Rm Systems jobs in Reno, NV - 12208 jobs

Job DescriptionSalary: $25-$30 Equipment Operator Underground Construction Department: Field Type: Full-Time About the Role The Equipment Operator is a skilled field position responsible for safely operating construction equipment while actively supporting underground utility and civil work. This role is for operators who understand that operating equipment is part of the job and that supporting the crew through labor tasks is expected. Equipment Operators are expected to take ownership of the equipment and vehicles they operate and treat company assets with care. What Youll Do Safely operate excavators, mini excavators, loaders, and other construction equipment Support underground utility installation, trenching, backfill, and site restoration work Exit equipment as needed to assist with labor tasks and crew support Work closely with spotters and crew members during excavation activities Perform pre-use and post-use inspections on equipment and vehicles Complete daily inspection reports and required documentation Follow job plans, grade requirements, and foreman direction Maintain clean, organized, and safe jobsites Treat all equipment, tools, and vehicles with care and respect What Success Looks Like Here You operate equipment safely and with full situational awareness You are willing to labor when needed and support the crew without hesitation You take pride in the condition, cleanliness, and operation of equipment and vehicles You communicate clearly with spotters, foremen, and crew members You identify hazards and speak up before issues occur You respect job schedules, plans, and quality standards You are reliable, accountable, and trusted on active jobsites RequirementsRequired: Valid drivers license with a clean driving record Minimum one year of construction equipment operating experience OSHA 10 certification Ability to work outdoors and perform physical labor Ability to follow job plans and direction with situational awareness Preferred: Experience operating excavators, mini excavators, loaders, backhoes or similar equipment Experience supporting excavation activities around live or existing utilities by locating, identifying, and verifying utilities, establishing traffic control when required, assisting with trenching and excavation, and ensuring utilities are protected throughout the work Ability to read construction plans and understand grades and elevations Underground utility or heavy civil construction experience Bilingual preferred; must be able to read, write, and speak English and be comfortable using basic computer and mobile technology What We Offer Steady, full-time work Safety-first culture Ongoing training and skill development Opportunity to advance into senior operator or leadership roles Competitive pay based on experience How Hiring Works Apply through our system. Qualified candidates will receive a phone screen followed by an in-person interview.

About Architectural Resources is an independent agency representing top tier exterior building product manufacturers in the commercial building sector. Our growing company is searching for experienced candidates for the full-time position of architectural sales representative. The architectural sales representative will promote the company and its products to architects, specifiers, designers, engineers, contractors and owners in the Los Angeles, Orange, Riverside & San Bernardino markets. Responsibilities · On the road position, meeting with customers 3-4 days per week. · Project tracking & follow up. · Architectural meetings & presentations. · Contractor meetings. · Job site visits. · Working in a fast-paced environment demanding strong organizational, technical, and problem-solving skills. · Plan review for bid opportunities. · Collaboration with manufacturers to bid opportunities. · Generation of small types and quantities quotes. · Order write ups to manufacturers for new orders. · Project management: Work with manufacturers and contractors to ensure submittal deliverables are on schedule. · Data entry in CRM. Qualifications: · Minimum of 1-year architectural sales experience. · Technical sales background. · Excellent oral and written communication skills. · Strong work ethic. · Service oriented mentality. Compensation in addition to Base Salary + Commission: · Vehicular Mileage reimbursement. · Cell Phone · Monthly Internet Stipend · Health insurance where the company pays a portion. · Paid Holidays & Vacation Time. · Sick leave.

Join a Team That's Building More Than Projects - We're Building Futures! Join Erickson-Hall Construction Co., a National and Multi-Regional Top Workplace for five consecutive years. We're 100% Employee-Owned - building success through teamwork, innovation, and construction done right by people who care. This position is based in Anaheim, CA. The Director of Business Development (Higher Education) supports Erickson-Hall Construction Co. by driving strategic growth and organizational sustainability through the development and implementation of mission-aligned initiatives. This position plays a central role in translating vision into action by identifying opportunities, building strong relationships and partnerships, and leading the development of high-impact projects that benefit the communities around them. Essential Duties: Leverage, develop and build on current and/or new relationships with higher education institutions. Expand and cultivate a pipeline of growth projects in the higher-education vertical in partnership with the VP of Business Development. Increase our company's visibility and presence amongst key stakeholders through attending and participating in conferences, associations, and other higher-education events. Demonstrate an understanding of higher education facility construction needs, capital plans, campus priorities, and funding methodology. Strategically evaluate potential projects by analyzing project requirements weighed against potential risk and potential profit. Track emerging trends, funding landscapes, and partnership prospects. Other duties as assigned. Knowledge, Skills and Abilities: 7 years of progressive business development and client relationship management experience in the construction market. Ability to represent Erickson-Hall Construction Co. and its services, including conducting presentations and speaking publicly on behalf of the organization. Proven ability to secure construction projects and achieve/exceed revenue goals. Comfortable approaching clients with sales conversations; able to handle impromptu client conversations and unique requests professionally and confidently. Ability to read and interpret construction plans and technical specifications. Adept at working collaboratively with different departments on applicable pursuits (Marketing, Estimating, Pre-con, and Operations). Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: Ability to travel (local travel within Southern CA 50%, outside CA 10%) as needed. Have full range of mobility in upper and lower body. Be able to work in various positions, including but not limited to stooping, standing, bending, sitting, kneeling, and squatting for long periods of time. Ability to lift, push, and pull up to 25 pounds occasionally and as needed. While performing the duties of this position, an employee is regularly required to work indoors, but may be subjected to noise that regularly occurs at a construction site. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Be able to use hands to finger, handle, feel or operate objects, office materials or controls and reach with hands and arms. Benefits Employee Stock Ownership Plan (ESOP) Profit-Sharing 100% employer-paid Health/Dental premiums for team members Generous Vacation and Sick Time off Nine (9) Paid Holidays - Including your Birthday! 100% employer-paid Life, AD&D, and Long Term Disability insurance Retirement plans with company contribution Subsidized tuition on Child Care Health/Dependent care FSA's Making a difference in the communities you serve Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.

Linde is looking for local Class A Drivers in Marshall, MN! Remember to check your CV before applying Also, ensure you read through all the requirements related to this role. Pay Range: $90,000-$108,000 per year General Benefits: Matching 401k (up to 5%), Company paid pension plan, benefits available 1st of the month after start date. Average pay of 103k Paid weekly Home daily Paid delay time 5 day on with 2 consecutive day off schedule Matching 401k (up to 5%) Company paid pension plan Benefits available 1st of the month after start date 15 days of PTO Paid holidays Paid training Uniforms and boots provided The Class A Bulk Tanker Driver position will deliver products to Linde customer sites via tractor trailer tankers. As a critical member of Linde's logistics operation, you will be responsible for safely and efficiently transporting industrial gases such as liquid CO2, while ensuring compliance with all safety standards, laws, and regulations. In this role, you may be required to deliver to government facilities and other locations requiring extensive background checks and compliance with heightened security and safety protocols. The ideal candidate will be dedicated to safety, possess strong attention to detail, and adhere to company protocols related to cryogenic transportation. Key responsibilities include the following: Conduct and report pre-trip and post-trip inspections Trailer coupling and uncoupling (drop and hook) when needed Connect and disconnect transfer hoses, ensuring secure couplings and proper handling of cryogenic tanks, hoses, and fittings. Monitor pressure levels and temperature readings during delivery to ensure safe unloading Ensure adherence to safety protocols during loading, unloading, and handling of cryogenic gases. Ensure hazardous material shipping orders/papers are in accordance with DOT regulations Maintain accurate shipping documentation, logbooks, and records in compliance with DOT and company policies. Identify need for timely vehicle repairs and/or maintenance Maintain a professional partnership with internal and external customers to meet goals and objectives of the business and customer needs Continuously building your knowledge on how Linde's business operates and succeeds to help organization to continue growing Other duties as assigned LGUS offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! Qualifications: Minimum 3 years tractor trailer HS diploma or GED Hazmat and Tanker Endorsement preferred ]Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. The company serves a variety of end markets including chemicals & refining, food & beverage, electronics, healthcare, manufacturing, and primary metals. Linde's industrial gases are used in countless applications, from life-saving oxygen for hospitals to high-purity & specialty gases for electronics manufacturing, hydrogen for clean fuels and much more. Linde also delivers state-of-the-art gas processing solutions to support customer expansion, efficiency improvements and emissions reductions. For more information about the company and its products and services, please visit qualified applicants will receive equal consideration for employment regardless of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, veteran status, pregnancy, or any other protected category. xevrcyc Take the next step in your career today-apply now and drive with Linde!

Redwood Electric Group is looking for a detail-oriented and technically skilled Electrical PV Designer to support our project teams in the design and drafting of photovoltaic and energy storage systems. This role plays a critical part in ensuring the accuracy, efficiency, and code compliance of our electrical designs while collaborating closely with engineers, project managers, and construction teams. About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Duties/Responsibilities Develop electrical single-line diagrams for AC and DC PV systems. Design PV array layouts, considering site conditions, shading, and component options. Perform electrical calculations, including voltage drop, conductor sizing, and inverter loading. Select appropriate PV modules, inverters, combiners boxes, and other system components. Create detailed electrical drawings, including site plans, equipment layouts, and installation details. Ensure compliance with the California Electrical Code (CEC) and other relevant codes and standards. Utilize PV design and Autodesk software and to create accurate and efficient designs. Coordinate with structural engineers on mounting system design and integration. Collaborate with engineers, project managers, and construction teams to integrate electrical designs into overall project plans. Provide technical support during the installation and commissioning phases of PV projects. Stay up-to-date with the latest advancements in PV technology and industry best practices. Required Skills/Abilities Proficiency in AutoCAD, Helioscope, & PVsyst for electrical distribution and PV system layout. Familiarity with California Electrical Code and other relevant codes and standards. Strong problem-solving skills with an analytical approach to electrical system design. Knowledge of PV system components and distribution equipment. Ability to manage multiple projects and deadlines in a dynamic team environment. Effective verbal and written communication skills to collaborate across teams. Contribute to a team environment where your input is valued. Education and Experience Bachelor's degree in Electrical Engineering or a related field (preferred), or equivalent relevant experience. 1-2 years of experience of electrical design for a design-build electrical contractor or engineering firm. Proficiency in AutoCAD MEP. Revit is appreciated. Basic knowledge of Microsoft Office applications. Strong time management, communication, and interpersonal skills. FE (EIT certification) appreciated. LEED project experience appreciated. Working Conditions This position is based in our Santa Clara office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

Who are you? A rock-solid Superintendent that is ready to consistently deliver great outcomes for our client. A high performer who is looking to join a growing organization. A jobsite leader motivated by growing and developing others. Key role responsibilities: - Minimum 8-10 years of construction experience - New building/core and shell as well as occupied renovation experience - Experience with Corporate Interiors, Hospital, Bioscience, Lab and Cleanroom projects - Assumes responsibility on their project for management, scheduling, production, quality and safety - Maintain project safety in accordance with the company's safety policy - Act as the primary leader of subcontractors and field forces on a jobsite - Develop and update the project schedule and prepare three-week schedules on computerized scheduling software - Communicate effectively with owners, designers and engineers - Leads various meetings including morning huddle with weekly trade meetings The successful candidate must have excellent communication skills and an ability to effectively interface with many constituents internally and externally. A team player by nature; this individual must have exceptional organizational skills, the ability to accomplish numerous detailed tasks simultaneously, and readily initiate follow-up with staff and management, as well as having values consistent with the company's long-term reputation and business practices.

A blockchain-based payment company is looking for an early Product Engineer to help partners move money on-chain. You will work with design partners to build production-ready applications. Responsibilities include delivering customer applications, building fullstack solutions, and collaborating with cross-functional teams. The ideal candidate has strong TypeScript skills, and needs to thrive in a collaborative, high-energy environment. This role is perfect for engineers aspiring to take initiative and deliver impactful solutions. #J-18808-Ljbffr

DD Ford Construction is committed to building homes and relationships that last by always doing what's right. To accomplish this goal, we know that we must have all-star players on our team that are committed to the same goal and fit our culture well. We are currently looking to fill some big shoes emptied by a long term team member moving out of state. We are on the search for a Project Manager who is eager to jump in with our Superintendents to collaboratively bring our remodel and new construction projects to successful conclusion. Our culture is built upon developing long term relationships with all of our clients, subs, vendors, and employees, so a legitimate candidate should have these long term growth aspirations. A Successful Project Manager For DD Ford Will: Develop, manage, and maintain client and design team relationships by crafting a 5 star experience through the construction process so that we receive referrals from every project. Collaborates with architects, designers, clients, and our team to manage the evolution of design information from start of construction through project completion. Creates and manages project schedules and budgets with input from Site Superintendents. Conducts weekly construction/design meetings with prioritized agendas to communicate with the client and design team on project schedule, design decisions, and budget. Employment Package Includes: Competitive Salary DOE 401k Match Profit Share Bonus Vehicle Stipend & Gas Card Health Insurance To apply, please send all of the following: Cover letter introducing yourself Resume of skills & experience References with contact information

Electrical Project Manager REPORTS TO: Operations Director WHO WE ARE: If you're tired of being a small player in a big company, Integrated Building Solutions (“IBS”) might be the place for you to be seen, heard, and contribute. We are a small company with a nation-wide reach. We describe ourselves as being weird in an exceptionally good way because we care about doing the right thing for our customers and finding a way to get things done where other companies don't or won't. “We love spending our customer's money, but we hate wasting it.” And the “weird” part is, we mean it. IBS is a nationally recognized specialized general contractor in electrical, fire, and safety. We provide a life cycle of services including consulting, engineering, construction, commissioning, maintenance, and training throughout North America. IBS runs on EOS purely. That means as a member of this team, you will have a leader who: Gives clear directions Makes sure you have the necessary tools Acts with the greater good in mind Delegates appropriately Takes time to truly understand your role and how you can help the company Makes their expectations clear Has effective meetings At a minimum, meets one-on-one with you quarterly Rewards and recognizes your performance ABOUT THIS ROLE: As an EOS “Traction” company (Right Person/Right Seat) the successful candidate is a fully competent electrical project manager with functional knowledge and in-depth experience in commercial construction, including electrical, fire, and HVAC systems. Specific responsibilities include: Project estimating Determining resources (labor, equipment, and materials) from project start to finish Planning to ensure deadlines are met and costs are within budget Oversee/manage field personnel/subcontractors daily Ensure accuracy and consistency; maintain, meet, or exceed construction standards/codes Develop/Maintain customer relationships to secure future work Always searching for new opportunities This role will be accountable for quarterly and annual goals which can pay significant incentive pay: Recognized Gross Profit % Training & Development In-person Customer Interactions ABOUT YOU (RIGHT PERSON): You are the right person in the right seat if you have demonstrated skills that reflect our core values: We CARE, We LISTEN, We ANTICIPATE, We INNOVATE, and We DO. You bring a minimum of three (3) years of experience working for an electrical design build contractor. You have thorough knowledge of the NEC and NFPA 70E, you can produce on-time and profitable projects, and demonstrate the following: Creativity - you are a creative problem solver. Influencer - high level of PM expertise to influence direct reports & clients to sell ideas and shape decision criteria. Humor - our office environment is relaxed yet professional; a good sense of humor is required to fit within the culture. Travel - overnight travel approximately 20% of the time (10 weeks/yr); travel as the job requires. Financial Literacy - a clear understanding of key financial concepts. Group Presentation Skills - deliver training to both prospects and clients. Account Management - this role is forward-facing with clients and ensures client delight. You possess meticulous work habits including close attention to detail, time management, people skills, problem-solving skills, exceptional organizational skills, ability to effectively communicate and present technical information verbally and in writing via Microsoft Office applications (mainly Excel, Word, and PowerPoint). ABOUT YOU (WRONG PERSON): You're looking for a temporary job. You don't want to continue learning. You are easily offended. You don't own reliable transportation. You're nervous about a background check. You can't or won't pass a drug test. You have a driving record with more than a couple minor blemishes. You believe society owes you something. MINIMUM QUALIFICATIONS: Any combination of education and experience that would likely provide the required knowledge, skills, and abilities is qualifying. Education: High School diploma with trade and/or college project management schooling or related field. Experience: Minimum three (3) years working for an electrical design build contractor. BENEFITS: Heath / Dental / Life / LTD 401(k) Safe Harbor PTO Fuel Allowance Mobile Phone Allowance Professional development assistance Airline / Hotel / Rental Car Points Relocation Assistance IBS is an equal opportunity employer and affords equal opportunity to all employees for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status or any other status protected under local, state, or federal laws.

The Principal Fire Protection and Wildfire Compliance Engineer is a highly specialized senior-level technical expert responsible for managing fire and life safety across the utility's infrastructure, with a specific focus on complex technical occupancies, hazardous environments, and comprehensive regulatory compliance. This role combines advanced fire protection engineering with a hands-on tactical understanding of emergency operations and a deep knowledge of specialized fire codes. The engineer will provide authoritative oversight of fire protection plan review and field inspections, integrating technical requirements into the utility's broader wildfire and property loss control strategies. Key Responsibilities Regulatory Plan Review and Enforcement Lead the fire protection plan review process for all utility facilities and construction projects, including those with special technical occupancies (e.g., generation plants, advanced control centers) and hazardous environments (e.g., fuel storage, chemical treatment facilities). Serve as the primary liaison with fire marshals, regulatory bodies, and other authorities having jurisdiction (AHJ) during plan reviews, inspections, and enforcement actions. Develop and maintain a robust system for tracking regulatory compliance, corrective actions, and documentation across all fire protection activities. Hazardous Environment and Special Occupancy Loss Control Conduct advanced risk assessments and loss control evaluations for special technical occupancies and areas with hazardous materials, identifying potential fire ignition sources, propagation risks, and mitigation measures. Specify and review the design of specialized fire suppression systems, detection systems, and fire-resistant construction for these high-risk areas, ensuring compliance with relevant NFPA standards (e.g., NFPA 30, NFPA 850) and OSHA requirements. Evaluate potential environmental impacts and associated regulatory reporting requirements related to fire and hazardous materials incidents. Utility and Wildfire Fire Operations Provide expert guidance and operational readiness evaluation, drawing on fire operations experience to inform the utility's wildfire response plans and procedures. Collaborate with internal and external fire agencies on pre-incident planning, tactical response strategies, and incident command system integration. Conduct post-incident analysis for fires impacting special occupancies or hazardous environments, using findings to drive improvements in engineering, procedures, and training. Program Evaluation and Risk Modeling Assess the effectiveness of the utility's Fire Prevention Plan (FPP) and Wildfire Mitigation Plan (WMP), particularly as they apply to hazardous environments and special occupancies. Manage and evaluate the use of wildfire risk modeling software and operational tools, incorporating specialized data related to hazardous materials and facility vulnerability. Cross-Functional and Executive Reporting Act as a technical subject matter expert for executive leadership and legal counsel, providing clear and concise report on fire protection compliance, loss control, and risk exposure. Lead cross-functional teams involving engineering, operations, safety, and environmental departments to ensure seamless integration of fire and life safety requirements. Qualifications Experience 10+ years of progressive experience in fire protection engineering, including extensive experience with regulatory plan review, field inspections, and loss control. Proven experience conducting fire and hazardous materials risk assessments in industrial or utility settings, particularly involving special technical occupancies and high-hazard environments. Demonstrated experience in fire operations, with a deep understanding of incident command, emergency response, and firefighting tactics. Expert-level knowledge of NFPA codes and standards applicable to utilities and hazardous environments (e.g., NFPA 30, 70, 850, 101). Education and Certification Bachelor's degree in Fire Protection Engineering, Electrical Engineering, or a related field. Master's degree preferred. Professional Engineer (PE) license is required. Certified Fire Protection Specialist (CFPS) is highly desirable. Skills Expert knowledge of fire science, hazardous materials behavior, electrical systems, and relevant regulatory codes (e.g., NFPA, OSHA, EPA). Advanced proficiency in plan review processes, inspection protocols, and fire investigation techniques. Exceptional written and verbal communication skills, with the ability to convey complex technical and regulatory information to diverse audiences, from field crews to executive leaders. Ability to balance technical requirements, regulatory mandates, and operational realities in a high-risk environment. Working Conditions Regular travel for inspections approximately 25% of the time. The role involves a mix of office-based work and significant fieldwork in diverse and potentially hazardous environments. The position demands flexibility and may require irregular hours during fire events, emergencies, and regulatory deadlines. #J-18808-Ljbffr

Job DescriptionSalary: Yardman Schedule: Full-Time | On-Site Reports To: Equipment Coordinator & Mechanic Lead At R Construction, were more than an underground utility contractorwere a team that lives our values every day: Do the Right Thing, Care, Make It Happen, Live with Urgency, Grow or Die, and Clear Communication. As we grow, were investing in people and infrastructure, including the shop and yard that keep our operations moving smoothly. Were looking for a hands-on, motivated Yardman who takes pride in keeping operations running seamlessly behind the scenes. This isnt just a support roleits a critical position that ensures our crews have what they need, when they need it, and that our yard and shop stay organized, safe, and efficient. Why Youll Love This Role: Be an essential part of a growing company and see the direct impact of your work Hands-on work with equipment, tools, and materialsno two days are the same Opportunity to learn mechanical skills and grow into shop support or technician roles Work in a team-focused, value-driven environment where reliability and initiative are recognized Key Responsibilities: Keep the yard and shop clean, organized, and hazard-free Manage tool, equipment, and material storage, staging, and transportation Assist with loading/unloading deliveries and moving trailers or equipment Conduct routine inspections for cleanliness, damage, and proper usage Support tool and equipment check-in/check-out processes Maintain shop safety equipment: spill kits, fire extinguishers, and signage Help with basic mechanical tasks under supervision (fluid changes, greasing, cleaning) Stage equipment and materials for job mobilization and ensure outgoing loads are secured Support equipment pickup/drop-off coordination with field crews Qualifications: 13 years of experience in yard, shop, warehouse, or construction support roles Valid drivers license with a clean driving record Comfortable operating forklifts, skid steers, and utility vehicles (training available) Physically able to lift 50+ lbs and work outdoors in all weather conditions Safety-focused, reliable, detail-oriented, and proactive Able to take direction, work independently, and support multiple team members Preferred Skills: Experience with small engine or light equipment repair Familiarity with OSHA yard/shop safety standards CDL or forklift certification (or willingness to obtain) Mechanical aptitude or interest in growing into a shop/technician role Join Us! If you take pride in keeping operations moving smoothly, enjoy hands-on work, and want to grow your skills in a value-driven, supportive environment, wed love to meet you.

Seeking a top-tier Project Engineer for high-end residential construction. Are you looking for a challenge and opportunity to grow? Are you interested in working on architecturally-driven, high-end residential projects throughout Northern California? FORMA Construction, an award-winning firm, seeks a motivated, detail-oriented Project Engineer to help our clients build their dream homes. The Project Engineer role is a critical hub for FORMA. In coordination with the Project Manager and the Superintendent; the PE works closely with clients, architects, designers, subcontractors, and other vendors. The PE tracks progress and updates budgets while keeping the project well-documented and running smoothly ensuring that our clients are informed and consulted every step of the way. Success in this role is measured by your ability to maintain project documents like RFI's and Submittals among other tasks within Procore while maintaining good relations with our clients, vendors, and other stakeholders. At FORMA, our Mission is the continual development of our people and processes to create lasting relationships built on integrity, partnership, and craft. Our core values are based on Urgency, Ownership, Communication and Craft. FORMA's clients and work sites take us throughout the greater Bay Area, building a range of styles and requirements, but all our projects share the same level of dedication, detail, and communication. Our Project Engineer will ensure that our clients receive the best possible service, while continuing to build their experience in project management. Responsibilities: Assist with document control including RFI's, submittals, subcontractor bids and documentation, change orders, schedule updates, drawings, and meeting minutes. Ensure projects and subcontractors are properly set up in Sage and Procore. Coordinate with Superintendent to ensure daily logs, photo documentation, and required postings are correct and up to date. Interface with City and County government in relation to permits, parking, and inspections. Coordinate on site project set up, ensuring basic office supplies, safety equipment, required postings, toilets and utilities are in place for the project. Schedule, set agendas, produce documentation and logs, and take notes for project meetings. Manage and update punch list for project. Assemble close out package for clients at the end of the project, including Maintenance and Service information and schedule. Participate in weekly Maintenance and Service meeting, schedule all maintenance, and distribute service schedule to the service team. Regularly interface with clients, answering questions, keeping them up to date on their projects, and contacting them about needed maintenance and service on their completed projects. Requirements: Construction project management experience preferred Degree in a related field. Valid driver's license and reliable transportation. Ability to speak, read, and write in English. Ability to multitask and handle multiple high priority tasks. Strong written and verbal communication skills. Excellent customer service. Strong computer skills, experience with Microsoft suite, Smartsheet, and Procore. Team-oriented and willing to work with others to achieve results. Ability to work independently. Compensation This is a full-time, exempt role with a salary range of $65-85k annually. FORMA's current benefits package includes: Health, dental, and vision insurance with employer contribution. FSA and commuter benefits accounts. Employer-provided life insurance. 401k with employer matching. Potential annual bonus based on twice yearly employee review cycle. Unlimited PTO policy. Separate paid sick leave of 72 hours per year. FORMA provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Fenceworks is California's Premier Fence Builder with 16+ locations and business units. We employ quality installation teams, sales force and management, which allow us to offer service and quality second to none in the fence industry. At Fenceworks, we pride ourselves on being professional and utilizing the highest quality fence products. We have exemplified a “take care of the customer” philosophy that has made us the top fence contractor in California Fenceworks is currently seeking an inside sales representative with at least three years of sales experience. The sales rep is responsible for identifying and developing home builders and General Contractor relationships and expanding our presence in the market. While not required, our ideal candidate will have fencing or construction sales experience and estimating knowledge and/or experience. Responsibilities · Foster relationships with current home builders and General Contractor customers and new prospects. · Generate prospects through Bid websites (e.g., Building Connected, Bid Mail). · Obtain all required bid documents; including but not limited to site plans, fence specifications, and field measurements. · Provide pricing based on specification and review with Sales Manager. · Present proposal and follow up on bid within a timely manner to address or answer questions or comments. · Maintain communication with superintendents and purchasing throughout job. · Participate in sales meetings, training, trade shows, or other off-site functions as required Qualifications: · At least 2 years of Sales experience · Ideal familiarity and experience in construction-related roles or the fencing industry. · Must be able to prospect effectively and close sales · Basic Microsoft Office skills · Experience with CRM is a plus · Familiarity with Building Connected and Bid Mail is a plus · Excellent interpersonal and communication skills · Pass a pre-employment physical and drug screen · Pass E-Verify Compensation: Total compensation is already composed of base pay + commission structure. Job Type: Full-time Benefits: 401(k) Cell phone reimbursement Dental insurance Employee assistance program Health insurance Life insurance Mileage reimbursement Paid time off Travel reimbursement Vision insurance

Echo Neurotechnologies is an exciting new startup in the Brain-Computer Interface (BCI) space, driving innovation through advanced hardware engineering and AI solutions. Our mission is to deliver cutting‑edge technologies that restore autonomy to people living with disabilities and improve their quality of life. Team Culture Join a small, dedicated team of knowledgeable and motivated professionals. Our early‑stage environment offers the opportunity to take ownership of broad decisions with significant and long‑lasting impact. We emphasize continuous learning and growth, fostering cross‑functional collaboration where your contributions are vital to our success. Position Overview As the Lead Electrical Test Engineer, you will be responsible for planning, coordinating, and executing system‑level electronics testing that demonstrates Echo's BCI devices are safe, effective, and compliant with FDA and international standards. You will lead electrical testing across Pre‑V&V, V&V, and production, ensuring requirements are testable, designing rigorous test protocols, and delivering FDA‑ready evidence for design controls. In addition to verification and validation, you will establish and maintain production test strategies to ensure reliable device manufacturing. With your expertise in electronic systems and test engineering, you will bridge development and operations to ensure Echo's implantable and wearable systems meet the highest safety, quality, and manufacturability standards. Key Responsibilities Define and lead system‑level test strategies across electrical subsystems, integrated device, and system validation. Translate system and design requirements into test protocols with clear, measurable acceptance criteria. Lead Pre‑V&V electronics efforts: bench bring‑up, early feasibility testing, and design‑for‑testability. Direct system‑level verification and validation testing (bench, hardware‑in‑loop, simulated clinical use, IEC 60601 electrical safety). Develop and maintain production test systems: design test fixtures, sockets, automation scripts, and scalable processes for manufacturing. Collaborate with Electrical, Firmware, Systems, QA, and Regulatory teams to ensure compliance with FDA 21 CFR Part 820, ISO 14971 (risk management), and related standards. Liase with System DVT lead, internal teams, and consultants. Generate Verification and Validation Reports, production test documentation, and FDA submission‑ready documentation. Lead failure investigations at system and production level, ensuring root cause analysis and corrective actions are documented and retested. Provide test engineering leadership in support of design transfer to manufacturing and ongoing production quality. Qualifications Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Biomedical Engineering, or related field. 7+ years of experience in electronics/system testing, verification, and validation for medical devices. Proven experience leading component‑level, subsystem, and system‑level test campaigns for Class II or III medical devices (implantable preferred). Experience in designing and scaling production test systems for medical electronics. Strong knowledge of standards and regulations: 21 CFR Part 820 (Design Controls) IEC 60601 (Electrical Safety & EMC) ISO 14971 (Risk Management) IEC 62366 (Usability Engineering) Familiarity with hardware‑in‑loop and system integration test methods. Experience collaborating across disciplines (EE, FW, ME, QA, RA, Manufacturing, external labs). Skills and Abilities Expertise in electronic system test methods: signal integrity, power analysis, EMI/EMC, environmental stress, and safety compliance. Ability to design, implement, and oversee system‑level verification and validation test plans. Proven experience developing and maintaining production test setups, fixtures, and automation for medical device manufacturing. Proficiency with lab equipment: oscilloscopes, spectrum analyzers, DMMs, logic analyzers, power analyzers. Skilled in writing clear, defensible test protocols and reports for regulatory and manufacturing use. Strong organizational discipline in traceability, version control, and change management. Ability to lead cross‑functional test campaigns and manage external test labs/CROs. Excellent communication skills, able to translate test results for engineers, QA/RA, and regulatory reviewers. What We Offer An opportunity to work on exciting, cutting‑edge projects to transform patients' lives in a highly collaborative work environment. Competitive compensation, including stock options. Comprehensive benefits package. 401(k) program with matching contributions. Equal Opportunity Employer Echo Neurotechnologies is an Equal Opportunity Employer (EOE). We celebrate diversity and are committed to creating an inclusive environment for all employees. Confidentiality All applications will be treated confidentially. Applicants may be asked to sign an NDA after the initial stages of the interview process. #J-18808-Ljbffr

Kitchell seeks an experienced and dedicated Senior Project Manager to join our Southern California region in South San Diego, CA and build a long-term career at one of the most innovative and growth-oriented building companies in the United States. Overview Provide onsite PM/CM Services as an owner's representative on three regional Division of the State Architect (DSA) k-12 Education Market Sector projects being executed with the Design-build delivery method. Responsibilities Providing PM/CM Consultant Services for the owner on multiple k-12 projects Ensures operations are executed in accordance with company project management procedures and policies Ensures delivery and adherence to contractual requirements and that all aspects of owner contracts are accomplished Manage the procurement phase and development of RFQs and RFPs Oversight of contracts, drawings, estimates, and specifications to ensure relation and compliance to project requirements Coordinate, direct, and monitor activities of contractors/subcontractors, engineers, architects, and related performing entities Manage project controls, cost, schedule, performance activities, and procedures required by the client Identifies and manages risk on the project, and advises and confers with regional executive prior to implementing risk mitigation actions Actively participates on internal teams that focus on continuous improvement of the company Ensures workplace health and safety policies and procedures are clearly communicated and understood by direct reports and enforces rules fairly and uniformly Qualifications Education and Experience Bachelor's degree in Architecture, Engineering, Construction Management, or related discipline is preferred 12 or more years of experience in the Design/Engineering/Construction (DEC) industry of which a minimum of 5 years as a Project Manager is required Experience as a Project Manager with Design-build delivery method is required Knowledge and Skills Effective presentation skills, ability to develop and deliver presentations to the end users, stakeholders, and board of education is required Proficient user skills with the MS Suite of tools and Bluebeam are required Working knowledge of standard industry tools such as P6 and Procore are strongly preferred Effective verbal and written communication skills to foster and maintain interpersonal relationships is required Provide leadership and financial management support to the project team is required License and Certifications A Design Build Institute of America (DBIA) certification is strongly desired A LEED Professional Accreditation is preferred A Certified Construction Manager (CCM) credential is preferred A valid California driver's license and clean driving record is required Travel Requirements This position has oversight over 3 regional project locations in the same District in South San Diego area of California. Work Environment While performing the duties of this job, the employee must regularly work in an office, an office trailer, and/or in a construction jobsite environment. Conditions regularly include exposure to outdoor elements, hot/cold temperatures, wet conditions, noise, atmospheric conditions, and cramped quarters. The noise level in the work environment is occasionally loud. Physical Requirements While performing the duties of this job, the employee must regularly sit, stand, walk, talk or hear and use hands to finger, feel and handle; frequently reach with hands and arms; occasionally climb or balance and stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. Must frequently lift and or move 10 pounds and occasionally lift and or move up to 50 pounds. ABOUT OUR COMPANY Founded in 1950, Kitchell began as a commercial contracting business and over the years developed new talents and enterprises, acquiring complementary businesses and expertise to remain competitive. Today, Kitchell Corporation serves as the holding entity for several companies that are integral to Kitchell's core business, as well as those that operate independently. We provide a wide range of services within the built environment, including general contracting, construction management, development, facilities management, engineering, architecture, and myriad other services. Our employees manage projects from our main offices located in Arizona, California, and Texas. We offer an entrepreneurial environment that fosters personal and professional growth through in-house education programs, formal and informal mentoring, and cross-training opportunities. At Kitchell, we prioritize internal growth and building careers from within. We consistently rank among the top places to work, thanks to our tenured staff and outstanding benefits that are designed to enrich our employees' physical, mental, emotional, and financial well-being. These benefits include company performance bonuses, discretionary stock options, incentive bonuses, health, and life insurance, health savings accounts (HSA) with wellness incentives, flexible spending accounts (FSA), 401(k) plans with a 4% company match, tuition reimbursement, weight loss programs, discounted auto insurance, identity theft protection, rewards programs, and much more. Kitchell is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status. The annual base salary range for this role is currently $160,000 - $190,000. The Company's salary ranges are determined by role, level, location, and alignment with market data. Individual pay is determined through interviews and an assessment of various factors, including job-related skills, relevant education and experience, abilities of the applicant and equity with other team members. The annual base salary range listed here is subject to change at any time, in the Company's discretion, and does not alter in any way the at-will nature of the employment relationship.

Westland Distributing is a well-established wholesale distribution company and leader in the Manufactured Home parts industry. We are currently looking for a Warehouse Worker / Delivery Driver to help us drive growth in our Las Vegas, NV Branch through supporting efficient operations and providing outstanding service to our customers. The Warehouse Worker / Delivery Driver role is focused on ensuring we consistently meet customer expectations through accurate pulling, packing and shipping of product and ensuring timely delivery of product while completing delivery routes. Warehouse or Driver experience is a must, forklift certified is a plus. This is a hands-on position with direct interaction with customers, vendors and other employees. The amount of time spent in the warehouse versus driving will vary based on the needs of the business. The ideal candidate is hungry, looking to grow their career and shares our core values of delivering outstanding service, knowing our stuff, hustling daily, working as a team, creating solutions and hunting for wins. We offer a fun and friendly business environment, competitive wages, health benefits, vacation, sick leave and 401K. In addition to these benefits you will have career growth opportunities and on the job training. General Job Duties Unloading vendor deliveries by hand and using a forklift for placement in designated locations within the warehouse Pulling, packing and staging of product for shipment or customer pickup Loading Westland delivery trucks by hand and using a forklift Moving inventory and maintaining a clean and safe warehouse environment Using a computer to print out and enter shipping and inventory information Driving heavy duty 2500/3500 truck pulling a 20' & 24' flat bed trailer to execute customer deliveries throughout Northern California Offloading product at customer sites during delivery runs Pulling orders for customers from within the warehouse for in person pickup Driver must be able to pick 75-100 pounds Interacting with customers in a pleasant and supportive manner Special projects within the warehouse as needed Benefits Health Care Plan (Medical, Dental & Vision) Life Insurance (Basic, Voluntary & AD&D) Vacation and Sick Time Short Term & Long Term Disability 401K with Company Match We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job DescriptionSalary: $18-$21 Laborer 1 Underground Construction Department: Field Type: Full-Time About the Role This is hands-on underground construction work. You will support crews installing utilities, trenching, backfilling, spotting equipment, and keeping jobsites safe and productive. If you like physical work, being part of a crew, and going home knowing you did something real, this role may be a good fit. We train the right people. We expect effort, reliability, and a willingness to learn. What Youll Do Support underground utility and trenching work Assist operators and foremen on active jobsites Spot equipment and help identify utilities Load, unload, and stage tools and materials Perform backfill and site cleanup Wear PPE and follow safety procedures at all times Help keep the job moving safely and efficiently What Success Looks Like Here You show up on time and ready to work You work safely and speak up about hazards You follow direction and ask questions when unsure You take pride in doing things the right way You help the crew instead of watching the clock You are open to learning and improving RequirementsRequired: Valid drivers license with a clean record Ability to work outdoors and perform physical labor Willingness to follow safety rules and company procedures Preferred (or willing to obtain): OSHA 10 Underground or construction experience Experience with traffic control or utility locating Bilingual preferred; must be able to read, write, and speak English Basic computer and mobile technology skills for jobsite reporting and communication What We Offer Steady, full-time work Safety-first culture Training and skill development Opportunity to grow into operator or leadership roles Competitive pay based on experience How Hiring Works Apply through our system. Qualified candidates will receive a phone screen followed by an in-person interview.

A blockchain company in San Francisco is seeking a candidate to innovate the Tempo protocol and collaborate with industry experts. The ideal applicant will possess substantial experience in protocol research, particularly regarding consensus and scaling, as well as strong abilities in Solidity. This role emphasizes the design of new features while addressing privacy and efficiency, contributing to the evolution of payment solutions in the crypto space. #J-18808-Ljbffr

Fencecorp, Inc. is a leader in providing high-quality fencing solutions for commercial and light industrial projects. We pride ourselves on our commitment to excellence and our ability to meet the unique needs of our clients, especially within the public works sector. We are seeking an experienced and dedicated Inside Sales Representative to join our team. This role will focus on working directly with public works General Contractors on commercial and light industrial projects. The ideal candidate will have a strong background in the fencing industry for public works projects, though candidates with experience in other sectors within the commercial/light-industrial construction industry will also be considered. Key Responsibilities: - Establish and maintain relationships with public works General Contractors. - Read and interpret project plans and bid documents. - Use Bluebeam software to analyze and break down project plans. - Communicate effectively with vendors and prime contractors. - Participate in job walks and site visits as required. - Prepare and present detailed proposals and quotations for projects. - Negotiate contracts and close sales to meet or exceed sales targets. - Provide excellent customer service and support throughout the project lifecycle. Qualifications: - Minimum of 5-6 years of experience in the fencing industry for public works projects or in the commercial/light-industrial construction industry. - Proficiency in reading and interpreting construction plans and bid documents. - Experience using Bluebeam and Procore software. - Strong communication and negotiation skills. - Ability to work independently and manage multiple projects simultaneously. - Comfortable with job walks and site visits. - Excellent organizational and time-management skills. Preferred Qualifications: - Established network within the public works and commercial construction sectors. - Previous experience working with public works General Contractors. - Strong problem-solving skills and attention to detail. Benefits: 401(k) Cell phone reimbursement Dental insurance Health insurance Life insurance Mileage reimbursement Paid time off Travel reimbursement Vision insurance