Woodward jobs in Fort Collins, CO

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Supply Management/Purchasing Pay Range: ($33,639.00 - $50,458.00) Target Bonus: % Req ID: 27317 Summary Responsible for pulling, weighing, preparing and completing documentation for customer orders which are to be delivered by commercial trucker. Load/unload truck shipments. Warehouse received material and finished product in proper location. Support other departments to retrieve and replace inaccessible stock as needed. Key Deliverables Correctly pulled/boxed/prepared customer orders Work environment cleanliness, and organization No safety incidents or accidents Well maintained packaging and shipping supplies Key Accountability Metrics Satisfactory ISO and QC audits Monthly Customer Complaint Report Performance appraisals Key Responsibilities and Essential Functions 20% Pick and Pack Customer Orders Picks orders which are to be delivered by commercial trucker based on customer order and completes required documentation. Prepares pulled orders and places in holding area for truck pick up. 40% Load/Unload Shipments - Warehouse Material and Product Loads and unloads truck shipments received through Distribution. Follows proper procedure to handle deliveries in order to facilitate entry into Harris inventory system. Warehouses received materials and finished product in proper Manufacturing or Distribution areas, recording location on appropriate documentation. 20%Other Departments Support Aids other departments by pulling and replacing inaccessible stock using forklift. 5% Follow Safety Regulations Works safely and supports safety within their team across the organization - as required. Participates in safety training and demonstrates a high regard for safety at all times. Wears PPE as required by safety regulations. 5% Maintain Quality Maintains quality by verifying that pulled product, packaged or not, meets Deliveries requirements and work procedures. 5% Complete Documentation Completes the following forms/reports as required by department procedures: • Deliveries • Returned Goods Authorization • Daily 5S Check Sheet • Daily Forklift Inspection • Packaging/Shipping Supplies Checklist • Packing List on incoming shipments 5% Support Department and Company Initiatives Works on cost saving projects, Six Sigma projects, and provides support for other team members and projects. Attends team meetings. Utilizes lean tools and techniques such as 5S and visual factory concepts in maintaining order and cleanliness. Performs additional tasks to support production as needed or directed by supervisor or management. Education and/or Experience Required - 2 or more years of related work experience and High school diploma or GED or equivalent combination of education and experience. Preferred - Experience related to distribution; some computer knowledge; forklift license. Core Competencies Required from Employees Maintains a Customer Focus - Demonstrating exceptional service to both internal and external customers giving high priority to understanding and satisfying the customer. Takes Ownership - Demonstrates a continuous drive to achieve superior results and takes responsibility for those results. Is a Team Player - Has the ability to collaborate effectively with others to achieve common goals. Recognizes situations in which team members need to work together to solve work tasks at hand. Uses Sound Judgment / Integrity - Takes action that is well-reasoned, which represents the best interest of the business. Achieves Quality Results - Flawlessly executes on objectives to ensure the long- term success of the organization. Key Knowledge, Skills, Abilities, and Qualities Required Qualities and Skills Initiative, flexibility, responsibility and independence, ability to multi-task, goal-oriented, teamwork, excellent communication skills, ability to handle projects of varying scope, attention to detail, respectful of others, and willing to share expertise with others. Language Skills Ability to read and interpret documents such as safety rules, specific customer requirements, procedures. Ability to communicate effectively with coworkers Mathematical Skills Ability to work with basic mathematical concepts. Reasoning Ability Ability to define problems collects data, establish facts, and draw valid conclusions. Ability to interpret technical instructions. Physical Demands of Position - See Physical Demands Form Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

ARE YOU A CURRENT US FOODS EMPLOYEE? PLEASE APPLY DIRECTLY THROUGH OUR INTERNAL WORKDAY CAREER SITE Join Our Community of Food People! BASIC PURPOSE To provide a safe and reliable fleet by performing preventative maintenance and proper repairs on all fleet equipment. Reefer Mechanic will be responsible for the troubleshooting, repair and maintenance of the Fleet road equipment including tractor, trailer, thermo-king, converter dolly and maintenance vehicles. Ensure compliance with all State and Federal trucking regulations. Reefer Mechanics will also be responsible for the documentation, completion, and to keep current the maintenance logs for all repairs and parts used daily. Our Reefer Diesel Mechanics Technicians start at $36.50 Reefer Mechanics earn clean and safe shop bonuses, uniform allowance, tool allowance, and continuous growth and training opportunities! We help you make it! US FOODS is one of the largest food distributors with a culture and history of promotion from within, excellent training programs, a continuous improvement focus. Schedule: Sunday -Thursday Third Shift ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel reefer equipment (THERMO KING & CARRIER TRAILER REFRIGERATION SYSTEMS, Reefer Microprocessors, etc.). Perform preventative maintenance within manufacturer standards. Mentor other maintenance shop personnel. Receive road calls, assign third party vendor, and work with business partners on plan of action. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines. Willingness and capacity to assume increased responsibility and certifications. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager. External: Dealer Service Managers. WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a Fleet Reefer/Refrigeration technician. TK/Carrier Refrigeration Certifications. Must be willing to travel and attend training provided by US Foods. Diagnostic and troubleshooting competency relating to reefer equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Must furnish own personal hand tools. Ability to read and understand technical and online service manuals. EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING EPA 608 (Type 2 or Universal) & EPA 609 Certifications LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Ability to comply with EPA and OSHA & DOT regulations as pertaining to the shop and fleet. Computer and software experience/ Noregon Diag Equip/A/C Recovery, Etc. Able to repair and overhaul warehouse equipment. Welding ability Valid Class A CDL license and DOT certification PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Your efforts are the foundation that defines US FOODS success based on our pillars of cultural beliefs, work ethic, collaborative spirit, and service. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $36.50 - 40 As applicable, this role will also receive overtime compensation, incentive compensation based on productivity and quality, Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ********************************************** Stay updated by following US Foods on any of our social media platforms at the bottom of the page! ***EOE - Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status***

Provide sales and marketing support as assigned to meet region goals. This activity will be done using all principles of good salesmanship, including personal client visits, telephone selling, group selling plus participation in technical and professional associations. Responsible for developing proposals for the Company services in conjunction with the Operations Department staff and corporate staff. Responsibilities: Perform sales support to consistently meet overall area sales goals. Make regular sales calls on existing major accounts and establish contact with new accounts. Make effective customer presentations, proposal pricing is accurate and technically correct. This may include walk-through customer site, and field visits. Perform marketing support to promote the Company's image throughout the industry. Implement area-marketing plan on a monthly basis. Assist Corporate needs in new service assessments, marketing research and literature development. Perform public relations to promote sales. Active participation in trade shows and professional societies. Give effective presentations for the Company's Training Services and Speaker's Bureau. Member of the Area Management Committee. Actively participate as a committee member. Assist in the development of the area sales and marketing plan. Bring input and new ideas on Sales and Marketing activities. Competencies: To perform the job successfully, an individual should demonstrate the following competencies: Customer Focus- Is dedicated to meeting the expectations and requirements of internal and external customer; Gets first-hand customer information and uses it for improvements in products and services; Acts with customers in mind; Establishes and maintains effective relationships with customers and gains their trust and respect. Drive for Results- Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom line oriented; steadfastly pushes self and others for results. Interpersonal Savvy - Relates well to all kinds of people, up, down and sideways, inside and outside the organization; builds appropriate rapport; listens; builds constructive and effective relationships; uses diplomacy and tact; truly values people; can diffuse tension. Listening- Practices attentive and active listening; has the patience to hear people out; can accurately restate the opinions of others even when he/she disagrees. Negotiating- Can negotiate skillfully in tough situations with both internal and external groups; can settle differences with minimum noise; can win concessions without damaging relationships; can be both direct and forceful as well as diplomatic; gains trust quickly. Time Management- Uses his/her time effectively and efficiently; sets priorities; values time; separates the critical few from the trivial many and concentrates his/her efforts accordingly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements: Regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear, and smell. Frequently required to sit, climb, and balance. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation and the ability to adjust focus. Regularly lift and/or move up to 25 pounds and frequently lift and/or move 100-pound test sets. Valid Driver's License. Education/Experience: Graduate engineer (BSEE/BSME) and no experience. OR Graduate of electrical technical school or equivalent, and five years of similar work. OR High school diploma or equivalent and eight years of similar work. Willing to work flexible hours, weekends, some overnight travel to cover sales territory. Regularly required to sit, stand, walk, use hands and fingers, talk and hear. Required to sit and work at computer. Specific vision abilities required by this job include close vision and the ability to adjust focus. Conduct walk-through of construction sites and work in and around electrical equipment. Valid Driver's License required. PHYSICAL REQUIREMENTS No physical requirements ENVIRONMENTAL DEMANDS N/A TRAVEL TIME REQUIRED 50% The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. The anticipated salary range for this role in the Colorado locality is between $87,595 to $120,000 per year plus Sales Incentive Plan. - salary ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process. The estimated deadline to submit an application for this role is December 31, 2025, the company may need to extend the deadline based off the needs of the business and open role. If an extension is needed, the date will be updated accordingly. #ERS #LI-HR1

. Assist in administration and adherence to company policies and procedures, and resolution of employee relation issues. Assist managers and supervisors with disciplinary issues. Recruit job openings, and interview candidates. Conduct required training, employee investigations and I-9 audits. Provide assistance with managing unemployment claims, appeals and hearings. Ensure compliance with state and federal employment law. Compile and analyze turnover, retention, and absenteeism data, assisting HR Manager in developing and implementing retention and attendance procedures and plans. Compile and distribute HR reports as needed. All other relevant duties as assigned. High School Diploma required; Bachelor Degree or equivalent in HR, Business or other closely related field preferred. 2+ years HR and employee relations experience; preferable within a similar manufacturing environment. Excellent communication and interpersonal skills. Working knowledge of federal and state employment law (i.e., Title VII, EEOC, ADAA, FMLA, etc.). Excellent conflict resolution skills. Strong technology and computer skills. Organized with attention to detail.

ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Perform preventative maintenance within DOT standards. Receive road calls, assign third party vendor, and work with business partners on plan of action. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and certificates. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: Vendor service providers when required WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting competency relating to equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Prior experience in administering appropriate PM program. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING N/A LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class-A CDL license and DOT certification Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $33-$36per hour. This role will also receive overtime compensation Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Macomb Employment Status: Hourly Full-Time Function: Quality Assurance/Control Req ID: 26199 Job Responsibilities PRIMARY FUNCTION Quality Assurance is a vital part of any aerospace operation as it ensures that all operations are conducted in a safe and reliable manner. The candidate must be able to identify any potential issues or risks that could compromise safety, performance, or reliability and take appropriate corrective action. Experience in auditing, inspection, and testing procedures is essential for success in this role. Possessing these skills and qualifications, a Quality Assurance Engineer can help to ensure the highest quality standards are met here at Baker Industries. JOB DUTIES AND RESPONSIBILITIES Documenting and reporting product or service quality levels Developing a workflow or AS9102 Form 3 for product inspection Following up with the appropriate channels when mistakes are found Evaluating adequacy of Quality Assurance standards Devising sampling procedures and directions for recording and reporting quality data Reviewing the implementation and efficiency of quality and inspections systems Investigating customer complaints and non-conformance issues Collecting and compiling statistical quality data Analyzing data to identify areas for improvement in the quality system (Continuous Improvement) Developing, recommending, and monitoring corrective and preventive actions Preparing reports to communicate results of quality inspection activities to management Monitoring risk management activities Assuring ongoing compliance with quality and industry regulatory requirements Prioritizing work and meeting deadlines Recognizing and maintaining the confidentiality of all materials in the work setting. Possessing a keen eye for detail with excellent attention to detail The ability to consistently identify mistakes across thousands of inspections characteristics, closely follow International Quality Standards as well as customer requirements, read and interpret engineering drawings and specifications. Use problem-solving skills to identify potential issues with a product and propose solutions to fix them. Ability to effectively communicate with and work in teams. . Additional job duties as assigned EDUCATION AND EXPERIENCE Proven work experience as a Quality Assurance Engineer or DSQR. Relevant training, experience, and/or certifications as a Quality Assurance Engineer. Experience with flight hardware is a must. Working knowledge of AS9100, AS9102, AS13100, ISO 9001, and other relevant quality standards. Must have strong computer skills, including Microsoft Office and databases. Experience with DISCUS is a plus. Working knowledge of tools, methods, and concepts of quality assurance. High school diploma/GED, prior certification as a DSQR for any Aerospace Prime contractor, or equivalent work experience. Job Requirements PHYSICAL DEMANDS The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EXPORT CONTROL DISCLAIMER This position will include access to data, technology, and/or software source code that is subject to U.S. export controls under International Traffic in Arms Regulations (ITAR). Employment with The Lincoln Electric Company (D/B/A Baker Industries) is contingent upon either verifying U.S. person status or obtaining any necessary authorizations. Applicants will be required to answer certain questions for export control purposes and information will be reviewed by compliance personnel to ensure compliance with federal law. The Lincoln Electric Company, at its sole discretion, may choose not to apply for a license for such individuals as whose access to export-controlled data, technology, and/or software source code may require authorization. The Lincoln Electric Company may also decline to proceed with an applicant on this basis alone. EQUAL OPPORTUNITY EMPLOYER The Lincoln Electric Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Baker Industries complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status, or disability. HARASSMENT POLICY The Lincoln Electric Company expressly prohibits any form of workplace harassment based on race, color, religion, gender, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Baker Industries' employees to perform their job duties may result in discipline up to and including discharge. DISCLAIMER This job description may not include all assigned duties, responsibilities, or aspects of the job described, and may be modified at any time at the Employer's sole discretion. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Use Your Power for Purpose Summarize the primary purpose & key accountabilities of the role, including geographical scope (i.e. Global vs. Country/Region). Summary should be concise and include strategic information that would attract candidates to the role. It may be helpful to complete this section after you have finished the other sections of the document. The CQ Senior Analytical Scientist, functions as a Subject Matter Expert for areas of evaluation of testing methods, including but not limited to internal test methods, compendia methods, and implementing updates of test methods for improvement through Global Quality Tracking System (QTS) and PDOCS change control process. The role requires interactions with colleagues within the Rocky Mount site as well as external colleagues within and outside the Pfizer organization. What You Will Achieve In this role, you will: Contribute to and influence goals at the work group or project team level Manage time effectively and develop short-term work plans Apply technical skills and knowledge proactively in projects Make decisions to resolve moderately complex problems and receive instructions on complex issues Work under limited supervision with periodic review Develop scientific activities and projects to support team goals and provide mentoring within the team Conduct testing on clinical and commercial products, raw materials, validation, and stability Train junior colleagues, develop training plans, and oversee training activities for groups Support audits, review technical content for compliance, and design protocols for test method transfer and validation Collaborate with co-workers, customers, and management to gather input, suggest continuous improvements, and seek external resources to enhance scientific understanding Here Is What You Need (Minimum Requirements) BA/BS with at least 9 years of experience or MBA/MS with at least 7 years of experience or PhD/JD with any years of experience Proficiency in handling current MS Office Applications Excellent written and verbal communication skills Strong interpersonal abilities Solid understanding of US, EU, and ROW cGMP & GLP Experience with analytical lab equipment Good knowledge of statistical software such as JMPTM and MinitabTM Bonus Points If You Have (Preferred Requirements) Familiarity with Lean Six Sigma concepts, Lean Labs Experience with project management tools, including stakeholder management Strong problem-solving skills Ability to work collaboratively in a team environment Excellent organizational and time management skills Experience in a leadership role within a laboratory setting Knowledge of regulatory requirements and quality standards Ability to mentor and develop junior team members PHYSICAL/MENTAL REQUIREMENTS Stand up for up to 8 hours, sit for up to 8 hours, walking, climbing stairs, responding to visual warning indicators, respond to audible warning indicators, respond to color or special visual indicators, wear specialized protective clothing (lab coat, safety glasses, gloves, face shield/goggles, apron), repetitive use of upper extremities. Can perform mathematical calculations and complex data analysis. NON-STANDARD WORK SCHEDULE, TRAVEL OR ENVIRONMENT REQUIREMENTS There are no out of the ordinary travel or shift requirements associated with the position. Individual will be expected to work nonstandard schedule as needed to support the business objectives Work Location Assignment: Hybrid Last Date To Apply: December 19. 2025 The annual base salary for this position ranges from $80,300.00 to $133,900.00. In addition, this position is eligible for participation in Pfizer's Global Performance Plan with a bonus target of 10.0% of the base salary. We offer comprehensive and generous benefits and programs to help our colleagues lead healthy lives and to support each of life's moments. Benefits offered include a 401(k) plan with Pfizer Matching Contributions and an additional Pfizer Retirement Savings Contribution, paid vacation, holiday and personal days, paid caregiver/parental and medical leave, and health benefits to include medical, prescription drug, dental and vision coverage. Learn more at Pfizer Candidate Site - U.S. Benefits | (uscandidates.mypfizerbenefits.com). Pfizer compensation structures and benefit packages are aligned based on the location of hire. The United States salary range provided does not apply to Tampa, FL or any location outside of the United States. Relocation assistance may be available based on business needs and/or eligibility. Sunshine Act Pfizer reports payments and other transfers of value to health care providers as required by federal and state transparency laws and implementing regulations. These laws and regulations require Pfizer to provide government agencies with information such as a health care provider's name, address and the type of payments or other value received, generally for public disclosure. Subject to further legal review and statutory or regulatory clarification, which Pfizer intends to pursue, reimbursement of recruiting expenses for licensed physicians may constitute a reportable transfer of value under the federal transparency law commonly known as the Sunshine Act. Therefore, if you are a licensed physician who incurs recruiting expenses as a result of interviewing with Pfizer that we pay or reimburse, your name, address and the amount of payments made currently will be reported to the government. If you have questions regarding this matter, please do not hesitate to contact your Talent Acquisition representative. EEO & Employment Eligibility Pfizer is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status. Pfizer also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as work authorization and employment eligibility verification requirements of the Immigration and Nationality Act and IRCA. Pfizer is an E-Verify employer. This position requires permanent work authorization in the United States. Pfizer endeavors to make ********************** accessible to all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process and/or interviewing, please email disabilityrecruitment@pfizer.com. This is to be used solely for accommodation requests with respect to the accessibility of our website, online application process and/or interviewing. Requests for any other reason will not be returned. Quality Assurance and Control

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 27763 Job Responsibilities Build Mechanical sub-assemblies, final assemblies and any other Mechanical task for the job. Follow safety procedures/ training as outlined and identified by Fori Automation management, MIOSHA, and OSHA. Complete as required in process QC check sheets. Complete as required QC audits. Assure good craftsmanship on jobs that are being built. Follow good housekeeping practices. Take direction from Leader and/or Supervisor Provide feedback on job status to Mechanical Assembly Leader. Know and understand due dates for jobs and schedule work accordingly. Follow-up with supervisor on daily basis to report progress of job(s) being worked on. Assist in disassembly, packing and loading of machines for shipment. Fill-in where required for absences. Order material and follow-up with receiving when required. Assist in start-up/de-bug of equipment. Recommend as appropriate work methods and/or materials that will improve existing designs. Travel as needed to assist in installations, de-bug, tryout, or problem solving at customer locations. Read and interpret build prints. Work with Mechanical Engineers and build Leaders to correct any problems with design of the machine/controls. Recommend, initiate, and follow-up as needed on engineering changes and document according to ECO procedures. Work on continuous improvement projects as needed. Support special assignments as needed. Provide training and assistance to new employees. Job Requirements High School Diploma required 5 years experience as a Machine Builder Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Company: US3090 Sygma Illinois (The Sygma Network, Inc) Sales Territory: None Zip Code: 61834 Travel Percentage: 0 Compensation Range: $10.00 - $48.00 The compensation range provided is in compliance with state specific laws. Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors. You may be eligible to participate in the Company's Incentive Plan. BENEFITS INFORMATION: For information on Sysco's Benefits, please visit ************************* Are you looking for a place to call home? Stability? A Career? Come join the SYGMA Danville, IL Team and get paid what you're worth. Our Delivery Drivers run 2-4 routes per week, and average $94-97K per year. At SYGMA we value our people and take pride in offering our customers the best service in the industry. We place an emphasis on teamwork and are known for developing our top internal talent. Offering Paid Training and Top Earning potential. Our Formula to Success is simple Route Pay + Bonuses = SYGMA Top Dollars. JOB SUMMARY To serve our customers by safely and efficiently transporting products from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading products according to customer invoices and company standards. Top Earners Make Up to $180,000! Highly Maintained Equipment - all automatics 10 Paid Holidays! Medical, Dental and Vision Insurance Benefits active on the 1st of the month after 31 days of employment. 401k and Sysco Stock Purchase Plan Drive both team and single routes Evening Dispatch, Sunday - Friday The More You Drive; The More You Earn! RESPONSIBILITIES: Unloads product from trailer, by hand or using a hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g., handling product according to preferred work methods, scanning product as it is delivered into the store). Ensures all paperwork is completed according to established company and governmental guidelines (e.g., DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre- and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly). Ensures all food safety protocols are met according to established guidelines (e.g., proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard. Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication. Other duties as assigned by Management. REQUIRED MINIMUM EDUCATION/EXPERIENCE: High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma. CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS: Valid Class A Commercial Driver's License. Must be insurable to operate a vehicle as a condition of initial and continued employment. KNOWLEDGE, SKILLS, AND ABILITIES: Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices. Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering products. Ability to: drive a tractor-trailer unit both in the day and at night, remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart Perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems. Ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to sit, talk, and hear. The associate is frequently required to lift, push, or move product that weighs up to 50 pounds by hand and push/pull up to 250 pounds of product with a 2-wheeled hand cart down a ramp and into the customer's storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounter while performing the essential functions of the job. While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required to successfully meet customers' needs. The associate is occasionally exposed to high, precarious places, fumes, or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required to successfully meet customers' needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This supersedes prior s. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco's Benefits, please visit ************************* HOW WE PROTECT OUR ASSOCIATES COVID-19 Precaution(s): Personal protective equipment and masks provided Temperature screenings Social distancing guidelines in place Sanitizing, disinfecting, and cleaning procedures in place OVERVIEW: Sysco is the global leader in foodservice distribution. With over 57,000 associates and a fleet of over 13,000 vehicles, Sysco operates approximately 326 distribution facilities worldwide and serves more than 625,000 customer locations. We offer our associates the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates. OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Build your best future with the Johnson Controls team As a global leader in smart, healthy and balanced buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary and commission Paid vacation/holidays/sicktime - 15 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Extensive product and on the job/cross training opportunities With outstanding resources Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Company vehicle Check us out: A Day in a Life at Johnson Controls A Day in a Life at Johnson Controls | Sales Roles What you will do Our continued growth has produced a need for a dedicated Life Safety FIRE Service Sales Representative - Fire Sprinkler to join our team. In this challenging and rewarding role the responsibilities will include expertly representing the Company with respect to the promotion and sale of Fire Sprinkler service offerings to various customers and end users within assigned territory and accounts. How you will do it Establish contact with prospects and qualify potential buyers of new construction and service contracts by scheduling sales calls, following up on leads and using outlined marketing strategies. Determine customer needs and develop a sales strategy to gain customer understanding of company service offerings. Close sufficient sales to exceed sales plan objectives. Familiar with reading blueprints, understanding current NFPA 13 standards and local codes. Develop a positive ongoing relationship with customers, general contractors and end users. Estimate small projects including day-works as required. Ability to build new business associations / relationships and grow the Sprinkler Service Business. What we look for Two years Sales experience in a similar industry preferred. Previous sprinkler design experience, including estimating and performing hydraulic calculations preferred. Self-motivated with a strong desire to succeed. Proven ability to work effectively with minimal supervision. Technical knowledge of sprinkler systems preferred. Exceptional presentation, verbal and written communication skills. Ability to multi-task and organize work. Proficient in the use of personal computers to include operating systems such as Windows Office 2007. Ability & willingness to work as a team player; must be able to work well with others. #SalesHiring HIRING SALARY RANGE: $70,000 - $95,000 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This role also offers a competitive Sales Incentive Plan that will take into account project, quarterly, and annual margin. This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at About us - Johnson Controls Careers

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $22.51-$29.00 Target Bonus: 5.0% Req ID: 26396 Job Responsibilities Take direction from Leader and/or Supervisor Provide training and assistance to new employees. Provide feedback on job status to Electric/Pneumatic Assembly Supervisor. Assist in start-up/de-bug of equipment. Assure good craftsmanship on jobs that are being built. Follow and enforce good housekeeping practices with all department personnel. Know and understand due dates for jobs and schedule work accordingly. Work with Controls Engineers to correct any problems with design of the machine/controls. Recommend as appropriate work methods and/or materials that will improve existing designs. Travel as needed to assist in installations, de-bug, tryout, or problem solving at customer locations. Follow-up with supervisor on daily basis to report progress of job(s) being worked on.. Recommend, initiate, or follow-up on engineering changes and document according to procedure(s). Assist in packing and loading of machines for shipment. Fill-in where required for absences. Order material and follow-up with Receiving when required. Must know how to read and interpret build prints. Job Requirements Education: High School Diploma required. Journeyman's card or Journeyman status preferred Experience: 5 years minimum experience as industrial pipefitter Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Macomb Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 26773 Job Responsibilities We are seeking a highly skilled Senior CMM Programmer to join our innovative manufacturing team. In this pivotal role, you will be instrumental in developing and optimizing complex coordinate measuring machine (CMM) programs to ensure precision and quality in our manufacturing processes. You will leverage your extensive expertise in metrology to drive product excellence and contribute to our mission of delivering top-tier solutions. In addition to performing the calibration of the coordinate measuring machine, you will also use precise measurement tools, such as calipers and micrometers, to ensure our products meet our customer and internal standards. Applicants need to be able to read blueprints and interpret GD&T (geometric dimensioning and tolerancing) symbols, so some technical training or professional experience is preferred. What You Will Do Interpret internal and customer engineering drawings to determine inspection requirements. Create and edit CMM programs to support part inspection and validation. Perform CMM setups, including managing multiple setups simultaneously and optimizing table space. Select appropriate measuring instruments based on blueprint specifications. Execute dimensional inspections using CMM programs and manual measurement tools. Apply GD&T principles to conduct detailed part inspections. Ensure inspection programs align with part numbers and revision levels. Complete dimensional reports for PPAP and AS9102 submissions. Conduct first article, in-process, and final inspections using hand gauges and measurement systems. Perform incoming goods inspections as needed. Accurately log and maintain inspection data for traceability and reporting. Support and uphold AS9100 quality objectives and procedures. Identify and segregate non-conforming parts, ensuring proper labeling and documentation. Maintain high standards of workmanship using only approved data, materials, and tools. Problem-Solving & Communication Skills Use analytical skills to identify product issues, determine root causes, and implement corrective actions. Troubleshoot defects and verify the effectiveness of repairs. Proactively address production delays by identifying causes and proposing preventive solutions. Communicate inspection findings clearly to team members and management. Collaborate effectively within cross-functional teams to support continuous improvement. Education and Experience Required High school diploma/GED, prior certification as a PC-DMIS CMM Programmer, OR equivalent work experience. 3+ years of relevant experience. Proven experience in CMM programming (PC-DMIS and/or Verisurf). Strong understanding of metrology and dimensional inspection techniques. Ability to read and interpret blueprints and GD&T symbols. Technical training or equivalent professional experience in a manufacturing or quality control environment. Experience with flight hardware is a must. Working knowledge of AS9100, AS9102, AS13100, ISO 9001, and other relevant quality standards. Must have strong computer skills, including Microsoft Office and databases. Ability to work independently and manage multiple priorities. Job Requirements PHYSICAL DEMANDS The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. EXPORT CONTROL DISCLAIMER This position will include access to data, technology, and/or software source code that is subject to U.S. export controls under International Traffic in Arms Regulations (ITAR). Employment with The Lincoln Electric Company (D/B/A Baker Industries) is contingent upon either verifying U.S. person status or obtaining any necessary authorizations. Applicants will be required to answer certain questions for export control purposes and information will be reviewed by compliance personnel to ensure compliance with federal law. The Lincoln Electric Company, at its sole discretion, may choose not to apply for a license for such individuals as whose access to export-controlled data, technology, and/or software source code may require authorization. The Lincoln Electric Company may also decline to proceed with an applicant on this basis alone. EQUAL OPPORTUNITY EMPLOYER The Lincoln Electric Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Baker Industries complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status, or disability. HARASSMENT POLICY The Lincoln Electric Company expressly prohibits any form of workplace harassment based on race, color, religion, gender, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Baker Industries' employees to perform their job duties may result in discipline up to and including discharge. ATTENTION: THIRD-PARTY RECRUITERS Lincoln Electric does not accept unsolicited resumes from third-party recruiters. Resumes submitted to any employee(s) of Lincoln Electric without a signed vendor agreement, by the Manager of Recruiting & Training, will become the property of Lincoln Electric. Verbal or written commitments from any other member of Lincoln Electric will not be considered binding terms. Lincoln Electric will not pay a fee to any third-party recruiter that has not coordinated their recruiting activity through the Recruiting Department. DISCLAIMER This job description may not include all assigned duties, responsibilities, or aspects of the job described, and may be modified at any time at the Employer's sole discretion. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

HIRING FOR 2ND AND 3RD SHIFTS. 2ND SHIFT WORK HOURS TYPICALLY 4 PM TO 1AM. 3RD SHIFT WORK HOURS TYPICALLY 11 PM TO 8AM. Maintain, repair, and perform evaluations and preventative and predictive maintenance on refrigeration systems according to PM List and instructed by leadership. Monitor system performance. Replace components within the refrigeration's system, with safe LOTO procedures and in accordance with PSM program. Troubleshoot equipment and recommend corrective action. Complete work orders and PMs ensuring all performed work is logged into the computerized maintenance management system (CMMS) (APSM) daily. Operate, maintain and troubleshoot ammonia refrigeration compressors, condensers, pumps, vessels, re-circulators, purgers, evaporators, valves, etc. All other relevant duties to the job. RETA 1, or equivalent industrial ammonia refrigeration training such as Stellar, Frick, Lanier/GCAP, or employer training program 1+ year experience operating and maintaining Ammonia Refrigeration systems required. 1+ year experience with electrical low and high voltage circuits required. Strong math skills and technically savvy.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Employment Status: Salary Full-Time Function: Engineering Req ID: 27246 Summary Lincoln Electric is seeking a highly skilled Project Manager to support our Red Viking subsidiary based in Plymouth, MI. This role is responsible for leading complex, high-visibility projects that require significant resources, cross-functional collaboration, and seamless integration across teams. The Project Manager will drive initiatives from concept through final implementation, ensuring quality, budget, and schedule adherence while maintaining strong stakeholder alignment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more. Key Responsibilities Lead projects through the full lifecycle: initiation, planning, execution, monitoring, control, and closure. Define project scope, objectives, deliverables, and success criteria while aligning team members to roles and responsibilities. Develop detailed project schedules, allocate resources, and manage risks to ensure timely and cost-effective completion. Coordinate cross-functional efforts with engineering, manufacturing, procurement, testing, quality, distributors, vendors, and end users. Ensure strict compliance with quality standards; review and approve final project deliverables. Provide regular updates to executive leadership and business unit leaders on project progress, risks, and outcomes. Manage and maintain financial tracking tools including Gross Margin, Operating Profit, Backlog, SG&A, and other key financials. Utilize advanced Excel skills to create and troubleshoot formulas, build reports, and support executive-level reporting. Leverage ERP systems for project tracking, reporting, and ensuring data integrity across business functions. Lead and mentor a team of project engineers, staff engineers, and manufacturing professionals to achieve technical and operational goals. Prepare clear documentation, presentations, and reports for both internal and external stakeholders Required Experience & Education Education: Bachelor's degree in Engineering, Technical Discipline, or Business Administration (with strong technical design and execution background). Experience: 7-10+ years of project management experience in a manufacturing environment. Proven background in advanced capital equipment design, build, and installation (scheduling, procurement, manufacturing, testing, and quality). PMP certification strongly preferred. Project Leadership: Demonstrated success managing scope, budgets, schedules, personnel, and materials within complex organizations. Technical Knowledge: ERP systems experience for project management and reporting. Proficiency with Excel (advanced formulas, financial tracking, reporting). Familiarity with ISO 9001, ISO 14001, ISO 17025, or equivalent standards. Soft Skills: Strong leadership, influence, and negotiation abilities. Excellent written, verbal, and presentation communication skills. High attention to detail and documentation accuracy. Other Requirements: Supervisory experience managing technical professionals. This person will work very closely with a team of project engineers, staff engineers, and manufacturing professionals on a daily basis. Willingness to travel up to 20%. U.S. Citizen or Permanent Resident (ITAR compliance required). Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

JOIN TEAM TRILOGY: At Trilogy, you'll experience a caring, supportive community that values each team member. We prioritize meaningful relationships, genuine teamwork, and continuous growth. With the stability of long-term care, competitive pay, and exceptional benefits, Trilogy offers a work environment where you're supported, appreciated, and empowered to thrive in your career. If you're ready to join a team committed to your success, Trilogy is where you belong and thrive! WHAT WE'RE LOOKING FOR: The Qualified (Certified) Medication Aide (QMA or CMA) assists with administering medications to residents as directed by the physician, nurse supervisor, and Director of Nursing (DON). Additionally, this role assists residents with activities of daily living. Key Responsibilities The Qualified (Certified) Medication Aide sets up, administers, and records certain prescribed medications for residents in the facility under the supervision of a licensed nurse and as allowed by State regulatory agencies. Practice the five rights of medication administration within the scope of your role. Assist residents with activities of daily living as needed. Properly label, store, receive and destroy medication per company policy. Perform medication charting as directed by the Nurse Supervisor/Charge Nurse. Qualifications Certified as a Qualified Medication Aide (QMA) or Certified Medication Aide (CMA) by the state and maintain a Certified Nursing Assistant (CNA) Certification in good standing with the state. 0-1 years of relevant experience preferred WHERE YOU'LL WORK : Location: US-IN-Elkhart LET'S TALK ABOUT BENEFITS: Our comprehensive Thrive benefits program focuses on your well-being, offering support for personal wellness, financial stability, career growth, and meaningful connections. This list includes some of the key benefits, though additional options are available. Medical, Dental, Vision Coverage - Includes free Virtual Doctor Visits, with coverage starting in your first 30 days. Get Paid Weekly + Quarterly Increases - Enjoy weekly pay and regular quarterly wage increases. Spending & Retirement Accounts - HSA with company match, Dependent Care, LSA, and 401(k) with company match. PTO + Paid Parental Leave - Paid time off and fully paid parental leave for new parents. Inclusive Care - No-cost LGBTQIA+ support and gender-affirming care coordination. Tuition & Student Loan Assistance - Financial support for education, certifications, and student loan repayment. GET IN TOUCH: Demond ************** APPLY NOW: Since our founding in 1997, Trilogy has been dedicated to making long-term care better for our residents and more rewarding for our team members. We're proud to be recognized as one of Fortune's Best Places to Work in Aging Services, a certified Great Place to Work, and one of Glassdoor's Top 100 Best Companies to Work. At Trilogy, we embrace who you are, help you achieve your full potential, and make working hard feel fulfilling. As an equal opportunity employer, we are committed to diversity and inclusion, and we prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. NOTICE TO ALL APPLICANTS (WI, IN, OH, MI & KY): for this type of employment, state law requires a criminal record check as a condition of employment.

Responsible for oversight of the refrigeration technicians on all three shifts (1st, 2nd, & 3rd). Ensure proper upkeep and function of PSM Program. Plan, organize and manage manpower ensuring safe and efficient operation and compliance of plant equipment. Oversee and lead assigned refrigeration team members. Ensure safe and efficient operation of all refrigeration, boilers and chemical equipment through administration of preventive maintenance program. Ensure equipment is in working order. Oversee work quality and completion of tasks, ensuring standards and specifications are met. Assist and coach technicians to troubleshoot problems. Ensure regulatory compliance relating to hazmat, PSM, health & safety, environmental standards and equipment operations. Participate in compliance audits, process hazard analysis (PHA) audits, and five-year mechanical integrity audits. All other relevant duties to the job. In depth knowledge in all aspects of refrigeration (i.e., pneumatics, plumbing, electricity, hydraulics, general refrigeration equipment, etc.) required. Ammonia System Certification preferred. Ability to be on-call and available to work as needed across all three shifts (1st, 2nd, and 3rd). 2+ years supervisory and/or leadership experience required. Hands-on experience with refrigeration systems, boilers, high pressure water systems and PSM required. Knowledge of refrigeration operations within poultry or similar industry preferred. Knowledge and practical experience with computers, and relative software.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Macomb - Mile Req ID: 27991 Job Responsibilities PRIMARY FUNCTION Work in coordination with the Manager and other coworkers to ensure that all jobs are welded to the specifications of each job and meets the outlined requirements. JOB DUTIES AND RESPONSIBILITIES Operating equipment using safe work habits. Inspect welds and work pieces to acceptance of the standard they are working to. Measure work pieces with straight edges, tape measure, scale, or templates to ensure proper fit. Weld steel, stainless steel, aluminum, invar or other specified alloys per their qualifications and the applicable WPS. Clamping, holding, tack-welding, bracing, grinding or bolting component parts to obtain required configurations and positions for welding. Maintains safe operations by adhering to safety procedures and regulations. Lift or move materials and finished products using overhead cranes / hi-lo Able to read drawings and weld symbols Maintains continuity among work shifts by adhering to required documentation and communicating actions, irregularities, and continuing needs. Other duties as assigned EDUCATION AND EXPERIENCE High school diploma/GED, certificate in Machine Tool Technology or equivalent work experience Job Requirements PHYSICAL DEMANDS - Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. WORK ENVIRONMENT - Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. Export Control Disclaimer: This position will include access to data, technology, and/or software source code that is subject to U.S. export controls under International Traffic in Arms Regulations (ITAR). Employment with The Lincoln Electric Company (D/B/A Baker Industries) is contingent upon either verifying U.S. person status or obtaining any necessary authorizations. Applicants will be required to answer certain questions for export control purposes and information will be reviewed by compliance personnel to ensure compliance with federal law. The Lincoln Electric Company, at its sole discretion, may choose not to apply for a license for such individuals whose access to export-controlled data, technology, and/or software source code may require authorization. The Lincoln Electric Company may also decline to proceed with an applicant on this basis alone. EQUAL OPPORTUNITY EMPLOYER -The Lincoln Electric Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Baker Industries complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. ATTENTION: THIRD-PARTY RECRUITERS -Lincoln Electric does not accept unsolicited resumes from third-party recruiters. Resumes submitted to any employee(s) of Lincoln Electric without a signed vendor agreement, by the Manager of Recruiting & Training, will become the property of Lincoln Electric. Verbal or written commitments from any other member of Lincoln Electric will not be considered binding terms. Lincoln Electric will not pay a fee to any third-party recruiter that has not coordinated their recruiting activity through the Recruiting Department. DISCLAIMER -This position may have access to various types of Controlled Unclassified Information (CUI) and/or information and tangible items subject to U.S. export controls, as well as be subject to certain customer/contractual requirements. Therefore, the individual selected for the position may be required to meet certain citizenship, immigration, and/or location-related requirements, as well as screenings, background checks and additional training. The Company, in its sole discretion, will determine whether or not to seek a contractual waiver or regulatory export authorization if required. Employment is contingent upon meeting applicable qualifications, as determined by the Company, as well as adhering to all relevant federal, state, and local laws and regulations. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Woodward is committed to creating a great workplace for all team members. Our company and its members are committed to acting with integrity, being respectful and accountable to one another, and staying humble and driven, while maintaining the highest professional and ethical standards. We are steadfastly committed to attracting the best talent across our communities creating a rewarding workplace. Together we are fulfilling our purpose to design and deliver energy control solutions our partners count on to power a clean future. Woodward supports our members' wellbeing and regularly benchmarks with other companies in our industry to offer an extensive Total Reward package for this position. Salary will be determined by the applicant's education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Estimated hourly base pay: Level 2: $24.04 (minimum) - $31.25 (midpoint) - $38.46 (maximum). Plus, overtime and shift premium. Long-term incentive compensation in the form of equity All members included in annual cash bonus opportunity 401(k) match (4.5%) Annual Woodward stock contribution (5%) Tuition reimbursement and Training/Professional Development opportunities for all members 12 paid holidays, including floating holidays Industry leading medical, dental, and vision Insurance upon date of hire Vacation / Sick Time / Vacation Buy-up / Short Term Disability / Bereavement leave. Paid parental leave Adoption Assistance Employee Assistance Program, including mental health benefits Member Life & AD&D / Long Term Disability / Member Optional Life Member referral bonus Spouse / Child Optional Life / Optional AD&D / Healthcare and Dependent Care Flexible Spending Voluntary benefits, including: Home / Auto Insurance discounts Whole Life Insurance / Critical Illness Insurance / Legal Assistance / Military Leave Are you ready to make your mark? If you're a CNC Machinist (Level 2), we have an exciting opportunity for you! In this role, you will report to the Manufacturing Supervisor and take responsibility for setting up, operating, and maintaining CNC machining equipment, such as vertical and horizontal mills and lathes in an industrial setting. This position requires strong troubleshooting skills, moderate decision-making, and problem-solving abilities. ** This is a 2nd shift position, Monday to Friday (8 hours shift), starting at 2:30pm. Key Responsibilities: Machine Operation: Performs complex Set ups and operates numerous CNC or Manual (Lathes/Milling/Swiss/Grinding-OD/ID) machines, and other machinery to produce precision metal parts according to specifications. Performs supporting operations (ex. manual material removal, sub-assembly, etc.) while following established procedures Performs 1st piece inspections and is required to train in these processes. Process Adherence: Follows detailed work instructions to maintain production efficiency and accuracy. Skilled at interpreting engineering blueprints and in-depth GD&T knowledge. Quality Assurance: Uses various gages to inspect finished products to ensure compliance with quality standards. Records and maintains data per operating standards (SOP). Organization & Cleanliness: Champions 5S principles, develops and refines 5S practices, and ensures consistent adherence to standards across the team or department. Collaborates with front line leadership to integrate 5S principles into broader operational processes. Safety Mindset: Serves as a safety champion by fostering a culture of accountability within the team. Partners to align safety initiatives with organizational goals. Key Skills: Technical Operation: Skilled in Set up and operation of numerous CNC or Manual machining equipment such as Lathes, Mills, Swiss, and OD/ID Grinders. Proficient in supporting operations. Knowledge of machine insert and tooling selection. Problem Solving: Identifies gap-to-standard and resolves or escalates them per standard processes/procedures. Skilled in diagnosing and resolving common issues that arise during machining processes. Anticipates potential issues and proactively identifies solutions. Mechanical Aptitude: Solid understanding of mechanical systems and components. Ability to set up and use inspection gaging and hand/power tools. Team Communication: Communicates effectively with team members and supervisors to support workflow and escalate immediate issues. Demonstrates Woodward's Core Values. Time Management: Proactively prioritizes time to complete assigned tasks within established schedules. Drives to maintain efficiency standards. Lean Mindset: Follows lean practices such as 5S and waste reduction. Identify inefficiencies and suggest improvements. Supports and participates in lean initiatives and principles and drives a culture of continuous improvement. Production Systems: Understands and adheres standardized work and escalates when it cannot be followed. Actively participates in the daily management system. Computer Skills: Uses basic software (e.g., email, spreadsheets, data entry tools) to complete tasks. Leverages specialized software where applicable. Attention to Detail: Ensures precision in tasks to maintain high quality standards. Follows instructions precisely and checks work for accuracy. Collaboration: Works cooperatively with team members to support overall team objectives and workflow. Works well with team members and accepts feedback. Collaborates across teams, shares knowledge, and supports team goals. Builds strong cross-functional relationships and fosters a collaborative culture. Application window is anticipated to close 30 days from original posting date. This information is provided in compliance with the Colorado Equal Pay for Equal Work Act and is the company's good faith and reasonable estimate of the compensation range and benefits offered for this position. The compensation offered to the successful applicant may vary based on factors including experience, skills, education, location, and other job-related reasons. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). All applicants must be U.S. Persons within the meaning of the ITAR and EAR, or eligible to obtain all required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce. The ITAR defines a U.S. Person as a U.S. citizen or national, lawful permanent resident (i.e., 'Green Card holder'), or a protected person (e.g., asylee, or refugee). Woodward is an equal opportunity employer and does not discriminate in hiring or employment on the basis of race, color, religion, sex (including sexual orientation and gender identity), national origin, age, disability, protected veteran status, or any other category protected under federal, state, or local laws.