Quality Inspector jobs at Zachry Construction - 417 jobs

QC Inspector I&E will assist management in establishing project requirements for selecting the proper procedures and techniques for project quality control in the I&E segment of the project. Performs pre-installation inspections as required including materials, wire size, routing, tubing size, fittings, raceway, supports, and ties storage to ensure the compliance to the project specifications, governing codes, and/or manufactures recommendations. Documents inspection activities on the correct forms, checklist, or media approved the by the projects ITP or SOP. Responsibilities Responsibilities: • Executes the specific inspections on materials, equipment and construction/installation activities on site. • Issues the relevant Quality Records and, when necessary, writes and sends to QC Supervisor non-conformances reports. • Checks cable laying and cable identification. • Performs punch-listing operations. • Checks power transformers, switchboard, accumulator battery, sockets outlet, lighting system. • Performs visual inspections, dimensional test, checks rating and material for connection. • Witness tests of continuity, insulation resistance. • Checks installation of instruments. • Performs tests functional instruments. • Checks fiber optic cable. • Performs test communication functionalities. • Verify special processes and the relevant workers' qualifications. • Witness the tests, controls and inspections carried out. • Check conformity with the Quality Control Plan, obtain the relevant documentation, verifies procedures and equipment to be used in tests, controls and inspections, manage documents certifying tests, controls and inspections. Qualifications Required Qualifications - Essential Skills, Knowledge, and Abilities: • Previous construction experience within the oil and gas industry • Previous exposure to high voltage electrical installation including switchgear and electric drives • Exposure to Hazardous Area installations • Commitment to Zachry values and safety rules and regulations • Instrument calibrations including ultrasonic flow meter, level transmitters, temperature transmitters, pressure transmitters etc. • A working knowledge of BS/IEC/ISO/API/ATEX/EEMUA codes and standards relating to electrical and instrumentation work • Working knowledge of construction standards, codes of practice and regulations/legislation relating to electrical and instrumentation work • Must have good aptitude and manual dexterity • Proficient in the use of Microsoft Office Package. Familiar with other computer packages (e.g. MS Project, Outlook, Bluebeam, etc.) • Ability to perform well under pressure • Ability to work with others - team player • Good communication skills with co-workers and supervisors Work Environment: Will work in all weather conditions ranging from warm/hot - cool/cold. Occasional rain. Will work at different elevations. May be required to work in close, confined spaces for a long period of time. Noise levels will be moderate to high. ZACHRY is dedicated to providing a Safe and Drug-Free work environment and is an Equal Opportunity Employer. #LI-KS1

Kitchell is currently looking to add a Quality Inspector with Healthcare and Higher Education building experience to join our Texas Division in Austin, Texas. Quality Inspector is responsible for providing primary quality efforts on projects as assigned which include inspection and documentation, technical research, and standards interpretation. This position will have activities in both our Austin and Houston offices. Travel will be 50% daily travel with less than 10% of overnight travel. Duties & Responsibilities General * Provide primary Quality efforts on projects as assigned which include inspection and documentation, technical research, and standards interpretation. * Spend approximately 20% of the time in the office, and the remaining 80% of the time out in the field. * Participate in department and project meetings, publishes meeting notes, and performs topical follow-ups. * Participate in assigned classes and training events. Construction Phase * Conduct Quality Inspections as assigned. * Prepare project inspection reports. * Assist project teams with detail and submittal reviews. * Assist in preparation of and attend Pre-Assembly Meetings. * Observe and document assembly testing when assigned. * Participate in project document management. * Participate in Quality Department document peer review exercises. * Update project schedules and communicate status updates. Pursuit, Preconstruction and Constructability Phase * Assist senior staff with site walks, assembly reviews, and documentation reviews as required. Forensic Phase * Assist senior staff with site walks, assembly reviews and documentation reviews as required. Education and Experience Required * High School Diploma or GED. * A minimum of 10 years of employment in construction with a minimum of 5 years of employment in construction quality. Equivalent Education * Associate's degree (any) and 8 years of construction experience. * Trade school completion or Certification (any) and 8 years of construction experience with a minimum of 5 years in construction quality. * Bachelor's degree (any) and 6 years of construction experience with a minimum of 5 years in quality. Travel Requirement * Employees may travel up to 50% of the time including multi-day and out-of-state travel. * Valid Motor Vehicle License, clean record with no restrictions or suspensions. * Ability to drive a motorized vehicle. * Have and maintain the proper identification required for domestic (US) air travel.

Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Quality Coordinator is an essential role to ensure the success of Rosendin's Quality & Commissioning programs and initiatives. The Quality Coordinator will work directly with and assist the Director of Quality and Quality Department with program roll outs, initiatives, and reporting. The Quality Coordinator will also be assisting the QA/Cx Managers and project teams with project setup, management, and closeout of applications for implementing, executing , and tracking the QA/QC and Commissioning processes. WHAT YOU'LL DO: Assist in the setup and closeout of QA/Cx applications used for executing Rosendin's Quality & Commissioning programs. Monitoring and auditing of Rosendin's Quality & Commissioning Program to ensure regions, areas and/or projects are conforming and meeting program and customer expectations. Monitoring and auditing of QA/Cx application data to ensure they are meeting program expectations and requirements. QA/CX application technical assistance and support for the Quality, QA/Cx Regional Managers, and Field teams. Review and analyze report and data trends for initiating continual improvements and procedure and process revisions. Assist with management of the Quality & Commissioning Intranet page for content and access. Assist with creating workflows and training content for our quality and commissioning processes and the applications used. Provide feedback and input for continual QA/Cx program and general quality improvements. Assist with manual, handbook, playbook, procedure, and form updates. Assist and participate with creating, building, and delivering training content. Coordinate monthly team meetings. The duties and responsibilities are intended to describe the general nature and scope of work being performed by this position. This is not all encompassing and other duties may be assigned based on the position's role within the company. WHAT YOU'LL NEED TO BE SUCCESSFUL: Proficient in using Microsoft Office (Outlook, Word, Excel, etc.) Proficient in the use of BIM 360 and PlanGrid preferred. Ability to prioritize and manage multiple tasks, changing priorities as necessary Ability to work under time pressure and adapt to changing requirements with a positive attitude. Effective oral and written communication skills as required for the position. Ability to be self-motivated, proactive and an effective team player. Ability to interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others WHAT YOU BRING TO US: High school diploma or equivalent Associate or bachelor's degree construction management or related field Electrical industry and quality experience preferred. Can be a combination of education, training, and relevant experience. TRAVEL: Limited WORKING CONDITIONS: General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning Noise level is usually low to medium; it can be loud on the jobsite. We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Occasional lifting of up to 30 lbs. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits ESOP - Employee Stock Ownership 401 K Annual bonus program based upon performance, profitability, and achievement 17 PTO days per year plus 10 paid holidays Medical, Dental, Vision Insurance Term Life, AD&D Insurance, and Voluntary Life Insurance Disability Income Protection Insurance Pre-tax Flexible Spending Plans (Health and Dependent Care) Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business…and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Kitchell is currently looking to add a Quality Inspector with Healthcare and Higher Education building experience to join our Texas Division in Houston, Texas. Quality Inspector is responsible for providing primary quality efforts on projects as assigned which include inspection and documentation, technical research, and standards interpretation. This position will have activities in both our Austin and Houston offices. Travel will be 50% daily travel with less than 10% of overnight travel. Duties & Responsibilities General * Provide primary Quality efforts on projects as assigned which include inspection and documentation, technical research, and standards interpretation. * Spend approximately 20% of the time in the office, and the remaining 80% of the time out in the field. * Participate in department and project meetings, publishes meeting notes, and performs topical follow-ups. * Participate in assigned classes and training events. Construction Phase * Conduct Quality Inspections as assigned. * Prepare project inspection reports. * Assist project teams with detail and submittal reviews. * Assist in preparation of and attend Pre-Assembly Meetings. * Observe and document assembly testing when assigned. * Participate in project document management. * Participate in Quality Department document peer review exercises. * Update project schedules and communicate status updates. Pursuit, Preconstruction and Constructability Phase * Assist senior staff with site walks, assembly reviews, and documentation reviews as required. Forensic Phase * Assist senior staff with site walks, assembly reviews and documentation reviews as required. Education and Experience Required * High School Diploma or GED. * A minimum of 10 years of employment in construction with a minimum of 5 years of employment in construction quality. Equivalent Education * Associate's degree (any) and 8 years of construction experience. * Trade school completion or Certification (any) and 8 years of construction experience with a minimum of 5 years in construction quality. * Bachelor's degree (any) and 6 years of construction experience with a minimum of 5 years in quality. Travel Requirement * Employees may travel up to 50% of the time including multi-day and out-of-state travel. * Valid Motor Vehicle License, clean record with no restrictions or suspensions. * Ability to drive a motorized vehicle. * Have and maintain the proper identification required for domestic (US) air travel.

Since 1953, Red Valve has set the standard for solving the world's toughest flow control challenges through unmatched elastomer design and manufacturing experience. Red Valve is dedicated to exceeding customer expectations with proven, creative, high-value solutions. Red Valve has a passion for innovation and creativity, with a wealth of patents and best approaches developed for customers' needs. The people of Red Valve embrace this passion every day, providing reliable solutions to customers' most demanding challenges, wherever and whenever they are needed most. Our Core Values Driven to Win Right - Can Do! - High Power - Low Ego & Thrive Together Red Valve was acquired by DeZURIK on January 1, 2021. Our organization offers the following: * Sign On Bonus * Health and Wellness Incentives * Employee Engagement Activities A Red Valve Quality Inspector must be a highly motivated, creative, self-starter who will perform a variety of quality control tests/inspections on products, materials, components, and parts, at various stages of the production process to ensure compliance with quality and reliability standards. The ideal candidate will demonstrate the desire and ability to drive change, identify business needs, areas of improvement and objectives through research and data-backed decision making that will empower them to make recommendations on appropriate business initiatives. Based on the needs of the business, this is a rotational position throughout the facility, covering a variety of quality processes and/or initiatives. The rotational schedule will be determined by the Quality Manager as necessary. Essential Duties and Responsibilities include the following: Knowledge of and/or commitment to learn the following responsibilities: * Ensure quality of manufactured goods * Inspect finished goods * Examine materials from suppliers before sending them to production * Inspect components, subassemblies, and assemblies * Perform quick visual inspections * Perform complex tests using instruments and equipment * Test, measure, and analyze products * Take samples for testing * Ensure company is meeting the standard codes in the manufacturing process * Record pass/fail grade of products * Produce detailed reports * Comply with various ISO operating procedures, work instructions * Observe dials, gauges and indicators to make sure that a machine is working properly * Count numbers of products tested or inspected * Process associated documentation including process tags, rework tags and nonconforming material documents * RMA - issuing and processing * Responsible for final inspection and signoff, and will stamp "OK-Lead" Supervisory Responsibilities This position does not have any supervisory responsibilities. Education High school diploma or general education degree (GED); or a minimum of two years related manufacturing experience and/or training; or equivalent combination of education and experience with an emphasis in quality inspecting. Skills/Experience * 3+ years of quality or other related business experience * Bachelor's Degree in a technical discipline is preferred or equivalent field experience or training * Practical knowledge of Lean business practices * Excellent time management, communication, customer service, and interpersonal skills * Strong analytical skills * Ability to read, interpret and work from drawing, specifications and standards * Ability to inspect parts & components to tight tolerances and specifications * Required: Basic ability to add, subtract, multiply and divide in all units of measure * Required: Intermediate knowledge and skills in the use of standard mechanical and electrical instruments, gauges and test rigs * Required: Basic ability to work under direct supervision and to follow written instructions and techniques * Required: Basic ability to write simple correspondence * Required: Basic efficient time management * Required: Intermediate decision making * Required: Intermediate computer skills, including Microsoft office Travel No travel required Physical Demands To perform this job successfully, the physical demands listed are representative of those that must be met by an employee. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands to handle and feel, reach with hands and arms, talk and hear. The employee may occasionally be required to crouch. The employee may occasionally lift items as heavy as 50lbs. Specific vision abilities may include the employee's ability to see near and far distances. WORKING CONDITIONS Ability to work in normal manufacturing and varying climate control office environment. When working occasionally in some shop areas, personal protection equipment (PPE) will be recommended and/or required (safety shoes, safety glasses w/side shields, hearing protection, face shield, gloves, apron, and boots). Stress may result from workload and meeting schedules. Must have the ability to support extended business hours to meet customer business needs. The ability to multitask is essential job function for this role. * Shift schedule is (4) 10- hour days Monday - Thursday 6:00am - 4:30pm * Friday is reserved for overtime as necessary and may be required * Exposed to loud sounds and distracting noise level DISCLAIMER: The above information on this has been designed to indicate the general nature and level of work performed by the employee within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of any employee assigned to this job. Nothing in this job description restricts management's right to assign duties and responsibilities to this job at any time. QUALITY Quality encompasses all aspects of DeZURIK, Inc.'s business, and every employee shares the responsibility to prevent the occurrence of any nonconformity relating to product, process, and the quality system. All employees have an obligation to identify and record any such nonconformity, and, through designated channels, initiate and recommend solutions. BENEFITS DeZURIK offers a generous benefit package including medical, dental, vision, life insurance, disability, accident, critical illness, and 401(k). Health savings, flexible spending, and dependent care accounts are also available as part of the benefit package. Holiday pay, PTO, and volunteer time are available.

Quality Inspector - New Residential Plumbing Quality Inspector Florence, South Carolina $35,000-$45,000 Based on Experience We are a family-owned and operated company with a strong commitment to our employees and clients. We are seeking a dedicated Quality Inspector to join our team. As a plumbing Quality Inspector, you will be responsible for inspecting plumbing systems in new construction homes, ensuring that all work is performed to the highest standards. We offer competitive pay and benefits package, a supportive work environment, and opportunities for growth within our company. Does This Sound Like You? A keen eye for spotting even minor plumbing issues that could lead to bigger problem Understand plumbing systems, materials, and installation techniques, as well as local building codes Assess plumbing installations and determine whether they meet safety and quality standards Ability to explain findings clearly to builders and contractors Don't just identify issues, but also recommend solutions Uphold industry standards and ensure compliance with regulations Enjoy working in the field rather than being confined to an office The Experience We'd Love To See: A strong understanding of plumbing systems, materials, and installation techniques is essential Previous experience in home inspections or quality control, especially in construction or plumbing, is highly valued A thorough knowledge of local, state, and national plumbing codes is crucial for ensuring compliance The ability to identify even minor issues in plumbing installations is key to maintaining high-quality standards Inspectors often need to explain findings to builders, contractors, or homeowners, so clear and professional communication is important The ability to recommend solutions for non-compliance or defects is a valuable asset What You'll Get To Do: Examine installations, fixtures, and equipment to ensure they function properly and meet regulatory requirements Prepare detailed inspection reports and maintaining records Spotting violations or non-compliance and recommending corrective actions Advising contractors, plumbers, and property owners on plumbing regulations and safety standards Keep up with changes in plumbing codes, regulations, and industry trends Why You Want This Job: The demand for quality plumbing inspections remains strong, especially with ongoing residential construction projects If you enjoy practical problem-solving and working in the field rather than in an office, this role offers plenty of opportunities You play a crucial role in making sure plumbing systems meet safety standards and function properly With experience, you can advance into supervisory roles Plumbing inspectors often earn solid wages, especially with developing experience You help homeowners avoid costly plumbing issues by ensuring installations are done right the first time This Position Offers: A fast-growing industry with a rapidly expanding company Family friendly atmosphere Monday-Friday work week with weekly pay Health, prescription drug, vision, and dental insurance available Short- and long-term disability as well as life insurance available Matching 401(k) with potential yearly holiday bonus Great Work-Life balance and Employee Assistance Program offered Quality Inspectors are problem solvers who ensure that vital systems run smoothly, keeping water clean, waste safely managed, and living and workspace comfortable. Interested in learning more? Please apply now to join our fanatical plumbing family! Experience: Minimum of 2-5 years of experience in residential plumbing, construction inspection, or quality control. Knowledge: Comprehensive understanding of plumbing systems, installation techniques, materials, and local/state plumbing codes in South Carolina, North Carolina, or Georgia. Certification: Plumbing license, inspection certification, or equivalent technical training preferred. Technical Skills: Ability to read and interpret blueprints, schematics, and building plans. Proficiency in completing inspection reports using digital tools or mobile applications. Attention to Detail: Strong ability to identify workmanship defects, code violations, and performance issues before they escalate. Communication: Excellent verbal and written communication skills to clearly explain inspection findings and corrective actions to contractors, builders, and team members. Problem Solving: Analytical mindset with the ability to recommend effective solutions for non-compliant installations. Physical Requirements: Must be able to walk construction sites, climb ladders, bend, and lift up to 40 lbs as needed for inspections. Work Ethic: Reliable, self-motivated, and able to manage multiple inspection assignments independently while maintaining accuracy and consistency. Licensing & Compliance: Must hold a valid driver's license, maintain a clean driving record, and comply with all safety and OSHA standards.

Dynacast, LLC, a Form Technologies Company, is currently looking for a hard-working and reliable Quality Inspector on 2nd and 3rd shifts. Come join a global leader in precision die-casting; be part of a team producing exceptional metal components for a diverse range of industries by conducting quality inspections at the die-casting machines and launch your career in the die-casting industry. 2nd Shift Pay: Starting at $18.00 per hour plus 10%-night shift premium, Based on experience 2nd Shift Hours: 3:00pm-11:30pm 3rd Shift Pay: Starting at $18.00 per hour plus 15%-night shift premium, Based on experience 3rd Shift Hours: 11:30pm-8:00am Responsibilities Assist operators and fellow inspectors with questions pertaining to quality standards. Verification and recording of first off, final, and receiving inspections. Visual product analysis and audits. Advise Production Supervisors, Quality Engineers, and Quality Manager of any observed nonconformities. Document statistical process control (SPC) readings. Maintaining lot control traceability documentation during manufacturing process. Operates and maintains all measurement equipment that pertains to quality inspections. Qualifications and Experience One-year certificate from college or technical school; minimum two years related experience and/or training; or equivalent combination of education and experience. Preferred experience and/or training with mechanical and calibration inspection, understanding of SPC, GD&T, measuring and test equipment and statistical analysis. We offer a competitive compensation and benefits package which includes: • Medical, Vision and Dental Insurance • Life Insurance • Disability Insurance • 401K with generous employer match • Paid Time Off - Sick Days, Vacation Days and Paid Holidays All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. To find out more about who we are visit our website: *****************

Job Description Dynacast, LLC, a Form Technologies Company, is currently looking for a hard-working and reliable Quality Inspector on 2nd and 3rd shifts. Come join a global leader in precision die-casting; be part of a team producing exceptional metal components for a diverse range of industries by conducting quality inspections at the die-casting machines and launch your career in the die-casting industry. 2nd Shift Pay: Starting at $18.00 per hour plus 10%-night shift premium, Based on experience 2nd Shift Hours: 3:00pm-11:30pm 3rd Shift Pay: Starting at $18.00 per hour plus 15%-night shift premium, Based on experience 3rd Shift Hours: 11:30pm-8:00am Responsibilities Assist operators and fellow inspectors with questions pertaining to quality standards. Verification and recording of first off, final, and receiving inspections. Visual product analysis and audits. Advise Production Supervisors, Quality Engineers, and Quality Manager of any observed nonconformities. Document statistical process control (SPC) readings. Maintaining lot control traceability documentation during manufacturing process. Operates and maintains all measurement equipment that pertains to quality inspections. Qualifications and Experience One-year certificate from college or technical school; minimum two years related experience and/or training; or equivalent combination of education and experience. Preferred experience and/or training with mechanical and calibration inspection, understanding of SPC, GD&T, measuring and test equipment and statistical analysis. We offer a competitive compensation and benefits package which includes: • Medical, Vision and Dental Insurance • Life Insurance • Disability Insurance • 401K with generous employer match • Paid Time Off - Sick Days, Vacation Days and Paid Holidays All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. To find out more about who we are visit our website: ***************** Job Posted by ApplicantPro

careersite--jobs--form-overlay#show FormOverlay" data-careersite--jobs--form-overlay-target="cover Button"> Apply for this job blocks--cover--scroll#handle ScrollDown" title="Scroll to content"> Quality Inspector Job Description The Quality Inspector will be responsible for performing and documenting inspections supporting a project team with the following tasks; including but not limited to: * Perform various inspections i.e. Welding, Dimensional, Visual, etc… * Generate all required inspection reports * Coordinate quality inspections with all the site sub-contractors and vendors * Coordinate all nondestructive testing on site * Complete and coordinate the approval of the site QC technical submittals with the customer * Coordinate with the customers representative on all quality matters * Performing receiving inspection of equipment and material Requirements * AWS CWI Certification Preferred * Additional NDE certifications preferred (VT, PT or LT) * Experienced in ASME and AWS codes * Ability to communicate clearly and effectively * Proficient with learning and applying technical concepts * Willingness to learn and adapt quickly in a fast-paced environment * Communicate effectively on the phone and in person. * Display diplomacy and tact in collaborating with a wide variety of colleagues, customers, and suppliers * Microsoft Office Suite (particularly Excel and Word) Benefits: * Medical, Dental, and Vision * 401K with company Match * STD, LTD, Voluntary Life benefits * Paid Time off Affirmative Action/EEO statement As an Affirmative Action, Equal Opportunity Employer, Apollo Mechanical Contractors "Apollo" ensures that no applicant for employment or employee of Apollo is denied equal opportunity because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability (mental or physical), genetic information, veteran status, or any other characteristic any characteristic of his or her relatives, friends, or associates. All employees are subject to a pre-employment drug screen. Department PROFESSIONAL/ADMIN Role QA/QC Inspector Locations Tennessee About Apollo Mechanical Contractors Apollo Mechanical Contractors is a Native American-owned business that officially began operations in 1981 under the guidance and vision of owner Bruce Ratchford. Apollo is based in Kennewick, Washington, performing Full Mechanical projects across the United States and around the world. Apollo employs over 2000 people, with annual revenues of over $600 Million. Apollo Sheet Metal officially began operations in 1981, building on a vision that originated in the mid-1970s by owner Bruce Ratchford. With a decade of experience and expertise in mechanical design and business management, Mr. Ratchford incorporated Apollo in Richland Washington, to serve the Tri-Cities' construction needs. Since 1981, Apollo has expanded its market to include locations across the United States and multiple countries. Apollo has progressively grown larger than its original scope and has expanded its operations to specialize in mechanical construction for correctional facilities, hospitals, laboratories, high tech data centers, schools, and industrial facilities. careersite--jobs--form-overlay#show FormOverlay">Apply for this job PROFESSIONAL/ADMIN · Tennessee Quality Inspector Loading application form jobs--overlay#close Overlay">

Takeuchi Mfg (US) Ltd, a global manufacturer of construction equipment, has launched its first North American assembly facility in Moore, SC. Takeuchi (pronounced Tok eh oo chee) is building a first-class workforce in a modern facility with an ideal work schedule. Shift hours: Monday - Thursday 6am- 4:30pm Starting wage: $20.00 per hour Takeuchi Mfg (US) Ltd offers a competitive benefits package including affordable medical, dental and vision coverage, 401(k) - 100% match on 1st 4%, PTO, paid holidays, and wellness benefits! Job Duties: Inspects output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality. Checks that the assembly or production line adheres to standards and procedures and complies with legal requirements Reviews standards and specifications to compare to produced goods Records inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database Trains the production team on quality control measures to improve product excellence Proposes improvements to the production process Keeps measurement equipment operating accurately by following calibration requirements and calling for repairs Reads and interpreting drawings/work instructions Using gauges such as calipers and micrometers to measure products Collects and compiles statistical quality data Assist in the development of test methods and inspection plans Determines the causes of product defects and provides minor rework Verifies all equipment is calibrated correctly and safely Qualifications Education and Experience Required: High School Degree or GED Proven experience in Quality (Minimum 2 years) Further qualifications will be a plus (Testing, auditing, troubleshooting, assembly, painting, welding) A keen eye for detail and a results-driven approach Responsible and trustworthy Familiar with quality testing machines and systems Ability to read measurements on calipers, micrometers, and other required measuring equipment Ability to perform multiple tasks in a fast-paced environment to assure delivery requirements Physical Demands Must be able to lift 25lbs at a time Physically able to conduct inspections and carry equipment used for inspections. (Climbing in and out of equipment, bending, lifting objects) Shift hours: Monday - Thursday 6am- 4:30pm Starting wage: $20.00 per hour Takeuchi Mfg (US) Ltd offers a competitive benefits package including affordable medical, dental and vision coverage, 401(k) - 100% match on 1st 4%, PTO, paid holidays, and wellness benefits! Takeuchi Mfg (US) Ltd is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or protected veteran status.

Key Accountabilities: * Accurately inspect materials and products with gauges, scales, or other measurement instruments as required and according to work instructions. * Management of non-conforming parts or material. * Maintain the system for the documentation for work performed. * Perform data entry of work results into appropriate databases. * May be required to identify causes of non-conformance. * Ability to access and work in SAP or other Warehouse Management System. * Meets TKMNA Employee Attributes/Competencies. The above is intended to describe the general content of and requirement for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements. This position has been identified as "safety sensitive" by thyssenkrupp under applicable laws. Accordingly, any application for this position that is considered for employment with thyssenkrupp requires successful completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws. Qualifications: Minimum Requirements: * This position requires access to export-controlled technical data or technology. Employment is contingent upon obtaining any required export authorization from the appropriate government agency or agencies. * When export authorization is necessary, the length of time to obtain the authorization by the government is outside of the Company's control. * Prior experience using basic measurement instruments and blueprint interpretation. * Prior experience in a quality assurance inspection position. * Prior experience with CMM inspection equipment. * Ability to read and write English and perform basic math problems. * Basic computer knowledge to complete data entry. * Attention to detail and accuracy. * Ability to accurately inspect material, commodities, and/or processes. Preferred requirements: * Some college courses or certificates in Quality Assurance-related field of study Benefits Overview We offer competitive company benefits to eligible positions, such as : * Medical, Dental, Vision Insurance * Life Insurance and Disability * Voluntary Wellness Programs * 401(k) and RRSP programs with Company Match * Paid Vacation and Holidays * Tuition Reimbursement * And more! Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information. Disclaimer This is to notify the general public that some individuals/entities are using the thyssenkrupp ("TK") name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information. TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers. TK does not: 1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.; 2. Request payment of any kind from prospective jobseekers or candidates for employment; 3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK; 4. Send checks to job seekers; or 5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties. PLEASE NOTE: 1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner; 2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK; 3. Anyone making an employment offer in return for money is not authorized by TK; and 4. TK reserves the right to take legal action, including criminal action, against such individuals/entities. TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK. If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************. We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates. Company With around 480 locations in over 40 countries, thyssenkrupp Materials Services is the biggest materials distributor and service provider in the western world. The broad service spectrum offered by the materials experts enables customers to focus on their individual core business. The area of Materials Services spans two strategic areas: global materials distribution as one-stop-shop - from steel and stainless steel, tubes and pipes, nonferrous metals and specialty materials to plastics and raw materials - and tailored services in the areas of materials management and supply chain management. An extensive omnichannel architecture offers 250,000 customers worldwide cross-channel, round-the-clock access to more than 150,000 products and services. A highly efficient logistics system ensures that all requested services are smoothly integrated into customer production processes "just-in-time" or "just-in-sequence. thyssenkrupp Aerospace is a subsidiary of the internationally operating thyssenkrupp Group. We focus on supplying aerospace raw materials and finished part logistics to the world's leading aerospace companies and their supply chains. Operating from 35 service centers in 15 countries throughout the Americas, Europe and Asia Pacific enables us to aggregate demand across a single supply chain on behalf of the world's leading OEM's, while at the same time providing a truly responsive local service to meet the needs of individual subcontractors anywhere in the world. We value diversity Diversity promotes appreciation of all the individual strengths and differences in the workforce; it is a driver and an expression of our corporate culture. We feel companies that give equal support to all employees regardless age, disability, ethnicity, gender/gender identity or sexual orientation enjoy important competitive advantages and are more efficient. So we can harness diversity to the benefit of employees and the company. What's more, greater diversity leads to greater innovation in the company. thyssenkrupp Materials NA Inc. and the affiliated group companies and business units including Copper and Brass Sales, Engineered Plastics, Ken-Mac Metals, OnlineMetals, thyssenkrupp Steel Services, thyssenkrupp Supply Chain Services, and thyssenkrupp Materials de Mexico. Also including thyssenkrupp Materials Trading NA, LLC and thyssenkrupp Materials, LLC (Aerospace) are equal opportunity employers. Qualified applicants will receive consideration for employment without regard to age, sex, race, color, religion, national origin, genetics, disability, gender identity, marital status, sexual orientation, veteran status or any other protected characteristic required by applicable law. Applicants with disabilities who require reasonable accommodation in connection with the application process are encouraged to contact us directly.

Quality Inspector - New Residential Plumbing Quality Inspector Lexington, South Carolina $35,000-$45,000 Based on Experience We are a family-owned and operated company with a strong commitment to our employees and clients. We are seeking a dedicated Quality Inspector to join our team. As a plumbing Quality Inspector, you will be responsible for inspecting plumbing systems in new construction homes, ensuring that all work is performed to the highest standards. We offer competitive pay and benefits package, a supportive work environment, and opportunities for growth within our company. Does This Sound Like You? A keen eye for spotting even minor plumbing issues that could lead to bigger problem Understand plumbing systems, materials, and installation techniques, as well as local building codes Assess plumbing installations and determine whether they meet safety and quality standards Ability to explain findings clearly to builders and contractors Don't just identify issues, but also recommend solutions Uphold industry standards and ensure compliance with regulations Enjoy working in the field rather than being confined to an office The Experience We'd Love To See: A strong understanding of plumbing systems, materials, and installation techniques is essential Previous experience in home inspections or quality control, especially in construction or plumbing, is highly valued A thorough knowledge of local, state, and national plumbing codes is crucial for ensuring compliance The ability to identify even minor issues in plumbing installations is key to maintaining high-quality standards Inspectors often need to explain findings to builders, contractors, or homeowners, so clear and professional communication is important The ability to recommend solutions for non-compliance or defects is a valuable asset What You'll Get To Do: Examine installations, fixtures, and equipment to ensure they function properly and meet regulatory requirements Prepare detailed inspection reports and maintaining records Spotting violations or non-compliance and recommending corrective actions Advising contractors, plumbers, and property owners on plumbing regulations and safety standards Keep up with changes in plumbing codes, regulations, and industry trends Why You Want This Job: The demand for quality plumbing inspections remains strong, especially with ongoing residential construction projects If you enjoy practical problem-solving and working in the field rather than in an office, this role offers plenty of opportunities You play a crucial role in making sure plumbing systems meet safety standards and function properly With experience, you can advance into supervisory roles Plumbing inspectors often earn solid wages, especially with developing experience You help homeowners avoid costly plumbing issues by ensuring installations are done right the first time This Position Offers: A fast-growing industry with a rapidly expanding company Family friendly atmosphere Monday-Friday work week with weekly pay Health, prescription drug, vision, and dental insurance available Short- and long-term disability as well as life insurance available Matching 401(k) with potential yearly holiday bonus Great Work-Life balance and Employee Assistance Program offered Quality Inspectors are problem solvers who ensure that vital systems run smoothly, keeping water clean, waste safely managed, and living and workspace comfortable. Interested in learning more? Please apply now to join our fanatical plumbing family! Experience: Minimum of 2-5 years of experience in residential plumbing, construction inspection, or quality control. Knowledge: Comprehensive understanding of plumbing systems, installation techniques, materials, and local/state plumbing codes in South Carolina, North Carolina, or Georgia. Certification: Plumbing license, inspection certification, or equivalent technical training preferred. Technical Skills: Ability to read and interpret blueprints, schematics, and building plans. Proficiency in completing inspection reports using digital tools or mobile applications. Attention to Detail: Strong ability to identify workmanship defects, code violations, and performance issues before they escalate. Communication: Excellent verbal and written communication skills to clearly explain inspection findings and corrective actions to contractors, builders, and team members. Problem Solving: Analytical mindset with the ability to recommend effective solutions for non-compliant installations. Physical Requirements: Must be able to walk construction sites, climb ladders, bend, and lift up to 40 lbs as needed for inspections. Work Ethic: Reliable, self-motivated, and able to manage multiple inspection assignments independently while maintaining accuracy and consistency. Licensing & Compliance: Must hold a valid driver's license, maintain a clean driving record, and comply with all safety and OSHA standards.

Job DescriptionSalary: Were looking for can-do people who dont stand on ceremony, who arent thrown off by hard work, and who believe engineering is a team sport. If thats you, apply now for our Lead Inspector opportunity in either our Idaho Falls or Pocatello, Idaho office. This is an exciting opportunity for a motivated person ready to take the next step in their career and contribute to our growing operations. Job Summary: The Lead Inspector will spend part or all of most days in the field on a construction project. They act under the direction of the Engineer as the Engineers representative at the project construction site, observing and documenting construction activities to verify the work is progressing in conformance with the plans, specifications, and contract documents. Responsibilities include: Inspect, observe, and document the work in progress by the contractor. Act as a liaison between the Engineer, Owner, and the Contractor to facilitate communication Prepare daily reports to document work progress, site conditions, and decisions made Participate in and prepare notes for project meetings Maintain records for use in preparing project documentation Review applications for payment with the Contractor and forward with recommendations to the Engineer Participate in Engineers visits to the site to assess work progress Other duties as assigned Required Skills/Abilities: IQP certifications required Ability to read and understand construction drawings and specifications Ability to read and understand standard agency speciation's including the Idaho Transportation Departments standard specifications, the Idaho Standards for Public Works Construction (ISPWC) and the Ada County Highway District Supplement to the ISPWC. Experience with accurate record-keeping Familiarity with public works construction processes and documentation Capable of working outdoors in adverse weather conditions over rough terrain Good written and verbal communication skills Familiarity with AASHTOWare and ProjectWise a plus Education and Experience: Hold Western Alliance for Quality Transportation Constructioncertifications, or ability to obtain them as soon as the role begins. This qualification is waived if applicant holds a degree in civil engineering or construction management. Hold active Idaho Qualified Personnel testing qualifications for the Idaho Transportation Department, or ability to obtain as soon as role begins. High School diploma or GED with a minimum of 3 years of construction and field experience. Valid driver license with an acceptable driving record. Proficient with Microsoft Office and Bluebeam Proficient with photographic and written documentation Benefits: Paid employee health, dental, and vision insurance Partially paid health, dental, and vision insurance for dependents Remote-friendly options Short-term and long-term disability insurance Life insurance Employee assistance program (EAP) Flexible spending account (FSA) Health reimbursement arrangement (HRA) 401k match program and access to asset management services Year-end bonus Costco membership Paid time off (PTO) and PTO sell back program Parental leave Tuition Reimbursement Paid day of community service We are a mid-sized consulting firm providing water, wastewater, civil, transportation, and structural engineering services throughout the West including Oregon, Washington, Idaho, Nevada, and Utah. We provide client-focused solutions in surface water, water and wastewater engineering, as well as transportation planning, roadway, bridges and vertical structures, site civil design, construction management, electrical, controls, and surveying. Our clients include federal, state, and local agencies as well as small and medium sized cities. Our work is never boring and always influences the communities we serve. We take joy in everything we do from work to play our staff finds ways to be more human and balanced. Please review the Voluntary Self-Identification of Disability form found hereto answer the questions provided at the bottom of the application process. Keller Associates, Inc. is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

We're looking for can-do people who don't stand on ceremony, who aren't thrown off by hard work, and who believe engineering is a team sport. If that's you, apply now for our Lead Inspector opportunity in either our Idaho Falls or Pocatello, Idaho office. This is an exciting opportunity for a motivated person ready to take the next step in their career and contribute to our growing operations. Job Summary: The Lead Inspector will spend part or all of most days in the field on a construction project. They act under the direction of the Engineer as the Engineer's representative at the project construction site, observing and documenting construction activities to verify the work is progressing in conformance with the plans, specifications, and contract documents. Responsibilities include: Inspect, observe, and document the work in progress by the contractor. Act as a liaison between the Engineer, Owner, and the Contractor to facilitate communication Prepare daily reports to document work progress, site conditions, and decisions made Participate in and prepare notes for project meetings Maintain records for use in preparing project documentation Review applications for payment with the Contractor and forward with recommendations to the Engineer Participate in Engineer's visits to the site to assess work progress Other duties as assigned Required Skills/Abilities: IQP certifications required Ability to read and understand construction drawings and specifications Ability to read and understand standard agency speciation's including the Idaho Transportation Departments standard specifications, the Idaho Standards for Public Works Construction (ISPWC) and the Ada County Highway District Supplement to the ISPWC. Experience with accurate record-keeping Familiarity with public works construction processes and documentation Capable of working outdoors in adverse weather conditions over rough terrain Good written and verbal communication skills Familiarity with AASHTOWare and ProjectWise a plus Education and Experience: Hold Western Alliance for Quality Transportation Construction certifications, or ability to obtain them as soon as the role begins. This qualification is waived if applicant holds a degree in civil engineering or construction management. Hold active Idaho Qualified Personnel testing qualifications for the Idaho Transportation Department, or ability to obtain as soon as role begins. High School diploma or GED with a minimum of 3 years of construction and field experience. Valid driver license with an acceptable driving record. Proficient with Microsoft Office and Bluebeam Proficient with photographic and written documentation Benefits: Paid employee health, dental, and vision insurance Partially paid health, dental, and vision insurance for dependents Remote-friendly options Short-term and long-term disability insurance Life insurance Employee assistance program (EAP) Flexible spending account (FSA) Health reimbursement arrangement (HRA) 401k match program and access to asset management services Year-end bonus Costco membership Paid time off (PTO) and PTO sell back program Parental leave Tuition Reimbursement Paid day of community service We are a mid-sized consulting firm providing water, wastewater, civil, transportation, and structural engineering services throughout the West including Oregon, Washington, Idaho, Nevada, and Utah. We provide client-focused solutions in surface water, water and wastewater engineering, as well as transportation planning, roadway, bridges and vertical structures, site civil design, construction management, electrical, controls, and surveying. Our clients include federal, state, and local agencies as well as small and medium sized cities. Our work is never boring and always influences the communities we serve. We take joy in everything we do - from work to play - our staff finds ways to be more human and balanced. Please review the Voluntary Self-Identification of Disability form found here to answer the questions provided at the bottom of the application process. Keller Associates, Inc. is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Who We Are Genesis Products is a fast-paced, rapidly growing organization looking for new talent to join our team! At Genesis, our most valuable resource is our personnel. With a dynamic, rewarding, and positive work culture, we truly are a people-powered business. We are committed to creating a diverse environment and are proud to be an equal opportunity employer. What You Need to Know Genesis Products is seeking an experienced 2nd shift Quality Inspector for our fabrication manufacturing plant specializing in wood panel processing. The ideal candidate will be responsible for: Product Inspections: Conduct detailed inspections of raw materials, in-process products, and finished goods to ensure they meet company quality standards and customer specifications. Defect Identification and Reporting: Identify defects such as dimensional inaccuracies, surface imperfections, or material inconsistencies and document findings accurately. Testing and Measurement: Use measurement tools (e.g., calipers, micrometers, tape measures) to verify product dimensions and tolerances. Process Monitoring: Monitor production processes to ensure adherence to quality control protocols and recommend adjustments when necessary. Collaboration with Teams: Work closely with production operators, supervisors, and the teammates to address quality concerns and implement solutions. Compliance with Standards: Ensure all inspection activities comply with company policies, safety standards, and industry regulations. Required Skills and Abilities Quality Control Expertise: Proven experience in quality inspection within a manufacturing or wood panel processing environment. Measurement Tools Proficiency: Skilled in using tools such as calipers, micrometers, tape measures, or other precision instruments for inspections. Attention to Detail: Strong ability to identify defects or deviations from specifications with accuracy and consistency. Documentation Skills: Ability to maintain detailed inspection records and communicate findings effectively. Problem-Solving Skills: Capability to recommend corrective actions or process improvements based on inspection results. Team Collaboration: Effective communication skills for working with production teams to resolve quality issues promptly. Safety Awareness: Commitment to maintaining a safe workspace by adhering to safety protocols during inspections. Basic Computer Skills: Competence in using software or systems for logging inspection data and generating reports. Physical Stamina: Ability to stand for extended periods and perform repetitive tasks in a fast-paced manufacturing environment.

Who We Are Genesis Products is a fast-paced, rapidly growing organization looking for new talent to join our team! At Genesis, our most valuable resource is our personnel. With a dynamic, rewarding, and positive work culture, we truly are a people-powered business. We are committed to creating a diverse environment and are proud to be an equal opportunity employer. What You Need to Know Genesis Products is seeking an experienced Quality Inspector for our fabrication manufacturing plant specializing in wood panel processing. The ideal candidate will be responsible for: Product Inspections: Conduct detailed inspections of raw materials, in-process products, and finished goods to ensure they meet company quality standards and customer specifications. Defect Identification and Reporting: Identify defects such as dimensional inaccuracies, surface imperfections, or material inconsistencies and document findings accurately. Testing and Measurement: Use measurement tools (e.g., calipers, micrometers, tape measures) to verify product dimensions and tolerances. Process Monitoring: Monitor production processes to ensure adherence to quality control protocols and recommend adjustments when necessary. Collaboration with Teams: Work closely with production operators, supervisors, and the teammates to address quality concerns and implement solutions. Compliance with Standards: Ensure all inspection activities comply with company policies, safety standards, and industry regulations. Required Skills and Abilities Quality Control Expertise: Proven experience in quality inspection within a manufacturing or wood panel processing environment. Measurement Tools Proficiency: Skilled in using tools such as calipers, micrometers, tape measures, or other precision instruments for inspections. Attention to Detail: Strong ability to identify defects or deviations from specifications with accuracy and consistency. Documentation Skills: Ability to maintain detailed inspection records and communicate findings effectively. Problem-Solving Skills: Capability to recommend corrective actions or process improvements based on inspection results. Team Collaboration: Effective communication skills for working with production teams to resolve quality issues promptly. Safety Awareness: Commitment to maintaining a safe workspace by adhering to safety protocols during inspections. Basic Computer Skills: Competence in using software or systems for logging inspection data and generating reports. Physical Stamina: Ability to stand for extended periods and perform repetitive tasks in a fast-paced manufacturing environment. Qualifications $1,000 onboarding bonus within your first year! $350 referral bonus Weekly performance bonus Competitive pay Opportunities of advancement through our manufacturing careers program Anniversary and tenure bonus paid yearly Health, vision, dental, and life benefits Immediate participation in our company's 401k program & employer match after 6 months of employment Paid time off and paid holidays

Imagine your career taking you to the depths of innovation and the heights of impact. Our people enable continuous progress. Their commitment, collective expertise, and unique capabilities are the engine room behind SBM Offshore's True. Blue. Transition. - shaping the future of energy, and beyond. About Us: SBM Offshore is the world's deepwater ocean-infrastructure expert. Our work is already resulting in cleaner, more efficient energy production. True. Blue. Transition. is our promise to enable that into the future while at the same time using our expertise to support new and existing markets in the blue economy. It starts with Advancing our Core: continuing to advance the decarbonization of traditional energy production. While Pioneering More: helping to enable the energy transition and using our unique capabilities in ocean infrastructure to support more industries to grow sustainably. Sharing our experience for a better blue tomorrow. Purpose * As Lead Inspection Coordinator, you lead activities to ensure that all equipment, materials, and processes meet industry standards and regulatory requirements. This involves planning, coordinating, and overseeing inspection activities to ensure compliance and safety. Responsibilities * · Inspection Planning: You develop and lead the implementation of inspection plans and schedules based on project requirements and regulatory standards. * · Coordination: You manage the coordination with internal teams, third-party inspectors, and regulatory bodies to facilitate inspection activities. * · Documentation: You maintain and lead the maintenance of comprehensive records of inspection reports, certificates, and non-conformance reports. * · Compliance Monitoring: You ensure all inspections comply with industry standards, company policies, projects requirements and regulatory requirements. * · Issue Resolution: You lead the identification, documentation, and facilitation of the resolution of non-conformances or quality issues. * · Communication: You provide regular updates to the project management team, quality assurance teams, and other stakeholders on inspection status and findings. * · Vendor Liaison: You work with suppliers and contractors to ensure their inspection processes meet project standards. * · Training: You conduct training sessions to the inspection teams on inspection protocols and quality standards' project specifics. * · Mentoring: you mentor and monitor the inspection coordinators' team and support their activities as needed. Education * Bachelor's degree in engineering, quality management, or a related technical field, along with relevant certifications in inspection or quality assurance. Experience * · Proven track-record in leading inspection coordination activities in the oil and gas or similar industry. * · Strong knowledge of industry standards and regulatory requirements. * · Excellent organizational and time-management skills. * · Excellent communication and interpersonal abilities. * · Knowledge of inspection management software and Microsoft Office Suite. * · Attention to detail and problem-solving skills. * · Ability to work under pressure and meet tight deadlines. Functional Competencies Expediting Analytics and reporting Quality Control Plans Regulatory Management Inspection, testing, commissioning and monitoring SBM Product Knowledge Purchasing Tools and Processes Package Management Third parties relation management GENERAL INFORMATION SBM Offshore N.V. is a listed holding company that is headquartered in Amsterdam. It holds direct and indirect interests in other companies that collectively with SBM Offshore N.V. form the SBM Offshore Group ("the Company"). For further information, please visit our website at ******************** The companies in which SBM Offshore N.V., directly and indirectly, owns investments are separate entities. SBM Offshore is proud to be an Equal Employment Opportunity and Affirmative Action employer. SBM Offshore does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities, and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Position is responsible for ensuring the quality of fabricated steel by reviewing design documents, inspecting materials, overseeing production, and conducting final inspections. This role collaborates with the production team to ensure all fabricated steel meets design specifications and quality standards. This role requires someone who is detail-oriented with experience in structural fabrication and quality control. Key Responsibilities: 1. Communicates with various departments such as quality, shipping, and others regarding inspections results and recommends corrective procedures. 2. Conducts final inspections of fabricated equipment for quality and compliance. 3. Ensures correct coatings are applied to fabricated steel. 4. Inspects incoming materials for specification compliance. 5. Mechanical Inspection experience to include, experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication installation. 6. Must be able to use measuring tools such as micrometers, calipers, transits, etc., and be able to set up dial indications and laser alignment devices. 7. Must be able to work in elevated areas. 8. Must have ASNT SNT-TC-1a VT level 11, CWI, or CAWI certification. 9. Must have knowledge of AISC, AWS D1.1, AWS D1.3 and AWS D1.6 Codes. 10. Must have knowledge of ASME Sec. I, ASME Sec. VIII, ASME B31.1 and ASMR B31.3. 11. Must have knowledge of bolt-up inspection including bolt lot verifications following RCSC specifications. 12. Participates in activities to support the company's strategic planning efforts. 13. Participates in the preparation of Quality control lTP. 14. Performs and records all in-process inspections/testing related to maintaining product traceability and run documentation. 15. Performs inspections to ensure product meets specifications. 16. Piping/Vessel Inspection experience level must fall in pressure vessel and pipe fabrication inspection, including welding, supports, instrumentation, etc. (ON056) 17. Structural Inspection experience to include, experience level that must fall within the fabrication of structural steel. 18. Utilizes various measuring and quality control instruments to maintain consistent product performance. 19. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements: 1. 1+ years' experience in fabrication or manufacturing environment. 2. 1+ years' experience in quality control inspection discipline. 3. Ability to work effectively in a fast-paced, team-oriented environment. 4. Excellent attention to detail and ability to identify quality issues. 5. Experience with quality management tracking software. 6. Familiarity with industry standards and regulations in structural fabrication. 7. High School Diploma required. 8. Proficient use of all Microsoft Office Suite programs. 9. Strong communication and interpersonal skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements: 1. May stoop, kneel, or bend, on an occasional basis 2. Must be able to comply with all safety standards and procedures 3. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 4. Will interact with people and technology frequently during a shift/workday 5. Will lift, push or pull objects up to 501bs on an occasional basis. 6. Will sit, stand or walk short distances for up to the entire duration of a shift/workday. 7. Will use telephone, computer system, email, and other electronic devices on a frequent basis to communicate with internal and external customers or vendors Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program

JobID: 9175 JobSchedule: Full time JobShift: : Basic Job Functions. Position is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications. Structural Inspection: Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt up inspection including bolt lot verifications using Skidmore-Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification. Electrical and Instrumentation Inspection: Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards. Mechanical Inspection: Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices. Piping Inspection: Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. #LI-IF1