Plumber/Pipefitter jobs at WorleyParsons - 101 jobs

**About Us** We are a diversified designer, supplier, installer, and servicer of engineered air systems and components for the industrial, life sciences, manufacturing, and mission critical markets. Our air treatment systems help control all internal conditions, including temperature, relative humidity, cleanliness, and ventilation. **Job Summary** **SUMMARY** The Pipefitter position is a critical role for the company. This individual will follow all safety rules and regulations and work as a part of a team daily. The Pipefitter position will work under the guidance of a Field Superintendent or Project Manager depending on location of the work assignment. **ESSENTIAL DUTIES AND RESPONSIBILITIES** Include the following. Other duties will likely be assigned. + Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders. + Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, cementing, soldering, and threading joints. + Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or welding equipment. + Inspect, examine, and test installed systems and pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods. + Measure and mark pipes for cutting and threading. + Cut and bore holes in structures, such as bulkheads, decks, walls, and mains, prior to pipe installation, using hand and power tools. + Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools. + Install automatic controls used to regulate pipe systems + Turn valves to shut off water or other gases or liquids from pipe sections, using valve keys or wrenches. + Remove and replace worn components. + Prepare cost estimates for clients. + Inspect work sites for obstructions and to ensure that holes will not cause structural weakness. + Operate motorized pumps to remove water from flooded manholes, basements, or facility floors. + Dip nonferrous piping materials in a mixture of molten tin and lead to obtain a coating that prevents erosion or galvanic and electrolytic action. **QUALIFICATIONS** To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **REQUIRED EDUCATION and/or EXPERIENCE** High School Diploma or GED or equivalent combination of experience and education. + Ability to pass background check and drug screen. + Valid driver's license and insurable driving record. + OSHA 10 Certification desired + Ability to read and understand blueprints **PREFERRED EDUCATION and/or EXPERIENCE** + Knowledge of the construction industry and documentation. + Working knowledge of federal, state, and city regulations and guidelines. + Operate a forklift and/or scissor lift **COMPUTER SKILLS** Must demonstrate proficiency in Microsoft Office applications, (i.e. Outlook, Word and Excel) + Familiarity with AutoCAD, and other mechanical, technical, or construction programs. + Familiarity with project management/document control software. + Familiarity with construction/financial software packages. **REQUIRED ATTRIBUTES** The requirements listed below are representative of characteristics and demonstrated capabilities sought to perform this job successfully. + Must demonstrate integrity, honesty, professionalism and commitment to company values. + Must be self-motivated and able to work efficiently in a fast-paced environment. + Must have high standards of quality with attention to detail. + Must possess ability to manage and supervise personnel. + Must build positive working relationships with multiple internal and external customers **LANGUAGE SKILLS** Must have the demonstrated ability to effectively communicate in English. **PHYSICAL DEMANDS** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, see, talk, and hear. The employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is regularly required to walk, reach with hands and arms, climb or balance and stoop, kneel, crouch, or crawl. The employee may occasionally lift and/or move up to twenty-five (25) pounds. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is regularly required to commute to field locations. The employee must have the ability to navigate around job site locations. **WORK ENVIRONMENT** The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee should expect to sit for long periods in front of a computer and also travel to field locations as needed. While visiting field locations, the employee may be required to work outdoors, be exposed to wet and/or humid conditions; moving mechanical and electrical parts; high, precarious places; dust, fumes or airborne particles; toxic or caustic chemicals; outside weather conditions, extended exposure to sunlight; cold and heat; risk of electrical shock and vibration. The noise level in the work environment is usually moderate to loud. **Bahnson offers high-quality employee benefits that start the 1st day of the month after your start date!** + Health Insurance: 4 plans available to choose from with Rx coverage + Heath Saving Account (HSA) and Flexible Spending Accounts (FSA) options available + Dental insurance: 2 plans available to choose from + Vision insurance + Company-paid Accidental Death/Dismemberment coverage + Company-paid Life insurance + Company-paid Short-Term & Long-Term Disability coverage + 401(k) Retirement Plan with company match up to the first 6% and immediate vesting **Other Great Benefits:** + Competitive Paid Days Off + Holiday Pay + Weekly pay with direct deposit + Employee referral incentives + Employee Assistance Program (EAP) + Tuition Reimbursement **Notice to prospective employees:** There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (****************************************************************************************************** DateDesc&w=&wc=&we=&wpst=) . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. **We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled** **\#mechsys** **\#LI-Onsite** **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-NC-Charlotte_ **ID** _2025-1742_ **Company** _Bahnson Inc._ **Category** _Operations Services_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _10 hours ago_ _(1/26/2026 2:45 PM)_

Selects type and size of pipe or other related materials and equipment according to specifications. Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. Lays out, positions, aligns and fits components together in various body positions. Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. Responsibilities Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. Qualifications Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. Capable of producing welds that will meet NDE (non destructive examination) requirements

About Us As a $100M+ full-service commercial air conditioning company, Hill York provides design build solutions, new construction, system maintenance, service, repairs, energy solutions and installation for a wide range of heating, cooling and ventilation systems. Since designing and installing the first air conditioning systems in Miami Beach hotels after World War II, Hill York has played a key role in leading Florida facilities such as condos, offices and university buildings to new plateaus of indoor comfort and energy efficiency. We are a growing company with four locations in the State of Florida. Hill York seeks talented performers and offers a challenging and rewarding work environment that emphasizes teamwork, results, and most importantly honesty and integrity. We value our employees and are committed to attracting highly skilled, talented individuals to join our strong, family-oriented workforce and to help us build on our success. Job Summary Hill York seeks an experienced Pipefitter to lay out, fabricate, assemble, install, weld, and maintain piping systems and related equipment for steam, hot water, heating, cooling, lubricating, and industrial processing systems. This role requires strong technical skills, attention to detail, and a commitment to safety, quality, and efficiency in both new construction and retrofit environments. Essential Duties & Responsibilities * Layout, fit, assemble, and install a variety of piping systems according to blueprints, specifications, and job plans. * Cut, thread, and bend pipe using hand tools, power tools, and machines such as saws, pipe cutters, threading machines, and pipe benders. * Assemble and install variety of metal and nonmetal pipes, tubes, and fittings, including steel, copper, HDPE, and PVC. * Connect pipes using various methods such as welding, threading, grooved fittings, soldering, brazing, and fusion. * Secure pipes to structures using brackets, clamps, hangers, pipe stand, and anchors. * Perform welding tasks using SMA (Stick), GMAW (MIG). Or GTAW (TIG) in multiple positions (vertical, horizontal, overhead), selecting appropriate methods and tools based on project requirements. * Operate grinders and other tools to prepare materials for welding and ensure clean, accurate joints. * Inspect completed work to ensure compliance with specifications, codes, and best practices. * Follow detailed installation plans and collaborate with supervisors and team members to meet project timelines and quality standards. * Conduct pre-task planning and job hazard analysis before beginning work to identify and mitigate risks. * Wear required personal protective equipment (PPE) at all times, including hard hats, safety glasses, gloves, and steel-toed boots. * Follow all company safety policies and OSHA regulations, maintaining a clean and hazard-free work environment. * Report unsafe conditions or incidents immediately to supervisors and participate in safety meetings and training sessions. * Complete any required documentation and paperwork accurately and on time. * Communicate effectively with internal teams, external customers, and subcontractors to coordinate work, resolve issues, and ensure customer satisfaction. * Operate and maintain company vehicles in compliance with safety regulations when transporting tools, materials, or traveling to job sites. #hillyork #LI-SD2 #LI-TM1 #LI-Onsite Qualifications * Ability to read and understand blueprints, technical drawings, and construction documents. * Ability to stand and walk for extended periods of time. * Ability to bend, twist, climb ladders, and maintain balance while working at heights. * Ability to climb stairs and ladders safely and frequently. * Ability to push, pull, lift, and carry up to 50 lbs. * Comfortable working in various environments, including confined spaces, elevated areas, and outdoor conditions. * Strong attention to detail and commitment to safety protocols. * Ability to work independently and as part of a team. * Demonstrated high mechanical aptitude and problem-solving skills. * Ability to operate machinery and equipment such as forklifts, Lull, scissor lifts, and other material handling or aerial lift equipment safely and in compliance with company and OSHA standards. * Welding certificate is a plus but not required. Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

**About Us** As a $100M+ full-service commercial air conditioning company, Hill York provides design build solutions, new construction, system maintenance, service, repairs, energy solutions and installation for a wide range of heating, cooling and ventilation systems. Since designing and installing the first air conditioning systems in Miami Beach hotels after World War II, Hill York has played a key role in leading Florida facilities such as condos, offices and university buildings to new plateaus of indoor comfort and energy efficiency. We are a growing company with four locations in the State of Florida. Hill York seeks talented performers and offers a challenging and rewarding work environment that emphasizes teamwork, results, and most importantly honesty and integrity. We value our employees and are committed to attracting highly skilled, talented individuals to join our strong, family-oriented workforce and to help us build on our success. **Job Summary** Hill York seeks an experienced Pipefitter to lay out, fabricate, assemble, install, weld, and maintain piping systems and related equipment for steam, hot water, heating, cooling, lubricating, and industrial processing systems. This role requires strong technical skills, attention to detail, and a commitment to safety, quality, and efficiency in both new construction and retrofit environments. **Essential Duties & Responsibilities** + Layout, fit, assemble, and install a variety of piping systems according to blueprints, specifications, and job plans. + Cut, thread, and bend pipe using hand tools, power tools, and machines such as saws, pipe cutters, threading machines, and pipe benders. + Assemble and install variety of metal and nonmetal pipes, tubes, and fittings, including steel, copper, HDPE, and PVC. + Connect pipes using various methods such as welding, threading, grooved fittings, soldering, brazing, and fusion. + Secure pipes to structures using brackets, clamps, hangers, pipe stand, and anchors. + Perform welding tasks using SMA (Stick), GMAW (MIG). Or GTAW (TIG) in multiple positions (vertical, horizontal, overhead), selecting appropriate methods and tools based on project requirements. + Operate grinders and other tools to prepare materials for welding and ensure clean, accurate joints. + Inspect completed work to ensure compliance with specifications, codes, and best practices. + Follow detailed installation plans and collaborate with supervisors and team members to meet project timelines and quality standards. + Conduct pre-task planning and job hazard analysis before beginning work to identify and mitigate risks. + Wear required personal protective equipment (PPE) at all times, including hard hats, safety glasses, gloves, and steel-toed boots. + Follow all company safety policies and OSHA regulations, maintaining a clean and hazard-free work environment. + Report unsafe conditions or incidents immediately to supervisors and participate in safety meetings and training sessions. + Complete any required documentation and paperwork accurately and on time. + Communicate effectively with internal teams, external customers, and subcontractors to coordinate work, resolve issues, and ensure customer satisfaction. + Operate and maintain company vehicles in compliance with safety regulations when transporting tools, materials, or traveling to job sites. \#hillyork \#LI-SD2 \#LI-TM1 \#LI-Onsite **Qualifications** + Ability to read and understand blueprints, technical drawings, and construction documents. + Ability to stand and walk for extended periods of time. + Ability to bend, twist, climb ladders, and maintain balance while working at heights. + Ability to climb stairs and ladders safely and frequently. + Ability to push, pull, lift, and carry up to 50 lbs. + Comfortable working in various environments, including confined spaces, elevated areas, and outdoor conditions. + Strong attention to detail and commitment to safety protocols. + Ability to work independently and as part of a team. + Demonstrated high mechanical aptitude and problem-solving skills. + Ability to operate machinery and equipment such as forklifts, Lull, scissor lifts, and other material handling or aerial lift equipment safely and in compliance with company and OSHA standards. + Welding certificate is a plus but not required. **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-FL-Lake Park_ **ID** _2025-5548_ **Company** _Hill York Services Corporation, LLC_ **Category** _Skilled Trade_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _2 months ago_ _(11/26/2025 11:50 AM)_

About Us As a $100M+ full-service commercial air conditioning company, Hill York provides design build solutions, new construction, system maintenance, service, repairs, energy solutions and installation for a wide range of heating, cooling and ventilation systems. Since designing and installing the first air conditioning systems in Miami Beach hotels after World War II, Hill York has played a key role in leading Florida facilities such as condos, offices and university buildings to new plateaus of indoor comfort and energy efficiency. We are a growing company with four locations in the State of Florida. Hill York seeks talented performers and offers a challenging and rewarding work environment that emphasizes teamwork, results, and most importantly honesty and integrity. We value our employees and are committed to attracting highly skilled, talented individuals to join our strong, family-oriented workforce and to help us build on our success. Job Summary Hill York seeks an experienced Pipefitter to lay out, fabricate, assemble, install, weld, and maintain piping systems and related equipment for steam, hot water, heating, cooling, lubricating, and industrial processing systems. This role requires strong technical skills, attention to detail, and a commitment to safety, quality, and efficiency in both new construction and retrofit environments. Essential Duties & Responsibilities * Layout, fit, assemble, and install a variety of piping systems according to blueprints, specifications, and job plans. * Cut, thread, and bend pipe using hand tools, power tools, and machines such as saws, pipe cutters, threading machines, and pipe benders. * Assemble and install variety of metal and nonmetal pipes, tubes, and fittings, including steel, copper, HDPE, and PVC. * Connect pipes using various methods such as welding, threading, grooved fittings, soldering, brazing, and fusion. * Secure pipes to structures using brackets, clamps, hangers, pipe stand, and anchors. * Perform welding tasks using SMA (Stick), GMAW (MIG). Or GTAW (TIG) in multiple positions (vertical, horizontal, overhead), selecting appropriate methods and tools based on project requirements. * Operate grinders and other tools to prepare materials for welding and ensure clean, accurate joints. * Inspect completed work to ensure compliance with specifications, codes, and best practices. * Follow detailed installation plans and collaborate with supervisors and team members to meet project timelines and quality standards. * Conduct pre-task planning and job hazard analysis before beginning work to identify and mitigate risks. * Wear required personal protective equipment (PPE) at all times, including hard hats, safety glasses, gloves, and steel-toed boots. * Follow all company safety policies and OSHA regulations, maintaining a clean and hazard-free work environment. * Report unsafe conditions or incidents immediately to supervisors and participate in safety meetings and training sessions. * Complete any required documentation and paperwork accurately and on time. * Communicate effectively with internal teams, external customers, and subcontractors to coordinate work, resolve issues, and ensure customer satisfaction. * Operate and maintain company vehicles in compliance with safety regulations when transporting tools, materials, or traveling to job sites. #hillyork #LI-SD2 #LI-TM1 #LI-Onsite Qualifications * Ability to read and understand blueprints, technical drawings, and construction documents. * Ability to stand and walk for extended periods of time. * Ability to bend, twist, climb ladders, and maintain balance while working at heights. * Ability to climb stairs and ladders safely and frequently. * Ability to push, pull, lift, and carry up to 50 lbs. * Comfortable working in various environments, including confined spaces, elevated areas, and outdoor conditions. * Strong attention to detail and commitment to safety protocols. * Ability to work independently and as part of a team. * Demonstrated high mechanical aptitude and problem-solving skills. * Ability to operate machinery and equipment such as forklifts, Lull, scissor lifts, and other material handling or aerial lift equipment safely and in compliance with company and OSHA standards. * Welding certificate is a plus but not required. Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

**About Us** As a $100M+ full-service commercial air conditioning company, Hill York provides design build solutions, new construction, system maintenance, service, repairs, energy solutions and installation for a wide range of heating, cooling and ventilation systems. Since designing and installing the first air conditioning systems in Miami Beach hotels after World War II, Hill York has played a key role in leading Florida facilities such as condos, offices and university buildings to new plateaus of indoor comfort and energy efficiency. We are a growing company with four locations in the State of Florida. Hill York seeks talented performers and offers a challenging and rewarding work environment that emphasizes teamwork, results, and most importantly honesty and integrity. We value our employees and are committed to attracting highly skilled, talented individuals to join our strong, family-oriented workforce and to help us build on our success. **Job Summary** Hill York seeks an experienced Pipefitter to lay out, fabricate, assemble, install, weld, and maintain piping systems and related equipment for steam, hot water, heating, cooling, lubricating, and industrial processing systems. This role requires strong technical skills, attention to detail, and a commitment to safety, quality, and efficiency in both new construction and retrofit environments. **Essential Duties & Responsibilities** + Layout, fit, assemble, and install a variety of piping systems according to blueprints, specifications, and job plans. + Cut, thread, and bend pipe using hand tools, power tools, and machines such as saws, pipe cutters, threading machines, and pipe benders. + Assemble and install variety of metal and nonmetal pipes, tubes, and fittings, including steel, copper, HDPE, and PVC. + Connect pipes using various methods such as welding, threading, grooved fittings, soldering, brazing, and fusion. + Secure pipes to structures using brackets, clamps, hangers, pipe stand, and anchors. + Perform welding tasks using SMA (Stick), GMAW (MIG). Or GTAW (TIG) in multiple positions (vertical, horizontal, overhead), selecting appropriate methods and tools based on project requirements. + Operate grinders and other tools to prepare materials for welding and ensure clean, accurate joints. + Inspect completed work to ensure compliance with specifications, codes, and best practices. + Follow detailed installation plans and collaborate with supervisors and team members to meet project timelines and quality standards. + Conduct pre-task planning and job hazard analysis before beginning work to identify and mitigate risks. + Wear required personal protective equipment (PPE) at all times, including hard hats, safety glasses, gloves, and steel-toed boots. + Follow all company safety policies and OSHA regulations, maintaining a clean and hazard-free work environment. + Report unsafe conditions or incidents immediately to supervisors and participate in safety meetings and training sessions. + Complete any required documentation and paperwork accurately and on time. + Communicate effectively with internal teams, external customers, and subcontractors to coordinate work, resolve issues, and ensure customer satisfaction. + Operate and maintain company vehicles in compliance with safety regulations when transporting tools, materials, or traveling to job sites. \#hillyork \#LI-SD2 \#LI-TM1 \#LI-Onsite **Qualifications** + Ability to read and understand blueprints, technical drawings, and construction documents. + Ability to stand and walk for extended periods of time. + Ability to bend, twist, climb ladders, and maintain balance while working at heights. + Ability to climb stairs and ladders safely and frequently. + Ability to push, pull, lift, and carry up to 50 lbs. + Comfortable working in various environments, including confined spaces, elevated areas, and outdoor conditions. + Strong attention to detail and commitment to safety protocols. + Ability to work independently and as part of a team. + Demonstrated high mechanical aptitude and problem-solving skills. + Ability to operate machinery and equipment such as forklifts, Lull, scissor lifts, and other material handling or aerial lift equipment safely and in compliance with company and OSHA standards. + Welding certificate is a plus but not required. **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-FL-Fort Lauderdale_ **ID** _2025-5547_ **Company** _Hill York Services Corporation, LLC_ **Category** _Skilled Trade_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _2 months ago_ _(11/26/2025 11:47 AM)_

About Us As a $100M+ full-service commercial air conditioning company, Hill York provides design build solutions, new construction, system maintenance, service, repairs, energy solutions and installation for a wide range of heating, cooling and ventilation systems. Since designing and installing the first air conditioning systems in Miami Beach hotels after World War II, Hill York has played a key role in leading Florida facilities such as condos, offices and university buildings to new plateaus of indoor comfort and energy efficiency. We are a growing company with four locations in the State of Florida. Hill York seeks talented performers and offers a challenging and rewarding work environment that emphasizes teamwork, results, and most importantly honesty and integrity. We value our employees and are committed to attracting highly skilled, talented individuals to join our strong, family-oriented workforce and to help us build on our success. Job Summary Hill York seeks an experienced Pipefitter to lay out, fabricate, assemble, install, weld, and maintain piping systems and related equipment for steam, hot water, heating, cooling, lubricating, and industrial processing systems. This role requires strong technical skills, attention to detail, and a commitment to safety, quality, and efficiency in both new construction and retrofit environments. Essential Duties & Responsibilities * Layout, fit, assemble, and install a variety of piping systems according to blueprints, specifications, and job plans. * Cut, thread, and bend pipe using hand tools, power tools, and machines such as saws, pipe cutters, threading machines, and pipe benders. * Assemble and install variety of metal and nonmetal pipes, tubes, and fittings, including steel, copper, HDPE, and PVC. * Connect pipes using various methods such as welding, threading, grooved fittings, soldering, brazing, and fusion. * Secure pipes to structures using brackets, clamps, hangers, pipe stand, and anchors. * Perform welding tasks using SMA (Stick), GMAW (MIG). Or GTAW (TIG) in multiple positions (vertical, horizontal, overhead), selecting appropriate methods and tools based on project requirements. * Operate grinders and other tools to prepare materials for welding and ensure clean, accurate joints. * Inspect completed work to ensure compliance with specifications, codes, and best practices. * Follow detailed installation plans and collaborate with supervisors and team members to meet project timelines and quality standards. * Conduct pre-task planning and job hazard analysis before beginning work to identify and mitigate risks. * Wear required personal protective equipment (PPE) at all times, including hard hats, safety glasses, gloves, and steel-toed boots. * Follow all company safety policies and OSHA regulations, maintaining a clean and hazard-free work environment. * Report unsafe conditions or incidents immediately to supervisors and participate in safety meetings and training sessions. * Complete any required documentation and paperwork accurately and on time. * Communicate effectively with internal teams, external customers, and subcontractors to coordinate work, resolve issues, and ensure customer satisfaction. * Operate and maintain company vehicles in compliance with safety regulations when transporting tools, materials, or traveling to job sites. #hillyork #LI-SD2 #LI-TM1 #LI-Onsite Qualifications * Ability to read and understand blueprints, technical drawings, and construction documents. * Ability to stand and walk for extended periods of time. * Ability to bend, twist, climb ladders, and maintain balance while working at heights. * Ability to climb stairs and ladders safely and frequently. * Ability to push, pull, lift, and carry up to 50 lbs. * Comfortable working in various environments, including confined spaces, elevated areas, and outdoor conditions. * Strong attention to detail and commitment to safety protocols. * Ability to work independently and as part of a team. * Demonstrated high mechanical aptitude and problem-solving skills. * Ability to operate machinery and equipment such as forklifts, Lull, scissor lifts, and other material handling or aerial lift equipment safely and in compliance with company and OSHA standards. * Welding certificate is a plus but not required. Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

**About Us** As a $100M+ full-service commercial air conditioning company, Hill York provides design build solutions, new construction, system maintenance, service, repairs, energy solutions and installation for a wide range of heating, cooling and ventilation systems. Since designing and installing the first air conditioning systems in Miami Beach hotels after World War II, Hill York has played a key role in leading Florida facilities such as condos, offices and university buildings to new plateaus of indoor comfort and energy efficiency. We are a growing company with four locations in the State of Florida. Hill York seeks talented performers and offers a challenging and rewarding work environment that emphasizes teamwork, results, and most importantly honesty and integrity. We value our employees and are committed to attracting highly skilled, talented individuals to join our strong, family-oriented workforce and to help us build on our success. **Job Summary** Hill York seeks an experienced Pipefitter to lay out, fabricate, assemble, install, weld, and maintain piping systems and related equipment for steam, hot water, heating, cooling, lubricating, and industrial processing systems. This role requires strong technical skills, attention to detail, and a commitment to safety, quality, and efficiency in both new construction and retrofit environments. **Essential Duties & Responsibilities** + Layout, fit, assemble, and install a variety of piping systems according to blueprints, specifications, and job plans. + Cut, thread, and bend pipe using hand tools, power tools, and machines such as saws, pipe cutters, threading machines, and pipe benders. + Assemble and install variety of metal and nonmetal pipes, tubes, and fittings, including steel, copper, HDPE, and PVC. + Connect pipes using various methods such as welding, threading, grooved fittings, soldering, brazing, and fusion. + Secure pipes to structures using brackets, clamps, hangers, pipe stand, and anchors. + Perform welding tasks using SMA (Stick), GMAW (MIG). Or GTAW (TIG) in multiple positions (vertical, horizontal, overhead), selecting appropriate methods and tools based on project requirements. + Operate grinders and other tools to prepare materials for welding and ensure clean, accurate joints. + Inspect completed work to ensure compliance with specifications, codes, and best practices. + Follow detailed installation plans and collaborate with supervisors and team members to meet project timelines and quality standards. + Conduct pre-task planning and job hazard analysis before beginning work to identify and mitigate risks. + Wear required personal protective equipment (PPE) at all times, including hard hats, safety glasses, gloves, and steel-toed boots. + Follow all company safety policies and OSHA regulations, maintaining a clean and hazard-free work environment. + Report unsafe conditions or incidents immediately to supervisors and participate in safety meetings and training sessions. + Complete any required documentation and paperwork accurately and on time. + Communicate effectively with internal teams, external customers, and subcontractors to coordinate work, resolve issues, and ensure customer satisfaction. + Operate and maintain company vehicles in compliance with safety regulations when transporting tools, materials, or traveling to job sites. \#hillyork \#LI-SD2 \#LI-TM1 \#LI-Onsite **Qualifications** + Ability to read and understand blueprints, technical drawings, and construction documents. + Ability to stand and walk for extended periods of time. + Ability to bend, twist, climb ladders, and maintain balance while working at heights. + Ability to climb stairs and ladders safely and frequently. + Ability to push, pull, lift, and carry up to 50 lbs. + Comfortable working in various environments, including confined spaces, elevated areas, and outdoor conditions. + Strong attention to detail and commitment to safety protocols. + Ability to work independently and as part of a team. + Demonstrated high mechanical aptitude and problem-solving skills. + Ability to operate machinery and equipment such as forklifts, Lull, scissor lifts, and other material handling or aerial lift equipment safely and in compliance with company and OSHA standards. + Welding certificate is a plus but not required. **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-FL-Tampa_ **ID** _2025-5550_ **Company** _Hill York Services Corporation, LLC_ **Category** _Skilled Trade_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _2 months ago_ _(11/26/2025 11:55 AM)_

About Us We are a leading industrial mechanical, electrical, and civil construction services provider for the fossil and nuclear power, pulp and paper, chemical, mining, and general manufacturing industries. We provide a full range of industrial facilities maintenance and process maintenance services. Job Summary MOR PPM Inc. seeks qualified pipe fitters for a project in Skippers, VA. Essential Duties & Responsibilities Exp w/layout, fabrication, installation, maintenance & repair of piping systems, structural steel, vessels, pumps & equip. in industry environment. * Layout, fit, and fabricate metal components to assemble structural forms in a steam boiler environment. * Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. * Must be experienced in Stainless Steel and Carbon Steel. * Must be experienced in taking your own measurements and use power tools. Qualifications * At least three years Pipefitter in Industrial Construction setting * Committed to safety at all times * Excellent attendance Physical Demands * Must be able to complete hiring paperwork electronically through DocuSign * May be required to lift and carry items weighing up to 50 pounds * Must posses enough strength and stamina to perform the technical duties and essential functions as identified above * Must be able to move in and around confined spaces and uneven areas * Must have full range of motion consistent with age * Must be able to climb and maintain balance ladders * Must be able to adequately hear and respond to voice commands and alerts from other employees, alarms and other job-related noises * Visual acuity, depth perception and color discrimination consistent with that required to work at heights and on uneven surfaces * Safety/Steel toe shoes are required. #PPM Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

About Us Our capabilities cover a full suite of millwrighting services, including installing, setting, aligning, and leveling machinery and equipment, as well as dismantling, refurbishing, reassembling, and moving. Additionally, our expertise covers close tolerance and precision alignment, as well as fabrication, concrete construction, and industrial HVAC solutions. Job Summary Job Title: Multi-Craft Pipefitter Department: Operations Reports To: Multi-Craft Pipefitter Foreman FLSA Status: Non-exempt Summary: At Cherokee Millwright, we are a multi-craft company that focuses on the needs of our customers by providing multi-trades personnel to meet the customer's unique job requests. Therefore, all field employees will be cross-trained in various trades such as millwrighting, pipefitting, welding, sheet metal, civil, etc. The focus of this position will be in lay out, assemble, install and maintain pipe systems, pipe supports and related equipment for steam, hot water, heating, cooling, lubricating, compressed air and industrial production and processing systems. However, it will not be entirely set to this specific skillset. Essential Duties and Responsibilities: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Cut, thread and hammer pipe to specifications, using tools such as saws, cutting torches, pipe threaders and benders. Assemble and secure pipes, tubes, fittings and related equipment, according to specifications, by welding, brazing, cementing, soldering and threading joints. Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clams, tools or welding equipment. Inspect, examine, and test installed systems and pipelines, using pressure gauge, hydrostatic testing, observation, or other methods. Measure and mark pipes for cutting and threading. Plan pipe system layout, installation, or repair according to specifications. Additional skills in other crafts will be necessary to meet our customers need and will be expected in this role. Supervisory Responsibilities: None Education and/or Experience: High school diploma or general education degree (GED); or two years related experience and/or training; or equivalent combination of education and experience. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently exposed to moving mechanical parts and outside weather conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Other Duties:Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This would include duties and responsibilities while assigned to work on, but not limited to the following: millwright, pipefitting, welding, sheet metal, mechanical, and rigging projects. Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies Field Safety Supervisor. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled. #cherokee #LI-JK1 #LI-ONSITE Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

About Us We are a leading industrial mechanical, electrical, and civil construction services provider for the fossil and nuclear power, pulp and paper, chemical, mining, and general manufacturing industries. We provide a full range of industrial facilities maintenance and process maintenance services. Job Summary About Us: Backed by more than 40 years of experience and one of the industry's leading safety performance records, PPM, helps clients address the complex challenges inherent in today's manufacturing and industrial facilities environment. Our wide experience in meeting industrial plant maintenance needs enables us to implement systems and processes that keep your facilities and equipment running at consistently optimum levels. Job Title: -- Pipe Fitter - Hopewell, VA Job Summary: Exp w/layout, fabrication, installation, maintenance & repair of piping systems, structural steel, vessels, pumps & equip. in industry environment. Essential Duties and Responsibilities: -- * Layout, fit, and fabricate metal components to assemble structural forms in a steam boiler environment. * Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. * Must be experienced in Stainless Steel and Carbon Steel. * Must be experienced in taking your own measurements and use power tools. Qualifications: * At least three years Pipefitter in Industrial Construction setting * Committed to safety at all times * Excellent attendance * Must be able to successfully pass a drug screen Physical Requirements/Job Site Requirements: * Must be able to complete hiring paperwork electronically through DocuSign * May be required to lift and carry items weighing up to 50 pounds * Must posses enough strength and stamina to perform the technical duties and essential functions as identified above * Must be able to move in and around confined spaces and uneven areas * Must have full range of motion consistent with age * Must be able to climb and maintain balance ladders * Must be able to adequately hear and respond to voice commands and alerts from other employees, alarms and other job-related noises * Visual acuity, depth perception and color discrimination consistent with that required to work at heights and on uneven surfaces * Safety/Steel toe shoes are required. #PPM Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and is companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

**About Us** We are a leading industrial mechanical, electrical, and civil construction services provider for the fossil and nuclear power, pulp and paper, chemical, mining, and general manufacturing industries. We provide a full range of industrial facilities maintenance and process maintenance services. **Job Summary** **About Us:** Backed by more than 40 years of experience and one of the industry's leading safety performance records, PPM, helps clients address the complex challenges inherent in today's manufacturing and industrial facilities environment. Our wide experience in meeting industrial plant maintenance needs enables us to implement systems and processes that keep your facilities and equipment running at consistently optimum levels. **Job Title:** -- Pipe Fitter - Hopewell, VA **Job Summary:** Exp w/layout, fabrication, installation, maintenance & repair of piping systems, structural steel, vessels, pumps & equip. in industry environment. **Essential Duties and Responsibilities:** -- + Layout, fit, and fabricate metal components to assemble structural forms in a steam boiler environment. + Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. + Must be experienced in Stainless Steel and Carbon Steel. + Must be experienced in taking your own measurements and use power tools. **Qualifications:** + At least three years Pipefitter in Industrial Construction setting + Committed to safety at all times + Excellent attendance + Must be able to successfully pass a drug screen **Physical Requirements/Job Site Requirements:** + Must be able to complete hiring paperwork electronically through DocuSign + May be required to lift and carry items weighing up to 50 pounds + Must posses enough strength and stamina to perform the technical duties and essential functions as identified above + Must be able to move in and around confined spaces and uneven areas + Must have full range of motion consistent with age + Must be able to climb and maintain balance ladders + Must be able to adequately hear and respond to voice commands and alerts from other employees, alarms and other job-related noises + Visual acuity, depth perception and color discrimination consistent with that required to work at heights and on uneven surfaces + Safety/Steel toe shoes are required. \#PPM **_Notice to prospective employees:_** There have been fraudulent postings and emails regarding job openings. EMCOR Group and is companies **list open positions here (****************************************************************************************************** DateDesc&w=&wc=&we=&wpst=)** **.** Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. **As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we** **offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled** **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Affirmative Action Policy** Please review our Affirmative Action Policy (*************************************************************************************************************** . **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-VA-Hopewell_ **ID** _2025-5645_ **Company** _MOR PPM, Inc._ **Category** _Operations Services_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _3 weeks ago_ _(1/8/2026 10:55 AM)_

About Us As a $100M+ full-service commercial air conditioning company, Hill York provides design build solutions, new construction, system maintenance, service, repairs, energy solutions and installation for a wide range of heating, cooling and ventilation systems. Since designing and installing the first air conditioning systems in Miami Beach hotels after World War II, Hill York has played a key role in leading Florida facilities such as condos, offices and university buildings to new plateaus of indoor comfort and energy efficiency. We are a growing company with four locations in the State of Florida. Hill York seeks talented performers and offers a challenging and rewarding work environment that emphasizes teamwork, results, and most importantly honesty and integrity. We value our employees and are committed to attracting highly skilled, talented individuals to join our strong, family-oriented workforce and to help us build on our success. Job Summary Hill York seeks an experienced Pipefitter to lay out, fabricate, assemble, install, weld, and maintain piping systems and related equipment for steam, hot water, heating, cooling, lubricating, and industrial processing systems. This role requires strong technical skills, attention to detail, and a commitment to safety, quality, and efficiency in both new construction and retrofit environments. Essential Duties & Responsibilities * Layout, fit, assemble, and install a variety of piping systems according to blueprints, specifications, and job plans. * Cut, thread, and bend pipe using hand tools, power tools, and machines such as saws, pipe cutters, threading machines, and pipe benders. * Assemble and install variety of metal and nonmetal pipes, tubes, and fittings, including steel, copper, HDPE, and PVC. * Connect pipes using various methods such as welding, threading, grooved fittings, soldering, brazing, and fusion. * Secure pipes to structures using brackets, clamps, hangers, pipe stand, and anchors. * Perform welding tasks using SMA (Stick), GMAW (MIG). Or GTAW (TIG) in multiple positions (vertical, horizontal, overhead), selecting appropriate methods and tools based on project requirements. * Operate grinders and other tools to prepare materials for welding and ensure clean, accurate joints. * Inspect completed work to ensure compliance with specifications, codes, and best practices. * Follow detailed installation plans and collaborate with supervisors and team members to meet project timelines and quality standards. * Conduct pre-task planning and job hazard analysis before beginning work to identify and mitigate risks. * Wear required personal protective equipment (PPE) at all times, including hard hats, safety glasses, gloves, and steel-toed boots. * Follow all company safety policies and OSHA regulations, maintaining a clean and hazard-free work environment. * Report unsafe conditions or incidents immediately to supervisors and participate in safety meetings and training sessions. * Complete any required documentation and paperwork accurately and on time. * Communicate effectively with internal teams, external customers, and subcontractors to coordinate work, resolve issues, and ensure customer satisfaction. * Operate and maintain company vehicles in compliance with safety regulations when transporting tools, materials, or traveling to job sites. #hillyork #LI-SD2 #LI-TM1 #LI-Onsite Qualifications * Ability to read and understand blueprints, technical drawings, and construction documents. * Ability to stand and walk for extended periods of time. * Ability to bend, twist, climb ladders, and maintain balance while working at heights. * Ability to climb stairs and ladders safely and frequently. * Ability to push, pull, lift, and carry up to 50 lbs. * Comfortable working in various environments, including confined spaces, elevated areas, and outdoor conditions. * Strong attention to detail and commitment to safety protocols. * Ability to work independently and as part of a team. * Demonstrated high mechanical aptitude and problem-solving skills. * Ability to operate machinery and equipment such as forklifts, Lull, scissor lifts, and other material handling or aerial lift equipment safely and in compliance with company and OSHA standards. * Welding certificate is a plus but not required. Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

**About Us** As a $100M+ full-service commercial air conditioning company, Hill York provides design build solutions, new construction, system maintenance, service, repairs, energy solutions and installation for a wide range of heating, cooling and ventilation systems. Since designing and installing the first air conditioning systems in Miami Beach hotels after World War II, Hill York has played a key role in leading Florida facilities such as condos, offices and university buildings to new plateaus of indoor comfort and energy efficiency. We are a growing company with four locations in the State of Florida. Hill York seeks talented performers and offers a challenging and rewarding work environment that emphasizes teamwork, results, and most importantly honesty and integrity. We value our employees and are committed to attracting highly skilled, talented individuals to join our strong, family-oriented workforce and to help us build on our success. **Job Summary** Hill York seeks an experienced Pipefitter to lay out, fabricate, assemble, install, weld, and maintain piping systems and related equipment for steam, hot water, heating, cooling, lubricating, and industrial processing systems. This role requires strong technical skills, attention to detail, and a commitment to safety, quality, and efficiency in both new construction and retrofit environments. **Essential Duties & Responsibilities** + Layout, fit, assemble, and install a variety of piping systems according to blueprints, specifications, and job plans. + Cut, thread, and bend pipe using hand tools, power tools, and machines such as saws, pipe cutters, threading machines, and pipe benders. + Assemble and install variety of metal and nonmetal pipes, tubes, and fittings, including steel, copper, HDPE, and PVC. + Connect pipes using various methods such as welding, threading, grooved fittings, soldering, brazing, and fusion. + Secure pipes to structures using brackets, clamps, hangers, pipe stand, and anchors. + Perform welding tasks using SMA (Stick), GMAW (MIG). Or GTAW (TIG) in multiple positions (vertical, horizontal, overhead), selecting appropriate methods and tools based on project requirements. + Operate grinders and other tools to prepare materials for welding and ensure clean, accurate joints. + Inspect completed work to ensure compliance with specifications, codes, and best practices. + Follow detailed installation plans and collaborate with supervisors and team members to meet project timelines and quality standards. + Conduct pre-task planning and job hazard analysis before beginning work to identify and mitigate risks. + Wear required personal protective equipment (PPE) at all times, including hard hats, safety glasses, gloves, and steel-toed boots. + Follow all company safety policies and OSHA regulations, maintaining a clean and hazard-free work environment. + Report unsafe conditions or incidents immediately to supervisors and participate in safety meetings and training sessions. + Complete any required documentation and paperwork accurately and on time. + Communicate effectively with internal teams, external customers, and subcontractors to coordinate work, resolve issues, and ensure customer satisfaction. + Operate and maintain company vehicles in compliance with safety regulations when transporting tools, materials, or traveling to job sites. \#hillyork \#LI-SD2 \#LI-TM1 \#LI-Onsite **Qualifications** + Ability to read and understand blueprints, technical drawings, and construction documents. + Ability to stand and walk for extended periods of time. + Ability to bend, twist, climb ladders, and maintain balance while working at heights. + Ability to climb stairs and ladders safely and frequently. + Ability to push, pull, lift, and carry up to 50 lbs. + Comfortable working in various environments, including confined spaces, elevated areas, and outdoor conditions. + Strong attention to detail and commitment to safety protocols. + Ability to work independently and as part of a team. + Demonstrated high mechanical aptitude and problem-solving skills. + Ability to operate machinery and equipment such as forklifts, Lull, scissor lifts, and other material handling or aerial lift equipment safely and in compliance with company and OSHA standards. + Welding certificate is a plus but not required. **Equal Opportunity Employer** As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled **Notice to Prospective Employees** Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here (************************************** . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend **Job Locations** _US-FL-Melbourne_ **ID** _2025-5549_ **Company** _Hill York Services Corporation, LLC_ **Category** _Skilled Trade_ **Position Type** _Full-Time_ **Location Type** _Onsite_ **Posted Date** _2 months ago_ _(11/26/2025 11:54 AM)_

About Us Our capabilities cover a full suite of millwrighting services, including installing, setting, aligning, and leveling machinery and equipment, as well as dismantling, refurbishing, reassembling, and moving. Additionally, our expertise covers close tolerance and precision alignment, as well as fabrication, concrete construction, and industrial HVAC solutions. Job Summary Job Title: Multi-Craft Pipefitter Department: Operations Reports To: Multi-Craft Pipefitter Foreman FLSA Status: Non-exempt Summary: At Cherokee Millwright, we are a multi-craft company that focuses on the needs of our customers by providing multi-trades personnel to meet the customer's unique job requests. Therefore, all field employees will be cross-trained in various trades such as millwrighting, pipefitting, welding, sheet metal, civil, etc. The focus of this position will be in lay out, assemble, install and maintain pipe systems, pipe supports and related equipment for steam, hot water, heating, cooling, lubricating, compressed air and industrial production and processing systems. However, it will not be entirely set to this specific skillset. Essential Duties and Responsibilities: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Cut, thread and hammer pipe to specifications, using tools such as saws, cutting torches, pipe threaders and benders. Assemble and secure pipes, tubes, fittings and related equipment, according to specifications, by welding, brazing, cementing, soldering and threading joints. Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clams, tools or welding equipment. Inspect, examine, and test installed systems and pipelines, using pressure gauge, hydrostatic testing, observation, or other methods. Measure and mark pipes for cutting and threading. Plan pipe system layout, installation, or repair according to specifications. Additional skills in other crafts will be necessary to meet our customers need and will be expected in this role. Supervisory Responsibilities: None Education and/or Experience: High school diploma or general education degree (GED); or two years related experience and/or training; or equivalent combination of education and experience. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand. The employee is frequently required to walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently exposed to moving mechanical parts and outside weather conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Other Duties:Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This would include duties and responsibilities while assigned to work on, but not limited to the following: millwright, pipefitting, welding, sheet metal, mechanical, and rigging projects. Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies Field Safety Supervisor. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled. #cherokee #LI-JK1 #LI-ONSITE Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

KEY JOB RESPONSIBILITIES: Selects type and size of pipe, and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to specifications. Cuts pipe, using saws, pipe cutter, hammer, and chisel, cutting torch, and pipe cutting machine. Threads pipe, using pipe threading machine. Bends pipe using pipe bending rolls and pipe bending machine. Assembles and installs a variety of metal and nonmetal pipes, tubes, and fittings, including iron, steel, copper, and plastic. JOB SKILLS: Ability to read blueprints and pipe and instrumentation drawings Ability to read measuring devices Knowledge of pipe schedules and base material Ability to set up and use a mig welding machine EDUCATION & TRAINING: High School Diploma MINIMUM REQUIREMENTS: Five years of related experience in a manufacturing environment Must have a good command of the English language, both written and verbal PHYSICAL REQUIREMENTS/WORK ENVIRONMENT: Work performed in a shop environment Exposed to any number of elements but with none present to the extent of being disagreeable Requires normal vision and absence of color blindness Physical effort equal to frequent moving of up to 50lbs materials Regularly required to sit or stand, bend and reach The use of Safety Glasses is required The use of earplugs is recommended Ability to stand up to 10 hours a day (with a lunch in between) and up to 6 days a week Ability to work in a non-air-conditioned environment. Steel-toe boots required in Manufacturing Facility

Joining Suncor means you will work for one of the best companies in Canada, providing tremendous future potential where talented people thrive and lead. As our business evolves, so do our employment opportunities. Our work culture includes a dynamic mix of professionals, with a diversity of skills and expertise. Are you a certified Pipefitter and Welder? Are you passionate about safety and do you want to join our dynamic maintenance team at our Commerce City refinery? Then look no further! The largest refinery in the Rocky Mountain region and the only petroleum refinery in Colorado has an opportunity for you. You will be able to use your expertise for the maintenance and repair of our assets by performing predictive and preventative maintenance activities safely, efficiently, and to a high quality to ensure optimum reliability and availability. Minimum Requirements: * Minimum of 3 years of related fitting and welding experience with piping, tubing, shell and tube heat exchangers, pressure vessels, and boilers * A High School Diploma or General Education Diploma (GED) and a valid driver's license with a driving record acceptable to Suncor * Ability to pass a 6G GTAW Uphill (2" super coupon) test proctored by Suncor inspection, and maintain active status * AND ability to pass a 6G SMAW Uphill (2" super coupon) test proctored by Suncor inspection within the first 6 months (if unable to achieve SMAW certification within 6 months, this may result in dismissal) * Exceptional communication and collaboration skills that enable you to build strong, positive relationships with diverse groups Responsibilities: * Read and interpret drawings and ISOs to perform fabrication and field installations * Fabricate and install threaded pipe, socket welded pipe and butt weld piping configurations * Install valves, steam tracing (tubing), test piping systems, hangers, supports, maintenance repairs * Operate all tools and equipment associated with this job such as carry decks, fork lifts, man lifts (articulating and scissor), basic rigging, and operation of pneumatic tools, electric tools, oxy-acetylene cutting and plasma cutting * Maintain a welding certification with x-ray quality Location and other Key Details: * You will work out of our Commerce City refinery, located at 5801 Brighton Blvd. * Hours of work are a regular 40-hour work week, 5x8 hour shifts Monday through Friday OR 4x10 hour shifts Monday through Thursday, depending on business needs * Paid overtime, often 100-600+ hours per year based on plant needs * You will be required to perform some heavy lifting, use ladders and work on elevated work sites such as scaffolds and towers with the ability to perform in a variety of different environments both indoor and outdoor as well as within confined spaces * This position is safety sensitive * In alignment with Suncor's value of Safety Above All Else, we conduct pre-employment drug testing, employment verification, education verification, background checks, and other pre-employment assessments as a condition of employment Hourly Rate and Compensation Details: * This is a union represented position under USW 12-477 * $53.04 per hour with annual increases * Competitive and flexible employee benefits package that can be adjusted to suit the changing needs of your life, including: 3 medical options (including HSA and FSA options), 2 dental options, vision coverage, and an Employee Assistance Plan * Excellent 401(k) plan with up to a 6% vested match * Suncor-funded Cash Balance defined benefit pension plan (vests in 3 years) * Relocation support will be provided Why Suncor? Suncor's operations include oil sands development, production and upgrading; offshore oil and gas; petroleum refining in Canada and the U.S.; and the company's Petro-Canada retail and wholesale distribution networks (including Canada's Electric Highway, a coast-to-coast network of fast-charging electric vehicle stations). With a strong strategy for growth and our long-standing approach to sustainability, operational excellence, capital discipline and technology and innovation, Suncor offers a solid foundation for you to continue building your career. We offer rewarding opportunities for you to learn, contribute and grow in a variety of career-building positions - all of which means tremendous potential for your future. We are focused on deepening our commitment to inclusion and diversity and creating a respectful workplace. We are an equal opportunity employer and encourage applications from all qualified individuals. We are committed to providing a diverse and inclusive work environment where every employee feels valued and respected. We have numerous employee inclusion networks to help foster an inclusive and respectful culture and drive positive change within Suncor. Current networks include both workplace inclusion networks (focusing on inclusion and respect for all), and identity-focused networks (focusing on building community and a sense of belonging and allyship). Through the Journey of Reconciliation, we are progressing the way we think and act to build greater mutual trust and respect with the Indigenous Peoples in Canada. Please note we will consider accessibility accommodations to applicants upon request.

Joining Suncor means you will work for one of the best companies in Canada, providing tremendous future potential where talented people thrive and lead. As our business evolves, so do our employment opportunities. Our work culture includes a dynamic mix of professionals, with a diversity of skills and expertise. Are you a certified Pipefitter and Welder? Are you passionate about safety and do you want to join our dynamic maintenance team at our Commerce City refinery? Then look no further! The largest refinery in the Rocky Mountain region and the only petroleum refinery in Colorado has an opportunity for you. You will be able to use your expertise for the maintenance and repair of our assets by performing predictive and preventative maintenance activities safely, efficiently, and to a high quality to ensure optimum reliability and availability. Minimum Requirements: Minimum of 3 years of related fitting and welding experience with piping, tubing, shell and tube heat exchangers, pressure vessels, and boilers A High School Diploma or General Education Diploma (GED) and a valid driver's license with a driving record acceptable to Suncor Ability to pass a 6G GTAW Uphill (2” super coupon) test proctored by Suncor inspection, and maintain active status AND ability to pass a 6G SMAW Uphill (2” super coupon) test proctored by Suncor inspection within the first 6 months (if unable to achieve SMAW certification within 6 months, this may result in dismissal) Exceptional communication and collaboration skills that enable you to build strong, positive relationships with diverse groups Responsibilities: Read and interpret drawings and ISOs to perform fabrication and field installations Fabricate and install threaded pipe, socket welded pipe and butt weld piping configurations Install valves, steam tracing (tubing), test piping systems, hangers, supports, maintenance repairs Operate all tools and equipment associated with this job such as carry decks, fork lifts, man lifts (articulating and scissor), basic rigging, and operation of pneumatic tools, electric tools, oxy-acetylene cutting and plasma cutting Maintain a welding certification with x-ray quality Location and other Key Details: You will work out of our Commerce City refinery, located at 5801 Brighton Blvd. Hours of work are a regular 40-hour work week, 5x8 hour shifts Monday through Friday OR 4x10 hour shifts Monday through Thursday, depending on business needs Paid overtime, often 100-600+ hours per year based on plant needs You will be required to perform some heavy lifting, use ladders and work on elevated work sites such as scaffolds and towers with the ability to perform in a variety of different environments both indoor and outdoor as well as within confined spaces This position is safety sensitive In alignment with Suncor's value of Safety Above All Else, we conduct pre-employment drug testing, employment verification, education verification, background checks, and other pre-employment assessments as a condition of employment Hourly Rate and Compensation Details: This is a union represented position under USW 12-477 $53.04 per hour with annual increases Competitive and flexible employee benefits package that can be adjusted to suit the changing needs of your life, including: 3 medical options (including HSA and FSA options), 2 dental options, vision coverage, and an Employee Assistance Plan Excellent 401(k) plan with up to a 6% vested match Suncor-funded Cash Balance defined benefit pension plan (vests in 3 years) Relocation support will be provided Why Suncor? Suncor's operations include oil sands development, production and upgrading; offshore oil and gas; petroleum refining in Canada and the U.S.; and the company's Petro-Canada retail and wholesale distribution networks (including Canada's Electric Highway™, a coast-to-coast network of fast-charging electric vehicle stations). With a strong strategy for growth and our long-standing approach to sustainability, operational excellence, capital discipline and technology and innovation, Suncor offers a solid foundation for you to continue building your career. We offer rewarding opportunities for you to learn, contribute and grow in a variety of career-building positions - all of which means tremendous potential for your future. We are focused on deepening our commitment to inclusion and diversity and creating a respectful workplace. We are an equal opportunity employer and encourage applications from all qualified individuals. We are committed to providing a diverse and inclusive work environment where every employee feels valued and respected. We have numerous employee inclusion networks to help foster an inclusive and respectful culture and drive positive change within Suncor. Current networks include both workplace inclusion networks (focusing on inclusion and respect for all), and identity-focused networks (focusing on building community and a sense of belonging and allyship). Through the Journey of Reconciliation, we are progressing the way we think and act to build greater mutual trust and respect with the Indigenous Peoples in Canada. Please note we will consider accessibility accommodations to applicants upon request.

Peak Utility Infrastructure is an integrated engineering and construction company that serves the Electric, Natural Gas, and Telecommunications industries. We provide a full suite of engineering, construction, operations, and maintenance services, including repair, replacement, maintenance, and installation of natural gas, telecommunications, and electric infrastructure through our operating subsidiaries: SiteWise, Kelly Cable, Riley Brothers, and Superior Pipeline Services. Position Title: Service Plumber - Gas Meter Technician Pay range is: starting at $26 per hour Our Core Values: Guided by Safety. Focused on Communities. Powered by Care. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. A Service Plumber Gas Meter Technician works under the direction of Gas Meter Foremen and the Gas Meter Supervisor and performs physical activities in support of completing meter exchanges, meter support for construction crews, meter move outs and associated piping, leak detection, relight of gas appliances, meter testing, service turn ons, and other related gas meter work. This position will identity and resolve problems and make timely decisions on a daily basis, constantly striving to obtain maximum productivity. This role will mentor and coach Gas Meter Technician I. Roles and Responsibilities: Meets client and operating company standards related to gas meter work in accordance with our core values. Installs gas meters, regulators, piping and pipe fitting work with black iron pipe. Performs change-out of existing gas utility meters and installs upgraded gas utility meters. Performs gas leak repair including above ground meter sets. Keeps legible hand-written accurate records including daily work logs and installation records. Cleans and prepares meter worksites to eliminate possible hazards. Monitors and maintains tools and equipment for proper use, storage, and upkeep. Completes all work in an organized, timely manner, within standard operating procedure. Uses relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards and communicates abnormal working conditions to appropriate parties. Measures, cuts, and threads pipes to specifications, using tools such as saws, pipe threaders, or pipe benders Inspects, examines, or tests installed systems or pipe lines, using pressure gauge, observation, or other methods Plans pipe system layout, installation, or repair, according to specifications Attaches pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment Cuts or bores holes in structures, such as bulkheads, decks or walls prior to pipe installation, using hand or power tools Shuts off gases from pipe sections, using valve keys or wrenches Assists crew leaders in construction/ reconstruction and maintenance work providing meter support. Works safely around customer houses and private property, backhoes, excavators, and directional drills. Performs other duties as assigned. Success Factors: Must be able to read and interpret documents such as safety data sheets, operating manuals, and work orders. Ability to communicate effectively both verbal and written. Good analytical skills and attention to detail. Provide exceptional customer service while on the jobsite. Basic math skills required when measuring and performing take offs for miscellaneous jobs. Detailed procedures. Responds to situations requiring immediate attention. Knowledge of standardized work routines and the ability to follow and give oral/written instructions involving a number of steps. Knowledgeable with Microsoft software applications. Moderate to strenuous effort required. This position requires extended intervals of standing, walking, climbing, bending, crouching, working at heights from ladders, scaffolds, platforms and repetitive motions of the hand/wrist and elbow/shoulder. The employee must regularly lift and/or move up to 100 pounds. The employee is occasionally required to climb and balance and talk and hear. Workers must also have the ability to work in confined, noisy, hot, and cold spaces and work with hand tools and shop equipment. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Experience and Education: A high school diploma or G.E.D. 2+ years of Residential Plumbing, pipe fitting & repair experience (diagnosing & troubleshooting a normal plumbing system). 2-3 years of service plumbing experience required. An equivalent combination of education and experience may be substituted on a year to year basis Previous experience working with underground utilities is preferred. Additional Requirements/Licenses/Certifications: Possession of, or ability to obtain, a valid State of Residence Driver's License is required. Candidates must pass criminal and Motor Vehicle Record (MVR) background checks and pass a pre-employment drug screen. Notes: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.