled, and exposed to outdoor weather conditions. Employees frequently interact with machinery, moving objects, and vehicles. The employee is occasionally required to sit, climb, or crawl. This role requires the use of a Powered Air Purifying Respirator, PAPR. Key Physical Requirements: Regular activities: standing, walking, talking, hearing, and performing tasks requiring fine motor skills (e.g., reaching, pushing, pulling, grasping, kneeling, crouching, twisting, and bending). Occasional activities: sitting, climbing, crawling, and lifting items weighing up to 35-55 lbs. Reasonable accommodation may be made to enable individuals with disabilities to perform core functions. Travel: Ability to work at other facilities, weekends, other shifts and to be on call. Benefits Offered: At Central States, we are an ESOP. That means each one of our employees is an owner of the company and receives an allocation of stock every year. This allows all of our employees to share in the wealth and success of the company. We also offer: 401K Match Education assistance available - Up to $5,250 each year Profit-Sharing bonus or own it bonus Medical - 100% employer-paid coverage available Dental Vision Holiday pay Paid Time Off Employee Assistance Program providing Confidential Emotional Support, Work and Lifestyle Support, Legal Guidance, Financial Resources and Digital Support Care Guides to help employees navigate the complex healthcare system Life insurance - 1.5x annual salary - 100% employer paid Wellness Program - earn up to $1,200 annually when enrolling in a medical plan! Health Savings Accounts Flexible Spending Accounts Short-Term Disability Long-Term Disability - 100% employer paid Performance based merit increases SHINE program - Employee Financial Assistance and Dependent Scholarships! Central States Manufacturing, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Combo Bring your proven skills as a Combo to an organization where you will enjoy competitive pay, 100% company paid medical and dental, and 401(k) with up to 4% company match. Due to rapid growth, we are looking to grow our team. Join ARMI Contractors, one of the premier industrial contractors in Northwest Arkansas. Company Overview Founded in 2003, our family-owned business started operations specializing in process and utility piping work. Over the years, we've evolved and expanded into multiple business units, offering a comprehensive range of high-quality products and solutions nationwide. We now provide services in Process & Utility Piping, Process Equipment & Installation, Thermal Fluid, HVAC, Products & Parts, and serve as a Prime Contractor (a one stop shop for all our services). As a leader in the industry, we hold our team members to an elite standard by hiring the best of the best. ARMI's reputation for work safety, deadline realization, quality productions, and adhering to budget has proven our drive for excellence. As a family-owned business, we recognize the importance of reinvesting in our team members and giving back to our local community. Why you should join the ARMI Contracting Team: Competitive pay with opportunity for advancement - as the company grows, you can move up the ranks. We are a career driven company where there are very real and achievable advancement opportunities. Phenomenal Leadership & Innovative Technology - with over 150 years of combined industry experience, the company has been built on a strong foundation. We continuously invest by acquiring cutting edge technology and equipment. As a leader in the industry, we hold our team members to an elite standard by hiring the best of the best. Great Work Culture - Join a highly skilled team that works very well together because of the team-based mentality. Arkansas Business of the Year Finalist in 2020 | 2022 | 2024 Arkansas Money & Politics Diversity in the Workplace Award 2022 | 2023 Committed to Sustainability: 2021 Mayor's Environmental Stewardship Award | Green & Sustainable Business of the Year. Top 10 Best Places to Live in the U.S.: Fayetteville has been ranked in the top 10 “Best Places to Live” according to the U.S. News & World's Annual Reporting list for a consecutive 8 years in a row. Responsibilities Use TIG Processes to weld stainless/carbon steel piping and or structure for process/utility piping in food processing plants Perform installation of all components of piping systems Draw and interpret isometric drawings and prints Determining the required tools, materials, and welding procedures. Cut and thread pipe to specifications, using tools such as saws, cutting torches, pipe threaders and benders Assemble and secure pipes, tubes, fittings, and related equipment according to specifications Inspect, examine, and test installed systems and pipelines, using pressure gauge, hydrostatic testing, observation, or other methods Lay out full scale drawings of pipe systems, supports, and related equipment, following blueprints Assists with other welders and fitters as needed on job sites Cleans up jobsites after completion Requirements Trade school and/or 2+ years of TIG welding experience and drawing isometric drawings Ability to travel 100% of the time. Availability to work nights, holidays, and weekends as needed. Ability to lift 50+ lbs. OSHA 10, preferred. Possess a valid driver's license and clean driving record. Pre-employment drug screen and background check Benefits & Compensation: QualChoice Hospitalization Plan- premium paid for team member, Payroll deduction for dependents after 60 days Dental Coverage- premium paid for team member & dependents after 60 days STD, LTD, Accident, Critical and Life Insurance- payroll deducted after 60 days Vision Coverage- payroll deducted after 60 days 401K up to 4% match after 60 days Paid Vacation and Holidays Performance based quarterly incentives All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex, national origin, religion, age, genetic information, status as a military veteran, or any other characteristic protected by applicable law.

Come be an Employee-Owner of one of the nation's largest producers of metal roofing and siding! We sell, manufacture, build, and distribute metal building components and packages. Since 1988 we've grown to over 13 locations nationwide. We make raving fans of our customers with our "right, on time, every time" commitment. So, who are we looking for? People who "Own It" - Commitment to the customer, the company, and each other: You are customer-focused with an eye for detail. You are reliable. People who "Can Do" - Our Attitude: You are an innovative thinker pursuing continuous improvement. You embrace teamwork. You want to positively make an impact and open to change. People who "Act in Love" - Treats others with humility, respect, kindness, honesty, patience, and self-control. You enjoy giving back to your community. We take great pride in the communities we live in, so we give back with our time and talents. Each year you can take paid time off to support a cause close to your heart. And what will you do? Summary: The Robotic Welder Operator sets up, operates, and maintains robotic welding equipment. This position is responsible for robot designing/programming, welding robots, maintaining and troubleshooting, and implementing robotic welding for production. Provides "Right. On Time. Every Time." products and customer service, both to external and internal customers, within company standards. Core Functions: * Follows all plant safety procedures and uses all applicable personal protective equipment (PPE). Holds other team members accountable for following all safety procedures, environmental control, process control and quality control practices. * Follows all setup procedures and work instructions as documented in the Operations System. * Reports all machinery issues to Maintenance promptly. * Cleans and resets work area at the end of each shift, including but not limited to sweeping the floor, placing items in the proper storage area, stacking pallets, restocking packaging, and dumping trash. * Accurately updates all records and visual tracking, whether written or electronic. * Cross-trains as directed and is willing to work at any production position in the plant, on a as needed basis. * Completes work as directed by plant management. * Uses/Operates hand and power tools common to the welding trade, such as welding machine power sources, wire feeders, welding guns, air carbon arc gouging, oxy-fuel equipment, plasma cutters, angle grinders, needle guns, plate clamps, etc. * Interprets engineering shop fabrication drawings, fabrication standards, sketches and other specifications to plan layout, assembly and welding operations. * Inspects subassemblies and accessories visually and dimensionally to verify these meet the required specifications. * Uses tape measures, squares, protractors, rulers, and other measuring tools to lay-out, position and align accessories and subassemblies in preparation for the robotic welding process. * Loads and offloads the robotic welding cell. * Inspects weld applied in the robotic process and applies all required welds the robot couldn't apply. * Uses the proper sequence of operations to execute assembly and welding of the parts as effective as possible, also to maintain/obtain the required geometry and to prevent distortion of weldments; when needed, uses jacks, turnbuckles, wedges and other tools to correct distortions. * Prepares joints and applies weds as per applicable WPS and fabrication shop drawings. * Cleans welds and adjacent areas removing spatter, slag, silicon islands as per welding code, applicable standards and customer specifications. * Visually inspects welds to ensure compliance with shop fabrication drawing and acceptance criteria in applicable welding codes. * Marks or tag material with proper job number, piece marks, and other identifying marks. * Lift or move materials and finished products, manually or with hoists or cranes. Duties, responsibilities, and activities are not limited to the list above and may change at any time with or without notice. Key Measures of Success: * Be detailed and customer oriented. * Ability to operate assigned task and cross-train in at least two additional work tasks. * Demonstrates excellent interpersonal and teamwork skills. * Customer and detailed oriented. * Exhibits a continuous improvement mindset with ability to verbalize ideas for process and workflow improvements. * Ability to use/read common measuring tools in the welding trade such as tape measures, squares, protractors, fillet weld gauges, v-wac gauges, cam-bridge gauges, do basic mathematical calculations, and use a calculator. * Ability to interpret welding symbols. * Ability to learn production operations. * Consistently exhibits and displays the company's values of "Own It. Can Do. Act in Love." * Own It - Commitment to customer, company, and each other. * Can Do - Team Player, Open to Change, & Pursuing continuous improvement. * Act in Love - Treating others with humility, respectfulness, kindness, honesty, patience, and self-control Education & Experience: Minimum Required: * High School diploma * 2 Years of welding experience * Welder Qualification (will need to pass a qualification test as per AWS D1.1 for unlimited thickness in the 2G position). * Certified Robotic Arc Welder Operator * Current Certification on Crane and Forklift (if applicable) Physical Demands & Work Environment: This role involves working in environments that may be loud, non-temperature-controlled, and exposed to outdoor weather conditions. Employees frequently interact with machinery, moving objects, and vehicles. The employee is occasionally required to sit, climb, or crawl. This role requires the use of a Powered Air Purifying Respirator, PAPR. Key Physical Requirements: * Regular activities: standing, walking, talking, hearing, and performing tasks requiring fine motor skills (e.g., reaching, pushing, pulling, grasping, kneeling, crouching, twisting, and bending). * Occasional activities: sitting, climbing, crawling, and lifting items weighing up to 35-55 lbs. Reasonable accommodation may be made to enable individuals with disabilities to perform core functions. Travel: Ability to work at other facilities, weekends, other shifts and to be on call. Benefits Offered: At Central States, we are an ESOP. That means each one of our employees is an owner of the company and receives an allocation of stock every year. This allows all of our employees to share in the wealth and success of the company. We also offer: * 401K Match * Education assistance available - Up to $5,250 each year * Profit-Sharing bonus or own it bonus * Medical - 100% employer-paid coverage available * Dental * Vision * Holiday pay * Paid Time Off * Employee Assistance Program providing Confidential Emotional Support, Work and Lifestyle Support, Legal Guidance, Financial Resources and Digital Support * Care Guides to help employees navigate the complex healthcare system * Life insurance - 1.5x annual salary - 100% employer paid * Wellness Program - earn up to $1,200 annually when enrolling in a medical plan! * Health Savings Accounts * Flexible Spending Accounts * Short-Term Disability * Long-Term Disability - 100% employer paid * Performance based merit increases * SHINE program - Employee Financial Assistance and Dependent Scholarships! Central States Manufacturing, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Why Us? With a mantra of Empowering Human Potential, Hanger, Inc. is the world's premier provider of orthotic and prosthetic (O&P) services and products, offering the most advanced O&P solutions, clinically differentiated programs and unsurpassed customer service. Hanger's Patient Care segment is the largest owner and operator of O&P patient care clinics nationwide. Through its Products & Services segment, Hanger distributes branded and private label O&P devices, products and components, and provides rehabilitative solutions to the broader market. With 160 years of clinical excellence and innovation, Hanger's vision is to lead the orthotic and prosthetic markets by providing superior patient care, outcomes, services and value. Collectively, Hanger employees touch thousands of lives each day, helping people achieve new levels of mobility and freedom. Could This Be For You? This exciting opportunity will give you the chance to work first hand in fabricating a variety of orthotics and prosthetic devices. You will work closely with the Clinician and patients to help adjust and repair the devices by fabricating orthoses and their components. This work environment will be away from the exam room, typically in a small workshop. Since this role is focusing heavily on the fabrication process, hand skills and familiarity with hand tools is necessary. The ideal candidate will have experience with band saws, drill presses, vacuum systems, heat guns, blades, speed routers, and other small hand tools. Your Impact Use appropriate hand tools to perform fabrication and repair of orthotic and/or prosthetic devices, Perform ordering and receiving and other inventory tasks as assigned. May fit and deliver prefabricated and off-the-shelf orthoses such as cervical orthoses, pressure gradient hose, and trusses. Provide education to patients on the application, use, care, and expected outcome for DME products as indicated by the physician instructions and manufacturer recommendations Contact vendors to order orthotic fabrication materials and maintain inventory of items used during fabrication process. Minimum Qualifications High school diploma or GED required. A valid driver's license and driving record within the standards outlined within Hanger's Motor Vehicle Safety Policy and Procedures. Technical training school or 2 years experience preferred. Additional Success Factors Knowledge and hand skills needed to fabricate and repair prostheses (artificial limbs) and orthoses (orthopedic braces) according to patient measurements, casts and in compliance with a physician's prescription Mechanical ability and hand-eye coordination to use laboratory tools safely and effectively. Effective organizational, time management and planning skills. Good interpersonal and verbal skills for communicating with others. Ability to work effectively as a team member. Act with integrity in all ways and at all times, remaining honest, transparent, and respectful in all relationships. Keep the patient at the center of everything that you do, building lifelong trust. Foster open collaboration and constructive dialogue with everyone around you. Continuously innovate new solutions, influencing and responding to change. Focus on superior outcomes, and calibrate work processes for outstanding results. Our Investment in You Competitive Compensation Packages 8 Paid National Holidays & 4 additional Floating Holidays PTO that includes Vacation and Sick time Medical, Dental, and Vision Benefits 401k Savings and Retirement Plan Paid Parental Bonding Leave for New Parents Flexible Work Schedules and Part-time Opportunities Generous Employee Referral Bonus Program Mentorship Programs- Mentor and Mentee Student Loan Repayment Assistance by Location Relocation Assistance Regional & National traveling CPO/CO/CP opportunities Volunteering for Local and National events such as Hanger's BAKA Bootcamp and EmpowerFest Hanger, Inc. is committed to providing equal employment opportunity in all aspects of the employer-employee relationship. All conditions and privileges of employment are administered to all employees without discrimination or harassment because of race, religious creed, color, age, sex, sexual orientation, gender identity, national origin, religion, marital status, medical condition, physical or mental disability, military service, pregnancy, childbirth and related medical conditions, special disabled veteran status, or any other classification protected by federal, state, and local laws and ordinances. The company will comply with all applicable state or local fair employment laws that forbid discrimination or harassment on the basis of other protected characteristics. Retaliation against any employee for filing or supporting a complaint of discrimination or harassment is prohibited. #ERF-HPO

Job Description: Welder Fabricator Primary Duty: The Welder Fabricator's main function is to cut, punch, and drill parts according to the print and then weld them together. Supervision: Supervision is by the Shop Manager. Essential Duties and Responsibilities: Reads a tape measure. Ability to interpret shop drawings. Cuts, punches, and drills material precisely. Keeps work area clean. Lifts heavy objects. Operates a forklift and overhead crane. Setup, run, and maintain welder machine. Able to operate various hand tools. Works with Fabricator to determine what parts are needed and when. Follows directions. Performs other duties, as required by the company. Other Important Functions: Attends workshops, seminars, and conferences for professional development as necessary. Attends and/or participates in company training. Interacts well with all levels of staff and management. Performs related administrative work as required. Travel: Work does not involve significant out of town travel. Technical Experience: Experience working in a production environment is helpful. Welding experience and certification is preferred. Required Education and Certifications: Position requires a High School Diploma or equivalent. Equivalent experience, education, and training may be considered as a diploma substitute. If operating a motor vehicle while on company business, job incumbents must possess current Motor Vehicle Operator's License and maintain proper personal insurance coverage.Must be forklift certified. Supervisory Responsibility: No supervisory responsibility for other employees. Company effectiveness depends upon a strong teamwork environment. Required Knowledge, Skills, Abilities, and Other Characteristics: Strong math and problem-solving skills. Ability to address situations as they arise and respond intuitively with accuracy and integrity. Continuous learning style and ability. Ability to present an overall professional image. Ability to communicate effectively in a friendly and efficient manner with vendors, employees, and other company contacts. Ability to effectively welcome and embrace differences among employees and vendors. Ability to perform the essential functions of the job without posing a direct threat to the health and safety of others. Must be able to clearly speak, read, and write in the English language. Knowledge of the different products produced by the company. Knowledge of materials used. Ability to identify any quality issues or defects in materials. Must be able to read and understand shop drawings. Must be able to operate a forklift. Physical Requirements and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions if no undue hardship is posed to the company. Physical Requirements Percentage of Work Time Spent on Activity 0-24%25-49%50-74%75-100% Seeing: Must be able to see well enough to see computer screens and read documents and measurements. Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust focus. Must have 20/20 vision (with or without correction). X Hearing: Must be able to hear well enough to communicate with vendors, customers, and other employees. X Sitting: Must be able to stand for extended periods of time. X Standing/Walking: Must be able to move about production floor. X Climbing/Stooping/Kneeling: Must be able to stoop or kneel to pick up products and construction materials. X Lifting/Pulling/Pushing: Lifts, pulls, pushes, sorts, and carries supplies and equipment up to 75 lbs. X Grasping/Feeling: Must be able to grasp and use construction equipment and power tools. X Work Environment Primary work location is a warehouse/production facility. Work is generally performed between 6:00 and 4:30. The noise level in the work environment is usually moderately high due to the operation of power tools and other machinery. The statements herein are intended to describe the general nature and level of work being performed, but are not to be seen as a complete list of responsibilities, duties, and skills required of personnel. Also, they do not establish a contract for employment and are subject to change at the discretion of the employer.

Job Description The Welder is responsible for permanently fitting and welding of various metals to include but not limited to; steel, aluminum, and stainless steel parts using high heat application to form a permanent bond. May specialize in one of hundreds of different processes of welding to join metals together. Certification may be required depending of job specifications. ESSENTIAL DUTIES Read blueprints and drawings and take or read measurements to plan layout and procedures Be proficient in MIG (GMAW), TIG (GTAW), and Stick (SMAW) as required Determine the appropriate welding equipment or method based on requirements Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) Operate angle grinders to prepare the parts that must be welded Align components using calipers, rulers etc. and clamp pieces Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead) Repair machinery and other components by welding pieces and filling gaps Test and inspect welded surfaces and structure to discover flaws Maintain equipment in a condition that does not compromise safety Determine welding position and type of metal to be fused Ensure welds meet standards and specifications Supervise machines or robots that perform automated welding tasks Operate heavy equipment and machinery in the performance of these essential duties Work with and around hazardous materials, as well as at heights and in confined spaces in the performance of these essential duties Drive a vehicle to various jobsites throughout working hours a. Maintain valid driver's license and a driving record that meets company policy Work in a constant state of alertness and in a safe manner Regular attendance and punctuality are essential for employee job performance Perform other duties as assigned ENVIRONMENT, PHYSICAL AND MENTAL REQUIREMENTS Exposure to varying indoor and outdoor conditions, loud noise, dust, toxic chemicals and materials, varying fumes or odors; slippery or uneven walking surfaces; and work in ditches/excavations Work at heights, such as by working on ladders, scaffolds, platforms, tops of single and multi-story buildings, as well as working in confined spaces such as underneath single story and multi-story building Must be able to perform manual and repetitive tasks and body movements including standing and/or walking for long periods of time, bending, reaching, and/or gripping frequently, climbing, pulling and pushing Must be able to lift up to 125lbs May lift and carry heavy objects, stoop, kneel, crouch, or crawl in awkward positions Must be able to complete job duties proficiently while adapting to changing demands and priorities Must have the ability to work in a constant state of alertness and concentrate for long periods of time to perform duties in a safe manner This position is subject to ergonomic testing SAFETY SENSITIVE This position is designated as a safety sensitive position because it includes as part of the job duties operating a motor vehicle, operating, maintaining, monitoring of heavy equipment and machinery, and working with and around hazardous materials, at heights, and in confined spaces. This position is one in which a lapse of attention could result in injury, illness, or death. For the safety of the employee and others, the employee must be able to work in a constant state of alertness and concentrate for long periods of time while operating, maintaining, and monitoring heavy equipment and machinery, and while working with and around hazardous materials, at heights, and in confined spaces. SKILLS AND COMPETENCIES High school diploma or general education degree (GED) preferred Minimum 1 year of experience or schooling is preferred Welders certification may be required depending of job specifications Knowledge of welding, structural brake forming and other fabrication processes along with automated welding techniques Ability to communicate clearly with other employees All employees must provide and maintain the required tool inventory for this position Good organizational and time-management skills Ability to complete daily tasks with limited supervision and minimal errors requiring re-work Ability and willingness to work overtime and non-standard schedule: nights, weekends and holidays as/if required A current valid driver's license is required BENEFITS MCC offers a comprehensive benefits package to include some of the following: Medical, Dental, Vision Basic and Optional Life Insurance, Accidental Death & Disability 401k Retirement Paid Time Off Paid Holidays Wellness Programs Education Assistance

Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Rogers, AR. Most positions are first shift with a pay scale of $18-$22/hour based on experience & skill level. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: MIG, TIG, Stick & Structural Welding Air Arc Repair Welding Pipe & Mechanical Flat/Vertical Carbon Steel Requirements: Basic Tools for the Trade Proper PPE must be worn: Have your own Hood and Gloves/Leathers Company Details Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: Vacation Pay Health insurance 401(k) profit-sharing savings plan Incentive programs Tool purchase programs & MORE! Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen's full website. Recruiter Name Monica Segovia Location US-AR-ROGERS

Salary: WELDER Job Responsibilities: Repair factory equipment and other industrial machinery, such as conveying systems, production machinery, screens, motors, and crushers. Maintains safe and clean working environment by complying with procedures, rules, and regulations. Contributes to team effort by accomplishing related results as needed. Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service. Performwelding and fabricationskills. Comply with safety regulations and maintain clean and orderly work areas. For consideration for this position, apply online: ************************************** Job Type: Full-time Required experience: Maintenance: 1 year WELDER City: Gravette Quarry at Sulphur Springs - State: Arkansas Part of the privately-owned Kemp Quarries group of companies, is a leading producer and supplier of construction aggregates, consisting primarily of crushed stone, sand and gravel spanning NE Oklahoma, SW Missouri and NW Arkansas. Job Description Summary Adhere to and follow all safety rules and regulations of MSHA / DOT and company. Conduct daily safety and equipment inspections. Welding and fabrication Communicate with shop regarding all repairs. Other duties as assigned. Qualifications Must pass a drug screen and criminal background check. Welding certificate required. Must maintain a safe driving record and have a valid drivers license. CDL beneficial. Flexibility to work various schedules, primarily day shift, may travel to various work locations. Must be reliable and hard-working. Ability to operate varied types of heavy equipment. May be required to complete DOT physical or MSHA certification. This job has no supervisory responsibilities. Presents numerical data effectively. Able to read and interpret written information. Education High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience. Required Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and write routine reports and correspondence. Ability to add, subtract, multiply, and divide in all units of measure. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Priorities and plans work activities; Uses time efficiently. Accepts responsibility for own actions. Follows through on commitments. Demonstrates accuracy and thoroughness in completing work. Monitors own work to ensure quality Strives to complete work in timely manner. Treats others with respect and consideration. Experience Three (3) years previouswelding experience with heavy equipment and/or rock crushing equipment. Majority of experience in public works, crushing and/or construction industry, heavy equipmentor maintenance facilities. Remove and install parts, disassemble and assemble components, and test and adjust assemblies with minimal supervision. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually moderate. The Benefits to You A culture that values and provides loyalty and commitment Competitive pay Comprehensive medical, dental, vision and short term disability programs 401(K) with company match Vacation

Job Description Why Join Us? L&L Metal Fabrication is a rapidly growing, family‑owned custom metal shop serving clients across Arkansas and beyond. We pride ourselves on quality craftsmanship, hands‑on mentorship, and a supportive team atmosphere. If you're passionate about precision welding and want to grow your skills on diverse, challenging projects, you'll fit right in! What You'll Do Perform TIG welding (primary) and MIG welding (secondary) on stainless steel (up to 18 ga) and mild steel components Read and interpret blueprints, shop drawings, and weld symbols to fabricate parts and assemblies (frameworks, tanks, ovens, handrails, etc.) Set up, operate, and maintain welding equipment and ancillary tools Conduct weld‑test samples and ensure each weld meets our strict quality and safety standards Troubleshoot joints, fit‑ups, and material defects for optimal weld integrity Collaborate with engineers and fabricators to improve processes, fixturing, and workflow Maintain a clean, organized work area and follow all company safety protocols Requirements What We're Looking For Experience: 3-5 years of hands‑on TIG welding experience in a production or custom‑fabrication environment MIG welding experience is a plus but not required Technical Skills: Blueprint/shop‑drawing literacy and strong attention to welding symbols Proven ability to produce clean, uniform beads on stainless steel (18 ga and thicker) Competence in setting proper amperage, travel speed, and shielding gas flow Personal Attributes: Self‑motivated, reliable, and able to complete tasks independently Strong hand‑eye coordination and visual acuity Physical stamina to lift up to 50 lbs regularly, and perform bending, kneeling, and climbing Commitment to safety, punctuality, and quality Benefits Competitive pay, based on experience Health, dental, and vision insurance options Paid time off and holiday pay Retirement Plan with company match Opportunities for professional development and cross‑training Modern, state‑of‑the‑art equipment and tooling

Job DescriptionDescription: Job Title: Fabricator/General Maintenance Reports To: Department Supervisor FLSA Status: Hourly Non-Exempt 2nd Shift Hours: 3:00pm-11:30pm Overtime required based on production need. Pay: $23.50/hour GUARANTEED $0.50 RAISE AFTER 90 DAYS. Summary Fabricates and assembles structural metal products such as framework or shells for machinery and metal parts by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. Designs and constructs templates and fixtures. Locates and marks bending and cutting lines onto workpiece. Sets up and operates fabricating machines such as brakes, rolls, shears, flame cutters, and drill presses. Hammers, chips, and grinds workpiece to cut, bend, and straighten metal. Preheats workpieces. Positions, aligns, fits, and welds together parts. Verifies conformance of workpiece to specifications. Fabricates and assembles sheet metal products. Completes General Maintenance duties. Competencies To perform the job successfully, an individual should demonstrate the following competencies: Problem Solving - Identifies and resolves problems in a timely manner. Written Communication - Writes clearly and informatively; Able to read and interpret written information. Organizational Support - Follows policies and procedures. Quality - Demonstrates accuracy and thoroughness. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity. Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Adaptability - Adapts to changes in the work environment; Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Ability to maintain regular and punctual attendance. Dependability - Follows instructions, responds to management direction; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. Initiative - Asks for and offers help when needed. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to wet, humid, hot and/or cold conditions and moving mechanical parts. The employee is frequently exposed to fumes or airborne particles; toxic or caustic chemicals and vibration. The employee is occasionally exposed to high, precarious places and outside weather conditions. The noise level in the work environment is usually loud. Requirements: Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills To perform this job successfully, an individual should have basic knowledge of computers and the ability to input data into a computer. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to physically perform the following: Lift 50 pounds 15 times during the shift Stand and/or walk for the duration of the shift Use hands to finger, grip, handle, or feel and reach with hands and arms Talk and hear Occasionally required to climb or balance and stoop, kneel, crouch, or crawl Close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus

Are you ready to be a part of something great? Industrial Equipment Services offers a broad range of services that includes not only fabrication and welding but maintenance and installation. We are seeking a qualified Welder/ Fabricator who is looking for a rewarding career. The position is responsible for operating welding equipment, measuring the dimensions of products and workpieces, and assembling workpieces to ensure proper assembly. By maintaining attention to detail and a high level of motivation, the Welder/ Fabricator will analyze diagrams and cut metal by operating the welding torch. By adhering to the job site and shop safety requirements, the position will operate equipment safely and maintain safe work habits. Three years of TIG stainless steel welding and fabrication experience is required. The Welder/ Fabricator must be available to work on the weekends. Industrial Equipment Services offers a full benefits package including health insurance, dental and vision plans, prescription drug plans, Aflac, 401K, vacation and holiday pay. If you enjoy ensuring accuracy in the welding and fabrication process, then this position is the perfect fit for you! Must be able to pass a pre-employment drug screening.

Job Description: Welder Fabricator Primary Duty: The Welder Fabricator's main function is to cut, punch, and drill parts according to the print and then weld them together. Supervision: Supervision is by the Shop Manager. Essential Duties and Responsibilities: Reads a tape measure. Ability to interpret shop drawings. Cuts, punches, and drills material precisely. Keeps work area clean. Lifts heavy objects. Operates a forklift and overhead crane. Setup, run, and maintain welder machine. Able to operate various hand tools. Works with Fabricator to determine what parts are needed and when. Follows directions. Performs other duties, as required by the company. Other Important Functions: Attends workshops, seminars, and conferences for professional development as necessary. Attends and/or participates in company training. Interacts well with all levels of staff and management. Performs related administrative work as required. Travel: Work does not involve significant out of town travel. Technical Experience: Experience working in a production environment is helpful. Welding experience and certification is preferred. Required Education and Certifications: Position requires a High School Diploma or equivalent. Equivalent experience, education, and training may be considered as a diploma substitute. If operating a motor vehicle while on company business, job incumbents must possess current Motor Vehicle Operator's License and maintain proper personal insurance coverage.Must be forklift certified. Supervisory Responsibility: No supervisory responsibility for other employees. Company effectiveness depends upon a strong teamwork environment. Required Knowledge, Skills, Abilities, and Other Characteristics: Strong math and problem-solving skills. Ability to address situations as they arise and respond intuitively with accuracy and integrity. Continuous learning style and ability. Ability to present an overall professional image. Ability to communicate effectively in a friendly and efficient manner with vendors, employees, and other company contacts. Ability to effectively welcome and embrace differences among employees and vendors. Ability to perform the essential functions of the job without posing a direct threat to the health and safety of others. Must be able to clearly speak, read, and write in the English language. Knowledge of the different products produced by the company. Knowledge of materials used. Ability to identify any quality issues or defects in materials. Must be able to read and understand shop drawings. Must be able to operate a forklift. Physical Requirements and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions if no undue hardship is posed to the company. Physical Requirements Percentage of Work Time Spent on Activity 0-24%25-49%50-74%75-100% Seeing: Must be able to see well enough to see computer screens and read documents and measurements. Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust focus. Must have 20/20 vision (with or without correction). X Hearing: Must be able to hear well enough to communicate with vendors, customers, and other employees. X Sitting: Must be able to stand for extended periods of time. X Standing/Walking: Must be able to move about production floor. X Climbing/Stooping/Kneeling: Must be able to stoop or kneel to pick up products and construction materials. X Lifting/Pulling/Pushing: Lifts, pulls, pushes, sorts, and carries supplies and equipment up to 75 lbs. X Grasping/Feeling: Must be able to grasp and use construction equipment and power tools. X Work Environment Primary work location is a warehouse/production facility. Work is generally performed between 6:00 and 4:30. The noise level in the work environment is usually moderately high due to the operation of power tools and other machinery. The statements herein are intended to describe the general nature and level of work being performed, but are not to be seen as a complete list of responsibilities, duties, and skills required of personnel. Also, they do not establish a contract for employment and are subject to change at the discretion of the employer.