Plumber/Pipefitter jobs at Zachry Construction - 30 jobs

An Industrial Pipefitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipefitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i. e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft.

An Industrial Pipefitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipefitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft. Qualification Highlights Must have 4+ years working as an Industrial Pipefitter. Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. Must have good leadership and communication skills. Must have experience on an industrial construction project. Position Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Prepare, fabricate, install, and fit pipe to specifications. Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications. Perform test to ensure the quality of the pipe and the piping systems. Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Reports to Position This position does not have any direct reports; however the position will work closely with and oversee on occasion helper and labor positions. The position will hold a positional and expertise authority over the helper and laborer positions. JOB REQUIREMENTS Required Qualifications Demonstrated industrial construction/maintenance history experience. Ability to read prints and construction drawings. Ability to read and interpret technical manuals and manufacturers manuals and instructions. Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant. Must have 4+ years' experience with the pipe fitting processes. Good problem-solving abilities. Good aptitude and manual dexterity. Good reading comprehension. Ability to work with others - team player. Ability to work independently - minimal supervision. Good communication skills with co-workers and supervisors. Commitment to Zachry values and safety rules and regulations. Preferred Qualifications Zachry ROF'd employee. Former Zachry Employee. NCCER Certification as an Industrial Pipe Fitter Formal/technical education Required Tools 1 - Metal Toolbox with Lock 2 - Torpedo Magnetic Level 1 - 25' Tape Measure 1 - 5 Gallon Plastic Bucket 2 - 12" x 24" Framing Square 1 - String Level 1 - 8" Crescent Wrench 1 - 14" Pipe Wrench 1 - 24" Pipe Wrench 1 - Pipefitter's Blue Book 1 - 420 Channel Locks 1 - Torch Lighter (Striker) 1 - Chalk Line 1 - Set of Allen Wrenches 1 - Line Up Bar 2 - Combination Open/Box End Wrenches (7/8", 15/16", 1 1/16", 1 1/8", 1 1/4") 1 - Screwdriver (Flat) 1 - Set of Tip Cleaners 1 - Pair of Leather Gloves 1 - 24" Level 1 - 16' Tape Measure 1 - Pair of Cutting Goggles 1 - Center Finder 1 - 4" Wraparound 1 - 12" Crescent Wrench 1 - 18" Pipe Wrench 1 - Center Punch 1 - Wire Cutters 1 - Plumb Bob 1 - Set Blinding Wedges - Small 1 - Hacksaw 1 - 3lb to 4lb Ball Peen Hammer 1 - Phillips Screwdriver 1 - Combination Set - Tri- Square, Protractor, and Center Finder 1 - 3/8 Ratchet Drive with 3/8" to 1" set 1 - Construction Calculator 1 - Rain Suit 1 - Rubber boots Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working out side in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. #LI-AT1

**A** **bout Austin Industrial** Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ . **Pipefitter** This person will be able to lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems. Other duties may be assigned. **Specific Duties and Responsibilities:** + Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders. + Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or welding equipment. + Measure and mark pipes for cutting and threading. + Plan pipe system layout, installation, or repair according to specifications. + Select pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications. + Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools. + Install automatic controls used to regulate pipe systems. + Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches. + Remove and replace worn components. + Inspect work sites for obstructions and to ensure that holes will not cause structural weakness. + Operate motorized pumps to remove water from flooded manholes, basements, or facility floors. + Dip nonferrous piping materials in a mixture of molten tin and lead to obtain a coating that prevents erosion or galvanic and electrolytic action. + Other duties as assigned. + Applicants must be legally authorized to work for ANY employer in the United States. Austin Industries is unable to sponsor or take over sponsorship of an employment visa for this position **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. **Qualifications Required for this Position:** **Education:** - no minimum education requirements. **Experience:** - 4 years of Journeyman-level experience. **Certifications/ Licenses:** NCCER, a Valid Driver's License, and a TWIC Card. **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (************************************************************************************** and Spanish (**************************************************************************************** . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** **Qualifications** **Licenses & Certifications** **Required** + NCCER-Ind Pipe PV + Valid Driver's License **Experience** **Required** + 4 years: 4 years of Journeyman-level experience. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

This posting is for future project needs. We are building a qualified talent pool of Pipefitters to support upcoming projects. Candidates will be contacted as positions become available. Thank you for your interest in The Shaw Group! We encourage you to follow The Shaw Group on social media platforms; LinkedIn and Facebook to stay connected LinkedIn- Click here to follow us on LinkedIn Facebook: Click here to follow us on Facebook Summary The Shaw Group is looking for an experienced Pipefitter to join our team in a role that primarily operates outdoors. The ideal candidate will have a strong understanding of pipe systems, excellent problem-solving skills, and the ability to work effectively in varying weather conditions. Responsibilities Installation and Maintenance: Construct, assemble, install, and maintain piping systems according to specifications and codes. Blueprint Interpretation: Read and interpret blueprints, drawings, and specifications to determine the layout of piping systems. Material Preparation: Select appropriate materials, such as pipes, fittings, and fixtures, and ensure their proper preparation and assembly. Welding and Cutting: Perform welding, brazing, soldering, and cutting tasks to connect pipes and related components. Inspection and Testing: Conduct tests and inspections to ensure systems meet safety and quality standards. Repair and Troubleshooting: Identify and repair malfunctions in pipelines, such as leaks or blockages, and troubleshoot issues as they arise. Adherence to Safety Standards: Adhere strictly to safety guidelines and procedures, especially when working in outdoor environments and adverse weather conditions. Education Proven experience as a Pipefitter, with a focus on outdoor work. Proficiency in reading and interpreting blueprints and technical drawings. Knowledge of various piping materials, tools, and techniques. Strong troubleshooting and problem-solving abilities. Welding and cutting skills. Physical stamina to work outdoors in varying weather conditions. Commitment to safety protocols and guidelines. Excellent communication and teamwork skills. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

An Industrial Pipe Fitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft. Qualification Highlights Must have 4+ years working as an Industrial Pipe Fitter or Pipe Fitter Helper. Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. Must have good leadership and communication skills. Must have experience on an industrial construction project. Required Qualifications Demonstrated industrial construction/maintenance history experience. Ability to read prints and construction drawings. Ability to read and interpret technical manuals and manufacturers manuals and instructions. Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant. Must have 4+ years' experience with the pipe fitting processes. Good problem-solving abilities. Good aptitude and manual dexterity. Good reading comprehension. Ability to work with others - team player. Ability to work independently - minimal supervision. Good communication skills with co-workers and supervisors. Commitment to Zachry values and safety rules and regulations. Preferred Qualifications Zachry ROF'd employee. Former Zachry Employee. NCCER Certification as an Industrial Pipe Fitter Formal/technical education Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, pull objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. Position Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Prepare, fabricate, install, and fit pipe to specifications. Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications. Perform test to ensure the quality of the pipe and the piping systems. Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Reports to Position This position does not have any direct reports; however, the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions.

**About Austin Industrial** Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of 4,000 employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost-efficiency. **Pipefitter** This person will be able to lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems. Other duties may be assigned. **Specific Duties and Responsibilities:** + Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders. + Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or welding equipment. + Measure and mark pipes for cutting and threading. + Plan pipe system layout, installation, or repair according to specifications. + Select pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications. + Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools. + Install automatic controls used to regulate pipe systems. + Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches. + Remove and replace worn components. + Inspect work sites for obstructions and to ensure that holes will not cause structural weakness. + Operate motorized pumps to remove water from flooded manholes, basements, or facility floors. + Dip nonferrous piping materials in a mixture of molten tin and lead to obtain a coating that prevents erosion or galvanic and electrolytic action. + Other duties as assigned. + Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. **Qualifications Required for this Position:** **Education:** - no minimum education requirements. **Certifications/ Licenses:** NCCER, a Valid Driver's License or State ID. **Experience:** - 4 years of Journeyman-level experience. **Benefits & Compensation** We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to ********************************************************** **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (************************************************************************************** and Spanish (**************************************************************************************** . **About Austin Industrial** Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

**A** **bout Austin Industrial** Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ . **Pipefitter** This person will be able to lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems. Other duties may be assigned. **Specific Duties and Responsibilities:** + Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders. + Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or welding equipment. + Measure and mark pipes for cutting and threading. + Plan pipe system layout, installation, or repair according to specifications. + Select pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications. + Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools. + Install automatic controls used to regulate pipe systems. + Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches. + Remove and replace worn components. + Inspect work sites for obstructions and to ensure that holes will not cause structural weakness. + Operate motorized pumps to remove water from flooded manholes, basements, or facility floors. + Dip nonferrous piping materials in a mixture of molten tin and lead to obtain a coating that prevents erosion or galvanic and electrolytic action. + Other duties as assigned. + Applicants must be legally authorized to work for ANY employer in the United States. Austin Industries is unable to sponsor or take over sponsorship of an employment visa for this position **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. **Qualifications Required for this Position:** **Education:** - no minimum education requirements. **Experience:** - 4 years of Journeyman-level experience. **Certifications/ Licenses:** NCCER, a Valid Driver's License, and a TWIC Card. **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (************************************************************************************** and Spanish (**************************************************************************************** . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** **Qualifications** **Licenses & Certifications** **Required** + NCCER-Ind Pipe PV + TWIC Card + Valid Driver's License **Experience** **Required** + 4 years: 4 years of Journeyman-level experience. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Capable of leading a team of pipefitters and welders. Strong supervision skills, attention to detail, review of drawings, appropriate delegation of time and production. Ensure materials are appropriate, proper use of time. Responsibilities: Capable of showing helpers, fitters, welders' appropriate procedures if needed. Strong supervision skills, building team report. Typically reports to Pipe General Foreman and/or Supervisor. May be required to pass employer performance tests or standard tests to meet certification standards of governmental agencies or professional and technical associations. Performing only those jobs on which they have been trained and/or authorized. Education and Experience: May require a high school diploma or its equivalent. May require previous years of experience in the field or in a related field. Has knowledge of commonly used concepts, practices and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Physical Requirements: NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%) Standing C Walking C Sitting F Pushing F Pulling F Climbing O Balancing O Bending F Stooping F Kneeling F Crouching F Crawling F Reaching C Handling C Fingering C Feeling C Vision C Hearing C Lifting (lbs.) Carrying (lbs.) 0-10 C 0-10 C 10-25 F 10-25 F 25-50 O 25-50 O We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

About Austin Industrial Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of 4,000 employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost efficiency. Austin Industrial is currently seeking a Pipefitter Foreman to join our staff located at Pasadena, TX. This person must be experienced in crew supervision, scheduling, equipment oversight, and ensuring safety compliance. Specific Duties and Responsibilities: * Supervise crews installing, maintaining, and repairing high-pressure piping systems, ensuring strict adherence to safety (OSHA) and quality standards * Manage daily work schedules, performing field take-offs, coordinating material resources, inspecting welds/systems, and overseeing hydrotesting. * Train personnel, manage costs, and report to superintendents. * Manage a crew of pipefitters, assigning tasks, training personnel, and resolving technical issues. * Assigns workers to specific duties. * Inspects completed processing systems to determine conformance to specifications. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Qualifications: * Knowledge of the plant and area to provide expectations to crews working on assets. * Good communication, organizational and supervisory skills are essential. Requirements: * High school diploma or equivalent * Experience: 5+ years of previous supervisory experience as a NCCER Pipefitter Foreman in pipefitting and in industrial construction. * NCCER Piping General Foreman Certification required * Valid Driver's License required * Valid TWIC card required * Regular, reliable attendance * Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. * Meet physical demands as listed above * Applicants must be legally authorized to work for ANY employer in the United States. Austin is unable to sponsor or take over sponsorship of an employment visa for this position. Benefits & Compensation Austin Industrial is an Equal Opportunity Employer. See the "Know Your Rights" poster available in English and Spanish. About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (i.e., payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners become the property of the Company. Accessibility Note If you are a job seeker with a disability and require reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at **************.

**About Austin Industrial** Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of 4,000 employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost efficiency. **Austin Industrial** is currently seeking a **Pipefitter Foreman** to join our staff located at **Pasadena, TX** . This person must be experienced in crew supervision, scheduling, equipment oversight, and ensuring safety compliance. **Specific Duties and Responsibilities:** + Supervise crews installing, maintaining, and repairing high-pressure piping systems, ensuring strict adherence to safety (OSHA) and quality standards + Manage daily work schedules, performing field take-offs, coordinating material resources, inspecting welds/systems, and overseeing hydrotesting. + Train personnel, manage costs, and report to superintendents. + Manage a crew of pipefitters, assigning tasks, training personnel, and resolving technical issues. + Assigns workers to specific duties. + Inspects completed processing systems to determine conformance to specifications. **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. **Qualifications:** + Knowledge of the plant and area to provide expectations to crews working on assets. + Good communication, organizational and supervisory skills are essential. **Requirements:** + High school diploma or equivalent + Experience: 5+ years of previous supervisory experience as a NCCER Pipefitter Foreman in pipefitting and in industrial construction. + NCCER Piping General Foreman Certification required + Valid Driver's License required + Valid TWIC card required + Regular, reliable attendance + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Meet physical demands as listed above + Applicants must be legally authorized to work for ANY employer in the United States. Austin is unable to sponsor or take over sponsorship of an employment visa for this position. **Benefits & Compensation** **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (************************************************************************************** and Spanish (**************************************************************************************** . **About Austin Industrial** Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (i.e., payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners become the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team at **************.** **Qualifications** **Experience** **Required** + 5 years: 5+ years of Industrial and Supervisory experience preferred. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Take your next step with Saulsbury Industries! Pipefitter Journey Modular Type: Full Time / NO PER DIEM A modular pipefitter (or industrial pipefitter) job involves laying out, fabricating, assembling, installing, and maintaining pipe systems, often in industrial settings such as chemical plants or refineries. Key responsibilities include reading technical drawings, using a variety of tools, and performing leak tests. Under direction, the pipefitter performs work involved in the installation, maintenance, and repair of process facilities and systems, high pressure steam pipes and fittings, pumps, boilers and furnaces, steam heating auxiliary equipment and steam operated equipment; works with various machine and hand tools common to the trade; may prepare or work from sketches, plans, and specifications in accord with accepted trade practices; may be called on to do routine welding; takes the lead over and gives suitable assignments to those assigned as helpers; does related work as required. Lay out, fabricate, assemble, install, and maintain piping, piping systems, and equipment for steam, hot water, cooling, lubricating, and industrial processing systems. Apply knowledge of system operation, building plans, and work drawings in performing tasks. Usually work with large pipes that are frequently secured by means of flanges (rim or collar) and/or welding. Responsibilities/Competencies Read Blueprints and Drawings: Interpret complex mechanical and structural drawings, isometric drawings, and specifications (including P&IDs and ISOs) to determine project requirements and the sequence of installation. Fabricate and Assemble: Select the specified type and size of pipe (carbon steel, stainless steel, copper, PVC, etc.) and related materials. Cut, thread, bend, and assemble pipes and fittings using various methods such as welding, soldering, brazing, fusing, or cementing. Install Systems: Mount pipe hangers and brackets on walls and ceilings, and secure pipes to structures using clamps, brackets, and supports. Install components like valves, couplings, and related equipment (pumps, heat exchangers, etc.). Test and Maintain: Test the installed piping systems for leaks by increasing pressure (hydrostatic or pressure tests) and observing gauges to ensure integrity and safety. Perform maintenance and repair work on existing systems. Safety and Work Environment: Follow strict health and safety guidelines and maintain a clean and safe work environment. This often involves working at heights, in confined spaces, and lifting heavy materials (up to 50 lbs). Uses basic knowledge of regulations and requirements. Determines methods and materials needed to accomplish assigned tasks. Prepares and/or works from sketches, plans, specifications, and roughing-in sheets in accord with approved trade practices. Interprets graphic symbols on piping drawings. Lays out, assembles, installs, and maintains pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems, applying knowledge of system operation, and following blueprints. Installs and repairs piping systems using flanged, screwed, bell and spigot, compression, and soldered joints Perform lockout and tag procedures to secure and deactivate equipment, and checks local point to ensure proper lockout procedures are used. Inspects work site to determine presence of obstructions and to ascertain that holes cut for pipe will not cause structural weakness. Bends pipe, using pipe bending tools and pipe bending machine. Cuts pipe, using saws, pipe cutter, hammer and chisel, cutting torch, and pipe cutting machine. Threads pipe by hand or by power driven equipment. Dismantles equipment or devices to gain access to and remove defective parts or components. Enters safe vessels, towers, and columns for installation and maintenance of trays and cleaning. Perform miscellaneous tasks that require manually moving materials, tools, and equipment and using hand tools and power tools. Performs work area clean-up and safety-related duties. Completes paperwork documenting repair and maintenance activities. Gives suitable assignments to helpers. Works in association with all crafts (electrician, welder, carpenter, or painter) when conditions, schedule, or workload warrants or as directed by management. Secures pipes to structure with brackets, clamps, and hangers, using hand tools and power tools. Requires working in operating facilities and observing and abiding by additional safety policies and procedures. Other duties as assigned Requirements Four (4) years of experience in work involving a variety of layout, installation, and maintenance tasks Proficiency in using various hand and power tools, including cutting torches, threading machines, grinders, and beveling machines. Ability to operate equipment like forklifts and man lifts is also common. Strong understanding of pipe fitting processes, materials, welding symbols, safety procedures (OSHA 10-hour certification is often preferred), and an ability to read technical manuals. Good communication skills, problem-solving abilities, attention to detail, and the capacity to work both independently and as part of a team. Safety Requirements On a continual basis, promotes an awareness of environmental, health and safety policies to ensure a safe working environment and ensures compliance with all accompany policies Ability to pass drug test as mandated by the Saulsbury Industries and Department of Transportation antidrug program Must attend and successfully complete Saulsbury Industries safety training education Attends safety meetings and specialty training as directed by management Attends various training classes as may be assigned by management Perform related duties and responsibilities as required Ability to take needed safety precautions in performing the work Physical Requirements Manual and finger dexterity Eye-hand coordination Depth perception Ability to see things clearly that are beyond arm's reach (far visual acuity) Ability to see small detail Ability to lift and carry up to 50 pounds Ability to climb 30-foot ladders without resting Ability to maintain balance on catwalks and narrow work spaces Ability to stand for long periods of time Ability to reach above head while sitting or standing Ability to reach below knees while standing Ability to stoop or kneel Ability to work 50 or more hours each week Cognitive Requirements Reading comprehension skill to understand work orders, written instructions, technical manuals, and safety procedures Mathematical skill to perform basic calculations Oral communication skills for routine and technical information exchange with co-workers, supervisors, or other personnel Skill in using hand signals Knowledge of basic safety practices Ability to plan and coordinate construction, maintenance, and repair activities Ability to evaluate work conditions and quality, and to make decisions regarding course of actions (decision making) Ability to communicate with others and to assimilate and understand information, in a manner consistent with the essential job functions Temperament Attributes Interpersonal skills to cooperate with co-workers, supervisors, and members of other crafts Ability to work under time pressure Ability to make sound decisions in a manner consistent with the essential job functions Ability to understand, remember, and carry out oral and written directions Ability to take needed safety precautions in performing the work Responds to request to work overtime when conditions warrant and directed by management Work Environment Employees in this position must be able to perform under the following conditions: Awkward or confining workspaces High places Out-of-door environment Noisy Environment Dirty Environment Air contamination (dust, fumes, etc.) Physical Requirements Prolonged periods sitting / standing at a desk and working on a computer. Ability to stand for extended periods of time. Ability to walk the property and laydown yards. Ability to carry up to 50 pounds. Please submit your interest by supplying your name, contact number, and experience to: ***************************** or text the information to ************** or **************. Saulsbury is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status.

Take your next step with Saulsbury Industries! Pipefitter Journey Modular Type: Full Time / NO PER DIEM A modular pipefitter (or industrial pipefitter) job involves laying out, fabricating, assembling, installing, and maintaining pipe systems, often in industrial settings such as chemical plants or refineries. Key responsibilities include reading technical drawings, using a variety of tools, and performing leak tests. Under direction, the pipefitter performs work involved in the installation, maintenance, and repair of process facilities and systems, high pressure steam pipes and fittings, pumps, boilers and furnaces, steam heating auxiliary equipment and steam operated equipment; works with various machine and hand tools common to the trade; may prepare or work from sketches, plans, and specifications in accord with accepted trade practices; may be called on to do routine welding; takes the lead over and gives suitable assignments to those assigned as helpers; does related work as required. Lay out, fabricate, assemble, install, and maintain piping, piping systems, and equipment for steam, hot water, cooling, lubricating, and industrial processing systems. Apply knowledge of system operation, building plans, and work drawings in performing tasks. Usually work with large pipes that are frequently secured by means of flanges (rim or collar) and/or welding. Responsibilities/Competencies Read Blueprints and Drawings: Interpret complex mechanical and structural drawings, isometric drawings, and specifications (including P&IDs and ISOs) to determine project requirements and the sequence of installation. Fabricate and Assemble: Select the specified type and size of pipe (carbon steel, stainless steel, copper, PVC, etc.) and related materials. Cut, thread, bend, and assemble pipes and fittings using various methods such as welding, soldering, brazing, fusing, or cementing. Install Systems: Mount pipe hangers and brackets on walls and ceilings, and secure pipes to structures using clamps, brackets, and supports. Install components like valves, couplings, and related equipment (pumps, heat exchangers, etc.). Test and Maintain: Test the installed piping systems for leaks by increasing pressure (hydrostatic or pressure tests) and observing gauges to ensure integrity and safety. Perform maintenance and repair work on existing systems. Safety and Work Environment: Follow strict health and safety guidelines and maintain a clean and safe work environment. This often involves working at heights, in confined spaces, and lifting heavy materials (up to 50 lbs). Uses basic knowledge of regulations and requirements. Determines methods and materials needed to accomplish assigned tasks. Prepares and/or works from sketches, plans, specifications, and roughing-in sheets in accord with approved trade practices. Interprets graphic symbols on piping drawings. Lays out, assembles, installs, and maintains pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems, applying knowledge of system operation, and following blueprints. Installs and repairs piping systems using flanged, screwed, bell and spigot, compression, and soldered joints Perform lockout and tag procedures to secure and deactivate equipment, and checks local point to ensure proper lockout procedures are used. Inspects work site to determine presence of obstructions and to ascertain that holes cut for pipe will not cause structural weakness. Bends pipe, using pipe bending tools and pipe bending machine. Cuts pipe, using saws, pipe cutter, hammer and chisel, cutting torch, and pipe cutting machine. Threads pipe by hand or by power driven equipment. Dismantles equipment or devices to gain access to and remove defective parts or components. Enters safe vessels, towers, and columns for installation and maintenance of trays and cleaning. Perform miscellaneous tasks that require manually moving materials, tools, and equipment and using hand tools and power tools. Performs work area clean-up and safety-related duties. Completes paperwork documenting repair and maintenance activities. Gives suitable assignments to helpers. Works in association with all crafts (electrician, welder, carpenter, or painter) when conditions, schedule, or workload warrants or as directed by management. Secures pipes to structure with brackets, clamps, and hangers, using hand tools and power tools. Requires working in operating facilities and observing and abiding by additional safety policies and procedures. Other duties as assigned Requirements Four (4) years of experience in work involving a variety of layout, installation, and maintenance tasks Proficiency in using various hand and power tools, including cutting torches, threading machines, grinders, and beveling machines. Ability to operate equipment like forklifts and man lifts is also common. Strong understanding of pipe fitting processes, materials, welding symbols, safety procedures (OSHA 10-hour certification is often preferred), and an ability to read technical manuals. Good communication skills, problem-solving abilities, attention to detail, and the capacity to work both independently and as part of a team. Safety Requirements On a continual basis, promotes an awareness of environmental, health and safety policies to ensure a safe working environment and ensures compliance with all accompany policies Ability to pass drug test as mandated by the Saulsbury Industries and Department of Transportation antidrug program Must attend and successfully complete Saulsbury Industries safety training education Attends safety meetings and specialty training as directed by management Attends various training classes as may be assigned by management Perform related duties and responsibilities as required Ability to take needed safety precautions in performing the work Physical Requirements Manual and finger dexterity Eye-hand coordination Depth perception Ability to see things clearly that are beyond arm's reach (far visual acuity) Ability to see small detail Ability to lift and carry up to 50 pounds Ability to climb 30-foot ladders without resting Ability to maintain balance on catwalks and narrow work spaces Ability to stand for long periods of time Ability to reach above head while sitting or standing Ability to reach below knees while standing Ability to stoop or kneel Ability to work 50 or more hours each week Cognitive Requirements Reading comprehension skill to understand work orders, written instructions, technical manuals, and safety procedures Mathematical skill to perform basic calculations Oral communication skills for routine and technical information exchange with co-workers, supervisors, or other personnel Skill in using hand signals Knowledge of basic safety practices Ability to plan and coordinate construction, maintenance, and repair activities Ability to evaluate work conditions and quality, and to make decisions regarding course of actions (decision making) Ability to communicate with others and to assimilate and understand information, in a manner consistent with the essential job functions Temperament Attributes Interpersonal skills to cooperate with co-workers, supervisors, and members of other crafts Ability to work under time pressure Ability to make sound decisions in a manner consistent with the essential job functions Ability to understand, remember, and carry out oral and written directions Ability to take needed safety precautions in performing the work Responds to request to work overtime when conditions warrant and directed by management Work Environment Employees in this position must be able to perform under the following conditions: Awkward or confining workspaces High places Out-of-door environment Noisy Environment Dirty Environment Air contamination (dust, fumes, etc.) Physical Requirements Prolonged periods sitting / standing at a desk and working on a computer. Ability to stand for extended periods of time. Ability to walk the property and laydown yards. Ability to carry up to 50 pounds. Please submit your interest by supplying your name, contact number, and experience to: ***************************** or text the information to ************** or **************. Saulsbury is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status.

* THIS IS MAINTENANCE*NO PER DIEM* An Industrial Pipe Fitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft. Qualification Highlights * Must have 4+ years working as an Industrial Pipe Fitter or Pipe Fitter Helper. * Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. * Must have good leadership and communication skills. * Must be have experience on an industrial construction project. Position Responsibilities * Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. * Identify all tools required for tasks. * Identify safety risks and the precautions required to eliminate those risks. * Prepare, fabricate, install, and fit pipe to specifications. * Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications. * Perform test to ensure the quality of the pipe and the piping systems. * Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Reports to Position * This position does not have any direct reports; however the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions. JOB REQUIREMENTS Required Qualifications * Demonstrated industrial construction/maintenance history experience. * Ability to read prints and construction drawings. * Ability to read and interpret technical manuals and manufacturers manuals and instructions. * Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant. * Must have 4+ years experience with the pipe fitting processes. * Good problem-solving abilities. * Good aptitude and manual dexterity. * Good reading comprehension. * Ability to work with others - team player. * Ability to work independently - minimal supervision. * Good communication skills with co-workers and supervisors. * Commitment to Zachry values and safety rules and regulations. Preferred Qualifications * Zachry ROF'ed employee. * Former Zachry Employee. * NCCER Certification as an Industrial Pipe Fitter * Formal/technical education Required Tools * 1 - Metal Tool Box with Lock * 2 - Torpedo Magnetic Level * 1 - 25' Tape Measure * 1 - 5 Gallon Plastic Bucket * 2 - 12" x 24" Framing Square * 1 - String Level * 1 - 8" Crescent Wrench * 1 - 14" Pipe Wrench * 1 - 24" Pipe Wrench * 1 - Pipefitter's Blue Book * 1 - 420 Channel Locks * 1 - Torch Lighter (Striker) * 1 - Chalk Line * 1 - Set of Allen Wrenches * 1 - Line Up Bar * 2 - Combination Open/Box End Wrenches (7/8", 15/16", 1 1/16", 1 1/8", 1 1/4") * 1 - Screwdriver (Flat) * 1 - Set of Tip Cleaners * 1 - Pair of Leather Gloves * 1 - 24" Level * 1 - 16' Tape Measure * 1 - Pair of Cutting Goggles * 1 - Center Finder * 1 - 4" Wraparound * 1 - 12" Crescent Wrench * 1 - 18" Pipe Wrench * 1 - Center Punch * 1 - Wire Cutters * 1 - Plumb Bob * 1 - Set Blinding Wedges - Small * 1 - Hacksaw * 1 - 3lb to 4lb Ball Peen Hammer * 1 - Phillips Screwdriver * 1 - Combination Set - Tri- Square, Protractor, and Center Finder * 1 - 3/8 Ratchet Drive with 3/8" to 1" set * 1 - Construction Calculator * 1 - Rain Suit * 1 - Rubber boots Physical Requirements * Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. * Will talk and hear to communicate. * Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. * Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. * May be required to lift, carry and move up to 50lbs. * Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. * Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. * Must be capable of working out side in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. * Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer

This posting is for future project needs. We are building a qualified talent pool of Iron Worker Helpers to support upcoming projects. Candidates will be contacted as positions become available. Thank you for your interest in The Shaw Group! We encourage you to follow The Shaw Group on social media platforms; LinkedIn and Facebook to stay connected LinkedIn- Click here to follow us on LinkedIn Facebook: Click here to follow us on Facebook Summary: The Ironworker Helper prepares the site for daily work and supports journeyman and apprentice ironworkers with tasks required for safe and efficient completion of projects. Responsibilities include housekeeping, material handling, and assisting with steel placement and installation. A minimum of 6 months of field experience in construction or a related craft is preferred. Must have the ability to read and interpret basic instructions and documentation. The level of responsibility may vary depending on months of experience and assigned job step. Responsibilities: Prepares work areas by cleaning, organizing, and staging materials for daily activities. Loads, transport, and unloads steel, tools, and equipment to designated locations. Assists with lifting, positioning, and securing steel beams, columns, reinforcing bars, and other materials during installation. Holds and stabilizes materials while journeyman ironworkers connect, weld, or bolt components. Follows hand signals or verbal instructions from ironworkers or signalers to properly guide placement of materials. Use hand tools, power tools, and rigging equipment under supervision. Observes and follows all site safety requirements, ensuring work areas remain clean and free of hazards. May assist with rigging activities, securing loads, and attaching lifting devices to steel members. Supports alignment and leveling of steel structures as directed. Performs minor maintenance or cleaning on tools and equipment. Rely on instructions and pre-established guidelines to perform daily functions. Works under close to moderate supervision, typically reporting to a foreman or supervisor. Gains knowledge of commonly used practices, concepts, and procedures within the trade. Education and Experience: High school diploma or equivalent preferred. Minimum of 6 months documented construction or field experience (ironwork experience preferred). Ability to follow written and verbal instructions. Must be physically able to lift up to 50 lbs, climb, and work at heights. Willingness to learn and progress within the ironworker trade. Physical Requirements: NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%) Standing C Walking C Sitting F Pushing F Pulling F Climbing O Balancing O Bending F Stooping F Kneeling F Crouching F Crawling F Reaching C Handling C Fingering C Feeling C Vision C Hearing C Lifting (lbs) Carrying (lbs) 0-10 C 0-10 C 10-25 F 10-25 F 25-50 O 25-50 O We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

This posting is for future project needs. We are building a qualified talent pool of Iron Workers to support upcoming projects. Candidates will be contacted as positions become available. Thank you for your interest in The Shaw Group! We encourage you to follow The Shaw Group on social media platforms; LinkedIn and Facebook to stay connected LinkedIn- Click here to follow us on LinkedIn Facebook: Click here to follow us on Facebook Summary To provide support for new and existing work within the business line. Personnel will be providing bolt-up assembly for structural components in a fabrication facility, individual may be required to work outside. Responsibilities Reads and interprets instructions and documentation and plans work activities. Will be required to visually inspect and receive material in all-weather condition. Visualize objects in three dimensions from plans and drawings. Compare and see differences in the size, shape, and form of lines, figures, and objects. Selects equipment, figures layout assembly, and installation. Selects equipment, lays out, positions, aligns, and fits components together for installation. Works under immediate supervision. Physical Requirements NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%) Standing C Walking C Sitting F Pushing F Pulling F Climbing O Balancing O Bending F Stooping F Kneeling F Crouching F Crawling F Reaching C Handling C Fingering C Feeling C Vision C Hearing C Lifting (lbs.) Carrying (lbs.) 0-10 C 0-10 C 10-25 F 10-25 F 25-50 O 25-50 O Education Education and/or experience are equal to a 1-year certificate from college or technical school. 3-6 months related experience and/or training or equivalent combination of education and experience. Must possess mathematical skills, reasoning ability, and ability to handle the physical demands of the job. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

An Industrial Pipe Fitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft. Qualification Highlights * Must have 4+ years working as an Industrial Pipe Fitter or Pipe Fitter Helper. * Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. * Must have good leadership and communication skills. * Must have experience on an industrial construction project.

ZACHRY is currently seeking experienced NCCER Industrial Insulator for MAINTENANCE work at Exxon Mobil, in Beaumont TX. NO PER DIEM IS OFFERED. · Insulation work, mechanical, apply insulating materials to pipes and ductwork or other mechanical systems to help control and maintain temperature · Will measure and cut sections of insulation to the proper length · Will fasten the insulation with adhesive, staples, tape, or wire bands · May wrap a cover of aluminum, plastic, or canvas over the insulation and cement or band the cover in place · May screw on metal around the insulated pipes to protect the insulation from the weather or physical abuse · Other duties as assigned Essential Skills, Knowledge, and Abilities: · Proficient mechanical skills · Must have all journeyman insulating tools · Knowledge of machines and tools, including their designs, uses, repair, and maintenance · Able to communicate items of concern found during inspections and walk downs · Knowledge of industrial machinery and equipment · Organization and time management · Must have good aptitude and manual dexterity · Good reading comprehension · Ability to work with others - team player · Good communication skills with co-workers and supervisors · Commitment to Zachry values and safety rules and regulations · Must have experience using industrial hand tools and power tools · Must have reliable transportation · Knowledge of safety practices to operated equipment JOB REQUIREMENTS Valued but not required skills, knowledge, and abilities: · Former Zachry employee · Minimum 4-5 years industrial Maintenance · Training in vocational schools or related on the job experience. Physical demands and work environment: Physical demands: Employee will be required to adhere to large amounts of standing, walking, bending, squatting, and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, pull objects, materials, controls, and tools. Give full attention to what other people are saying, taking time to understand directions. May be required to lift, carry, and move objects safely. Will occasionally work at heights, climb ladders and stairways, and work off platforms. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves, and steel-toe boots. · Work environment: Will work in all weather conditions ranging from warm/hot - cool/cold. Occasional rain. Will work at different elevations. Noise levels will be moderate to high. Job site will contain light to heavy equipment vehicles, small to large equipment, materials, communication equipment and tools. JOB REQUIREMENTS ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer CERTIFICATIONS AND/OR LICENSES REQUIRED * NCCER - Industrial Insulator CERTIFICATIONS AND/OR LICENSES REQUIRED * NCCER - Industrial Insulator OTHER POSITION OR SITE REQUIREMENTS MUST HAVE TWIC Job Specific Requirements DOES THIS POSITION REQUIRE A COMPUTER? * No BACKGROUND CHECK * Yes REQUIREMENTS MEDICAL * Drug Screen Pre-Employment Physical Pulmonary Function Test Hair Follicle Scott AV 3000 HT Scott AV 2000 FF 3M 6000 Half Face

***THIS IS MAINTENANCE***NO PER DIEM*** Apply, remove, and repair insulation on industrial equipment, pipes, ductwork, or other mechanical systems such as heat exchangers, hot and cold pipes, storage tanks and vessels, to help control noise and maintain temperatures. RESPONSIBILITIES - Reads and interprets blue prints, instructions, and other documentation or plan work activities. - Determines the amounts and selects required insulation material (in sheet, tubular, or roll form), such as fiberglass, foam rubber, Styrofoam, cork, or urethane, based on materials ability to retain heat, location, surface, shape, and equipment use. - Moves materials and equipment to work locations and sets up work site. - Cover, seal, or finish insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement or asphalt mastic. - Fit insulation around obstructions, and shape insulating materials and protective coverings as required. - Install sheet metal around insulated pipes with screws in order to protect the insulation from weather conditions or physical damage - Measure and cut insulation for covering surfaces, using tape measures, handsaws, knives, and scissors. - Prepare surfaces for insulation application by brushing or spreading on adhesives, cement, or asphalt, or by attaching metal pins to surfaces. - Covers or seals insulation with preformed plastic covers, canvas strips, sealant, or tape to secure insulation to structure, according to type of insulation used and structure covered, using staple gun, trowel, paintbrush, or caulking gun. - Follows all hazardous waste handling guidelines. - May remove or seal off old asbestos insulation, following safety procedures. - Completes records, maintains tools and equipment, and performs various clean-up and housekeeping activities. - Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment. Performs other duties as required. JOB REQUIREMENTS - Work within precise limits or standards of accuracy. - Apply shop mathematics to solve problems. - Plan work and select proper tools. - Compare and see differences in the size, shape and form of lines, figures and objects. - Visualize objects in three dimensions from plans and drawings. - Make decisions based on measurable criteria. - Work at heights without fear. CERTIFICATIONS AND/OR LICENSES REQUIRED * NCCER - Industrial Insulator ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.

Apply, remove, and repair insulation on industrial equipment, pipes, ductwork, or other mechanical systems such as heat exchangers, hot and cold pipes, storage tanks and vessels, to help control noise and maintain temperatures. RESPONSIBILITIES - Reads and interprets blue prints, instructions, and other documentation or plan work activities. - Determines the amounts and selects required insulation material (in sheet, tubular, or roll form), such as fiberglass, foam rubber, Styrofoam, cork, or urethane, based on materials ability to retain heat, location, surface, shape, and equipment use. - Moves materials and equipment to work locations and sets up work site. - Cover, seal, or finish insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement or asphalt mastic. - Fit insulation around obstructions, and shape insulating materials and protective coverings as required. - Install sheet metal around insulated pipes with screws in order to protect the insulation from weather conditions or physical damage - Measure and cut insulation for covering surfaces, using tape measures, handsaws, knives, and scissors. - Prepare surfaces for insulation application by brushing or spreading on adhesives, cement, or asphalt, or by attaching metal pins to surfaces. - Covers or seals insulation with preformed plastic covers, canvas strips, sealant, or tape to secure insulation to structure, according to type of insulation used and structure covered, using staple gun, trowel, paintbrush, or caulking gun. - Follows all hazardous waste handling guidelines. - May remove or seal off old asbestos insulation, following safety procedures. - Completes records, maintains tools and equipment, and performs various clean-up and housekeeping activities. - Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment. Performs other duties as required. JOB REQUIREMENTS - Work within precise limits or standards of accuracy. - Apply shop mathematics to solve problems. - Plan work and select proper tools. - Compare and see differences in the size, shape and form of lines, figures and objects. - Visualize objects in three dimensions from plans and drawings. - Make decisions based on measurable criteria. - Work at heights without fear. CERTIFICATIONS AND/OR LICENSES REQUIRED * NCCER - Industrial Insulator #LI-SM1