Bench mechanic job description
Updated March 14, 2024
7 min read
Find better candidates in less time
Post a job on Zippia and take the best from over 7 million monthly job seekers.
Example bench mechanic requirements on a job description
Bench mechanic requirements can be divided into technical requirements and required soft skills. The lists below show the most common requirements included in bench mechanic job postings.
Sample bench mechanic requirements
- High school diploma or equivalent
- Certification in automotive mechanics
- Proficiency in various tools and machinery
- Knowledge of safety protocols
- Ability to interpret technical drawings
Sample required bench mechanic soft skills
- Strong organizational skills
- Excellent problem-solving abilities
- Ability to work in a team
- Good communication skills
- Attention to detail
Bench mechanic job description example 1
Kaman bench mechanic job description
Performs the production process required to trim, finish, and produce quality parts.
Supervision: Generally requires minimal supervision.
Essential Duties and Responsibilities
Performs the production process required to trim, finish, and produce quality parts.
This position may involve knowledge of confidential information. Such information will be handled with the utmost discretion.
* Deburrs parts as required.
* Cleans parts as required.
* Rough trims parts as required.
* Uses the bandsaw on parts as required.
* Routes parts as required.
* Sands parts as required.
* Bonds parts as required.
* Uses the tablesaw on parts as required.
* Uses the drill on parts as required.
* Rivets parts as required.
* Performs handwork on parts as required.
* Reads blueprints to perform required work.
* Works from planning with minimum help from the lead or supervisor.
* Assists in moving parts and tools from one area to another as required.
* Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations.
* Reports defective materials or questionable conditions to the department supervisor.
* Maintains highest standards of quality and quantity.
* Records required information on planning.
* Participates in Kaizen events.
Knowledge, Skills, and Abilities
* Ability to use and understand simple and more complex measuring tools.
* Ability to interpret visual aids.
* Perform basic shop math.
* Read and write well enough to understand planning and to record required information into company systems.
* Ability to operate a forklift.
* Ability to use a PC to record required information, clock in and out of jobs, etc. Ability to train others on the use of the company systems.
* Ability to use and repair basic and more complex hand tools effectively.
* Ability to work well with others and in a team environment.
* Ability to receive instructions and retain the required information.
* Ability to receive constructive criticism.
* Ability to communicate well with others.
* Must be able to bond parts.
* Must be able to read blueprints.
Qualifications
* High School Diploma or equivalent.
* Two to three years of experience in a manufacturing operations environment is preferred.
* Basic experience using a PC and company systems.
Supervision: Generally requires minimal supervision.
Essential Duties and Responsibilities
Performs the production process required to trim, finish, and produce quality parts.
This position may involve knowledge of confidential information. Such information will be handled with the utmost discretion.
* Deburrs parts as required.
* Cleans parts as required.
* Rough trims parts as required.
* Uses the bandsaw on parts as required.
* Routes parts as required.
* Sands parts as required.
* Bonds parts as required.
* Uses the tablesaw on parts as required.
* Uses the drill on parts as required.
* Rivets parts as required.
* Performs handwork on parts as required.
* Reads blueprints to perform required work.
* Works from planning with minimum help from the lead or supervisor.
* Assists in moving parts and tools from one area to another as required.
* Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations.
* Reports defective materials or questionable conditions to the department supervisor.
* Maintains highest standards of quality and quantity.
* Records required information on planning.
* Participates in Kaizen events.
Knowledge, Skills, and Abilities
* Ability to use and understand simple and more complex measuring tools.
* Ability to interpret visual aids.
* Perform basic shop math.
* Read and write well enough to understand planning and to record required information into company systems.
* Ability to operate a forklift.
* Ability to use a PC to record required information, clock in and out of jobs, etc. Ability to train others on the use of the company systems.
* Ability to use and repair basic and more complex hand tools effectively.
* Ability to work well with others and in a team environment.
* Ability to receive instructions and retain the required information.
* Ability to receive constructive criticism.
* Ability to communicate well with others.
* Must be able to bond parts.
* Must be able to read blueprints.
Qualifications
* High School Diploma or equivalent.
* Two to three years of experience in a manufacturing operations environment is preferred.
* Basic experience using a PC and company systems.
Post a job for free, promote it for a fee
Bench mechanic job description example 2
Raytheon Technologies bench mechanic job description
Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it.
Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future.
Innovation through diversity of thought. At Pratt & Whitney, we believe diversity of thought enables creativity, innovation, and a foundation for inclusion. By fostering an inclusive culture, we accept a shared accountability and responsibility to recognize, sponsor, coach, hire and promote talent equally. We welcome our employees to be their whole - best - selves at work because trust, respect and integrity, are a part of our DNA.
At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?
The Aftermarket Repair organization (PSD) located in Springdale, AR is looking for a Welder / Bench Mechanic for its 2nd shift operations (M-F, 3:00PM-11:30PM).
Key Responsibilities:
+ This position entails operating TIG weld equipment in manual and automatic configurations for welding case parts and material for the aerospace industry.
+ Bending, smoothing, and deburring surfaces and performing assembly/ disassembly
+ Blast and cleaning operations on aerospace case parts as outlined in the work instructions to meet customer requirements.
+ Set-up and operate TIG welding machines.
+ Prepare parts for welding.
+ Prepare parts for welding and/or machining by blending and deburring parts to written specifications.
+ Set-up and operate machines including a selection of appropriate abrasive belt, wheel, or disk for blending and deburring.
+ Inspect work on parts to verify conformance with these specifications.
+ Complete required paperwork associated with work and work instructions.
+ Maintain internal weld certifications.
+ Maintain a clean work environment.
Basic Qualifications:
+ High school degree or equivalent
+ US Citizenship required due to government contracts
+ Experience with TIG welding and bench mechanic operations
+ Ability to pass standard weld certifications internally
Preferred Qualifications:
+ Technical trade school / certifications preferred
+ Related experience preferred
Pratt & Whitney in Springdale, AR is a FAA regulated facility and as such under the U.S. Departments of Transportation's Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40.
What is my role type?
In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is:
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.
Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility.
#pwhourly
Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future.
Innovation through diversity of thought. At Pratt & Whitney, we believe diversity of thought enables creativity, innovation, and a foundation for inclusion. By fostering an inclusive culture, we accept a shared accountability and responsibility to recognize, sponsor, coach, hire and promote talent equally. We welcome our employees to be their whole - best - selves at work because trust, respect and integrity, are a part of our DNA.
At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?
The Aftermarket Repair organization (PSD) located in Springdale, AR is looking for a Welder / Bench Mechanic for its 2nd shift operations (M-F, 3:00PM-11:30PM).
Key Responsibilities:
+ This position entails operating TIG weld equipment in manual and automatic configurations for welding case parts and material for the aerospace industry.
+ Bending, smoothing, and deburring surfaces and performing assembly/ disassembly
+ Blast and cleaning operations on aerospace case parts as outlined in the work instructions to meet customer requirements.
+ Set-up and operate TIG welding machines.
+ Prepare parts for welding.
+ Prepare parts for welding and/or machining by blending and deburring parts to written specifications.
+ Set-up and operate machines including a selection of appropriate abrasive belt, wheel, or disk for blending and deburring.
+ Inspect work on parts to verify conformance with these specifications.
+ Complete required paperwork associated with work and work instructions.
+ Maintain internal weld certifications.
+ Maintain a clean work environment.
Basic Qualifications:
+ High school degree or equivalent
+ US Citizenship required due to government contracts
+ Experience with TIG welding and bench mechanic operations
+ Ability to pass standard weld certifications internally
Preferred Qualifications:
+ Technical trade school / certifications preferred
+ Related experience preferred
Pratt & Whitney in Springdale, AR is a FAA regulated facility and as such under the U.S. Departments of Transportation's Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40.
What is my role type?
In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is:
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.
Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility.
#pwhourly
Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
Dealing with hard-to-fill positions? Let us help.
Bench mechanic job description example 3
Ducommun bench mechanic job description
Work with general supervision, plans, lays out, fabricates, assembles, installs,
and repairs sheet metal parts, equipment, and products by performing the
following duties.
The following description has been provided as
examples of the types of work performed by employees assigned to this job
classification. Management reserves the
right to add, modify change or rescind the work assignments of different
positions in accordance to Ducommun Aerostructures business needs, and to make
reasonable accommodations so that qualified employees can perform the essential
functions of the job. Each job function will be conducted within the quality
standards described in the Ducommun Aerostructures Quality Statement. Follow
all safety rules. Other duties may be
assigned
Reads and interprets blueprints, sketches, or
product specifications to determine sequence and methods of fabricating,
assembling, and installing sheet metal products.
Performs all deburring operations Strip remaining maskant and silstic from finished
chem. Mill parts Removes burrs and sharp edges by use of various
hand tools and materials such as files and edge breakers
Smoothes edges and removes build ups with air or
electric equipment using abrasive disk and sleeves Operates burring equipment using countersink,
grinding wheels, burring rolls, bench grinders, rotary files, drill presses and
jitterbug Control thickness by using ultrasonic gages and
micrometers calipers,, scales to work to close tolerances +/-.002
Skills & Qualifications
To perform this job successfully, an individual must be able to perform each essential
duty satisfactorily. The requirements listed below are representative of the
knowledge, skill, and/or ability required. Reasonable accommodations may be
made to enable individuals with disabilities to perform the essential functions.
Ability to read, interpret
and comprehend instructions, such as blue prints and shop drawings, chem. mill
templates with an emphasis on chemical milling features, excess and special
conditions. Ability to write simple
correspondence. Ability to effectively
present information in one-on-one and small group situations. Ability to add,
subtract, multiply, and divide in all units of measure, using whole numbers,
common fractions, and decimals. Ability to apply common sense understanding to
carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving
several concrete variables in standardized situations.
1885 N. Batavia Street
Orange, California, 92865
United States
and repairs sheet metal parts, equipment, and products by performing the
following duties.
The following description has been provided as
examples of the types of work performed by employees assigned to this job
classification. Management reserves the
right to add, modify change or rescind the work assignments of different
positions in accordance to Ducommun Aerostructures business needs, and to make
reasonable accommodations so that qualified employees can perform the essential
functions of the job. Each job function will be conducted within the quality
standards described in the Ducommun Aerostructures Quality Statement. Follow
all safety rules. Other duties may be
assigned
Reads and interprets blueprints, sketches, or
product specifications to determine sequence and methods of fabricating,
assembling, and installing sheet metal products.
Performs all deburring operations Strip remaining maskant and silstic from finished
chem. Mill parts Removes burrs and sharp edges by use of various
hand tools and materials such as files and edge breakers
Smoothes edges and removes build ups with air or
electric equipment using abrasive disk and sleeves Operates burring equipment using countersink,
grinding wheels, burring rolls, bench grinders, rotary files, drill presses and
jitterbug Control thickness by using ultrasonic gages and
micrometers calipers,, scales to work to close tolerances +/-.002
Skills & Qualifications
To perform this job successfully, an individual must be able to perform each essential
duty satisfactorily. The requirements listed below are representative of the
knowledge, skill, and/or ability required. Reasonable accommodations may be
made to enable individuals with disabilities to perform the essential functions.
Ability to read, interpret
and comprehend instructions, such as blue prints and shop drawings, chem. mill
templates with an emphasis on chemical milling features, excess and special
conditions. Ability to write simple
correspondence. Ability to effectively
present information in one-on-one and small group situations. Ability to add,
subtract, multiply, and divide in all units of measure, using whole numbers,
common fractions, and decimals. Ability to apply common sense understanding to
carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving
several concrete variables in standardized situations.
1885 N. Batavia Street
Orange, California, 92865
United States
Start connecting with qualified job seekers
Resources for employers posting bench mechanic jobs
Average cost of hiring
Recruitment statistics
How to write a job description
Examples of work conditions
Bench mechanic job description FAQs
Ready to start hiring?
Updated March 14, 2024
Updated March 14, 2024