Fabricator jobs in Moon, PA - 55 jobs

MRC Global serves the oil and gas industry across the upstream, midstream and downstream sectors as well as the chemical and gas distribution market sectors worldwide. Job Purpose Help maintain the successful operation of the fabrication shop. Maximize production and create quality products for our customers. Adhere to all written procedures and all safety standards. Key Duties & Responsibilities The Role's responsibilities include, but are not limited to: * Individual must be able to perform the essential duties with reasonable accommodation. * Fabricate new parts for customers. * Perform basic maintenance on machinery. * Perform preventative and predictive maintenance on facility machinery. * Write and maintain standard operating procedures (SOPs) and Job Safety Analysis (JSAs). * Complete daily maintenance and repair logs. * Load and unload pipe. * Palletize products for shipping. * Support and Assist VEMC. * Maintain and secure work tools. * Clean and maintain work area. * Turn off and lock out equipment when not in use. * Communicate with shop lead for daily workload. * Provide on-the-job training to new employees. * Perform other duties as assigned. * Be available for on-call after-hours service * Communicate with sales team on existing and upcoming projects. * Perform quality control procedures. * Take reasonable care for the safety and health of yourself and others. * Report workplace hazards, injuries, or illnesses immediately. Required Experience * High school diploma or a GED (General Education Degree). * Vo-Tech Training or equal experience in welding and fabrication Skills & Abilities * Knowledge in the following areas: assembly, parts, ability to read and understand specifications, quality control, and safety. * Working knowledge of PVF products and basic welding function with carbon and stainless-steel pipe. * Experience using one or more of the following tools: horizontal band saw, cutting and threading machine. * Ability to set up and operate machinery such as pipe bending machine. * Ability to read and interpret specifications required by customer. * Ability to read and understand standard tape measure. * Overhead crane and sit-down forklift experience preferred. * Manual dexterity required for operating machinery and computers. * Must be able to complete fabrication certification after training. Working Conditions * Ability to work in warehouse conditions exposed to various elements of temperature and noise (non-climate controlled). * For additional position-specific details regarding the physical and mental demands and working conditions, contact Human Resources. * Reasonable accommodation may be made to enable individuals to perform essential functions. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. California Employee Data Collection Notice

JENNMAR Services, a well-respected industrial construction/maintenance company, is currently seeking Experienced Millwrights, Welders and Fabricators for Travel Work. Quality and service are the core principles of our company and we prioritize excellent relationships with our clients. **THESE POSITIONS ARE BOTH FULL TIME TRAVEL POSITIONS WITH COMPETITIVE PAY, BENEFITS AND PERDIEM AND LOCAL POSITIONS** **MUST BE ABLE TO TRAVEL EACH WEEK TO VARIOUS LOCATIONS** Benefits for Experienced Millwrights, Welders, Fabricators: Perdiem/hotel Health, Dental, Vision Paid Time Off 401(k) with matching after 6 months Job Responsibilities for Experienced Millwrights, Welders, Fabricators: Follow instructions from supervisors and/or crew foremen while maintaining all safety standards Perform various physical duties assigned Move, secure, install, build, load and/or unload materials, tools and equipment Welding and fabrication for repairs and install of plant equipment, chutes and crushers Properly repair and install mechanical parts for equipment Read schematics and instruction manuals to make equipment repairs if needed Stick Weld and use Oxy/Act torches safely and efficiently Use hand tools and power tools safely and efficiently Clean/prepare job site Assist skilled tradespeople in their duties Properly, efficiently and safely apply types of oils and greases according to specification of equipment/job Job Requirements Experienced Millwrights, Welders, Fabricators: Must be 18 or older Ability to routinely climb stairs, ladders and/or platforms, bend and squat Ability to walk, stand or sit for prolonged periods of time Ability to consistently lift and/or move up to 50 pounds throughout the shift Able to work any shifts, including overtime, weekends and holidays required. Ability to pass background and drug & alcohol testing required. MSHA Surface and Underground certifications a plus JENNMAR Services, our employees are our most important assets and is committed to them with competitive pay and a comprehensive benefits plan, including 401(k). We are consistently employing individuals in the Coal, Oil & Gas, Construction, Manufacturing and Industrial industries.

Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Welder I Location: Equipment & Assembly Plant - Pittsburgh, PA Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) - Generous Company Match! Perks: Incentives/bonus plans, competitive pay, dress for your day, hybrid schedules, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hours of work: Mondays - Fridays, 9:00 AM - 5:00 PM, 40 Hrs/Wk - 3 shift operation An entry level position under the supervision of the E&A supervisor or group leader, the Welder I will perform all functions under this job description. This includes all necessary functions to maintain a clean and safe shop. The Welder I will comply with all Company and Safety Policies and procedures in the performance of assigned duties. The Welder I performs tack welding and finish welding of piping systems utilizing both SMAW, FCAW, and GMAW welding procedures. Certification to CCC procedures is required. The Welder I welds vessels and structural components utilizing SMAW, FCAW, and GMAW welding processes. Performs these procedures to meet CCC certified procedures. The Welder I inspects own work to ensure compliance to drawings and weld procedures and makes necessary repairs. The Welder I will operate Fork trucks, jib cranes and overhead crane after training. The Welder I assist in other areas of the plan as assigned. Duties and Responsibilities (not limited to) Complying with company policy Material handling/movement Welding Qualifications High school diploma or general education degree (GED) is required Associates degree (A.A.), or equivalent from two-year college or technical school is preferred 2-3 years welding experience is required ASME code welding is preferred About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR hgdd VNRQs8

Job DescriptionPosition: Welder (FCAW & GTAW) Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec's rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2-4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec's safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. *Must pass pre-employment weld tests administered in accordance with Holtec's WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com . Candidates interested in considering a career at the Company should submit their resume' along with at least three references. Powered by JazzHR lURiZtQf7b

We're looking for a skilled, motivated Welder who isn't afraid to get their hands dirty and take ownership of their work. If you're experienced in welding, fabrication, and repairing used equipment, enjoy working independently, and take pride in doing the job right, we want to hear from you! At Mid-Atlantic, you won't just be welding-you'll help get our customers' equipment back to great condition. From repairing worn parts to fabricating and assembling components, your days will be hands-on, varied, and rewarding. If you're ready to GEAR UP for success and join a team that values excellence, teamwork, and technical expertise, we want to hear from you! We offer perks like: $1,500 Sign-on Bonus! (Paid in two installments at 90 and 180 days) $250 Quarterly Tool Allowance $200 Annual Boot Allowance Work-Life Balance: Monday-Friday schedule (NO WEEKENDS) Company-provided uniforms Competitive Hourly Pay (NO FLAT RATE) Ongoing training and professional development Benefits: Competitive pay based on experience and skill level, ranging from $23-$33 per hour. Skill level is assessed by the hiring manager during the in-person interview. Excellent benefits, including Medical, Dental, Vision & more Generous Paid Time Off: Accrue two weeks of PTO during your first year 401K with company match Employee referral program Employee assistance program As a Welder, you will: Weld, repair, and fabricate used equipment as needed Maintain a safe and organized workspace Take initiative and complete tasks independently Perform other welding-related tasks as assigned What qualifications are we looking for? Strong hands-on welding and fabrication experience Experience repairing used equipment Must have your own tools, including a welding helmet Valid driver's license and ability to pass a DOT physical Ability to use hand tools, power tools, and measuring devices Physical Requirements: Ability to frequently kneel, bend, squat, push, pull, and reach Must be able to lift and move up to 50 lbs. without assistance Must be able to get into and out of various vehicles without assistance Must pass a DOT physical including drug screening Comfortable working in small or tight spaces We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Gaven Industries manufacturers highly engineered systems for electromagnetic pulse shielding. Our diverse customer base is spread across multiple agencies at 1000's of customers worldwide. We are looking for an experienced GTAW Welder/Fabricator to join our team. The GTAW Welder/Fabricator will be responsible for the welding of various metal components and products as specified by layout, welding diagram, drawings or work order utilizing knowledge and experience with GTAW/TIG welding on steel, aluminum, stainless steel, and other metal materials. The GTAW Welder/Fabricator also inspects completed work for conformance to specifications and performs minor maintenance to equipment. Responsibilities Weld components in the flat, vertical or overhead positions Perform a series of progressive welding operations to drawing tolerances and specifications Read and understand detailed drawings for weldments, including solid comprehension and interpretation of weld symbols and complete work to customer requirements and specifications Examines weld after, and repairs cracks and fills holes Perform grinding as necessary to support welding process: welding, welding repair or clean-up May use torch for metal cutting Communicate effectively with fellow operators, supervisors, engineers and management personnel Work with other team members to develop fixturing, process drawings, and tooling requirements Examine and inspect the first article produced to ensure conformance Process and complete all required QC documentation and records Responsible for maintaining the integrity of welding equipment, fixtures and tooling Keep all work areas clean, organized and safe Other duties as assigned Knowledge, Skills, Abilities: Ability to perform in process measurements and record data accurately Able to properly use and read tape measures and other measuring devices to monitor performance and inspection of parts Possess solid math skills, good mechanical problem-solving skills, and attention to detail Able to perform physically demanding work: standing, bending, and lifting 50 lbs. regularly Education / Experience Requirements: High School Diploma or General Education Degree (GED) Experience with AWS D1.1 welding procedures required GTAW/TIG welding experience required Minimum of 2 years experience performing responsibilities similar to those described above.

Job DescriptionNow Hiring multiple experienced MIG / Stick Welder positions - 2nd Shift $23.70 / hr We're hiring 2nd Shift MIG / Stick Welder positions for a respected Canonsburg manufacturer of power transformers: 2:30 PM - 11 PM Your role as a MIG / Stick Welder: Lay out and fabricate materials per engineered drawings and sketches Perform MIG, TIG, Overhead, and Flux welding with precision Hand-burn, grind, and shoot studs according to blueprints Operate cranes, forklifts, and manlifts safely and efficiently Work as part of a team building essential infrastructure components MIG / Stick Welder Requirements: Proven welding experience Ability to read blueprints and follow technical drawings Skilled with heavy equipment (cranes, forklifts, manlifts) Attention to detail, safety, and quality What You'll Get as a MIG / Stick Welder: $23.70 / hour to start Path to full-time employment Medical, Dental, Vision, Disability and Life insurance Through 24 years of grit, drive and hustle, our veteran-led staffing firm has helped over 300,000 Associates find work. Commercial Employees has 9 offices across Pittsburgh, Charleston and Charlotte, and is ready to help you take the next step in your welding career. #hmgwil By responding to this post you agree to receive calls, AI-generated calls, text messages, or emails from Commercial Employees and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy: ***************************************************

To set-up, adjust and operate welding equipment to produce high quality products to required specifications. Essential Responsibilities: Possess comprehensive demonstrable knowledge of MIG and TIG welding on steel, aluminum, stainless steel, etc.; Perform a series of progressive welding operations to drawing tolerances and specifications; Read and understand detailed drawings for weldments, including solid comprehension and interpretation of weld symbols and complete work to customer requirements and specifications; Work from WPS and follow required processes; Be capable of working independently from shop or customer supplied prints, comprehensive understanding of B.O.M.'s; Capable of fitting and welding per print independently with minimal supervision; Be capable of meeting AWS certification requirements of D1.1, D1.2 D1.3, D1.6 and D1.9; Must have ability to perform in process measurements and record data accurately; Responsible for maintaining the integrity of welding equipment, fixtures and tooling; Perform a variety of general maintenance and shop work required or other duties as assigned by supervisor; Responsible for keeping clean, orderly and safe work areas; Adhere to Employee's responsibilities outlined in Cygnus' Health & Safety Policy. Additional Skills & Responsibilities: High School Education with Vo-Tech or Technical School background or equivalent; Must have 3-5 years of welding experience; Knowledge of sheet metal and welding techniques and methods; Excellent mechanical ability is highly desirable; Experience in other fabricating processes is beneficial; Must be able to stand for long periods of time and engage in pushing/pulling actions; Must be available to work up to 10 hours of overtime per week; Ability to work in a manufacturing shop environment (including hot, cold and/or noisy areas); Frequent hand to finger, handle, feel objects & tools, walking, sitting, reaching, stooping, kneeling, crouching, talking and hearing; Physically submit to periodic drug tests (employment is contingent upon favorable results). Equal Opportunity Employer/Minorities/Women/Disabilities/Protected Veterans

Job Description As a welder at SMS Group you will be able to analyze the assignment and determine the most effective procedure. The welder assembles, fits, tacks, and welds a variety of complex fabrications and assemble. You must be able to work in a team environment, as well as solo on projects. The right candidate will possess written and verbal skills, reasoning, math and language skills, and be able to follow all safety protcol. . Who we are At SMS group, our people are our greatest asset. We offer an entrepreneurial environment that promotes a culture of innovation, growth, and inclusion. We offer company events, activities, and opportunities to participate in charitable initiatives that benefit the communities where we are located. **************** What you'll do Work from drawings, sketches, and a minimum of instruction. • Assemble parts in proper sequence, place bracing in correct location to minimize distortion. • Perform welding operations such as arc, MIG, TIG brazing and burning in all positions on a variety of metals. • Operate drill press to make parts for fabrication. • Utilize crane and material handling equipment. • Use precision measuring tools. • Follow instructions and established procedures. • Record measurements, record pertinent information as required. • High school diploma or GED preferred. • Read and interpret prints, including welding prints • Weld per SMAW, GMAW, GTAW standards; vertical up, vertical down, and horizontal • Plasma arc cutting • Air carbon arc cutting • Pipe bending, fitting, welding, and threading • Use horizontal and vertical saws, torch, and cut off wheel • Set up and operate all welding machines, be able to do basic troubleshooting • Set up and operate all machines in the fabrication area, be able to do basic troubleshooting What we offer Competitive compensation, medical/dental/vision coverage, paid vacation, paid holiday time, 401k with a company match, training, a tuition reimbursement program and more! What we do SMS group is the leading partner in the world of metals. We are an original equipment supplier offering comprehensive maintenance and spare part services for metals production, continuous casting and rolling (flat and long products), tubes, welded pipes, forging, non-ferrous technology, and heat treatment plants - all from a single source. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. Employment is contingent upon successful completion of a drug screen and physical capacity profile test.

Welder Who is IX? From breaking ground to the finished project, our team has been laying the groundwork for excellence on heavy civil construction and demolition projects for over 60 years. We combine innovations of industry with decades of successfully completed projects, proving we are a value-added partner from the ground up! Over six decades, Independence Excavating has established a team of construction professionals that sets us apart from other contractors. What do we believe in? PEOPLE: Provide a safe, family-oriented environment. Commitment to integrity. Protect our most valuable assets. PERFORMANCE: Always deliver the highest quality. Find solutions. Provide value to our partners. COMMUNITY: Positively impact the communities we serve. Give back. Leave the world a better place than we found it. A Welder is responsible for various functions including, but not limited to: Operates metal fabrication equipment in compliance with company operating procedures using Stick, MIG, and TIG welding Proficient in Carbon Arcing Operating Oxygen and Acetylene torch, Plasma Cutting Experience working with AR, and Hard facing materials. Read and interpret blueprints Strong mechanical aptitude Ability to read measuring tools Ability to follow work orders and work in teams Keep all work areas clean and organized Other duties as assigned Do you have what it takes? High School Diploma/GED required 2-3 years of experience preferred Work must be performed carefully and with great accuracy Must be able to use simple/basic math, and basic hand-held measuring tools Lift or carry over 50 pounds Operate tools, equipment and machinery with caution to prevent damage or injury to self or others Follow policies, procedures, work methods, directives and work rules established by Company management Along with a competitive salary, we offer a comprehensive and rich benefits package. Interested candidates should submit their resume along with salary history and requirements. Independence Excavating, Inc. is an Equal Opportunity Employer and we value workplace diversity and do not discriminate against any employee or applicant because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec's rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2-4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec's safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. *Must pass pre-employment weld tests administered in accordance with Holtec's WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references. High School diploma or GED required. Minimum of 2-4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices.

Welder - 7 am to 3:15 pm Zelienople, PA$18.00 to $22.00 hourly to start Monday to Friday - 7 am to 3:15 pm Temp to Hire Benefits - After probationary period UPMC Medical 70% Paid, dental, vision available. 401K after 1 year with 100% match up to 3%, 50% match up to 5%. 8 paid holidays plus a bonus. Life and Disability Insurance Job DescriptionThe Welder utilizes argon/oxygen welding tools to assemble products according to blueprints and knowledge of welding and metallurgy. The worker prepares the equipment and welds the parts while continually monitoring the quality of the product throughout the process. Essential Duties and Responsibilities Adhere to all safety requirements and protocols. Read work instructions and/or blueprints to confirm production/assembly information and pieces have been tacked correctly. Interpret drawings to determine weld symbols. Perform finish welds to complete assembly. Detect and report defective materials or questionable conditions to the Team Leader or member of the Management Team. Complete job requirements with minimal supervision. Use conventional and precision measuring instruments. Accurately document applicable job, product and quality information utilizing computer and paper documents as required. Maintain the work area and equipment in a clean and orderly condition. Perform preventative maintenance on equipment and tools as required/requested. Focus on quality and speed, performing all tasks with a sense of urgency toward excellence. Other duties as assigned by the Team Leader and Management Team. Qualifications / Education Minimum of a high school diploma and preferably formal training/certification in welding Must receive AWS D1.1 certification within initial 6 months of employment as a Welder at COMPANY Working knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials Knowledge of fixtures and weld set up parameters such as amps, volts, etc. One year of experience welding - preferably in a fabrication shop Must be familiar with all machines required to perform the tasks stated above Ability to operate welding tools We are an EOE.

Welder - 7 am to 3:15 pm Zelienople, PA$18.00 to $22.00 hourly to start Monday to Friday - 7 am to 3:15 pm Temp to HireBenefits - After probationary period UPMC Medical 70% Paid, dental, vision available. 401K after 1 year with 100% match up to 3%, 50% match up to 5%. 8 paid holidays plus a bonus. Life and Disability InsuranceJob DescriptionThe Welder utilizes argon/oxygen welding tools to assemble products according to blueprints and knowledge of welding and metallurgy. The worker prepares the equipment and welds the parts while continually monitoring the quality of the product throughout the process. Essential Duties and Responsibilities Adhere to all safety requirements and protocols. Read work instructions and/or blueprints to confirm production/assembly information and pieces have been tacked correctly. Interpret drawings to determine weld symbols. Perform finish welds to complete assembly. Detect and report defective materials or questionable conditions to the Team Leader or member of the Management Team. Complete job requirements with minimal supervision. Use conventional and precision measuring instruments. Accurately document applicable job, product and quality information utilizing computer and paper documents as required. Maintain the work area and equipment in a clean and orderly condition. Perform preventative maintenance on equipment and tools as required/requested. Focus on quality and speed, performing all tasks with a sense of urgency toward excellence. Other duties as assigned by the Team Leader and Management Team. Qualifications / Education Minimum of a high school diploma and preferably formal training/certification in welding Must receive AWS D1.1 certification within initial 6 months of employment as a Welder at COMPANY Working knowledge of wire and filler materials applications for various steel alloys, aluminum, and some exotic materials Knowledge of fixtures and weld set up parameters such as amps, volts, etc. One year of experience welding - preferably in a fabrication shop Must be familiar with all machines required to perform the tasks stated above Ability to operate welding tools We are an EOE.

Job DescriptionAmerican Bridge Company FABRICATOR Coraopolis, PA - Full Time This is an hourly-rated position at the American Bridge Manufacturing (ABM) facility, shift hours: Monday - Friday, 7:00 am - 3:30 pm. ABM is an AISC Certified Fabricator that supports all heavy civil construction projects for the Southland Holdings family of companies, including American Bridge Company. Senior Welder / Fabricators are responsible for performing a variety of activities related to structural steel fabrication including layout, fitup, welding, grinding, carbon arc, material processing, etc.. Essential Duties and Responsibilities Demonstrated welding experience with at least one, but preferably all, of the following processes: FCAW-G (Flux Core), SMAW (Stick), SAW (Sub Arc). Demonstrated welding experience in welding: carbon steel, aluminum, stainless steel Demonstrated experience with air-arc gouging. Must be able to pass the required welding certification tests for the appropriate processes and positions. Has ability to read and work from a set of project documents (drawings, specifications, and procedures (WPS)). Layout of structural steel weldments from a set of drawings using typical measuring instruments. Bolting of structural steel connections Use of hand tools, including but not limited to: banding tools, drills, taps, grinders, impact wrenches, hydraulic rams, etc. Has knowledge of common equipment and procedures used in a fabrication shop like: forklifts, overhead (gantry) cranes, band-saw, Angle Master, hole punch. Use of rigging for handling structural steel. Conduct pre-shift safety inspection of work area, tools and equipment. The Ideal Candidate Has 5-10 years of experience in steel fabrication. Is detail oriented and values quality workmanship. Is able to think critically about a task and to independently work at completing it within the given parameters. Is safety-oriented and exhibits safe work habits. Working for American Bridge Manufacturing The candidate must be able to legally work in the United States. The candidate must be willing to work in a drug-free environment and agree to a post offer drug test. The candidate must be willing to work safely and keep OSHA recordable incidents to a minimum. The candidate must possess a professional attitude, as well as the willingness to perform the tasks given in order to meet all customer / projects needs. Supervisory Responsibilities None Listed Certificates, Licenses, Registrations To perform this job successfully, an individual must be able to perform each Essential Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Constant physical effort, including standing, is required during a regular work shift of at least eight hours per day, Monday through Friday. Employee must be able to stand for extended periods of time, and to stoop, bend, and crouch as required to perform Essential Duties. Frequently work with hands extended overhead, sometimes in conjunction with the operation of hand power tools. Ability to lift and carry, on a frequent basis, at least 50-90 pounds personally, and up to 150 pounds with assistance. Manual dexterity to hand-carry steel and other fabrication materials, power tools, and hand tools. Work Environment Work is performed indoors. Work environment periodically exposes the employees to high levels of noise, grease, and dust that is typically associated with a steel fabrication shop. Employees regularly works near heavy equipment and moving machinery. Employees must maintain constant alertness to the multiple concurrent activities of the shop, including the activities of other employees, the operation of stationary equipment, and the movement of mobile equipment. Work may involve a variety of substances commonly found in a fab shop such as cutting oil, grease, steel shavings / filings, oxy-acetylene, propane, gasoline, diesel fuel, hydraulic fluid, paint. ABM is a Drug-Free Workplace. EOE Statement American Bridge Company is an Equal Opportunity Employer and employment selection is based on merit, qualifications, and abilities. American Bridge does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, Veteran status or any other characteristics. Powered by JazzHR FNdE5q9Wix

JENNMAR Services, a well-respected industrial construction/maintenance company, is currently seeking Experienced Millwrights, Welders and Fabricators for Travel Work. Quality and service are the core principles of our company and we prioritize excellent relationships with our clients. **THESE POSITIONS ARE BOTH FULL TIME TRAVEL POSITIONS WITH COMPETITIVE PAY, BENEFITS AND PERDIEM AND LOCAL POSITIONS** **MUST BE ABLE TO TRAVEL EACH WEEK TO VARIOUS LOCATIONS** Benefits for Experienced Millwrights, Welders, Fabricators: Perdiem/hotel Health, Dental, Vision Paid Time Off 401(k) with matching after 6 months Job Responsibilities for Experienced Millwrights, Welders, Fabricators: Follow instructions from supervisors and/or crew foremen while maintaining all safety standards Perform various physical duties assigned Move, secure, install, build, load and/or unload materials, tools and equipment Welding and fabrication for repairs and install of plant equipment, chutes and crushers Properly repair and install mechanical parts for equipment Read schematics and instruction manuals to make equipment repairs if needed Stick Weld and use Oxy/Act torches safely and efficiently Use hand tools and power tools safely and efficiently Clean/prepare job site Assist skilled tradespeople in their duties Properly, efficiently and safely apply types of oils and greases according to specification of equipment/job Job Requirements Experienced Millwrights, Welders, Fabricators: Must be 18 or older Ability to routinely climb stairs, ladders and/or platforms, bend and squat Ability to walk, stand or sit for prolonged periods of time Ability to consistently lift and/or move up to 50 pounds throughout the shift Able to work any shifts, including overtime, weekends and holidays required. Ability to pass background and drug & alcohol testing required. MSHA Surface and Underground certifications a plus JENNMAR Services, our employees are our most important assets and is committed to them with competitive pay and a comprehensive benefits plan, including 401(k). We are consistently employing individuals in the Coal, Oil & Gas, Construction, Manufacturing and Industrial industries.

Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. ASME Welder Location: Equipment and Assembly Facility - Pittsburgh, PA $28.78 to start with a wage step progression plan Eligibility to receive a $1,000 new hire retention bonus ($500 payment at hire and an additional $500 payment after successfully completing 6-months of employment) Tool Allowance Program: New employees hired as a Welder II will be offered a 30-day period following their hire date to submit a one-time reimbursement up to $250 for the purchase of tools Excellent Benefits : Medical, dental, prescription & vision, HSA & retirement savings (401k) - Generous Company Match! Perks : Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hour of work: Schedule flexibility to work in rotating shifts - Must be able to work a 3 shift rotation Under the supervision of the E&A supervisor or group leader, the technician will perform all functions under this job description. This includes all necessary functions to maintain a clean and safe shop. Complies with all Company and Safety Policies and procedures in the performance of assigned duties.Welds all vessels (including large ASME) and structural components utilizing SMAW, FCAW, SAW, GTAW and GMAW welding processes. Performs these procedures to meet CCC certified procedures. (These may include ASME, API, AWS, and ANSI code certification.) Materials may include carbon steel, stainless steel and various other nickel-based alloys. Duties and Responsibilities (not limited to) Able to pass non-destructive testing of pressure retaining welds, on both pipe and vessels Works from drawings/sketches to determine weld size, weld location and weld process Inspects own work to ensure compliance to drawings and weld procedures and makes necessary repairs Assist with incoming parts inspection and final product inspection and complete appropriate documentation Operate Fork trucks, jib cranes and overhead crane Complete ASME code weld log documentation daily Comply with company policies Material handling/movement Welding Assist in other areas of the plan as assigned Specific qualifications for this technology welding role include: A High School diploma or Trade School certification is required Capability to obtain ASME section 9 in GTAW, GMAW, and FCAW certification while Employed 2 years of experience welding on pressure vessels and FCAW welding process is required CCC procedures certification About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

Job DescriptionNow Hiring multiple experienced MIG / Stick Welder positions - 2nd Shift $23.70 / hr We're hiring 2nd Shift MIG / Stick Welder positions for a respected Canonsburg manufacturer of power transformers: 2:30 PM - 11 PM Your role as a MIG / Stick Welder: Lay out and fabricate materials per engineered drawings and sketches Perform MIG, TIG, Overhead, and Flux welding with precision Hand-burn, grind, and shoot studs according to blueprints Operate cranes, forklifts, and manlifts safely and efficiently Work as part of a team building essential infrastructure components MIG / Stick Welder Requirements: Proven welding experience Ability to read blueprints and follow technical drawings Skilled with heavy equipment (cranes, forklifts, manlifts) Attention to detail, safety, and quality What You'll Get as a MIG / Stick Welder: $23.70 / hour to start Path to full-time employment Medical, Dental, Vision, Disability and Life insurance Through 24 years of grit, drive and hustle, our veteran-led staffing firm has helped over 300,000 Associates find work. Commercial Employees has 9 offices across Pittsburgh, Charleston and Charlotte, and is ready to help you take the next step in your welding career. #hmgwil By responding to this post you agree to receive calls, AI-generated calls, text messages, or emails from Commercial Employees and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy: ***************************************************

As a welder at SMS Group you will be able to analyze the assignment and determine the most effective procedure. The welder assembles, fits, tacks, and welds a variety of complex fabrications and assemble. You must be able to work in a team environment, as well as solo on projects. The right candidate will possess written and verbal skills, reasoning, math and language skills, and be able to follow all safety protcol. . Who we are At SMS group, our people are our greatest asset. We offer an entrepreneurial environment that promotes a culture of innovation, growth, and inclusion. We offer company events, activities, and opportunities to participate in charitable initiatives that benefit the communities where we are located. **************** What you'll do Work from drawings, sketches, and a minimum of instruction. • Assemble parts in proper sequence, place bracing in correct location to minimize distortion. • Perform welding operations such as arc, MIG, TIG brazing and burning in all positions on a variety of metals. • Operate drill press to make parts for fabrication. • Utilize crane and material handling equipment. • Use precision measuring tools. • Follow instructions and established procedures. • Record measurements, record pertinent information as required. • High school diploma or GED preferred. • Read and interpret prints, including welding prints • Weld per SMAW, GMAW, GTAW standards; vertical up, vertical down, and horizontal • Plasma arc cutting • Air carbon arc cutting • Pipe bending, fitting, welding, and threading • Use horizontal and vertical saws, torch, and cut off wheel • Set up and operate all welding machines, be able to do basic troubleshooting • Set up and operate all machines in the fabrication area, be able to do basic troubleshooting What we offer Competitive compensation, medical/dental/vision coverage, paid vacation, paid holiday time, 401k with a company match, training, a tuition reimbursement program and more! What we do SMS group is the leading partner in the world of metals. We are an original equipment supplier offering comprehensive maintenance and spare part services for metals production, continuous casting and rolling (flat and long products), tubes, welded pipes, forging, non-ferrous technology, and heat treatment plants - all from a single source. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. Employment is contingent upon successful completion of a drug screen and physical capacity profile test.