Fabricator jobs in Lansing, MI - 56 jobs

Average Starting Hourly Pay Range $15.50 - $25.00 Depending on Experience Day Shift Monday - Friday 6:00 am to 4:30 pm 16% Night Shift Premium Available Monday - Thursday 5:00 pm - 5:30 am PTO upon hire, Medical, Dental, and Vision Benefits are offered on the first day of the next month after hire, 401(K) after 6 months Overview: As a Fabricator I, II, or III for Keel Midwest, you will be responsible for fabricating steel, aluminum, and stainless-steel products, either under the supervision of a Team Leader or a Level III Fabricator if hired as Level I or II. On-the-job training is provided as necessary. Job Functions (All levels): * Flame cutting, beveling, pre- and tack-welding, grinding, straightening, bracing, and building basic fabrications to print using a fixture or where minimal or no machine stock is required. Level II * Assembly of mechanical or electro-mechanical assembly or sub-assembly of moderately complex units * May require adjusting, fitting, and aligning to ordinary tolerances. * Will work from blueprints and utilize basic math skills and hand tools, as well as assembly machines Level II * Same as above, but will also include the following: * Assemble intricate units composed of many components, parts, or of large and complicated units. * Performs highly diversified work involving considerable adjusting, fitting, and aligning to very close tolerances and strict inspection standards * May plan assembly procedures and direct the work of others. * May test or inspect assembled units Work Environment: Typical shop floor environment with frequent exposure to high heat, smoke, and other debris, with occasional exposure to extreme conditions depending on weather conditions. Physical Demands: Frequent sitting, standing, bending, and twisting, with handling of moderate to heavy components - up to 50 lbs without mechanical assistance. EEO STATEMENT KEEL is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, veteran status, or any other legally protected status. We believe in fostering a workplace that values diversity and promotes equity and respect for all. The job requirements are subject to change to reasonably accommodate qualified disabled individuals. Requirements * High School diploma or GED required. * Familiarity with tack welding, utilizing FCAW, GMAW, or stick electrodes. * Must be able to read standard and metric measurements. * Must be able to read and build from basic blueprints and detail prints with minimal machine surfaces. * Minimum 6 months experience in welding/fabrication for Level I. * Levels II and III should have up to, or exceeding, two (2) years of experience, should be able to read part drawings related to welding and fabricating, be able to weld using the most common materials and techniques, and utilize dimensional measurement tools. Salary Description $15 - $25/hour

Job DescriptionBenefits: 401(k) Paid time off Opportunity for advancement Training & development Closets by Design of South Central Michigan seeks a motivated, collaborative Production Worker / Saw Operator for our growing manufacturing/production team in Brighton, MI! We will train you to produce high-quality custom closets, garages, and home-office organization systems using a variety of industrial wood processing equipment in a safe production environment. Learn production methods focused on efficiency and quality to optimize output per hour in a team oriented atmosphere within a growing company. Benefits Listed pay includes hourly base pay based on relatable experience Performance reviews with potential merit increases Health benefits Retirement benefits Paid time off Monday through Friday, no major holidays Tools, equipment, uniform, and a 4-week training are provided Open door policy with the owner One week hiring process Job Responsibilities: Operate industrial woodworking machinery and hand tools. Understand company product lines, machinery, assembly standards, and installation techniques. Follow quality and safety standards. Maintain shop equipment according to an established schedule. Learn to review cut lists for daily jobs. Additional tasks or projects as defined by the Production Manager. Job Requirements Experience with woodworking or relatable equipment and hand tools is a plus Experience as a Sawyer/Table Saw Operator ideal Excellent problem-solving skills, able to multitask in a fast-paced environment Some prior woodworking experience is preferred, but not required Ability to adapt to changing priorities in time-sensitive production model Closets by Design - Overview Closets by Design is a nationally recognized leader in home organizing systems. We design, manufacture, and install a complete line of custom closets, home office furniture, media systems, wall beds, garage cabinetry, and more. We respond to all candidates within 24 hours and complete hiring in 7 days. Compensation: $18.00 - $22.00 per hour

Talon Recruiting has partnered with a National Heavy Equipment company. We are in search of a Shop Welder to join their team in Lansing, MI Job Responsibilities: Working in accordance with approved welding procedure data sheets (WPDS) on the shop floor Read drawings and engineering details TIG welding stainless steel piping Production welding, service & repair welding and prototype building Adhere to all safety policies and the use of all safe work practise Knowledge, Skills and Abilities: Four (4) plus years in the welding industry Excellent safety record Proficient in TIG welding stainless steel piping Have a sound understanding of welding procedures and welding data procedures Ability to prioritize and execute multiple tasks quickly The ability to work in a team or independently as required Possesses intermediate computer skills, specifically with MS Office Possesses the ability to interpret engineering specifications an asset Compensation & Benefits: • $32 /hour based on experience plus overtime • Insurance package • 401k

Enprotech is the largest supplier of repair, rebuilding, and field services for the metal forming and steel industry in North America and part of the ITOCHU family of companies. At Enprotech, we are committed to providing team members with a safe and inclusive place to work. We value each individual for who they are, what they bring to the table, and respect each other's ideas and contributions. Our core values drive our culture and commitment to our team members. We demonstrate this through every interaction with our team members, as we live out our core values. We are looking for team members that demonstrate these values both at work and in our personal lives. SAFETY | CAN-DO-ATTITUDE | URGENCY | PASSION |INTEGRITY |TEAMWORK | COMMUNITY Is this you? If you want a position to accelerate your career growth, and one where you can make a real impact on our people, our customers, and the business, this is the role for you! Job Description Position Summary & Objective Welds metal components together. Layout, fit, and fabricate metal components to assemble structural forms and repair machine parts using knowledge of welding techniques (using brazing and a variety of arc and gas welding equipment), metallurgy, and engineering requirements. Essential Functions Performed by the Position Welds metal parts together using both gas welding or brazing and any combination of arc welding processes. Perform related tasks such as thermal cutting and grinding. Repairs broken or cracked parts, fills holes, and welds overlay metal parts. May locate cracks using die penetrant NDT methods and repair cracks in large fabrications. Positions and sets up components in preparation for weld repairs and/or fabrication. Lays out parts and assemblies according to specifications. Creates templates and other work aids to hold and align parts. Able to rig (cranes) and fixture parts to be welded. Welds components in flat, vertical, or overhead positions and adjusts amperage, voltage, and speed during joining to assure required weld deposit. Inspects grooves, angles, gap allowances, and related aspects of assembly to ensure conformance to specifications using micrometers, calipers, and related precision measuring instruments. Pre-heat parts for effective welding. Perform quality work checks to ensure the product meets quality standards, using a variety of inspection tools and devices. Ability to work 2nd shift hours of 2:00pm - 10:30pm, Monday - Friday. Qualifications Required Education and Experience High school diploma or equivalent. 2-5 years' experience with stick, TIG, and MIG welding in a manufacturing environment. Heavy cross-section welding experience a plus. Knowledge, Skills, and Abilities Ability to read, interpret, and follow basic blueprints, engineering drawings, bill of materials, and other written instructions or procedures. Ability to use industry standards for proper equipment set-up and efficient use. Familiar with welding gases and appropriate uses to determine type of welding to be used, such as metallic arc, inert gas, electrode, and oven treatment, applying knowledge of metals to be joined, contours and angles to be formed, and specified stress tolerances. Ability to work with typical shop equipment and power tools and operate overhead cranes and fork trucks with proficiency. Ability to inspect welded joints, grooves, angles, gap allowances, and related aspects of assembly to ensure conformance to specifications using micrometers, calipers, and related precision measuring instruments. Ability to check over engineering drawings and specifications to plan welding operations. Must be proficient in using and adjusting MIG welders to the proper amperage and voltage for welding with various sizes of flux core wire. Must be able to handle tasks involving moderate physical exertion and must be able to stoop, bend, twist, and climb while working in confined areas at times. Must be able to wear a positive-pressure welding hood if or when required. Must be able to proficiently achieve time and quality standards without compromising welding safety standards. Must be capable of operating overhead cranes to position or move work pieces. Must be able to demonstrate basic welding skills during initial test which requires vertical and horizontal multiple-pass fillet welding on a small scale with 1/16 inch and 3/32 inch flux core and solid welding wire. Must be able to interpret welding prints to determine what type of weld the prints require and where the weld is to be placed. Must know what type of weld wire is used on different metals and what type of gas is used with the various welding wires. Must be able to read a tape measure and read blueprints. Must be able to use air, power, and hand tools, especially a torch and grinder. Be mechanically including and able to gather an analyze relevant information, and coordinate work with other team members. Be able to function independently within the context of the team's day-to-day activities. Able to properly pre-heat parts for effective welding and stress relieve finished components. Work in a safe manner at all times, following established policies and procedures. Must provide own welder's tools and equipment of the trade to perform duties. May be required to pass employer performance tests or standard tests to meet certification standards of governmental agencies or professional and technical associations that include: SMAW, arc welding PAC, plasma torch cutting CAC, carbon arc cutting GMAW, MIG GTAW Soldering Surface buildup (padding) with SMAW, FCAW, and GMAW VEE welding with SMAW, FCAW, and GMAW SAW, submerged arc welding Large- and small-scale fabricating Cast iron welding with GMAW and Oxygen/Acetylene OAW brazing Additional Information The benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: health coverage for you and your family through medical, dental, and vision plans a 401(k) plan in with a generous company match financial protection through disability, life, and accidental death & dismemberment insurance plans tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars a generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #IND1 Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

Welder/Fabricator Who we are We are a group of scientists, engineers, designers, technicians, and many others who are dedicated to changing the world by developing medical isotopes to treat and eradicate cancer. We also enjoy darts, cornhole, ping-pong, take-out for group lunches, chili cook-offs, and other fun events that makes our company a community where we make a life, not just a living. Who you are You are an open minded, committed team player who is able to meet people where they are and utilize communication and tools to masterfully guide them to the goal. You are energized by keeping things organized and supporting others in being successful. Your passions include hands-on work and truly understanding the fruits of the labor and the challenges faced in accomplishing the desired outcome. What you can expect to work on This position will work with various types of metals with various thickness: stainless steel, copper, carbon steel, and aluminum. This position is also conducting fabrication involving laying out, cutting, fitting, measuring, and welding metals to create the desired shape or object. What you need to succeed Excellent communication and interpersonal skills - you know how to develop & maintain strong relationships with all levels/teams of the organization Understand how to integrate into a new team/organization - you appreciate the history of current state, know how and when to make suggestions, as well as using just the right pace to reach the improved future state Understand your own communication and learning styles, assess other styles, and are able to find the right path to connect the two Exceptional technology skills - you find working with any software very comfortable and you easily adapt to new products. Essential functions Proficiently set up and operate all related welding equipment applying to comprehensive welding. Produce and verify parts as outlined in procedures and work instructions. Lay out, position and secure parts and assemblies according to specifications using measuring tools such as measuring tapes, straight edges, squares, and angle finders. Read and interpret blueprints and/or drawings to determine the specific welding requirement. TIG, MIG, and ARC welding processes with steel, aluminum, copper and stainless-steel components. Follow, create, support, and help maintain welding procedure specifications. Ensure work is done safely and meets quality standards. Keep work areas clean and organized and take proper care of all equipment and facilities. Safely move components and/or assemblies with forklift or overhead crane. Work with team members to maximize productivity and efficiency. Uphold all ISO and OSHA standards. Oxygen free copper to copper welding in a vacuum chamber / bubble of critical high RF components for high energy beam creation in an ultra-high vacuum. Stainless steel TIG welding of critical beamline components for linear accelerators. Vacuum tight stainless steel welding for critical radio-isotope containment vessels Multiple exciting structural welds to maintain ultra-high vacuum to allow electron beam acceleration to near the speed of light. Competencies Must be able to measure accurately. Must be able to operate all welding equipment and be familiar with and follow all safety features. Be able to give advice for welding procedures with all your ideas to make the job run smoothly and better. Be able to use a computer to document all jobs you are working on and completing. Must have basic knowledge of ISO Experience with steel, aluminum, titanium, copper, and stainless steel Education and experience 5+ years on the job experience or Associates degree/technical school with 2+ years on the job experience Ability to perform structurally sound and top quality MIG welds in the flat, vertical, and overhead positions. Experience with MIG welding (a plus) Experience with breaks, shears, drill press, manual lathe and manual Bridgeport's highly preferred. Ability to read blueprints, drawings, calipers, tape measures and angle gauges Working Conditions Ability to lift heavy items up to 60 pounds required Will work while standing, sitting, squatting, and lifting throughout the day/shift Other duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice

Enprotech is the largest supplier of repair, rebuilding, and field services for the metal forming and steel industry in North America and part of the ITOCHU family of companies. At Enprotech, we are committed to providing team members with a safe and inclusive place to work. We value each individual for who they are, what they bring to the table, and respect each other's ideas and contributions. Our core values drive our culture and commitment to our team members. We demonstrate this through every interaction with our team members, as we live out our core values. We are looking for team members that demonstrate these values both at work and in our personal lives. SAFETY | CAN-DO-ATTITUDE | URGENCY | PASSION |INTEGRITY |TEAMWORK | COMMUNITY Is this you? If you want a position to accelerate your career growth, and one where you can make a real impact on our people, our customers, and the business, this is the role for you! Job Description Position Summary & Objective Welds metal components together. Layout, fit, and fabricate metal components to assemble structural forms and repair machine parts using knowledge of welding techniques (using brazing and a variety of arc and gas welding equipment), metallurgy, and engineering requirements. Essential Functions Performed by the Position Welds metal parts together using both gas welding or brazing and any combination of arc welding processes. Perform related tasks such as thermal cutting and grinding. Repairs broken or cracked parts, fills holes, and welds overlay metal parts. May locate cracks using die penetrant NDT methods and repair cracks in large fabrications. Positions and sets up components in preparation for weld repairs and/or fabrication. Lays out parts and assemblies according to specifications. Creates templates and other work aids to hold and align parts. Able to rig (cranes) and fixture parts to be welded. Welds components in flat, vertical, or overhead positions and adjusts amperage, voltage, and speed during joining to assure required weld deposit. Inspects grooves, angles, gap allowances, and related aspects of assembly to ensure conformance to specifications using micrometers, calipers, and related precision measuring instruments. Pre-heat parts for effective welding. Perform quality work checks to ensure the product meets quality standards, using a variety of inspection tools and devices. Ability to work 2nd shift hours of 2:00pm - 10:30pm, Monday - Friday. Qualifications Required Education and Experience High school diploma or equivalent. 2-5 years' experience with stick, TIG, and MIG welding in a manufacturing environment. Heavy cross-section welding experience a plus. Knowledge, Skills, and Abilities Ability to read, interpret, and follow basic blueprints, engineering drawings, bill of materials, and other written instructions or procedures. Ability to use industry standards for proper equipment set-up and efficient use. Familiar with welding gases and appropriate uses to determine type of welding to be used, such as metallic arc, inert gas, electrode, and oven treatment, applying knowledge of metals to be joined, contours and angles to be formed, and specified stress tolerances. Ability to work with typical shop equipment and power tools and operate overhead cranes and fork trucks with proficiency. Ability to inspect welded joints, grooves, angles, gap allowances, and related aspects of assembly to ensure conformance to specifications using micrometers, calipers, and related precision measuring instruments. Ability to check over engineering drawings and specifications to plan welding operations. Must be proficient in using and adjusting MIG welders to the proper amperage and voltage for welding with various sizes of flux core wire. Must be able to handle tasks involving moderate physical exertion and must be able to stoop, bend, twist, and climb while working in confined areas at times. Must be able to wear a positive-pressure welding hood if or when required. Must be able to proficiently achieve time and quality standards without compromising welding safety standards. Must be capable of operating overhead cranes to position or move work pieces. Must be able to demonstrate basic welding skills during initial test which requires vertical and horizontal multiple-pass fillet welding on a small scale with 1/16 inch and 3/32 inch flux core and solid welding wire. Must be able to interpret welding prints to determine what type of weld the prints require and where the weld is to be placed. Must know what type of weld wire is used on different metals and what type of gas is used with the various welding wires. Must be able to read a tape measure and read blueprints. Must be able to use air, power, and hand tools, especially a torch and grinder. Be mechanically including and able to gather an analyze relevant information, and coordinate work with other team members. Be able to function independently within the context of the team's day-to-day activities. Able to properly pre-heat parts for effective welding and stress relieve finished components. Work in a safe manner at all times, following established policies and procedures. Must provide own welder's tools and equipment of the trade to perform duties. May be required to pass employer performance tests or standard tests to meet certification standards of governmental agencies or professional and technical associations that include: SMAW, arc welding PAC, plasma torch cutting CAC, carbon arc cutting GMAW, MIG GTAW Soldering Surface buildup (padding) with SMAW, FCAW, and GMAW VEE welding with SMAW, FCAW, and GMAW SAW, submerged arc welding Large- and small-scale fabricating Cast iron welding with GMAW and Oxygen/Acetylene OAW brazing Additional Information The benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: health coverage for you and your family through medical, dental, and vision plans a 401(k) plan in with a generous company match financial protection through disability, life, and accidental death & dismemberment insurance plans tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars a generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #IND1 Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

Full-time Description Average Starting Hourly Pay Range $17.00- $25.00 Depending on Experience Day Shift 6:00 am to 4:30 pm Monday - Friday 16% Night Shift Premium Available Monday - Thursday 5:00 pm-5:30 am PTO upon hire, Medical, Dental, and Vision Benefits are offered on the first day of the next month after hire, 401(K) after 6 months Overview: As a Welder I, II, or III for Keel Midwest, you will be responsible for utilizing the for main welding processes, GMAW, FCAW, GTAW, and SMAW, along with oxy-fuel cutting, carbon arc cutting, and plasma arc cutting to manufacture components from blueprints and utilizing Welding Procedure Specifications. Level I welders are considered to be in training under direct supervision of the department supervisor, while levels II and III are expected to have more advanced skills and responsibilities as listed below. All levels of welder will receive on the job training as required and necessary and are determined with a weld test and interview on site. Job Functions: Level I Will show basic understand of four main welding processes, as well as cutting processes described above, to perform duties. Should have basic understanding of weld symbols and positions as well as blueprint reading. Requires general knowledge of various hand tools that will be used, such as grinders, tape measure, chipping hammers, and Personal Protective equipment. Show a basic understanding of the differences between commonly used materials, such as carbon steel, aluminum, and stainless steel. Will maintain welding supplies, welding equipment, and work environment Will set parameters on their welding machine with guidance from the supervisor and show basic understanding of information on the Welding Procedure Specifications. Level II Same as above, but will also include the following: Will have a basic understanding of AWS requirements. Will fully understand information listed on Welding Procedure Specifications. Will have a good understanding of weld symbols and use of weld gauges. Demonstrate advanced knowledge of blueprint reading and effectively locating information. Will have advanced skills in at least one of the main welding processes and advanced skills in cutting processes. Will be able to be proficient cutting straight lines, shapes, and bevels utilizing manual and automatic equipment and on various materials. Will be able to do so efficiently and with minimal supervision. Level III Same as above, but will also include the following: Display expert skills in one of the main welding processes, as well as in cutting processes, listed above. Advanced knowledge of blueprint reading that pertains to weld symbols and weld callouts. Efficient and effective use of measuring equipment. Must be able to convert between fractions and decimals, and between metric and standard units. Good knowledge of the metallurgical effects of welding that include distortion and contamination. Will be able to troubleshoot and correct welding equipment issues. Will maintain a very low level of rework. Must have the aptitude to assist and train Welders level I and II. Physical Demands: Frequent standing, sitting, bending, stooping, and twisting. Must be able to lift up to 50 lbs. without mechanical assistance. Work Environment: Typical welding/fabrication shop floor, with fumes from welding and risk of eye flash. Welding helmets, eye protection, and ear protection are required along with safety toed boots. Exposure to debris/particulates, moving equipment, and high temperatures is frequent, and there is risk of sustain high temperatures depending on weather conditions. EEO STATEMENT KEEL is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, veteran status, or any other legally protected status. We believe in fostering a workplace that values diversity and promotes equity and respect for all. The job requirements are subject to change to reasonably accommodate qualified disabled individuals. Requirements High School Diploma or GED required. Technical training or equivalent experience of less than one (1) year or up to two (2) years for level I. Two (2) or more years for level II, and 5+ years for Level III. Must be able to follow written and verbal instructions from supervisor. Must demonstrate a willingness to learn, be part of a team environment, and receive constructive criticism with regards to quality to meet objectives. All candidates must be able to pass criminal background and drug screening requirements. Salary Description $17.00 - $25.00/hour

Build More Than Trailers - Build Your Career at Legend Manufacturing, Inc. Are you someone who enjoys working with your hands, crafting high-quality products, and being part of a skilled team? We're looking for welders to help build Legend Premium Trailers . Whether you're an experienced welder or new to the trade, we want to meet you. We believe great welders come from all walks of life and we welcome you to apply! What You'll Do Measure and cut framing as needed. MIG/TIG weld frames and trailer components. Read blueprints and follow detailed welding specs. Use shop tools and machinery safely and efficiently (saws, grinders, etc.) Inspect and ensure welds meet our high-quality standards. Crosstrain between different jobs. Work in a clean, organized, and team-focused shop. Requirements Requirements · High school diploma/GED. · Previous welding experience. · Able to accurately read a tape measure. · Ability to read and understand blueprints. · Able to stand, reach, bend, kneel and twist repeatedly.

At USA Wood Door, we deliver tailored solutions with trusted service, exceptional quality, and superior speed. Our team works closely together and with our customers to understand project needs, craft custom doors and frames, and deliver them fast - often in two weeks or less. With deep expertise and a commitment to reliability, we help customers solve problems and keep projects on track across industries like healthcare, hospitality, education, and retail. If you're ready to make an impact in a collaborative, fast-paced environment, join USA Wood Door and help lead the way in speed, service, and quality . We are seeking a skilled Welder to join our team, specializing in the fabrication, Creation, and, repair,of metal doors and metal door frames. The ideal candidate will have experience with various welding techniques, strong attention to detail, and a commitment to safety and quality craftsmanship. Key Responsibilities: • Weld, fabricate, and assemble metal doors and door frames according to specifications and blueprints. • Use welding techniques to join metals. • Operate welding equipment, grinders, and other tools necessary for metal fabrication. • Perform quality checks to ensure structural integrity and proper measurements. • Follow safety protocols and maintain a clean, organized workspace. • Collaborate with other team members, including engineers, fabricators, and Sales team members. • Read and interpret technical drawings, blueprints, and schematics. Qualifications Qualifications: • Proven experience in welding and metal fabrication, preferably with doors and frames. • Ability to use grinders, saws, and other metalworking tools. • Strong understanding of welding safety and best practices. • Ability to read and interpret blueprints and technical drawings. • Attention to detail and strong problem-solving skills. • Physical ability to lift, move, and position heavy materials. • Welding certifications are a plus. Work Environment: • Manufacturing or fabrication shop setting. • Safety equipment, including welding masks, gloves, and protective clothing, must be worn.

[if gte mso 9]> Normal 0 false false false DE X-NONE X-NONE [if gte mso 9]> [if !mso]>st1\:*{behavior:url(#ieooui) } [if gte mso 10]> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Times New Roman",serif; mso-ansi-language:DE; mso-fareast-language:DE;} StartFragment Objective of the Position: Rework prewelded assemblies from robotic stations. Reworks surface defects such as dings, dents, and buckles in exhaust systems by performing the following duties. The position incumbent ensures, that · Examines surface of part to determine extent of defect. · Fills holes and gaps of defected part by Mig welding area based on specifications. · Welds sub-assemblies and/or final assemblies · Smooth welded or defected area by Tig welding if required per specification. · 100% rework work on parts requires operator sign-off and documentation of all non-conformances. · Place re-worked parts on in-process racks to be leak tested. · Leak tests component part and rework if needed. · Operate robotic weld cells, gauges, leak testers · May manually assembles and welds complete exhaust systems that have not already been welded from start to end using components parts supplied. The position incumbent ensures, that · Conduct all business related activities for, and on the behalf of, Eberspaecher within the limits of applicable local, state, and federal legal requirements. · Provide support to, and compliance with, all local and corporate Eberspaecher Health, Safety & Environmental (HSE) policies, procedures and other HSE related requirements. · Quality - Demonstrates accuracy and thoroughness and follows all EETAM polices related to TS16949 and ISO 14001; looks for way to improve and promote quality. · Remove & replace individual component parts, occasionally performing welds that are 100% of the length of the seam. · Other duties as assigned. Requirement Profile: Professional Background / Basic Qualification / Work Experience: · High school diploma or general education degree (GED) · Minimum six (6) months' related experience in manufacturing setting. · Must pass each standard global re-certification test as required. · Required to take qualification tests using the GMAW (MIG/MAG) and GTAW (TIG) processes. Technical Expertise: · Ability to read and comprehend simple instructions, short correspondence, and memos, and write simple correspondence. · Strives to continuously improve expertise. Methodical Competence: · Ability to handle multiple tasks smoothly in situations containing a moderate to high level of stress. · Ability to maintain a safe and clean work environment. · Adaptability - Able to deal with frequent change, delays, or unexpected events. · Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent. · Dependability - Follows instructions, responds to management direction. · Organizational Support - Follows policies and procedures; Supports organization's goals and values. · Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information; Develops alternative solutions · Takes responsibility for own actions; Commits to long hours of work when necessary to reach goals Interpersonal Competence: · Ability to be self-motivated and to work with minimum supervision. · Ability to work as a Team Member towards overall company objectives. Teamwork - Contributes to building a positive team spirit. · Communicate and present proper information to c other employees of the organization. · Judgment - Displays willingness to make decisions based on gathered facts; Includes appropriate people in decision-making process. · Oral Communication - Speaks clearly in positive or negative situations; listens and gets clarification; Responds well to questions; Participates in meetings. · Professionalism - Reacts well under pressure; Treats others with dignity, respect and consideration. Supervisory Competence: · This position has no supervisory responsibilities. Working Conditions: · This position involves working indoors around mechanical and hazards, fumes, irritants, with exposure to cold, heat and high noise levels under adverse conditions. · While performing the duties of this job, the employee is exposed to moving mechanical parts and fumes or airborne particles. Physical Requirements: Sits: Occasionally .25 - 2.5 hours daily Stands: Frequently 2.5 - 5.5 hours daily Walks: Occasionally .25 - 2.5 hours daily Drive: Never Lift/Carry 0-10 lbs.: Frequently 2.5 - 5.5 hours daily Lift/Carry 10-20 lbs.: Frequently 2.5 - 5.5 hours daily Lift/Carry 20-50 lbs.: Frequently 2.5 - 5.5 hours daily Lift/Carry 50- over 100 lbs.: Occasionally .25 - 2.5 hours daily Reach Above: Frequently 2.5 - 5.5 hours daily Bend/Stoop: Frequently 2.5 - 5.5 hours daily Use Hands for Pushing/Pulling: Frequently 2.5 - 5.5 hours daily Use Hands for Manipulations: Continuously 5.5 - 8 hours daily Stress Level of Job: Low The statements herein are intended to describe the general nature and level or work being performed by employees, and are not constructed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Further, they do not establish a contract for employment and are subject to change at the discretion of Eberspaecher North America, Inc. EndFragment

Responsive recruiter Benefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance Freedom Motors USA is a nationwide, family-owned and operated company, headquartered in Battle Creek, MI, and is the leading manufacturer and retailer of wheelchair-accessible vehicles with the widest-ranging product line in the United States. Founded in 1987, we focus on providing customized options for the unique needs of our customers. The Welder is a key team member that will be responsible for the welding of the manufacturing process. What you'll do: Assume responsibility for the welding part of the manufacturing process. Follow all applicable in-house, industry, and regulatory health and safety guidelines. Read and interpret blueprints and specifications as directed. Operate MIG welder, grinder, reciprocating saw and cut-off wheel. Ability to bend and shape pipes of various materials and sizes with precision. Knowledge in pipe fitting and welding techniques. Troubleshoot mechanical issues on equipment as needed. Maintain and grow professional and technical knowledge. What you'll need: Working knowledge of lean manufacturing practices. Ability to communicate effectively via written and verbal methods. Hands on welding experience, ideally in the automotive or manufacturing fields. Understanding of functionality and mechanics of a vehicle's rear suspension. Knowledge of welding machine operation, regulating current, and voltage for the proper fusion of metals. Must be proficient with analyzing and fabricating from drawings, schematics and sketches. Mechanically inclined and understand vehicle mechanics and body work. Maintain an organized and orderly work area. Ability to troubleshoot issues and problem-solve as needed. Pre-inspection of parts, ability to use hand and power tools, attention to quality with minimal errors. When you join Freedom Motors USA, you do more than simply switch companies to advance your career. You become part of the Freedom Family, a team of talented people who drive innovation, embrace change, and celebrate our community that is Freedom Motors USA! This job description is meant to provide an overview of the duties and responsibilities of this position. It is not intended to be an all inclusive listing. Why Freedom Motors USA? When you join Freedom Motors USA you do more than simply switch companies to advance your career. You become part of the Freedom Family, a team of talented and driven individuals fueled by our mission to enhance the lives of the customers we serve by producing the nation's largest variety of wheelchair-accessible vehicles!

DEPARTMENT: Pit Products, BSR, Heavy Assembly SUPERVISED BY: Welding Manager STATUS: Full time non-exempt Technique, Inc. is a Michigan-based stamping, tubing and welding facility offering the shortest lead-times and highest quality parts in the industry. We offer high-speed prototypes, ultra-low volume stampings, tubing and assemblies for production and emergency-based manufacturing for industries such as aerospace, automotive, medical and food processing. Technique, Inc. is a group of highly skilled technicians who consistently strive to improve the tools, technology and processes which allow us to continue growing at an incredible rate. The company is dedicated to the success of each team member in a culture that values safety, integrity, teamwork, learning opportunities and results. Position Summary: This position requires use of MIG/TIG welding equipment in accordance with job and customer demand welding both stainless steel and carbon steel. Support the quality assurance team with part layouts and inspections, requiring knowledge of GD&T and print reading. The employee will complete welding assemblies to customer requirements. Essential Job Functions: Set up and use MIG/TIG welding equipment to weld basic GTAW and GMAW mild steel joints Assemble exhaust assemblies, racks, and prototyping fixtures Perform 1 st piece table layouts and troubleshoot builds using CMM reports to get a good first piece Maintain job documentation Ability to load and run robot welder in auto and make needed repairs on assemblies after robot Investigate and correct issues that are found during a build and or inspection of an assembly Ensure that products shipped meet internal and customer requirements per CMM reports, blueprints, and AWS specifications. Other duties as assigned Minimum Physical Expectations: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Minimum Environmental Expectations: While performing the duties of this job, the employee is frequently exposed to manufacturing processes that include and are not limited to; fumes or airborne particles, hazardous chemicals, moving mechanical parts, industrial equipment, and vibration. The noise level in the work environment can be loud. Qualifications: EDUCATION: High School Diploma or GED, vocational training CREDENTIALS/LICENSURE: AWS Certification, forklift license preferred MINIMUM EXPERIENCE: 1-2 years welding experience in an industrial setting Position Type and Expected Hours: This is a full-time non-exempt position with a minimum of 40hrs / week with overtime as needed. Note: days and hours required may vary. Shifts include 1 st , 7:00a - 3:30p M-F, 2 nd , 3:30p - 2:00a, M-TH and Weekend Days 5:00a - 5:30p F-Sun. Shift premiums are available. Position Requirements (Skills & Abilities): Ability to multitask in a fast-paced environment Basic problem solving skills Ability to read blueprints and understand GD&T notation Ability to use hand and layout/inspection tools TRAVEL No travel is required for this position. OTHER DUTIES Please note this job description is not designed to cover or contain a complete comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

DEPARTMENT: Pit Products, BSR, Heavy Assembly SUPERVISED BY: Welding Manager STATUS: Full time non-exempt Technique, Inc. is a Michigan-based stamping, tubing and welding facility offering the shortest lead-times and highest quality parts in the industry. We offer high-speed prototypes, ultra-low volume stampings, tubing and assemblies for production and emergency-based manufacturing for industries such as aerospace, automotive, medical and food processing. Technique, Inc. is a group of highly skilled technicians who consistently strive to improve the tools, technology and processes which allow us to continue growing at an incredible rate. The company is dedicated to the success of each team member in a culture that values safety, integrity, teamwork, learning opportunities and results. Position Summary: This position requires use of MIG/TIG welding equipment in accordance with job and customer demand welding both stainless steel and carbon steel. Support the quality assurance team with part layouts and inspections, requiring knowledge of GD&T and print reading. The employee will complete welding assemblies to customer requirements. Essential Job Functions: Set up and use MIG/TIG welding equipment to weld basic GTAW and GMAW mild steel joints Assemble exhaust assemblies, racks, and prototyping fixtures Perform 1st piece table layouts and troubleshoot builds using CMM reports to get a good first piece Maintain job documentation Ability to load and run robot welder in auto and make needed repairs on assemblies after robot Investigate and correct issues that are found during a build and or inspection of an assembly Ensure that products shipped meet internal and customer requirements per CMM reports, blueprints, and AWS specifications. Other duties as assigned Minimum Physical Expectations: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Minimum Environmental Expectations: While performing the duties of this job, the employee is frequently exposed to manufacturing processes that include and are not limited to; fumes or airborne particles, hazardous chemicals, moving mechanical parts, industrial equipment, and vibration. The noise level in the work environment can be loud. Qualifications: EDUCATION: High School Diploma or GED, vocational training CREDENTIALS/LICENSURE: AWS Certification, forklift license preferred MINIMUM EXPERIENCE: 1-2 years welding experience in an industrial setting Position Type and Expected Hours: This is a full-time non-exempt position with a minimum of 40hrs / week with overtime as needed. Note: days and hours required may vary. Shifts include 1st , 7:00a - 3:30p M-F, 2nd, 3:30p - 2:00a, M-TH and Weekend Days 5:00a - 5:30p F-Sun. Shift premiums are available. Position Requirements (Skills & Abilities): Ability to multitask in a fast-paced environment Basic problem solving skills Ability to read blueprints and understand GD&T notation Ability to use hand and layout/inspection tools TRAVEL No travel is required for this position. OTHER DUTIES Please note this job description is not designed to cover or contain a complete comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Powered by JazzHR jIczdZjx6a

We are BEKUM America Corporation, the world's leading designer and builder of extrusion blow molding machines. We are proud of our legacy, our accomplishments and our worldwide reputation for excellence and innovation. We recognize that our employees are key to our success and we believe in mentoring, tutoring and further developing our employees. We know PEOPLE MAKE THE DIFFERENCE! Job Description This position contributes to the manufacturing of quality blow molding machines, auxiliary equipment and all sub-assemblies with the use of power and hand tools, precision tools, and any other required tools and/or equipment by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Build or manufacture to drawing, bill of material, all items to established production quality and quantity as scheduled. Proficient use of precision measuring equipment. Confer with supervisors, engineering, production personnel or others to resolve manufacturing problems. Report shortages of parts, tools, and materials in a timely manner. Operate power equipment and material handling equipment (forklifts, cranes, etc.). Must have personal hand tools to perform tasks effectively Familiarity with computers. Develop specifications from general description and draw sketch of part or product to be manufactured. Ability to work with metric and inch system. Responsible for submitting daily time accounting and payroll information or other paperwork requested. Performs all tasks with minimal supervisory and/or engineering assistance. Qualifications Journeyman Welder Certification or four (4) to eight (8) years' job related experience and/or equivalent education and experience. Capable of welding/fabricating sub-assemblies and/or final machine assembly with use of routers, drawings, and bill of material with minimal assistance. Capable of making hand drawings of components. Documents changes as needed on routings, drawings, and bill of material. Ability to perform all basic work for fabrication, welding, and sheet metal including structural fabrications. Knowledge and use of all types of fasteners and some fittings. Assists in building of prototype equipment. Ability to layout for forming, drilling, tapping, pinning, etc. Advanced knowledge and ability to apply metallurgy for distortion control and welding procedures. Proficient in flame straightening and three (3) dimensional layout for sheet metal, building of prototypes, builds jigs and fixtures. Minimum requirement of 4 years of job related experience. Assists the department supervisor with meeting a predetermined schedule and development of future schedules including coordination of manpower and projects assigned. Leadership experience preferred. Must have personal hand tools to perform tasks effectively. Ability to use mainframe computer. Ability to work with metric and standard inch system. Additional Information Bekum America Corporation offers a total compensation package that emphasizes the health and wellbeing of our diverse workforce, and encourages work-life balance. Our comprehensive benefits suite aligns with our belief that people are at the center of our success and should be valued as such. Bekum America offers full medical, dental, vision, life, short and long term disability, tuition assistance, paid holidays, competitive vacation package, 401 (K) with company match and profit sharing, increases tied to performance, and a path for continued training and development. Bekum America Corporation reserves the right to change, amend, add, delete, and otherwise assign any and all duties, responsibilities, and position titles as it deems necessary to meet the needs of its business. Your contact person for this position: Amber Stein, HR Manager, **************, *******************

LJ Inc. is a leader in providing cutting-edge industrial, commercial, and residential turn-key solutions and dedicated to delivering exceptional services to our valued customers. With a strong commitment to innovation, quality, and customer satisfaction, we have established ourselves as a trusted name in the industry. Our team is comprised of talented professionals who are passionate about what they do. We believe in providing our employees with the necessary tools, resources, and support to excel in their roles and reach their full potential. At LJ Inc, we strive for excellence in everything we do. We embrace new technologies, methodologies, and industry trends to stay ahead of the curve. Our commitment to continuous improvement and customer satisfaction sets us apart and drives our success. Join our team and become part of a company that values your skills, knowledge, and contribution. This is for a second shift, 4pm - 2:30am Essential Job Functions: Measure and cut metal components using manual or automated tools Weld components using appropriate welding techniques (e.g., MIG, TIG, Stick) to meet quality standards Conduct inspections to ensure welded joints are structurally sound and meet specifications Fabricate metal structures, equipment, and components according to project requirements Collaborate with other team members to complete projects within deadlines Maintain welding equipment and tools in good working condition Adhere to safety procedures and regulations at all times Qualifications: Proficiency in reading and interpreting blueprints, drawings, and welding symbols Strong knowledge of welding techniques, equipment, and materials Ability to perform various welding processes (e.g., MIG, TIG, Stick) with precision Skilled in using hand and power tools for cutting, grinding, and shaping metal Excellent attention to detail and quality craftsmanship Ability to work independently and collaboratively in a fast-paced environment Strong communication and problem-solving skills High school diploma or equivalent; technical certification or vocational training in welding is preferred Valid welding certification(s) is a plus What we offer: Competitive compensation 100% company paid health insurance for employee and dependents 100% company paid dental and vision for employee and dependents 401k with 3% company match Overtime after 8 hours PTO and vacation time And much more!

Fabricator - 1st Shift Maintenance Department Reports to: Maintenance Manager $33-$38/hour based on experience We have an exciting opportunity for a problem solver, a change agent who is excited about taking Motus to the NEXT level. The Fabricator will be responsible for troubleshooting and repairing mechanical, electrical, electronic, pneumatic, and hydraulic systems on all manufacturing equipment. A successful candidate will have a sense of urgency with a safety mindset. RESPONSIBILITIES: Fabricate, weld, and assemble metal components for equipment, guards, fixtures, and structural improvements. Troubleshoot issues and perform repairs on machinery, conveyors, platforms, and facility infrastructure. Read and interpret technical drawings, blueprints, and schematics. Perform MIG/TIG/Stick welding and cutting using torches, plasma cutters, and related tools. Maintain and repair fabrication equipment such as welders, grinders, presses, and saws. Assist with preventive maintenance activities and support broader maintenance team tasks. Ensure all work adheres to safety standards, OSHA requirements, and company policies. Collaborate with engineering or maintenance leadership to design cost-effective solutions for equipment improvements. Maintain accurate documentation of repairs, parts used, and fabricated components. Support emergency breakdown repairs as needed to minimize equipment downtime. REQUIREMENTS: Able to perform work responsibilities safety and ability to follow all safety rules and regulations Attention to detail and ability to manage multiple projects in a timely manner 2-5 year experience in fabrication, welding, or industrial maintenance experience required Ability to read and interpret mechanical blueprints and schematics Strong mechanical aptitude with experience using hand tools, power tools, and fabrication machinery Overtime (hours worked beyond 40 per week) is a required component of this role and is considered an essential job function. Who we are Motus Integrated Technologies is a rapidly growing, half a billion-dollar global manufacturer of high-performance headliners, interior trim, and fiber solution products for the global automotive market. Headquartered in Holland Michigan, Motus operates state-of-the-art manufacturing facilities in North America (U.S. and Mexico), with over 20 entities worldwide. Motus is a portfolio company of Atlas Holdings, an industrial holding company headquartered in Greenwich, CT. Motus Integrated Technologies offers competitive compensation and benefits package (including but not limited to medical, dental, vision, Rx, life insurance, disability coverage, 401K and company match, paid holidays, tuition reimbursement eligibility, etc.) Motus: United by Diversity; Motus is an Equal Opportunity Employer At Motus, we are proud of our diversity. Our family is comprised of people from a variety of different backgrounds, races, creeds, and colors who have come together to try to `make the world a better place. We have seen what equality can do within our company. We believe everyone deserves the same opportunities to grow, thrive, and passionately live their lives. Unsolicited Resumes from Third-Party Recruiters Please note that consistent with Motus Integrated Technologies policy, we do not accept unsolicited resumes from third-party recruiters. Any employment agency, person, or entity that submits an unsolicited resume does so with the understanding that Motus will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity.

Enprotech is the largest supplier of repair, rebuilding, and field services for the metal forming and steel industry in North America and part of the ITOCHU family of companies. At Enprotech, we are committed to providing team members with a safe and inclusive place to work. We value each individual for who they are, what they bring to the table, and respect each other's ideas and contributions. Our core values drive our culture and commitment to our team members. We demonstrate this through every interaction with our team members, as we live out our core values. We are looking for team members that demonstrate these values both at work and in our personal lives. SAFETY | CAN-DO-ATTITUDE | URGENCY | PASSION |INTEGRITY |TEAMWORK | COMMUNITY Is this you? If you want a position to accelerate your career growth, and one where you can make a real impact on our people, our customers, and the business, this is the role for you! Job Description Position Summary & Objective Welds metal components together. Layout, fit, and fabricate metal components to assemble structural forms and repair machine parts using knowledge of welding techniques (using brazing and a variety of arc and gas welding equipment), metallurgy, and engineering requirements. Essential Functions Performed by the Position * Welds metal parts together using both gas welding or brazing and any combination of arc welding processes. * Perform related tasks such as thermal cutting and grinding. * Repairs broken or cracked parts, fills holes, and welds overlay metal parts. * May locate cracks using die penetrant NDT methods and repair cracks in large fabrications. * Positions and sets up components in preparation for weld repairs and/or fabrication. * Lays out parts and assemblies according to specifications. Creates templates and other work aids to hold and align parts. Able to rig (cranes) and fixture parts to be welded. * Welds components in flat, vertical, or overhead positions and adjusts amperage, voltage, and speed during joining to assure required weld deposit. * Inspects grooves, angles, gap allowances, and related aspects of assembly to ensure conformance to specifications using micrometers, calipers, and related precision measuring instruments. * Pre-heat parts for effective welding. * Perform quality work checks to ensure the product meets quality standards, using a variety of inspection tools and devices. * Ability to work 1st shift hours of 6:00am - 2:30pm, Monday - Friday. Qualifications Required Education and Experience * High school diploma or equivalent. * 2-5 years' experience with stick, TIG, and MIG welding in a manufacturing environment. * Heavy cross-section welding experience a plus. Knowledge, Skills, and Abilities * Ability to read, interpret, and follow basic blueprints, engineering drawings, bill of materials, and other written instructions or procedures. * Ability to use industry standards for proper equipment set-up and efficient use. * Familiar with welding gases and appropriate uses to determine type of welding to be used, such as metallic arc, inert gas, electrode, and oven treatment, applying knowledge of metals to be joined, contours and angles to be formed, and specified stress tolerances. * Ability to work with typical shop equipment and power tools and operate overhead cranes and fork trucks with proficiency. * Ability to inspect welded joints, grooves, angles, gap allowances, and related aspects of assembly to ensure conformance to specifications using micrometers, calipers, and related precision measuring instruments. * Ability to check over engineering drawings and specifications to plan welding operations. * Must be proficient in using and adjusting MIG welders to the proper amperage and voltage for welding with various sizes of flux core wire. * Must be able to handle tasks involving moderate physical exertion and must be able to stoop, bend, twist, and climb while working in confined areas at times. * Must be able to wear a positive-pressure welding hood if or when required. * Must be able to proficiently achieve time and quality standards without compromising welding safety standards. * Must be capable of operating overhead cranes to position or move work pieces. * Must be able to demonstrate basic welding skills during initial test which requires vertical and horizontal multiple-pass fillet welding on a small scale with 1/16 inch and 3/32 inch flux core and solid welding wire. * Must be able to interpret welding prints to determine what type of weld the prints require and where the weld is to be placed. * Must know what type of weld wire is used on different metals and what type of gas is used with the various welding wires. * Must be able to read a tape measure and read blueprints. * Must be able to use air, power, and hand tools, especially a torch and grinder. * Be mechanically including and able to gather an analyze relevant information, and coordinate work with other team members. * Be able to function independently within the context of the team's day-to-day activities. * Able to properly pre-heat parts for effective welding and stress relieve finished components. * Work in a safe manner at all times, following established policies and procedures. * Must provide own welder's tools and equipment of the trade to perform duties. * May be required to pass employer performance tests or standard tests to meet certification standards of governmental agencies or professional and technical associations that include: * SMAW, arc welding * PAC, plasma torch cutting * CAC, carbon arc cutting * GMAW, MIG * GTAW * Soldering * Surface buildup (padding) with SMAW, FCAW, and GMAW * VEE welding with SMAW, FCAW, and GMAW * SAW, submerged arc welding * Large- and small-scale fabricating * Cast iron welding with GMAW and Oxygen/Acetylene OAW brazing Additional Information The benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: * health coverage for you and your family through medical, dental, and vision plans * a 401(k) plan in with a generous company match * financial protection through disability, life, and accidental death & dismemberment insurance plans * tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars * a generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #INDPREM Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

Average Starting Hourly Pay Range $17.00- $25.00 Depending on Experience Day Shift 6:00 am to 4:30 pm Monday - Friday 16% Night Shift Premium Available Monday - Thursday 5:00 pm-5:30 am PTO upon hire, Medical, Dental, and Vision Benefits are offered on the first day of the next month after hire, 401(K) after 6 months Overview: As a Welder I, II, or III for Keel Midwest, you will be responsible for utilizing the for main welding processes, GMAW, FCAW, GTAW, and SMAW, along with oxy-fuel cutting, carbon arc cutting, and plasma arc cutting to manufacture components from blueprints and utilizing Welding Procedure Specifications. Level I welders are considered to be in training under direct supervision of the department supervisor, while levels II and III are expected to have more advanced skills and responsibilities as listed below. All levels of welder will receive on the job training as required and necessary and are determined with a weld test and interview on site. Job Functions: Level I * Will show basic understand of four main welding processes, as well as cutting processes described above, to perform duties. * Should have basic understanding of weld symbols and positions as well as blueprint reading. * Requires general knowledge of various hand tools that will be used, such as grinders, tape measure, chipping hammers, and Personal Protective equipment. * Show a basic understanding of the differences between commonly used materials, such as carbon steel, aluminum, and stainless steel. * Will maintain welding supplies, welding equipment, and work environment * Will set parameters on their welding machine with guidance from the supervisor and show basic understanding of information on the Welding Procedure Specifications. Level II * Same as above, but will also include the following: * Will have a basic understanding of AWS requirements. * Will fully understand information listed on Welding Procedure Specifications. * Will have a good understanding of weld symbols and use of weld gauges. * Demonstrate advanced knowledge of blueprint reading and effectively locating information. * Will have advanced skills in at least one of the main welding processes and advanced skills in cutting processes. * Will be able to be proficient cutting straight lines, shapes, and bevels utilizing manual and automatic equipment and on various materials. * Will be able to do so efficiently and with minimal supervision. Level III * Same as above, but will also include the following: * Display expert skills in one of the main welding processes, as well as in cutting processes, listed above. * Advanced knowledge of blueprint reading that pertains to weld symbols and weld callouts. * Efficient and effective use of measuring equipment. * Must be able to convert between fractions and decimals, and between metric and standard units. * Good knowledge of the metallurgical effects of welding that include distortion and contamination. * Will be able to troubleshoot and correct welding equipment issues. * Will maintain a very low level of rework. * Must have the aptitude to assist and train Welders level I and II. Physical Demands: Frequent standing, sitting, bending, stooping, and twisting. Must be able to lift up to 50 lbs. without mechanical assistance. Work Environment: Typical welding/fabrication shop floor, with fumes from welding and risk of eye flash. Welding helmets, eye protection, and ear protection are required along with safety toed boots. Exposure to debris/particulates, moving equipment, and high temperatures is frequent, and there is risk of sustain high temperatures depending on weather conditions. EEO STATEMENT KEEL is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, veteran status, or any other legally protected status. We believe in fostering a workplace that values diversity and promotes equity and respect for all. The job requirements are subject to change to reasonably accommodate qualified disabled individuals. Requirements * High School Diploma or GED required. * Technical training or equivalent experience of less than one (1) year or up to two (2) years for level I. Two (2) or more years for level II, and 5+ years for Level III. * Must be able to follow written and verbal instructions from supervisor. * Must demonstrate a willingness to learn, be part of a team environment, and receive constructive criticism with regards to quality to meet objectives. * All candidates must be able to pass criminal background and drug screening requirements. Salary Description $17.00 - $25.00/hour

Objective of the Position: Rework prewelded assemblies from robotic stations. Reworks surface defects such as dings, dents, and buckles in exhaust systems by performing the following duties. The position incumbent ensures, that · Examines surface of part to determine extent of defect. · Fills holes and gaps of defected part by Mig welding area based on specifications. · Welds sub-assemblies and/or final assemblies · Smooth welded or defected area by Tig welding if required per specification. · 100% rework work on parts requires operator sign-off and documentation of all non-conformances. · Place re-worked parts on in-process racks to be leak tested. · Leak tests component part and rework if needed. · Operate robotic weld cells, gauges, leak testers · May manually assembles and welds complete exhaust systems that have not already been welded from start to end using components parts supplied. The position incumbent ensures, that · Conduct all business related activities for, and on the behalf of, Eberspaecher within the limits of applicable local, state, and federal legal requirements. · Provide support to, and compliance with, all local and corporate Eberspaecher Health, Safety & Environmental (HSE) policies, procedures and other HSE related requirements. · Quality - Demonstrates accuracy and thoroughness and follows all EETAM polices related to TS16949 and ISO 14001; looks for way to improve and promote quality. · Remove & replace individual component parts, occasionally performing welds that are 100% of the length of the seam. · Other duties as assigned. Requirement Profile: Professional Background / Basic Qualification / Work Experience: · High school diploma or general education degree (GED) · Minimum six (6) months' related experience in manufacturing setting. · Must pass each standard global re-certification test as required. · Required to take qualification tests using the GMAW (MIG/MAG) and GTAW (TIG) processes. Technical Expertise: · Ability to read and comprehend simple instructions, short correspondence, and memos, and write simple correspondence. · Strives to continuously improve expertise. Methodical Competence: · Ability to handle multiple tasks smoothly in situations containing a moderate to high level of stress. · Ability to maintain a safe and clean work environment. · Adaptability - Able to deal with frequent change, delays, or unexpected events. · Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent. · Dependability - Follows instructions, responds to management direction. · Organizational Support - Follows policies and procedures; Supports organization's goals and values. · Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information; Develops alternative solutions · Takes responsibility for own actions; Commits to long hours of work when necessary to reach goals Interpersonal Competence: · Ability to be self-motivated and to work with minimum supervision. · Ability to work as a Team Member towards overall company objectives. Teamwork - Contributes to building a positive team spirit. · Communicate and present proper information to c other employees of the organization. · Judgment - Displays willingness to make decisions based on gathered facts; Includes appropriate people in decision-making process. · Oral Communication - Speaks clearly in positive or negative situations; listens and gets clarification; Responds well to questions; Participates in meetings. · Professionalism - Reacts well under pressure; Treats others with dignity, respect and consideration. Supervisory Competence: · This position has no supervisory responsibilities. Working Conditions: · This position involves working indoors around mechanical and hazards, fumes, irritants, with exposure to cold, heat and high noise levels under adverse conditions. · While performing the duties of this job, the employee is exposed to moving mechanical parts and fumes or airborne particles. Physical Requirements: Sits: Occasionally .25 - 2.5 hours daily Stands: Frequently 2.5 - 5.5 hours daily Walks: Occasionally .25 - 2.5 hours daily Drive: Never Lift/Carry 0-10 lbs.: Frequently 2.5 - 5.5 hours daily Lift/Carry 10-20 lbs.: Frequently 2.5 - 5.5 hours daily Lift/Carry 20-50 lbs.: Frequently 2.5 - 5.5 hours daily Lift/Carry 50- over 100 lbs.: Occasionally .25 - 2.5 hours daily Reach Above: Frequently 2.5 - 5.5 hours daily Bend/Stoop: Frequently 2.5 - 5.5 hours daily Use Hands for Pushing/Pulling: Frequently 2.5 - 5.5 hours daily Use Hands for Manipulations: Continuously 5.5 - 8 hours daily Stress Level of Job: Low The statements herein are intended to describe the general nature and level or work being performed by employees, and are not constructed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Further, they do not establish a contract for employment and are subject to change at the discretion of Eberspaecher North America, Inc.