Computer numerical controller machinist jobs in Harrisonburg, VA - 368 jobs

Target Responsibilities Accept, embrace, and promote the following Core Values of Core Natural Resources: Safety, Sustainability & Continuous Improvement Knowledgeable in the use and application of precision measuring instruments. This would include calipers, ID and OD micrometers, depth gages, indicators, and scales. Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements. Selects, aligns, and secures holding fixtures, cutting tools, inserts, accessories, and materials on machines as necessary to machine parts as required. Responsible for loading parts, proving out programs, operating controls, setting offsets, simple program edits, and initial inspection of parts to ensure it meets tolerances. Communicate with management, production control, quality, and other team members for assignments and to resolve machining or quality issues. Maintain a clean and organized work area and maintain all equipment, to like new appearance, according to maintenance plans and established procedures. May perform other duties as assigned. Required Skills and Experience Must be at least 18 years of age. Ability to operate a variety of precision measuring instruments, including calipers, ID and OD micrometers, depth gages, indicators, and scales. Minimum of two years of experience working on the set-up of 5-axis machines, such as Hass or Fanuc preferred. Working knowledge of tool holders, cutting tools, fixtures, inserts, and other accessories used to operate various machines. Ability to read and interpret company documents, such as blueprints, safety rules, operating/manufacturing instructions, policies, and procedures. Good manual dexterity required to work with small parts. Capable of recognizing and solving typical problems that can occur in own work area; evaluates and selects solutions from established options. Effective oral, written, and interpersonal skills. Ability to take initiative and prioritize tasks; good time management, problem-prevention, and problem-solving skills. Able to work with cross-functional teams. Able to identify areas of low efficiency and work to provide improvements. Must be able to stand/walk for long periods of time Must be able to work as scheduled and arrive to the worksite promptly to receive work assignment. Must be available to work overtime and weekends as business requires.

Job Description We are seeking a detail-oriented Laser CNC Machine Set-Up Operator to join our production team. This role primarily focuses on operating and setting up laser-machining equipment, ensuring optimal machine performance, part quality, and safe operations. The ideal candidate will have hands-on experience with CNC laser systems and a strong understanding of precision manufacturing processes. The Laser CNC Machine Set-Up Operator is responsible for selecting and loading programs, preparing tools and materials, performing test runs, monitoring ongoing production, and troubleshooting machine or process issues as they arise. Key Responsibilities: Laser Machine Setup & Operation Set up and operate CNC-controlled laser cutting and laser machining equipment for assigned production jobs. Secure raw materials or workpieces onto laser machines using appropriate fixtures or clamps. Select and verify correct programs, settings, and parameters for each job. Tooling & Program Management Choose appropriate tools, lenses, or consumables required for laser machining. Load and verify CNC programs to ensure they match job specifications. Set and adjust tool offsets and machine parameters for precise laser cutting or engraving. Calibration & Testing Perform test cuts to validate setup accuracy and program functionality. Adjust machine settings, focus, power levels, and speeds as needed to achieve required tolerances. Quality Control Inspect laser-produced parts using measurement tools to ensure accuracy and compliance with quality standards. Make necessary adjustments to maintain consistency and reduce scrap. Monitoring & Troubleshooting Monitor laser machine operations throughout production runs. Identify and address issues related to cutting quality, alignment, tool wear, or machine performance. Escalate complex issues to CNC Programmers, Engineers, or Supervisors as needed. Maintenance & Documentation Perform routine maintenance tasks to ensure machines remain in optimal condition. Document setups, adjustments, tool changes, and any production or machine issues encountered. Teamwork & Communication Collaborate with CNC Programmers, Engineers, machinists, and Supervisors to support production goals. Clearly communicate job status, challenges, and improvement opportunities. Safety Adhere to all safety protocols, including PPE requirements and laser safety standards. Report hazards, near-misses, or equipment concerns promptly. Qualifications Experience operating CNC or laser machining equipment required; CNC laser experience strongly preferred. Ability to read and interpret blueprints, technical drawings, and work instructions. Strong mechanical aptitude and understanding of machining principles. Familiarity with quality inspection tools (calipers, micrometers, gauges). Good problem-solving skills and attention to detail. Ability to work independently and as part of a team. Why Join Us? Opportunity to work with advanced laser manufacturing technology Growth and development pathways within CNC machining operations Competitive compensation and benefits Monday - Friday, 3 pm - 11 pm

We are seeking a highly skilled Senior CNC Machinist to join our manufacturing team. This role requires extensive hands-on experience operating and setting up 3-Axis CNC milling machines, ideally Haas and Fadal controls. The Senior CNC Machinist will play a key role in producing precision components, supporting process improvements, mentoring junior machinists, and ensuring quality and efficiency on the shop floor. Hours: 1st shift #LATResponsibilities: Set up, operate, and troubleshoot 3-Axis CNC milling machines, preferably Haas and Fadal Read and interpret engineering drawings, blueprints, and GD&T Perform machine setups, including tooling, fixtures, and offsets Edit and optimize CNC programs at the machine (G-code) Monitor machining operations to ensure dimensional accuracy and surface finish Conduct in-process and final inspections using precision measuring instruments (calipers, micrometers, height gauges, indicators, etc.) Identify and resolve machining issues related to tooling, materials, or programs Recommend process improvements to enhance productivity and reduce scrap Maintain machines through routine preventive maintenance and cleanliness Train and mentor junior machinists and operators as needed Adhere to all safety, quality, and company standards Collaborate with engineering, quality, and production teams to meet manufacturing goals $30 - $40 an hour

ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! SENIOR CNC MACHINIST Based out of Rocket Lab's Space Structures Complex facility in Middle River, Maryland. The Senior CNC Machinist will maintain, set up and operate the CNC machines to build flight-ready hardware that meet Rocket Lab specification at the needed rate. Space Structures Complex is hiring for multiple shift schedules. WHAT YOU'LL GET TO DO: * Work with composites CNC machine cutting carbon, glass, and wood. * Machine massive components for our Neutron rocket * Read and translate drawings/CAD models * Provide feedback to Engineering to improve instructions * Work with CNC programmer to maintain tolerances and, do basic programming activities * Work to reduce any non-conformances found by quality or engineering. * Provide improvement ideas on batch sizes, setups, tool selection etc. * Track calibration and maintenance of all equipment and tooling in the area. YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR CNC MACHINIST: * HS Diploma and 8+ years of experience with CNC operation on lathe and mills * 3+ years experience using a 5 Axis CNC THESE QUALIFICATIONS WOULD BE NICE TO HAVE: * CNC programming experience - NX programming * Experience in an Aerospace Manufacturing Environment * Experience running CMS CNC machines (Poseidon, Ares) * Manual Programming (understand and diagnose g-code) ADDITIONAL REQUIREMENTS: * Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position * Able to lift up to 25lbs. unassisted * Must be able to climb ladders and be comfortable working in tight spaces. * Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. * Must be able to walk or stand for extended periods - 8 hours min * Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: discounted employee stock purchase program, and free snacks/drinks onsite. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (MD Only) $34.62-$43.27 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

We design, develop and manufacture case packers and tray packing solutions for flexible and other tough-to-handle packages such as doypacks, pillow bags, and four-sided sealed bags. Built for around-the-clock operation, these solutions have a worldwide reputation for their quick change-over, flexibility, speed, and comprehensive design. Our Integrated state-of-the-art technologies include gravity, pick and place, wrap-around, and vision-guided robotics. At BPA, we are absolutely passionate about innovation. It adds the fun and inspiration to our work that people need to excel. Our customers stimulate innovation by developing new needs, and we are on a never-ending quest to find a better, simpler way. BPA has no innovation budget, innovation is what we are. Position: We are currently seeking a 2nd shift CNC Machinist at our South Chesterfield, VA location. Duties include but are not limited to: Reads and understands blueprint, job routings, tooling instructions, and standard charts for such specifications as dimensions, tolerances, and tooling instructions such as type of holding fixtures, cutting speeds, feed rates, and cutting tools to be used. Follows established fabrication procedures and standards. Gives feedback on programming or setup changes. Load and set tools while understanding run-out, tool length stick-outs, and proper hold based on what the tool is doing. Positions and secures tools in tool holders on turret and cross slides. Load and execute programs. Recognize, understand and properly adjust dull or chipped tooling. Set and adjust work offsets, tool wear lengths, and comp cutter. Indexes turret and adjusts work shift offsets of tools at each station. Perform Quality Control Characteristics documentation of tolerance zones specified on blueprints. Set up and operate machine tools including 4-axis and 5-axis machines Set up and operate machine tools and machines, make fixtures, and assemble fixtures for experimental purposes. Modify tools as needed. Other duties as assigned. Education/ Experience & Qualifications: A minimum of a high school diploma plus 1-3 years of experience in a machine shop environment is required. However, a combination of education and experience will be taken into consideration Must possess an understanding of basic machine implements- keys, threads, bearing fit and bushings as well as basic geometry. Applicants must be able to use measuring instruments such as micrometers, bore micrometers, height gauges, bore gauges, calipers, gauge pins, and indicators. Possess an understanding of G and M codes, machine and fixturing set-up, canned cycles, and work offset coordinate system Ability to read and understand prints and tolerances. Applicants must have exceptional problem-solving and decision-making skills and the ability to think independently Must have strong organizational skills and attention to detail. Preferred Experience & Qualifications: Strong ability to multi-task, prioritize and adapt to shifting priorities. Applicants must be capable of working under tight time constraints in a high-volume environment with multiple priorities Ability to determine the sequence of operations to efficiently manufacture parts from start to finish. Demonstrated ability to calculate speed and feed values for various materials High awareness of client satisfaction level and client needs At this time, BPA will not sponsor a new applicant for employment authorization for this position. BPA prides itself on the quality of its employees and as such, candidates who receive an employment offer will be required to successfully pass a drug screen and a background check. BPA offers an opportunity to grow and develop your career in an environment that provides a fulfilling workplace for employees, creates an environment for continuous learning, and embraces the ideas and diversity of others. We offer a robust benefits package including a majority employer-paid employee health, dental, vision, life, and disability; 20 days of PTO during the first year of employment, as well as 401(k) with a 6% match.

Multi-Axis CNC Programming & Machining Program and operate 3-, 4-, and 5-axis CNC milling centers using Siemens NX and Powermill Perform in-process probing and dimensional validation using PowerInspect Machine complex components in aerospace alloys (e.g., Ti-6Al-4V, Inconel, 7075/7050), engineered polymers, and composite interfaces Develop optimized toolpaths focused on dimensional accuracy, surface finish, and cycle efficiency Plan fixturing, workholding, and machining strategy for one-off space flight hardware Verify machine setups, clearances, and reference points to prevent collisions Engineering Collaboration & Documentation Interpret EVA subsystem drawings, GD&T per ASME Y14.5, tolerance stack-ups, and interface requirements Collaborate with mechanical design, systems engineering, metrology, and EVA integration teams Support manufacturability reviews and provide feedback on material behavior and machining constraints Build and maintain work packages including material certs, traceability, dimensional inspection reports, and traveler documentation Precision Metrology & Verification Use PowerInspect to probe with milling centers. Apply inspection requirements consistent with NASA and AS9100 aerospace hardware practices Shop Operations & Safety Operate both CNC and manual machine tools including mills, lathes, grinders, drill presses, and saws Operate forklifts, overhead cranes, and man lifts safely and efficiently Participate in required training (Fall Protection, Machine Safety, JHAs) Maintain strict compliance with safety standards, FOD control, and clean shop practices Mission Schedule Support Work independently with minimal supervision while delivering hardware on mission-critical timelines Support delivery schedules with up to 60 hours per week based on program needs Work Environment This role operates in an aerospace manufacturing environment supporting NASA. Hardware produced contributes to astronaut survival, mobility, and mission success, requiring precision, ownership, and a systems-level mindset. Requirements Preferred Experience NASA, aerospace, defense, or research fabrication support ERP/job tracking systems (JobBoss2 or equivalent) Experience with one-off, prototype, or qualification hardware CAM post-processor knowledge or customization Desired Technologies & Skills 5-axis machining experience Advanced CAM toolpath strategies for aerospace materials ASME Y14.5 GD&T proficiency Precision metrology (Renishaw, FARO, Leica, etc.) Knowledge of FOD control and traceability requirements Experience with human-rated aerospace hardware, pressure systems, or thermal/mechanical interfaces Experience in R&D, prototype, or exploration hardware fabrication Required Qualifications (Baseline) (from prior PD functional baseline) Proficient in CNC programming and setup (3-, 4-, and 5-axis) Experience with CNC and manual machining Ability to read and interpret complex drawings and CAD models Strong understanding of aerospace tolerances and precision machining practices Familiarity with Microsoft Office 365 Strong communication skills and ability to coordinate across disciplines Valid Virginia Driver's License with clean record U.S. Citizenship required Ability to pass STC and government background check

Job DescriptionSalary: $22/hr - $50.40/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense, and space OEMs, Primes, and Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts machined using standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed Martin, Northrop Grumman) to provide components for mission-critical civilian and defense programs. Weekend, nights (F,S,S 6pm - 6:30am), paid 40 hrs for 36 hrs worked Key Responsibilities Knowledge of calipers, micrometers, metrology. Ability to indicate vices. Coordinate x, y, z Knowledge of machining principles. Operate CNC machines from provided work instructions from work order or set up personnel Verifying dimensional characteristics of parts Meet expected cycle times and production schedule Completion of all required paperwork in a timely manner Requirements CNC Operations - Mill turn and Lathe - with on the job training. Reading blueprints and using hand tools Prioritizing tasks and maintaining production goals Self-starter with a good attitude Attention to detail and a strong desire to produce quality products Willing to obtain a Security clearance (Primus will sponsor upon hire) We offer comprehensive benefits for full-time employees including: PTO 10 paid holidays Medical, Dental, Vision, Short- and Long-term disability insurance 401K match Long and short-term incentive plans Benefits start 1st of the month after date of hire To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cj

Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Morris South is a division of Morris Group, Inc. We supply CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in the southeast U.S. We serve manufacturers in Alabama, Arkansas, Georgia, Mississippi, North Carolina, South Carolina, Tennessee, and Virginia. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. We help you make better parts, less expensively. Summary of Responsibility: As an Okuma CNC Machinist, you will use your technical skills to identify and provide dependable solutions for our diverse customer base. Managing customer projects, demonstrations, and other customer related questions to ensure they are completed on time and within budget. The CNC Machinist is the first line of support for our customer experience. The person filling this role is responsible for handling multiple high-level technical tasks that surround the use and implementation of CAM software, CNC Machining of complex parts, and working on multi Axis CNC Machines. The Engineer will also work with pre-sales to assist on quotes for customers application. Being flexible to work on multiple tasks at one time. What You Will Contribute: Using a 5 axis Mill turn machine to complete complex parts Aerospace experience in materials, feeds and speeds, processing and setup is a requirement Making accurate engineering reports, and interpreting plans and specifications Developing/ implementing custom demonstrations and training customers in the safe set up and operation of CNC machining centers, lathes, or multi-tasking machines Possessing and maintaining an in-depth knowledge of machine tool industry and product lines represented by the company Provide technical support to existing customers Documentation for engineering systems Customer part programs and training. Other Function Perform related duties as required The duties listed above are intended only as an illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. Qualifications & Competencies: A.S/B.S. in Mechanical Engineering or 10 years of related field service 8-10 years industry experience as a CNC Programmer, Manufacturing Engineer, Applications Engineer, etc. 8-10 years CAD/CAM Experience Experience with CNC machining, part programming and knowledge of the manufacturing industry Cross functional team collaboration Exceptional written and verbal communication skills (word, excel, power point) Pragmatic problem-solving skills Preferred Qualifications: NX/UG, SolidWorks, Esprit, or Master CAM experience preferred, but any 3D CAD software experience is a plus Intimate knowledge of modern tooling and work holding solutions Expertise with various Machine Tool brands and commonly used controls (Okuma)(Fanuc) What's in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: • Competitive starting salary • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance • 3+ Weeks' Vacation to Start • 10 Company Paid Holidays • 401(k) retirement plan with company contribution • Tuition reimbursement • Employee appreciation events and perks • Employee Assistance Program Mental and physical requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises. • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. • Ability to sit for prolonged period of times. • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. • Ability to frequently use hands and arms. • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. • Ability to keep their composure with the public and co-workers in everyday, stressful situations. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #1313B (Roanoke, VA)

Job Description Join Amsted Rail - Petersburg, VA Brenco Bearing & Amsted Seals Divisions Amsted Rail Company, a global leader in freight rail solutions and an Amsted Industries business, is a 100% employee-owned company. Amsted Rail Petersburg is a global leader in tapered roller bearings and precision sealing solutions. We offer stability, growth, and the opportunity to make a real impact on our industries and communities. As part of one of the top five employee-owned companies in the U.S., you'll benefit directly from our success through annual stock awards and competitive compensation. If you want to make an impact, have a sense of community and desire to grow, then you should apply today to our opening for a Spacer Lathe Operator. POSITION SUMMARY The Spacer Lathe Operator operates and maintains a line to produce precision parts. The position applies technical skill and knowledge of procedures to set up, operate and monitor the Spacer Lathe cell to produce quality spacers. Producing and verifying spacers meet the customer's expectations while providing troubleshooting support to maintain equipment uptime. ESSENTIAL FUNCTIONS To accomplish this job successfully, an individual must be able to perform the essential functions listed below satisfactorily with or without accommodation. Machine Operation: Set up, operate, and tend equipment to produce work pieces meeting quality and volume expectations. Setup & Adjustment: Read and interpret prints and standard operating procedures to ensure product meets operational efficiency and production schedule. Quality Control: Observe operations, measure dimensions of processed work pieces to ensure conformance to specifications, using gauges or other measuring devices, and make adjustments to meet quality standards. Material Handling: Load/unload workpieces and move materials as needed (may require mobile equipment). Maintenance: Perform routine preventive maintenance, clean machines, and troubleshoot malfunctions, calling for repairs when necessary. Safety & Documentation: Adhere to all safety procedures, maintain a clean work area, and complete production logs and reports (hard copy or electronic). Department Specific Functions Mount, install, align, and secure tools, attachments, fixtures on machines, using hand tools and precision measuring instruments. Remove and replace dull cutting inserts. Listen to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration and take appropriate action. Work with minimal supervision and consistently produce repeat parts accurately within specifications. Perform other duties, as assigned. QUALIFICATIONS To be considered a candidate must be able to meet the following qualifications: Successfully pass a pre-employment drug & background screening Lift, push & pull 10 to 50 lbs. Wear department required, employer provided, personal protection equipment (PPE) Regularly stand and move throughout the department and shift Mechanical aptitude and prior industrial experience a plus Why Choose Amsted Rail Petersburg? Employee Ownership: Annual stock awards (10% of compensation) 401(k) Match: Up to 4% dollar-for-dollar Comprehensive Benefits: Medical, dental, vision, HSA with company contributions, life insurance, disability coverage, and pet insurance available after 30 days Competitive Pay: Competitive hourly rate considering prior experience, plus annual bonus eligibility potential Career Growth: On the job training, pay for skill and advancement opportunities Work-Life Balance: Paid Time Off (PTO) starting at 3 weeks of PTO, 11 paid holidays, flexible for evening or night shift schedule Additional Offerings: Tuition Reimbursement, Referral Bonuses, Employee Discount Programs Amsted Rail's commitment to Affirmative Action: Amsted Rail is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. To review our EEO Policies or to request assistance please go to *************************** and select EEO Compliance/Statements. To learn more about us, please visit us online at ******************* #ff-dd-ov

With over 85 years as an industrial technology leader, Kennametal Inc. delivers productivity to customers through materials science, tooling and wear-resistant solutions. Customers across aerospace and defense, earthworks, energy, general engineering and transportation turn to Kennametal to help them manufacture with precision and efficiency. Learn more at kennametal.com. Follow @Kennametal: Instagram, Facebook, LinkedIn and YouTube. CNC Operator - Entry New Market, VA 2nd shift: 2:45pm - 11:15pm or 3rd shift: 10:45pm - 7:15am Summary Operating an automated machine such as a CNC or other machine via either a single step or process that does not include a multi-step or multi- production process. Sets up complex, customized production equipment to manufacture company products. Duties * Manufactures sufficient quantities of quality products at or below budgeted production costs in order to meet marketplace demand. * Sets up equipment operation feed, speed, and temperature; follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials. * Selects and measures raw materials and parts to specifications to prepare for production processing. • Resolves issues related to the organization's production, machinery, processing, and/or packaging operations.• May include basic level programming• Set up and operate, in an efficient timely manner, machine tools, such as mill-turns, mills, lathes, or grinders.• Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines. • Work from and read blueprints as well as setting and checking work to various quality control gages. * Move all materials, either physically or mechanically, necessary to complete assignments * Perform inspection of machined products by selecting and setting up precision gaging to ensure external and internal quality specifications and requirements * Set-up and perform a series of machining operations on all CNC machines. * Select proper cutters, determine adjusts feeds and speeds as needed, and replace cutters when dull. * May Operate two or more CNC machines simultaneously * Responsibilities are within the Manufacturing/Operations Function as a generalist or in a combination of Disciplines. ● Performs specialized technical tasks required to support operations (e.g., IT development, research support, skilled trade) Experience * High School Degree * 1-3 years experience * Machine operation experience • Requires vocational training or the equivalent experience and may require external certification but typically does not require a university degree• Technical school certification or Apprenticeship program of completion preferred.• Manufacturing experience of 1 - 3 years automated/CNC work experience required. Knowledge, Skills, Abilities * Basic troubleshooting and decision-making skills. * Ability to modify G code programs. * Ability to handle basic or standard CNC complexity. • Has working knowledge and skills to perform a defined set of analytical/scientific methods or operational processes.• Applies experience and skills to complete assigned work within own area of expertise.• Works within standard operating procedures and/or scientific methods.• Receive verbal and written information.• Complete all necessary documentation, electronic data entries, and communications accurately and timely. * Understand written instructions and be willing and able to communicate those instructions to others. * Read process instructions and drawings and recognize/attend to details. * Adhere to and follow all company safety policies and procedures to assure commitment to a 100% safe work environment. * Support the Lean Enterprise initiatives and continuously strive to improve customer satisfaction through improved quality, reduction in waste, and improved productivity. * Intermediate knowledge of Geometric Dimensioning & Tolerancing (GD&T) methods of dimensioning, as well as proper use and care of precision measurement tools. * Knowledge of shop math, including geometry and conversions. * Manufacturing and product knowledge. * Proven troubleshooting, decision-making skills, and the ability to work in a team-based environment. * Interpersonal skills with good communication working in a team environment. Complexity * Not much variability to day to day operation tasks * Works with a moderate degree of supervision Kennametal Inc. is an Equal Employment Opportunity employer.

Join Reynolds Consumer Products…and Drive Your Career across a world of opportunities! We provide amazing job opportunities for growth with competitive hourly pay and benefits in an exciting, dynamic, fast-paced, and fun workplace environment. Are you looking to build a strong career? Then we have an opportunity for you! We currently have an opportunity for a Machinist to join our team at our manufacturing facility in Richmond, VA. Pay: $35.17 /hour Responsibilities Your Role: As a Journeyman Machinist, you will be responsible for maintaining, troubleshooting and repairing mechanical, pneumatic, and hydraulic systems and equipment associated with all primary production, auxiliary and support equipment using a wide variety of hand and power tools, technical manuals, blueprints, drawings, and other documentation. You will have the opportunity to Make Great Things Happen! Perform preventive maintenance and basic construction work (rigging, installation and demolition) and operate machine shop equipment. Follow all prescribed safety precautions, procedures, standards and regulations; work with operators, craftsman and contractors to resolve technical issues. Gather, review and analyze information to identify and/or resolve problems. Perform complex machining operations on many kinds of shop tools; drill press, lathes, milling machines, boring machines, precision grinding machines and numerous shop hand tools, to include precision measuring tools. Work independently, with others, or in groups. You will love it here if… You put safety first, always You listen, learn, and evolve You are passionate about collaboration, teamwork, and achieving shared goals You treat all people with respect, operating ethically, and embrace inclusivity You are committed to improving our impact on local communities What we have to offer you here at Reynolds Wisely Pay Card - so you can get your money fast Comprehensive Benefits Plan (Medical, Dental, and Vision) Wellness Program that pays you back up to $1,000 a year! 401K PTO Tuition Assistance Employee Referral Program earn up to $1,000 Life Insurance Employee Resource Program Paid Parental Leave Adoption Assistance Infertility Coverage Enhanced Musculoskeletal Wellness Program Requirements We need you to have: High School diploma or GED. A formal machinist or related mechanical apprenticeship with three (3) or more years of experience as a machinist/industrial mechanic in a high speed manufacturing environment; or the equivalent experience/training and proficiency with five (5) or more years of experience as a machinist / industrial mechanic in a high speed manufacturing environment; OR An Associate's degree in Mechanical Engineering Technology with three (3) years of experience as a machinist / industrial mechanic in a high speed manufacturing environment. Skills to machine precision parts from detailed blueprints and sketches with specified tolerances. Knowledge of the operation or use of related specialized tools and equipment. Ability to climb and work in high or confined spaces. Good communication skills, both oral & written, and the ability to carry out instructions when given verbally or in writing. Ability to work in a 24/7 work scheduled manufacturing facility including off-shifts. Icing on the cake: Millwright Experience. Want to know more? Check out our website or connect with us on LinkedIn! Apply today to join a fast-growing innovative company! Not a good fit but know someone who is? Please refer them! Local candidates only, no relocation assistance available Join Reynolds Consumer Products and Drive Your Career across a world of opportunities! For applicants or employees who are disabled or require a reasonable accommodation for any part of the application or hiring process, you may request assistance by emailing us at ******************************. No recruiter calls or emails please. RCP affords equal employment opportunities to applicants without regard to race, color, religion, age, disability status, sex, marital status, protected veteran status, pregnancy, national origin, genetics, genetic information, parental status, or any other characteristic protected by federal, state or local law. RCP conforms to the spirit as well as to the letter of all applicable laws and regulations. Pay Range USD $35.17 - USD $35.17 /H

Are you looking for an exciting new opportunity in your career? Are you interested in being a part of the growing field in the Composites/Aerospace industry? Does it fascinate you to think that something you helped make could be flying through the sky? Then we have the opportunity for you! EURO-COMPOSITES Corporation is looking for a CNC Operator to join their team! EURO-COMPOSITES Corporation, located in Culpeper, Virginia, is one of the global leading manufacturers of lightweight composite products based on honeycomb core. The product range consists of various types of honeycomb, panels, formed, milled parts and drop-in parts for a wide range of industries and especially for the aeronautical industry. Job Title: CNC Operator Department: Production - Value Added - CNC Location: EURO-COMPOSITES Corporation; Culpeper, VA Employment Type: Regular Full-Time Position JOB SUMMARY includes, but not limited to: Summary/Objective: The CNC Operator is responsible for producing machined parts by set up and operation of a Computer Numerical Control (CNC) machine; maintaining Aerospace quality and safety standards; keeping records; maintaining equipment and supplies. Essential Functions Loading machine programs. Set Up tools, load tools and materials in machine. Usage and manipulation of basic M & G codes. Proper part handling, cleaning and inspection. Proper application and removal of stabilizing aids. Calculate and adjust for depth tolerances. Completion of all applicable paperwork and documentation Able to work evenings and weekends Lifting up to 50 pounds unassisted Working with various hand tools and chemicals Reaching, bending, climbing Visually inspecting parts Required Education and Experience High school diploma or equivalent Strong attention to accuracy and precision Knowledge of industry safety standards Previous fork truck certification and experience a plus Open availability, including weekends Must agree to pre-employment screenings Able to interpret blueprints Understanding of industry safety standards Understanding of basic mathematics and use of standard measuring tools Ability to work well with others and take direction Must be self-motivated and willing to take initiative Must be able to work nights and weekends (per company needs) Salary Information: Hourly, non-exempt Starting rate $18.00/hr commensurate with experience Why Work for EURO-COMPOSITES Corporation? Medical, Dental, and Vision Plans Generous Vacation and Personal Time 10 Paid Holidays HSA and 401K Contributions and Matching Free Life Insurance for all employees Free Teladoc for all Employees Employee Assistance Program Uniforms and Safety Shoes Provided

We are seeking a Weekday CNC Machinist to join our team near Frederick, CO! Our machining expertise focuses on everything from prototyping to full scale production work serving industries ranging from aerospace and military/ defense to telecommunications! Shift: Days, Monday- Friday Pay: $25-$30/hr DOE Desired skillset: 2+ years of set up and operation experience Ideally exposure to both mills and lathes Programming experience would be a plus but not a requirement Dimensional inspection experience such as calipers, micrometers, etc At ROLINC Staffing & Search, we connect great job seekers with great companies along the Colorado Front Range and beyond! Since 1991, we've specialized in matching skilled trades talent with manufacturing, distribution, and construction companies - providing temp-to-hire, direct hire, and career-advancing opportunities. Originally founded as Resumes On-Line, Inc., we evolved into a niche staffing firm focused on building strong teams in hands-on industries. Ready for your next great job? Apply with ROLINC today!

Manual Machinist Summary/Objective The Manual Machinist sets up and operates manually controlled machines in skilled precision and bench work in the fabrication, maintenance, repair and alteration of machinery, machine parts, tools and equipment. Responsibilities and Duties Primary Duties and Responsibilities The Manual Machinist performs a wide range of duties including some or all of the following: Perform all tasks in a safe and responsible manner Read and interpret blueprints Use gauges and measuring instruments to meet tolerance requirements Use precision tools, machinery and equipment such as lathe, manual milling machine, drill press, hydraulic press, band saw, and a variety of cutting tools and equipment Fabricate and shape parts such as tools and machine parts out of metal. Properly and safely select, align, secure and remove holding fixtures, cutting tools, attachments, accessories and materials onto machines Recognize, deploy and properly use inserts, fixtures and tooling Perform daily and regular cleaning and light maintenance tasks on machinery and equipment Ability to track parts and jobs in company's system Maintain safe and clean working environment by complying with procedures, rules, and regulations. Contribute to team effort by accomplishing related results as needed Qualifications and Skills Qualifications Education Requirements High School Diploma or equivalent required Experience Requirements 2-3 years of machining experience Basic computer skills Knowledge, skills and abilities Knowledge of and experience with machine and tools, including their design, uses, repair and maintenance Design techniques, tools and principals involved in the production of precision technical plans and drawings Metals and the quality and machinability and uses of metals, alloys and other materials Mechanically inclined, and understand manufacturing techniques Ability to prioritize, schedule and review work Effectively and safely operate a variety of assigned tools and equipment Interpret blueprints, shop drawings, sketches and work orders to others Maintain routine records Ability to move or transfer products with a hoist or overhead crane. Attention to detail Ability to work on multiple priorities with frequent interruptions Ability to work in a fast-paced environment Ability to work independently without daily supervision Working Conditions The work environment is in a manufacturing facility where noise level is usually moderate Work is performed while standing, sitting and/or walking. Requires the use of hands for simple handling, grasping and fine manipulations Requires the ability to lift, carry, push or pull medium weights, up to 50 pounds Requires standing for long periods of time Requires making repetitive motions while operating equipment. Requires activities involving being around moving machinery Work a standard work week but may be required to work some overtime Benefits Full benefit package including medical, dental, vision, employee stock ownership plan, short term and long term disability and life insurance. Job Type: Full-time Experience: Manual Machining: 2 years (Preferred) Education: High school or equivalent (Required)

Requirements ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status. SKILL REQUIREMENTS: Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Ability to read, write, and communicate in the English language Must be a team player and willing to learn new skills and concepts QUALIFICATIONS: 5 years experience in machining and with quality processes is desired Some exposure and experience with manufacturing /CNC machining processes Understand continuous improvement or lean / six sigma principles WORK ENVIRONMENT: The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment. For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility. PHYSICAL DEMANDS: Sit or stand as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday. Proper lifting techniques required. SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. AFFIRMATIVE ACTION: ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at-will status of the employee. Salary Description $32 -$42

Job Description Netzer Metalworks is currently hiring machinists Medical and Dental Benefits, 401k, Paid Holidays Climate controlled facility. 5 years + experience recommended. - Set up and operate various machine tools to produce precision parts - Read and interpret blueprints, sketches, and engineering specifications - Use hand tools, power tools, and measuring instruments to perform machining operations - High school diploma or equivalent - Minimum of 2 years of experience as a machinist in a manufacturing environment - Strong knowledge of machining techniques, tooling, and materials - Ability to lift heavy objects and stand for extended periods of time - Perform other duties as assigned to maintain efficiency throughout the company. - Training available. - Ability to use Standard measuring Equipment i.e. Micrometers, Calipers, Height Gauges Powered by JazzHR 1sSGzI1ToR

Alliance Machine & Engraving, LLC is a division of The Bradbury Group specializing in engraving and embossing equipment located in Ashland, VA, just outside of Richmond. Responsible for operating manual machinery, including engine lathes and cylindrical grinders, to produce precision metal parts to blueprint or job order specifications. Essential Functions: Studies prints and job orders for product specifications such as dimensions and tolerances, and tooling instructions such as fixtures, feed rates, cutting speeds, depth of cut and determines sequence of operations. Layout dimensions on parts per prints. Setup and operate machinery to cut shape or form metal to specifications and ensure conformity of finished work. Assemble and fit machine components with use of hand and power tools May be required to learn and operate drills, grinders, mills, lathes, forklifts, overhead hoists, and other equipment as needed. Perform other duties as assigned. Skills & Abilities Required/Preferred: Strong mechanical aptitude Able to use and understand all precision measuring instruments Understands basic math concepts Ability to read schematics and blueprints, bills of materials, setup sheets, etc. Machine painting Education/Training Required/Preferred: Prefer successful completion of related course work at a trade or technical school Prefer auto (or other) mechanic background Other Requirements/Preferences: Takes pride in work performed Supply own hand tools Ability to change assignments frequently Is consistently at work on time and ensures work responsibilities are covered when absent Follows instruction, responds to management direction Takes responsibility for own actions Commits to overtime hours when necessary to reach customer requirements Completes tasks on time Regular Working Hours: 6:00 am - 2:30 pm M-F, 6:00 am - 4:30 pm when on overtime. Benefits: Competitive salary with annual performance evaluations Health Insurance Health, dental, vision, and prescription drug insurance No Waiting Period Coverage starts on the first of the next month following day 1 of employment Company-Paid Life Insurance Roth & 401(k) + Company Match PTO All new hires start with 80 hours of PTO on Day 1 Paid Holidays Safety Shoe Allowance of $175/yr Tuition Reimbursement

Summary/Objective The Manual Machinist sets up and operates manually controlled machines in skilled precision and bench work in the fabrication, maintenance, repair and alteration of machinery, machine parts, tools and equipment. Responsibilities and Duties Primary Duties and Responsibilities The Manual Machinist performs a wide range of duties including some or all of the following: Perform all tasks in a safe and responsible manner Read and interpret blueprints Use gauges and measuring instruments to meet tolerance requirements Use precision tools, machinery and equipment such as lathe, manual milling machine, drill press, hydraulic press, band saw, and a variety of cutting tools and equipment Fabricate and shape parts such as tools and machine parts out of metal. Properly and safely select, align, secure and remove holding fixtures, cutting tools, attachments, accessories and materials onto machines Recognize, deploy and properly use inserts, fixtures and tooling Perform daily and regular cleaning and light maintenance tasks on machinery and equipment Ability to track parts and jobs in company's system Maintain safe and clean working environment by complying with procedures, rules, and regulations. Contribute to team effort by accomplishing related results as needed Qualifications and Skills Qualifications Education Requirements High School Diploma or equivalent required Experience Requirements 2-3 years of machining experience Basic computer skills Knowledge, skills and abilities Knowledge of and experience with machine and tools, including their design, uses, repair and maintenance Design techniques, tools and principals involved in the production of precision technical plans and drawings Metals and the quality and machinability and uses of metals, alloys and other materials Mechanically inclined, and understand manufacturing techniques Ability to prioritize, schedule and review work Effectively and safely operate a variety of assigned tools and equipment Interpret blueprints, shop drawings, sketches and work orders to others Maintain routine records Ability to move or transfer products with a hoist or overhead crane. Attention to detail Ability to work on multiple priorities with frequent interruptions Ability to work in a fast-paced environment Ability to work independently without daily supervision Working Conditions The work environment is in a manufacturing facility where noise level is usually moderate Work is performed while standing, sitting and/or walking. Requires the use of hands for simple handling, grasping and fine manipulations Requires the ability to lift, carry, push or pull medium weights, up to 50 pounds Requires standing for long periods of time Requires making repetitive motions while operating equipment. Requires activities involving being around moving machinery Work a standard work week but may be required to work some overtime Benefits Full benefit package including medical, dental, vision, employee stock ownership plan, short term and long term disability and life insurance. Job Type: Full-time Experience: Manual Machining: 2 years (Preferred) Education: High school or equivalent (Required)

Alliance Machine & Engraving, LLC is a division of The Bradbury Group specializing in engraving and embossing equipment located in Ashland, VA, just outside of Richmond. Responsible for operating manual machinery, including engine lathes and cylindrical grinders, to produce precision metal parts to blueprint or job order specifications. Essential Functions: * Studies prints and job orders for product specifications such as dimensions and tolerances, and tooling instructions such as fixtures, feed rates, cutting speeds, depth of cut and determines sequence of operations. * Layout dimensions on parts per prints. * Setup and operate machinery to cut shape or form metal to specifications and ensure conformity of finished work. * Assemble and fit machine components with use of hand and power tools * May be required to learn and operate drills, grinders, mills, lathes, forklifts, overhead hoists, and other equipment as needed. * Perform other duties as assigned. Skills & Abilities Required/Preferred: * Strong mechanical aptitude * Able to use and understand all precision measuring instruments * Understands basic math concepts * Ability to read schematics and blueprints, bills of materials, setup sheets, etc. * Machine painting Education/Training Required/Preferred: * Prefer successful completion of related course work at a trade or technical school * Prefer auto (or other) mechanic background Other Requirements/Preferences: * Takes pride in work performed * Supply own hand tools * Ability to change assignments frequently * Is consistently at work on time and ensures work responsibilities are covered when absent * Follows instruction, responds to management direction * Takes responsibility for own actions * Commits to overtime hours when necessary to reach customer requirements * Completes tasks on time Regular Working Hours: 6:00 am - 2:30 pm M-F, 6:00 am - 4:30 pm when on overtime. Benefits: * Competitive salary with annual performance evaluations * Health Insurance * Health, dental, vision, and prescription drug insurance * No Waiting Period * Coverage starts on the first of the next month following day 1 of employment * Company-Paid Life Insurance * Roth & 401(k) + Company Match * PTO * All new hires start with 80 hours of PTO on Day 1 * Paid Holidays * Safety Shoe Allowance of $175/yr * Tuition Reimbursement