Lathe set up person jobs near me

A precision machining company in the Cincinnati area is seeking a skilled ProtoTRAK Lathe Operator to join its first-shift team. This position involves full setup and operation of ProtoTRAK lathes in both manual and CNC modes, including conversational programming, tooling changes, and producing high-quality parts to print. The ideal candidate will have strong machining experience, attention to detail, and the ability to work with minimal supervision in a clean, organized shop environment. **Key Responsibilities** + Perform complete setup and operation of ProtoTRAK lathes, both manual and CNC. + Use conversational programming to write simple programs directly at the machine. + Select appropriate tooling for drilling, tapping, cut-off, and turning operations. + Control feeds and speeds to produce accurate parts while minimizing secondary operations. + Produce parts from raw material to print or company specifications, ensuring clean and burr-free finishes. + Read and interpret blueprints and engineering drawings. + Inspect parts using precision measuring devices such as micrometers, calipers, and optical comparators. + Perform routine cleaning and maintenance; follow lockout/tagout procedures. + Adhere to all safety regulations and company policies related to attendance, labor reporting, and housekeeping. + Operate additional machines as required by the Supervisor. **Qualifications** + Experience operating and programming ProtoTRAK lathes (manual and CNC). + Ability to write conversational programs at the machine. + Strong blueprint reading and inspection skills. + Knowledge of tooling selection and machining fundamentals. + Ability to work independently and maintain accuracy with minimal oversight. + Physical ability to bend, stoop, stand, walk, and lift light materials throughout the shift. **Benefits:** + **Medical insurance** + **401(k):** Offered + **Paid holidays** + **Standard PTO package** + Stable, long-tenured shop with low turnover **Equal Employment Opportunity** This employer is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, or any other protected characteristic. **Pay Details:** $20.00 to $25.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance **Massachusetts Candidates Only:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

IronRoad is conducting a confidential search for a 2 nd Shift Live Tool Lathe Operator for our Fairfield, Ohio client. We are looking for someone with a great vibe who comes to work and takes care of business. Detail oriented, focused and wants to be part of a great team. Sound like what you are looking for? Contact us! Hours: Monday - Thursday 5:00 p.m. - 3:00 a.m. Pay Range: $20.00 - $35.00+ per hour based on your skill & experience. Determined by Hiring Manager Shift Differential - $2.00 per hour for 2nd shift Location: Fairfield Ohio 45014 Job type: Full time General Description: The Live Tool CNC Lathe Operator is responsible for the setup, operation, and maintenance of Doosan CNC lathes equipped with live tooling and Fanuc controls to produce precision-machined components. This position plays a critical role in maintaining part quality, machine performance, and overall productivity on the second shift. Candidates must demonstrate a strong understanding of multi-axis turning operations, blueprint reading, tool setups, and in-process inspection techniques. The ideal candidate will be a self-starter who can work independently, troubleshoot minor issues, and contribute to a team-focused manufacturing environment. Reports to: Production Supervisor Responsibilities: • Set up and operate Doosan CNC lathes with live tooling, Y-axis functionality, and Fanuc controls. • Read and interpret engineering drawings, blueprints, and GD&T to ensure machining to spec. • Perform tool changes, set offsets, and make minor G-code edits to maintain tolerances. • Conduct part inspections using precision measuring tools (micrometers, calipers, height gauges, indicators, etc.). • Monitor machine performance and adjust machining parameters for efficiency and tool life. • Ensure parts meet quality and dimensional standards throughout production runs. • Complete required documentation including job travelers, inspection sheets, and production logs. • Collaborate with programming, engineering, and quality teams for troubleshooting and process improvements. • Maintain a clean, safe, and organized work area in accordance with 5S and company safety standards. Qualifications • High school diploma or equivalent required; technical training or machining certificate preferred. • Proficiency in blueprint reading and using standard inspection tools. • Familiarity with G-code programming and ability to make minor edits and offsets at the machine. • Strong understanding of speeds, feeds, cutting tools, and basic machining principles. • Ability to work independently with minimal supervision on second shift. Preferred Qualifications • Minimum 2 years of experience operating CNC lathes, preferably Doosan with Fanuc controls and live tooling. • Experience operating lathes with sub-spindles and Y-axis features. • Background in high-mix, low-volume production environments. • Familiarity with ISO 9001 or AS9100 standards and quality control procedures. • Forklift or overhead crane experience/certification a plus. Physical Requirements • Ability to stand for long periods, lift-up to 50 lbs., and handle repetitive tasks. • Manual dexterity and visual acuity required for precision measurements and fine detail work. Shift & Compensation • Second Shift: • Shift differential may apply • Competitive hourly wage based on experience • Overtime opportunities available Benefits • Health, dental, and vision insurance • 401(k) with company match • Paid holidays and PTO • Training and advancement opportunities Questions: Are you authorized to work in the USA? Do you have reliable transportation to get to and from work? Do you have your high school diploma or equivalent technical training or machining certificate? Required Are you Proficient in blueprint reading and using standard inspection tools? Have you used G-code programming and can you make minor edits and offsets at the machine? Do you have a Strong understanding of speeds, feeds, cutting tools, and basic machining principles? Can you work independently with minimal supervision on second shift?

SummaryResponsible for operating equipment in department safety and producing quality products per documentation. Perform quality checks, changeovers, SAP data entries, and troubleshooting. Ensures compliance with BD quality systems, policies, procedures and best practices, and all local, state, federal and BD safety regulations, policies and procedures. Regular, punctual attendance is an essential job function. Ability to read and write and converse in English. Willing and able to uphold BD Values.Job Description We are the makers of possible BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. Duties/Responsibilities: Work as one of a team for maximum effectiveness and optimal task methods, which includes product inspection, operating equipment, raw material and finished goods movements and clean room area and equipment cleaning / sanitizing Perform visual inspections Perform troubleshooting of equipment Perform changeovers, line clearance and cleaning Achieve production rate and quality goals on assigned equipment Facilitate continuous operation of the equipment through breaks Perform rework Cross train where needed within the department to support the business Maintain all quality and GMP standards Perform needed SAP data entries May require the use of 10x microscope, calipers, and/or other miscellaneous gauges Participate on blitz teams as assigned Achieving established production goals Ensuring the quality of all products produced Performing quality checks as designated Ability to function as part of a team Processing SAP and MES transactions for department Assisting in the BDA process to identify root causes Maintain compliance with all required document training Operate lines in a safe and efficient manner Drive department results by reducing downtime and completing tasks in an efficient manner Maximize efficient time usage in the department Ensure assigned equipment is maintained and in working order Continuous learning of the processes and mechanics of the lines Other duties as required to support the needs of the business Education: High School diploma/GED preferred In lieu of High School diploma/GED, three years manufacturing experience is required Experience: Previous manufacturing experience preferred Previous experience with MES preferred Previous experience with precision measuring instruments preferred Previous mechanical experience preferred Knowledge, Skills and Abilities: Work effectively on own, or in a team atmosphere - Proficient Ability to maintain a neat, clean and orderly work area - Proficient Willingness and ability to train others - Proficient Teamwork - Proficient Organization skills, detailed oriented - Basic Ability to speak, read, and comprehend English PCP Level: 3 At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. BD is committed to providing a robust set of value-based programs and resources that are best-in-class, market-competitive and affordable for all associates and their families. Competitive pay Access a portion of your pay before pay day with DailyPay Healthcare coverage: No paycheck contributions for eligible associates under a certain salary threshold enrolled in the HSA Basic Medical Plan option, no matter how many dependents you cover. Preventive care covered at 100%. Dental and vision insurance at group rates. Paid parental leave up to 6 weeks Adoption assistance plan 401(k) plan with 75 cents on the dollar matched by BD up to 6% of compensation Company paid basic life and AD&D insurance Tuition reimbursement Discounted home, auto and pet insurance Paid holidays and vacation (pro-rated the first year based on actual start date) All benefits and policies are subject to eligibility and enrollment requirements. Most coverage begins on your first day or the date you become eligible for benefits. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit ********************** Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics. #earlycareer Required Skills Optional Skills . Primary Work LocationUSA NE - Columbus (West) Additional LocationsWork ShiftNA (United States of America)

About Us: Founded in 2012 Faxon Firearms is a leading manufacturer of high-performance firearms and components, known for quality, innovation and service. We are passionate about craftsmanship and continuously improving our products to meet the needs of both professional shooters and enthusiasts. Our company values collaboration, growth, and excellence, offering a dynamic environment for employees to thrive. Join us in shaping the future of the firearms industry! General Description: The Live Tool CNC Lathe Operator is responsible for the setup, operation, and maintenance of Doosan CNC lathes equipped with live tooling and Fanuc controls to produce precision-machined components. This position plays a critical role in maintaining part quality, machine performance, and overall productivity on the second shift. Candidates must demonstrate a strong understanding of multi-axis turning operations, blueprint reading, tool setups, and in-process inspection techniques. The ideal candidate will be a self-starter who can work independently, troubleshoot minor issues, and contribute to a team-focused manufacturing environment. Reports to: Production Supervisor Responsibilities: Set up and operate Doosan CNC lathes with live tooling, Y-axis functionality, and Fanuc controls. Read and interpret engineering drawings, blueprints, and GD&T to ensure machining to spec. Perform tool changes, set offsets, and make minor G-code edits to maintain tolerances. Conduct part inspections using precision measuring tools (micrometers, calipers, height gauges, indicators, etc.). Monitor machine performance and adjust machining parameters for efficiency and tool life. Ensure parts meet quality and dimensional standards throughout production runs. Complete required documentation including job travelers, inspection sheets, and production logs. Collaborate with programming, engineering, and quality teams for troubleshooting and process improvements. Maintain a clean, safe, and organized work area in accordance with 5S and company safety standards. High school diploma or equivalent required; technical training or machining certificate preferred. Proficiency in blueprint reading and using standard inspection tools. Familiarity with G-code programming and ability to make minor edits and offsets at the machine. Strong understanding of speeds, feeds, cutting tools, and basic machining principles. Ability to work independently with minimal supervision on second shift. Preferred Qualifications Minimum 2 years of experience operating CNC lathes, preferably Doosan with Fanuc controls and live tooling. Experience operating lathes with sub-spindles and Y-axis features. Background in high-mix, low-volume production environments. Familiarity with ISO 9001 or AS9100 standards and quality control procedures. Forklift or overhead crane experience/certification a plus. Physical Requirements Ability to stand for long periods, lift up to 50 lbs, and handle repetitive tasks. Manual dexterity and visual acuity required for precision measurements and fine detail work. Shift & Compensation Second Shift: Shift differential may apply Competitive hourly wage based on experience Overtime opportunities available Benefits Health, dental, and vision insurance 401(k) with company match Paid holidays and PTO Training and advancement opportunities

Job Description What You'll Do As an Acme Set-Up Operator at our Avon Lake facility, you'll play a key role in our manufacturing process by setting up and operating Acme screw machines to produce high-quality components. This role requires mechanical precision, strong attention to detail, and a commitment to safety and quality. Read and interpret blueprints or job orders for specifications, including dimensions, tolerances, and tooling instructions. Install and secure collets, bushings, and stock pushers, load bar stock into feeding mechanism. Install and adjust cams, gears, and stops to control tool and stock movement. Position and secure tools in holders; set cutting speeds and feed rates as required. Cycle machines through settings and make necessary adjustments for performance and part accuracy. Start machines, monitor operations, and perform first-piece inspections to verify conformity to specifications. Submit conforming first-piece parts to Quality for approval. Follow interval-based part checks and documentation processes. Operate machine and follow 2-pan system procedures. Replace or sharpen worn tools using a bench grinder. Maintain a clean, organized, and safe work area. Perform additional duties as assigned. What You'll Bring Experience operating and setting up Acme screw machines or similar production equipment. Ability to read and interpret technical drawings and manufacturing documentation. Strong mechanical aptitude and experience with hand tools and measuring instruments. Commitment to product quality, safety, and continuous improvement. Ability to follow structured processes and maintain accurate records. A proactive approach and flexibility to adapt in a fast-paced manufacturing environment. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. You should be proficient in: Experience in a Manufacturing Environment Blueprint Reading

Top Job Located in Cleveland, OH Salary: $20-$25 an hour Stamping Press Set-Up Technician (Metal Stamping) Pay: $20-$25 per hour Schedule: Monday-Thursday, 6:00 AM-4:30 PM We are seeking an experienced Stamping Press Set-Up Technician with strong knowledge of large progressive dies and metal stamping press operations. This is a full-time, first-shift role ideal for candidates with hands-on experience in industrial metal stamping environments. Key Responsibilities (Unchanged) Perform set-ups for large progressive dies in large metal stamping presses Set dies in stamping presses and produce samples to specification Complete job set-ups including: Setting/adjusting lubrication systems Adjusting part eject and collection systems Adjusting safety systems Operate basic stamping press equipment Use QC measurement devices and gauges Perform defect identification and produce required documentation Read and interpret blueprints Use precise measuring equipment (calipers, micrometers, plug gauges) Lift up to 50 lbs and perform moderate climbing to adjust dies or materials Required Experience (Unchanged) Solid 2-3 years of experience setting large progressive dies in metal stamping presses Valid experience must be specifically in metal stamping The following do NOT count as valid experience (per your notes): CNC machining Plastic injection molding Basic machine operation on non-metal stamping presses How to Apply Call: 216-###-#### Apply Online: clevelandmetrojobs.com Send Your Resume: ...@expresspros.com #3152ST Express Office: Parma (Cleveland Metro) 5348 Broadview Road Parma, OH 44134

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. 3rd Shift: 10:00 pm-6:00 am Sunday-Thursday (Train on 1st shift 6:00 am-2:00 pm Monday-Friday) Job Description Responsible for visual inspection of wax pattern and dressing of defects, and other various tasks related to pattern manufacturing. Responsibilities: * Visually inspects wax patterns to ensure customer requirements are met * Dress defects using hot torches and hot plates; trims flash; fixes air bubbles; label patterns; assembles parts; applies sealant; keeps work area clean. * Accurately report daily production quantities Physical and Mental Demands: * Job is performed at a work bench where you have the option to sit or stand. Work requires attention to detail, steady hands, good visual acuity. * Constant use of both upper extremities to inspect, dress, repair, label and seal wax patterns. Frequent use of hand tools; reach / handle activities at waist, knee, shoulder, overhead. * Push/lift 10-35 lbs All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

Your Key Responsibilities * Set up of operating machines including first checks and test sequences * Oversee ramp up of machines after setup procedure and support Operators in operating the machines * Support maintenance in the repair, prevention of downtime and inspection of machines * Follow documented procedures and processes and maintain accurate records and tracking * Check finished product/product component and submits for approval * Follow all safety and production rules and ensure proper use of personal protective equipment (PPE) at all times Your Qualifications Required: * High school diploma or GED equivalent * Ability to use instruments for measuring and to identify defects * Ability to follow written and verbal instructions in English * Ability to operate basic machinery * Good visual acuity * Ability to lift medium-heavy objects if required * Applicants must be authorized to work in the US without employment visa or other sponsorship Preferred: * Minimum of one (1) year of experience operating machines in a manufacturing environment * Experience working with power tools

A manufacturing company is seeking an individual, who can set-up and operate Wire EDM Machine, to join their team. Work hours are Monday through Friday from 7 a.m. to 3:30 p.m. Job Responsibilities: Select, align, and secure fixtures, wire, and work pieces on machines as necessary to machine parts as required Load and edit CNC programs as required Utilize knowledge of linear axes and use G&M Codes Program, operate, and maintain Wire EDM utilizing knowledge of working properties and processes for a variety of materials Develop and implement process recommendations for improved efficiency to optimize the programs and processes Verify conformance of finished work pieces to customer specifications, using precision measuring tools and equipment, as necessary Document actions by updating control charts, travelers, and ERP labor reporting Clean the work tank, table, and wire path pulleys on a daily basis Analyze and interpret operation sheets, blueprints, and mechanical drawings to produce products that meet or exceed customer specifications Accomplish organizational goals by accepting ownership for new and different requests and explore opportunities to add value to job accomplishment Follow all company policies and procedures, including proper PPE Maintain a safe and clean work environment by performing daily housekeeping duties

TempToFT Job Title: CNC Mill/Lathe Operator/Set-up Pay Rate: $20-24 PER HOUR BOE Hours: Monday through Thursday 6AM-430PM Occasional OT on Friday 6am-430pm Job Description: Job Summary: Set up & operate CNC Mill/Lathe to change, load/unload & produce parts Responsibilities: • Monitor & maintain equipment such as lubricant & cooling levels • Apply basic concepts of Alegra & Geometry • Avidly interpret Blueprints Physical Requirements: LIFTING: ENVIRONMENT: 1-20LBS STANDING, PUSHING PULLING Work Environment: o PACE OF ENVIRONMENT: MED o LEVEL OF SUPERVISION: HIGH o LEVEL OF INTERACTION WITH OTHERS: MED o ABILITY TO HANDLE MULTIPLE TASKS: MED o LEVEL OF EXPERIENCE REQUIRED: HIGH o TRAINING PROVIDED: LIMITED Location: Akron Dress Code: STEEL TOED SHOE/BOOTS CNC Mill & Lathe Operations. $20- $24 per hour BOE Essential Duties and Responsibilities include, but are not limited to, the following: • Operate programmed machinery to change, load/unload, and produce parts to specified design. • Monitor the feed and speed of machines during the machining process. • Inspect items as instructed and provide feedback to management to ensure any quality defects can be avoided in the future. • Inspect parts per blueprint as instructed. • Ability to apply concepts of basic algebra and geometry. • Monitor and maintain lubrication and coolant levels / points. • Clean up job site after work and return equipment and tools. • Supply own basic hand and measuring tools. Requirements / Competencies Expected: • Ability to read blueprints • Must demonstrate job responsibility consistency • Requires the ability to read and follow detailed written and/or verbal instructions • Demonstrate eagerness to learn different part/machine setups and operations. • Must demonstrate regular attendance 20.00 Qualifications High School Minimum 2 YEARS

Summary : Responsible for running lathe machines. This involves tasks related to set-up, machine operation, and disposing of chips as required. Tools and Equipment: lathes, variety of cutters and hand tools, chip pushers, steady rests, cranes, shovels, scale, tape measure, and brooms. This list is not all inclusive. Job Functions and Functional Job Task Elements Task 1: Lathe Operation Responsible for turning necks, facing, centering, etc -finishing lathe-smaller finer cuts-customer centers, etc. An overhead crane is used on these machines to set rolls and take out chip boxes. The employee can hook up the chain for the chip box, by squatting to the level of the chain and not having to lift it to place it on the crane hook. Finishing Lathe- the employee needs to make an average of 4 tools changes per shift on this machine. Based on the design of the machine, the tool change is made between knee and waist level, and some have easier leverage than others. They weigh between 10-40#s and are handled on an infrequent basis per hour. Once set-up is completed, the employee runs the machine using automatic controls between waist and chest level with minimal coordination of bilateral hands. When the machine is running, the employee is only required to supervise the operation and dislodge chips on an occasional to frequent basis per hour. Chips are pushed by climbing on 2 steps and using a chip pusher to dislodge the chips while using a partial squatting motion in the standing position. Chips can also be pushed from a vertical position at ground level and this mostly involves using bilateral arms. Some lathes do not have hydraulics to move the rolls on the machine. The rolls have to be locked or unlocked from their location by using a variety of cranks, wrenches, etc. This involves increased use of bilateral upper extremities with twisting of the trunk. Need to be able to push and pull with at least 50#s of force to use the tools. To apply drivers to roll may be required to lift up to 90# waist level to neck of roll several times each month. Rough Lathe-needs to be able to lift a 50# tool without a jib crane and place it at 28 inches off the floor from the left side and make sure it fits in the slot for the tool. There is only a space of 2 feet on the side of the insert, so that the employee would not be able to stand in front of it and perform this task. Also need to be able to handle a chip pusher that is 10 feet and 8 inches long and weighs 15# on an occasional to frequent basis per hour. Need to be able to push chips that are approximately 12 feet away. Dual Compound -the cutters on this machine need to be mounted twice the number of times as a regular lathe as they cut from both ends. The parts are mounted sideways from the right and the left. On one side the part is mounted 25 inches off the floor from approximately 2 feet away and from 6 inches away on the other side. Do not need to use a chip pusher on this machine as they move into the underground bin by themselves, but the employee needs to be able to use a broom to knock them down with minimal force on an infrequent to occasional basis per hour. Note: This job description is not intended to be all-inclusive. The employee may be required to perform other duties as assigned. If you meet the requirements above and are interested in joining our team, please apply with your updated resume. We look forward to reviewing your application! Requirements Shift: 8 hours regular shifts and 12 hours over-time shifts. Breaks: 30 minute lunch. . Flooring: Cement, wooden platforms, grates, rubber mats. Environment: Machine shop environment. Need to be careful with other employees while moving overhead cranes in the vicinity. Safety Equipment: Hard hat, gloves, safety glasses, and steel-toe shoes. Strength Range: Medium-Heavy strength range.

Job Responsibilities: Setting up dies, making adjustments, changing or taking out dies as jobs conclude. Making sure dies are secured, tight and running safely and precisely to produce quality parts. Checks first five parts of every run and measures against Statistical Process Control Charts to be sure they are meeting all the required specifications and are free of any blemishes, marks, etc. Gage to proper standards of that Product Center (i.e: PC4 -Last piece, Mylar, end Mylar). Runs product. Assists Die Setter B or A on major changeovers as needed. Maintains a clean and safe work environment at all times. Other job duties as assigned by supervisor. Education, Skills and Experience: Ability to do Statistical Process Control Charts (SPC); linear measuring; problem solving; math and blueprint reading; and pay attention to detail. Basic computer skills. Prefer experience in die setting and training in: Statistical Process Control, Linear Measurement, Problem Solving Training, High Lift Training and Die Setter Training Classes. CBT safety trainings, Safety Inspection Authorized Lockout/Tag out, Factivity, Paging System, Crane and Hoist. License, Certification or Special Requirements: Work Environment and Physical Demands: The work environment and physical demands described here are representative of those that an employee will encounter to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Plant environment, subject to dust, dirt, cleaning solvents, some chemicals and uncomfortable environmental temperatures at times. While performing the duties of this job, the employee is required to do essential tasks including, but not limited to: Bending, Carrying, Climbing, Coordination (eye/hand & hand/foot), Driving (high lift), Hearing, Holding, Inserting, Lifting (50 lbs.), Locking & Unlocking, Opening & Closing, Pounding, Pulling & Pushing (1000 lbs.), Reaching, Reading, Removing, Seeing, Stretching, Stooping, Standing, Threading, Turning & Twisting, Walking and Writing. Must be able and comfortable entering tight spaces around machinery. Must be able to climb in and out of die area which is located inside the press. Non-essential physical tasks may include the following: Cleaning, Collating, Dialing, Filing, Folding & Unfolding, Maintaining, Scheduling, Sorting, Speaking, Sweeping, Stapling, Turning Pages and Welding. Personal Protective Equipment (PPE) must be worn including but not limited to: eyes, ear, foot and/or other protective devices as required.

Focused in short-run and custom Stamping and Fabrication, this east side of Cleveland organization has over 125 different machines while serving dozens of different industries. This means all employees can expect stability, growth opportunities, and career development with a high variety of products to be produced. Position Overview: The Set-Up Operator will be responsible for the full set-up and production run of various sized single hit punch presses. Duties will include press operation, visual inspection, and safety checks. Additionally, Set-Up Operators will perform basic performance maintenance of equipment between jobs to ensure they are ready to be used for the next job. Key Responsibilities: Accurate position and alignment of dies in machines Produce and qualify first piece with support from QC Technician Set and adjust clamps, rods. Assemble nests. Visually inspect parts and isolate non-conforming parts Ensure safety procedures are followed consistently Requirements: Proven experience setting up a single hit punch press Ability to interpret blueprints Basic Quality tool proficiency - micrometers and calipers Experience with thinner metals (1/4" or less) highly preferred Basic understanding of metal types Equal Opportunity Employer Statement: We are an Equal Opportunity Employer and do not discriminate based on race, ancestry, national origin, color, religion, sex, age, marital status, sexual orientation, disability, veteran status, or any other protected classification under the law.

Western/Scott Fetzer Company As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Who We Are Western Enterprises, now part of the Marmon family, has been delivering excellence for over 60 years. We specialize in high-quality compressed gas solutions-from essential fittings to advanced manifold systems-designed and built in Ohio. We're a company fueled by innovation and dedication to quality, serving industries across the globe. Our team thrives on collaboration, continuous learning, and a shared mission to make a difference. What You'll Do As an Acme Set-Up Operator at our Avon Lake facility, you'll play a key role in our manufacturing process by setting up and operating Acme screw machines to produce high-quality components. This role requires mechanical precision, strong attention to detail, and a commitment to safety and quality. * Read and interpret blueprints or job orders for specifications, including dimensions, tolerances, and tooling instructions. * Install and secure collets, bushings, and stock pushers, load bar stock into feeding mechanism. * Install and adjust cams, gears, and stops to control tool and stock movement. * Position and secure tools in holders; set cutting speeds and feed rates as required. * Cycle machines through settings and make necessary adjustments for performance and part accuracy. * Start machines, monitor operations, and perform first-piece inspections to verify conformity to specifications. * Submit conforming first-piece parts to Quality for approval. * Follow interval-based part checks and documentation processes. * Operate machine and follow 2-pan system procedures. * Replace or sharpen worn tools using a bench grinder. * Maintain a clean, organized, and safe work area. * Perform additional duties as assigned. What You'll Bring * Experience operating and setting up Acme screw machines or similar production equipment. * Ability to read and interpret technical drawings and manufacturing documentation. * Strong mechanical aptitude and experience with hand tools and measuring instruments. * Commitment to product quality, safety, and continuous improvement. * Ability to follow structured processes and maintain accurate records. * A proactive approach and flexibility to adapt in a fast-paced manufacturing environment. * Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. What You'll Gain * Competitive pay and 401(k) with company match * Health, dental, and vision insurance * Flexible spending and health savings accounts * Company-paid life insurance * Opportunities for career growth, training, and skill development * A key role in manufacturing precision components that make a global impact * A supportive, collaborative, and respectful team culture Bring your precision, dedication, and focus to a role that helps shape high-performance products. Apply today and become part of the Western team in Avon Lake-where precision meets purpose. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

OGS Machining is a CNC Job Shop that is currently looking for a full-time CNC Lathe Setup position for 1st Shift. Standard shop hours are (4) ten-hour days - Mon-Thurs. 6:00am - 4:30 pm, with occasional overtime on Fridays as needed. OGS Machining is a medium-volume, production job shop whose average machining order is 100 - 500 pcs. 75% of our jobs are made from bar stock with the remaining 25% are machining castings or billet. All parts can easily be held in your hand, no cranes or material handling equipment are necessary. The majority of our CNC turning equipment is less than 4 years old, and state-of-the-art. We are actively growing and acquiring new customers and new work - our goal is to more than triple our sales and capacity within a decade. Job Summary Responsible for set-up, programming and operation of CNC lathes from 2-axis chuckers to 9-axis mill-turn machines. Essential Functions Setup CNC lathes for production machining. Prove out and inspect first piece for each setup. Troubleshoot, edit, and optimize existing programs to ensure efficient overall production. Assist other operators in the department as necessary. Document new program changes and processes to ensure setups can be duplicated and overall production time is optimized. Oversee the quality of parts produced in the machining cell. Efficiently manage tooling and workholding inventory for the department. To be proactively aware of work load and plan tooling requirements for future jobs ensuring minimum downtime. To make most efficient use of machinery and equipment, including the use of proper feeds and speeds, cutter compensation and modern programming strategies. Inspect and deburr parts to ensure they meet blueprint specifications using proper measuring instruments. Take ownership of the quality of parts you produce. Help produce jigs and fixtures that improve productivity Use skill and caution to prevent damage to machinery and equipment (crashes, etc) Perform basic preventative maintenance on machinery, and keep your work area clean and tidy. Follow all safety policies and procedures. Perform other duties as assigned. Skills and Requirements At least 5 years experience of working unaided on setting up and operating multi-spindle / multi-turret CNC lathes in a job shop environment. A solid understanding of CNC programming structure, tooling theory, and speeds / feeds for various materials. Fluency in reading and writing G&M code. CAM programming experience is a bonus. Previous experience with Fanuc controls preferred. Previous experience with Doosan turning and machining centers is helpful (but not required) - we own a twin-turret Puma TT2100SYY, and a sub-spindle Lynx 2100LYSB, both with Y-axis and live milling. Must be able to identify critical blueprint dimensions and how to inspect/ check these critical dimensions. Strong GD&T skills a plus. Possession of own measuring tools / gages is a plus - our QC department can provide gages as needed, and will calibrate any/all personal gages owned by the employee. Ability to work on a wide variety of complex parts from drawings. Ability to change and adapt work behaviors based on a constantly changing production schedule. Must be dependable and detailed oriented. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time. OGS Machining is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability or veteran status. No Third Party Calls Please.

FC Precision, a subsidiary of FC Industries, is seeking a skilled Vertical Turning Lathe (VTL) Machinist to join our growing team! FCP is a leading provider of high-quality industrial tools and equipment, specializing in aerospace and Department of Defense. With a strong commitment to innovation, reliability, collaboration, and customer satisfaction, we've built a reputation as a trusted partner for some of the most advanced companies in the world - including NASA, SpaceX, GE, and many more. At FC Precision, your work contributes to cutting-edge projects that push the boundaries of technology - from space exploration and government missions to aerospace engine components and beyond. But it's not just about what we make - it's about who we are. We take pride in our positive, team-oriented culture, where every employee is valued and supported. We believe in investing in our people, providing opportunities for growth, development, and long-term success. When you join FCP, you're not just taking a job - you're growing your career with a company that truly cares about your goals and your future. Here are some of the reasons it's great to be a CNC Machinist at FC Industries! · Competitive Pay · Family/ team culture that values communication and growth · Flex start time to accommodate your family · Great Medical/ Dental/ Vision · Heating and Air Conditioning in the whole building, including the shop! · 401k Retirement Plan with strong company match · Immediate PTO and Holiday Pay · Company discounts through Verizon, Chrysler, GM and Working Advantage · On-site wellness coaching and YMCA discounts · On-site cafe/ convenience store · Fun perks such as gift cards, 50/50 drawings, Queen of Hearts, picnics, holiday parties, employee appreciation days... and more! Essential Functions as a VTL Machinist: · Setting production machinery for acceptable production processes and obtaining run approval. · Analyzes machine, tool and equipment problems and makes basic repairs, as well as handling process maintenance. · Continuous improvement of operating methods and procedures designed to eliminate operating problems, increase productivity, and improve product quality. · Inspect work pieces for conformance to specifications visually or using gages or templates and adjust the machine to correct errors or to reduce process variation. · Perform repetitive and custom work where fixtures, machine stops, indexing devices, and machining tools are utilized to control critical tolerances and dimensions. · Validate set-up and quality as needed to meet critical tolerance limits and customer specifications. · Maintaining and establishing records and documentation of all types as required. · Ensure all safety guards and personal protective equipment are always in place. · Follow Work Instructions, procedures, and company policies. · Other duties as required. Requirements Qualifications for a Vertical Turning Lathe Machinist: · Thorough knowledge of specific department equipment and their processes. · Able to read, write, and comprehend written and oral instructions · Able to monitor machine sounds to identify and diagnose changes to take appropriate action. · Minimum 3-5 years CNC Vertical Turning Lathe experience Physical Requirements for a Vertical Turning Lathe Machinist: · Ability to walk, push, reach overhead and bend to the floor. · Ability to exert up to 10 pounds of force regularly. · Ability to perform repetitive movements over an extended period. · Ability to repeatedly lift objects weighing up to 10 pounds; objects up to 25 pounds occasionally. Salary Description $28 - $34 per Hour

At Globus Medical, we move with a sense of urgency to deliver innovations that improve the quality of life of patients with musculoskeletal disorders. Our team is inspired by the needs of these patients, and the surgeons and healthcare providers who treat them. We embrace a culture of exceptional response by partnering with researchers and educators to transform clinical insights into tangible solutions. Our solutions improve the techniques and outcomes of surgery so patients can resume their lives as quickly as possible. **Position Summary:** As an Associate Machinist, you will produce machined parts by programming, setting up, and operating a computer numerical control (CNC) machine. Work from blueprints, process sheets and sketches to perform production tasks, which may include the cutting and shaping of metal to precision dimensions, may make tool adjustments as necessary. Check and inspect machining operations against specified tolerances, including maintaining quality and safety standards. May identify and repair minor machine malfunctions. **Essential Functions:** + Maintains organization, cleanliness, and housekeeping within the work area and reports any maintenance issues encountered + Assists with basic computer numerical control (CNC) machine set-up + Verifies conformance of finished work-piece to specifications using various measuring tools such as: CMMs, calipers, micrometers, comparators, and vision systems + Utilizes work orders, blueprints (GD&T), sketches, written and verbal instructions to complete required tasks + Loads and unloads parts onto the machine; ensures the tools with the machine match those on the tool list + Enters information into Camstar manufacturing platform (MES); creates and submits machine status reports + Confers with production personnel to resolve basic machining problems + Performs other duties as assigned + Adheres to the letter and spirit of the company Code of Conduct, the AdvaMed Code, MedTech Code, and all other company policies + Ensures Compliance with applicable governmental laws, rules, and regulations, both in the United States and internationally, by completing introductory and annual training and maintaining knowledge of compliance as it applies to your role + Represents the company in a professional manner and upholds the highest standards of ethical business practices and socially responsible conduct in all interactions with other employees, customers, suppliers, and other third parties _Reasonable accommodations may be made to enable individuals with disabilities to perform these _ essential _functions._ **Qualifications:** + Ability to read, understand and interpret blueprints with GD&T + Works with team to build and sustain a safe and friendly working environment + Stays on task and ensures current day scheduled work is completed on time + Typically requires less than 1 year of related experience + Requires High school diploma or GED **Physical Demands** **:** The physical demands listed here are representative of those that must be met by an employee to successfully perform the essential functions of this job. + Required to sit; climb or balance; and stoop, kneel, crouch or crawl + Required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds + Required to possess specific vision abilities, including close vision, distance vision, color vision, peripheral vision, depth perception and capacity to adjust focus **Our Values** **:** Our Life Moves Us philosophy is built on four values: Passionate About Innovation, Customer Focused, Teamwork, and Driven. + **Passionate about Innovation** : Improving patient care by delivering advanced technology to our customers is at the core of what we do. We are passionate in our role in improving the lives of patients by continuously developing better solutions. + **Customer Focused** : We listen to our customers' needs and respond with a sense of urgency. + **Teamwork** : Working together, anything is possible. We value every person on our team and treat each other with respect. We are accountable to one another and support each other. Together, we make each other stronger. + **Driven** : We pursue our mission with energy and passion. We are nimble, results-oriented and decisive. We overcome obstacles that arise in our quest to deliver solutions that will improve the lives of our customers and patients. **Equal Employment Opportunity** **:** Globus Medical is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, age, disability, marital status, pregnancy, national origin or citizenship. We are committed to a diverse workforce. We value all employees' talents and support an environment that is inclusive and respectful. **Other Duties** **:** Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

DRT Precision Manufacturing, LLC is a leader in the precision machining industry and provides quality components and superior support. This highly skilled workforce utilizes innovative technology and sophisticated systems to produce high quality parts. If you enjoy a dynamic, growing, and challenging workplace- DRT is just what you are looking for. We are currently seeking candidates for our Sidney, Ohio location for: Lathe Machinist- 1st Shift! Base + Off Shift Incentive - Flexible Schedules Responsibilities Set up and operate complex, precision jobs with minimal supervision CNC Programming, Editing and Set Up A PLUS Hold size and profile tolerances within .0002 Perform first piece in process inspection using standard measuring equipment such as micrometers, calipers, height gauges and dial gauges Ensure all standard quality procedures are followed such as machine set-up, operation, inspection, documentation and material handling Maintain clean, organized and safe work environment following all safety standards and requirements. Perform preventative maintenance tasks as required Qualifications High School diploma or equivalent education and experience required 1-3 years of CNC with operation or machining experience Demonstrated skill working in a team environment Experience with Lean Manufacturing a plus DRT is a dynamic and growing organization that offers competitive compensation and excellent benefits including PTO and MEDICAL COVERAGE FROM DAY ONE! In addition to dental insurance, disability and (voluntary) life insurances, we offer a 401k with company match and Discretionary Bonus Incentive eligibility. DRT is An Equal Opportunity Employer

1st and 2nd Shifts Available!!! Safely and effectively setup and operate CNC Lathes, manufacturing precision hardware from blueprints and existing programs. PRINCIPLE RESPONSIBILITIES include, but not limited to, the following: • Complete all setups and efficiently run moderate to very complex parts on CNC Lathes following detailed setup instructions. • Must consistently demonstrate the ability to meet critical engineering specifications as shown on engineering prints. • Must be capable of interpreting complex engineering drawings. • Demonstrate the ability to identify processes improvements and incorporate necessary changes. • Must be capable of developing well documented setup sheets, tool lists and other associated documentation necessary for efficient manufacturing of machined parts. • Communicate with Manufacturing Management Staff and Machinists for shift change over and process requirements. • Perform routine PM on machines (I.E. grease, oil, coolant, filters). KNOWLEDGE/EXPERIENCE/SKILLS: Minimal requirements for education, knowledge and experience: • High School graduate or equivalent. • Minimum of 5+ years' experience setting up and operating CNC Lathes, machining various types of materials. • Strong math skills. • Must be able to read and understand machine programs • Display strong communication skills and be capable of working from verbal and/or written instructions with minimum supervision. • The individual must perform his/her duties in conjunction with EHS personnel, in such a manner that neither he nor others are jeopardized in regards to safety. PHYSICAL/MENTAL DEMANDS AND WORKING CONDITIONS: This position requires the ability to perform the essential duties and responsibilities in the following environment: • Individual must be capable of occasionally lifting 50lbs and standing for extended periods of time and capable of climbing stairs. • Required use of personal protective equipment (PPE), including eye protection, hearing protection, hand and foot protection or other specific PPE as required. • Work with or around various oils, coolants and other common machine shop chemicals. • Must be able to speak English and work in team environment. This position description has been prepared to assist in defining job responsibilities, physical demands, working conditions and skills needed. It is not intended as a complete list of job duties, responsibilities and/or essential functions. Stolle Machinery Co, LLC retains and reserves any or all rights to change, modify, amend, add to or delete from any section of this document as it deems, in its judgment, to be proper. Additionally, Stolle Machinery Co, LLC is an equal opportunity employer and does not discriminate on the basis of race, color, religion, age sex, national origin, disability, or veteran status.