Elite Construction jobs in Valdosta, GA

The Electrical Engineer is responsible for all electronic control, radio communication, monitoring systems, and components including computer-related hardware and software. Benefits * Medical * Dental * Vision * Employer Paid & Voluntary Life Insurance * 401(k) Employer Match plus Annual Profit-Sharing Contributions * Paid Vacation, Sick Time & Holidays * Employer Paid Disability Plan * Employee Assistance Program * CalPortland is proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That's why we give you a wide range of benefits to choose from. • Medical, Dental, Vision o low-cost premiums even for family coverage • Company-paid life/AD&D insurance • Company-paid short-term disability • Paid sick/vacation/holiday • 401k/Company Funded Pension Program (program is dependent upon location and job type) • Employee Assistance Program (EAP) • Additional voluntary benefits Compensation $95,000 to $105,000 Depending on Experience Responsibilities Ability to assist and support the Plant Automation Engineer with the operation, maintenance, and programming of all plant instrument/analyzer systems including logic, analog and graphics, and all other technology that may be acquired Assist in the maintenance of instrument/analyzer/electrical systems, server-based high-level analyzer systems, and data historians such as OSI Pi, FLS ECS/QCX; assist CIS with the maintenance of corporate IT network Work with the plant's team to develop new control systems applications for projects Work with the energy team to identify improvements and participate in energy audits Assist with all aspects of capital projects including sizing of conductors and protective devices; load calculations for new and existing power systems in preparation for additions, changes, and capital projects interconnecting to the plant electrical system Identify worn and defective components as well as appropriate replacements; provide field inspections and supervision for electrical work on projects Support plant by diagnosing and correcting electrical problems Provide technical and safety training to Plant Electricians Complete design and drawing updates for replacement components Ability to apply corporate standards to designs and solutions suggested/implemented; use new technologies at the plant such as smart MCCs, including design, training of electricians, and updating documentation/diagnostic systems Replace or upgrade worn and depreciated components; design, change, and modify instrument/analyzer systems Create and submit capital proposals Education Bachelor of Science degree in Engineering Requirements/Qualifications Willing and able to work flexible hours as needed to maintain plant instrument/analyzer systems Must be a self-starter and be able to work independently Ability to maintain skills as necessary to keep pace with the ever-changing and improving technology for plant instrument/analyzer systems Strong communications and management skills - will work with, direct, assist and/or follow vendor services for troubleshooting and maintenance of all instrument/analyzer systems Troubleshooting skills and critical thinking are a must Ability to read and edit process flow drawings; the ability to read and create logic decision charts Ability to travel - required to travel to company facilities and other meeting locations on occasion Must be able to work cooperatively with plant and corporate personnel Preferred: Prior experience in computer automated control and instrumentation and/or cement production processes Knowledge of National Electrical Code (NEC) Understanding of instrument/analyzer system fundamentals Power distribution systems, relays, medium volt switchgear, instrumentation, PLC's, VFD's, etc. Conditions of Employment Successful candidate must submit to a post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA-regulated ongoing drug and alcohol testing. #LI-PW1

About the Role: The Field Mechanic with MYR Group you'll travel to project sites across the designated service area, supporting our field teams. You'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. This position requires significant travel in the state of Texas, (including overnight) to project locations, supporting teams to ensure successful operation of the equipment. At times, the Mechanic will be required to respond to emergencies outside regular work hours and work overtime including weekends and holidays. To support these travel requirements, a company vehicle, fuel card, and lodging will be provided. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. We are consistently recognized as one of the top five specialty electrical construction firms by Engineering News Record. Essential Functions This is considered an advance-level skilled or career level position Perform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations Perform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedules Frequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional manner May provide oversight for less experienced mechanics Perform routine and preventive maintenance, inspections, and repairs Identify mechanical problems either visually or with computer diagnostic equipment Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate Conduct safety inspections of equipment and prepare safety documentation Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements Other duties as assigned Regular and predictable attendance Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Must have three to five years of experience in general mobile heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules Physical Requirements/Working Conditions Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - $300 quarterly, $1,200 annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Tool/boot allowance ($250 per quarter). Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Workplace: #LI-Hybrid

SES Construction is seeking a highly motivated and experienced Project Manager/Superintendent to join our team in Fulton, Missouri. This position requires a construction professional with a strong foundation in field operations combined with excellent organizational and digital skills. You will be responsible for overseeing projects from initiation through completion, ensuring quality, safety, and adherence to schedule and budget. Key Responsibilities As a Project Manager/Superintendent, your responsibilities will blend on-site leadership with office-based management tasks: Project Oversight & Management: Serve as the primary point of contact and authority for assigned projects, ensuring they are completed on time and within budget. Direct and coordinate all on-site construction activities, including managing subcontractors, suppliers, and SES personnel. Develop, maintain, and enforce project schedules and work breakdown structures. Field Supervision & Quality Control: Maintain a safe, secure, and healthy work environment by enforcing site safety standards and company policies. Supervise and inspect all work to ensure it meets SES quality standards, project specifications, and local building codes. Resolve day-to-day issues on the job site quickly and effectively to prevent delays. Administrative & Computer Skills: Utilize construction management software (e.g., scheduling, project tracking, and documentation platforms) for daily reporting, progress tracking, and communication. Manage and process project documentation, including submittals, RFIs (Requests for Information), change orders, and daily logs, leveraging strong computer skills. Conduct regular project meetings with subcontractors, design teams, and clients. Financial & Resource Management: Assist in the preparation of project cost estimates and monitor project costs to identify and mitigate variances. Coordinate the delivery and storage of necessary materials, tools, and equipment. Qualifications Experience: Proven experience in commercial or residential construction, preferably in a combined Project Manager and Superintendent role. Ideal candidates will have practical experience and a comprehensive understanding of construction methods, techniques, and procedures. Technical Skills: Demonstrated proficiency with computer skills and construction management software (e.g., Bluebeam, Ebuilder, etc). Ability to read, interpret, and work from blueprints, specifications, and project documents. Knowledge: Strong understanding of current building codes, safety regulations (OSHA), and quality control standards. Soft Skills: Excellent organizational skills with the ability to manage multiple tasks and priorities effectively. Strong leadership, communication, and interpersonal skills, capable of effectively managing diverse teams and communicating with clients and vendors. Education: High School Diploma or GED required; a degree in Construction Management, Engineering, or a related field is a plus.

This role is not open for submissions from outside staffing agencies CLASS A DRIVER - Day Shift $1000 Sign on Bonus LOCATED at 3320 Maggie BLVD Orlando, FL 32811 What Brought You Here Pay $21-25/hour depending on experience Sign on Bonus $1000 Quarterly safety bonus opportunities Shift- Day Shift OT as needed Benefits starting DAY ONE! Earn additional pay based on individual and team performance with our Monthly Production Incentive Compensation Program! Who You Are: Someone with previous over the road experience. Familiar with pre and post trip inspections and using online log systems What You Will Be Doing: Successful candidates for the Delivery Driver role are motivated and eager to provide a high level of customer service. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Performs pre-trip and post-trip vehicle inspections. Complies with all required statutory, regulatory requirements, and company policy. Completes appropriate paperwork and forms, including but not limited to manifest, shipping and receiving documents. Maintain all required certifications required by DOT and OSHA and company safety programs. Loading and unloading of all finished goods and raw ingredients. Secure load during transit, including blocking and bracing. Driver must be able to utilize and/or learn the computerized system order to complete all transactions of shipments. Secure load during transit, including blocking and bracing. Drives truck with capacity of more than 3 tons, transporting materials to and from specified destinations. Distributes receipts for loads picked up. Occasionally collects payment for goods delivered and for delivery charges. Maintains telephone and/or radio contact with supervisor to receive delivery instructions. Assists Customers with the offloading process. Positions blocks and ties rope around items to secure cargo during transit. Communicates with customers, supervisors, and other employees effectively. Uses good judgment in making decisions, in emergency and routine situations. Skills You Bring: Current/Active CDL Class A License Minimum two years of experience after CDL school Must pass Driver's Testing Must pass DOT Physical (M.E.C.) / Drug Testing (DOT) Must be proficient in the English language Basic math to understand product weight and truck limits Reasoning ability; must be able to solve practical problems and follow instructions. Why Trulite: Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if you should incur a non-occupational illness or accident. We are pleased to offer a comprehensive wellness initiative that includes access to a progressive financial training program. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health. Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence. We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.

60% - Sales: The position partners with the Branch Manager and other Sales Representatives to increase volume of product sales. In addition, the assisting in upkeep of current customers, the Sales Representative will incorporate sales techniques to grow and maintain our customer base. Travel is primarily local during business day, although some out-of-area and overnight travel may be expected. 40% - Sales Data Upkeep: This position captures the accurate data, tracks sales, and monitors technology to ensure that all possible prospect needs are met. Essential Duties & Responsibilities: Sales: Qualifies incoming leads from sources Develops and increases sales revenue to meet assigned targets. Coordinates the rental, sale, and lease of new and existing products and services. Maintains a high level of contact with key accounts to insure long-term business relationships. Attends trade shows Keeps informed of new products, services, and other general information of interest to customers. Utilizes trade data lists, marketing lists, trade associations and visiting customer job sites to acquire new customers. Follows up with customers on a timely basis to provide the highest level of customer service. Meeting or exceeding designated sales targets for assigned territory. Troubleshoots quality control issues Sales data Upkeep: Utilize available technology to assist in the promotion and sales. Converts quotes into orders Maintains existing customer data and sales reports. Designs new reports as needed. Management of Satellite's internet stores Creates and modifies floorplans in company software Works with marketing to create sales sheets, sale flyers, and other marketing materials. Develops and conducts marketing programs for assigned territory Education and Experience Requirements: Bachelor's degree in Business Administration, or equivalent experience required Direct sales experience preferred Development of a prioritization system to ensure work is completed quickly and efficiently. Proficient in Navision, Salesforce.com, Microsoft Office. Required Competencies/Skills: Ability to work effectively on a team to enhance the growth of the company. Excellent organizational skills to coordinate all aspects of sales. Strong interpersonal skills in working with both customers, vendors, and sub-contractors. Proven ability to work accurately. Excellent problem solving and detail-oriented skills. Previous successful sales experience in a high transaction, B2B, repeat customer environment. Strong written and verbal communication Experience using the telephone as a prospecting and sales tool. Good time management and organizational skills Proficiency in MS Office Suite, CRM programs, and other computer software. Physical/Mental Demands: Position requires a high degree of concentration to manage frequent interruptions while meeting strict deadlines. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger handle or feel; and reach with hands and arms. The employee is also required to lift up to 35 pounds worth of marketing material for tradeshows and displays.

Quality Assurance Specialist - Trucks Business Unit Reports to: Corporate Quality Manager or Current Department Head The Quality Assurance Specialist position is responsible for ensuring quality of manufactured goods in multiple departments from vendor delivered products to final finished product by continually assessing process and recommending improvements. Additionally, this position assists in the analysis, documentation, and reporting of products information as well as assisting in analysis of necessary changes or repairs to product. Essential Duties and Responsibilities: Work closely with manufacturing, process, and quality teams to establish processes and procedures that will ensure consistently high quality. Conduct product testing specified by departments to ensure appropriate levels of quality is met and consistency between product is maintained. Identify and report product defects and potential issues: suggest and determine resolution of issues. Record and report issues to appropriate personal to ensure quality of product being distributed is accurate. Coordinate with departments and assist in implementation of improvement processes for continued growth. Run analysis reports to ensure metrics are being met; share findings with department heads; work with teams to implement solutions. Assist in any necessary repairs of product to ensure highest quality is met. Inspect finished product to specifications on blueprints. Prints may be located on an I-Pad, job order request forms, or in other formats as business unit grows and evolves. Inspect both incoming materials and finished goods in multiple departments to ensure highest standards of quality are met. Analyze, chart, and capture appropriate data and information for reporting and documentation purposes. Monitor, inspect and verify that work processes are being followed as specified. Train and teach team members the Satellite expectations for quality and customer expectations. Communicate and trouble shoot with team members regarding quality. Performs other duties as required. Supervisory Responsibilities: This position does not have supervisory responsibilities. Education and Experience Requirements: High school diploma or equivalent and 5 or more years of experience in a quality control environment. Training in general safety, electrostatic discharge awareness, foreign object damage awareness and quality system awareness. Must have a good to intermediate skill level with Microsoft Suite products and the ability to rapidly learn an operating software system. Demonstrated interpersonal and communication skills are required. Required Skills: Ability to work within a matrixed organization Analytical approach to data research and reporting Ability to read blueprints and specifications Sufficient knowledge in the use of rulers, calipers, gauges, micrometers, colors samples, and textures samples. Demonstrated ability to operate electronic inspection equipment and software. Ability to record and track data Good Communication skills and attention to detail Strong and steady work history. Exceptional attendance record Positive attitude. Physical/Mental Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position requires the use of typical office equipment such as computers, printers, copiers, and scanners. Occasional exposure to ship elements such as odor, noise, dust, heat, cold or chemicals. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. PM25

Job Title: Bill of Materials (BOM) Engineer Satellite Industries is a leading provider of Vacuum Tank trucks for industrial and municipal applications. We specialize in designing and manufacturing high-quality vehicles tailored to meet the unique needs of our customers. Our commitment to innovation and excellence drives us to continuously improve our products and services. Position Overview: We are seeking a detail-oriented and experienced Bill of Materials (BOM) Specialist to join our team at Satellite Industries. The BOM Specialist will be responsible for creating, optimizing, and maintaining accurate Bills of Materials for our product lines. This role involves working closely with cross-functional teams to ensure the efficiency and accuracy of our BOMs throughout the product lifecycle. Responsibilities: Develop and maintain Bills of Materials for our product lines using SAGE X3 ERP system, incorporating engineering specifications, design changes, and component requirements. Collaborate with Engineering teams to ensure BOMs accurately reflect product designs and configurations developed in CAD systems like SolidWorks and AutoCAD. Conduct regular audits of BOMs within SAGE X3 to identify discrepancies, errors, or inconsistencies, and implement corrective actions as needed. Support manufacturing operations by providing accurate BOM information from SAGE X3 for production planning and scheduling. Participate in cross-functional teams to address BOM-related issues within SAGE X3 and drive continuous improvement initiatives. Develop and maintain documentation related to BOMs within SAGE X3, including revision control and change management processes. Stay informed about industry standards and best practices related to BOM management and documentation within SAGE X3. Qualifications: Bachelor's degree in Engineering, Mechanical Engineering, Supply Chain Management, or related field is preferred Proven experience as a BOM Engineer or similar role in a manufacturing environment. Strong understanding of manufacturing processes and materials. Proficiency in using SAGE X3 or similar ERP systems for BOM management. Experience with the CAD systems SolidWorks and AutoCAD for interpreting engineering designs and specifications. Excellent attention to detail and organizational skills. Effective communication and interpersonal skills, with the ability to work collaboratively in a cross-functional team environment. Analytical mindset with problem-solving abilities. PM25

Essential Duties and Responsibilities: Stay updated on product developments, company policies, and industry best practices to provide informed support to customers. Serve as a contact for customer inquiries, issues, and order management from receipt through delivery, using various communication channels such as phone, email, fax, and online systems. Work to increase customer retention, identify cross-sell opportunities, and ensure overall customer satisfaction. Guide customers through the onboarding process, providing clarify and confidence with Satellite's products and processes. Process customer orders, create and modify purchase orders as needed, and ensure all logistics meet customer expectations. Track and monitor shipments, provide timely updates, and handle related communications to ensure smooth delivery. Maintain and update new and current customer records, including entering product quotes, assisting with webstore logins and updating information in the CRM system. Respond promptly to customer phone calls and emails, offering detailed product information and addressing questions about all product lines. Provide Sales operations support by assisting with product knowledge, lead times, product quotes, freight quotes, and resolving additional customer concerns. Process customer returns and credit memos efficiently, ensuring customer satisfaction throughout the resolution process. Log customer complaints and refer unresolved issues to the appropriate departments for further investigation and follow-up. Identify new revenue opportunities within existing customer accounts by leveraging communication, programs, and relationship-building activities. Cultivate strong business relationships with customers to support their ongoing needs and encourage growth within the existing client base. Identify inefficiencies in sales or order workflows and suggest improvements to enhance productivity and accuracy. Work with Sales to provide outstanding service and help meet deadlines. Assist with organizing and supporting sales initiatives such as managing follow-up on quotes and customer forecasts. Conduct market surveys by phone, analyze responses, and provide actionable conclusions or recommendations to support business growth. Supervisory Responsibilities: This position has no supervisory responsibilities. Education and Experience Requirements: Bachelor's degree and/or 2-5 years' experience in an internal customer service or inside sales role. Bilingual preferred but not required. Proficiency working in a Windows Office environment is required (Outlook, Excel, Word). Demonstrated interpersonal and communication skills are required. Experience in dealing with freight and logistics a plus. Demonstrated ability to think critically and efficiently, with a proven track record of providing effective recommendations or solutions to customer issues. Experience with database entry and maintenance is preferred but not required. Required Skills: A strong team player and leadership skills Excellent verbal and communication skills. Detail oriented. Customer/Client Focus. Ethical Conduct Time Management Project Management Multitasking Ability Personal Effectiveness/Credibility Excellent problem solving and organization skills Strong Interpersonal communications skills Demonstrated ability to work with a team. Flexibility Physical/Mental Demands: Position requires a high degree of concentration to manage frequent interruptions while meeting strict deadlines. This position requires the ability to perform duties using both typical office equipment such as computers, cell phones, and printers as well as the ability to communicate and perform tasks in a manufacturing/workshop environment. Must be able to perform physical and mental tasks associated within a manufacturing environment. Some travel required. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

About the Role: The Field Mechanic with MYR Group you'll travel to project sites across the designated service area, supporting our field teams. You'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. This position requires significant travel in the state of Texas, (including overnight) to project locations, supporting teams to ensure successful operation of the equipment. At times, the Mechanic will be required to respond to emergencies outside regular work hours and work overtime including weekends and holidays. To support these travel requirements, a company vehicle, fuel card, and lodging will be provided. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. We are consistently recognized as one of the top five specialty electrical construction firms by Engineering News Record. Essential Functions This is considered an advance-level skilled or career level position Perform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations Perform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedules Frequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional manner May provide oversight for less experienced mechanics Perform routine and preventive maintenance, inspections, and repairs Identify mechanical problems either visually or with computer diagnostic equipment Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate Conduct safety inspections of equipment and prepare safety documentation Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements Other duties as assigned Regular and predictable attendance Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Must have three to five years of experience in general mobile heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules Physical Requirements/Working Conditions Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - $300 quarterly, $1,200 annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Tool/boot allowance ($250 per quarter). Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Workplace: #LI-Hybrid

Who are we? Satellite Industries is the world's largest supplier of products to the portable sanitation industry, which includes portable restrooms, handwash units, consumables, deodorizers, vacuum trucks, vacuum technology, unit haulers, restroom, shower, and specialty trailers. Position Summary: The Production Technician 2: PVA works with materials to create a finished product for commercial or industrial use. Please note that this position has a typical schedule of Monday - Thursday, 7am to 6pm. Essential Duties and Responsibilities: Follow checklist for production start-up including: preparing machine for production, ensuring line is ready for production, turning on production equipment including but not limited to: compressor, vacuum, Mattpak, etc. Input work orders into appropriate printers to ensure accurate product marking. Affix product label rolls onto labeling machine. Initiate and monitor the operation of the automated bagging machine. Generate pallet tickets and record pallet information clearly and accurately. Conduct routine quality inspections to ensure product meets Satellite standards and identify and report any quality defects promptly. Count materials and report inventory discrepancies. Understanding work orders and bill of materials and ability to review and sign off on materials as required. Count and stack boxed product(s) in a neat and thorough manner. Move, stack, wrap, and replace pallets on robot. Bag packets into bags utilizing appropriate equipment/machinery. Perform accurate hand-counting of packets. Complete housekeeping duties regularly, following standard operating procedures and operational needs including but not limited to: sweeping, squeegeeing floors, cleaning process equipment, etc. Report waste and scrap materials in an accurate and timely manner. Verify that all materials match the specifications outlined in work orders. Labeling containers to meet customer specifications and federal regulations. Supervisory Responsibilities: No formal supervisory role. Education and Experience Requirements: This position prefers a high school diploma/GED. 3+ years of chemical production experience or the equivalent of training and experience. 3+ years manufacturing equipment operation experience. Required Skills: Proficient understanding of running manufacturing equipment. Intermediate manufacturing experience required. Ability to read, comprehend, and follow written instructions, chemical labels, safety regulations, and company policies, etc. Ability to maintain composure and effectiveness in a high-pressure and fast-paced environment. Technical Capacity. Ethical Conduct. Strong attention to detail. Ability to multi-task and be self-directed while remaining a team player. Excellent communication and teamwork skills. Independent Decision-Making skills. Physical/Mental Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk, read, count, and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, pushing, pulling, climbing ladders, and lifting throughout the day. The employee must frequently lift and/or move items over 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee must be able to use the personal protective equipment (PPE) that is determined to be necessary for this position including, but not limited to: respirators with a minimum requirement of N-95, safety-grade gloves, safety-grade eye protection, steel or composite toe shoes, etc. WORK ENVIRONMENT: While performing the duties of this job, the employee will be required to regularly work in a manufacturing environment working with multiple agents and reactants including, but not limited to: fumes, chemicals, airborne particles, moving mechanical parts etc. The noise level is typically moderate but hearing protection may be required. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

EHS Specialist - Reports to: Executive Vice President The Environmental Health and Safety (EHS) Specialist is responsible for ensuring workplace safety and environmental compliance. They develop, implement, and monitor health and safety programs that protect employees, the public, and the environment. Their role requires a thorough understanding of regulations, risk management, and emergency response. DUTIES AND RESPONSIBILITIES: Coordinate safety training programs to educate team on safety practices, emergency procedure, and regulatory requirements, to include new hire safety training, monthly safety training, forklift certification. Oversee safety committee to develop and update safety policies and procedures to ensure a safe working environment. Monitor and audit workplace practices to ensure compliance with local, state, and federal regulations. Conduct risk assessments to identify potential hazards and develop strategies to mitigate them. Conduct thorough investigations of accidents and incidents to determine root causes and work with HR to recommend corrective actions. Ensure the proper handling, storage, and disposal of hazardous materials to prevent contamination and exposure to hazards. Work with HR and management to coordinate emergency response efforts, including drills and real-time incident management. Maintain accurate documentation and maintenance of safety records including Material Safety Data (MDS) sheets. Act as primary point of contact with regulatory agencies, ensuring that all safety and environmental requirements are met. Collaborate with departments to integrate EHS considerations into operational processes and projects. Foster a culture of safety within the organization, encouraging proactive identification and resolution of safety issues. Maintains records of discharge or employee exposure to hazardous waste and/or pollutants, as required. Perform other duties as assigned. QUALIFICATIONS: Education: Bachelor's Degree in Environmental Science, Occupational Health and Safety, Engineering or a related field. Experience: Minimum of 3 years of experience in EHS, preferably in a manufacturing or industrial setting. Certifications: Certified Safety Professional (CSP) or equivalent are highly desirable. Knowledge: In-depth knowledge of EHS regulations, standards and best practices. Knowledge of Lean Manufacturing and 5S preferred. Shown ability to collaborate with other team members to accomplish tasks. REQUIRED SKILLS: Proficiency in MS Office Suite Proven quantitative and analytical abilities Project and time management Investigative and problem-solving skills Strong written and verbal communication Excellent problem-solving skills Strong Interpersonal communications skills Schedule flexibility to respond to emergency Ethical conduct Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. PM25

** This role is not open for submission from outside staffing agencies** Class B CDL Delivery Driver- Truck Loader/Unloader (Must load and unload truck before, during, and after driving routes daily) Located at AIG 33 Brent LN Pensacola Fl 32503 What Brought You Here Pay range $18- $23.50/hour depending on CDL class and experience Quarterly safety bonus opportunities Shift Days and Hours are Monday - Friday 7 AM until route is finished- Home daily with rare overnight trips possible Benefits Who You Are: A highly motivated and hard-working, reliable, and punctual Delivery Driver. Someone who is ambitious and hardworking and does not mind working in various weather conditions. This is a high-touch position that requires the Delivery Driver to assist with loading and unloading. What You Will Be Doing: Plans and completes an efficient delivery and pick-up route for the day. Loads and unloads truck of glass scheduled for delivery. Delivers glass to correct addresses, obtaining signatures and proof of receipt when necessary. Picks up glass along the scheduled route, including items to be returned, company orders, and other items as requested. Maintains basic records of truck mileage and deliveries made. Ensures that delivery vehicle receives basic service according to maintenance schedule; reports larger service needs and mechanical issues to supervisor. Assists in general warehouse duties when the delivery route is completed. Performs other related duties as assigned. Skills You Bring: CDL license with minimum 1 year of CDL driving experience after school. Must be able to pass a 7 yr MVR Must load and unload truck before, during, and after driving routes daily. Flatbed experience highly preferred Moffett experience highly preferred High School diploma or equivalent Must be able to lift 75 lbs. Must be able to work in hot or cold temperatures. Ability to use navigation tools such as onboard GPS, smartphone apps, and/or web-based or physical maps. Ability to plan delivery routes. Ability to maintain basic logs and records. Able to always remain professional and courteous. Why Trulite: Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if non-occupational injury occurs. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health. Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence. We are a drug-free workplace & pre-employment testing is required as a condition of employment for all positions. We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.

We are seeking an ASC Administrator to oversee the day-to-day administrative, financial, and operational functions of the surgery center, ensuring high-quality patient care, regulatory compliance, financial performance, and efficient facility management. You can get further details about the nature of this opening, and what is expected from applicants, by reading the below. This role provides strategic leadership, manages staffing, and works closely with physicians, governing boards, and internal and external stakeholders. xevrcyc The role is also responsible for ensuring excellent patient and staff experience as well as collaborating with the ASC Board of Governors, Medical Director, Director of Nursing and clinical staff to meet both clinical and business objectives.

A high number of candidates may make applications for this position, so make sure to send your CV and application through as soon as possible. Progressive Roofing - Roofing Estimator - Dallas, TX We are growing our team andlooking to find our next great estimator! Seeking a professional individual willing to jump in and work with our team and clients to help provide high qualityestimates. We work with a variety of different roofing systems and on commercial properties. As one of the nation's leading commercial roofing companies we see a wide range of projects throughout the year. For this position we need someone whois hands on and open to learning about commercial roofing or if you have experience in this space, open to continuing to perfect your skillset. Qualifications, Knowledge, and Skills: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily as outlined above. The requirements listed below are representative of the knowledge, skill, and/or ability required. Fluent knowledge of a variety of computer software applications such as Microsoft Outlook, Word, Excel, etc. Knowledge of office administrative procedures and knowledge of use and operation of standard office equipment. Ability to write highly effective reports, proposals, and business correspondence. Ability to effectively present information and respond to questions from employees, managers, and customers. Ability to define problems, collect data, establish facts, and draw valid conclusions. Willingness to travel and work with diverse client/customer base. Attend job walks and prepare take-off off by measuring, noting all variables of the roof site. This may require multiple visits to the actual project site. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requirements: Must be a team player and coachable Solid communication skills All candidates considered for this position must be fluent in Microsoft Office suite software. Key Responsibilities: Solid knowledge to analyze blueprints, specification interpretations, proposals, and other documentation to prepare material quotes, fabrication labor and construction labor requirement quotes, project pricing, and bid abstracts. Prepare itemized lists and summaries. Compute cost factors and prepare estimates used for management purposes such as planning, organizing, scheduling work, preparing bids, selecting vendors and/or subcontractors, and determining cost effectiveness. Consult with subcontractors, vendors, or other individuals to discuss and formulate estimates and resolve issues. Work with Project Managers, Purchasing, and Management as needed in the preparation and final evaluation of bids. Organize and manage a centralized cost estimating database and a formal process to support cost estimating to ensure historical data is utilized. Identify cost trends to assist management in cost reduction and processes of improvement. Complete understanding of manufacturer product warranties. Estimate prices on change orders on existing contracts. Attend pre-construction and bid/pre-qualification meetings. Ability to work from blueprints and drawing specifications. Maintain a positive rapport with property and facilities managers, general contractors, and manufacturers representatives. We Offer: Competitive wages Use of company vehicle and cell phone Great health insurance options Medical, dental and vision 401K Company paid short-term disability. xevrcyc Company-paid life Insurance Earned PTO, and more! Companyis an Equal Opportunity Employer PM23 PIe92dd 1

Are you a driven sales leader with experience in building materials, wholesale distribution, industrial supply, furniture sales, or other hands-on retail environments? Are you looking to improve lives and provide a vital service to our country? If so, Richards Building Supply wants you to lead our Maryland Heights, MO branch as our next Branch Manager! Why Join Us? At Richards Building Supply, we don't just sell building materials-we build relationships. As a Branch Manager, you'll have the autonomy to run your branch like your own business. From driving sales and mentoring your team to ensuring operational excellence, you'll be at the forefront of a fast-paced, results-oriented environment. What You'll Do: Grow Sales & Market Share - Develop and implement sales strategies to expand our customer base, collaborating with your Team contributing to increased sales and profitability. Lead & Develop Your Team - Hire, train, and mentor a high performing team that drives significant business growth while delivering exceptional customer service. Run Efficient Operations - Oversee inventory, cost control, budgeting, and compliance to ensure smooth branch performance. Engage with Customers - Build strong relationships with contractors and business owners offering programs designed to grow their business in all market conditions. Stay Competitive - Monitor industry trends, competitors, and market conditions to keep the branch ahead of the curve while staying connected with your customers on what is needed to keep them relevant in the market. Foster a Culture of Success - Maintain a professional, customer-focused environment aligned with our core values Other Essential Functions: A proven sales leader with experience in building materials, wholesale distribution, industrial supply, furniture sales, construction supply, or similar industries. A strong communicator who can connect with customers in a direct, practical way. A team builder with experience hiring, training, and developing employees. An operations-minded leader who understands cost control, inventory management, and compliance. Must be comfortable using business management software and Microsoft Office. A valid driver's license is required Experience: Bachelor's degree in business or related field OR equivalent experience. Experience in a B2B or contractor-facing environment is a big plus. Benefits: Competitive salary & performance-based bonus Benefits include sign-on bonus, medical, dental, 401k with company match, car allowance, gas card and other incentives. Relocation assistance available A strong company culture with family values and long-term career growth. Opportunity to directly impact our company's strategic direction through innovative decision-making. Collaborative environment where you can contribute your expertise and make a difference. An opportunity to make a real impact-lead, grow, and succeed with a company that values your expertise. Ready to take the next step? Apply today and let's build something great together! Engage with our Virtual Recruiting Assistant Christine here: Or Text: RBS to : (773) ###-#### Ref #ZR Maryland Heights Richards Building Supply is a wholesale building material distributor serving 15 states with over 65 locations! As a family owned, operated and focused company, Richards Building Supply has spent nearly 50 years building a thriving and profitable organization, as well as invaluable business relationships. Richards stocks a comprehensive line of products such as residential and commercial roofing, siding, windows, decking, soffit, doors, molding, rainware, cabinets, and more! Learn more about us here : Richards Building Supply believes in hiring military veterans at any level for any position. We know your service trained you in many of the areas we value, such as; leadership, teamwork, performance, integrity, and safety. If your experience matches our requirements, we want you to apply today. It's more than a job, it is your Career! Submit your resume today to join our exciting and growing family. Richards Building Supply is a wholesale building material distributor serving 12 states with over 60 locations! As a family owned, operated and focused company, Richards Building Supply has spent the last 40 years building a thriving and profitable organization, as well as invaluable business relationships. Richards stocks a comprehensive line of products such as residential and commercial roofing, siding, windows, decking, soffit, doors, molding, rainware, cabinets, and more! Learn more about us here: Richards Building Supply believes in hiring military veterans at any level for any position. We know your service trained you in many of the areas we value, such as; leadership, teamwork, performance, integrity, and safety. If your experience matches our requirements, we want you to apply today. It's more than a job, it is your Career! Submit your resume today to join our exciting and growing family.

Material Handler / Driver - Job Description The Material Handler / Driver partners with the warehouse, shipping, and supply chain departments to ensure timely and safe deliveries are made to intersite company locations and customers. This position also moves material and finished products in loading, shipping and manufacturing areas of the plant. DUTIES AND RESPONSIBILITIES: Material Handler: Pull product for order fulfillment and shipping preparation Work with operations team and independently to pick, pack, and ship orders Ensure shipping orders are correctly labeled and processed for quick and efficient delivery Transport products throughout the warehouse via power pallet and/or forklift Operate forklift and other company machinery as required for shipping requirements Review receipt of materials to ensure received materials accuracy Track parts movement between digital and physical locations Ensure packaged goods are loaded according to documentation and bills of lading Performs other duties as required Delivery Driver: Loading, transporting, and delivering items to customers or intersite locations in a safe, timely manner Obey traffic laws and be courteous to other drivers Reviewing orders before and after delivery to ensure that orders are complete Assisting with loading and unloading items from vehicles Keep truck clean, removing skids and other debris Communicate quickly, professional, and courteous with all team members and vendors Inside/outside position. Must be able to accomplish responsibilities in all types of weather Performs other duties as required QUALIFICATIONS: Warehouse and material handling experience Demonstrated experience in job duties or responsibilities In accordance with Satellite's Company Vehicle Program, this position requires a driving record check with not more than three points on their driving record, as outlined in the policy, in the past 3 years Driver must possess a minimum of two years' experience in commercial driving as well as ability to drive commercial vehicles safely while following company, state, federal, and local regulations CDL license preferred, but not required REQUIRED SKILLS: Ability to read, write, and understand shipping orders Safely operate a lift truck including daily inspection and reporting of lift truck issues Technical Capacity Ethical Conduct Strong attention to detail Ability to multi-task and be self-directed while remaining a team player Excellent communication skills Physical/Mental Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position will work primarily outdoors in an environment containing dirt, grease, and dust. Additionally, this position regularly drives vehicles for the company. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

Reports to: Inventory Manager The primary responsibility of the Inventory Coordinator is to assist in inventory management while working with sales, material handlers, workflow, and operations departments to ensure accuracy in counts and flow of product. Essential Duties and Responsibilities: · Work with material handlers and quality departments as needed to verify received items for correct amount and specifications · Perform planned and unplanned cycle counts; spot accuracy checks including quantity, lot, and location confirmations · Create cycle count and scrap entries as required to eliminate inventory · Assist in investigation and resolution of inventory issues or discrepancies, including researching inventory transactions · Report on counts and metrics, including KPI's as determined by management · Assist with returns from customers and returns to suppliers · Monitor the segregation and staging of nonconforming material until disposition · Assist with inventory control to help ensure appropriate amounts are in place and available for shipment · Understand how technology is used for scanning and putting away products (quantities and location accuracy) · Coordinate with team members to ensure order fulfillment accuracy · Coordinate with various departments on any potential production issues or needs · Maintain a safe and clean working environment · Comply with procedures, rules and regulations Supervisory Responsibilities: No formal supervisory role Education and Experience Requirements: · Minimum of 3 years' experience in an ERP centered, manufacture coordination role · Associates degree preferable but not required Required Skills: · Proficiency in MS Office Suite · Experience in ERP System · Demonstrated oral and written communication skills · Strong organizational and analytical skills · Ethical conduct · Ability to work in a team environment · Collaboration · Diversity and inclusion · Project and time management Physical/Mental Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position will work in both climate controlled and non-climate controlled environments which can contain dirt, grease, and dust, with exposure to outdoor environments. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. PM25

Job Description Elite Construction Company is seeking to hire a skilled and experienced carpenter- custom crate builder. Must have reliable transportation to work! Must be able to drive truck and pull trailer behind truck. Must be able to travel a few days a week out of town. This is an immediate job opening position! Position Summary: We are seeking a skilled and detail-oriented Carpenter-Crater to build custom wooden crates for shipping. This role is critical to ensuring our products arrive safely and securely to our customers. This is a unique position that requires EXPERIENCE USING TABLE SAWS, CHOP SAWS, BAND SAWS SANDERS, AND OTHER ELECTRIC OR AIR TOOLS. This work involves building patterns from sketches/drawings. Employees will also build frames for molds and make side boards, split boards, stop-offs for patterns and molds. Employees will also need to know general carpentry work. Employee will be responsible for cleaning his/her area after use and general housekeeping plus any other duties that the Supervisor may request. Carpenter/ Crate Builder Key Responsibilities: Read and interpret blueprints and packaging specifications to determine crate dimensions and construction requirements. Build custom wooden crates using hand and power tools, ensuring structural integrity and compliance with safety standards. Incorporate internal bracing, cushioning, and moisture barriers to protect sensitive equipment. Label crates with handling instructions, part numbers, and destination details. Collaborate with production and logistics teams to meet shipping schedules. Maintain inventory of crate-building materials and report shortages or defects. Follow all safety protocols and maintain a clean, organized work area. Qualifications: High school diploma or equivalent; vocational training in carpentry or industrial packaging preferred. 2+ years of experience in crate building or carpentry, ideally in a manufacturing environment. Ability to read and interpret blueprints and technical drawings. Skilled in using saws, drills, nail guns, and other carpentry tools. Familiarity with packaging standards for heavy industrial equipment (e.g., ISPM 15 compliance). Physical ability to lift heavy materials and work in a warehouse setting. Ability to work in a shop environment daily from 8:00 am until 5:00 pm Must Be Drug Free At All times. This is a Drug Free company. Must be a team player and a leader for this position. Looking to hire immediately. Must have reliable transportation at all times. This is an equal opportunity position for a skilled crate builder- carpenter