Electrician jobs at Zachry Construction - 704 jobs

* THIS IS MAINTENANCE*NO PER DIEM* Install, repair and maintain electrical wiring, conduit, equipment and fixtures. Journeyman Electrician I will perform work underground and above ground performing cable and conduit installations. Perform electrical maintenance repairs in an Industrial setting while leading lesser skilled electricians to ensure a safe work environment. Qualification * Must possess a TDLR Journeyman License, or TDLR Masters License, or NCCER Certified Plus Industrial Electrician or completed the ZCAP Journeyman Electrician Qualification program * Must be able to read and interpret prints, drawings, schematics and plans * Thorough knowledge of Electrician hand, power tools and layout tools * Must have required tools * Must be able to work at heights of 300 ft. * Must be able to meet the physical demands and pre-employment conditions * Must have reliable transportation and be able to work 7 days a week JOB REQUIREMENTS Position Responsibilities * Responsible for complying with all Zachry and site specific safety rules with over sight of co-workers to ensure compliance * Responsible for following direction from a Multi-Craft Electrician, General Foreman, Craft Superintendent, Site Superintendent and or Project Manager * Responsible for complying with the Lock, Tag and Try work procedure; this standard applies to the Sweeny Refinery, associated facilities, and outlying terminals. Will have over sight of co-workers within your area of responsibility to ensure compliance * Responsible for inspecting all designated work areas for hazards * Participate in and complete the Zachry Craft Advancement Program (ZCAP) for Electricians per Site established guidelines. * Responsible for performing detailed inspections on hand and power tools to ensure they are safe to operate and in proper working order * Responsible for the safe use of hand and power tools such as conduit benders, screwdrivers, pliers, knives, hacksaws, wire strippers and drills with over sight of co-workers to ensure compliance * Responsible for examining blue prints, sketches, diagrams, building plans and specifications to determine locations of circuits, outlets, load centers, panel boards, wires, conduit, components and other equipment * Responsible for carrying, cutting, bending, connecting and installing conduit as defined in NFPA 70 (NEC 2014) with over sight of co-workers to ensure compliance * Responsible for pulling cables and conductors through specified pathways as defined in NFPA 70 (NEC 2014) with over sight of co-workers to ensure compliance * Responsible for the modification, fabrication and installation of cable trays as required and as defined in NFPA 70 (NEC 2014) with over sight of co-workers to ensure compliance * Responsible for the safe operation of testing equipment to validate connections and ensure capability of circuits using such tools as clamp meters, ohmmeters, voltmeters and harmonics testers with over sight of co-workers to ensure compliance * Responsible for the inspection and testing of all electrical equipment to ensure safe operation and to certify it is operating as intended with over sight of co-workers to ensure compliance * Responsible for the safe installation and maintenance of temporary power systems and their distribution system as defined in NFPA 70 (NEC 2014) with direct over sight of co-workers to ensure compliance * Responsible for the installation and maintenance of the assured equipment grounding / bonding on equipment and facilities with over sight of co-workers to ensure compliance * Responsible for terminating wire/cable to electrical equipment such as but not limited to outlets, switches, breakers, control panels, and distributions systems with over sight of co-workers to ensure compliance * Responsible for observing all state and local building / electrical codes * Responsible for leading the Safety Task Assessment (STA) meetings * Performs other duties as required Essential Skills, Knowledge and Abilities: * Use of mathematics to validate operation and installation methods per NEC 2014 standards * Organization and time management * Active listener * Good decision making skills * Customer service oriented * Ability to work with others - Team player * Good communication skills with co-workers and supervisors * Commitment to Zachry values, safety rules and regulations Physical demands and work environment: * Physical demands: Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to lift, carry and move up to 25lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. * Work environment: Will work in all weather conditions ranging from warm/hot - cool/cold. Occasional rain. Will work at different elevations. Noise levels will be moderate to high. Job site will contain light to heavy equipment vehicles, small to large equipment, materials, communication equipment and tools. People standing, walking, sitting, signaling and talking. Bells, whistles and alarms. Certifications and / or Licenses Required* - * Texas Department of Licensing and Regulation Journeyman Electrician License Or * Texas Department of Licensing and Regulation Master Electrician License Or * NCCER Industrial Electrician Certified Or * Achieved Journeyman Electrician Level Qualification through Zachry Craft Advancement Program (ZCAP) ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer CERTIFICATIONS AND/OR LICENSES REQUIRED * NCCER - Industrial Electrician OTHER POSITION OR SITE REQUIREMENTS MVR NCCER APPRIENTENCE LIENCE ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. #LI-KL1

\*\*Start ASAP - Job is located in Altus, OK The full job description covers all associated skills, previous experience, and any qualifications that applicants are expected to have. \*\*Requirements:\*\* - Minimum 5 years of commercial electrician experience. - 100% travel required. - Must pass drug screen. - Must be able to pass background check and security clearance for Air Base - Must have Oklahoma Journeyman License or willing to reciprocate to Oklahoma \*\*NO ADVANCES - YOU MAKE YOUR OWN HOTEL ARRANGEMENTS.\*\* \*\*Perks:\*\* - Weekly direct deposit. - Yearly loyalty bonuses. - Permanent position with free health & dental insurance after 5 years (employee only). - IRA retirement plan (we match up to 3%). \*\*About Us:\*\* All Star Electric, LLC has over 20 years of experience and is based out of Grove, OK but operates nationwide. We provide commercial & light industrial electrical services. Including new construction and remodeling for clients such as big box retailers, municipalities, police stations, K-12 schools, paper mills, auto manufacturing plants, & general industrial companies. \*\*Contact:\*\* Questions? Email or call our office at **************. *Responsibilities* * Oversee and coordinate electrical installations and repairs on commercial projects. * Utilize hand tools, power tools, and testing equipment such as voltmeters and ohmmeters to ensure compliance with NEC standards. * Read and interpret blueprints and schematics to execute electrical layouts accurately. * Collaborate with construction teams to ensure timely project completion and adherence to safety protocols. * Provide guidance and training to junior electricians and apprentices on best practices in electrical work. Job Type: Full-time Pay: $54.54 per hour Expected hours: 40 per week Benefits: * Dental insurance * Health insurance * Paid time off * Retirement plan Application Question(s): * Are you able to pass a pre-employment drug screen? *Medical marijuana cards do not exempt you from this requirement.* * Are you able to pass a background check? * Do you have security clearance for a Air Base? xevrcyc * Which state is your valid Journeyman Electrician License out of? * Are you willing to reciprocate your valid Journeyman Electrician License to Oklahoma if eligible? License/Certification: * Journeyman Electrician License (Required) Willingness to travel: * 100% (Preferred) Work Location: On the road

Founded in 1906, over the last 110+ years' CEMEX has grown into a global building materials company that provides high quality products and reliable service to customers and communities throughout the Americas, Europe, Africa, the Middle East, and Asia. Here at CEMEX we offer our employees competitive wages, career growth, excellent benefits including health, dental & vision plans, vacation or paid time off, employee assistance program and retirement plan options, along with over a century of stability to build your next career on! To learn more about our company culture and why you should join us, visit us at ************************* For direct access to CEMEX Career Opportunities, visit us at ************************ Job Summary An electrician performs all types of electrical jobs throughout assigned locations or region. Electrical jobs include maintenance and installation of equipment and machinery used in production and manufacturing. Job Responsibilities Perform electrical work and repairs on industrial/mining equipment Install, adjust and maintain all electrical equipment, gauges and instruments Troubleshoot, evaluate and coordinate electrical needs, repairs and modifications Ensure that manufacturers standards of repair and maintenance are performed on all equipment Perform additional responsibilities as requested or assigned Maintain good housekeeping Adhere to all CEMEX, OSHA, and MSHA rules and regulations at all times Wear proper safety equipment while on plant grounds Meet or exceed company safety standards Perform other job responsibilities as assigned by management Qualifications 5 years electrical maintenance experience 3 years experience in aggregate, cement or heavy industrial operations preferred Power distribution experience or understanding up to 4,160 volts Programmable logic control and digital drive experience High school graduate Prefer associates degree or equivalent in electrical maintenance experience Able to read, write, and speak English Bilingual a plus 5 years electrical maintenance experience 3 years' experience in aggregate, cement or heavy industrial operations preferred Power distribution experience or understanding up to 4160 volts Programmable logic control and digital drive experience High school graduate. Prefer Associates Degree or equivalent in electrical maintenance experience Be able to read, write, and speak English Bilingual a plus Knowledge, Skills, and Abilities Computer literate and able to use existing systems and grow into company networked program of Word, Excel, PowerPoint, and Lotus Notes. SAP experience is a plus Excellent communication skills and attention to details Strong analytical/problem solving skills Able to read and understand English sufficiently to be able to read technical information contained in manuals, reports and related instructions Able to develop, read and use mechanical, electrical and structural sketches, blue prints and drawings Good mathematic/mechanical aptitude Working Conditions Continuous exposure to extreme heat, extreme cold, extreme noise, and working outdoors Must wear protective equipment while at the location Electrical troubleshooting skills and experience with motor control circuits and relay logic Able to prioritize tasks and work as a team member, as well as individually Physical Requirements Must be able to perform all job functions which include, but may not be limited to walking, sitting, lifting, pushing, pulling, turning, climbing to a significant degree, and/or pulling of controls Heavy Work: Exerting up to 50 pounds of force occasionally, and /or up to 20 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees/visitors as well as function safely around heavy rolling equipment Requires walking, sitting, lifting, pushing, pulling, and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and /or up to 20 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees/visitors as well as function safely around heavy rolling equipment Must be able to perform all job functions which include, but may not be limited to, pushing, turning, and/or pulling of controls Legal Notices CEMEX is an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. CEMEX will consider for employment qualified applicants with criminal histories in a manner consistent with all local, state and federal laws. CEMEX is an E-Verify participating employer. Arizona Smoke-Free Act. CEMEX complies with the State of Arizona's Smoke-Free Act (Arizona Revised Statutes § 36-601.01). Smoking and/or the use of tobacco or related products is prohibited in and on CEMEX property as well as any building and/or vehicle owned or leased by CEMEX. CEMEX offers both competitive pay and benefits. Benefits applicable to this position may include, but are not limited to, medical, dental, vision, 401(k), Paid Time Off, and Holiday Pay, as well as a comprehensive wellness program to help keep employees and their families healthy and well. You can learn more about CEMEX Benefits by visiting the CEMEX USA Benefits and Well-Being page. (******************************************************************** EEO Statement - En Español CEMEX es una institución EEO/AA (igualdad de oportunidad/acción afirmativa) y no discrimina en base al sexo, edad, raza, color, religión, discapacidad física o mental, credo, origen nacional, estatus veterano, orientación sexual, información genética, identidad de género, o expresión de género en los programas o actividades los cuales opera.

Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year, having no signs of slowing down. Our company grew through challenging and interesting opportunities that placed us in ENR's (Engineering News-Record) top 50 electrical contractors nationwide! Join Ace Electric for a chance to work with a highly supportive and proficient team, as well as build your career with Ace University! We value the hard work of our employees, always striving to enhance skills and a positive employee workplace. Since our inception in Valdosta, GA in 1975, Ace has been performing quality electrical installations in a full range of markets including: commercial, mission critical, education, healthcare, institutional, industrial, correctional facilities, hospitality, military bases, retail and others. In the past 15 years, locations have been added in Macon, GA, Atlanta, GA, Jackson, TN, Statesboro, GA, Sanford, NC and Plain City, OH. Ace offers fabrication services, hard bid, design-build, negotiated contracts and fee-based work. We have the resources, professional staff and project management team to handle almost any type of electrical project. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year and has no signs of slowing down! Our Mission is to Identify, Hire, Train and Retain the very best people! Could that be you? Benefits: Health, Dental, Vision, Life, Disability, Accident and Critical Illness Insurances 401k with Match Access to Ace University: Apprenticeship Program, Leadership Training, Skill Building Classes and much more! General Summary: The Foreman will support the Superintendent or Project Manager in the oversight of the operations and field personnel responsible for the installation, additions, and/or repairs of electrical systems, conductors, and associated materials/equipment for the assigned job. The Foreman functions as a crew leader or team lead on Job Project tasks or on smaller jobs. Preferred Job Skills: Strong commercial and industrial electrical background. Strong troubleshooting skills utilizing sophisticated test equipment (DMM, Megger, PQM, UCT, IR Camera, etc.). Strong knowledge of the National Electric Code (NEC). Ability to safely operate and maintain a specialized electrical service vehicle. Able to maintain professional appearance and conduct at all times. Able to demonstrate necessary computer and keyboard skills. OSHA 30 Hour, CPR, and First Aid trained. Ability to manage customer and company specific information and documentation in an organized manner. Able to maintain high levels of productivity, meeting deadlines while maintaining accuracy. Must be an effective and professional communicator, both written and verbally. Able to be on twenty-four hour call on a rotating basis, as needed. Mandatory Hiring Requirements: References, Background Check, Drug Screen Testing, Valid Driver's License. Responsibilities: Responsible for leading and directing all field personnel involved in the assigned project or task. Responsible for the planning of the project or task in the most efficient and profitable manner. Ensure all materials are ordered and received in a timely manner to ensure compliance. Necessary to have and maintain certain personal tools as directed by leadership. Will read and comply with all guidelines provided in the Employee Handbook, Safety Manual, or Policy and Procedure Manual, and will require any field employees under their leadership to do the same. All other duties as assigned. Position Requirements: License: Valid state driver's license. Certification: None required. Education: High School Graduate/GED required. Experience: Minimum of 2 years electrical experience preferred. Working Conditions: Job requires working in all elements, depending on job location, time of year, heat, cold, rain, or snow. Job requires employee to have required personal tools with him at all times (waist tool belt as worn weighs approximately 30 lbs.). Work from all types of ladders and be able to transport/relocate ladders unassisted. Employee's personal weight with tools cannot exceed the rated weight capacity of ladders used. Perform work at various heights, up to 90 feet from ladders, scaffolds, aerial lifts, cat walks and other safe work areas. Work in restricted areas (switch gear-room, manholes, utility tunnels and crawl spaces). Wear personal protective equipment as required. Able to work 40 hours per week plus overtime as required, to include night shifts. Required Physical/Mental Functions: Positively identify colors of wire and other items as required. Comprehend reading of blueprints drawings, and schematics same. Comprehend and practice safe work procedures as outlined in Company Safety Handbook. Operate company truck with manual and automatic transmission. Read and interpret maps, instructional manuals, work site directions, and written instructions. Must hear and see well (either natural or with correction). Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead. Able to lift objects weighing up to 50 pounds, with frequent lifting and carrying of objects weighing up to 20 pounds. Tolerant to prolonged standing and movement on foot. Climb ladders (all types). Repetitive use of arms, hands, and fingers AAP/EEO Statement: Ace Electric, Inc. is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identification, national origin, disability status, protected veteran status, or any other category protected by federal, state, or local law.

We are seeking a skilled Industrial Electrician to join our maintenance team. The ideal candidate will be responsible for installing, maintaining, and repairing electrical systems and equipment within our steel manufacturing facility. This role requires strong technical knowledge, attention to detail, and adherence to safety standards. ABOUT US: SME Steel Contractors has provided comprehensive structural steel fabrication and erection since 1992 and is one of the largest fabricators/erectors of structural steel in the United States. Driven to be different from all others, SME is a division 5 company with a commitment to safety, value, and innovation. Visit ********************* to learn more. SME Steel Contractors is a division of SME Industries, Inc. Why Join Us? Health and Wellness Benefits including Medical, Dental, Vision, Short Term Disability and Life Insurance. Financial Benefits including competitive compensation and 401(k) plan. Additional Benefits including Paid Holidays and Paid Time Off, Employee Assistance Program, and more. ESSENTIAL DUTIES AND RESPONSIBILITIES: Install, troubleshoot, and repair electrical systems, machinery, and control panels. Perform preventive maintenance on electrical equipment to minimize downtime. Read and interpret electrical schematics, blueprints, and technical diagrams. Ensure compliance with local, state, and federal electrical codes and safety regulations. Collaborate with maintenance and production teams to support plant operations. Respond promptly to emergency breakdowns and perform root cause analysis. Follow all safety procedures and wear required personal protective equipment (PPE). Perform other duties as assigned. QUALIFICATIONS: Must be able to perform each essential duty daily. High school diploma or equivalent; technical certification or journeyman license preferred. Minimum 2 years of experience as a master electrician in an industrial or manufacturing environment. Strong knowledge of electrical systems, PLCs, and motor controls. Ability to work independently and as part of a team in a fast-paced environment. Excellent problem-solving skills and attention to detail. PHYSICAL DEMANDS: Must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Ability to lift and carry up to 40 lbs. Must be able to stand, bend, twist, and reach for extended periods. Physically fit to work in an industrial environment and tolerate exposure to varying physical conditions. Must be able to work extended hours when necessary. WORK ENVIRONMENT: Works in both office and manufacturing environments. Standard office environment will have minimal exposure to temperature changes. Industrial manufacturing environment will have some exposure to temperature changes and work around areas with heavy machinery, forklifts and overhead cranes. Use of PPE such as gloves, eye protection, hearing protection, and steel-toed footwear is required. Interaction with team members, leads, and supervisors is frequent and necessary. Position Responsibilities:This job posting reflects the current assignment of essential functions and is not meant to be all-inclusive. Duties and responsibilities may be assigned or reassigned to this position at any time. Equal Employment Opportunity: SME Industries, Inc. and its divisions (SME Steel Contractors, Southwest Steel, CoreBrace, DuraFuse, and SME Logistics) is an Equal Opportunity (EEO) Employer. All qualified applicants will receive consideration without regard to race, color, national origin, sex, sexual orientation, gender identity, religion, age, status as a protected veteran, status as an individual with disability, or any other protected group status or non-job-related characteristic as directed by law. Employment Authorization: Applicants must be legally authorized to work in the United States. Proof of eligibility will be required upon hire.

Function as an Apprentice Electrician, under a certified or licensed Electrician for Bergelectric Corp. assist electricians with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. Responsibilities Assist with the installation, repair, maintenance and testing of commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives. Use industry related hand tools and power tools, under supervision. Assist the Electrician with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Electrician with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Electrician to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Bergelectric Corp.'s safety policies and procedures. Qualifications Must be currently enrolled or working on enrollment in an approved Apprentice program. Knowledge of electrical theory, basic circuits, branch circuits, and specialty systems. Knowledge of magnetic induction, three-phase transformers, conductors and wiring methods. The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. Physical Demands Lift 50 lbs. from the ground and pull 50 lbs. of force. Perform ladder climbing, wire pulling and conduit pulling. Fully squat, stoop or kneel while wearing a 25 lbs. tool belt. Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Working Environment A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Benefits Bergelectric is proud to offer a comprehensive benefits package, including medical, dental, vision, and a 401k retirement plan with employer matching. EEO Statement The information contained in the job description is for compliance with the Americans with Disabilities Act (ADA) and is not an exhaustive list of duties performed by this position. Additional duties are performed by the individuals currently holding this position and additional duties may be assigned by the Supervisor or their designee. Bergelectric is a Federal government contractor and subject to the requirements of the Office of Federal Contract Compliance Programs (OFCCP). We have listed the affirmative action laws that we are governed by and their implementing regulations for your easy reference: Executive Order 11246 including Pay Transparency Nondiscrimination Provision (41 C.F.R. part 60) The Vietnam Era Veterans Readjustment Assistant Act of 1974, as amended (41 C.F.R. 60-300) Section 503 of the Rehabilitation Act of 1973, as amended (41 C.F.R. 60-741)

Function as an Apprentice Electrician, under a certified or licensed Electrician for Bergelectric Corp. assist electricians with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. This is considered to be a safety sensitive position. Responsibilities Assist with the installation, repair, maintenance and testing of commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives. Use industry related hand tools and power tools, under supervision. Assist the Electrician with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Electrician with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Electrician to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Bergelectric Corp.'s safety policies and procedures. Qualifications Must be currently enrolled or working on enrollment in an approved Apprentice program. Knowledge of electrical theory, basic circuits, branch circuits, and specialty systems. Knowledge of magnetic induction, three-phase transformers, conductors and wiring methods. The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. Physical Demands Lift 50 lbs. from the ground and pull 50 lbs. of force. Perform ladder climbing, wire pulling and conduit pulling. Fully squat, stoop or kneel while wearing a 25 lbs. tool belt. Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Working Environment A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Benefits Bergelectric is proud to offer a comprehensive benefits package, including medical, dental, vision, and a 401k retirement plan with employer matching. EEO Statement The information contained in the job description is for compliance with the Americans with Disabilities Act (ADA) and is not an exhaustive list of duties performed by this position. Additional duties are performed by the individuals currently holding this position and additional duties may be assigned by the Supervisor or their designee. Bergelectric is a Federal government contractor and subject to the requirements of the Office of Federal Contract Compliance Programs (OFCCP). We have listed the affirmative action laws that we are governed by and their implementing regulations for your easy reference: Executive Order 11246 including Pay Transparency Nondiscrimination Provision (41 C.F.R. part 60) The Vietnam Era Veterans Readjustment Assistant Act of 1974, as amended (41 C.F.R. 60-300) Section 503 of the Rehabilitation Act of 1973, as amended (41 C.F.R. 60-741)

Function as an Apprentice Electrician, under a certified or licensed Electrician for Bergelectric Corp. assist electricians with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. This is considered to be a safety sensitive position. Responsibilities Assist with the installation, repair, maintenance and testing of commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives. Use industry related hand tools and power tools, under supervision. Assist the Electrician with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Electrician with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Electrician to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Bergelectric Corp.'s safety policies and procedures. Qualifications Must be currently enrolled or working on enrollment in an approved Apprentice program. Knowledge of electrical theory, basic circuits, branch circuits, and specialty systems. Knowledge of magnetic induction, three-phase transformers, conductors and wiring methods. The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. Physical Demands Lift 50 lbs. from the ground and pull 50 lbs. of force. Perform ladder climbing, wire pulling and conduit pulling. Fully squat, stoop or kneel while wearing a 25 lbs. tool belt. Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Working Environment A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Benefits Bergelectric is proud to offer a comprehensive benefits package, including medical, dental, vision, and a 401k retirement plan with employer matching. EEO Statement The information contained in the job description is for compliance with the Americans with Disabilities Act (ADA) and is not an exhaustive list of duties performed by this position. Additional duties are performed by the individuals currently holding this position and additional duties may be assigned by the Supervisor or their designee. Bergelectric is a Federal government contractor and subject to the requirements of the Office of Federal Contract Compliance Programs (OFCCP). We have listed the affirmative action laws that we are governed by and their implementing regulations for your easy reference: Executive Order 11246 including Pay Transparency Nondiscrimination Provision (41 C.F.R. part 60) The Vietnam Era Veterans Readjustment Assistant Act of 1974, as amended (41 C.F.R. 60-300) Section 503 of the Rehabilitation Act of 1973, as amended (41 C.F.R. 60-741)

Function as an Apprentice Electrician, under a certified or licensed Electrician for Bergelectric Corp. assist electricians with installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state, and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential project locations. This is considered to be a safety sensitive position. Responsibilities Assist with the installation, repair, maintenance and testing of commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives. Use industry related hand tools and power tools, under supervision. Assist the Electrician with measuring, cutting, bending, threading and installing wire and electrical cable systems, conduit systems and other wire raceway systems. Assist the Electrician with wires and cables within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc. Work with an Electrician to splice and terminate wires at junction points. Clean, gather and transport materials to electricians on the construction site. Communicate effectively with Foremen and crew members. Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met. Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors. Adhere to all Bergelectric Corp.'s safety policies and procedures. Qualifications Must be currently enrolled or working on enrollment in an approved Apprentice program. Knowledge of electrical theory, basic circuits, branch circuits, and specialty systems. Knowledge of magnetic induction, three-phase transformers, conductors and wiring methods. The ability to read and understand electrical single line blueprints. Familiar with aspects of operation, maintenance and repair of electrical systems. Basic knowledge of tools and equipment and how to safely use them. Physical Demands Lift 50 lbs. from the ground and pull 50 lbs. of force. Perform ladder climbing, wire pulling and conduit pulling. Fully squat, stoop or kneel while wearing a 25 lbs. tool belt. Maintain a standing position for long periods of time while performing repetitive actions such as grasping or manipulating wires. Work off of ladders, man lifts or reach booms. Working Environment A variety of weather conditions including cold, snow, rain, heat, etc. High noise levels Benefits Bergelectric is proud to offer a comprehensive benefits package, including medical, dental, vision, and a 401k retirement plan with employer matching. EEO Statement The information contained in the job description is for compliance with the Americans with Disabilities Act (ADA) and is not an exhaustive list of duties performed by this position. Additional duties are performed by the individuals currently holding this position and additional duties may be assigned by the Supervisor or their designee. Bergelectric is a Federal government contractor and subject to the requirements of the Office of Federal Contract Compliance Programs (OFCCP). We have listed the affirmative action laws that we are governed by and their implementing regulations for your easy reference: Executive Order 11246 including Pay Transparency Nondiscrimination Provision (41 C.F.R. part 60) The Vietnam Era Veterans Readjustment Assistant Act of 1974, as amended (41 C.F.R. 60-300) Section 503 of the Rehabilitation Act of 1973, as amended (41 C.F.R. 60-741)

About DP Electric DP Electric is a 100% employee-owned, leading electrical contractor dedicated to delivering high-quality, innovative solutions across commercial and industrial projects. We strive to be the preferred contractor in the Southwest, not only for our clients, but also for individuals entering the workforce who seek a meaningful and lasting career. We've consistently been recognized as a Top Company to Work for in Arizona, known for our strong company culture, commitment to employee success, and people-first approach. * Award-Winning Employer: Our workplace culture, employee engagement, and benefits have earned us repeated accolades as a top employer. * Employee-Focused: We listen to employee feedback and act on it, resulting in better health benefits, improved time-off policies, and meaningful recognition programs. * Professional Growth: We invest in our people. From mentorship and career advancement to our in-house apprenticeship program, we help professionals at every stage grow in their careers. * Employee-Owned: As a 100% employee-owned company, every team member has a stake in the success of the organization and benefits directly from its growth. Position Overview We are seeking an Electrician Apprentice IV to join our team. The Electrician Apprentice IV continues developing advanced skills in the electrical trade, demonstrating a high level of competency in installations, troubleshooting, and conduit work. This role involves working independently or under limited supervision to execute complex electrical tasks in commercial and industrial settings. Key Responsibilities * Identifies and organizes all materials used in the electrical trade. * Plans and executes underground installations with precision, adhering to provided specifications. * Performs all aspects of rough-in electrical installations with minimal supervision, ensuring proper use of tools and equipment. * Demonstrates advanced skills in hand bending EMT, with proficiency in using mechanical and table benders for larger EMT and rigid conduit. * Installs panel interiors and pulls feeders within one-line systems with little to no supervision. * Assists in the setting and assembly of SES (Service Entrance Section) and transformers as part of electrical system installations. * Contributes to branch power system installations, including disconnects, homerun installations, terminations, branch circuit pulling, and fuse applications. * Provides comprehensive support to journeyman electricians by assisting with complex tasks as needed. * Interprets complex blueprints, symbols, layouts, and scales with precision, managing small scopes of work. * Maintains a clean and safe work environment while adhering to all safety protocols and regulations. * Adheres to company tool policies, demonstrating initiative in investing in and maintaining required trade tools. Qualifications Minimum: * High school diploma or GED. * Must hold a valid Apprentice Electrician License issued by the Texas Department of Licensing and Regulation (TDLR) and maintain it in active status throughout employment. * Three (3) years of prior experience in commercial or industrial electrical installation. * Enrollment in or willingness to join an accredited electrical apprenticeship program. * Valid driver's license and reliable transportation. Preferred: * Strong proficiency in conduit bending, including mechanical and hydraulic bending techniques. * Experience assisting in SES assembly, transformer setup, and complex system terminations. * Familiarity with NEC chapters 1-4 and demonstrated ability to navigate and apply electrical codes. * Strong problem-solving skills, initiative, and leadership capabilities. OR an equivalent combination of education, certification, and experience that results in the successful performance of the job. Additional education may substitute for required experience on a one-for-one year basis or vice versa. Knowledge, Skills, and Abilities * Knowledge of electrical trade materials, NEC regulations, and complex electrical installations. * Knowledge of advanced conduit bending techniques, underground systems, and troubleshooting methods. * Skill in executing rough-in installations, panel wiring, and transformer setup. * Skill in interpreting and managing work scopes from blueprints and technical drawings. * Ability to work independently or under the supervision of a journeyman electrician with efficiency and accuracy. * Ability to handle physically demanding tasks, including lifting, working at heights, and operating in confined spaces. * Ability to take ownership of projects, problem-solve, and lead small tasks effectively. Work Environment Medium work environment. Indoor and outdoor work with exposure to uncomfortable and hazardous physical, ergonomic, and/or emotional environment. Work requires lifting up to 50 pounds and wearing protective equipment; exposure to environmental conditions, weather, climbing, crawling, lying, and working under pressure. Compensation & Benefits * Competitive pay with opportunities for growth * Comprehensive health, dental, and vision insurance * 401(k) with company match * Employee Stock Ownership Plan (ESOP) - Become a company owner through our 100% employee-owned model * Paid time off and holidays * Ongoing training and development programs Equal Opportunity Employer DP Electric is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All employment decisions are made based on qualifications, merit, and business needs.

About DP Electric DP Electric is a 100% employee-owned, leading electrical contractor dedicated to delivering high-quality, innovative solutions across commercial and industrial projects. We strive to be the preferred contractor in the Southwest, not only for our clients, but also for individuals entering the workforce who seek a meaningful and lasting career. We've consistently been recognized as a Top Company to Work for in Arizona, known for our strong company culture, commitment to employee success, and people-first approach. * Award-Winning Employer: Our workplace culture, employee engagement, and benefits have earned us repeated accolades as a top employer. * Employee-Focused: We listen to employee feedback and act on it, resulting in better health benefits, improved time-off policies, and meaningful recognition programs. * Professional Growth: We invest in our people. From mentorship and career advancement to our in-house apprenticeship program, we help professionals at every stage grow in their careers. * Employee-Owned: As a 100% employee-owned company, every team member has a stake in the success of the organization and benefits directly from its growth. Position Overview We are seeking an Electrician Apprentice IV to join our team. The Electrician Apprentice IV continues developing advanced skills in the electrical trade, demonstrating a high level of competency in installations, troubleshooting, and conduit work. This role involves working independently or under limited supervision to execute complex electrical tasks in commercial and industrial settings. Key Responsibilities * Identifies and organizes all materials used in the electrical trade. * Plans and executes underground installations with precision, adhering to provided specifications. * Performs all aspects of rough-in electrical installations with minimal supervision, ensuring proper use of tools and equipment. * Demonstrates advanced skills in hand bending EMT, with proficiency in using mechanical and table benders for larger EMT and rigid conduit. * Installs panel interiors and pulls feeders within one-line systems with little to no supervision. * Assists in the setting and assembly of SES (Service Entrance Section) and transformers as part of electrical system installations. * Contributes to branch power system installations, including disconnects, homerun installations, terminations, branch circuit pulling, and fuse applications. * Provides comprehensive support to journeyman electricians by assisting with complex tasks as needed. * Interprets complex blueprints, symbols, layouts, and scales with precision, managing small scopes of work. * Maintains a clean and safe work environment while adhering to all safety protocols and regulations * Adheres to company tool policies, demonstrating initiative in investing in and maintaining required trade tools. Qualifications Minimum: * High school diploma or GED. * Three (3) years of prior experience in commercial or industrial electrical installation. * Enrollment in or willingness to join an accredited electrical apprenticeship program. * Valid driver's license and reliable transportation. Preferred: * Strong proficiency in conduit bending, including mechanical and hydraulic bending techniques. * Experience assisting in SES assembly, transformer setup, and complex system terminations. * Familiarity with NEC chapters 1-4 and demonstrated ability to navigate and apply electrical codes. * Strong problem-solving skills, initiative, and leadership capabilities. OR an equivalent combination of education, certification, and experience that results in the successful performance of the job. Additional education may substitute for required experience on a one-for-one year basis or vice versa. Knowledge, Skills, and Abilities * Knowledge of electrical trade materials, NEC regulations, and complex electrical installations. * Knowledge of advanced conduit bending techniques, underground systems, and troubleshooting methods. * Skill in executing rough-in installations, panel wiring, and transformer setup. * Skill in interpreting and managing work scopes from blueprints and technical drawings. * Ability to work independently or under the supervision of a journeyman electrician with efficiency and accuracy.Ability to handle physically demanding tasks, including lifting, working at heights, and operating in confined spaces. * Ability to take ownership of projects, problem-solve, and lead small tasks effectively. Work Environment Medium work environment. Indoor and outdoor work with exposure to uncomfortable and hazardous physical, ergonomic, and/or emotional environment. Work requires lifting up to 50 pounds and wearing protective equipment; exposure to environmental conditions, weather, climbing, crawling, lying, and working under pressure. Compensation & Benefits * Competitive pay with opportunities for growth * Comprehensive health, dental, and vision insurance * 401(k) with company match * Employee Stock Ownership Plan (ESOP) - Become a company owner through our 100% employee-owned model * Paid time off and holidays * Ongoing training and development programs Equal Opportunity Employer DP Electric is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All employment decisions are made based on qualifications, merit, and business needs.

About DP Electric DP Electric is a 100% employee-owned, leading electrical contractor dedicated to delivering high-quality, innovative solutions across commercial and industrial projects. We strive to be the preferred contractor in the Southwest, not only for our clients, but also for individuals entering the workforce who seek a meaningful and lasting career. We've consistently been recognized as a Top Company to Work for in Arizona, known for our strong company culture, commitment to employee success, and people-first approach. * Award-Winning Employer: Our workplace culture, employee engagement, and benefits have earned us repeated accolades as a top employer. * Employee-Focused: We listen to employee feedback and act on it, resulting in better health benefits, improved time-off policies, and meaningful recognition programs. * Professional Growth: We invest in our people. From mentorship and career advancement to our in-house apprenticeship program, we help professionals at every stage grow in their careers. * Employee-Owned: As a 100% employee-owned company, every team member has a stake in the success of the organization and benefits directly from its growth. Position Overview We are seeking an Electrician Apprentice III to join our team. The Electrician Apprentice III advances their expertise in electrical systems, building upon previous apprenticeship experience. This role requires an increasing level of competency in installations, troubleshooting, and conduit work while working closely with experienced electricians in commercial and industrial settings. Key Responsibilities * Identifies and organizes all materials used in the electrical trade. * Executes underground installations, adhering to provided specifications. * Performs rough-in electrical installations with minimal supervision, ensuring proper use of tools and equipment. * Demonstrates advanced skills in hand bending EMT, with some proficiency in using mechanical and table benders for larger conduit. * Assists in panel interior installation and pulling feeders within one-line systems. * Contributes to branch power system installations, including disconnects, homerun installations, terminations, branch circuit pulling, and fuse applications. * Supports journeyman electricians as needed, gaining hands-on experience in complex tasks. * Interprets blueprints, schematics, and layout drawings to ensure accurate installations. * Maintains a clean and safe work environment while adhering to all safety protocols and regulations. * Adheres to company tool policies, demonstrating responsibility for tool investment and upkeep. Qualifications Minimum: * High school diploma or GED. * Two (2) years of prior experience in commercial electrical installation. * Enrollment in or willingness to join an accredited electrical apprenticeship program. * Valid driver's license and reliable transportation. Preferred: * Familiarity with larger conduit bending techniques and mechanical/hydraulic benders. * Strong problem-solving skills and ability to take initiative. * Experience assisting in panel interior installation and system terminations. OR an equivalent combination of education, certification, and experience that results in the successful performance of the job. Additional education may substitute for required experience on a one-for-one year basis or vice versa. Knowledge, Skills, and Abilities * Knowledge of electrical components, materials, and intermediate electrical codes. * Knowledge of conduit bending techniques, underground electrical systems, and troubleshooting methods. * Skill in using electrical hand tools, power tools, and mechanical conduit bending equipment. * Ability to execute rough-in installations and panel wiring with minimal supervision. * Ability to read and interpret electrical schematics, blueprints, and layout drawings. * Ability to lift and transport heavy materials, work in confined spaces, and perform physically demanding tasks. * Ability to communicate effectively with team members and follow complex instructions. Work Environment Medium work environment. Indoor and outdoor work with exposure to uncomfortable and hazardous physical, ergonomic, and/or emotional environment. Work requires lifting up to 50 pounds and wearing protective equipment; exposure to environmental conditions, weather, climbing, crawling, lying, and working under pressure. Compensation & Benefits * Competitive pay with opportunities for growth * Comprehensive health, dental, and vision insurance * 401(k) with company match * Employee Stock Ownership Plan (ESOP) - Become a company owner through our 100% employee-owned model * Paid time off and holidays * Ongoing training and development programs Equal Opportunity Employer DP Electric is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All employment decisions are made based on qualifications, merit, and business needs.

About Us Southern Electric Corporation a Quanta Services, Inc. (NYSE:PWR) company, is an electrical utility contractor specializing in the construction of high-voltage transmission lines, underground, and distribution lines as well as providing emergency restoration services. A proven leader in the industry since 1985, SEC has earned a reputation of providing superior work with a strong focus on customer satisfaction and safety. We currently manage over 100 crews and nearly 2,000 pieces of late model equipment. Customers include investor-owned utilities, electric cooperatives, and municipalities throughout our work footprint. Our team is our family. We are 100% committed to the safety of our team members and providing industry leading training. We believe we can be the last job you ever want to apply for. Call us family! About this Role This is a job for anyone looking to come to work with SEC doing Underground residental work. Driving Commercial vehicles. Trouble shooting UG pad mount transformers. All other things involved with UG work. What You'll Do Pullin wire laying pipe terminating elbows splice box trouble shooting transformers NEEDS to have a Commerical Drivers License What You'll Bring Hand tools Any other tools you have pertaining to Underground What You'll Get Medical Dental Vision 401K Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

About Us Southern Electric Corporation a Quanta Services, Inc. (NYSE:PWR) company, is an electrical utility contractor specializing in the construction of high-voltage transmission lines, underground, and distribution lines as well as providing emergency restoration services. A proven leader in the industry since 1985, SEC has earned a reputation of providing superior work with a strong focus on customer satisfaction and safety. We currently manage over 100 crews and nearly 2,000 pieces of late model equipment. Customers include investor-owned utilities, electric cooperatives, and municipalities throughout our work footprint. Our team is our family. We are 100% committed to the safety of our team members and providing industry leading training. We believe we can be the last job you ever want to apply for. Call us family! About this Role A Journeyman Lineman at Southern Electric Corporation classification will have received their training in an approved forty-two (42) month apprenticeship program or a certified testing program or must have five (5) years of continuous substation/line construction/maintenance experience. Journeyman Linemen shall have a working knowledge of all aspects of substation/line work and have the capability and expertise to work independently if required. What You'll Do * Installs and repairs structures, conductors or equipment used in electrical power or distribution systems. * Installs and maintains line hardware and erect wooden and/or steel poles and light or heavy-duty transmission towers. * Splices cables together for overhead transmission lines, customer service lines, or street light lines. * String wire conductors and cable between erected poles and adjust slack, using winch, hoist, or other means. * Utilize aerial lift equipment and/or climb poles and removes and installs hardware, wires, and other equipment. * Opens/closes switches to isolate or energize line sections. * Test lines and equipment for potential and, installs grounding devices to de-energize circuits and equipment to perform repairs, adjustments or to remove electrical hazards. * Capable of calculating set up locations for stringing operations. * Secure one shots, hold tags, R-switches, hot line holds etc. on lines working near or over. * Required to hang travelers from poles or towers. * Ensure that guards and covers are in place for lines, highway, and other obstructions on ROW. * Ensure that all grounds are in place on stringing equip. grounding blocks etc. * Supervise conductor stringing operation. * Capable of operating all const. equipment if needed. * Capable of using plumb bob, pulling guy wires, and ensuring that poles are plumb before dead ending cond. * Interpret charts and calculate sag for conductors, using owners required method. * Capable of working from hanging ladders, walk boards, or baskets on booms for clipping, dead ending cond., etc. * Capable of hanging and operating carts for spacing bundle conductors. * Required to set guard poles, string lead line, string cond., sag, clip, and dead-end cond. * Watch over, direct, and train Apprentice linemen working under or with them. * Direct and ensure that Underground utilities are located. * Replaces and straightens poles and attaches cross-arms, insulators, and auxiliary equipment to wood poles preparatory to erection. * Cleans, trims, and splices corresponding conductors by splicing together or by joining ends with compression connections. * Tests conductors to identify corresponding conductors and to prevent incorrect connections, according to electrical diagrams and specifications. * Install watt-hour meters and connects service drops between power line and consumer. * Covers conductors with insulating material. * Uses rubber gloves, hot sticks, or the live line "bare hand" method to work on and/or repair energized lines to avoid interruption of service. What You'll Bring * May be required to relocate as work requirements demand. * May be required to hold a valid class "B" commercial driver's license. * Need to have certification for light cranes, boom trucks, etc. * May be required to read and interpret blueprints. * Drives and operates conveyance machinery equipped with tools and materials to and from job site. * Adheres to all Company Safety and Health Policies * May work in storm restoration operations to rebuild and/or repair damaged power systems. * May attend training classes or seminars to gather knowledge of new processes, safety regulations and/or refresher training. * Works with limited supervision. What You'll Get * Medical * Dental * Vision * 401K Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law.We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Job Title: Electrician SupervisorDepartment: Electrical IntegrationClassification: FLSA-Non-ExemptJob Family: ProductionDate: 01.20.26Reports to: Production ManagerTravel: 0%Employment Type: HourlyExpected Work Hours: 40+ Essential Functions Summary: The Electrician Supervisor provides leadership and oversight for all electrical assembly, installation, and troubleshooting activities within industrial and commercial production environments. This role ensures electrical work is completed safely, accurately, and in compliance with NEC standards. The Electrician Supervisor directs Electrical Journeyman Leads, Electricians, and Apprentices; manages workflow; and collaborates with cross‑functional teams to support production goals and maintain high-quality standards. Accountabilities: Supervise daily electrical operations, ensuring proper installation, modification, and testing of electrical systems, equipment, and controls. Assign, schedule, and prioritize electrical tasks to meet production deadlines and project requirements. Read and interpret schematic drawings, blueprints, wiring diagrams, work orders, and specifications; ensure teams follow accurate installation and assembly procedures. Oversee and support installation of electrical raceways, including conduit, wireways, and cable trays. Inspect, test, and troubleshoot house utilities, control wiring, and electrical equipment using NEC standards, diagrams, and testing devices. Provide hands-on technical guidance and performance oversight for apprentices, helpers, and general laborers involved in electrical tasks. Ensure compliance with NEC, state licensure requirements, and company quality standards. Conduct regular quality checks on work performed, ensuring accurate wiring, proper equipment assembly, and adherence to electrical diagrams. Train, mentor, and assess the skill development of team members; contribute to performance evaluations and disciplinary actions when needed. Maintain documentation, approve timecards, and manage accurate labor reporting within the HRIS system. Support development and updating standard operating procedures (SOPs) for electrical work. Collaborate with Production, Engineering, and Safety teams to coordinate workflow and resolve technical issues. Promote and enforce all safety protocols; lead by example in maintaining a clean and organized work environment. Perform other duties as assigned by the Production Manager. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. Attributes Safety First: Demonstrates unwavering commitment to electrical safety and regulatory compliance. Have Humanity: Treats team members with professionalism and fosters a supportive learning environment. Be Transparent: Communicates clearly regarding expectations, schedules, and project challenges. Drive Innovation: Seeks opportunities to improve electrical processes, tools, and team efficiency. Be Resilient: Adapts to changing priorities, schedules, and production demands. Always Reliable: Provides consistent leadership, dependable results, and high-quality workmanship. Grit: Tackles complex electrical challenges with persistence and pride. Required Knowledge/Experience: Successful completion of a National Electrical Code (NEC) certified journeyman apprenticeship or equivalent program. Journeyman Electrical License in the state of Idaho (or reciprocity-eligible state) preferred. 16,000 verifiable hours of experience as an Electrician in an industrial or construction environment. 2+ years of supervisory or lead experience. Extensive knowledge of high-voltage equipment, electrical systems, and industrial control wiring. Strong understanding of materials, tools, and methods used in control panel assembly and electrical installations. Ability to interpret electrical schematics, control diagrams, layout drawings, and wiring blueprints with accuracy. Proficiency with electrical testing equipment including voltmeters, MEGGER testers, and light meters. Strong communication skills and ability to interact professionally at all organizational levels. Knowledge of OSHA safety regulations related to electrical work. Physical ability to stand, stoop, kneel, and crouch for 8-10 hours and lift up to 50 lbs or push/pull up to 100 lbs. Ability to work indoors and outdoors in all weather conditions. Must pass a background check and drug screening. Basic understanding of Microsoft Outlook, Word, and Excel Work Environment and Physical Demands FLSA executive role paid on a hourly basis; project demands may require workweeks over fifty (50) hours, including weekends or holidays. Work performed primarily in a heavy manufacturing environment with exposure to indoor and outdoor conditions. Mobility: Ability to stand, kneel, stoop, or crouch for extended periods. Manual Dexterity: Frequent use of hands to handle wiring, tools, electrical components, and testing devices. Lifting Requirements: Capable of lifting up to 50 lbs and pushing/pulling up to 100 lbs in accordance with OSHA standards. Visual/Auditory Requirements: Must be able to see wiring colors, read schematics, and hear instructions or alarms. Must successfully complete background and drug screening. Other Duties Please note this is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. By signing below, I acknowledge that I have read and understand the job description. I understand that the duties and responsibilities listed are not exhaustive and may be modified at any time, with or without notice.Manager Signature / Print NameDateEmployee Signature / Print NameDate Powered by JazzHR K5ZRTjkyus

Job Title: Electrician Supervisor Department: Electrical Integration Classification: FLSA-Non-Exempt Job Family: Production Date: 01.20.26 Reports to: Production Manager Travel: 0% Employment Type: Hourly Expected Work Hours: 40+ Essential Functions Summary: The Electrician Supervisor provides leadership and oversight for all electrical assembly, installation, and troubleshooting activities within industrial and commercial production environments. This role ensures electrical work is completed safely, accurately, and in compliance with NEC standards. The Electrician Supervisor directs Electrical Journeyman Leads, Electricians, and Apprentices; manages workflow; and collaborates with cross‑functional teams to support production goals and maintain high-quality standards. Accountabilities: Supervise daily electrical operations, ensuring proper installation, modification, and testing of electrical systems, equipment, and controls. Assign, schedule, and prioritize electrical tasks to meet production deadlines and project requirements. Read and interpret schematic drawings, blueprints, wiring diagrams, work orders, and specifications; ensure teams follow accurate installation and assembly procedures. Oversee and support installation of electrical raceways, including conduit, wireways, and cable trays. Inspect, test, and troubleshoot house utilities, control wiring, and electrical equipment using NEC standards, diagrams, and testing devices. Provide hands-on technical guidance and performance oversight for apprentices, helpers, and general laborers involved in electrical tasks. Ensure compliance with NEC, state licensure requirements, and company quality standards. Conduct regular quality checks on work performed, ensuring accurate wiring, proper equipment assembly, and adherence to electrical diagrams. Train, mentor, and assess the skill development of team members; contribute to performance evaluations and disciplinary actions when needed. Maintain documentation, approve timecards, and manage accurate labor reporting within the HRIS system. Support development and updating standard operating procedures (SOPs) for electrical work. Collaborate with Production, Engineering, and Safety teams to coordinate workflow and resolve technical issues. Promote and enforce all safety protocols; lead by example in maintaining a clean and organized work environment. Perform other duties as assigned by the Production Manager. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. Attributes Safety First: Demonstrates unwavering commitment to electrical safety and regulatory compliance. Have Humanity: Treats team members with professionalism and fosters a supportive learning environment. Be Transparent: Communicates clearly regarding expectations, schedules, and project challenges. Drive Innovation: Seeks opportunities to improve electrical processes, tools, and team efficiency. Be Resilient: Adapts to changing priorities, schedules, and production demands. Always Reliable: Provides consistent leadership, dependable results, and high-quality workmanship. Grit: Tackles complex electrical challenges with persistence and pride. Required Knowledge/Experience: Successful completion of a National Electrical Code (NEC) certified journeyman apprenticeship or equivalent program. Journeyman Electrical License in the state of Idaho (or reciprocity-eligible state) preferred. 16,000 verifiable hours of experience as an Electrician in an industrial or construction environment. 2+ years of supervisory or lead experience. Extensive knowledge of high-voltage equipment, electrical systems, and industrial control wiring. Strong understanding of materials, tools, and methods used in control panel assembly and electrical installations. Ability to interpret electrical schematics, control diagrams, layout drawings, and wiring blueprints with accuracy. Proficiency with electrical testing equipment including voltmeters, MEGGER testers, and light meters. Strong communication skills and ability to interact professionally at all organizational levels. Knowledge of OSHA safety regulations related to electrical work. Physical ability to stand, stoop, kneel, and crouch for 8-10 hours and lift up to 50 lbs or push/pull up to 100 lbs. Ability to work indoors and outdoors in all weather conditions. Must pass a background check and drug screening. Basic understanding of Microsoft Outlook, Word, and Excel Work Environment and Physical Demands FLSA executive role paid on a hourly basis; project demands may require workweeks over fifty (50) hours, including weekends or holidays. Work performed primarily in a heavy manufacturing environment with exposure to indoor and outdoor conditions. Mobility: Ability to stand, kneel, stoop, or crouch for extended periods. Manual Dexterity: Frequent use of hands to handle wiring, tools, electrical components, and testing devices. Lifting Requirements: Capable of lifting up to 50 lbs and pushing/pulling up to 100 lbs in accordance with OSHA standards. Visual/Auditory Requirements: Must be able to see wiring colors, read schematics, and hear instructions or alarms. Must successfully complete background and drug screening. Other Duties Please note this is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. By signing below, I acknowledge that I have read and understand the job description. I understand that the duties and responsibilities listed are not exhaustive and may be modified at any time, with or without notice. Manager Signature / Print Name Date Employee Signature / Print Name Date

Job Description Experienced Residential Service Electrician - Raleigh, NC "Your customer doesn't care how much you know until they know how much you care." Michael and Son Services, Inc., founded in 1976 and based in Alexandria, VA, provides top-quality electrical, plumbing, HVAC, and restoration services across Maryland, Virginia, and the Carolinas. We're known for our focus on customer service, integrity, and professionalism. We're looking for Experienced Residential Service Electricians to join our Raleigh team and help homeowners solve electrical problems safely and efficiently. If you take pride in your work, enjoy helping customers, and want to work for a company that values honesty, professionalism, and career growth, this could be the right role for you. What You'll Do Diagnose and repair residential electrical issues safely, accurately, and efficiently Install electrical components and systems according to code and company standards Explain repair or upgrade options clearly to help customers make informed decisions Recommend solutions that meet customer needs while maintaining trust and integrity Complete all work thoroughly, document service using company-provided tools, and maintain professionalism in every home Follow safety guidelines and company processes to ensure a high-quality customer experience What Success Looks Like In the first 6-12 months, success in this role means: Consistently satisfied customers and positive feedback High-quality work with minimal callbacks or rework Meeting service and performance goals through honest, customer-focused recommendations Working independently while following company processes and standards Representing Michael and Son Services professionally and responsibly in every interaction What We're Looking For Must-Have Qualifications 3+ years of experience in residential electrical service (or equivalent practical experience) Strong troubleshooting skills and ability to work independently Excellent customer service and communication skills Ability to explain service options and help customers make informed decisions Valid driver's license (clean driving record preferred) High school diploma or equivalent Nice-to-Have Qualifications Electrical license or certification (journeyman, master, or equivalent) Experience meeting service or performance goals in a residential setting Familiarity with tablets, digital dispatching, or paperless job documentation Interest in career growth, mentorship, or leadership opportunities What We Offer Up to $100,000 earning potential through quality service and recommendations Year-round job stability with no slow-season layoffs Fully stocked service truck with gas card and insurance coverage Tablet for paperless dispatching and documentation Dispatch directly from home with guidance and support from our team Flexible schedule with rotating on-call hours Comprehensive benefits package including medical, dental, vision, 401(k) match, PTO, uniforms with laundering service, life insurance, employee discounts, and more Ongoing training and career development opportunities to help you grow At Michael and Son Services, we value technicians who combine strong technical skills with integrity, professionalism, and a customer-first mindset. If you're ready to bring your expertise to a company that supports your success, rewards hard work, and prioritizes integrity, apply today and join the Michael and Son family! #MOF25 This job is contingent upon satisfactory completion of a background check and drug test.

Experienced Residential Service Electrician - Raleigh, NC "Your customer doesn't care how much you know until they know how much you care." Michael and Son Services, Inc., founded in 1976 and based in Alexandria, VA, provides top-quality electrical, plumbing, HVAC, and restoration services across Maryland, Virginia, and the Carolinas. We're known for our focus on customer service, integrity, and professionalism. We're looking for Experienced Residential Service Electricians to join our Raleigh team and help homeowners solve electrical problems safely and efficiently. If you take pride in your work, enjoy helping customers, and want to work for a company that values honesty, professionalism, and career growth, this could be the right role for you. What You'll Do Diagnose and repair residential electrical issues safely, accurately, and efficiently Install electrical components and systems according to code and company standards Explain repair or upgrade options clearly to help customers make informed decisions Recommend solutions that meet customer needs while maintaining trust and integrity Complete all work thoroughly, document service using company-provided tools, and maintain professionalism in every home Follow safety guidelines and company processes to ensure a high-quality customer experience What Success Looks Like In the first 6-12 months, success in this role means: Consistently satisfied customers and positive feedback High-quality work with minimal callbacks or rework Meeting service and performance goals through honest, customer-focused recommendations Working independently while following company processes and standards Representing Michael and Son Services professionally and responsibly in every interaction What We're Looking For Must-Have Qualifications 3+ years of experience in residential electrical service (or equivalent practical experience) Strong troubleshooting skills and ability to work independently Excellent customer service and communication skills Ability to explain service options and help customers make informed decisions Valid driver's license (clean driving record preferred) High school diploma or equivalent Nice-to-Have Qualifications Electrical license or certification (journeyman, master, or equivalent) Experience meeting service or performance goals in a residential setting Familiarity with tablets, digital dispatching, or paperless job documentation Interest in career growth, mentorship, or leadership opportunities What We Offer Up to $100,000 earning potential through quality service and recommendations Year-round job stability with no slow-season layoffs Fully stocked service truck with gas card and insurance coverage Tablet for paperless dispatching and documentation Dispatch directly from home with guidance and support from our team Flexible schedule with rotating on-call hours Comprehensive benefits package including medical, dental, vision, 401(k) match, PTO, uniforms with laundering service, life insurance, employee discounts, and more Ongoing training and career development opportunities to help you grow At Michael and Son Services, we value technicians who combine strong technical skills with integrity, professionalism, and a customer-first mindset. If you're ready to bring your expertise to a company that supports your success, rewards hard work, and prioritizes integrity, apply today and join the Michael and Son family! #MOF25 This job is contingent upon satisfactory completion of a background check and drug test.

High school diploma as well as the successful completion of a four-year apprenticeship is required to become a lineman. Possess excellent problem-solving, troubleshooting and organizational, and analytical skills. Must have a valid CDL license Responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment. This includes work from power plants to the meters of customers homes. Additionally, a lineman digs trenches for the installation of underground lines, install meters, climb poles to repair overhead lines and inspect power lines for possible repair or replacement.