Zachry Construction jobs in Corpus Christi, TX

* THIS IS MAINTENANCE*NO PER DIEM* Light Equipment Operators will operate one or more construction equipment such as but not limited to bob cats, bulldozers, excavators, front-end loaders, back hoes, rollers, and graders to move earth. They will also be responsible for safety, equipment inspections, and possibly assisting with repairs. The position will be expected to assist other crafts in their down times which may include non-operating activities. JOB REQUIREMENTS * Qualification Highlights * Must have 2+ years' experience as a Dirt Equipment Operator. * Must possess all Knowledge Skills and Abilities for positions (see below). * Must be able to meet all physical requirements. * May be required to have a valid driver's license and meet a motor vehicle records check. * Must have all required tools. * Must have reliable transportation. * Position Responsibilities * Will operate various construction dirt equipment to move the earth in precision processes. * Will inspect equipment. * Will be responsible for all safety aspects of operating the equipment. * May follow signal directions from a signaler in equipment operations. * Will access area of operations for safety issues and required processes and planning of equipment operations. Required Knowledge, Skills and Abilities * Must have experience and knowledge of operating varies construction equipment including but not limited to bob cats, bulldozers, excavators, front-end loaders, back hoes, rollers, and graders. * Must have basic mechanical knowledge and illustrate the abilities to inspect equipment. * Must have knowledge of and be familiar with soil types. * Must illustrate knowledge of excavating and the specifications that are required for a given excavation. * Must be able to follow instructions correctly. * Must be reliable, accountable, and consistent in performing administrative processes such as but not limited to equipment inspection paperwork. * Must be willing and able to follow all instructed safety regulations. * Must be able to make it to work on time and work the designated schedule and any overtime as needed with the proper notification. Preferred Additional Qualification * Current Zachry or Zachry ROF'ed employee. * Former experience working with Zachry Industrial, Inc. * Valid Driver's License. Reporting to: * This position does not have any direct reports. Physical Requirements * Employee will be required to adhere to large amounts of sitting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Must be able to pass a visual acuity assessment. Must be able to use fingers in precise coordinated movements. Must have good dexterity in arms, legs, hands, and feet. Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and leather work boots. Required Tools * Raincoat * Rain Boots ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. CERTIFICATIONS AND/OR LICENSES REQUIRED * * None OTHER POSITION OR SITE REQUIREMENTS Must have Forklift experience. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.

**About Austin Industrial** Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of 4,000 employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost-efficiency. **Warehouse** Must be able to maintain production and distribution of product by pulling orders from inventory; delivering production materials and supplies; staging finished product for shipping; moving and organizing inventory as needed; operating machinery to move items. Other duties may be assigned. **Specific Duties and Responsibilities:** + Maintains inventory by identifying, labeling, and placing materials and supplies in stock; recording location of inventory. + Able to lift and maneuver packages of a minimum of 50 lbs. using appropriate equipment and/or assistance from another person. + Locates materials and supplies by pulling and verifying materials and supplies listed on production orders. + Maintains in-process inventory at work centers by delivering and opening materials and supplies. + Documents materials and supplies disposition by recording units delivered and location of units. + Prepares finished stock for shipment by identifying, pulling, packing, crating, loading, and securing products. + Documents product shipment by recording units shipped. + Maintains material-handling equipment by completing pre-use inspections and making operator repairs. + SAP experience. + Other duties as assigned. + Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. **Qualifications Required for this Position:** **Education:** no minimum education requirements. **Certifications/Licenses:** Valid Driver's License **Experience: 2 years warehouse experience** **Benefits & Compensation** We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to ********************************************************* . **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (****************************************************************************************** and Spanish (******************************************************************************************** . **About Austin Industrial** Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** **Qualifications** **Licenses & Certifications** **Required** + Valid Driver's License **Experience** **Required** + 3 years: 3 years' experience in warehouse Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

About Us We have earned a reputation for leading the industry in turnarounds, specialty welding, construction, pipe fabrication, and maintenance. Backed by a team of talented supervisors and craft professionals, we are prepared to tackle the toughest jobs for clients in the refining, chemical, petrochemical, renewables, and midstream industries. Job Summary Crane operators must have industrial crane operating experience in a petrochemical or related industrial fabrication facility. Responsibilities may include: Operating crane under supervision, inspect crane on routine basis, Lift, position and place machinery, equipment or other large objects at construction sites and industrial facilities, Operate crane according to signals, Place blocks and outriggers to prevent capsizing when lifting heavy loads, read load charts and calculate lift requirements per manufacturer requirements, and ensure load is safely attached to crane prior to lift. Requirements NCCER or NCCCO certification for type of crane operating. Must pass Repcon Crane operator and Rigging craft test. Current Basic Orientation Plus (Safety Council Card) or within 3 months expiration. Current TWIC card Have three (3) or more years' experience in your craft. Follow established job-site safety and work regulations, as well as maintaining a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards. Physical Requirements Must be able to Pass a DOT Physical. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. #REPCON Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Performs all general required tasks as directed by the Superintendent and General Foreman. Performs all tasks within proper safety guidelines, company guidelines, and as directed by management. Performs assignments according to company schedule and as expected by the customer. Performs janitorial tasks based on defined scope of work and customer requests. These are performed to published schedules and within explained guidelines. These tasks often include the following: Loading and unloading into buses and company vans. Uneven walking surfaces (i.e. Gravel parking lots) Climbing/Sweeping/ Mopping of stairs Working with industrial strength chemicals Bending to empty and re-line trash receptacles Lifting and carrying multiple large bags of trash to dumpster Lifting boxes of supplies (i.e. Toilet paper, paper towels) Sweeping and mopping large areas Sweeping with dust mops Vacuuming large, carpeted areas Lifting mop bucket with water and cleaner inside Dusting areas as needed. Bending to clean toilets Bending to get supplies from cabinet under sinks. Cleaning counter tops and tables Clean microwaves and coffee bars Dusting and cleaning water coolers Cleaning windows and glass surfaces Cleaning walls and doors. Cleaning smoking areas as requested by building managers. Lifting items 50 lbs or less Moving of chairs and tables Pushing/Pulling Janitorial cart Exposure to high temperatures and weather Cleaning of Laboratory areas (potential exposure to other chemicals) Creating weekend schedules and managing a team of janitors JOB REQUIREMENTS Must have steel toe boots with defined heel Must have Drivers License List of Chemicals being use: Clorox Clean-up with Bleach Bleach Lysol Disinfectant spray Lysol Toilet Bowl Cleaner Pledge Furniture Polish Mr. Clean All Purpose cleaner Glass Cleaner with Ammonia Lime Away Comet ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.

Welder - Combination This person must be able to join metal parts, such as pipe or metal plates as specified by layout, blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned. Specific Duties and Responsibilities: + Uses spot welding gun or hand, electric, or gas welding equipment to weld or tack weld pieces together. + Unites pipes from torch to tanks of oxygen and fuel gas and turns valves to release mixture. + Reaching expected temperature, size, and color of flame by burning torch and adjusting flow of gas and air. + Preheats work pieces for the preparation of welding or curving, using torch. + Fills holes or corrects mistakes in lead pieces and makes bulges thin and curves in metal work pieces. + Checks the weakness of work pieces and measures work pieces with straightedge or template to ensure the piece meets specifications. + Climbs up ladders or works on scaffolds to take apart textures. + Gives signal to crane operator to lift large work pieces. + Uses thermal-cutting equipment such as flame-cutting torch or plasma-arc equipment to dismount metal assemblies or cut scrap metal. + Uses hoist, crane, wire and banding machine, or hand tools to place and protect work pieces. + In order to protect the torch chooses place of weld based on type, thickness, area, and expected temperature of metal. + Instructs and brings flame or electrodes on or across work piece to straighten, curve, dissolve, or develop metal. + Joins pieces together, covers up taut points, and adds metal to develop parts. + Other duties as assigned. + Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. Qualifications Required for this Position: **Education** - no minimum education requirements. **Experience** - 3-5 years of Journeyman level experience. **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. **Benefits & Compensation** We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to ********************************************************* . **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (****************************************************************************************** and Spanish (******************************************************************************************** . **About Austin Industrial** Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** **Qualifications** **Licenses & Certifications** **Required** + Valid Driver's License **Experience** **Required** + 4 years: Industrial Combo Welder Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Zachry Engineering Group is currently looking for applicants for upcoming employment opportunities of talented Project Engineers to join our Project Management Department in Corpus Christi, TX. This is a great opportunity to get involved in interesting and challenging design projects for clients in various industries, predominantly in the petrochemical and new energy industries. · Bachelor's degree in engineering. · 5 to 15 years of experience in the petrochemical or refining industry. · Strong communication and interpersonal skills are required to provide effective intra and inter-discipline coordination on projects, as well as effective communication with clients and vendors. · Must be organized, self-directed, able to prioritize and multi-task, work in a team environment and take direction from others. · Willingness to learn and work on a variety of tasks within multiple industries. · This is a Full time in-office position, but must have flexibility to travel and work in office and field environments as required by assignment. PHYSICAL DEMANDS Employees will be required to communicate in person, via telephone, email, video chat and software systems. Position will include visits to construction sites and industrial facilities requiring mobility (on ground and at heights) and the use of personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and work boots WORK ENVIRONMENT Employees will work in multiple environments including an office, operating process plants, as well as a warehouse, and trailer or building on construction sites. At operating plants or construction sites, noise levels will be moderate to high. Job site will contain: light to heavy equipment vehicles, small to large equipment, materials, communication equipment and tools, people standing, walking, sitting, signaling, and talking, bells, whistles, and alarms. The above description covers the fundamental responsibilities of the Project Engineer position. It shall not be construed as a complete listing of all miscellaneous, incidental, or similar duties which may be required from day-to-day. ZACHRY GROUP is dedicated to providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. #LI-DS1 · Support the Senior Project Manager in planning, organizing, and controlling assigned aspects of a project, including monitoring project schedules and budgets, evaluating project productivity and quality, and directing the complete technical operations of the project. · Implement assignments and activities delegated from the Senior Project Manager. · Responsible to define the work scope and prepare overall schedules and budgets on small projects. Update schedules and implement corrections or adjustments when necessary. · Assist in developing cost estimates for additional work or contract modifications. · Coordinate discipline engineering activities for development of engineered deliverables. · Review engineered drawings for consistency with work scope and adequately address input from disciplines. · Assist discipline leads in coordinating engineering and design efforts, activities, and deliverables from overseas HVE office. · Facilitate Zachry Group's quality control procedure for deliverable generation, archiving, and distribution/transmittal. · Ensure field trip reports and meeting minutes are completed accurately and in a timely manner. · Review reports to ensure consistency with contractual requirements. · Responsible for distributing all correspondence to the appropriate project members. · Ensure that all work hour control is being implemented properly; Engineering Change Notices are being identified and reported to the Senior Project Manager. · Prepare progress reports. · Support preparation of interactive planning sessions for scheduling engineering activities. · Review and evaluate staff expenditures and implement corrective actions or adjustments as required to address overall performance efficiencies for the engineering team. · Update, inform and clarify project outcomes, deliverables, potential problems, and project needs. · Other duties as assigned

About Us We have earned a reputation for leading the industry in turnarounds, specialty welding, construction, pipe fabrication, and maintenance. Backed by a team of talented supervisors and craft professionals, we are prepared to tackle the toughest jobs for clients in the refining, chemical, petrochemical, renewables, and midstream industries. Job Summary Iron Worker Iron Workers must have knowledge of rigging, and flame cutting. Must possess the ability to use pneumatic tools, have knowledge of safe loads, be familiar with basic hand signals, and have experience with sizing of chokers. Will need to have knowledge of basic steel erection. Be aware of fall protection and prevention safety measures. Responsibilities may include: Erect and connect steel at and above grade elevations Practice proper rigging technique Use proper hand signals to flag cranes Assist other craft workers as needed REPCON Required Qualifications: Pass a REPCON Iron Worker Assessment Pass a REPCON Basic Rigging Assessment, or NCCER certified. Current Basic Orientation Plus (Safety Council card) or within 3 months expiration. Current TWIC Card Have three (3) or more years' experience in your craft. Demonstrated industrial construction/maintenance work history and experience. Fully comprehend and accurately interpret blueprints, construction drawings, technical manuals, and manufacturers' manuals and instructions. Good problem-solving abilities and reading comprehension. Ability to work with others and serve as a team player, while being able to work independently with minimal supervision. Good communication skills (speaking and actively listening) with co-workers and supervisors. Physical Requirements Significant and sustained periods of standing, walking, bending, squatting and lifting. Must have good manual dexterity to perform precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. #REPCON Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

* THIS IS MAINTENANCE*NO PER DIEM* * Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. * Locates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments. * Removes defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts. * Determines changes in dimensional requirements of parts by inspecting used parts; using rules, calipers, micrometers, and other measuring instruments. * Adjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. * Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. * Fabricates repair parts by using machine shop instrumentation and equipment. * Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt. * Conserves maintenance resources by using equipment and supplies as needed to accomplish job results. * Provides mechanical maintenance information by answering questions and requests. * Prepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends. * Maintains technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks. * Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. * Maintains safe and clean working environment by complying with procedures, rules, and regulations. * Contributes to team effort by accomplishing related results as needed. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.

Zachry Engineering Corporation (ZEC) is currently looking for a talented Senior Project Manager to join our Project Management Department in Corpus Christi, Texas. This is a great opportunity to get involved in interesting and challenging design projects for clients in the Oil, Gas, and Chemical process industries.

* Following established ISO and QAKE 19 certifications and procedures. * Training, interacting and communicating with other Laboratory personnel, Operations and warehousing personnel in a professional manner. * Performing quality control testing and reporting of in-process samples to support the compliant operations of the plant. * Ensuring documentation of laboratory activities including the use of logbooks, databases, Laboratory Information Management System, check sheet, etc. * Operating, maintaining, and providing troubleshooting information using a wide range of laboratory equipment including automated viscometers, volumetric titrator, TOC analyzers, spectrophotometers, KF titrator, etc. * Ensuring and maintaining adequate laboratory supply inventory, cleanliness of lab areas and to ensure organization and safety.

About Us We have earned a reputation for leading the industry in turnarounds, specialty welding, construction, pipe fabrication, and maintenance. Backed by a team of talented supervisors and craft professionals, we are prepared to tackle the toughest jobs for clients in the refining, chemical, petrochemical, renewables, and midstream industries. Job Summary Review safety audits and concerns with the Craft Participate at safety Always execute good housekeeping habits. Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet Examines blueprints, sketches or building plans to determine material required and dimensions of structure or fixture to be Selects, loads, and hauls job material to work Prepares layout of form or fixture to be fabricated using lines or Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and Shapes materials to required sizes using saws, chisels, and planes. Verifies accuracy of structure with transit, plumb bob, square and Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry Nails cleats (braces) across boards to construct concrete-supporting Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and Erects framework for structures and lays sub-flooring. Cuts and assembles timbers to build trestles and Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and Constructs forms, chutes, and aligns form panels for pouring concrete and Fits and installs prefabricated window frames, doors, weather stripping interior and exterior trim and finished Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor Performs minor maintenance or cleaning activities with tools and Ability to tie Operation of electric and pneumatic May rig materials. Responsible for observing and complying with all safety and project Performs other duties as required. Maintain a constant working relationship with fellow Must perform all duties in a safe and efficient Must be able to follow oral and written Must have good communication skills, such as clarity of speech and proper use of radio communication. Work within precise limits or standards of Apply shop mathematics to solve Plan work and select proper Compare and see differences in the size, shape and form of lines, figures and Visualize objects in three dimensions from plans and Make decisions based on measurable Work at heights without Must be willing to assist other employees in completing assigned Must be familiar and have a basic understanding of ladder and scaffold Must have math skills necessary to accomplish tasks in No limiting physical restrictions as needed to accomplish required Keep good balance and have no fear of See and hear well (either naturally or with correction) Coordinate the use of hands, eyes, and Maintain physical strength and Use arms, hands, legs, fully; push, pull and frequently lift and carry objects weighing in excess of 100 pounds; and stoop, kneel, crouch, crawl, and We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. #REPCON Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

. No Per Diem. An Industrial Mechanic will install, assemble, dismantle, maintain, troubleshoot, and repair machinery at an Industrial Power Plant. They will work on small engines, motors, pumps, and other mechanical machinery. Responsibilities JOB REQUIREMENTS Position Responsibilities Works with industry-specific and high complex equipment Will plan, inspect, verify and document the scope of work Will replace gaskets and other defective parts on machinery. Will dismantle machines using hammers, wrenches, crowbars and other hand tools Assembles and installs equipment such as shafting, conveyors and tram rails Assembles machines and bolts, welds, rivets and fastens machinery to foundations or other structures using hand tools and power tools. Operates engine lathes, grinders, and files. Fabricates and installs parts, equipment and machinery by measuring, cutting, drilling and/or welding Turns machine parts to dimensional specifications Will unload, inspect, move and set equipment into position using cranes, hoists, dollies, rollers and trucks Uses rigging and hoisting devices such as chokers, chain falls and come along to move equipment / materials into place Conducts preventative maintenance such as lubrication and fixing or repairing worn parts. Follows direction from supervisor along with other duties as assigned Required Knowledge, Skills, and Abilities Demonstrated industrial construction/maintenance history experience Knowledge of hand tools, and power tools. Knowledge of industrial machinery and equipment Understand load properties of cables, ropes, hoists, and chains. Organization and time management. Good problem-solving abilities. Good aptitude and manual dexterity. Worked in a chemical facility and understands the hazards. Knowledge of math concepts, geometry, and layout. Demonstrated ability to lead others and provide detailed instructions. Good reading comprehension. Ability to work with others - team player. Ability to work independently - minimal supervision. Good communication skills with co-workers and supervisors. Commitment to Zachry values and safety rules and regulations. MUST PASS A DISA BACKGROUND CHECK, A DRUG TEST, AND HAVE A VAILD DRIVER'S LICENSE. Qualifications Preferred Qualifications Zachry ROF'ed employee. Former Zachry Employee. Basic Computer efficiency Formal/technical education. NCCER in Mechanical. At least 5 years' experience working in an industrial chemical facility. Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. ZACHRY is dedicated to providing a Safe and Drug-Free work environment and is an Equal Opportunity Employer. #LI-SV1

About Us We have earned a reputation for leading the industry in turnarounds, specialty welding, construction, pipe fabrication, and maintenance. Backed by a team of talented supervisors and craft professionals, we are prepared to tackle the toughest jobs for clients in the refining, chemical, petrochemical, renewables, and midstream industries. Job Summary Combination Welders must have industrial welding experience in a petrochemical or related industrial fabrication facility. Welders having the ability to read and interpret blueprints, ISO's, field drawings, and material takeoffs a plus. Welders will perform a range of duties which will include but is not limited to welding various metals using processes such as SMAW, GMAW, FCAW, and GTAW. Welders are responsible for selecting, setting up, and staging the proper equipment for their jobs and that each are in ample supply and working order. This includes welding machines, gases, tools, and other consumables. Welders are also responsible for double checking the fit of pipe or other structural pieces and to allow for proper attachment. Attention to safety and detail are of the utmost importance. Welders must successfully pass pre-employment weld tests as part of the on-boarding process. Requirements Industrial Combo welding experience with GTAW and SMAW. Must pass GTAW & SMAW manual welding procedures test. Current Basic Orientation Plus (Safety Council Card) or within 3 months expiration. Current TWIC card Have three (3) or more years' experience in your craft. Compliance with designated welding procedures and specifications. Follow established job-site safety and work regulations, as well as maintaining a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards. Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code. Produce quality work, meeting requirements of plans, specifications and industry standards. Physical Requirements Significant and sustained periods of standing, walking, bending, squatting and lifting. Good communication skills (speaking and actively listening) with co-workers and supervisors. Must have good manual dexterity to perform precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. #REPCON Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

* THIS IS MAINTENANCE* NO PER DIEM* Must be able to prepare surfaces by means of abrasive blast, and power tool cleaning according to paint manufacturer surface prep recommendations. Industrial Journeyman Painter will paint equipment and structures for protection and cosmetic purposes. The position will also be required to maintain, mix, and have thorough knowledge of paint and other coating material so that to ensure the equipment or structure is painted and protected as per contract or specifications. Qualification Highlights Must have all Knowledge Skills and Abilities required (see below). * Must be willing to assist other crafts while not actively working on a painting project. * Must be able to meet all physical requirements. * Must be able and willing to follow all safety rules and regulations. * Must have all required tools. * Must have reliable transportation. Position Responsibilities * Identify all tools required for tasks. * Identify safety risks and the precautions required to eliminate those risks. * Identify and mix paint and coatings as required. * Know the proper use and techniques (stroke types) required per the paint/coating used and the item being painted or coated. * Must be able to work at heights and off of ladders and scaffolds safely. * Clean up work areas. JOB REQUIREMENTS Required Qualifications * Must have 4+ years working as a Painter or Painter Helper on an industrial construction project. * Must have knowledge on materials, tools, and processes involved with basic painting techniques and knowledge of paint qualities. * Must be able to identify the relationship to materials to be painted and the technique, mixture, and number of coatings required. * Must have reliable transportation. * Must be able to work full work schedule and any additional overtime with little to no notification. * Must be willing to work safely and follow all safety rules and regulations. * Must follow all company and site rules and regulations. * Must have required tools. Preferred Additional Qualifications * Former experience working with Zachry Industrial, Inc. * National Center for Construction Education and Research's (NCCER) certification for Industrial Journeyman Painter. * Formal/Technical education. * Some experience working with scaffolding, insulation, airless painting. Physical Requirements * Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. * Will talk and hear to communicate. * Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. * May be required to lift, carry and move up to 50lbs. * Will work at heights, climb ladders and stairways, work off of platforms and man lifts, and may occasionally work out on an open structure using the appropriate fall protection requirements. * Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and leather work boots. Required Tools * 1 - Metal Tool Box with Lock * 1 - Pair of channel locks * 1 - 25' or 30' Tape Measure * 1 - 12" Crescent Wrench * 1 - Phillips Screwdriver * 1 - Flathead Screwdriver * 1 - Wet mil gauge * 1 - 7/8" Open end/Box Wrench ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.

The project completions manager role is a critical role required on mega projects. The Project Quality Completions Manager will be responsible for the management of the project completions database and Quality Completions team. The responsibilities of this role will include cross functional support of the Advanced Work Packaging process (AWP), piping test packages, quality inspections, preservations, engineering data and any other items related to project completions. Qualifications: Associates Degree or equivalent from 2-year college or technical school. 6 years industrial construction experience 2 years management experience Computer Competency (Microsoft Office), Completions Database experience Detailed knowledge and understanding of quality and commissioning practices Working knowledge of QA/QC inspection process - ITP's and related QA/QC documentation requirements Preferred Qualifications: Former experience working with Zachry Industrial, Inc. Previous commissioning or completions manager Bachelor's degree in a construction or technology related field 10 years industrial construction experience Reports to Position: This position reports directly to the project manager and indirectly to the Corporate Quality Completions Manager. This position manages the entire Quality Completions team. The above description covers the fundamental responsibilities of the Project Quality Completion Manager position. It shall not be construed as a complete listing of all miscellaneous, incidental, or similar duties which may be required from day-to-day. Zachry Group is dedicated to providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. #LI-KS1 Job Functions: Coordination of completions activities with project team Manage the quality completions team which can include supervisors, facilitators, and inspectors. Review and understand contractual requirements related to quality and completions Monitor and keep updated on progress of project completions Coordinate in the final walk down of systems and areas with all project stakeholders Complete the assembly of turnover packages for transmittal to client Prepare Systems and Mechanical Completion Certificates Coordinate, define, and execute completions requirements between project team including but not limited to project controls, engineering, craft, client, quality. Essential Skills, Knowledge, and Abilities: Industrial Construction experience Self-motivated Good decision-making abilities Able to troubleshoot and come up with solutions on the fly Ability to work with others - team player Good communication skills with co-workers and subordinates Construction and commissioning knowledge Completions database knowledge Completions management experience

* THIS IS MAINTENANCE*NO PER DIEM* Install, repair and maintain electrical wiring, conduit, equipment and fixtures. Journeyman Electrician I will perform work underground and above ground performing cable and conduit installations. Perform electrical maintenance repairs in an Industrial setting while leading lesser skilled electricians to ensure a safe work environment. Qualification * Must possess a TDLR Journeyman License, or TDLR Masters License, or NCCER Certified Plus Industrial Electrician or completed the ZCAP Journeyman Electrician Qualification program * Must be able to read and interpret prints, drawings, schematics and plans * Thorough knowledge of Electrician hand, power tools and layout tools * Must have required tools * Must be able to work at heights of 300 ft. * Must be able to meet the physical demands and pre-employment conditions * Must have reliable transportation and be able to work 7 days a week JOB REQUIREMENTS Position Responsibilities * Responsible for complying with all Zachry and site specific safety rules with over sight of co-workers to ensure compliance * Responsible for following direction from a Multi-Craft Electrician, General Foreman, Craft Superintendent, Site Superintendent and or Project Manager * Responsible for complying with the Lock, Tag and Try work procedure; this standard applies to the Sweeny Refinery, associated facilities, and outlying terminals. Will have over sight of co-workers within your area of responsibility to ensure compliance * Responsible for inspecting all designated work areas for hazards * Participate in and complete the Zachry Craft Advancement Program (ZCAP) for Electricians per Site established guidelines. * Responsible for performing detailed inspections on hand and power tools to ensure they are safe to operate and in proper working order * Responsible for the safe use of hand and power tools such as conduit benders, screwdrivers, pliers, knives, hacksaws, wire strippers and drills with over sight of co-workers to ensure compliance * Responsible for examining blue prints, sketches, diagrams, building plans and specifications to determine locations of circuits, outlets, load centers, panel boards, wires, conduit, components and other equipment * Responsible for carrying, cutting, bending, connecting and installing conduit as defined in NFPA 70 (NEC 2014) with over sight of co-workers to ensure compliance * Responsible for pulling cables and conductors through specified pathways as defined in NFPA 70 (NEC 2014) with over sight of co-workers to ensure compliance * Responsible for the modification, fabrication and installation of cable trays as required and as defined in NFPA 70 (NEC 2014) with over sight of co-workers to ensure compliance * Responsible for the safe operation of testing equipment to validate connections and ensure capability of circuits using such tools as clamp meters, ohmmeters, voltmeters and harmonics testers with over sight of co-workers to ensure compliance * Responsible for the inspection and testing of all electrical equipment to ensure safe operation and to certify it is operating as intended with over sight of co-workers to ensure compliance * Responsible for the safe installation and maintenance of temporary power systems and their distribution system as defined in NFPA 70 (NEC 2014) with direct over sight of co-workers to ensure compliance * Responsible for the installation and maintenance of the assured equipment grounding / bonding on equipment and facilities with over sight of co-workers to ensure compliance * Responsible for terminating wire/cable to electrical equipment such as but not limited to outlets, switches, breakers, control panels, and distributions systems with over sight of co-workers to ensure compliance * Responsible for observing all state and local building / electrical codes * Responsible for leading the Safety Task Assessment (STA) meetings * Performs other duties as required Essential Skills, Knowledge and Abilities: * Use of mathematics to validate operation and installation methods per NEC 2014 standards * Organization and time management * Active listener * Good decision making skills * Customer service oriented * Ability to work with others - Team player * Good communication skills with co-workers and supervisors * Commitment to Zachry values, safety rules and regulations Physical demands and work environment: * Physical demands: Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to lift, carry and move up to 25lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. * Work environment: Will work in all weather conditions ranging from warm/hot - cool/cold. Occasional rain. Will work at different elevations. Noise levels will be moderate to high. Job site will contain light to heavy equipment vehicles, small to large equipment, materials, communication equipment and tools. People standing, walking, sitting, signaling and talking. Bells, whistles and alarms. Certifications and / or Licenses Required* - * Texas Department of Licensing and Regulation Journeyman Electrician License Or * Texas Department of Licensing and Regulation Master Electrician License Or * NCCER Industrial Electrician Certified Or * Achieved Journeyman Electrician Level Qualification through Zachry Craft Advancement Program (ZCAP) ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer CERTIFICATIONS AND/OR LICENSES REQUIRED * NCCER - Industrial Electrician OTHER POSITION OR SITE REQUIREMENTS MVR NCCER APPRIENTENCE LIENCE ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.

Performs all general required tasks as directed by the Superintendent and General Foreman. Performs all tasks within proper safety guidelines, company guidelines, and as directed by management. Performs assignments according to company schedule and as expected by the customer. Performs janitorial tasks based on defined scope of work and customer requests. These are performed to published schedules and within explained guidelines. These tasks often include the following: * Loading and unloading into buses and company vans. * Uneven walking surfaces (i.e. Gravel parking lots) * Climbing/Sweeping/ Mopping of stairs * Working with industrial strength chemicals * Bending to empty and re-line trash receptacles * Lifting and carrying multiple large bags of trash to dumpster * Lifting boxes of supplies (i.e. Toilet paper, paper towels) * Sweeping and mopping large areas * Sweeping with dust mops * Vacuuming large, carpeted areas * Lifting mop bucket with water and cleaner inside * Dusting areas as needed. * Bending to clean toilets * Bending to get supplies from cabinet under sinks. * Cleaning counter tops and tables * Clean microwaves and coffee bars * Dusting and cleaning water coolers * Cleaning windows and glass surfaces * Cleaning walls and doors. * Cleaning smoking areas as requested by building managers. * Lifting items 50 lbs or less * Moving of chairs and tables * Pushing/Pulling Janitorial cart * Exposure to high temperatures and weather * Cleaning of Laboratory areas (potential exposure to other chemicals) * Creating weekend schedules and managing a team of janitors JOB REQUIREMENTS Must have steel toe boots with defined heel Must have Drivers License List of Chemicals being use: * Clorox Clean-up with Bleach * Bleach * Lysol Disinfectant spray * Lysol Toilet Bowl Cleaner * Pledge Furniture Polish * Mr. Clean All Purpose cleaner * Glass Cleaner with Ammonia * Lime Away * Comet ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.

Zachry Engineering Group is currently looking for applicants for upcoming employment opportunities of talented Project Engineers to join our Project Management Department in Corpus Christi, TX. This is a great opportunity to get involved in interesting and challenging design projects for clients in various industries, predominantly in the petrochemical and new energy industries.

. No Per Diem. An Industrial Mechanic will install, assemble, dismantle, maintain, troubleshoot, and repair machinery at an Industrial Power Plant. They will work on small engines, motors, pumps, and other mechanical machinery. Responsibilities JOB REQUIREMENTS Position Responsibilities * Works with industry-specific and high complex equipment * Will plan, inspect, verify and document the scope of work * Will replace gaskets and other defective parts on machinery. * Will dismantle machines using hammers, wrenches, crowbars and other hand tools * Assembles and installs equipment such as shafting, conveyors and tram rails * Assembles machines and bolts, welds, rivets and fastens machinery to foundations or other structures using hand tools and power tools. * Operates engine lathes, grinders, and files. * Fabricates and installs parts, equipment and machinery by measuring, cutting, drilling and/or welding * Turns machine parts to dimensional specifications * Will unload, inspect, move and set equipment into position using cranes, hoists, dollies, rollers and trucks * Uses rigging and hoisting devices such as chokers, chain falls and come along to move equipment / materials into place * Conducts preventative maintenance such as lubrication and fixing or repairing worn parts. * Follows direction from supervisor along with other duties as assigned Required Knowledge, Skills, and Abilities * Demonstrated industrial construction/maintenance history experience * Knowledge of hand tools, and power tools. * Knowledge of industrial machinery and equipment * Understand load properties of cables, ropes, hoists, and chains. * Organization and time management. * Good problem-solving abilities. * Good aptitude and manual dexterity. * Worked in a chemical facility and understands the hazards. * Knowledge of math concepts, geometry, and layout. * Demonstrated ability to lead others and provide detailed instructions. * Good reading comprehension. * Ability to work with others - team player. * Ability to work independently - minimal supervision. * Good communication skills with co-workers and supervisors. * Commitment to Zachry values and safety rules and regulations. MUST PASS A DISA BACKGROUND CHECK, A DRUG TEST, AND HAVE A VAILD DRIVER'S LICENSE. Qualifications Preferred Qualifications * Zachry ROF'ed employee. * Former Zachry Employee. * Basic Computer efficiency Formal/technical education. * NCCER in Mechanical. * At least 5 years' experience working in an industrial chemical facility. Physical Requirements * Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. * Will talk and hear to communicate. * Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. * May be required to pick up, lift, carry and move up to 50lbs. * Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. * Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. * Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. ZACHRY is dedicated to providing a Safe and Drug-Free work environment and is an Equal Opportunity Employer. #LI-SV1