Manufacturing Engineer jobs at ZF Group

- 1877 jobs

Manufacturing Engineer - Assembly Planning
ZF 4.8
Manufacturing engineer job at ZF Group
About the Team: The Assembly Planning Manufacturing Engineer will join a dynamic and collaborative team within ZF Axle Drives Marysville, LLC, part of Division E - Axle Drives, and will work closely with the international Assembly Planning team as well as the Marysville Engineering team. The team is focused on driving innovation and excellence in axle drive manufacturing. This position plays a key role in guiding technical and assembly planning initiatives across Region North America, supporting industrialization and program launches while ensuring alignment with ZF standards and customer expectations. What you can look forward to as a Manufacturing Engineer: * Oversee assembly planning activities within Region North America to support internal and external customers, including but not limited to pre-planning conceptualization and capital investment analyses, specification development, equipment vendor selection, installation/commissioning of assembly equipment (e.g. first run-off), and production releases of equipment and manufacturing procedures. * Develop capital models for equipment cost estimation activities; analyze cost/pricing differences between new investment and equipment changeovers. * Complete vendor assessments for selection initiatives through on-site visits and performance analyses. * Serve as primary contact/liaison to customer; identify customer specifications for new and existing products and develop equipment and assembly process specifications (i.e. design changes, new features, etc.). * Ensure implementation of planning phase for equipment installations in the plant related to pre-series and launch management projects in coordination with the manufacturing planning department in Germany. * Establish planning and corrective action procedures for production and maintenance teams to ensure minimal operation downtime and commercial impact for line stoppages or cycle times. * Support change management processes regarding launch management timing and engineering change implications (i.e. quotations, validations, timing, communications to affected departments/groups, etc.). Your profile as a Manufacturing Engineer: * B.S. in Mechanical Engineering, Industrial Engineering or related Engineering field. * 5+ years of manufacturing engineering experience within a Tier-1 Supplier or OEM environment. * 3+ years of experience with project supervision in one or more of the following areas: industrialization, manufacturing engineering, manufacturing planning, and/or program/launch management. * 2+ years of experience with Bills of Material (BOM) structures, manufacturing equipment/tooling planning, design change procedures, and the technical and manufacturing facets of product development. * Knowledge of passenger car powertrain technology. Basic understanding of the technical facets & economics of the axle or driveline industry * Proficient with Axalant or comparable engineering change system. * Ability/willingness to travel both domestically and internationally (up to 30%) - e.g. to Germany, etc. * Must be authorized to work in the United States without sponsorship now or in the future. Why you should choose ZF in Marysville: * Annual Incentive Plan * Paid Time Off * 401k Plan * Health Care Benefits * Paid Holidays * A supportive collaborative team environment * A strong diversity culture * Supportive Employee Groups and community outreach activities Additional Information ZF does not offer visa sponsorship for this role (e.g., H-1B, TN), and candidates must be authorized to work in the U.S. without requiring sponsorship by ZF now or in the future. This role also does not include any immigration-related support, including-but not limited to-being listed on government forms, providing documentation for work authorization, coordinating with universities, or participating in training plans or other procedures related to visa status (e.g., H-1B, TN, F-1 OPT/CPT, J-1, O-1, L-1, E-3, and any other status requiring employer sponsorship or immigration-related support). IF YOU REQUIRE ANY FORM OF VISA SPONSORSHIP OR ANY IMMIGRATION SUPPORT NOW OR IN THE FUTURE, PLEASE DO NOT APPLY. Be part of our ZF team as Manufacturing Engineer III-Assembly Planning and apply now! DIVERSITY COMMITMENT: Diversity, Equity and Inclusion are more than just words for us. They are at the core of the ZF Way that propels our team members towards their utmost success. We strive to build and nurture a culture where inclusiveness is a natural reflex. We actively seek ways to remove barriers so that every member of ZF can rise to their full potential. We aim to embed this in our legacy through how we operate and build our products as we shape next generation mobility, safety, sustainability and social justice. With four generations across 118 nationalities in 41 countries, ZF combines a unique variety of backgrounds, perspectives, and ideas. Together, we solve problems, drive innovation and shape next generation mobility. Our company is committed to the principles of Equal Employment Opportunity and to providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment with us and are in need of accommodation or special assistance to navigate our website or to complete your application, please contact us. Requests for reasonable accommodation will be considered on a case-by-case basis. ZF is an Equal Opportunity and Affirmative Action Employer and is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Equal Employment Opportunity/Affirmative Action Employer M/F/Disability/Veteran What does DEI (Diversity, Equity, Inclusion) mean for ZF as a company? At ZF, we continuously strive to build and maintain a culture where inclusiveness is lived and diversity is valued. We actively seek ways to remove barriers so that all our employees can rise to their full potential. We aim to embed this vision in our legacy through how we operate and build our products as we shape the future of mobility. Find out how we work at ZF: Nearest Major Market: Port Huron Nearest Secondary Market: Detroit Job Segment: Manufacturing Engineer, Industrial Engineer, Mechanical Engineer, Equity, Engineering, Automotive, Finance
$58k-71k yearly est. 40d ago
Mechanical Engineer - Vanair
Lincoln Electric 4.6
Michigan City, IN jobs
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Michigan City Employment Status: Salary Full-Time Function: Engineering Pay Range: ($74,603.39 - $138,549.16) Target Bonus: 8.0% Req ID: 27301 Overview Vanair , a Lincoln Electric company, has been an industry leader since 1972, working to bring our customers the very best in Mobile Power Solutions . Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxyfuel cutting equipment, and has a leading global position in brazing and soldering alloys. We are recognized as the Welding Expert™, which advance customers' fabrication capabilities to help them build a better world. If you like being challenged, want to be a part of something special, and desire being part of an exciting team that is always striving to be at the forefront of our industry, then we're looking for you - a driven and motivated new team member. We are currently seeking to hire a Mechanical Engineer at our location in Michigan City, Indiana. Job Summary As a member of the Engineering staff, the Mechanical Design Engineer will design, test and develop, and maintain products, options, and accessories following company and industry standards. Primary Duties and Responsibilities Design and specify product component parts, subassemblies, and complete assemblies (New Product Development). Assist R&D personnel with set-up and laboratory testing to validate product performance. Analyze and interpret test data and make product revisions as necessary to comply with performance and safety requirements. Read, create, and maintain engineering documents such as exploded part assemblies, basic wiring and electrical schematics, and fabrication/machined detail drawings. Use the ECN (Engineering Change Notice) process to effectively and efficiently manage change aimed toward product improvement. Formulate product design specifications and update as required. Support assembly line by analyzing and solving problems or obstacles that occur during production. Help train production line and service departments for new builds and product improvements. Productively function in a fast-paced Engineering department that works intimately with manufacturing plant, sales personnel, and Service/Training team. Occasionally travel to assist with new applications, diagnostics, or trade shows. Assist with maintaining applications/equipment and how they integrate with evolving model year truck manufacturer changes. Other duties as assigned. Up to 50% travel to customer sites expected throughout North America Job Qualifications and Skills Mechanical Engineering, Technologist or related degree preferred, but will consider relevant work experience in lieu of a degree. Minimum 3 years experience in design, troubleshooting, and analysis of pneumatic, electrical, mechanical, and hydraulic controls and systems. Experience with rotary screw compressors. Good aptitude with hydraulic and mechanical driven equipment. Experience with automotive power train - work trucks, large equipment, and PTO proficiency is a plus. 2D / 3D CAD drawing environment experience (AutoCAD and Inventor preferred). Must be able to juggle priorities effectively. Must have a positive attitude and function well with group-oriented tasks. Experience with a document control system such as a Vault is a plus. Great Work Environment Pleasant, clean, well-lighted environment Family-oriented First-of-the-month Friday company-supplied lunches Company Parties including Christmas Party, Santa for the Kids, Summer Family Picnic, and more Local charity events Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
$74.6k-138.5k yearly 1d ago
Manufacturing Engineer Intern
Stevens Industries 3.3
Teutopolis, IL jobs
We're looking for a hands-on, curious, and driven Manufacturing Engineer Intern to join our team! This internship offers a unique opportunity to gain real-world experience by working both in an office setting and directly on the production floor. You'll play a keyrole in identifying inefficiencies, improving processes, and supporting continuous improvement initiatives that drive productivity and quality. What You'll Do: Collaborate with engineers and production staff to analyze current manufacturing processes Identify opportunities for process improvements and assist in implementing solutions Collect and analyze data to support efficiency and workflow enhancements Assist in the design and layout of workstations, tools, and equipment Document standard operating procedures and best practices Support ongoing lean manufacturing and continuous improvement projects Participate in cross-functional team meetings and contribute ideas Requirements Currently pursuing a degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or a related field Strong analytical and problem-solving skills Comfortable working in both office and production environments Excellent communication and teamwork abilities Proficiency in Microsoft Office; experience with CAD or data analysis tools is a plus Eagerness to learn and contribute in a fast-paced, hands-on environment Why Join Us? Gain valuable, real-world engineering experience Work on meaningful projects that make a tangible impact Learn from experienced professionals in both engineering and manufacturing Be part of a supportive and innovative team BENEFITS: • 1 hour of PTO per 40 hours worked • On-Demand Pay - Access your earned pay prior to payday • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour
$16-18 hourly 1d ago
Manufacturing Engineer Intern - $16 - 18/hr
Stevens Industries 3.3
Teutopolis, IL jobs
We're looking for a hands-on, curious, and driven Manufacturing Engineer Intern to join our team! This internship offers a unique opportunity to gain real-world experience by working both in an office setting and directly on the production floor. You'll play a keyrole in identifying inefficiencies, improving processes, and supporting continuous improvement initiatives that drive productivity and quality. What You'll Do: Collaborate with engineers and production staff to analyze current manufacturing processes Identify opportunities for process improvements and assist in implementing solutions Collect and analyze data to support efficiency and workflow enhancements Assist in the design and layout of workstations, tools, and equipment Document standard operating procedures and best practices Support ongoing lean manufacturing and continuous improvement projects Participate in cross-functional team meetings and contribute ideas Requirements Currently pursuing a degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or a related field Strong analytical and problem-solving skills Comfortable working in both office and production environments Excellent communication and teamwork abilities Proficiency in Microsoft Office; experience with CAD or data analysis tools is a plus Eagerness to learn and contribute in a fast-paced, hands-on environment Why Join Us? Gain valuable, real-world engineering experience Work on meaningful projects that make a tangible impact Learn from experienced professionals in both engineering and manufacturing Be part of a supportive and innovative team BENEFITS: • 1 hour of PTO per 40 hours worked • On-Demand Pay - Access your earned pay prior to payday • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour
$16-18 hourly 1d ago
Second Shift Manufacturing Supervisor
Quad 4.4
Spartanburg, SC jobs
As a global marketing experience company, Quad's goal is to help our clients win every day. We use our data-driven integrated marketing and manufacturing platform to streamline solutions for our clients, reduce friction and enhance their marketing spend effectiveness. We've built a rich legacy by believing in our people, allowing them to act like owners and to take charge of their own success. Whether an operator, sales rep, a graphic artist or a clinician, we're all driven to perform at our best- for ourselves and our clients. At our core, we're a company that believes we can always create a better way. Quad is seeking a Manufacturing Supervisor to work the Second shift at our Spartanburg, SC, Packaging plant. The hours for the role are from 2 pm to 10 pm, Monday-Friday. Our 82,000 sq. ft. facility in Spartanburg, SC, is a state-of-the-art packaging plant that serves a diverse range of clients, including medical, pharmaceutical, and well-known liquor and tobacco brands. We offer Sheetfed offset and narrow-web flexo, along with die cutting and custom folding/gluing, all supported by advanced inline quality control systems. Headquartered in Wisconsin, Quad is a global marketing experience company that helps brands connect with consumers through state-of-the-art technology and data-driven intelligence. With approximately 12,000 employees in 14 countries, we serve around 2,500 clients, including industry-leading blue-chip companies that serve both business and consumers in multiple industry verticals, with a particular focus on commerce, including retail, consumer packaged goods, and direct-to-consumer; financial services; and health. Quad is ranked among the largest agency companies in the U.S. by Ad Age, buoyed by its full-service media agency, Rise, and creative agency, Betty. Quad is also one of the largest commercial printers in North America, according to Printing Impressions. The Manufacturing Supervisor is responsible for overseeing and coordinating the daily operations of the manufacturing floor. This role ensures that schedules are met, quality standards are maintained, and safety protocols are followed. The Manufacturing Supervisor provides guidance, training, and support to achieve optimal efficiency and productivity. This position requires strong leadership skills, attention to detail, and the ability to troubleshoot and resolve issues promptly to maintain a smooth and efficient production process. Key Responsibilities: Oversee the daily activities of the manufacturing floor to ensure production schedules are met. Monitor manufacturing processes to ensure products meet quality standards and specifications. Enforce safety protocols and procedures to maintain a safe working environment. Lead, train, and mentor a team of manufacturing workers, fostering a collaborative and productive work environment. Identify and resolve issues promptly to minimize downtime and maintain efficiency. Manage resources, including materials and equipment, to optimize production output. Maintain accurate records and prepare reports on manufacturing metrics, quality, and safety. Implement and promote continuous improvement initiatives to enhance productivity and efficiency. Coordinate with other departments, such as maintenance, to ensure smooth operations. Knowledge, Skills & Abilities: 3+ years of previous supervisory experience in a manufacturing environment. Prior print experience with a focus on die-cutting and gluing experience preferred. Experience working in a manufacturing environment, with a strong understanding of production processes and equipment. In-depth understanding of manufacturing processes, equipment, and technology. Familiarity with workplace safety regulations and compliance standards. Understanding of Lean Manufacturing principles and methodologies. Excellent verbal and written communication skills. Effective problem-solving and troubleshooting abilities. Strong organizational and time management skills. Ability to make informed decisions quickly and effectively. High level of attention to detail to ensure quality and accuracy. Ability to adapt to changing production demands and priorities. Strong interpersonal skills to build positive relationships with team members and other departments. The ability to work over-time when needed. We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more. Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging - a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories. Drug-Free Workplace
$57k-72k yearly est. Auto-Apply 12h ago
Engineering Team Lead
Jubilant Hollisterstier CMO 4.0
Spokane, WA jobs
Engineering Line Lead Jubilant HollisterStier LLC, a well-established member of the business community in Spokane, Washington, provides a complete range of services to support the pharmaceutical and biopharmaceutical industries. The Allergy business is a worldwide leader in the manufacture of allergenic extracts, targeted primarily at treating allergies and asthma. Jubilant HollisterStier is also a nationally recognized contract manufacturer of sterile injectable vials, and lyophilized products. Jubilant HollisterStier is a proud member of the Jubilant Pharma family. Our Promise: Caring, Sharing, Growing We will, with the utmost care for the environment and society, continue to enhance value for our customers and stakeholders by providing innovative products and economically efficient solutions' through growth, cost effectiveness and wise investment of resources. Job Description: The CMO Engineering Line Lead position provides leadership, manufacturing support and coordination of the engineering department for the CMO line specific projects. This position ensures that contract projects, equipment functionality, compliance support, and capital expenditures are executed per Jubilant HollisterStier management initiatives, compliance guidelines, the JHS project management system, and the capital budget schedule. It is the responsibility of this position to ensure line specific compliance of the CMO equipment and team with state, local, and federal regulations. This position ensures operations and projects are carried out under adherence to GEPs and cGMPs. Responsibilities: Provide technical oversight and leadership to the engineering team roles responsible for their area of responsibilty within the CMO Business Unit. Drive technical improvements and internal/external responses to equipment and facility observations. Management of the assigned capital project schedules and budgets. Assign and oversee engineering projects including internal capital, compliance, and contract manufacturing. Coordinate and supervise engineering resources to ensure adequate and appropriate staffing for current and upcoming projects. Ensure designated area, equipment,and engineering infrastructures are compliant to local, state, federal, and international regulatory agencies. Execute high level projects from conception, consistent with upper management objectives for business growth. Manage and execute facility and equipment updates to meet company growth and economic objectives. Support client audits and technical visits. Effectively communicate project status, constraints and current or potential issues to upper management. Qualifications: BS in: Mechanical, Chemical, Electrical, Manufacturing, or similar engineering discipline 3+ years of related experience Pharmaceutical experience FDA regulated Industry experience Facility engineering experience Office (Word, PowerPoint, Excel, AutoCAD & SAP) Ability to work independently without routine instructions. Preferred Qualifications: Supervisory experience Shift: Day Compensation: The salary range for this position is $103,050 - $151,100 depending on experience. Midpoint and above is reserved for employees who have longevity with Jubilant HollisterStier and consistently exhibits outstanding performance over a period of time in the role Benefits: Medical, Dental, Vision, Flexible Spending and Health Savings Accounts Life, AD&D, Short and Long Term Disability 401(k) with company match Generous paid time off plan Employee Assistance Program Optional Benefits: Voluntary Life and AD&D for employee & family Supplemental Medical coverage (Critical Illness, Hospital Indemnity and Accident coverages) Pet Insurance ID Theft Protection Perk Spot Discount Program Jubilant HollisterStier is a great place to grow! If you're up for a rewarding challenge, we invite you to take the first step and apply today! *************************************************** *Please click on the Spokane, WA link* Jubilant HollisterStier is an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to their protected veteran status and will not be discriminated against on the basis of disability. If you require assistance applying for a position, please contact our HR Department at: ******************************
$103.1k-151.1k yearly 5d ago
Staff AI Engineer
Ashley Furniture Industries 4.1
Tampa, FL jobs
Join The #1 Furniture Company-Join The #1 Furniture Brand Ashley Furniture Industries, Inc. is the largest manufacturer of furniture in the world. Established in 1945, Ashley offers one of the industry's broadest product assortments to retail partners in 123 countries. Position Summary Ashley seeks a Staff AI Engineer to join Ashley Furniture and lead the technical architecture of our agentic AI platform while remaining hands-on with critical implementations. You'll define how we build autonomous AI agent systems that operate across our supply chain, manufacturing, and retail domains, setting technical standards that enable the team to ship production features rapidly and reliably. Key Responsibilities Technical Leadership & Architecture: Define the technical strategy for our agentic AI platform. Design system architectures that support complex multi-agent workflows, real-time decision making, and seamless integration across supply chain and commerce systems. Make key technology choices that impact company trajectory. Cross-Domain System Design: Architect AI systems that span Ashley Furniture's supply chain optimization, manufacturing intelligence, and retail experiences. Design unified data models and APIs that enable agents to reason across inventory, demand forecasting, production scheduling, and customer behavior. Advanced Agent Development: Build sophisticated AI agents that handle complex, multi-step reasoning across business domains. Implement advanced patterns for tool use, multi-agent coordination, and human-in-the-loop controls for enterprise deployments. Platform & Infrastructure: Lead development of our core AI platform that enables rapid deployment of new agentic workflows. Build robust foundations for prompt management, model evaluation, observability, and cost optimization across multiple LLM providers. Team & Process Leadership: Mentor engineers and establish engineering practices that enable high-velocity feature development. Lead technical discussions, architecture reviews, and cross-functional collaboration with product and business teams. Strategic Technical Decisions: Evaluate and integrate emerging AI technologies, frameworks, and methodologies. Make build-vs-buy decisions for critical infrastructure components. Drive adoption of new capabilities like Model Context Protocol and advanced reasoning patterns. Qualifications Deep AI/ML systems expertise: Extensive experience building production AI systems at scale. Deep understanding of LLM architectures, fine-tuning, prompt engineering, and agent orchestration frameworks. Experience with both traditional ML and modern LLM-based systems. Systems architecture experience: You've designed and built complex distributed systems that handle high-throughput, low-latency requirements. Experience with microservices, event-driven architectures, and real-time data processing. Domain expertise in operations: Strong understanding of business operations and data workflows. You can translate complex business requirements into scalable technical solutions and understand the operational constraints that impact system design. Technical leadership track record: Experience leading technical teams, driving architectural decisions, and establishing engineering standards. You've successfully guided teams through technical challenges and scaling decisions. Full-stack capabilities: Comfortable working across the entire technology stack from infrastructure to user interfaces. Experience with Python and cloud platforms (AWS, Azure, GCP). Advanced LLM expertise: Deep experience with LLM architectures, fine-tuning, post-training, prompt engineering, and context engineering for optimal retrieval. Experience building production systems that leverage multiple LLM providers. Vision and multimodal systems: Extensive experience with vision models, computer vision, and multimodal AI systems. Experience building generative applications such as virtual furniture placement, room visualization, and spatial understanding systems that combine visual and textual understanding. Agent integration expertise: Experience with Model Context Protocol (MCP) implementations and agent-to-agent communication patterns. Understanding of multi-agent coordination and workflow orchestration. Nice To Have Deep understanding of multi-modal AI, tool use patterns, and agentic workflow design Background in real-time optimization, scheduling, or recommendation systems Experience building AI infrastructure platforms used by other engineers Apply today and find your home at Ashley! Benefits We Offer Health, Dental, Vision, Employee Assistance Program Paid Vacation, Holidays, and Your Birthday off Generous Employee Discount on home furnishings Professional Development Opportunities Ashley Wellness Centers (location specific) and Medical Tourism Telehealth 401(k) and Profit Sharing Life Insurance Our Core Values Honesty & Integrity Passion, Drive, Discipline Continuous Improvement/Operational Excellence Dirty Fingernail Growth Focused To learn more about Ashley Furniture, our community engagement programs, environmental stewardship, and our core values, please visit our Corporate Social Responsibility information page: Corporate Social Responsibility We are an equal opportunity employer and provide a drug-free working environment. While Ashley appreciates the interest of all candidates only those meeting specific position requirements may be contacted. Principals Only.
$72k-101k yearly est. 5d ago
Senior Project Engineer
Phillips Infrastructure 3.7
Fort Myers, FL jobs
The Senior Project Engineer is responsible for planning, developing, coordinating, and managing engineering activities for multiple construction projects. This role provides technical expertise and project oversight, ensuring that all administrative and engineering aspects align with project goals. Working closely with internal teams and external partners, the Senior Project Engineer plays a critical role in optimizing processes, ensuring regulatory compliance, and maintaining alignment between project plans and on-site execution. This position supports multiple concurrent projects while gradually taking on leadership responsibilities, with the potential for career advancement into a management role. Essential Duties and Responsibilities: · Participate in and support up to 10 concurrent projects. · Collaborate with internal teams and external partners to ensure project success. · Provide regular updates to clients on project status, timelines, and key developments. · Develop, implement, and optimize processes to improve efficiency and productivity. · Lead and mentor team members, facilitating knowledge transfer and professional growth. · Work closely with field employees to ensure alignment between project plans and on-site execution. · Monitor the work of the engineering firm, providing direction and ensuring alignment with project goals and timelines. · Assist in budgeting, scheduling, and resource allocation. · Ensure compliance with industry regulations, company policies, and safety standards. · Coordinate material procurement, supplier relationships, and quality control efforts. · Analyze data and generate reports to support informed decision-making. · Gradually take on more leadership responsibilities with the potential to transition into a management role. Requirements: · Strong problem-solving skills and the ability to work independently. · Experience working on multiple projects simultaneously. · Excellent communication, interpersonal, and leadership skills. · Ability to learn quickly and adapt to evolving responsibilities. · Strong organizational and time-management skills. Education and Experience: · Bachelor's degree in Engineering, Construction Management, or a related field. · 2-3 years of experience in construction management. · Experience with advanced reporting and analytics tools (Power BI, SQL, Python, etc.) is a plus. · Previous leadership or mentorship experience is a plus. Candidates who accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam ensures that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.
$95k-116k yearly est. 2d ago
Senior Automation & Controls Engineer - Chemical Manufacturing
Ecolab 4.7
Joliet, IL jobs
Join the Ecolab team in the Joliet, IL chemical manufacturing plant as the Senior Automation & Controls Engineer. As a member of our team, you will help support and transform the chemical manufacturing culture to an efficient and effective workplace, implementing processes and tools using Total Production Management (TPM) strategies. What You Will Do: Provide engineering / technical support to manufacturing and maintenance operations in the troubleshooting, rebuilding and repair of electrical equipment and automated systems using digital multimeters and other electrical tools. Provide engineering background for continuous improvement of manufacturing operations through the design, selection and installation of new equipment and systems as well as the improvement of existing equipment. Provide for the continuous improvement of processes, procedures, and equipment. Assures maximum reliability of equipment, processes and procedures. Incorporates PLC/HMI programming enhancements to the production process that provide reliable production operation, reduce electrical energy cost, reduced cycle time and increase the tons per hour productivity. Troubleshoots networking and server issues. Create and maintain current documentation of equipment and systems. Build team responsibilities among various departments in order to facilitate project goals of Safety, Production, Equipment, Quality and Customer Satisfaction. Participate as a team member of the production process team, utilizing LEAN concepts of improving productivity through efficiency. Develop the architecture, PLC logic programming and HMI operator interface for production equipment. Facilitate projects including operational specifications, sequence of operation, schematic drawings, PLC logic programming, installation drawings, onsite commissioning and validation of the system design. Design and specify machine and gauge control systems; HMI systems; and data collection systems, according to company design standard Provide training to reliability technicians, including writing and developing standard operating procedures Support capital projects with electrical, instrumentation, and control system needs. Minimum Qualifications: Bachelor's degree in electrical engineering 5 years of experience in an industrial maintenance environment 5 years of experience PLC and HMI troubleshooting and programming experience No immigration sponsorship available for this position Preferred Qualifications: Rockwell Automation PLC experience with RS Logix and Control Logix programming Rockwell Automation FactoryTalk & AssetCentre experience Wonderware InBatch/InTouch experience Fanuc or Motoman robot experience Networking experience Strong troubleshooting skillet in a deadline-driven environment Familiar with ARC Flash safety requirements and NFPA 70E Annual or Hourly Compensation Range The pay range for this position is $98,600.00 - $148,000.00. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. Click here to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: - Undergo additional background screens and/or drug/alcohol testing for customer credentialing. - Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging At Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.
$98.6k-148k yearly 14d ago
Senior Project Engineer
Phillips Infrastructure 3.7
Moore Haven, FL jobs
The Senior Project Engineer is responsible for planning, developing, coordinating, and managing engineering activities for multiple construction projects. This role provides technical expertise and project oversight, ensuring that all administrative and engineering aspects align with project goals. Working closely with internal teams and external partners, the Senior Project Engineer plays a critical role in optimizing processes, ensuring regulatory compliance, and maintaining alignment between project plans and on-site execution. This position supports multiple concurrent projects while gradually taking on leadership responsibilities, with the potential for career advancement into a management role. Essential Duties and Responsibilities: · Participate in and support up to 10 concurrent projects. · Collaborate with internal teams and external partners to ensure project success. · Provide regular updates to clients on project status, timelines, and key developments. · Develop, implement, and optimize processes to improve efficiency and productivity. · Lead and mentor team members, facilitating knowledge transfer and professional growth. · Work closely with field employees to ensure alignment between project plans and on-site execution. · Monitor the work of the engineering firm, providing direction and ensuring alignment with project goals and timelines. · Assist in budgeting, scheduling, and resource allocation. · Ensure compliance with industry regulations, company policies, and safety standards. · Coordinate material procurement, supplier relationships, and quality control efforts. · Analyze data and generate reports to support informed decision-making. · Gradually take on more leadership responsibilities with the potential to transition into a management role. Requirements: · Strong problem-solving skills and the ability to work independently. · Experience working on multiple projects simultaneously. · Excellent communication, interpersonal, and leadership skills. · Ability to learn quickly and adapt to evolving responsibilities. · Strong organizational and time-management skills. Education and Experience: · Bachelor's degree in Engineering, Construction Management, or a related field. · 2-3 years of experience in construction management. · Experience with advanced reporting and analytics tools (Power BI, SQL, Python, etc.) is a plus. · Previous leadership or mentorship experience is a plus. Candidates who accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam ensures that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.
$95k-116k yearly est. 5d ago
Project Engineer
Phillips Infrastructure 3.7
Fort Myers, FL jobs
The Project Engineer in this role is responsible for planning, developing, coordinating, and managing onsite construction engineering activities for large, extensive projects in the heavy civil/power construction industry, encompassing grading, clearing, and site development. Essential Duties and Responsibilities: Track project quantities Generate project billing. Initiate and negotiate change orders. Generate CAD drawings and present solutions to owners for design problems that arise in the field. Review plan changes Assist with work plans. Assist with project schedules. Manage submittal data. Manage material purchase orders. Manage and negotiate subcontracts. Assist in division field personnel management. Assist field personnel in any capacity to handle any problems that may arise. Work with Project Superintendents, Foreman, and Crews to perform work more effectively. Attend pre-construction meetings. Requirements: Must be willing to relocate. Strong organizational skills Strong work ethic Able to multitask and work independently under pressure and tight deadlines. Education and Experience: Four-year engineering degree or equivalent technical training and related experience Excellent communication and interpersonal skills Demonstrated ability to manage a team of varied disciplines. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.
$56k-83k yearly est. 2d ago
Senior Project Engineer
Phillips Infrastructure 3.7
Arcadia, FL jobs
The Senior Project Engineer is responsible for planning, developing, coordinating, and managing onsite construction engineering activities for large heavy civil construction projects including mass earthwork, structural concrete, water management, and varying geo-technical components. This role provides technical expertise and project oversight, ensuring that all administrative and engineering aspects align with project goals. Working closely with internal teams and external partners, the Senior Project Engineer plays a critical role in optimizing processes, ensuring regulatory compliance, and maintaining alignment between project plans and on-site execution. This position supports large construction projects while gradually taking on leadership responsibilities, with the potential for career advancement into a management role. Essential Duties and Responsibilities: · Generate work plans, project schedules, submittal data, CAD drawings, etc. . · Track project quantities and generate project billing. Assist field personnel, Project Superintendents, Foreman, and Crews to coordinate work effectively and resolve problems. · Collaborate with internal teams and external partners to ensure project success. · Provide regular updates to clients on project status, timelines, and key developments. · Develop, implement, and optimize processes to improve efficiency and productivity. · Lead and mentor team members, facilitating knowledge transfer and professional growth. · Work closely with field employees to ensure alignment between project plans and on-site execution. · Monitor the work of the engineering consultants, providing direction and ensuring alignment with project goals and timelines. · Assist in budgeting, scheduling, and resource allocation. · Ensure compliance with industry regulations, company policies, quality control requirements and safety standards. · Coordinate material procurement, supplier relationships, and subcontractor coordination. · Analyze data and generate reports to support informed decision-making. · Gradually take on more leadership responsibilities with the potential to transition into a management role. Requirements: · Strong problem-solving skills and the ability to work independently. · Excellent communication, interpersonal, and leadership skills. · Ability to learn quickly and adapt to evolving responsibilities. · Strong organizational and time-management skills. Education and Experience: · Bachelor's degree in Engineering, Construction Management, or a related field. · 3-5 years of experience in construction management. · Experience with advanced reporting and analytics tools (Primavera, Power BI, SQL, Python, etc.) is a plus. · Previous leadership experience is a plus. · Experience with mass earthwork or water resource projects is a plus. Candidates who accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam ensures that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.
$95k-116k yearly est. 5d ago
Project Engineer
Holmberg Mechanical 3.8
Bellevue, WA jobs
Holmberg Mechanical is currently seeking a confident, passionate, highly motivated, and organized Project Engineer/Coordinator. The ideal candidate will have demonstrated organizational skills, the ability to multi-task, show a friendly & positive attitude, with a professional demeanor while maintaining a high level of productivity and integrity. The candidate's primary responsibility is to provide onsite project management. Working under the direction of a Project Manager, the successful candidate will work to implement key construction initiatives, ensure organization and consistency throughout the department and take ownership of all related issues and resolutions. Why Holmberg? Our culture! If you are looking for a fun place to thrive, Holmberg Mechanical is for you. We've made Puget Sound Business Journal's Best Places to Work List seven times, our CEO was named “Most Admired CEO” by the PSBJ in 2020, and we made Inc. Magazine's “5000 Fastest Growing Companies” List in 2019 and 2020. We have been in business since 1949 and are one of Washington state's oldest union plumbing companies. We are dedicated to helping our community with numerous events to support local non-profit organizations. We choose to pursue projects in our area that matter to us. If you would like to work with experts in the industry, on projects that matter to local people, in an inspiring environment, with room for growth and promotion, let's talk. Job Function/Responsibilities -Work as a team member with the project team and assist the Project Manager with management support. -Assist in the development and maintenance of construction project schedules, CPM schedule development, and standardization -Document control & organization, generate submittals & RFIs, prepare subcontracts, and manage subcontractors -Procurement of material, support of cost engineering, support of equipment buyouts, estimating support, support marketing & sales, and assist with project billings -Developing mutually successful relationships with clients Qualifications -Two years minimum as a Project Engineer/Assistant Project Manager. -Available to work flexible hours, an average of 40 hours per week standard, or as needed. -LOCAL CANDIDATES ONLY Skills and Requirements - Strong technical problem-solving ability. - Knowledge of Microsoft and Office Software. - Solid project management skills and methods. - Solid understanding of mechanical and plumbing systems. - BlueBeam Revu & Smartsheet a plus. Compensation is between $70,000 to $85,000 annually plus a competitive benefits package. Holmberg Mechanical is an Equal Opportunity Employer, offering qualified applicants' consideration for employment without regard to race, color, religion, sex, physical or mental disability, age, citizenship, pregnancy, genetic information, veteran status, gender identity, gender expression, sexual orientation, national origin, and any other protected status. Learn more about us at *******************
$70k-85k yearly 3d ago
Project Engineer
Phillips Infrastructure 3.7
Clewiston, FL jobs
The Project Engineer in this role is responsible for planning, developing, coordinating, and managing onsite construction engineering activities for large, extensive projects in the heavy civil/power construction industry, encompassing grading, clearing, and site development. Essential Duties and Responsibilities: Track project quantities Generate project billing. Initiate and negotiate change orders. Generate CAD drawings and present solutions to owners for design problems that arise in the field. Review plan changes Assist with work plans. Assist with project schedules. Manage submittal data. Manage material purchase orders. Manage and negotiate subcontracts. Assist in division field personnel management. Assist field personnel in any capacity to handle any problems that may arise. Work with Project Superintendents, Foreman, and Crews to perform work more effectively. Attend pre-construction meetings. Requirements: Must be willing to relocate. Strong organizational skills Strong work ethic Able to multitask and work independently under pressure and tight deadlines. Education and Experience: Four-year engineering degree or equivalent technical training and related experience Excellent communication and interpersonal skills Demonstrated ability to manage a team of varied disciplines. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.
$56k-83k yearly est. 3d ago
Engineering Technician - Manufacturing
Electric MacHinery Company LLC 3.8
Minneapolis, MN jobs
Electric Machinery Company, a division of WEG Electric Corp. Minneapolis, MN Manufacturing Technician (Union Environment) Department: Production The Manufacturing Technician positions work with team members to meet production goals. Performs activities related to Assembly, Lamination, or Winding in a manufacturing environment, while adhering to all safety standards. Requirements: High school diploma preferred but not required. Major Areas: Assembly; responsible for the assembly of motor, generators and drives. Lamination; responsible for assembling laminated subassemblies for stator winding, pole winding, exciter winding and rotor assembly. Winding; performs the setup, layout, winding, connecting, testing and troubleshooting of electrical AC or DC rotating equipment. Skills Matrix: Skills and advancement within the department is documented via the Skills Matrix. The skills matrix outlines the skills Assembly, Lamination, and Winding, an opportunity to increase your salary. Salary: 1st Shift; salary range $20.00 hourly to $24.00 hourly 2nd Shift salary range $20.00 hourly to $24.00 hourly (plus $2.00/hour differential) Will compensate with experience. Position is full-time. Pay Types: Voluntary weekend overtime; Saturday is paid at time and half; and Sundays are paid at double time! Job Type : Monday - Friday, 1st shift 7:00 a.m. - 3:30 p.m. Monday - Friday, 2nd shift 3:30 p.m. - 12:00 a.m. Full-time (Union) Benefits: Medical, Dental & Vision Insurance eligible your 1st day on the job 401K with Match 1st month following hire Quarterly Bonus Program payout potential Company paid Holidays (12) and Paid Birthday (1) (use anytime throughout the year) Paid Time Off (PTO) available immediately Company paid Short- & Long-Term Disability Company paid Life Insurance $6,000 annual Tuition Reimbursement program Company provided tools Company provided uniforms (laundered) Company reimbursement for Safety Shoes & Safety Glasses Secure, onsite free parking Physical Requirements: Routinely lifts and moves objects up to 20 lbs. Occasionally lifts and moves objects up to 50 lbs. Routinely ascends/descends ladders and stairs. Occasionally works at heights or on platforms. Occasionally positions self in various works spaces, including low, tight or confined spaces. Routinely remains in a stationary position, often standing or sitting for prolonged periods of time. Routinely uses repetitive motions including the wrists, hands or fingers to operate machinery or tools. Occasionally moves from one work station to another to accomplish tasks. Company cannot provide sponsorship for this position Please, no agencies
$20-24 hourly 14d ago
Manufacturing Engineering Technician (Montgomery, Illinois, United States, 60538)
Timken Co. (The 4.6
Montgomery, IL jobs
Your Career Begins at Timken If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Our employees make the world more productive by improving the efficiency and reliability of the machinery that keeps industry in motion. Together, We'll Keep the World Moving Forward. Not everyone knows what Timken makes. But you'll recognize what we make possible. Timken engineers solutions that keep the world moving by offering products and services to keep the world's equipment, machinery and vehicles in motion. Everywhere from NASCAR to NASA. Position Summary: We have an opportunity at our Montgomery, IL location for a Manufacturing Engineering Technician. This role specifies and develops operational sequences and manufacturing methods to ensure safe, efficient, and cost‑effective production. This role provides technical support to internal and external customers, supports CNC machines with programming, troubleshooting, and DNC library management, and collaborates across disciplines to optimize part manufacturability and process reliability What We Offer: * The annual salary range for this position is $50,000 - $65,000 based on experience. * Comprehensive benefits package, including medical, dental and vision coverage. * Benefits start on first day of employment. * 401(k) retirement savings plan with generous company match. * 10 paid holidays per year plus paid vacation. * Paid parental leave at one year of service. * Employee discounts on products and services. * Education expense reimbursement, eligible to apply at first day of employment. * Opportunities for professional development and career growth. Essential Responsibilities: * Partner with product engineers to develop part configurations that are manufacturable and cost‑effective. * Work with the quoting department to define and review process steps, tooling needs, and cycle times to produce accurate costing for new and existing parts. * Act as a liaison with suppliers to ensure reliability and cost effectiveness of outsourced processes. * Develop, review, and maintain routings and process documentation regularly to ensure process efficiency and effectiveness. * Collaborate with manufacturing engineering and production teams to develop and refine CNC programs for new parts using best-practice, efficient programming techniques. * Review and maintain existing CNC programs and DNC library management to ensure up-to-date, efficient program usage. * Troubleshoot CNC programs, setups, and tooling; support and train production personnel as needed. * Use CAD/CAM modeling software to perform analysis, generate layouts, and support programming and fixturing. * Develop or review process steps for sales order checklists to support accurate order processing and manufacturing readiness. * Develop, review, and troubleshoot manufacturing processes, setups, fixtures, and cycle times; provide training and production floor support. * Evaluate, recommend, and test machinery and equipment for process implementation and capability improvements. * Determine rework methods to salvage non-conforming parts and minimize scrap. * Perform analysis and layout designs using engineering design software; assist with design and fabrication of prototype parts Basic Qualifications: * High school diploma or equivalent. Preferred associate degree or technical diploma in Manufacturing Technology, Mechanical Engineering Technology, or related field. * At least 5 years of experience in machining processes, tooling, fixtures, and machining best practices. * Proven experience supporting CNC machining operations, including programming (CAM), troubleshooting, and DNC library management * Able to read and interpret engineering drawings and customer specifications; proficient with CAD and internal software systems. * Self-accountability to meet deadlines. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law.
$50k-65k yearly 60d+ ago
Manufacturing Engineering Technician
The Timken Company 4.6
Montgomery, IL jobs
Your Career Begins at Timken If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Our employees make the world more productive by improving the efficiency and reliability of the machinery that keeps industry in motion. Together, We'll Keep the World Moving Forward. Not everyone knows what Timken makes. But you'll recognize what we make possible. Timken engineers solutions that keep the world moving by offering products and services to keep the world's equipment, machinery and vehicles in motion. Everywhere from NASCAR to NASA. Position Summary: We have an opportunity at our Montgomery, IL location for a Manufacturing Engineering Technician. This role specifies and develops operational sequences and manufacturing methods to ensure safe, efficient, and cost‑effective production. This role provides technical support to internal and external customers, supports CNC machines with programming, troubleshooting, and DNC library management, and collaborates across disciplines to optimize part manufacturability and process reliability What We Offer: The annual salary range for this position is $50,000 - $65,000 based on experience. Comprehensive benefits package, including medical, dental and vision coverage. Benefits start on first day of employment. 401(k) retirement savings plan with generous company match. 10 paid holidays per year plus paid vacation. Paid parental leave at one year of service. Employee discounts on products and services. Education expense reimbursement, eligible to apply at first day of employment. Opportunities for professional development and career growth. Essential Responsibilities: Partner with product engineers to develop part configurations that are manufacturable and cost‑effective. Work with the quoting department to define and review process steps, tooling needs, and cycle times to produce accurate costing for new and existing parts. Act as a liaison with suppliers to ensure reliability and cost effectiveness of outsourced processes. Develop, review, and maintain routings and process documentation regularly to ensure process efficiency and effectiveness. Collaborate with manufacturing engineering and production teams to develop and refine CNC programs for new parts using best-practice, efficient programming techniques. Review and maintain existing CNC programs and DNC library management to ensure up-to-date, efficient program usage. Troubleshoot CNC programs, setups, and tooling; support and train production personnel as needed. Use CAD/CAM modeling software to perform analysis, generate layouts, and support programming and fixturing. Develop or review process steps for sales order checklists to support accurate order processing and manufacturing readiness. Develop, review, and troubleshoot manufacturing processes, setups, fixtures, and cycle times; provide training and production floor support. Evaluate, recommend, and test machinery and equipment for process implementation and capability improvements. Determine rework methods to salvage non-conforming parts and minimize scrap. Perform analysis and layout designs using engineering design software; assist with design and fabrication of prototype parts Basic Qualifications: High school diploma or equivalent. Preferred associate degree or technical diploma in Manufacturing Technology, Mechanical Engineering Technology, or related field. At least 5 years of experience in machining processes, tooling, fixtures, and machining best practices. Proven experience supporting CNC machining operations, including programming (CAM), troubleshooting, and DNC library management Able to read and interpret engineering drawings and customer specifications; proficient with CAD and internal software systems. Self-accountability to meet deadlines. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law.
$50k-65k yearly 60d+ ago
Manufacturing Engineering Toolmaker & Set-up Technician
Knight's Armament 4.2
Titusville, FL jobs
JOB TITLE: Manufacturing Engineering Toolmaker & Set-Up Technician DEPARTMENT: Manufacturing Engineering REPORTS TO: Manufacturing Engineer Manager PURPOSE OF POSITION: This position is responsible for performing skilled machinist duties under limited supervision. Work with mills and/or lathes, and operate CNC machines. Fabricate tooling and fixturing for production. Performs related work in assessing quality standards and ensuring the product meets exacting specifications and standards. EDUCATION & EXPERIENCE: * Three (3) years minimum experience with Computer Numerically Controlled (CNC) machines (mills and/or lathes). Knowledge of tooling, speeds and feeds, offsets and minor program changes. Ability to program using G and M codes.. * Demonstrated ability to comprehend blueprints and familiarity with GD&T. * Familiarity with Solidworks a plus DESCRIPTION OF JOB DUTIES: * Set up CNC machines for production runs. * Check all dimensions and visual aspects of parts as instructed. * Ensure first article passes QA Department approval. * Follow directions accurately and consistently. * Performs machinist work involving fabrication of specialized parts. * Maintains strict tolerance requirements in the set up of production parts. * Records cycle times and tool life for record-keeping purposes. * Contacts Manufacturing Engineering personnel when raw product, events or finished products are not conforming to required standards. * Fabricate production tooling and fixturing as designed. * Confers with colleagues to rectify problems, such as damages, shortages, and nonconformance to specifications. * Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. * Assists in machining adjustments and operational improvements. * Perform other duties as assigned by supervisory or management personnel. PHYSICAL REQUIREMENTS: * Seeing: Required * Speaking: Required * Hearing: Required * Standing: Frequently * Walking: Often * Sitting: Occasionally * Lifting: Often, up to 50-pounds * Carrying: Occasionally, up to 50-pounds * Pushing: Occasionally * Pulling: Occasionally, up to 60-pounds * Climbing: Rarely * Balancing: Rarely * Bending: Frequently * Twisting: Occasionally * Reaching: Frequently * Grasping/Handling: Frequently, for dexterity, fine finger handling * Stooping/Crouching: Occasionally * Kneeling: Occasionally * Crawling: Rarely Environmental Conditions: Inside: 90% Outside: 10% Temperature Conditions: Controlled -in Excess of 70-degrees - occasionally Knight Enterprises Management, L.L.C. is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, creed, sex, national origin, age, protected veteran status, disability status, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, or any other protected factor by country, regional or local law. Knight's policies regarding recruitment, hiring, compensation, benefits, promotions, transfers, training and all other personnel matters are free from discriminatory practices and are based on merit, qualifications, and abilities. To view the U.S. Department of Labor's (DOL) Equal Employment Opportunity is the Law poster, please go to the following link: ****************************************************************
$37k-49k yearly est. 60d+ ago
Optical Engineer
Nlight 4.1
Camas, WA jobs
Who We Are At nLIGHT, we are constantly on the cutting-edge of laser technology in a massively growing market. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few. Our lasers are changing not only the way things are made, but also changing the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR). Summary We are seeking a hands-on Optical Engineer with experience supporting complex opto-mechanical or electro-optical systems. This role focuses on high-power fiber laser systems from development through production. The ideal candidate is highly motivated and will contribute to the design, development, testing, and delivery of our laser products. Key Responsibilities: * Contribute to a cross-functional team pursuing the development of novel fiber laser and component designs * Apply theoretical and experimental understanding of lasers, fiber optics, and opto-mechanical design to the development of high-power fiber lasers and components * Design, develop, and test fiber laser systems and critical components, including fiber amplifiers * Consistently and effectively report out on design and testing to core and cross-functional teams Skills & Qualifications: * BS or MS in Optical Engineering, Physics, or related field. MS is preferred. * Hands on experience with development of fiber and/or solid-state lasers and amplifiers, optics, and/or opto-mechanical systems * Strong laboratory skills including optical testing and characterization of high-power lasers or complex optical sub-assemblies * Solid analytical and problem-solving skills, including problem identification, data analysis, action planning, and execution * Strong theoretical and experimental understanding of lasers and their associated optics * Fiber laser system design and modeling, including practical considerations (manufacturability, serviceability, and reliability) is desired * Good communication and collaboration skills Preferred Skills: * Hands on experience with high-power lasers for defense or aerospace applications. * Familiarity with SolidWorks, ERP systems, and data analysis tools (e.g., Excel, SQL). * Working knowledge of reliability engineering, laser safety standards, and test automation. nLIGHT is proud to offer comprehensive COMPENSATION AND BENEFITS: Starting pay depends on qualifications: * Optical Engineer I: $85,000 - $95,000 * Optical Engineer II: $90,000 - $110,000 Other Compensation and Benefits * Target Cash Bonus of 5% of earned wages * Eligible for Restricted Stock Unit grants * 4 weeks of Paid Time Off per year * 10 paid Holidays * Eligible for health benefits on the 1st day of the month after your start date * Medical, Dental and Vision Benefits, including prescription and orthodontia with employee-paid premiums as low as $40.00 per pay period * Flexible Spending and Health Savings Accounts * Employee Stock Purchase Plan * 401(k) with company match and immediate vesting * Company paid Short-Term and Long-Term Disability, and Life & AD&D Insurance * Employee Assistance Program * Aflac Supplemental Insurance * Paid Bereavement Leave and Jury Duty * Tuition Assistance Program * Pet Insurance nLIGHT is subject to US Export Control regulations. To qualify for this position, you must be a US Person (that is, a US citizen, lawful permanent resident, or protected individual granted asylum or refugee status). Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or age. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Human Resources at ************** or *************. E-Verify Participation: nLIGHT participates in the E-Verify program. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. For more information, please review the following notices: * E-Verify Participation Poster * Right to Work Poster
$90k-110k yearly Auto-Apply 60d+ ago
Optical Engineer
Nlight 4.1
Camas, WA jobs
Description Who We Are At nLIGHT, we are constantly on the cutting-edge of laser technology in a massively growing market. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few. Our lasers are changing not only the way things are made, but also changing the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR).Summary We are seeking a hands-on Optical Engineer with experience supporting complex opto-mechanical or electro-optical systems. This role focuses on high-power fiber laser systems from development through production. The ideal candidate is highly motivated and will contribute to the design, development, testing, and delivery of our laser products.Key Responsibilities: Contribute to a cross-functional team pursuing the development of novel fiber laser and component designs Apply theoretical and experimental understanding of lasers, fiber optics, and opto-mechanical design to the development of high-power fiber lasers and components Design, develop, and test fiber laser systems and critical components, including fiber amplifiers Consistently and effectively report out on design and testing to core and cross-functional teams Skills & Qualifications: BS or MS in Optical Engineering, Physics, or related field. MS is preferred. Hands on experience with development of fiber and/or solid-state lasers and amplifiers, optics, and/or opto-mechanical systems Strong laboratory skills including optical testing and characterization of high-power lasers or complex optical sub-assemblies Solid analytical and problem-solving skills, including problem identification, data analysis, action planning, and execution Strong theoretical and experimental understanding of lasers and their associated optics Fiber laser system design and modeling, including practical considerations (manufacturability, serviceability, and reliability) is desired Good communication and collaboration skills Preferred Skills: Hands on experience with high-power lasers for defense or aerospace applications. Familiarity with SolidWorks, ERP systems, and data analysis tools (e.g., Excel, SQL). Working knowledge of reliability engineering, laser safety standards, and test automation. nLIGHT is proud to offer comprehensive COMPENSATION AND BENEFITS:Starting pay depends on qualifications: Optical Engineer I: $85,000 - $95,000 Optical Engineer II: $90,000 - $110,000 Other Compensation and Benefits Target Cash Bonus of 5% of earned wages Eligible for Restricted Stock Unit grants 4 weeks of Paid Time Off per year 10 paid Holidays Eligible for health benefits on the 1st day of the month after your start date Medical, Dental and Vision Benefits, including prescription and orthodontia with employee-paid premiums as low as $40.00 per pay period Flexible Spending and Health Savings Accounts Employee Stock Purchase Plan 401(k) with company match and immediate vesting Company paid Short-Term and Long-Term Disability, and Life & AD&D Insurance Employee Assistance Program Aflac Supplemental Insurance Paid Bereavement Leave and Jury Duty Tuition Assistance Program Pet Insurance nLIGHT is subject to US Export Control regulations. To qualify for this position, you must be a US Person (that is, a US citizen, lawful permanent resident, or protected individual granted asylum or refugee status). Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or age. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Human Resources at ************** or [email protected].E-Verify Participation: nLIGHT participates in the E-Verify program. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. For more information, please review the following notices: E-Verify Participation Poster Right to Work Poster
$90k-110k yearly Auto-Apply 60d+ ago