White Construction jobs in Eau Claire, WI - 17421 jobs

Job Title: Foreman - Travel throughout the Midwest is required Department: Construction Reports To: Construction Manager Employment Status: Hourly (Non-exempt) Primary Location: Rice Lake, WI Pay Range: TBD We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Job Summary: The Foreman will oversee construction crews in the field and ensure that safe, accurate, and timely work is being performed. The Foreman will be responsible for project walkouts, coordination with customer and company management, quality control, and general supervision of onsite work. Job Responsibilities (Including, but not limited to): • Manage and track daily activities of assigned crews. • Continually inspect work sites for potential hazards and/or safety concerns, ensuring safe work environments and compliance with state, federal, OSHA, and Congruex safety policies. • Operate (but not limited to) track-hoe, back-hoe, mini excavator, skid steer, dozer, haul truck and trencher • Excavate and backfill, in a safe manor, trenches for underground utilities • Perform placement of conduit in open trenches • Proof conduits • Pothole existing utilities • Complete rigging and setting of structures • Form and pour concrete • Place asphalt • Track materials, aggregates, and project requirements. • Communicate both orally and written, with local officials, company management and staff, customers, and other stakeholders. • Update the Construction and/or Project Manager on crew needs, progress, etc. • File complete and accurate paperwork daily. • Ensure work sites have been adequately cleaned up and worksite is restored after work. • Travel to and from assigned job sites. • Assist and train crews as needed. • May schedule and coordinate subcontractors. • Other duties as assigned. Required Skills & Qualifications: General • High school diploma or equivalent • Ability to pass a pre-employment background check and drug test • Possess and maintain a clean Motor Vehicle Record (MVR) • Have board experience in a telecommunications construction environment, including placing, pulling, and transferring strand, coax, and fiber • 5 years minimum operating heavy construction equipment • Ability to read and understand blueprints and project specifications • Ability to communicate effectively verbally and in writing with crew, leadership, and customers • Ability to manage crews • Ability to drive and operate company vehicles, bucket trucks, and work equipment • Ability to ensure compliance with OSHA and other regulatory bodies' safety standards • Ability to utilize proper safety equipment • Bilingual Spanish and English speaking preferred Physical Demands and Work Environment • Must be able and willing to work indoors and outdoors, subject to inclement weather conditions • Must be able to maintain visual and audible contact with other crewman and all moving or stationary persons/vehicles/objects to ensure safe coordination of movement • Must be able to work around heavy equipment and machinery • Must be able to stand or walk for long periods of time • Must be able to lift and carry up to 50 pounds • Routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting • Must be able to stand, walk, sit or be in other physically demanding positions for long periods of time • Must be able to work while wearing safety boots, safety glasses, hardhat, and any applicable safety gear Required Licenses/Certificates/Registrations: • OSHA 30 • Commercial Driver's License (CDL) • DOT Medical Card • Competent Person Certification • Confined Space training • Trench Safety training • Pole Climbing & Ladder Safety • Flagger Certification • Forklift Certification • First Aid / CPR All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership. Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experience Service customer-owned instruments with a high level of craftsmanship Maintain store owned gear, as requested Complete warranty repair work Additional duties as assigned Why Guitar Center? Here's just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling ************** ext. 2862 or by sending an email to ***************************.

This role is not open for submissions from outside staffing agencies Plant Manager We are actively seeking a Plant Manager for our New Berlin, WI facility. The Plant Manager will direct and manage plant operations with overall responsibilities for Production, Maintenance, Quality, Safety, Inventory and Cost Control, Logistics, and other production-related activities. We are growing at a tremendous rate which presents a fantastic opportunity to join our company and achieve long-term career goals. WHO YOU ARE: A Change Management Leader, a Team Builder with a focus on Safety, who is Goal Oriented and has a Servant Leadership work style. The Plant Manager is responsible for: Directing and managing plant operations for production, maintenance, quality, and shipping and receiving. Setting production goals, monitoring, and managing all aspects of production. Implementing cost effective systems of control over capital, operating expenditures, workforce, wages, and effective use of labor. Managing capital asset maintenance. Establishing and monitoring overall plant performance for production and quality standards. Controlling and minimizing labor overtime, premium freight, and repair expenses. Maintaining, adjusting, or replacing existing plant facilities and equipment when necessary. Providing leadership and training to accomplish the company goals and objectives. Implementing and maintaining preventative maintenance programs. Incorporating shop floor organization and plant cleanliness processes. Providing direction, development, and leadership to production supervisors. Managing and monitoring branch safety conditions to ensure full OSHA compliance and to reduce the incidence of work-related injury to employees. Communicating regularly with senior management and support functions. SKILLS YOU BRING: 5 years manufacturing experience with minimum 3 years supervisory experience in a GLASS fabrication environment Bachelor's degree or combination of education and experience Business finance acumen and P&L knowledge/experience Background with manufacturing methods, process improvement programs and procedures including Lean manufacturing techniques required Must have excellent follow through and communication skills with the ability to prioritize tasks and manage multiple assignments Production and Capacity Planning Background WHY CHOOSE US: We offer the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if injured on the job. We are pleased to offer a comprehensive wellness initiative that includes access to a percentage of your pay daily, if needed, and a progressive financial training program. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health. We bear most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you we value you as an employee and how we will help you achieve financial independence. We are one of North America's largest fabricator and distributors in our industry, with many facilities throughout the United States and Canada. With its unmatched product line, we have created a Total System Approach to satisfy virtually any customer requirement. We have the products, equipment, and an experienced team to take projects from design concepts with the architect to final installation by the contractor. We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.

Wisconsin Building Supply operates locations throughout Wisconsin supplying windows, doors, roofing, siding, millwork, builders hardware, columns, trim, mouldings, cabinetry, countertops, decking, railing, gypsum, lumber & plywood, insulation, and additional building materials. A Brief Overview The CDL Driver I is responsible for the safe, efficient transportation of materials to various job sites and other locations. This role requires maintaining a Class A or B Driver's license, inspecting and maintaining trucks, reporting shortages and claims to supervisors, and assisting in loading and storing of materials. Drivers must perform pre- and post-trip inspections, manage logs, and adhere to hours-of-service requirements. Pay Range: $22.00-$27.00/hr. What you will do Operates Class A or B commercial vehicles in a safe, compliant, and efficient manner. Responsible for deliveries to both active construction sites and completed build locations; city-based deliveries and inter-state travel may be required. Performs thorough pre-trip and post-trip DOT inspections to ensure vehicle safety and compliance with federal regulations. Provides exceptional customer service by maintaining a professional demeanor, addressing client needs, representing the company positively during all interactions, and relaying messages received from customers while on job sites. Organizes and secures loads to ensure safe transport and verifies orders for accuracy before departure and upon delivery. Adheres to all regulations and safety guidelines established by the U.S. Department of Transportation (DOT) and complies with all regulations and conditions outlined in applicable permits. Prepares and maintains accurate DOT-compliant logs of driving hours, on-duty time, and rest periods in accordance with federal regulations. Delivers and unloads materials accurately and safely, ensuring customer satisfaction at the point of delivery. Records all merchandise returned by truck and assists in unloading materials returned for credit, ensuring proper documentation and handling. Safely and efficiently operates a truck-mounted forklift to load, unload, and transport materials at job sites. Maintains the cleanliness and organization of the truck, ensuring it is well-kept and ready for operation. Assist with stocking and organizing inventory in the warehouse and production areas. Required For All Jobs Perform other duties as assigned. Comply with all policies and standards. Adheres to Company's commitment to workplace safety. Education Qualifications High School Diploma or GED required. Experience Qualifications Basic CDL experience with flat beds and/or tractor trailers required. 1-2 years CDL experience preferred. Experience transporting and handling lumber and building materials required. Skills and Abilities Ability to do basic math, read orders, write instructions and complete forms. Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. Ability to deal constructively with conflict and recognize potential problems. Maintain current operator's license and meet company driver qualification requirements. Knowledge and ability to use safe lifting techniques. Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Ability to collaborate effectively with staff, dispatchers, and other drivers to ensure smooth operations and timely deliveries. Knowledge and understanding of federal DOT regulations, logbook requirements, and HOS compliance. Licenses and Certifications Class A CDL License or Class B CDL License required. For Boom Crane CDL Driver positions - a Certified Drill Rig Operator-NCCCO Boom Certification preferred - maintain active accredited certification for equipment type (e.g. NCCCO, NCCER, CIC) preferred. Additional Potential Opportunities based on experience: CDL Driver II CDL Long haul CDL Wide Load CDL Driver Boom Crane Wisconsin Building Supply, a Division of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

This role is not open for submissions from outside staffing agencies Safety Manager Trulite is GROWING! We are looking for Safety Manager to be based at our New Berlin, WI location. The Safety Manager is responsible for the Environmental, Health, and Safety programs related to OSHA, EPA, and other regulatory agencies for the entire plant location. $70,000-$80,000 Who You Are: You are willing to work hand in hand with other plant management to develop and deliver plant safety reports and statistics and provide leadership and development regarding environmental health and safety matters. You will maintain records, development of recordable incident investigation and information for corporate conference calls, development of corrective action plans to prevent reoccurring problems, etc. Skills You Bring: BS Degree in Safety or equivalent or two years' experience as a safety professional or a combination of both OSHA 30 preferred Good written and verbal communication skills A team player Must be able to train other employees effectively Experience working with quality systems is preferred What You Will Be Doing: This position is hands on and requires you to spend 90% of your time on the production floor Directs the organization's safety programs to protect employees and maintain safe working conditions. Facilitates monthly safety committee meeting and develops weekly toolbox talks and monthly safety trainings per OSHA and company's yearly training structure Formulates and suggests work safety standards Risk prevention areas include hazardous materials exposure, accidents, ergonomic concerns, and other unsafe conditions Meets compliance and reporting requirements of federal or state regulations. Performs New Hire Safety Orientations and other safety training and maintains appropriate records Assists with investigations of incidents, accidents, complaints, and cases of ill health. Assists with risk assessments and site inspections. Coordinates yearly OSHA audits with state and corporate partners Works with management and maintenance to ensure equipment is installed correctly/safely as well as assists with ensuring maintenance of equipment is up to date and scheduled accordingly Keeps all environmental tasks up to date per state, federal, and company standards. Applies for permits and does necessary inspections/tests per branch environmental plans. Updates share point site to status of environmental compliance Schedules and ensures yearly emergency action plan drills are scheduled and completed Evaluates and coordinates purchasing of personal protection equipment as well as coordinates the plant's safety shoe and prescription eyewear program Continues efforts towards INSHARP and VIPP Certifications for the branch Why Trulite: Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if injured on the job. We are pleased to offer a comprehensive wellness initiative that includes access to a percentage of your pay daily, if needed, and a progressive financial training program. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100% improving your financial health. Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence. We are an Equal Opportunity And E-Verify Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.

The Business Operations Specialist/Legal Analyst plays a critical role in Legal & Compliance (L&C) Transformation and Operations team and is responsible for driving strategic process improvements and operational excellence across key legal operations functions. This role bridges tactical execution with strategic oversight, enabling cross-functional alignment and supporting client's commitment to ethical business practices. Key Responsibilities: Oversee daily operations across billing and invoicing, eDiscovery, request triage and broader legal support and ensure efficient workflows and timely resolution of inquiries Manage legal billing operations, including invoices and vendor onboarding; Act as a liaison between L&C and cross-functional partners, such as Procurement, Finance, and IT Build and maintain strong relationships with Outside Counsel partners and other legal vendors; Ensure alignment with preferred vendor guidelines to optimize external spending Execute eDiscovery requests and ensure accurate documentation, confidentiality, and compliance with internal protocols and regulatory requirements Triage and prioritize incoming requests using multiple dashboards and intake queues; Ensure timely resolution and high-quality service to key stakeholders Proactively identify and mitigate operational risks by anticipating challenges, fostering cross-functional collaboration, and implementing preventative solutions that support business continuity Develop and analyze operational reports to inform decision-making, drive continuous improvement, and help to simplify existing complexities Create and maintain clear, user-friendly documentation to educate all stakeholders on compliance requirements, operational workflows, and legal technology tools Support onboarding and mentorship of new L&C team members; Share knowledge and best practices to strengthen team capability and foster a culture of continuous learning Exhibit an innovative and growth mindset when executing responsibilities; Bring new ideas to Operations leadership on a consistent basis Requirements: 3-5 years of experience in legal operations, compliance, or related roles Proficiency with legal billing systems, eDiscovery tools, and spend management platforms strongly preferred Strong communicator with the ability to present complex information clearly in written and verbal form Proven ability to identify, implement, and clearly document processes and related improvements Education: Completed BA strongly desired for consideration but not required.

Are you proactive, driven to be accurate, and an amiable communicator? Once you have identified your area(s) of expertise, do you excel in the knowledge of those subjects? Would those who know you well say that you tend to be more book smart than street smart, and that you can become relentless in the pursuit of factual information? Is your communication style reasonably social and full of data? Do you hate being wrong and tend to err on the side of caution to avoid failure? If you are interested in this position, start by copying this link into your browser and completing the required survey: ******************************************** Job Overview: Support the Interior Designer by assisting with administrative and coordination tasks related to client design selections, meetings, and documentation. This position is ideal for someone passionate about residential design who wants to learn the full custom home interior design process from the ground up. Under the guidance of an experienced Interior Designer, this role will help ensure client meetings, selection sheets, and design center operations run smoothly and efficiently. Primary Responsibilities: Work with Interior Designer and learn how to guide a buyer throughout the selection process. Assist with any reselections needed for discontinued products. Maintain a welcoming, organized design center environment - ensure samples, options, and displays are clean, labeled, and up to date. Support the design team in preparing for homeowner meetings, including printing selection sheets, gathering samples, and setting up meeting spaces. Assist with updating and organizing selection sheets, color photos, and redline drawings. Input and track design selections and pricing requests (PRs) in the system. Help organize and file final homeowner documents, cabinet layouts, and countertop recommendations. Prepare and maintain “audit-ready” design files. Support change order updates as directed by the Interior Designer. Update design center displays, samples, and option-level materials. Communicate with vendors and internal departments (Purchasing, Sales, Construction) to assist in tracking or updating design-related information. Attend occasional client meetings to observe and learn the design selection process. Any other Interior Design Assistant duties and responsibilities as assigned. Required Skills & Knowledge: Organization: Strong attention to detail and ability to manage multiple administrative tasks accurately and efficiently. Communication: Excellent written and verbal communication skills; able to relay information clearly to clients and team members. Technology: Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook); familiarity with design software (AutoCAD, Revit, Chief Architect, or similar) a plus. Teamwork: Willingness to learn and support other team members; takes direction well and works collaboratively. Time Management: Ability to prioritize and complete tasks within deadlines in a fast-paced, client-facing environment. Professionalism: Reliable, punctual, and represents Design Tech Homes' values and customer experience standards. Position Goals: This role is designed to provide hands-on exposure to the custom home design process. Over time, and with training, the Interior Designer Assistant will advance toward leading client color selection meetings and managing design projects independently. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance Education: Associate (Required) Experience: Interior Design: 2 Years (Required) Ability to Commute: The Woodlands, TX 77380 (Required) Work Location: In person

About Us: Steves & Sons, a 159-year-old family-owned door manufacturer, seeks a results-driven Sales-Focused General Manager to drive growth, foster customer relationships, and oversee operations. We're looking for a seasoned leader with a strong sales background (80%) and operational expertise (20%) to manage our sales team, develop strategic directions, oversee and enhance production goals, and ensure a seamless customer experience. Key Responsibilities: Sales (80%): 1. Lead the sales department to exceed performance goals 2. Develop and maintain customer relationships to drive growth and satisfaction 3. Negotiate with suppliers to secure the timely delivery of materials at competitive prices 4. Collaborate with sales teams to translate customer needs into high-quality products 5. Foster a customer-centric culture across the organization Operations (20%): 1. Oversee plant operations, production, quality, and safety 2. Implement lean principles and continuous improvement to maximize efficiency 3. Manage inventory, scheduling, and budgeting 4. Ensure compliance with quality control standards 5. Lead cross-functional teams to achieve operational excellence Leadership Qualities: 1. Strong leadership and mentorship skills 2. Proven ability to motivate and direct high-performance teams 3. Data-driven approach to decision-making 4. Excellent communication and collaboration skills Qualifications/Requirements: 1. 10+ years of combined leadership in sales and manufacturing 2. Bachelor's degree in business administration, engineering, or related field (preferred) 3. Lean manufacturing and sales/marketing strategy expertise 4. ERP & CRM software proficiency 5. Willingness to travel monthly and attend 2 trade shows/year Compensation/Benefits: 1. Competitive Annual Salary 2. Year-End Bonuses 3. Medical, Dental, Vision Insurance 4. 401(k) with employer match 5. PTO What We Offer: 1. Opportunity to lead a dynamic sales team 2. Collaborative and customer-centric work environment 3. Professional growth and development opportunities 4. Competitive compensation and benefits package How to Apply: If you're a sales-driven leader with operational expertise, please submit your resume.

Holder Construction Company, an Atlanta based commercial construction company with operations throughout the United States, is seeking a highly motivated QA/QC (and or office/field) professional to join our project team in Dallas, TX. This position is responsible for the implementation and management of the project quality control program and performance of daily quality procedures and provide proper coordination and construction that meet project standards and requirements. The position will work directly with both internal and external team members, to provide document review, coordination, and implementation during construction and commissioning. Position Description Ability to work and communicate effectively with the project team, subcontractors, consultants and owner representatives. Execute inspections with trade partners to oversee checklist and accuracy before and after inspection. Familiarity with a broad range of general construction processes and nomenclature including testing laboratory protocols and procedures, soils and concrete testing, asphalt paving, structural steel and welding and general construction observations. Methodical and detail-oriented to assist the project team in assuring that Project QC documentation are complete, and procedures are followed to ensure issues are closed and project risk is mitigated. Ability to read and understand construction plans and specifications including identification of errors or redundancies for resolution by others. Mange equipment tracking tools by updating inspection statues and project workflows. Conduct regularly scheduled quality and office/field meetings, review logs of Deficiencies, Punch List, etc., and provide documentation and meeting minutes. Coordinate with trade partners for inspection paperwork, manage testing reports and train on software tools for best practices and consistency. Create, document and distribute all checklists, inspections, completion lists, punch lists, and reports on the office side. Communicate to facilitate field activities required for issue completion, along with issue durations and due dates with trade partners. Prepare weekly meeting agendas and lead weekly quality walks. Work intimately with both office and field staff to understand the project schedule in order to execute the inspection process to support critical commissioning and energization dates. Participate in Trade pre-installation meetings to verify that each Trade has an understanding of the Project's QC requirements before beginning work on site. Monitor construction activities and review materials and equipment delivered to the project for adherence to specifications. Ability to coach and mentor junior employees; seeking opportunities to grow in leadership roles. Position Requirements 5-7 years of office or field construction focused experience on projects similar in nature, size, and extent. Bachelor's degree in construction management, engineering, or equivalent combination of training and experience. Proficient in MS-based software including Word, Excel, Outlook, Bluebeam, BIM360, Field, SmartSheet, etc. Certifications preferred but not required: ICC (reinforcing, concrete, masonry, structural steel, soils, etc.) ACI (American Concrete Institute) ASNT (American Society for Nondestructive Testing) AWS (American Welding Society) NICET (National Institute for Certification in Engineering Technology) Since 1960, Holder Construction Company's mission to provide clients with quality construction services has resulted in over 80% repeat client business. Holder is a national construction services firm respected as a leader in “team approach” project delivery. It consistently ranks as one of the Nation's top 100 contractors. We are a performance-based company with an excellent career development program. We offer a top-notch compensation and benefits package which includes health, life, dental, vision, flexible spending program, long term disability, family paid time off and a 401(k)-retirement plan. Our dynamic company culture provides associates with an environment that encourages teamwork, continuous improvement, and performance-based advancement. Please note that Holder Construction Company does not sponsor anyone for immigration benefits or immigration status. EEO-AAP Substance abuse testing is a condition of employment.

Gray Construction is looking to add a Japanese Speaking Project Engineer - Food and Beverage to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Visa Sponsorship: This role is not eligible for visa sponsorship. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Dashiell is a leading national provider of technical services to the electric utility, power generation, industrial, renewable, and energy industries. These services include planning and systems studies, design and engineering, maintenance and testing, program management, construction, and turnkey EPC projects. Built on 50 years of experience handling large-scale complex projects; Dashiell is unique in that we are a turnkey Engineering, Construction, and Testing company that specializes in medium and high voltage electrical infrastructure. More information about Dashiell can be found at ***************** Job Title: Contracts Administrator Job Location: 12301 Kurland Drive, Houston, TX 77034. Primary Function: The Contracts Administrator is responsible for processing and tracking workflows around customer contracts and other agreements from the initial draft through completion of the project execution phase. The position will be based in our Houston, TX office located at 12301 Kurland Drive, Houston, Texas 77034 and will report to Dashiell's General Counsel and will also support Dashiell's other attorneys and Dashiell's Sales department (for contract-related matters). Duties & Responsibilities Employee may be called upon to perform any or all of the following functions: Process incoming contracts and track responsibility for legal review (including prime customer contracts, subcontracts, services agreements, purchase orders, confidentiality agreements, and other agreements). Organize and save documents in appropriate file locations. Review and verify terms of certificates of insurance received from subcontractors and other third parties. Populate contract templates with appropriate project and third-party information and distribute to internal stakeholders and third-party partners for their review and comment. Assist Dashiell's Sales and Procurement departments with tracking contract workflows and renewals. Support legal and project personnel as needed for contract interpretation, notices, and change orders. Perform special projects and complete other duties as assigned or requested. Minimum Qualifications / Experience Bachelor's degree in Legal Studies, Political Science, or equivalent is preferred; related work experience may be substituted. Alternatively, an associate's degree in Paralegal Studies with 2 additional years of contracts experience may be substituted. 3+ years of contracts experience in the construction or services industries required, with a focus on contracts and subcontracts management preferred. Experience related to Engineering, Procurement, and Construction (EPC) projects in the electric power industry (transmission and distribution) preferred. Advanced proficiency in Microsoft Office Superior organizational skills and attention to detail. Self-starter who can work independently while supporting the needs of the team. Excellent communication skills (both written and verbal). Ability to communicate effectively to all levels of the organization. Demonstrated ability to multitask. Physical Requirements: This position requires minimal physical effort. Must be able to endure prolonged periods sitting at a desk and working on a computer for a minimum of 8 hours a day While performing the duties of this job, the employee will primarily work indoors, with occasional outdoor exposure to year-round weather conditions and noise. Must be able and willing to travel overnight for trainings and/or meetings as required (10%) Working extended hours, including weekends, may be required periodically. May occasionally lift up to 25 pounds at a time. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions as defined per Company policy. Equal Employment Opportunity Dashiell is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. Dashiell Corporation provides a competitive compensation and benefits package. The Company provides life insurance, accidental death & dismemberment insurance, long-term disability insurance, and an employee assistance plan at no cost to the employee. Benefit offerings also include a choice of traditional PPO or one of two HDHPs, with corresponding FSA or HSA, dental, vision, supplemental life insurance, short-term disability insurance, critical illness insurance, group accident insurance, hospital indemnity insurance, a 401(k) with immediate vesting, and more! Must be at least 18 years of age and legally authorized to work in the United States on a permanent basis without visa sponsorship. No third-party recruiters, please.

We are looking for 3rd shift availability. Shift hours are Friday through Sunday 5am to 5pm. • Coordinate between Veritas Steel Production and DOT Inspectors to ensure DOT witnessing of production operations and QC hold points are being completed. • Perform visual inspection of material as required. • Perform layout checks as needed. • Perform rotational capacity tests on bolts prior to use in shop. • Work with outside inspectors to resolve quality issues on the floor. • Monitor welder qualification tests. • Monitor and record welding parameters to insure compliance to approved WPS. • Be able to read and understand the Welding code and Specifications. • Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed. • Develop improvements in the quality control process to facilitate flow of work through shop. Primary Responsibilities: How will you accomplish the Objectives? • Perform in a manner that will assure quality work flowing through the shop. • Work with welders and leadmen to maintain quality. • Be available, by use of a radio, etc. to perform needed checks. • Maintain a log of work done, and complete required reports. • Interpret the Specifications and applicable Codes. • Ability to be flexible to work either early or late within assigned shift as needed. • Coordinate inspection of QC hold points between production and DOT Inspectors. • Use and encourage safe working habits. Must have CWI Certification NACE or BCI Certification is desired Ability to be conscious of Specifications and Company standards Ability to be organized and precise in maintaining a diary and reports Must have good people skills in dealing with difficult situations Ambitious person to help meet department and company goals and schedule. Competencies/Skills To perform the responsibilities, you must have the ability and skills to: • Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules. • Coordinate your work with shipping department to assure loads have been inspected and ready to ship. • Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop. • General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed. Measures of Success: Objective facts that demonstrate great performance. • Outstanding work record, great attendance record and always-on time. • No accidents. A safe worker is an asset to both their fellow worker and the company. • Increase throughput in the area that work being performed being able to streamline the required work and constantly making positive improvements. • Accept positive feedback from fellow workers and supervisors, on performance and competencies. HOURS - Friday - Sunday 5am - 5pm

About the Company The Assistant Project Manager will bid projects through the award stage, pre-construction, project construction, administrative duties, site visits, and project completion and close out process. About the Role Duties/Responsibilities: Assists with managing project through bid, award, construction, and completion Communicates daily with owner, construction Superintendents, and internal divisions Manages RFI's, submittals and change orders Attends regular site visits as required by the project Assists Design Manager with production and quality control of project scoping documents Qualifications Education and Experience: Construction Science Degree or related equivalent degree Minimum of 3 years' experience in commercial construction Required Skills Ground up experience in banking, automotive, medical, self-storage and/or the restaurant industry is preferred. Project management experience, including all elements of scope, schedule, cost, risk, quality, resources and communications Strong problem-solving and analytical skills Ability to communicate clearly and concisely, both orally and in writing Proficiency in Microsoft Word, PowerPoint, Excel and Project Basic commercial construction process and procedure fundamentals Some travel required Preferred Skills Physical Requirements: Prolonged periods sitting at a desk and working on a computer. Must be able to lift up to 15 pounds at times.

Job Title: Utility Locator - Job Title: Laborer - Travel will be required throughout the Midwest Department: Construction Reports To: Construction Manager Employment Status: Hourly (Non-exempt) Primary Location: Rice Lake, WI - Travel will be required throughout the Midwest Pay Range: TBD We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Job Summary: The Laborer works on the construction site and is responsible for cleaning the site to prepare it, removing hazards, loading and unloading materials, and operating and using various tools and equipment to complete assigned tasks. Job Responsibilities (Including, but not limited to): · Attend and participate in morning and afternoon job specific safety / huddle meetings as needed · Operate various tamping machines as per specifications · Inspect machines, equipment and assist with everyday maintenance · Assist with loading, unloading, and preparing of jobsite materials · Maintain neat and clean work area · Inspect and operate hand tools for various activities · Assist the operator with excavation of trenches, placement of shoring and backfilling procedures · Dig entry and exit pits · Placement of conduit in open trenches · Proofing conduits · Potholing existing utilities · Assist with rigging and setting of structures · Forming and pouring of concrete · Prep and placement of asphalt · Maintain safety of company vehicles and ensured optimal utilization · Ensure compliance to customer requirements and completed activities · Observe and promote safety compliance · Complete required safety training annually · Report injuries and other accidents to the foreman · Assist coworkers in ensuring site is clean and organized at the end of each shift · Other duties as assigned Required Skills & Qualifications: · High school or equivalent education · Valid Driver's license · Reliable transportation to various jobsites in the area · Subject to pre-employment background check, drug test, and MVR o Subject to random drug screenings · Ability to follow instruction · Strong interpersonal and communication skills with the ability to interact with crew, leadership and clients · Strong understanding of safety procedures and policies · Must be able to meet physical demands of the position; ability to lift up to 75 pounds · Excellent vision or the use of prescription lenses · Exceptional manual dexterity and hand-eye coordination · Perform a variety of manual tasks for extended periods of time in unfavorable weather conditions · Willing to work overtime, nights, and weekends · Willing to work in inclement weather · Willing to work at heights Desired Skills and Qualifications (but not necessary): · Previous experience and knowledge of underground utility construction · Experience in operating small equipment and hand tools Physical Demands and Work Environment Must be able and willing to work outdoors and in inclement weather conditions Ability to work a flexible schedule to include: nights, weekends, holidays, and on-call as needed. Must be able to lift and carry materials of all shapes and sizes, weighing 40 to 90 pounds Must be able to maintain visual and audible contact with other crewman and all moving or stationary persons/vehicles/objects to ensure safe coordination of movement Must be able to safely operate company vehicles or workaround heavy equipment and machinery Must be able to stand or walk for long periods of time Must be able to stoop, kneel, crouch and crawl while performing work Must be able to ascend and descend ladders Must be able to work in small/confined areas Must be able to work while wearing safety boots, safety glasses, hardhat, and any applicable safety gear. Minimum Required Licenses/Certificates/Registrations: · Valid driver's license · OSHA 10 All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship. Department: Construction Reports To: Construction Manager Primary Location: Rice Lake, WI - travel will be required throughout the Midwest We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Job Summary: Utility Locators drive company vehicles to job sites and use digital utility maps, along with specialized equipment, to find underground cables, pipes, and other utilities to prevent damages and ensure safety within the excavation, landscaping, and construction process. Job Responsibilities (Including, but not limited to): · Utilizes the provided mapping tools and other location information, along with locating equipment, to locate underground utilities including, but not limited to electric and gas utilities, telephone, and other communication lines · Indicates utility locations through the utilization of paint and flags · Represent Congruex in a positive and professional manner at all times · Clean and maintain all company vehicles and equipment assigned for use · Perform duties in standard and high-risk areas · Safely and successfully perform duties all year round · Perform physical tasks required to successfully complete day-to-day operations · Travel overnight to various sites as requested · Other duties as assigned Required Skills & Qualifications: General · Valid Driver's License (unrestricted) · Pass a pre-employment drug test and Motor Vehicle Record (MVR) · Basic computer skills · At least 2 years of recent experience in underground utility locating · Ability to operate all equipment safely and productively · Strong interpersonal communication skills with the ability to interact with the crew, leadership, and clients · Function effectively as an integral part of a team · Meet physical demands - lift and/or move 50 to 150 pounds as well as stand and walk lengthy distances (1+ miles) over uneven terrain · Ability to perform all work outdoors, subject to inclement weather conditions Physical Demands and Work Environment · Must be able and willing to work outdoors, subject to inclement weather conditions · Must be able to maintain visual and audible contact with other crewman and all moving or stationary persons/vehicles/objects to ensure safe coordination of movement · Must be able to work around heavy equipment and machinery · Must be able to stand or walk for long periods of time · Must be able to lift and carry up to 50 pounds · Routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting · Must be able to stand, walk, sit or be in other physically demanding positions for long periods of time · Must be able to work while wearing safety boots, safety glasses, hardhat, and any applicable safety gear Required Licenses/Certificates/Registrations: · OSHA 10 · CDL Preferred All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Kitchell is seeking a Project Estimator to plan, organize, and implement accurate estimating functions for assigned projects. This role will communicate and work within estimating staff to ensure accurate estimates are professionally prepared in appropriate formats and in a timely manner and is critical in delivering accurate cost projections, supporting business development, and ensuring project success from concept through GMP. Duties & Responsibilities Review design documents to understand scope and clarify ambiguities with internal team, design team or Owner. Prepare take-off for the following trades: Program Area, Interiors. Enter line items in estimating software and price the following trades: Interiors, Enclosure Systems, Structural Systems, and Sitework. Understand the systems and historical costs for interior trades Develop sub lists and issue project documents to the subcontractor community. Contact subcontractors for budget pricing and to clarify/understand various scopes of work. Collaborate with other individuals in the organization to obtain support and commitment to the estimate. Develop bid posting scopes and review bids to ensure all assigned trades have a complete scope on competitive and negotiated projects. Distribute project documents and relevant project information to the project team. Track responsibilities of team preparing the estimate. Close-out bids on Smartbid. Review all estimates and bids with Sr. Estimator and/or Estimating Manager. Establish and maintain effective and professional relationships with internal and external clients. Perform other duties as assigned Education and Experience 2-7 years of applicable experience Preferred: Associates or Bachelor's degree in Construction Management or related field Knowledge and Skills: Strong leadership, analytical, and communication skills. Experience in healthcare, higher education and commercial markets: Experience with the CMAR delivery method. About Our Company Founded in 1950, Kitchell began as a commercial contracting business and over the years developed new talents and enterprises, acquiring complementary businesses and expertise to remain competitive. Today, Kitchell Corporation serves as the holding entity for several companies that are integral to Kitchell's core business, as well as those that operate independently. We provide a wide range of services within the built environment, including general contracting, construction management, development, facilities management, engineering, architecture, and myriad other services. Our employees manage projects from our main offices located in Arizona, California, and Texas. We offer an entrepreneurial environment that fosters personal and professional growth through in-house education programs, formal and informal mentoring, and cross-training opportunities. At Kitchell, we prioritize internal growth and building careers from within. We consistently rank among the top places to work, thanks to our tenured staff and outstanding benefits that are designed to enrich our employees' physical, mental, emotional, and financial well-being. These benefits include company performance bonuses, discretionary stock options, incentive bonuses, health, and life insurance, health savings accounts (HSA) with wellness incentives, flexible spending accounts (FSA), 401(k) plans with a 4% company match, tuition reimbursement, weight loss programs, discounted auto insurance, identity theft protection, rewards programs, and much more. Kitchell is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Orion Construction Group is full-service general contractor specializing in commercial construction projects. We offer comprehensive preconstruction services, project management, and a hands-on approach that ensures every project is delivered on time, on budget, and with exceptional quality. Role Description This is a full-time on-site role for a Construction Superintendent. The Construction Superintendent will be responsible for overseeing daily on-site operations, managing construction schedules, and ensuring project deadlines and budgetary constraints are met. They will lead and coordinate teams, ensure construction compliance with safety standards, communicate regularly with project managers, and resolve any on-site challenges to ensure smooth project execution. Qualifications Proficiency in Construction Site Management and strong familiarity with Construction Safety standards and practices Effective Organization Skills to manage multiple facets of a construction site efficiently Experience in Budgeting and adhering to financial constraints throughout project execution Expertise in Project Management, including planning, scheduling, and resource allocation Strong interpersonal and communication skills to lead teams and liaise with diverse stakeholders Proficiency in construction software and tools is a plus Understanding of local building codes and regulatory requirements

Job Title: Operator I, II, III - Travel throughout the Midwest is required Department: Construction Reports To: Construction Manager Employment Status: Hourly (Non-exempt) Primary Location: Rice Lake, WI - Travel is required We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Job Summary: The Operator will operate heavy machinery for construction or excavation projects in a safe manner, avoiding utilities and other obstacles. Job Responsibilities (Including, but not limited to): · Operate heavy equipment in compliance with the company's operating safety policies and procedures. Load and unload equipment from vehicles and trailers. · Responsible for regular maintenance and care of the assigned heavy equipment, produce any documentation needed for each job, daily communication with managers is a must. · Loads and hauls the machine. · Drives, sets up, and breaks down safely and efficiently. · Operates heavy equipment near active utilities. · Have knowledge of shoring systems and how to use them · Rigging and setting of structures · Along with operating must be willing to assist in other activities such as but not limited to o Placement of conduit in open trenches o Proofing conduits o Potholing existing utilities o Forming and pouring of concrete o Placement of asphalt · Avoids any marked utilities and implements all precautions to prevent utility strikes. · Communicates with supervisors for job details. · Before the equipment is utilized, walks path to ensure all utilities have been located and develops a plan for going above or below each utility or obstacle in the path. · Inspects and maintains job equipment. · Adheres to all company policies, procedures, standards, and safety rules. May be required to work additional hours and/or weekends, as needed, to meet deadlines. · Performs other duties as assigned. Required Skills & Qualifications: · High school diploma or equivalent required. · Minimum 1-year prior experience using the locating equipment to find any underground utilities. · Must have experience operating heavy equipment near active utilities. · Must be familiar with locate systems. · Ability to operate an asphalt roller, skid steer, backhoe, mini excavator, vacuum truck, bore machine, and other heavy equipment. · Must have a valid driver's license. Possession of a commercial driver's license (CDL) with tanker endorsement or a willingness to obtain the license. DOT Medical Card. Experience with Ditch Witch and Vermeer is preferred. · Must be able to operate the equipment safely. · Read and understand plans and specifications. · Must follow all OSHA, ANSI standards, as well as company rules & regulations. · Knowledge of basic computer skills. · Experience and knowledge of basic shoring methods Physical Demands and Work Environment · Must be able and willing to work outdoors, subject to inclement weather conditions · Must be able to maintain visual and audible contact with other crewman and all moving or stationary persons/vehicles/objects to ensure safe coordination of movement · Must be able to work around heavy equipment and machinery · Must be able to stand or walk for long periods of time · Must be able to bend and lift and carry up to 50 pounds · Routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting · Must be able to stand, walk, sit or be in other physically demanding positions for long periods of time · Must be able to work while wearing safety boots, safety glasses, hardhat, and any applicable safety gear Required Licenses/Certificates/Registrations: · DOT Medical Card · Commercial Driver's License (CDL) · First Aid Certification · Flagger Certification · Competent Person Certification · OSHA 10 · Silica Training · Confined Space Training · Trench Safety Training All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Are you a master of multitasking with a passion for precision?We're looking for a Logistics Coordinator to work with a dynamic logistics team, solving complicated problems that have an impact on the company's success. We offer a hybrid work schedule with generous benefits. This position will support growing initiatives in our Outbound Logistics functions. This is a terrific job for someone with experience and/or interest in domestic logistics. Our company uses its global supply chain to bring products to our warehouses and a sophisticated logistics operation to get those products to our customers quickly and efficiently. The logistics department is a critical piece of our company - and of today's international business world. Who is Hardware Resources? Hardware Resources is an industry-leading provider of cabinet hardware, cabinet accessories and kitchen cabinets. Across our six brands, we design, engineer, manufacture, and sell our decorative and functional hardware, cabinets, cabinet organizers, vanities, wood products, and LED lighting for the kitchen and bath. We enjoy an outstanding reputation for quality and service. Hardware Resources is headquartered in Bossier City, Louisiana, and our team members are valued and are encouraged to reach their full potential. We foster entrepreneurial spirit and imaginative teamwork with the freedom to act. Our company offers competitive wages, career growth opportunities, and a generous benefits package that includes PTO (sick time, paid vacation), holidays, 401(k), Employee Assistance Program, medical, dental, vision, and life insurance. What does a Logistics Coordinator do? The Logistics Coordinator will be responsible for championing and driving many daily operational initiatives within our growing domestic supply chain. The chosen candidate will be exposed to a variety of transportation modes, including ocean freight, intermodal, truck load, LTL, air freight, and small parcel. Domestic Transportation Responsibilities: Provide general oversight on all domestic customer deliveries, monitoring for service exceptions Route and manage assembled cabinet orders with our final mile freight provider Book and monitor internal product transfers ensuring lowest cost and fastest transit Monitor inbound and outbound shipments to ensure delivery schedule compliance Receive, investigate, and respond to all escalated customer inquiries regarding shipment service exceptions Assist warehouse teams with proper outbound routing for atypical shipments Other Responsibilities: Pursue and identify transportation cost reduction opportunities Review, validate, and approve carrier invoices within our freight audit program Required Knowledge and Skills: Must be a self-starter and inquisitive in nature Strong ability to multi-task, remain highly organized, and manage time efficiently Strong proficiency with Microsoft Excel (VLOOKUP's, pivots, etc.), Word, and PowerPoint Able to demonstrate problem solving methods to identify and correct root cause issues Able to facilitate cross functional initiatives in a teamwork environment Strong interpersonal and communications skills Ability to interpret analysis into sound decision making An interest in global supply chain and global business, we can teach you the function. This can be a great career entry point into global business Education and Employment Experience: Degree preferred, but applicable on-the-job experience will be considered Exposure to International and/or Domestic Logistics experience a plus Physical Requirements: Prolonged periods of sitting at a desk and working on a computer Must be able to lift up to 25 pounds at times Must be able to access all areas of the facility to determine needs Additional Information: No travel expected Performs other duties as assigned A post job offer drug screen and background check will be performed FSLA Status: Salaried Exempt Location: Dallas, TX

About Us Ventana designs, supplies, and installs high-performing curtain wall facade systems. By working closely with the design team, we can ensure a competitively priced facade that is water and air-tight and allows for optimal thermal control of the interior space. Traditionally, the facade is one of the major risk factors on any building, and the team at Ventana has a proven history of taking the risk and delivering superior facade systems that guarantee long-term performance. The Role We Want You For The Site Safety Supervisor will provide support to the Project Staff and the Ventana safety team in an effort to execute corporate safety and health standards and procedures in compliance with Federal, State, and Local requirements. In addition to your project responsibilities, you shall participate in and complete all assignments designated to you. This will include, but is not limited to, assisting in development of a zero injury safety culture on each project, conducting at least weekly documented jobsite safety inspections, effectively communicate orientations for all new project workers, assist with and review subcontractor daily pre-task safety analysis, actively promote and participate in daily stretch and flex program, identify project trends and execute proactive safety initiatives to eliminate incidents, support corporate goals and initiatives, emphasize and support proactive safety such as near miss/hazard reporting, coach and recognize workers on safe work methods, report all incidents in an effective and timely manner following established protocols and be a champion in motivating workers to perform their jobs safely! Your responsibilities will be all encompassing for each project you will be dedicated to. The Specifics of the Role Assist in development of the project safety program. Establish and conduct jobsite orientation for new project employees. Administer and record their participation in the orientation program and issue identification to those employees completing the orientation program. Attend all initial meetings with the project staff and subcontractor representatives to clearly define their role within the confines of the project safety program. Conduct and document pre-planning safety meetings with each subcontractor representatives to establish safety procedures prior to subcontractor's activity on site. Field tasks solo on a project Up to $80M. Client interfacing. Assist Site Safety Manager. Establish and conduct regular (weekly) safety meetings with subcontractor representatives and with project staff to ensure proper compliance. Facilitate training for site personnel and ensure that standards are per the OSHA\Clayco and in compliance with Federal and State standards. Ensure and maintain a log of each subcontractor toolbox safety meeting. Review each subcontractor's safety program and ensure that it meets or exceeds the project safety program requirements. Ensure that each subcontractor designates a safety representative that is properly trained in subcontractor's scope of work and has the proper authority to correct safety issues. Conduct regular daily and weekly jobsite inspections and complete the safety checklist noting safety violations and corrective actions. Record, notify and prepare written report of any violations or unsafe practices to subcontractors for immediate correction actions. Stop at once any violation or unsafe acts or practices. Assist the Project Superintendent in establishing and implementing proper fire prevention, evacuation, and fire control procedures. Investigate all incidents and generate proper reports. Establish and maintain all required safety records. Conduct a monthly overview safety meeting and attend project staff meetings to brief on safety issues. Perform other duties as necessary. Requirements Bachelor's Degree in Safety, Environmental Health & Safety, Occupational Health and Safety, or equivalent. 0-5 years of safety experience with a working knowledge of safety/environment principles and techniques. 2-3 years of field experience required. OSHA 30-hour construction accreditation. OSHA 500 Outreach Trainer is a plus. Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Occasionally lift and/or move up to 50 pounds. Able to work at heights, able to climb ladders, access/inspect scaffolding and roof areas. Noise level is usually moderate to very loud. Computer skills with familiarity with Microsoft Office. Physical Requirements Must possess the physical ability to safely navigate active construction sites. This may include but is not limited to climbing permanent and temporary stairs or ladders, using construction personnel hoists, ascending and descending ladders, and maneuvering through areas under construction. Use of personal protective equipment (PPE) may be required. Must be able to walk long distances, stand for extended periods without support, and work at various heights as required. Ability to access and inspect elevated areas such as scaffolding, rooftops, and other high structures. Possess sufficient visual acuity to perform essential job functions such as, close vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to occasionally lift and/or move items weighing up to 50 pounds. Exposure to varying noise levels ranging from moderate to high, which may require the use of personal protective equipment (PPE). Must be able to work in a variety of environmental conditions, including extreme heat, cold, rain, snow, and other unpredictable weather. Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! Why Ventana and Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.