Baerlocher USA jobs in Cincinnati, OH - 7005 jobs

Our Outside Sales Engineer is supporting our High Voltage Maintenance business. HVM is an electrical engineering and testing company providing comprehensive testing, maintenance, and engineering services to a variety of industries including utilities, data centers, renewable energy, commercial and industrial industries. This position will report to the Regional Sales Manager covering the Cleveland area and will provide sales and technical support for all the selling resources in that area. The Outside Sales Engineer is responsible for generating new business and maintaining relationships with existing key customers. RESPONSIBILITIES Make regular sales calls on existing accounts and establish relationships with new customers. Make effective customer presentations. Provide proposals or service contracts for HVM's services and repair work. Coordinate and schedule work with Service Center Manager and with customers. Promote sales through active participation in trade shows and professional societies. Work with Business Administrator to develop weekly invoicing and monthly status reports. EDUCATION AND CERTIFICATIONS Bachelor's Degree Engineering, Electrical or Mechanical Graduate of Electrical Technical School Military certification with at least 3 years of directly related work experience will be held as equivalent to the educational requirement. TRAVEL TIME REQUIRED Up to 75% within assigned Cleveland territory Company provided vehicle The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. The anticipated salary range for this role in the Cleveland, OH locality is between $94,800 to $118,450 per year plus Sales Incentive Plan-salary ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process. #LI-HR1 #HVM

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801, Mentor Req ID: 27969 Description Looking for an exciting & rewarding career with a company that is a global leader in its industry? Look no further than Lincoln Electric, a global leader in welding, cutting, and automation that has been a staple in Northeast Ohio for over 126 years! As a Machine-Chemical Operator, you will help deliver world-class products to customers that have trusted the Lincoln Electric brand for decades. By ensuring the production and/or packaging of electrodes or other product components, you will help continue to drive a legacy of proven and trusted products that will help build the world's bridges, skyscrapers, energy pipelines, and more for decades to come. HERE'S A GLIMPSE OF WHAT YOU'LL BE DOING The Core Description - Perform general labor tasks for the production and packaging of products, including placing components or finished products in appropriate bins, mixers, presses or other machinery. Requires the completion of proper labeling and other paperwork related to production and performs quality checks on all assigned work. May perform occasional problem solving or troubleshooting. The Day-to-Day - Work collaboratively with computer-controlled equipment designed for extruding, wire drawing, winding, and packaging materials. Prepare chemical compounds or other components used in the production or assembly process. This may include set-up, operation, monitoring, maintenance, and/or cleaning of equipment. May require mechanical aptitude and spatial ability as well as continuous use of hands including grasping, pushing, and pulling. Following Best Practices - Strictly adheres to quality standards and frequently reads and follows written work instructions and production specifications (e.g., scales, dials or gauges, charts or tables). Understanding, following and enforcing all risk reduction procedures including wearing specified protective clothing and safety equipment where required. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: Min: 63,800 - Mid - 88,800 Bonus Plan:Profit SharingProfit Sharing % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

The Sr. Technical Thermal Sales Engineer, Global Strategic Accounts (GSA) drives the sales of thermal management equipment by providing technical expertise and guidance. This position focuses on reviewing specifications, analyzing mechanical drawings, and collaborating closely with GSA Account Managers to help meet customer needs and drive business growth. RESPONSIBILITIES Review and respond to RFPs for Vertiv thermal management solutions, including specification analysis, mechanical drawing review, and assistance with initial equipment configurations. Support the development of concept thermal designs and provide technical input on product selection, sizing, and schematic layouts. Participate in virtual or in-person design reviews with customers and internal teams. Collaborate with cross-functional teams such as offering management, engineering, and sales to support product development and customer solutions. Prepare technical documentation and project-specific bid forms as needed. Contribute to account planning and customer engagement strategies by providing technical insights. Serve as the SME for Vertiv during customer visits and industry events as needed. Stay informed on industry trends, technologies, and materials to support continuous improvement and innovation. Provide feedback to product managers to help guide product enhancements and future development. Help to foster a culture of innovation and continuous improvement within the department. Provide training and mentorship to less experienced team members. MINIMUM QUALIFICATIONS Bachelor's degree in engineering, business, or related field of study (or equivalent combination of education and experience). 4-8 years of industry technical experience. Experience in leading/managing high profile projects. Technical knowledge of Vertiv's thermal management product portfolio. Deep market dynamics and industry knowledge. Proven track record of influencing engineering accounts. Experience working with sales offices. Salesmanship and self-confidence to deal with frequent, stressful customer relationship issues. Excellent sales presentation skills. Strong problem-solving skills and ability to translate technical challenges into actionable plans. PHYSICAL & ENVIRONMENTAL DEMANDS No special physical requirements. TIME TRAVEL REQUIRED 30-50% The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($45,968.00 - $68,952.00) Target Bonus: % Req ID: 27333 Purpose This role is responsible for overseeing quality assurance checks on incoming materials, ensuring compliance with specifications, conducting PAPR inspections, and contributing to related projects. It also plays a critical role in executing stock audits and supporting the rejection processes for subsidiary operations Reports to Quality Assurance Manager. Job Description Promote an atmosphere of continuous process and employee improvement. Support or drive Continuous Improvement activities. Enforce quality standards in all facets of the assigned areas. Assist with the evaluation, proper identification, and disposition of all non-conforming items and materials. Follow all significant product, document and process changes which affect quality. Work with departmental supervision in developing and maintaining a trained work force. Define, troubleshoot, and assist in resolution of daily production quality problems. Must have an uncompromising attitude towards Quality. Maintain manufacturing quality performance metrics and/or quality records. Manage Quality aspects of Stop Shipment process, from initiation to closure. Take active role in Stop Ship investigations and Stop Ship rework tracking/coordination. Take active role in analysis of scrap and yield opportunities. Perform work center, finished product and process audits, as required. Create Process Maps. Initiate CAPA Determinations. Report safety near misses and incidents whenever applicable. Basic Requirements Technician IV: Vocational training and 8+ years of experience in a relevant work environment is required; or High School Diploma/GED with 10+ years' experience in a relevant work environment. a. Has advanced and specialized expertise, typically developed through a combination of job-related training and considerable work experience b. Works autonomously within established procedures and practices c. May act as a lead, coordinating and facilitating the work of others Ability to work effectively and cross-functionally on the shop floor on a regular basis. Demonstrated computer skills in MS Office and Windows operating system. Ability to develop and maintain records and to follow projects through to conclusion. Basic understanding and knowledge of manufacturing engineering and quality standards. Ability to use measurement and inspection tools such as Calipers, Micrometers, Pins, Gauges, Protractor, and Scale. Capable of frequent standing and walking and lifting up to 60 lbs Must have excellent attendance, safety and work record Ability to work rotating shifts. Environmental, Health, and Safety Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books, such as SSW Specifications, Plant Rules and Regulations, and Material Safety Data Sheets. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS and JHA procedures. Personal Protective Equipment PPE per EHS 560. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Values & Innovation At Under Armour, we are committed to empowering those who strive for more, and the company's values - Act Sustainably, Celebrate the Wins, Fight on Together, Love Athletes and Stand for Equality - serve as both a roadmap for our teams and the qualities expected of every teammate. Our Values define and unite us, the beliefs that are the red thread that connects everyone at Under Armour. Our values are rallying cries, reminding us why we're here, and fueling everything we do. Our pursuit of better begins with innovation and with our team's mission of being the best. With us, you get the freedom to go further - no matter your role. That means developing, delivering, and selling the state-of-the-art products and digital tools that make top performers even better. Purpose of Role Step up. Lead the floor As a Sales Keyholder, you're the right hand to our store leaders - driving sales, coaching teammates, and keeping energy high. It's the perfect first step into leadership for someone whose ready to take charge, inspire others, and make every shift count. Your Impact We count on our Sales Keyholders to: Ensure all teammates provide great customer service Lead a selling culture and enhance the customer experience Recognize and reward performance Coach, train, and support teammates Manage loss prevention, safety, and audit expectations and results Ensure the store is neat, clean, and well-stocked Open and close the store when necessary Support in driving sales and retail/omni KPI target achievement Act as the leader on duty and consistently models the brand's Athlete service standards and selling behaviors Provide in-depth information related to a wide portfolio of technical products Partner with rest of store leadership in maintaining standards covering merchandise and floor sets Evaluate store sales and payroll goals using payroll reports and tools; make scheduling adjustments to meet business needs. Build Athlete loyalty through in-store experience, using various available applications Effectively communicate with athletes, teammates, and leadership Assume Stock Keyholder responsibilities as necessary Perform other tasks as assigned by management Requirements To be considered for this role, you must meet these minimum requirements: At least 18 years old High school degree or equivalent 1+ year of retail/customer service experience Local language fluency required; basic English is a plus Available to work a flexible schedule; including evenings, weekends, and holidays Knowledgeable of store operations, visual merchandising, stockroom, risk management & safety Moderate knowledge of industry/retail operations and applying this knowledge to create solutions Advanced selling experience and comprehensive industry understanding Ability to bend, squat, reach, climb a ladder and stand for extended periods of time with or without reasonable accommodation Comfortable with or willingness to learn technology (such as hand-held and mobile devices) Strong communication skills Can stand, walk, bend and lift cartons weighing up to 25 lbs./ 12kgs during each work shift with or without accommodation Benefits & Perks Perks & benefits our Part-Time Associates receive: Generous employee discount Ability to participate in special contests with the opportunity to win merchandise and other exclusive prizes Work-Life Assistance Program to support health, personal, family or work-related challenges High-energy environment, working alongside people who appreciate the power of a team Opportunities for professional development and advancement $16.75-$18.83 USD Our Commitment to Equal Opportunity At Under Armour, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion or belief, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, family or paternal status and any other characteristic protected by applicable law. Under Armour seeks to recruit, develop and retain the most talented people representing a wide variety of backgrounds and perspectives. If a reasonable accommodation is needed to participate in the job application or interview process, please contact our Human Resources team via candidateaccommodations@underarmour.com.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27865 Summary Position Overview The Facilities Engineering team within Cleveland Operations is responsible for planning, maintaining, and improving the infrastructure that supports our office, laboratory, and manufacturing environments. Our work ensures that every space operates safely, efficiently, and in alignment with organizational goals. As a Facilities Engineering Technician, you will play a key role in executing facility projects and supporting day-to-day operations. You'll collaborate with project managers and engineers to implement improvements, manage construction activities, and coordinate logistics such as relocations and contractor oversight. This position offers a hands-on opportunity to contribute to the reliability, safety, and functionality of our facilities while driving continuous improvement across all areas. Job Duties and Responsibilities Key Responsibilities: Assist project managers and engineers with construction activities, safety initiatives, and process improvements. Communicate construction plans to stakeholders and occupants, including details on temporary relocations, utility disruptions, construction zones, access changes, and noise mitigation strategies. Collaborate in a hands-on team environment to implement facility improvements, upgrades, and modifications. Promote and support Environmental, Health, and Safety (EHS) initiatives to maintain a safe and compliant workplace. Manage small to medium-sized projects and assist with capital projects under limited supervision. Provide support to other Facilities Team members as needed. Independently prioritize and complete office-related requests from internal customers. Assemble office furniture and workstations (e.g., desks, tables, filing cabinets, chairs) as required for projects. Operate or develop proficiency in facility equipment (e.g., forklifts, pallet jacks) for material handling tasks. Typical Assignments: Develop layouts and budgets for office, lab, or factory projects. Supervise and coordinate contractors during construction activities. Oversee completion of punch list items and ensure final occupancy readiness. Coordinate moves and project closeout activities. Source materials and products for facility projects. Address safety, environmental, and ergonomic concerns. Manage equipment removal, modification, and installation. Conduct contractor safety orientations. Perform additional tasks assigned by the supervisor. Basic Requirements Vocational Training and 5+ years' experience required; or GED with 7+ years in related field. (but does not require a university degree). Level IV; Vocational Training and 8+ years' experience required; or GED with 10+ years in related field. (but does not require a university degree). Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Has advanced and specialized expertise, typically developed through a combination of job-related training and considerable work experience in construction May act as a lead, coordinating and facilitating the work of others but is not a supervisor Works autonomously within established procedures and practices Capable of performing hands-on work as required Demonstrated experience with MS Office tools including Word, Excel, and PowerPoint Experience with AutoCAD preferred. Ability to work independently or as part of a team Demonstrate good judgment and make good decisions Self-motivated, and safety conscious Strong organizational skills Ability to handle a variety of assignments and changing priorities Good computer skills Strong written and oral communication skills Ability to occasionally work overtime, off shifts and between facilities in Northeastern Ohio Ability to be effective working extensively in any area with employees or contractors. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Powell Service Division is looking for a highly skilled and motivated Senior Service Technician interested in joining one of the nation's leading providers of medium and low voltage switchgear. Powell Service Technicians are responsible for ensuring the end-to-end safety, quality and performance of Powell equipment across the US and Canada. This includes performing installations, preventative maintenance, corrective maintenance, and periodic supervision of small crews. The ideal candidate thinks critically, can work well independently, and is a problem solver. Senior service technicians are expected to service the west coast, gulf coast south, offshore and east coast service regions. Qualified Service Technicians are provided safety and technical training with full office support. Once qualified, Technicians are assigned a company vehicle, standard tooling, testing equipment, a laptop, smart phone, and company expense card. Key Responsibilities Adhere to Powell's current safety and quality standards Complete all site documentation in in a timely manner; including but not limited to, weekly time sheets, signed service and repair order, materials used and report writing. Provide regular and clear communication regarding work schedule to Field Operations Scheduler and District Service Manager Maintain flexible work hours, which will include over time and periodic weekend support Comply with Powell ‘s standard operating procedures, documentation processes, safety processes and protocols. Coordinate with Powell Project management, customers, vendors, and labor support in a professional and customer-centric manner Able to work in different roles from supporting the Manufacturing Department within house fabrication, to overseeing small crews on installation projects. Switchgear and PCR installations DC / AC Switchgear Knowledge of Traction Power Systems Troubleshooting mechanical repair issues. Perform performance testing on Powell equipment and components, including but not limited to; insulation testing (megger testing), Ductor, Hi Potential testing, torque tests and mechanical / functional testing. Perform regular inspections of any issued vehicle or calibrated equipment/tools. Demonstrate ability to manage tasks, commitments, and deadlines as it pertains to assigned tasks, communications with customers, and internal customers Job Requirements The Senior Service Technician must possess a high school diploma, as well as three or more years' experience, as a shop and / or field electrical / technician. Senior Service Technicians must exhibit knowledge of Electrical Industry manufacturing standards. Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear. Specific knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applications; electrical air and surface creepage clearance requirements. Demonstrate knowledge in the design and manufacture of bus and structural modification projects. Powell also requires that all Service Technicians undergo Factory Certified Technician training and maintain a passing grade. The Senior Service Technician must be experienced in the art of writing accurate and complete test reports, project summaries and has the ability to explain anomalies found on a given project. Knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Basic AC and DC theory; contactor and circuit breaker schematics are a must. The Senior Service Technician must be able to perform of hi-pot testing and breaker function testing. i.e.: testing of over-current and motor protection relays with current injection; acceptance testing of dielectric apparatus using over voltage testing; mechanical and electrical functional testing of circuit breakers and electrical switchgear. The Senior Service Technician will also be expected to demonstrate proficiency with computer skills using Oracle, MS Outlook, Power DB, Word & Excel. Additional requirements include but are not limited to: Working knowledge with using the following test equipment: Hi potential, DLRO, Multi-meter, dial caliper. Must demonstrate working knowledge with the use of various hand tools and mechanical adaptability. Must have verbal and written communication skills. Proficiency in problem solving is a preferred. Willing to attend in-house and out-side training. Willing to travel up 85% of the year. Demonstrate ability to read and interpret plan sets and one-line diagrams. Working Environment The Senior Service Technician typically performs duties in an industrial environment. This position requires services both locally and across the Continental US. It is the policy of Powell Service Division to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. Additional requirements are as follows: Medium physical effort (lifting/moving up to 50 pounds) Have full range of mobility in upper and lower body and be able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time. Work at heights greater than 10'. Work on ladders of all types. Work on scissor and bucket lifts (on occasion). In addition, employees will be required to complete and pass Company and Customer required drug screening, background and employment verification checks, maintaining eligibility throughout employment. #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact ************. Application status inquiries will not be accepted in this manner.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27882 Purpose To provide technical and process support for PC Board manufacturing operations. Job Duties and Responsibilities Provides technical and process support related to PC Board production, prototype, and process development. Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems. Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations. Address concerns reported through employee suggestion and near-miss systems. Encouraged to initiate changes for continuous product and process improvement. Basic Requirements Minimum of a high school education or GED is required. Minimum 5 years of work experience or Associate Degree in related field. Rotational availability between 1st and 2nd shift is preferred. Has full proficiency in a range of technical processes or procedures (or deep skills in a single area) through job-related training and considerable work experience Completes a variety of atypical assignments Works within defined technical processes and procedures or methodologies and may help determine the appropriate approach for new assignments Works with a limited degree of supervision, with oversight focused only on complex new assignments Acts as an informal resource for colleagues with less experience Effective written and oral communication skills. Strong desire to take ownership and drive results. Ability to analyze data to drive decision making. Good organizational skills and computer skills. Proficient in the use of MS Office including but not limited to Word, Excel, PowerPoint. On an as needed basis, train, assist and observe other department personnel (as qualified) on the department equipment and/or process for improvements such as but not limited to safety, quality, ISO 14001 & 45001 and manufacturing proficiency/efficiency. Environmental Health & Safety (EHS) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books such as SSW Specifications, Plant Rules and Regulations. Safety Data Sheets are stored electronically and available 24/7. In an emergency SDS may be accessed at Security. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS and JHA procedures. Personal Protective Equipment: See Department PPE Chart Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27095 Purpose Ability to machine, mill, and grind various types of metals. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Maintenance Machinist A. Reports directly to the department Manager. Job Responsibilities Performs all tasks under general supervision. Provides training and assistance to less experienced Machinists. Assumes ownership of work task and demonstrates initiative to get work completed. Creates and reworks machinery and equipment components according to requisition documentation, blueprints, or other drawings. Sets up equipment operation feed, speed and temperature. Follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling, grinding, and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials. Selects and measures raw materials and parts to specifications to prepare for production processing. Performs reworking and machining of new and spare production parts for departments. Repairs maintenance parts as needed. Verifies the accuracy of work by using calipers, micrometers, dial indicators, and various measuring instruments. Order and maintain project related material as required. Assist with keeping neat and orderly records on work performed and repairs made. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager Basic Requirements Must pass the skilled trade assessment test for this position. Must have a basic knowledge and experience reading mechanical drawings. Must have a basic knowledge and experience in proper machining and grinding techniques (Feed rates, sequencing, cutting speeds). Must have a basic knowledge and experience in setting up machine tools to produce precision parts. Must have a basic knowledge and experience in writing and modifying machine programs. Must be able to use math to calculate dimensions and determine speeds and feed rates. Ability to use various measuring devices (calipers, micrometers, dial indicators, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Fort Loramie Employment Status: Hourly Full-Time Req ID: 26270 Summary Lincoln Electric Automation has an outstanding opportunity for a Mechanical Design Engineer. The Mechanical Design Engineer plays a key role supporting our team in the design, building, shipping, and service of Lincon Electric Automation products. A Mechanical Designer typically works on one project at a time (typically creating new designs that are very close to reference designs). In addition to competitive pay, Lincoln Electric offers an annual incentive plan, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do • Understand and gain knowledge needed to work in software systems. i.e. Solidworks • Provide mechanical layouts and details to production • Take initiative to meet challenging project timelines and budgets (hours and material) • Ensure required ISO documentation is completed • Assist in compiling electronic documentation for Service Manuals, updating design package to reflect status configuration of any critical item • Assure that product, as designed, is in conformance with quote and customer purchase order • Work well in a team environment and communication groups may include; Machine builders, Project Management, Engineering Teams, Management, and support functions • Provide small-scale mechanical layouts and detail prints to production • May support other roles as a cross-training opportunity Education & Experience Requirements Mechanical Engineer or Mechanical Engineering Technology degree required Minimum 2 years of experience in manufacturing and design of industrial automated equipment CAD (3D modeling) required Computer proficiency including spreadsheet, word processing and project software Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27996 Scope Responsible for the timely and proper lubrication and maintenance of mechanical, pneumatic, and hydraulic equipment. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader. Reports directly to the department Foreman. Responsibilities Primary duties to perform this job include: Performs all task under limited supervision. Provides training and assistance to less experienced Oilers. Leads, organizes, maintains, and ensures completion of a lubrication schedule. Assumes ownership of work task and demonstrates initiative to get work completed. Evaluates and recommends equipment lubrication schedule per experience and manufacturers recommendations. Order and maintain oils, greases, and solvents necessary to complete task. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Foreman, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, may be required to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Foreman. Quality Must understand the Company's Quality Policy and how it relates to this job. Must understand the relevance and importance of the quality activities and how they contribute to the achievement of the quality objectives. Environmental, Health & Safety (EHS) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS Procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS Procedures, Company Specifications, Work Instructions, Plant Rules and Regulations, Job Hazard Analysis (JHA), and Safety Data Sheets (SDS) can be accessed by supervision and are located at Security, and are available upon request. Immediately notify the Foreman of any safety hazard, equipment not operating correctly, or if there are any questions regarding EHS procedures. PERSONAL PROTECTIVE EQUIPMENT - Follow the personal protective equipment policy detailed in Plant Rules & Regulations EHS560 & EHS580. Skills, Aptitude and Abilities High School education or equivalent. Must have an advanced knowledge of proper industrial lubrication techniques and applications. Must have a basic knowledge of mechanical systems and the ability to understand hydraulic and pneumatic systems. Must have a basic ability to diagnose the root cause of a problem and adjust lubrication as required. Must have a basic level of knowledge and experience reading mechanical drawings and service manuals. Excellent attendance required. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Training As directed by the department Foreman in conjunction with experienced personnel. The department Foreman shall ensure that the employee receives the following training at the appropriate times per the Maintenance Department Training Matrix. The department Foreman shall determine when an individual has completed the training and is qualified to assume these responsibilities. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Engineering Req ID: 27722 Summary Lincoln Electric is seeking a Programmer Technician for our Euclid, OH World Headquarters. The primary function of a Programmer Technician is to program equipment used throughout the Machine Division, which can include but not be limited to sheet metal fabrication equipment such as punches, lasers, and press brakes, measuring equipment such as tool pre-setters and scanners, and robots. The role involves developing manufacturing processes for new products, implementing new equipment, and driving continuous improvements for quality, safety, and cost reductions. The successful candidate will provide collaborative communication between cross-functional departments while applying knowledge and experience to innovate and drive improvement. In addition to competitive pay, Lincoln Electric offers an annual bonus plan, tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! Job Duties and Responsibilities Creates programs for multiple types of equipment such as CNC lasers, CNC punches, press brakes, stamping presses, robots, scanners, tool pre-setters and other equipment. Creates set up sheets, procedures and documentation for the manufacturing process. Communicates and works with pieceworkers, vendors, customers, and internal cross-functional departments. Works autonomously with limited supervision to perform small to medium sized projects and day-to-day shop support. Ability to define tasks, estimate completion dates and communicate the status accurately. Assignments can be routine and non-routine and will typically involve a mix of analysis and hands-on activities. Typical assignments may include but are not limited to: Develop and implement new processes for new products and new equipment. Create/Update equipment programs, SAP routings, BOM's and parameters. Resolve safety, environmental and ergonomics issues. Process improvements and optimization. Perform cost analysis and drive cost reductions. Evaluate and implement employee suggestions. Shop support. Capacity studies. Quality improvements. Basic Requirements Minimum 8 years of experience with vocational training in related field or minimum 10 years of experience in related field with high school diploma or GED. Excellent organizational skills as well as written and oral communication skills. Able to troubleshoot and solve manufacturing problems. Attention to detail when needed. Ability to handle a variety of assignments and changing priorities. Good computer skills with ability to effectively use Microsoft Outlook, Excel, Word, Power Point and Teams. Ability to work effectively and efficiently independently, cross functionally, or part of a team. Possess a comprehensive understanding of programming manufacturing equipment with demonstrated performance in the job. Must be able to lift 50 lbs on occassion. Excellent print reading skills. 3D CAD proficiency is a plus. Ability to be effective working with shop floor employees and to adjust work schedules at times if needed. Excellent safety / quality mindset. Able to perform hands on work as required. Able to gather and analyze data to make good fact based decisions. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this role, you will provide in-store merchandising support to Retailers to meet shoppers' needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us? What we offer: Competitive wages; $15.00 per hour Growth opportunities abound - We promote from within No prior experience is required as we provide training and team support to help you succeed Additional hours may be available upon request We offer benefits that can be customized to meet your family's needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate Perks Now, about you: Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing manner You're 18 years or older Can perform physical work of moving, bending, standing and can lift up to 50 lbs. Have reliable transportation to and from work location Demonstrate excellent customer service and interpersonal skills with our clients, customers and team members Are a motivated self-starter with a strong bias for action and results Work independently, but also possess successful team building skills Have the ability to perform job duties with a safety-first mentality in a retail environment If this sounds like you, we can't wait to learn more about you. Apply Now!

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Fort Loramie Req ID: 27957 Position Summary Identify the manufacturing process, recommend the machinery concept, accurately develop the cost model, create quotations and provide other supporting information as needed to sell Lincoln Electric Automation-designed equipment. **This position can sit in our Columbus, Coldwater or Fort Loramie, OH facilities and is hybrid - 2-3 days per week onsite*** Role Qualifications Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. Play an active role reviewing and developing customer process requirements as it pertains to the application of our products. Play an active role in communicating issues that could impact customer satisfaction. Position Responsibilities Evaluate the feasibility of automation systems based on data supplied by Sales, Engineering, Management and Customers. Develop manufacturing processes and concepts capable of producing systems or products Research and develop accurate cost estimates for Lincoln Electric Automation equipment. Write technical quotations and produce supporting documentation as needed. Assist as necessary with customer communication, presentations, and trade related events. Follow-up as necessary with sales, customers, and representatives. Responsible for following Department ISO procedures. Essential Skills and Experience Minimum High School Diploma, Associate degree in technical discipline desired (Business, Engineering Technology, Technical Sales, Project Management or similar) CAD (3D modeling a plus). Preferred 5 years of experience in manufacturing and design (mechanical/electrical) of industrial automated equipment. Metal forming (bending, forming, piercing, etc.) and metal joining (Laser, arc, resistance welding, etc.) experience preferred. Preferred 1-2 years of experience, working with customers and suppliers. Years of experience will influence final selection. Proficient in Word, Excel and PowerPoint. Effective writing and communication skills. Commitment to company values. Educational, training, and experience requirements may be modified at the Managements Team's discretion. Nonessential Skills and Experience Computer proficiency, including spreadsheet, word processing, and project management software. FMEA, Equipment Capability, Safety (OSHA Stds.) Environmental, Health & Safety (EH&S) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe and environmentally friendly manner and observe all company EHS procedures. Know that the company EHS procedures are located on the ISO drive. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. Attend required EHS training Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. ISO-14001 Complies with ISO 14001, and other relevant standards. Support, implement and understand the intent of the EMS policy. Participates with ISO-14001 as required. AS 9100 w/ ISO 9001 Complies with AS9100D and ISO 9001:2015 quality management system, procedures, and work instructions General sign-off: The employee is expected to adhere to all company policies Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Req ID: 27647 Purpose Design, implement, and maintain embedded software components for use in end products. Continually improve development techniques in order to create software more efficiently and reliably. Apply engineering knowledge to provide creative software solutions for real world customer issues and use cases. Job Duties and Responsibilities Develop multithreaded controls with industrial Real Time Operating Systems and Embedded Linux using C and C++ languages. Developing software for communication with industrial automation networks (e.g. CAN, Ethernet/IP), Internet protocols (e.g. HTTP, FTP), and wireless (e.g. Wi-Fi and Bluetooth). Developing software for embedded graphical displays. Interact with key stakeholders including marketing, suppliers, customers, distributors, and sales engineers to drive new product innovation. Maintains records of all work in process and documents interim/final results in the applicable format; these include Project Definitions, Milestone Plans, ES Reports, Technical Reports, Project Tracking Progress Reports and presentations at meetings/seminar. Develop and refine automated test setups, frameworks, and methods for embedded systems, including unit tests, integration tests, and system-level test to support new product development, product evaluations, and competitive benchmarking. Coordinate activities of internal and external technical support personnel as required. Troubleshoot issues in development and production environments, ensuring rapid resolution and minimizing downtime. Reading and interpreting schematics and component data sheets. Assignments are broad in nature, requiring originality and ingenuity. Has appreciable latitude for unreviewed action or decision. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Basic Requirements Level II: Four-year Engineering degree is required and, Minimum of three (3) years Engineering experience. Level III: Four-year Engineering degree is required and, Minimum of five (5) years Engineering experience. Strong familiarity with embedded systems architecture, design considerations, and hardware-software interactions. Industry experience writing C for embedded platforms. Strong understanding of testing methodologies and frameworks for embedded systems Effective communication skills, with the ability to convey complex technical concepts to both technical and non-technical stakeholders. Ability to work independently and as part of a team. Excellent organizational skills. Ability to handle a constantly changing set of priorities. Initiative to take ownership of product designs. Possesses and applies a broad knowledge of principles, practices and procedures of field of specialization to the completion of difficult assignments. The selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Competencies Proficiency in C and C++ programming languages Knowledge of Real Time Operating Systems and Embedded Linux. Experience in developing software for industrial automation networks, internal protocols, and wireless communication. Professional experience with TDD, writing unit tests, automated testing, and continuous integration type frameworks. Familiarity with Azure DevOps and Agile development practices. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27850 Position Overview Plant Engineering is the department within Lincoln Electric which is responsible for designing, maintaining, improving, and supporting the equipment, manufacturing processes, and plant-wide infrastructure. Past Plant Engineers have worked to create the operations as we know it today. As a Plant Technologist, you will play a pivotal role in supporting and executing projects across our manufacturing facilities in the Cleveland and Mentor areas. Your focus will be on identifying and solving technical challenges while ensuring that all equipment and processes align with the organization's safety, health, quality, and productivity standards. This role offers an exciting opportunity to contribute to the sustainability and growth of our operations. Job Duties and Responsibilities Collaborate in a team environment to execute capital projects for manufacturing facilities in the Cleveland and Mentor areas. Take responsibility for the mechanical aspects of projects, which may include documentation, equipment installation, project management, and support. Implement engineering solutions to improve equipment reliability and safety, reduce operating and maintenance costs, and effectively manage outage risks. Create and maintain sustainable documentation for use by engineering and maintenance teams. Implement solutions that comply with ISO 14001 and Environmental Health and Safety (EHS) initiatives to enhance environmental and employee health and safety standards. Provide capital cost estimates and establish project timelines to ensure successful completion of project work. Review equipment quotations to confirm compliance with desired specifications. Deliver technical support to the Production and Maintenance departments. Coordinate and interface with engineering, production, maintenance, and supply management teams. Work closely with and often manage outside engineering and construction personnel. Ensure all safety, health, environmental, and compliance requirements adhere to the appropriate regulations. Provide support for various tasks as directed by Plant Engineering managers to ensure efficient operations. Basic Requirements Education / Experience: Bachelor's degree in Engineering Technology (Mechanical) with a minimum of 3 years of experience, OR Bachelor's degree and an associate degree in related fields with 5 years of experience, OR Diploma/GED with 10 years of relevant experience. Strong desire to take ownership of tasks and deliver results. Excellent problem-solving and troubleshooting abilities. Demonstrates good judgment, self-motivation, and a commitment to safety. Proven ability to manage multiple tasks, prioritize work effectively, and meet deadlines. Flexibility to handle diverse assignments and adapt to changing priorities. Ability to perform hands-on work when needed and work collaboratively on the shop floor with employees and processes. Technically proficient in CAD modeling. Preferred systems: Solid Edge; AutoCAD. Willingness to occasionally work off shifts, travel between facilities in Northeast Ohio, and travel as required. Job Rate: Engineering Technologist II to IV Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 27753 Purpose Primarily a support role running multiple pieces of toolroom equipment to make parts to print. Job Responsibilities Maintain a high standard for safety, workmanship, product quality and productivity. Primarily a support role running multiple pieces of toolroom equipment to make parts to print. Proficiency in multiple machines and above average knowledge in one is expected. On occasion build, rework, maintain, and repair all forms of tooling using available equipment and resources. Work from design prints, sketches, sample parts and oral instructions. Personally possess basic inspection and machining tools to effectively perform your job. Determine the best method to manage and complete a project by a designated due date. Work as a team lead as well as a team member depending on the departmental workload. Effectively communicate with other personnel and educate apprentices in best practices. Maintain accurate documentation of tool modifications, repair, preventative maintenance and individual work performed throughout the shift. Work overtime or come in on off hours to satisfy production requirements. Safely use a tow motor, crane or jib hoist to move materials and tooling. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Job Requirements Completed a high school or post high school machinist program or demonstrated the ability to perform the aforementioned tasks. Proficiency in operating all common machining equipment, mills, lathes, grinders, etc. Ability to program computer controlled toolroom equipment Above average knowledge of computers Ability to Stick and TIG weld is a plus but not required. Use of all inspection measurement equipment standard in the tool making industry Time management skills and the ability to work to deadlines in a fast-paced environment. Read, understand and follow specifications and prints. Good communication skills. Moderate hand dexterity is required for this position. Mainly first shift schedule, but available to work second shift, overtime and weekends as required. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Company Profile: The Baerlocher Group of companies is one of the world's leading additive suppliers, drawing on experience from more than 190 years of company history. Our products have a worldwide reputation for their high-quality standards and commitment to innovation and sustainability. Job Summary: The EH&S Manager is responsible for developing, implementing and maintaining environmental, safety, and health programs to ensure compliance with federal, state, and local regulations within a chemical manufacturing environment. This role focuses on minimizing risks, promoting a strong safety culture, and ensuring the safe handling, storage, and disposal of hazardous materials. Key Responsibilities: Regulatory Compliance : Ensures adherence to OSHA, EPA, DOT, NFPA, and other applicable regulations. Prepares and submits required reporting e.g. SARA, RCRA, stormwater, emissions, permit renewal applications. Interfaces with regulatory agencies proactively and on an as needed basis. Monitors current and pending regulations, providing timely interpretation and summaries to affected facility. Supports facility in the timely reporting of EHS matters to internal and external stakeholders, including regulatory agencies. Safety Program Management : Develops and supports the implementation of company EHS standards to ensure facility compliance with federal, state, and local regulations. Conduct risk assessments and hazard analyses for chemical processes. Coaches and mentors' operations management teams and site on EHS matters, encouraging continuous improvement. Leads and supports companywide EHS initiatives, working collaboratively with operations management teams and other company departments. Identifies best practices and strategically integrates them into facility EHS plans. Incident Management : Supports and encourages timely incident investigations, leading the Root Cause Analysis (RCA) process when needed. Maintains records of incidents and coordinates with regulatory agencies as needed. Responds and provides real time assistance in emergency situations. Training & Communication: Designs and deliver safety training programs for all employees of the organization, including HAZCOM and emergency response/fire & mock drills. Promotes a proactive safety culture through regular communication and engagement. Audits & Inspections: Performs regular safety audits and inspections of facilities and processes to detect existing or potential accidents and health hazards. Determines corrective or preventive measures where indicated and follows up to ensure measures have been implemented. Ensures proper storage, handling, and disposal of hazardous chemicals. Analyzes EHS metrics, communicating and implementing action plans to address trends. Required Knowledge/Skills/Abilities: We assume that the possible candidate can think and act independently and entrepreneurially, that the candidate has a structured way of working, analytical capabilities paired with an instinct for people and is a flexible team-player with a “hands-on” mentality. In addition, we require: Bachelor's degree in Environmental Science, Safety Management, Chemical Engineering, or a related field. Certification preferred (CIH, CSP, and/or CHP). 7-10+ years of progressive experience in Safety Management; Chemical Manufacturing experience preferred. Strong knowledge of OSHA, EPA, and state-specific regulations. Experience with hazardous materials, air permits, and environmental reporting. Effectively communicates across all organizational levels through clear writing, persuasive speaking, and proficient group facilitation. Acts as a change leader by influencing organizational behavior, driving continuous improvement, and fostering a culture of safety and compliance. Provides clear expectations, ensures accountability, and builds commitment while modeling professionalism, approachability, and alignment with organizational goals. Must be a team player that interacts effectively with co-workers in group or in independent cooperative activities. Ability to function under pressure and able to prioritize numerous tasks with conflicting deadlines. Ability to respond to emergencies and work flexible hours as needed. Ability to influence and to drive safety culture. Proficient in Microsoft Office (Word, Excel, PowerPoint, Access) with the ability to prepare reports, presentations, and data analysis to support decision-making.