Maintenance Technician jobs at Weyerhaeuser International, Inc - 392 jobs

Demonstrate full proficiency in maintenance/mechanical activities to ensure that all equipment is operating effectively and efficiently. Perform general maintenance, preventative maintenance, over-hauls, modification, fabrication, welding, and/or mechanical and electrical troubleshooting and repair. Work with a limited degree of supervision, with oversight focused on complex and/or new assignments. Act as an informal resource for colleagues with less experience. JOB DUTIES AND RESPONSIBILITIES * Perform maintenance and/or repairs (planned, unplanned, emergency) on production, processing, and packaging equipment as well as utility related equipment or systems, following all safety procedures * Perform preventative maintenance; perform routine inspections of equipment for assessment of reliability and performance * Read, analyze, and interpret technical procedures, electrical schematics, service manuals, and work orders to perform required maintenance and service * Support the installation of new equipment * Assist operators with training or troubleshooting to minimize equipment downtime * Complete work orders in a timely manner, while maintaining high quality standards * Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties * Maintain communication with other departments, management, and employees and notify them of any problems and/or concerns that may restrict the efficiency of production * Ensure all repairs are documented. Complete all paperwork clearly, legibly, and accurately with required information. Document all required information in accordance with standard operations procedures * Stay up to date on new products, equipment, technology and techniques * Utilizing continuous improvement mindset, assist in identifying opportunities to improve processes * Exhibit the ability to anticipate parts requirements for the tasks, follow proper purchasing procedures, and acquire parts ahead of anticipated task performance * Maintain safe working conditions for employees and compliance with all state and federal regulations regarding health and safety issues * Follow all DFA good manufacturing practices (GMP) and work in a manner consistent with all corporate regulatory, food safety, quality, and sanitation requirements * The requirements herein are intended to describe the general nature and level of work performed by employee, but is not a complete list of responsibilities, duties, and skills required. Other duties may be assigned as required Pay: $34.75 EDUCATION AND EXPERIENCE * High school diploma or equivalent * Graduation from trade school or technical school preferred in areas such as electrical, programmable controls (PLC/HMI), mechanical, welding/fabrication, refrigeration, plumbing, etc. * 2 to 4 years of maintenance, mechanical, electrical, hydraulic, pneumatic, electronic, computer-controlled equipment, PLC, and HVAC or related experience, preferably in a manufacturing environment * Experience on a variety of equipment including lubricating, cleaning, material handling, motor control, relay control, process control and packaging equipment * Experience with ammonia refrigeration systems preferred * Certification and/or License - may be required during course of employment KNOWLEDGE, SKILLS, AND ABILITIES * Knowledge of charts, tables, drawings, specifications, schedules, wiring diagrams * Able to inspect equipment, recognize potential problems, and take appropriate corrective action to prevent component failures or equipment down time * Able to use a variety of maintenance tools, hand and power tools, electric meters, and material handling equipment in a safe manner * Able to perform maintenance activities/repairs independently and assist on more complicated repairs * Able to perform minor to mid-sized projects from planning to installation * Able to present options and ideas to current processes or procedures * Able to adapt and manage to change effectively * Able to perform task and duties without constant supervision * Able to work effectively in a team environment * Able to diagnose and take appropriate steps to find solutions to problems * Able to communicate clearly and effectively, both verbally and in writing * Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals * Basic computer skills * Must be able to read, write and speak English An Equal Opportunity Employer including Disabled/Veterans Salary: $33.75 / Hour

MAINTENANCE TECHNICIAN GENERAL PURPOSE Demonstrate full proficiency in maintenance/mechanical activities to ensure that all equipment is operating effectively and efficiently. Perform general maintenance, preventative maintenance, over-hauls, modification, fabrication, welding, and/or mechanical and electrical troubleshooting and repair. Work with a limited degree of supervision, with oversight focused on complex and/or new assignments. Act as an informal resource for colleagues with less experience. JOB DUTIES AND RESPONSIBILITIES · Perform maintenance and/or repairs (planned, unplanned, emergency) on production, processing, and packaging equipment as well as utility related equipment or systems, following all safety procedures · Perform preventative maintenance; perform routine inspections of equipment for assessment of reliability and performance · Read, analyze, and interpret technical procedures, electrical schematics, service manuals, and work orders to perform required maintenance and service · Support the installation of new equipment · Assist operators with training or troubleshooting to minimize equipment downtime · Complete work orders in a timely manner, while maintaining high quality standards · Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties · Maintain communication with other departments, management, and employees and notify them of any problems and/or concerns that may restrict the efficiency of production · Ensure all repairs are documented. Complete all paperwork clearly, legibly, and accurately with required information. Document all required information in accordance with standard operations procedures · Stay up to date on new products, equipment, technology and techniques · Utilizing continuous improvement mindset, assist in identifying opportunities to improve processes · Exhibit the ability to anticipate parts requirements for the tasks, follow proper purchasing procedures, and acquire parts ahead of anticipated task performance · Maintain safe working conditions for employees and compliance with all state and federal regulations regarding health and safety issues · Follow all DFA good manufacturing practices (GMP) and work in a manner consistent with all corporate regulatory, food safety, quality, and sanitation requirements · The requirements herein are intended to describe the general nature and level of work performed by employee, but is not a complete list of responsibilities, duties, and skills required. Other duties may be assigned as required Pay: $34.75

Dairy Farmers of America is looking for highly dependable team playerto join our staff as MASTER MAINTENANCE UTILITIES TECHNICIAN at our Mechanicsburg, PA facility. Starting Rate: $40.00 per hour If you are fascinated by the process of industrial food & beverage manufacturing, are committed to supporting our reputation for excellent products, then this is the place for you. We are proud to offer you access to you wages on demand, no need to wait for pay day. Description: Provide complete electrical and mechanical maintenance support for the utilities systems in a high-speed bottling facility. Ensure that processing, filling, sterilizing, and packaging equipment are supplied with the necessary clean steam, water, compressed air, etc. Execute repair work orders and requests in a timely manner to ensure production needs are met. Perform the above tasks in a safe manner following safety and environmental regulations. Shift: Fulltime rotating 12-hour day shift (6am-6:30pm). Work three days one week, four days the next week. Off every other weekend. Job Duties and Responsibilities: * Maintain a 1,000 HP and two 800 HP boilers and back-up fuel oil system. * Maintain de-aerators, de-alkalizers, and water softeners * Maintain chemical feed systems for boiler water quality. * Conduct water quality tests for boiler water quality * Maintain and monitor four Trane chillers. * Maintain five evaporative cooling towers. * Conduct water quality tests for retort cooling water loop. * Maintain two Reverse Osmosis (RO) systems * Monitor utility's chemical inventory to include ordering chemicals when needed. * Maintain three large air compressors * Provide immediate assistance to downtime situations. * Trouble-shoot equipment malfunctions and make repairs accordingly. * Ensure all repairs are documented. * Foster teamwork consistent with our company and plant Mission, Vision, and Core Values * Follows all DFA GMP's, cleans work areas upon completing a project and works in a manner consistent with all corporate and regulatory, food safety, quality, and sanitation requirements. * Perform other tasks and jobs as necessary. Education and Experience § High School/GED, Technical/Military/College a plus. § Experience working with processing, bottling, canning, packaging equipment, or related field is preferred. § Minimum 3 years of skilled industrial maintenance experience. § Experience in plant utilities is strongly preferred. Knowledge, Skills, and Abilities * Knowledge of, and ability to troubleshoot electrical, mechanical, pneumatic, and hydraulic systems. * Experience with CMMS programs * Knowledge of Microsoft Office Suite and company computer system * Able to read, write, and speak English An Equal Opportunity Employer including Disabled/Veterans

Dairy Farmers of America is looking for highly dependable team player to join our staff as MASTER MAINTENANCE UTILITIES TECHNICIAN at our Mechanicsburg, PA facility. Starting Rate: $40.00 per hour If you are fascinated by the process of industrial food & beverage manufacturing, are committed to supporting our reputation for excellent products, then this is the place for you. We are proud to offer you access to you wages on demand, no need to wait for pay day. Description: Provide complete electrical and mechanical maintenance support for the utilities systems in a high-speed bottling facility. Ensure that processing, filling, sterilizing, and packaging equipment are supplied with the necessary clean steam, water, compressed air, etc. Execute repair work orders and requests in a timely manner to ensure production needs are met. Perform the above tasks in a safe manner following safety and environmental regulations. Shift: Fulltime rotating 12-hour day shift (6am-6:30pm). Work three days one week, four days the next week. Off every other weekend. Job Duties and Responsibilities: Maintain a 1,000 HP and two 800 HP boilers and back-up fuel oil system. Maintain de-aerators, de-alkalizers, and water softeners Maintain chemical feed systems for boiler water quality. Conduct water quality tests for boiler water quality Maintain and monitor four Trane chillers. Maintain five evaporative cooling towers. Conduct water quality tests for retort cooling water loop. Maintain two Reverse Osmosis (RO) systems Monitor utility's chemical inventory to include ordering chemicals when needed. Maintain three large air compressors Provide immediate assistance to downtime situations. Trouble-shoot equipment malfunctions and make repairs accordingly. Ensure all repairs are documented. Foster teamwork consistent with our company and plant Mission, Vision, and Core Values Follows all DFA GMP's, cleans work areas upon completing a project and works in a manner consistent with all corporate and regulatory, food safety, quality, and sanitation requirements. Perform other tasks and jobs as necessary.

We are seeking a skilled Maintenance Mechanic to join our dynamic team. The ideal candidate will possess a strong mechanical knowledge and be proficient in the installation, maintenance, and repair of industrial machinery and equipment. This role requires a commitment to safety and efficiency, with a focus on delivering exceptional service to our clients. Responsibilities * Install, maintain, and repair machinery and equipment in accordance with specifications. * Utilize tools such as ammeters, ohmmeters, voltmeters, and scissor lifts effectively. * Troubleshoot mechanical issues and perform necessary repairs to minimize downtime. * Fabricate components as needed to support machinery operations. * Provide excellent customer service by communicating effectively with clients regarding their equipment needs. * Collaborate with field service teams to ensure seamless operations across various job sites. * Maintain accurate records of work performed and materials used. Experience * Proven experience as a Maintenance Mechanic in a similar role within an industrial setting. * Familiarity with electrical systems; experience as an industrial electrician is a plus. * Strong mechanical aptitude with the ability to read blueprints and technical manuals. * Experience in technical sales is advantageous but not required. * Ability to work independently and as part of a team while demonstrating strong problem-solving skills. * A commitment to safety protocols and best practices in all aspects of work. Join us in this exciting opportunity where your skills will contribute significantly to our operations while ensuring the highest standards of service for our clients. Job Type: Full-time Benefits: * 401(k) * Dental insurance * Employee assistance program * Health insurance * Health savings account * Life insurance * Paid time off * Tuition reimbursement * Vision insurance

Job Description We are seeking a skilled Maintenance Mechanic to join our dynamic team. The ideal candidate will possess a strong mechanical knowledge and be proficient in the installation, maintenance, and repair of industrial machinery and equipment. This role requires a commitment to safety and efficiency, with a focus on delivering exceptional service to our clients. Responsibilities Install, maintain, and repair machinery and equipment in accordance with specifications. Utilize tools such as ammeters, ohmmeters, voltmeters, and scissor lifts effectively. Troubleshoot mechanical issues and perform necessary repairs to minimize downtime. Fabricate components as needed to support machinery operations. Provide excellent customer service by communicating effectively with clients regarding their equipment needs. Collaborate with field service teams to ensure seamless operations across various job sites. Maintain accurate records of work performed and materials used. Experience Proven experience as a Maintenance Mechanic in a similar role within an industrial setting. Familiarity with electrical systems; experience as an industrial electrician is a plus. Strong mechanical aptitude with the ability to read blueprints and technical manuals. Experience in technical sales is advantageous but not required. Ability to work independently and as part of a team while demonstrating strong problem-solving skills. A commitment to safety protocols and best practices in all aspects of work. Join us in this exciting opportunity where your skills will contribute significantly to our operations while ensuring the highest standards of service for our clients. Job Type: Full-time Benefits: 401(k) Dental insurance Employee assistance program Health insurance Health savings account Life insurance Paid time off Tuition reimbursement Vision insurance

Why us? You will be part of a team that believes that believes in employees success! They are a dynamic, fast growing company with great opportunities and an employee focused company culture. Join this fantastic team today and make a difference in your life and the lives of those around you! They are an equal opportunity employer and value diversity at our company. Job Description What after hire? Your Benefits : Medical Ins,Dental Ins,Vision Ins,Life Ins,Retirement Relocation : Up to $5,000 Salary: $45,000 - $75,000 Qualifications Why should we hire you? You hold a College degree in related field You have more than 3 years of Foundry experience with Green Sand You are good with Microsoft power-point and excel You can supervise the Dock Auditor, Final Inspectors and Scrap Investigators You are willing to work on special projects You can ensure hourly line inspections are being done and update the Grinding Process Cards as needed You can perform all duties requested by the Quality Manager Additional Information All your information will be kept confidential according to EEO guidelines.

The Neil Jones Food Company is an industry leader, processing superior quality fresh-packed, vine-ripened California tomatoes and Pacific Northwest fruit. Headquartered in Vancouver, Washington, NJFC has been providing our nation's discerning foodservice, retail, industrial and institutional customers with the finest quality canned and pouched products for over 50 years. NJFC operates three production facilities: Northwest Packing in Vancouver, WA.; San Benito Foods, in Hollister, CA; and Toma-Tek in Firebaugh, CA. We are looking for a Maintenance Mechanic Specialist to support our juice plant operations. This role will be responsible for troubleshooting, rebuilding and repairing the juice plant processing equipment, including filters system, decanters, evaporator, positive displacement and dynamic pumps at our Northwest Packing plant in Vancouver, WA. For additional information, please see our “About Us” video, Our Story - Neil Jones Food Company Key Responsibilities: Repair and rebuild hydraulic pumps and systems. Repair and rebuild pneumatic valve and systems. Perform regular preventive maintenance (PMs) on mechanical systems to minimize downtime. Work with flow charts to understand the juice operations systems. Inspect and replace gaskets, valves, pumps, and food-grade piping to ensure compliance with food safety and sanitation standards. Requirements: 3+ years' experience in industrial maintenance, preferably in food or beverage cannery. Strong mechanical aptitude with working knowledge of hydraulics, pneumatics, motors, and gearboxes. Proficiency in checking tolerances by using micrometers calipers and feeler gauges. Ability to read blueprints, flow charts, mechanical schematics, and research and understand information needed for completing the task. Ability to lift 50 lbs. and work in hot, humid, or wet environments. Ability to pass a pre-employment drug test, background check including employment and educational verification, credit screen, and to work extended schedule and weekends during the fresh pack season, typically July to early November. Compensation: The hourly union wage is $35.19. Benefits: Pension & Supplemental 401(k) Medical, Dental, & Vision coverage Company paid Life and AD&D insurance 10 paid vacation days, 10 paid holidays, and separate sick time Employee Assistance Program Numerous other voluntary products available Convenient location, 2 miles west of downtown Vancouver Free parking Applicants have rights under Federal Employment Laws Family and Medical Leave Act (FMLA) Equal Employment Opportunity (EEO) Employee Polygraph Protection Act (EPPA) The Neil Jones Food Company participates in E-Verify E-Verify Participation If You Have the Right to Work, Don't Let Anyone Take It Away We are an Equal Opportunity and Fair Chance Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, religion, sex, disability, age, citizenship status, genetic information, military or veteran status, and other protected status under applicable law. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Maintenance mechanics repair, program, inspect, troubleshoot, maintain and adjust equipment and machines to provide optimal performance Duties/Activities Required by Job Perform “preventive maintenance” (PM) checks during the week. This includes temperature checks and visual inspections of all equipment in your area of responsibility that has been identified. Ensures optimum operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and processing machinery. Document findings of weekday inspections on the PM route sheet for equipment so work can be scheduled accordingly. Order parts for your equipment Make sure that the parts room has the correct parts. Make a rebuild parts list for your equipment. You should know what type of motor, belt, etc. that your equipment needs in order to run efficiently. Before performing maintenance on machinery make sure that you have all required PPE, locks and correct parts needed. When removing parts from a piece of equipment, tag them or store them so they can't be lost and can be identified later for possible repair. Adjust process equipment/support system's devices and control instruments by using hand tools, levels, plumb bobs, lasers, and straightedges. Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. Fabricate and repair parts by using general machine shop, welding equipment, instrumentation, and equipment. Must be able to read a tape measure and be familiar with fine measurements' including the use calipers, micrometers, and gauges. Provides mechanical maintenance information by answering questions and requests. Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. Maintains safe and clean working environment by complying with procedures, rules, and regulations. Contributes to team effort by accomplishing related results as needed. After maintenance is complete on machinery, perform an operational check on the piece of equipment and ensure lockouts have been removed before leaving work areas. Educations/Experience Requirements Three years of maintenance experience within the industrial mechanical field preferred and poultry experience highly desirable. Associate's degree and certifications will be considered. Able to use manuals and measuring instruments to ensure optimum operation of machinery and mechanical equipment by completing preventive maintenance procedures for conveying systems, and process equipment/systems; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Locates sources of problems by observing mechanical devices in operation and listening for problem. Able to remove defective parts by disassembling equipment, using hoists, cranes, hand and power tools. Problem Sensitivity with the ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Need to be able to read/understand drawings i.e., exploded views, orthographic views and assembly drawings. Perform General Physical Activities requiring considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials. Able and willing to lift between 40 - 60lbs. Ability to stand for long periods of time. Ability to work in extreme cold/hot environments. Able to perform strenuous work in wet/damp environments. This position performs duties as assigned, leaving work area clean and organized. #UBDNC #LI-QR1

We are seeking a part-time facilities maintenance person to become a part of our friendly and passionate team! Your primary responsibilities will be to maintain our Metate Ranch tour and event spaces using hand and small power tools. You will also assist with set-up and clean up for weddings and corporate events at our outdoor event venues. General Landscape and Maintenance Responsibilities: Maintain our outdoor facilities in a tour and event ready condition at all times Daily general repair, maintenance, and clean-up of all ranch areas, equipment, and facilities using hand and small power tools (drills, saws, sanders, etc.). May include painting, sanding, digging, small construction projects (such as building picnic tables and benches or small temporary structures), repairing kishes and the long house, leveling and repairing walkways and foot paths, etc. Complete maintenance and repair work in a timely fashion Adhere to preventative maintenance schedules on all equipment Order and replace broken parts or equipment Clean and sanitize portable restrooms Operate and maintain generators, compressors, a UTV, compact tractor, and other work equipment and vehicles Maintain the wiring and lighting for our generator-powered lighting system Install and maintain irrigation pipes and drainage Assist with daily landscape upkeep including weeding, raking, watering, and trimming. Collect and remove trash. Clean out and maintain pumps for waterfalls, stream, and fountains. Clear reeds from ponds. Remove downed palm fronds from the oasis area. Remove and clear debris on roads and trails. Maintain dirt roads and trails - Drag and water the roads to keep them accessible by buses and other vehicles. Remove rocks from from roads and trails. Clear obstructions and repair dirt roads after rain and other weather events using a compact tractor. Maintain a clean and a safe work space - clean up and put away tools at the end of each shift Clean and maintain UTV and other work vehicles Event Set-Up and Clean-Up Responsibilities: Set-up for weddings and events - move and set-up picnic tables per the event order, wipe down all benches and tables, set out pillows, cushions, and game equipment. Put on tablecloths and set-out centerpieces. Set-up lighting. Set-out trash and recycling cans, Other preparation of the facilities as needed per the event order. Assist with the delivery and set-up of generators, portable bathrooms, heaters, and other rentals. Drag and water dirt roads for bus access. Clean-up after weddings and events - remove and store lighting, games, tables and benches, pillows and cushions, centerpieces and other décor. Empty and sort trash and recycling. Pick up cigarette butts, plastic utensils, and other trash from the ground. Rake and return facilities to tour ready condition. Other Responsibilities: General ranch security during work-hours Maintain accurate timekeeping records Perform other duties, as assigned Assist with tour vehicle break-downs - bring back-up vehicles to stranded tour groups, help move disabled vehicles down to the parking lot/paved road for towing to the mechanics Minimum Qualifications: Ability to read, write, speak and understand English fluently Ability to communicate professionally and respectfully to guests, vendors, and coworkers Previous experience in maintenance, landscape, or other related fields Familiarity with hand-held tools and equipment Deadline and detail-oriented Ability to work both independently and as part of a team Ability to exercise good common sense and judgement Ability to follow directions as well as think independently to solve problems Ability to work outdoors year round (in the summer we only work in the mornings) Ability to lift up to 100 pounds California driver's license and clean DMV record (no DUI's and no more than one ticket for a moving violation or accident in the last 2 years) Must have reliable transportation and insurance Must be reliable, dependable, trustworthy, have a good attitude, and strong work ethic Must be fully vaccinated for COVID (proof of vaccination required for employment) Must pass a pre-employment drug test and background check Flexible schedule Ability to work weekends and holidays Legal right to work in the US Desirable Qualifications: Jack-of-all-trades / handyman Carpentry skills Electrical and/or lighting background or experience General construction background or experience Landscape maintenance background or experience General automotive experience or knowledge Ability to be on-call Ability to work more hours as business needs dictate Ability to operate heavy equipment - skip loader, excavator, fork lift, etc. Metate Ranch is the primary tour and event location for Desert Adventures, consisting of about 800 acres of pristine, private property in the Indio Hills (off the north end of Monroe Street in Indio). Metate Ranch features include a natural palm oasis, winding canyons with unique geologic features, several picnic areas and outdoor event spaces, including the Enchanted Desert, our primary wedding and event venue. Visit us at **************** to learn more. This is a part-time (20-29 hours per week) position. Your schedule may vary from week to week, based on business demands, and may require working weekends, evenings, and/or holidays. Desert Adventures is an Equal Opportunity Employer and a Drug-Free Workplace. We offer 401K with company matching. Sick time accrual is provided in accordance with California law.

Maintenance Mechanic - New Recruitment Moses Lake, WA Do you want to work with a dynamic group of talented maintenance mechanics at a growing food production plant in a beautiful community? If you desire these additional qualities for a work life/balance - we want you! This position is accountable for the timely installation, preventative maintenance, troubleshooting and repair of complex plant equipment and facilities that are instrumental in the efficient functioning of automated production lines and a manufacturing facility operating on a 24 hour/day, 7 day/week operation. The incumbent is assigned jobs by the supervisor or a superintendent and is expected to complete most jobs, including those of a complex nature, with little supervision. All assignments must be carried out under stringent safety and sanitation standards. Quality requirements are constantly monitored, necessitating equipment fabrication and machine operations within specific tolerances and operational specifications to insure the delivery of food products on time and at the lowest cost by conforming exactly to the customer's requirements. Participation of employees in the implementation of improved concepts is encouraged in all production processes. Skills required include an intermediate level in proficiency in welding, plumbing, electrical repair, instrumentation, running lathes and milling machines, fabricating and repairing pneumatic and hydraulic systems. Additionally, the incumbent must own and maintain a basic set of hand tools. Must be willing to work day, swing, and graveyard shift. Some weekend work is required. Principle Accountabilities * Troubleshoot and perform repairs to equipment that has failed in a manner that minimizes downtime. * During process line downtime, perform corrective and preventative equipment maintenance per assigned schedule. * Fabricate, manufacture or assemble items as indicated on blue prints, sketches or schematics of complex objects and circuitry as requested in work orders. * Rebuild or remodel highly complex pieces of machinery such as gear boxes, motors, etc. * Maintain an appropriate inventory of parts on hand to facilitate timely repair of equipment. * Maintain an up-to-date understanding of the proper use of all repair equipment through an on-going training schedule. * May be assigned to perform specialized job functions eg: auto/forklift mechanic, construction electrician, instrumentation, refrigeration, machinist, electronic specialist etc. Although assigned to a specialized job, the incumbent will be expected to assist in areas outside of that specialty as the need arises. Understand safety regulations and procedures on all assignments. Must maintain the highest standards of ethics and integrity while embodying the tenets of "What We Stand For" and "The Basic Principles." Must maintain the highest standards of data management by creating consistent, reliable data which will ensure accuracy and in turn, maximize the use of data and confidence in decision making. Proactively manage safety by ensuring compliance with all Federal and State regulations and internal Company policies. Regularly complete behavior based safety observations. Ensure unsafe conditions are corrected in a timely manner. All employees are responsible for upholding the principles of SQF 2000. All employees are responsible for immediately reporting any food safety, food quality or plant security issues to management for appropriate action. Perform other duties as assigned. Qualifications: Education and/or Experience: This position requires the incumbent to have advanced skills as an industrial mechanic or industrial electrician. A two-year certificate from a college or technical school is preferred. Language Skills: Ability to read and comprehend simple to complex instructions, correspondence, and memos. Ability to write various types of documents including, but not limited to, instructions, training outlines, and reports. Ability to effectively present information verbally in one-on-one to large group situations. Reasoning Ability: Must be able to creatively apply experience and common sense to a variety of situations, processes, and people. Must be able to make technical decisions and support the staff on technical issues. Possess the ability to manage several projects concurrently. Be able to plan work, order parts, and coordinate downtime to complete work orders. Be able to resolve issues which may include conflicts between employees, equipment malfunctions, and variations in operating conditions. Computer Skills: Must demonstrate strong skills in Microsoft Office suite and be able to effectively use Maintenance Management Software. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and taste or smell. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision and color vision. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals and outside weather conditions. The employee is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually loud. At BAF, we are an equal-opportunity employer. We value diversity and strive to create a supportive and inclusive community of individuals committed to helping each other and our company thrive. All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, disability, religion, national origin, gender, gender identity, gender expression, marital status, sexual orientation, age, protected veteran status, or any other characteristic protected by law.

JOB TITLE: Maintenance Mechanic DEPARTMENT: Maintenance REPORTS TO: Maintenance Manager FLSA STATUS: Non-Exempt. SUPERVISORY ROLE (Y/N): N TRAVEL REQUIREMENT: None Pay Range: $21.93-$33.36 DOE +$2 Differential for Night Shift * Accountable for the timely installation, preventative maintenance, troubleshooting, and repair of complex plant equipment and facilities that are instrumental in the efficient functioning of automated production lines and a manufacturing facility operating on a 24 hour/day, 7 day/week operation. * The incumbent is assigned jobs by the supervisor and is expected to complete most jobs, including those of a complex nature, with little to no supervision ESSENTIAL JOB DUTIES/KEY ACCOUNTABILITIES * Perform preventive and corrective maintenance on production equipment, conveyors, pumps, motors, gearboxes, dryers, mixers, and packaging machinery. * Troubleshoot mechanical failures and equipment malfunctions in a timely and safe manner. * Fabricate, weld, or modify parts and components as needed. * Assist with equipment installation and commissioning of new machinery. * Perform preventive and predictive maintenance according to established schedules. * Maintain detailed maintenance and repair logs in ERP/CMMS (Computer Maintenance Management System). * Work collaboratively with electricians, operators, and supervisors to support production goals. * Ensure compliance with all codes, safety regulations, Lockout/Tagout (LOTO), and food safety standards. * Understand the basics of electricity. Wire 3 phase motors and basic trouble shooting. QUALIFICATIONS * Strong mechanical aptitude and hands-on experience with hydraulics, pneumatics, gearboxes, and drive systems. * Basic understanding of electrical systems and ability to assist with minor electrical troubleshooting. * Ability to read mechanical drawings, schematics, and manuals. Must own all basic tools to be used on the job. (Specialty tools will be provided). Preferred Qualifications * Welding and fabrication experience (TIG/MIG/Stick). EDUCATION AND EXPERIENCE * High school diploma or equivalent; technical or trade school certification preferred. KNOWLEDGE AND SKILLS * Preferred 3+ years of industrial maintenance experience, preferably in a food processing or manufacturing environment. WORK ENVIRONMENT/PHYSICAL DEMANDS * Physically able to lift 50 LBS, climb ladders, and work in confined spaces or elevated areas as needed. * Willingness to work flexible hours, including weekends or holidays, as production demands require. FOOD AND WORKPLACE SAFETY REQUIREMENTS Proactively manage safety by ensuring compliance with all Federal and State regulations and internal Company policies. Regularly complete behavior based safety observations. Ensure unsafe conditions are corrected in a timely manner. All employees are responsible for upholding the principles of SQF 2000. All employees are responsible for immediately reporting any food safety, food quality, or plant security issues to management for appropriate action. DISCLAIMER: Incumbent may be asked to perform other duties as required. At BAF, we are an equal-opportunity employer. We value diversity and strive to create a supportive and inclusive community of individuals committed to helping each other and our company thrive. All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, disability, religion, national origin, gender, gender identity, gender expression, marital status, sexual orientation, age, protected veteran status, or any other characteristic protected by law.

About the Role We are seeking a skilled Test Room Maintenance Engineer to join our team at Wistron in Fort Worth. This role is responsible for maintaining a stable and reliable AI GPU board testing environment for AI server systems. The engineer will ensure all AC/LC (Air Cooling / Liquid Cooling) systems operate effectively to provide a controlled and standardized environment that supports accurate and efficient testing. Key Responsibilities 1. Maintain and oversee AI GPU Board testing rooms, ensuring continuous operation and environmental stability. 2. Monitor and adjust AC/LC systems to maintain temperature, humidity, and airflow parameters within required specifications. 3. Conduct routine inspections, preventive maintenance, and troubleshooting of environmental control hardware. 4. Co-operate with test engineering teams by ensuring optimal cooling performance and test room readiness. 5. Diagnose and resolve system failures, alarms, and environmental deviations promptly. 6. Record maintenance activities and update documentation, logs, and reports. 7. Collaborate with facility teams, test engineers, and vendors to maintain high system uptime and reliability. Qualifications Education & Experience Education: Bachelor's degree in Mechanical Engineering, Electrical Engineering, HVAC Technology, Mechatronics, or any related technical field. Experience: Minimum 2 years of experience in a similar role, preferably within a testing, research, or manufacturing environment. Required Technical Skills Basic knowledge of HVAC concepts, including temperature control, airflow, and cooling fundamentals. Ability to perform simple equipment checks, read gauges/meters, and monitor environmental parameters. Basic understanding of AC/LC (Air Cooling / Liquid Cooling) systems or willingness to learn through on-the-job training. Familiarity with basic hand tools (e.g., wrench, screwdriver, multimeter) for routine inspection and maintenance tasks. Ability to follow SOPs, safety procedures, and technical instructions. Basic computer literacy for updating logs, entering maintenance records, and checking monitoring dashboards. Strong troubleshooting mindset-able to identify abnormal readings, unusual sounds, or environmental deviations. Preferred Skills Basic familiarity with liquid cooling systems, coolant loops, pumps, or thermal management concepts. Exposure to data center environments, server testing labs, or electronics manufacturing (internship or coursework acceptable). Understanding of GPU servers, AI hardware, or computer components. Experience using monitoring software, facility dashboards, or environmental control tools. Ability to read simple technical diagrams, equipment labels, or wiring schematics. Knowledge of preventive maintenance practices and equipment reliability fundamentals. Strong teamwork mindset and ability to communicate with technicians, test engineers, and facility personnel. Benefits Competitive salary and performance-based bonuses Comprehensive health, dental, and vision insurance 401(k) retirement plan with company match Paid time off and holidays Professional development and training opportunities Employee wellness programs Working Conditions Standard office environment with occasional lab work The test room is a noisy environment; however, appropriate hearing protection and safety equipment will be provided. Flexible schedule with occasional overtime during critical project phases Collaborative team setting with cross-functional interaction Equal Employment Opportunity (EEO) Wistron InfoComm is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

About the Role: Pay up to $40/hr Monday - Friday, 10am-6pm or 11am-7pm Overtime opportunities available! Up to $7,500 Sign On Bonus! At Kalmbach Feeds we want our Maintenance team to enjoy competitive pay with a full line of benefits including three weeks paid time off in the first year! The maintenance technician is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production facility equipment according to safety and productive maintenance systems and processes to support the achievement of the facility's business goals and objectives. The maintenance team requires someone with a high level of autonomy and requires a self-starter with a positive and proactive approach. The successful candidate must work effectively with all departments, management and employees. You repair, replace, remove, and/or modify manufacturing structures and equipment to correct feed manufacturing problems of a mechanical, electrical, and/or structural nature. You maintain accurate daily records of all work performed daily in the computerized maintenance management system You have knowledge of or be willing to obtain knowledge of PLC You are able to wear a full face respirator and pass pulmonary testing You are able to operate tow motors, pallet jacks, aerial man lifts You assess, diagnose, and evaluate feed manufacturing problems of a mechanical, electrical, and/or structural nature. You perform preventative maintenance (e.g. lubrication, inspection, etc.) for feed manufacturing structures and equipment. You maintain work area, tools, parts, and equipment in a clean and organized manner for the purposes of safety, efficiency, and appearance. You perform other related corrective maintenance functions or duties as needed. Who You Are: Safety/OSHA knowledge. Must having a valid driver's license with no suspensions Ability to meet tight schedules and handle multiple assignments. Electrical and mechanical experience in a manufacturing environment. PLC troubleshooting preferred. Ability to read electrical prints. Ability to install, diagnose, repair, wire and maintain a variety of production and building equipment. Must be able to work on raised platforms and high area Must be able to work in a dusty environment Demonstrates sense of urgency and ability to handle multiple assignments efficiently Must be able to lift 50 pounds minimum. Basic welding experience. Minimum of 3 years maintenance experience in a manufacturing environment. 5 year's experience preferred. Some tasks will be outside in all kinds of weather GED/ HS diploma required. Must be willing to work a variety of shifts, weekends and overtime. About the Company: Kalmbach Feeds offers the highest quality nutritional products for livestock, poultry, and companion animals. The company was founded in 1963 by Milton and Ruth Kalmbach with a vision to develop the finest products, providing customers with the best possible nutritional value. The Kalmbach family's traditional core values have served as the compass for consistent success for over five decades, and the company has become the regional leader within the animal nutrition industry. Kalmbach Feeds enjoys an excellent reputation for quality and integrity within the animal nutrition industry and is comprised of smart self-starters who are driven to serve customers. Our experienced, talented team utilizes cutting-edge technology and proprietary processes to deliver safe, innovative products. Our stringent ingredient testing, computer automated systems, patented technologies, dedicated manufacturing facilities, and in-house nutrition specialists guarantee it. Additional information regarding our exciting company can be found at ********************** as well as by viewing the video at https://**********************join-our-team. Kalmbach Feeds Offers: Medical, Dental, and Vision Benefits with eligibility on date of hire 401(K) (traditional and Roth options) with generous company match 3 Weeks Paid Time Off in first year Company Paid Short Term and Long Term Disability Company Paid Life Insurance Competitive Compensation On Staff Life Coach Medical and Dependent Care Reimbursement Plans Access to Beach Front Company Condo in Fort Myers, FL Kalmbach Feeds is an Equal Opportunity Employer. Each applicant for employment is considered solely based on job qualifications, without regard to race, color, religion, sex, age, disability, national origin, veteran status, or any other classification protected by law. The information contained within your resume and application, including employment history, educational history, and references, are subject to verification. Pre-employment drug screen (hair and urine), physical, and criminal background check required.

About the Role: Pay up to $40/hr Monday - Friday, 10am-6pm or 11am-7pm Overtime opportunities available! Up to $7,500 Sign On Bonus! At Kalmbach Feeds we want our Maintenance team to enjoy competitive pay with a full line of benefits including three weeks paid time off in the first year! The maintenance technician is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production facility equipment according to safety and productive maintenance systems and processes to support the achievement of the facility's business goals and objectives. The maintenance team requires someone with a high level of autonomy and requires a self-starter with a positive and proactive approach. The successful candidate must work effectively with all departments, management and employees. You repair, replace, remove, and/or modify manufacturing structures and equipment to correct feed manufacturing problems of a mechanical, electrical, and/or structural nature. You maintain accurate daily records of all work performed daily in the computerized maintenance management system You have knowledge of or be willing to obtain knowledge of PLC You are able to wear a full face respirator and pass pulmonary testing You are able to operate tow motors, pallet jacks, aerial man lifts You assess, diagnose, and evaluate feed manufacturing problems of a mechanical, electrical, and/or structural nature. You perform preventative maintenance (e.g. lubrication, inspection, etc.) for feed manufacturing structures and equipment. You maintain work area, tools, parts, and equipment in a clean and organized manner for the purposes of safety, efficiency, and appearance. You perform other related corrective maintenance functions or duties as needed. Who You Are: Safety/OSHA knowledge. Must having a valid driver's license with no suspensions Ability to meet tight schedules and handle multiple assignments. Electrical and mechanical experience in a manufacturing environment. PLC troubleshooting preferred. Ability to read electrical prints. Ability to install, diagnose, repair, wire and maintain a variety of production and building equipment. Must be able to work on raised platforms and high area Must be able to work in a dusty environment Demonstrates sense of urgency and ability to handle multiple assignments efficiently Must be able to lift 50 pounds minimum. Basic welding experience. Minimum of 3 years maintenance experience in a manufacturing environment. 5 year's experience preferred. Some tasks will be outside in all kinds of weather GED/ HS diploma required. Must be willing to work a variety of shifts, weekends and overtime. About the Company: Kalmbach Feeds offers the highest quality nutritional products for livestock, poultry, and companion animals. The company was founded in 1963 by Milton and Ruth Kalmbach with a vision to develop the finest products, providing customers with the best possible nutritional value. The Kalmbach family's traditional core values have served as the compass for consistent success for over five decades, and the company has become the regional leader within the animal nutrition industry. Kalmbach Feeds enjoys an excellent reputation for quality and integrity within the animal nutrition industry and is comprised of smart self-starters who are driven to serve customers. Our experienced, talented team utilizes cutting-edge technology and proprietary processes to deliver safe, innovative products. Our stringent ingredient testing, computer automated systems, patented technologies, dedicated manufacturing facilities, and in-house nutrition specialists guarantee it. Additional information regarding our exciting company can be found at ********************** as well as by viewing the video at https://**********************join-our-team. Kalmbach Feeds Offers: Medical, Dental, and Vision Benefits with eligibility on date of hire 401(K) (traditional and Roth options) with generous company match 3 Weeks Paid Time Off in first year Company Paid Short Term and Long Term Disability Company Paid Life Insurance Competitive Compensation On Staff Life Coach Medical and Dependent Care Reimbursement Plans Access to Beach Front Company Condo in Fort Myers, FL Kalmbach Feeds is an Equal Opportunity Employer. Each applicant for employment is considered solely based on job qualifications, without regard to race, color, religion, sex, age, disability, national origin, veteran status, or any other classification protected by law. The information contained within your resume and application, including employment history, educational history, and references, are subject to verification. Pre-employment drug screen (hair and urine), physical, and criminal background check required.

About the Role: The Refrigeration/Utilities Technician plays a critical role in ensuring the optimal operation and maintenance of refrigeration and utility systems within the facility. This position is responsible for diagnosing, repairing, and maintaining complex refrigeration equipment to guarantee consistent performance and energy efficiency. The technician will also oversee the upkeep of utility systems such as HVAC, boilers, and compressed air systems, ensuring compliance with safety and environmental regulations. By proactively identifying potential issues and performing preventative maintenance, the technician helps minimize downtime and supports uninterrupted facility operations. Ultimately, this role contributes to maintaining a safe, efficient, and comfortable environment for all facility stakeholders. Minimum Qualifications: High school diploma or equivalent. Completion of a recognized apprenticeship or technical training program in refrigeration, HVAC, or a related field. Proven experience working with commercial or industrial refrigeration and utility systems. Strong understanding of electrical and mechanical systems relevant to refrigeration and utilities. Ability to read and interpret technical manuals, blueprints, and wiring diagrams. Preferred Qualifications: EPA Section 608 Certification for handling refrigerants. Experience with programmable logic controllers (PLCs) and building management systems (BMS). Knowledge of environmental and safety regulations related to refrigeration and utilities. Additional certifications in HVAC, electrical, or mechanical trades. Experience working in a manufacturing, food processing, or cold storage environment. Responsibilities: Perform routine inspections, maintenance, and repairs on refrigeration systems including compressors, condensers, evaporators, and associated controls. Troubleshoot and resolve mechanical, electrical, and control system issues related to refrigeration and utility equipment. Maintain and service utility systems such as HVAC units, boilers, chillers, and air compressors to ensure reliable operation. Monitor system performance and maintain accurate records of maintenance activities, repairs, and parts inventory. Ensure compliance with all safety protocols, environmental regulations, and company policies during all maintenance and repair activities. Collaborate with engineering and operations teams to optimize system efficiency and implement upgrades or modifications as needed. Respond promptly to emergency breakdowns and provide effective solutions to minimize operational disruptions. Skills: The Refrigeration/Utilities Technician utilizes strong mechanical and electrical troubleshooting skills daily to diagnose and repair complex equipment issues efficiently. Proficiency in reading technical documentation and schematics enables accurate maintenance and system upgrades. Effective communication skills are essential for coordinating with team members and reporting on system status and repairs. Time management and organizational skills help prioritize tasks to ensure timely completion of maintenance schedules and emergency repairs. Additionally, knowledge of safety standards and environmental regulations is applied consistently to maintain a safe working environment and ensure compliance.

Benefits/Perks Flexible Scheduling Competitive Compensation Career Advancement Opportunities Job Summary: We are looking for a skilled Handyman to join our team! In this role, you will perform residential and light commercial maintenance work that may include pipe fitting, insulating, welding, repairing electrical or mechanical equipment, repairing buildings, floors, or stairs, and installing new equipment. You are hard-working, a team player, and dedicated to performing quality work in all that you do. Significant past experience as a professional maintenance worker is highly preferred and a positive attitude is a must! Responsibilities: Inspect, operate, or test machinery or equipment to diagnose machine malfunctions Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary Repair machines, equipment, or structures, using tools such as hammers, hoists, saws, drills, wrenches, or equipment such as precision measuring instruments or electrical or electronic testing devices Interact with customers in a professional and friendly manner Qualifications: Previous experience as a handyman / general maintenance Knowledge of job site safety rules and regulations (OSHA) Knowledge of methods, tools, and equipment used in carpentry Ability to read and interpret blueprints Must be qualified to perform at heights above thirty (30) feet with the use of a ladder, lift, or bucket truck boom Ability to lift 40+ lbs on a consistent basis Compensation: $55.00 - $240.00 per day

Description About GreenPoint AgGreenPoint Ag is a farmer-owned, American-owned company. We're committed to farmers' success because that's the only way we succeed. Seeking employees who share our dedication, we're a leading agricultural inputs company in the Southeastern U.S., operating in over 100 communities across ten states. If you're passionate about rural America and its farmers, join us. We're an Equal Opportunity Employer, fostering an inclusive workplace in a vital industry. Apply now to be part of our hardworking, passionate team. Our OpportunityWe are looking for a Full-Time Maintenance Technician for our Evergreen, AL location. If you're looking for a hands-on role in a dynamic environment, we'd love to hear from you! Our culture fosters a connected work environment, employee engagement, and career development / opportunities. If you would like to be part of a great work culture and teamwork environment, you may be the candidate we're looking for. Summary/ObjectivePerform tasks essential to agricultural wholesale operations. This position will be responsible for performing preventive maintenance and repairs at the facility. Essential Functions Follow all safety regulations and guidelines Use appropriate PPE (gloves, goggles, protective clothing) when working with hazardous materials Regularly inspect and maintain safety equipment; know their locations for emergencies Drive a forklift to transport inbound and outbound products Ensure all equipment is in good working condition; report discrepancies to site leadership Expedited response to equipment repairs. Working knowledge of conveying equipment, proper maintenance protocols to belts, bearings, pumps, and auger systems. Maintain the highest standards of safety practices and procedures at all times. Assist in equipment maintenance and associated duties Maintain a quality and professional image with customers; be responsive to their needs Clean warehouse and site for a welcoming and safe working environment Works with and assists other employees with various duties, as assigned by the supervisor Embody GreenPoint Ag Vision, Mission, Values, and Goals in daily work, contributing to a strong company culture Supervisor Responsibilities No supervisor responsibilities Required Qualifications Minimum of 2 years of experience in the industrial or agricultural maintenance field preferred Valid driver's license: must be able to meet a Motor Vehicle Review in accordance with Company policy. Must possess a valid driver's license; must be able to meet a Motor Vehicle Review in accordance with Company policy Experience driving a forklift (e.g., performing basic operations such as driving forwards, driving backwards, lifting, and lowering boom, maneuvering in tight areas without damaging products, etc.) preferred Experience working with racking systems and loading/unloading pallets (e.g., pulling and placing pallets on/off vertical product racking systems and trucks, maximizing storage by stacking products vertically, etc.) preferred Knowledge, Skills & Abilities Ability to ensure a safe working environment while performing assigned tasks Utilization of problem-solving skills to work through difficult challenges. Proficient using Microsoft Office Suite. Excellent communication skills (written and verbal). Detail oriented, with the capability to adapt to changes in a fast-paced environment. Strong organizational skills with the ability to prioritize work and multi-task. Ability to establish and maintain effective working relationships with colleagues and vendors. Always maintain professionalism. Applicants must also be able to demonstrate the following competencies: acts with integrity in products, processes, and relationships; delivers results efficiently & effectively; embraces role as an individual contributor to the warehouse team Work Environment While performing the duties of this job, the employee regularly works in a warehouse or outdoor agricultural setting. Employee will regularly encounter extreme temperatures, adverse weather, dust, loud noises, and a hazardous agricultural and/or industrial environment that requires regular use of PPE. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Needs to stay in good physical condition to regularly lift more than 50 pounds, climb ladders, perform preventive maintenance activities, and assist other plant/warehouse workers in various physical duties necessary in running an agricultural location. Employee will regularly be required to walk, stand, lift, stoop, kneel, crouch, balance, crawl, handle, feel and grasp. Must be able to work at heights between 45-65 feet from a catwalk, while using proper harness personal protective equipment on occasion to maintenance fertilizer conveyer. Workload is frequently medium to heavy. TravelLess than 5% Other Duties Please note this job description is intended to describe the general nature and level of work performed by employees assigned to this position. It is not designed to contain or be interpreted as a comprehensive list of all duties, responsibilities, and qualifications. Other job-related duties may be assigned. GreenPoint Ag reserves the right to amend and change responsibilities to meet business and organizational needs as necessary with or without notice. EEO Commitment: We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, national origin, ethnicity, sex, pregnancy, sexual orientation, gender identity/expression, including transgender identity, religion, disability, age, genetics, active military or veteran status and any other characteristics protected under applicable federal or state law. Communication with You We are mindful that the job placement market has recently been infiltrated by individuals attempting to commit fraudulent acts. Unauthorized persons have been known to place advertisements for fake positions in the name of innocent and unwitting employers by mixing them in among legitimate job postings on authorized sites and by posting them on sites not used by the genuine employer. These imposter advertisements sometimes contain contact information for interested applicants that are different from an employer's career website or company email address. Such imposter job advertisements typically include promises of high-paying jobs with the requirement that job seekers first send sensitive personal information or money to pay for things such as visa applications or processing fees. Please be advised that GreenPoint Ag will never ask a potential job seeker for any sort of advance payment as part of the recruitment or hiring process. You should look carefully at any email address that you are instructed to use to submit a job application. All email correspondence from GreenPoint Ag ends in “@greenpointag.com.” If you have questions about any of our open positions, please visit our careers website at *************************************

Our Engineered Lumber Products (ELP) manufacturing facility in Zwolle, Louisiana has an opportunity for an Industrial Millwright with a knowledge of mechanical equipment, processes and techniques to safely repair, modify, install and maintain the facility and high-tech manufacturing equipment to join our team. The pay range for this role is $26-$35 per hour. Key Functions: Machinery lubrication & other preventative maintenance assignments Repairing & troubleshooting mechanical power transmissions Bearing installment, coupling, belts, sprockets and chain drive installations Repair and troubleshooting of Pneumatic and hydraulic systems Metal fabrication and basic principles of cylinder repair Provide assistance as needed to other team members to ensure assigned tasks are safely performed Must have a high school education or GED from an accredited institution Two (2) years' experience in Industrial maintenance OR a technical certificate in mechanical maintenance Must be willing and able to work any assigned shift, to include graveyards, weekends and holidays as operating conditions require A personal and total commitment to observe all safety rules and regulations General Knowledge of\: Machinery lubrication, mechanical power transmissions, bearing installment, coupling, belts, sprockets, chain drive installations, pneumatic and hydraulic systems, metal fabrication and cylinder repair Commitment to follow all unit mechanical / maintenance practices Ability to pass a pre-employment examination, drug test, education and background check Ability to work in extreme heat/cold, navigate catwalks and ladders and perform other functions required in a manufacturing environment All applicants must upload resume detailing education and work history NOTE\: FORMAL RESUME OR LISTED WORK EXPERIENCE IS REQUIRED FOR CONSIDERATION The following qualifications are preferred: Past employment experience in a wood products manufacturing environment Experience with a Computerized Maintenance Management System (CMMS) Knowledge of fire protection systems About Wood Products We've been delivering quality building products and solutions to our customers for more than 100 years. From builders and dealers to specifiers and homeowners, we offer exceptional product performance and unparalleled support. For more than a century, we've been building our reputation as a leader in sustainable wood products. About Weyerhaeuser We sustainably manage forests and manufacture products that make the world a better place. We're serious about safety, driven to achieve excellence, and proud of what we do. With multiple business lines in locations across North America, we offer a range of exciting career opportunities for smart, talented people who are passionate about making a difference. We know you have a choice in your career. We want you to choose us. Weyerhaeuser is an equal opportunity employer. Inclusion is one of our five core values and we strive to maintain a culture where all our people feel a sense of belonging, opportunity and shared purpose. We are committed to recruiting a diverse workforce and supporting an equitable and inclusive environment that inspires people of all backgrounds to join, stay and thrive with our team. #ST1