Computer numerical controller machinist jobs in Warsaw, IN

NIBCO is a recognized leader in the flow control industry. Headquartered in Northern Indiana, with a manufacturing history that spans over a century, NIBCO operates manufacturing facilities across the United States, as well as Mexico and Poland. NIBCO is known by our customers for exceptional quality, commitment to on-time delivery, and outstanding product innovation. Setting us apart from our competitors is our people. If you're looking for a place where your hard work and great ideas make a difference--NIBCO is the place for you. POSITION INFO: This hands-on role supports the Engineering Test Lab by machining precision components using CNC and manual equipment. The primary responsibility is operating a CNC lathe to fabricate prototype and small batch production parts. Secondary duties include assisting with product testing, calibration of equipment, and maintaining lab standards. MAZAK CNC programming experience is a strong asset. RESPONSIBILITIES: Primary Responsibilities - CNC & Machining ● Set up and operate CNC lathes and manual equipment (mills, lathes, drill presses, grinders) to produce high-precision components ● Interpret blueprints, engineering drawings, and specifications to plan machining operations ● Maintain tight tolerances on metal and plastic workpieces ● Conduct inspections using micrometers, calipers, dial indicators ● Perform routine machine maintenance and minor repairs as needed ● Collaborate with engineering teams during prototype and small-batch manufacturing Secondary Responsibilities - Testing & Calibration ● Support engineering lab testing processes including setup and operation of test equipment ● Calibrate hand gauges and precision instruments ● Fabricate basic fixtures to support testing activities ● Record clear and accurate test data and communicate results EXPERIENCE: Minimum of 2 years CNC machining experience required; MAZAK programming a plus EDUCATION: High School/GED required; machining or manufacturing technical training preferred TRAINING AND SKILLS: Technical Skills: CNC lathe operation, manual machining, blueprint reading, tolerancing, micrometers, calipers, dial indicators, specialty gages Technical Aptitude: Mechanical troubleshooting, tooling knowledge, fabrication Soft Skills: Detail-oriented, self-driven, strong communication, teamwork PHYSICAL DEMANDS / ENVIRONMENTAL FACTORS: Capable of lifting 50 lbs., manual dexterity, focused on precision NIBCO is committed to equal opportunity employment. It is the policy of NIBCO to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. Quality Products Since 1904 A recognized brand leader bringing flow control products and technologies to market, NIBCO has a history of success and innovation in the plumbing industry. Headquartered in Elkhart, Indiana, we operate multiple manufacturing plants and distribution centers strategically located throughout the United States and globally, and offer more than 36,000 SKUs, including our NIBCO family brands, Webstone, Chemtrol and Sure Seal. Today, NIBCO is a fifth-generation, family- and associate-owned business. Since 1904, we've pioneered many quality products and processes.

Aerospace Machine Shop - Direct Hire Openings (Not Temp/Contract) Grinders - 4 Openings Swiss - 2 Openings Turn - 1 Opening (days) Shifts: Openings on 1st and 2nd + OT Available Pay: Base pay up to $32/hr+ benefits + bonuses + shift premium In these role, you will: Set up and operate Interpret blueprints, schematics, and technical manuals Use measurement tools (calipers, micrometers, etc.) to ensure precision Apply your knowledge of GD&T to maintain high quality standards Collaborate with a team focused on continuous improvement and craftsmanship What We're Looking For: 5+ years of relevant experience History of longevity in roles A passion for delivering high-quality work If you're looking for a place where your expertise is valued and your growth is supported, this could be the opportunity you've been waiting for. Apply today!

At AAM, the POWER is in our people. We believe that an equitable and inclusive workplace benefits everyone, and that the diversity of our Associates drives creativity and innovation. Our global team is made of dreamers, doers and innovators who are Delivering POWER for a safer, brighter and more sustainable tomorrow. Job Posting Title CNC Machine Operator-1 Summary Our Machine Operators fill a vital role in the manufacturing process, as they machine the components for our products and act as the first line of defense in the quality control process. They work as a team to produce high quality components, catch errors, and resolve issues on the fly throughout each day. They take ownership of their work and strive to produce the very best each day. We are seeking an experienced Machine Operator who takes pride in their work and enjoys being in an engaging environment where their input and suggestions are valued. If this sounds like you, please keep reading! Job Description PRINCIPAL DUTIES AND RESPONSIBILITIES: Obtain raw materials from the Material Handler and place them at your machining station. Run the first piece and verify that it meets all of the specifications. Receive confirmation from the Department Supervisor or Quality Associate before running the batch. Operate machine to run the batch of components, continually verifying that the produced parts meet all quality standards and specifications. Use gauges to ensure produced components meet all specifications and requirements. Make mechanical adjustments as necessary to keep parts within specifications Complete SPC charts and attribute chart (list of gauging and dimensions to be checked) Pack finished products as instructed Complete all needed documentation and tagging for each tub of materials. Perform routine preventative maintenance on your machines. (Adding oils and fluids as needed, cleaning, and changing bits) Keep a safety first mindset by following all safety rules and operating in a safe manner. Keep work area in a clean and orderly condition. Perform other related duties as assigned TECHNICAL SKILLS: Ability to interpret specifications and drawings, and blueprints Knowledge of the Metric System (Microns, Millimeters, etc) Able to use gauges to measure parts and ensure they stay within the acceptable tolerances Basic math skills (addition and subtraction of decimal numbers) Able to troubleshoot issues in a timely manner and know when to ask for help Ability to work in a team environment. Required Skills and Education EDUCATION / WORK EXPERIENCE: Experience as a Machinist (Preferred) CNC Machining Experience (Preferred About AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Headquartered in Detroit with over 80 facilities in 18 countries, we are Bringing the Future Faster for a safer and more sustainable tomorrow. To learn more, visit AAM.com. Why Join #TeamAAM: As a member of #TeamAAM, you'll get to make a difference on day one. From your first day with us, you'll have the opportunity to grow, embrace challenges, build your skills, and bring your authentic self to work every day, all while helping to shape the future of mobility for AAM…and the world. AAM will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. AAM will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e-mail *************************. AAM is an equal opportunity/affirmative action employer.

Sabert is looking for a CNC Machinist to join our team! Payrate: $23.50 - $28.10 Basic Function In this position, the candidate will perform all functions necessary to program, prepare and machine new product prototypes and production tooling components in a fast-paced work environment for the New Product Development department while maintaining a safe, organized and clean environment in the tool room. The number one goal is to maintain an aggressive schedule and provide consistent, high quality machined prototype tooling, components, and mold modifications to the standards of both Sabert and its customers. Essential Duties and Responsibilities * To perform all duties required to accurately program supplied CAD models, machine and fabricate new products for the plastic thermoforming industry including but not limited to quality prototyping, assists, modifications, tool upgrades, repair of production tooling, test fixtures, jigs, to support the NPD department and manufacturing. * Responsible for all CNC functions and Operations including: Programming, part setup, tool calibration, cutting parameters, file management, and file storage management. * Adherence to the schedule of jobs to maximize CNC equipment utilization with flexibility to adjust priorities. * Ability to design and fabricate plugs, assists, jigs, test components as requested. * Polishing, venting, drill and tapping as needed. * Interface with designers, engineers, manufacturing and shop personnel. * Manual setup and operation of Bridgeport milling machines as needed * Manual setup and operation of horizontal lathes, table saw, drill press, and other equipment standard to a tool shop. * Materials include aluminum, steel, Renshape polyurethane, epoxy, syntactic foams. * Maintain condition of CNC machinery and inventory of all tools required for efficient machine operation including: cutters, holders, drills, chucks, collets, clamps, taps, etc. * Ensure that all new tools are of the highest quality and have been inspected to meet the specifications. * Offer recommendations that will help improve the reliability, speed of the shop including process improvement input for quality, tooling and design. * Maintain metrics for programming and machine utilization to report to the tool room manager. * Determine items that need to be purchased or replaced, and submit requisition to the tool room manager for approval. * Perform all work in a manner consistent with established procedures for safety to the individual and the team. * Efficiently and accurately fabricate new tooling and sampling in a safe, organized and clean environment. * Deliver and pick up of equipment, parts, and tools for repairs * Use of hand and power tools Required Knowledge, Skills and Abilities * CNC programming / machinist skill using Mastercam as the primary CAM software. * Firsthand knowledge of G and M CNC programming skill and ability to operate CNC equipment. * Machining skills, close tolerance lathe and mill work, reading blueprints, utilization of close tolerance measuring equipment (dial caliper, micrometers, etc.) ban saw, table saw, etc. Qualifications * Devoted work ethic (willingness to work extended hours when required) * Technical understanding of Thermoforming Tooling and Equipment * Experience with MS Office - Excel, Word, Outlook, etc. * Sense of Urgency and thoroughness * Proactive and Innovative thinker * Goal and detail oriented * Safety and Quality conscious * Good reporting, communication, and interpersonal skills * Willingness to learn, grow and contribute with the department * Ability to be a team player and work with others. Physical Characteristics * Lift up to 70 lbs. * Good manual dexterity * Mental alertness and good vision * Able to retain new information and part names * Standing on feet up to 8 + hours a day * Withstand extreme heat temperatures occasionally * Work in a continuous production environment Education * High School Diploma, GED or equivalent. * 1-5+ years machinist experience * Mastercam experience a plus Schedule * Monday to Friday, 7am to 3:30pm

+ Set up and run CNC machine (Makino's/Okuma's) holding tight tolerances as low as +/- .002. + Ability to interact with computer-based controllers to enter or edit job offsets/programs. + Operations performed include, but are not limited to, indicating of fixtures, offsetting of fixtures, milling, drilling, and grinding (of interior diameter) while maintaining specific tolerances and measurements. + In addition to machining, operator also air weighs and uses CNC etching machine to etch permanent serial number on discs following each machining cycle. + Work must be completed within specific timeframes depending on production schedules. + Processes also involve using, reading, and interpreting gages such as, but not limited to, hand gages, hard gages, CMM's, and touch-off probes to complete and validate work. + Understand and interpret complex blueprints, specifications, and operating instructions before and while running operations. + Inspect parts, ensuring product meets specified quality standards. + Responsible to complete related quality documents/work instructions upon completion of tasks. + Demonstrate safe work habits. + Maintain equipment and work area in a clean and orderly manner using the standard work outlined for the area. + As a team member, demonstrate the ability to troubleshoot and resolve problems leading to continual process improvements and effectiveness of the team. **YOU MUST HAVE** + High School graduate or equivalent experience + Due to Federal regulations, candidate must be either a US Citizen or a Lawful Permanent Resident + 3+ years experience of setting up & operating CNC equipment + In lieu of 3 years of set-up & operation experience, an associates machining technology degree is acceptable. + Computer skills that demonstrate the ability to use CNC interfaces to read, run and edit computer-based machine job programs + Math skills that demonstrate a basic understanding of arithmetic + Basic reading and writing skills + Ability to read and understand blueprints and measuring gages + Ability to lift up to 35 pounds + Possesses solid teaming and communication skills + Excellent attention to detail and can follow written, verbal, standard work instructions + Good time-management skills + Ability to focus on quality while executing job tasks The annual base pay for this position is **$31.14/hour to start, $31.64/hour after qualifying, with a $0.75/hour differential for 2nd/3rd shift.** Please note that this salary information serves as a general guideline. Honeywell considers various factors when extending an offer, including but not limited to the scope and responsibilities of the position, the candidate's work experience, education and training, key skills, as well as market and business considerations. This position is a **2nd or 3rd shift** role. **U.S. PERSON REQUIREMENTS** **Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S.** The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Posting Updated 9/30/25. **BENEFITS OF WORKING FOR HONEYWELL** In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: benefits.honeywell.com Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.

CNC Swiss Lathe Machinist 2nd or weekend shift The CNC Swiss Machinist is responsible for setting up, operating, and maintaining CNC Swiss-style lathe machines for the production of medical instruments and implants. This role includes part fabrication, deburring, inspection, and troubleshooting, as well as supporting new product introductions (NPI) through program debugging and setup optimization. The position requires proactive problem-solving to address production gaps, ensure on-time delivery, and uphold quality standards. What You'll Do: Perform machine setups, changeovers, and CNC program debugging, including necessary machine adjustments and tool changes. Operate and maintain CNC Swiss-style machines, finishing machines, hand tools, and fixtures; perform burr removal as required. Read and interpret blueprints, inspection check-sheets, and work instructions. Use inspection tools such as calipers, micrometers, height stands, and comparators. Utilize ERP and machine monitoring systems to manage work orders, monitor production, and document quality checks electronically. Provide detailed feedback to CNC programmers and ensure setup documentation is current, following change control procedures. Provide guidance to team members within assigned areas to maximize the utilization and production attainment of the CNC equipment. Support the training of other team members in your area of responsibility as needed. Drive continuous improvements towards quality and delivery within the work area. Execute the production plan to ensure on-time delivery to customers What You'll Need: High School Diploma or equivalent required; advanced technical training preferred. Minimum of 5 years' experience operating Swiss-style lathes in a manufacturing environment. Experience with Citizen, Tsugami, or similar Swiss-style machines preferred. Comprehensive knowledge of machinery, tooling, measuring, and gauging equipment relevant to assigned areas, with a deep understanding of production processes. Expertise in machinery setups, blueprint reading, routers, and setup files. Understanding of part requirements to ensure quality assembly, both functionally and cosmetically. Understanding basic CNC programming. Strong verbal communication skills with the ability to interact effectively across all levels of the organization, including production, management, and technical professionals. Familiarity with lean manufacturing concepts and objectives. Ability to follow instructions and execute tasks as directed by the Supervisor. Commitment to upholding the company's core values and professional behaviors. Understanding of Avalign's Quality System, including a strong familiarity with Measurement Instruction Sheet layout and purpose, and Avalign's Compliance Policies. Why You'll Love Working Here: At Avalign, we invest in our people. As a Swiss Machinist, you'll get hands-on training, chances to cross-train and earn extra pay, and opportunities to learn new skills like programming, on-site or off-site. You'll work on high-precision medical devices that make a real difference, and we'll help you grow your career with personalized development plans. What You Won't Do: Feel stuck - we offer great opportunities to advance and learn Get bored - we make a high variety of products, so no day is the same Feel like a number - we're a close-knit bunch and always have each other's backs Who You Are: A self-starter who thrives in a fast-paced environment A quick learner who is always ready to gain depth of knowledge in manufacturing processes A reliable individual who knows the importance of showing up when it counts Someone who accept assignments with an open, cooperative, positive and team-oriented approach Someone who is able to plan and execute plans across teams An effective communicator, both written and verbal What You'll Enjoy: Competitive compensation and benefits package Comprehensive medical, dental, and vision insurance Paid vacation and 10 observed paid holidays per year Employer funded Basic Life and AD&D insurance Employer funded STD and LTD insurance Tuition reimbursement Great 401(k) with company match Generous employee referral bonus program Working for a thriving, performance-based company that values promoting from within and career advancement Temperature controlled environment Community involvement investing and giving back to the community Additional free resources such as travel assistance, EAP, etc.

Schafer Industries is a premier supplier of off-highway axles and differentiated precision gearing solutions. Established in 1934, Schafer Industries has locations in South Bend, IN, Roscoe, IL, Fredericktown, OH and Blacklick, OH. Schafer Industries is one of the few manufacturers of integrated axle solutions in the off-highway electric vehicle market. Schafer serves customers in a variety of end markets including off-highway vehicles, recreational vehicles, aerospace, defense, oil & gas, material handling, powertrain, electric mobility, heavy duty trucking, agriculture, and construction. Our mission is to leverage world class capabilities to deliver superior products and services to maximize the value for our customers, employees, shareholders, and communities. Position Summary: Schafer Industries is currently seeking a CNC Lathe Machinist - 1 st Shift for its Schafer Gear Works operation in South Bend, IN. Why Work at Schafer Industries? We are a growth-oriented company with a diversified customer base. We are committed to a culture of safety and continuous improvement. You will enjoy a collaborative work environment where your talents and opinions matter. We provide training as well as opportunities to work on projects in support of your career development. You will quickly see your impact when working with the team. We have competitive pay and benefits to include 401(k) match and tuition reimbursement. We live our values of Safety, Integrity, Responsibility to Others, Customer Focus, Continuous Improvement and Accountability in all that we do. Job Summary: Operates conventional, special purpose, and computer numerical control (CNC) machines to fabricate metallic and non-metallic parts. Responsible for maintaining high productivity rate and meeting quality requirements. Essential Functions: Operate assigned machinery to fabricate parts to the required specifications by: Follow proper machine procedures and instructions. Ensuring proper tooling is used for machine. Creating and sizing jaws on the machine. Changing chucking devices when necessary. Recognizing insert and tool geometry. Making offset adjustments for size. Troubleshoot issues at the machine and make necessary adjustments. Ensures all parts are to the required specifications by: Maintaining and continuously improving the quality of parts produced. Reading blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations, and setup requirements. Verifying conformance of finished work piece specifications. Complying with all work instructions. Following and maintaining ISO, AS, and Schafer procedures. Completing Schafer's quality certification requirements for assigned area. Ensure the operational effectiveness of all assigned equipment by: Conducting all assigned and necessary preventative maintenance procedures. Starting and observing machine operations to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required. Conferring with engineers, production personnel, programmers, or others to resolve machining problems. Responsible for supporting the Schafer Business Process by: Maintaining and continuously improving productivity of assigned machines. Operator multiple machines. Measure, mark, and scribe dimensions and reference points on material or work piece as guides for subsequent machining. Continuously looking at tool life and new tooling to cut costs on tools. Reducing downtime of machines setups. Getting computer setup ready by preparing tooling, fixtures, steel, gages, etc. for jobs located in Kanban locations at assigned machines. Maintaining the 6S program in assigned area. Contributes to the overall effectiveness of the company by: Channeling problems and/or complaints to appropriate person for resolution. Supporting all Schafer policies and procedures. Reporting to Supervisor when assignments cannot be completed. Providing input and assistance with the implementation of quality improvements. Resolving problems. Performing other job-related duties as required. Helping evaluate job applicant's knowledge for the cell prior to Schafer hiring. Passing along vital information in the logbook for subsequent shifts. Training new personnel in the operation of assigned machines. Assisting and/or training in other areas as needed. Knowledge, Skills, Abilities Requires physical ability and stamina to perform the essential functions of the position, including the ability to walk, stand, lift, carry up to 50 pounds, push, kneel, bend, stoop, reach over and under waist level, twist for extended periods of time on cement or other hard surfaces, etc. Demonstrates the verbal and written communication skills necessary to complete forms and take messages in a legible, accurate manner. Minimum of two years' experience as a CNC Lathe or Mill Machinist. Have full depth of knowledge using inspection gaging, such as Micrometers, Calipers, Height Stand, Optical Comparator, etc. Be able to multitask and work in a fast-paced environment. Must be able to communicate in English. Ability to use a computer Working Conditions: Air conditioned/heated manufacturing facility with possible exposure to noise; dust; fumes; physical, chemical, and biohazards; solvents, oils, and detergents. Schafer Industries is an EEO/AAP Employer: Our company is committed to providing equal employment opportunity. This means that we make employment decisions on the basis of job-related qualifications, skills and abilities and not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other basis protected by law.

Full-time Description • Set up and Operate CNC Mills and/or Lathes to produce parts to print • Change cutting tools & inserts as needed • Conduct in process inspections as required • Complete basic machine maintenance such as filling fluid and changing filter • Conduct tasks in accordance with company work instructions. • Ensure work area is neat and clean • Other duties as required. • Programming and/or setup experience desired Requirements Requirements • 2 + years of experience operating Mills and/or Lathes. • 2 + years experience in a manufacturing environment, preferably that makes parts or product for the aerospace industry. • Ability to read and understand blue prints, work instructions and use standard machine shop tools and gages. • Must have great communication skills in English (both verbal & written) • Good interpersonal skills and ability to work effectively with others. • Must be self-motivated and able to work independently on assignments with minimal oversight or direction. • Ability to interact effectively with management and other team members • Ability to work overtime as required.

Essential Duties and Responsibilities include the following. Other duties may be assigned. Proficient with one or more of the following machines: Citizen Swiss A-20, L-20, M32 Operate and set up the machines within the department Periodically inspect parts completed by operators during the production process to monitor consistent dimensional and visual quality Continuously monitor equipment and tooling Follow the instructions on the process sheet, drawings and/or programs Assist others to trouble shoot their work Interface/communicate with Quality, Engineering and other team members as needed Maintain the work area and equipment in a clean and orderly condition and follow prescribed safety regulations Responsible for assuring that assigned activities are performed in accordance with AMS Warsaw Quality System procedures Review programs to eliminate errors and retest programs to check that problems have been solved Observe machines on trial runs or conduct computer simulations to ensure that programs and machinery will function properly and produce items that meet specifications Measure dimensions of finished work pieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction Comply with ECO Process to modify cutting programs to account for problems encountered during operation Competency To perform the job successfully, an individual should demonstrate the following competencies: Ability to set up new work, edit programs, and build fixtures Ability to coach, train and communicate with department personnel Ability to read and interpret blueprints Ability to change tools and offsets Strong mechanical and trouble shooting ability Strong interpersonal skills including, but not limited to, contributing to a team-oriented environment Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Equivalent to high school education, GED, or 5-year related experience or training; or equivalent combination of education and experience. Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Physical Demands Light to moderate physical exertion required Lifting/carrying Maximum lbs.: 50 Frequent lbs.: 1-10 Regularly required to stand, reach, and move about the facility Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Work near moving mechanical parts While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts The noise level in the work environment is usually moderate to loud ADDITIONAL NOTES ARCH Global Precision is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Precision are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Essential Duties and Responsibilities include the following. Other duties may be assigned. Proficient with one or more of the following machines: Citizen Swiss A-20, L-20, M32 Operate and set up the machines within the department Periodically inspect parts completed by operators during the production process to monitor consistent dimensional and visual quality Continuously monitor equipment and tooling Follow the instructions on the process sheet, drawings and/or programs Assist others to trouble shoot their work Interface/communicate with Quality, Engineering and other team members as needed Maintain the work area and equipment in a clean and orderly condition and follow prescribed safety regulations Responsible for assuring that assigned activities are performed in accordance with AMS Warsaw Quality System procedures Review programs to eliminate errors and retest programs to check that problems have been solved Observe machines on trial runs or conduct computer simulations to ensure that programs and machinery will function properly and produce items that meet specifications Measure dimensions of finished work pieces to ensure conformance to specifications, using precision measuring instruments, templates, and fixtures Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction Comply with ECO Process to modify cutting programs to account for problems encountered during operation Competency To perform the job successfully, an individual should demonstrate the following competencies: Ability to set up new work, edit programs, and build fixtures Ability to coach, train and communicate with department personnel Ability to read and interpret blueprints Ability to change tools and offsets Strong mechanical and trouble shooting ability Strong interpersonal skills including, but not limited to, contributing to a team-oriented environment Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Equivalent to high school education, GED, or 5-year related experience or training; or equivalent combination of education and experience. Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Physical Demands Light to moderate physical exertion required Lifting/carrying Maximum lbs.: 50 Frequent lbs.: 1-10 Regularly required to stand, reach, and move about the facility Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Work near moving mechanical parts While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts The noise level in the work environment is usually moderate to loud ADDITIONAL NOTES ARCH Global Precision is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Precision are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

At AAM, the POWER is in our people. We believe that an equitable and inclusive workplace benefits everyone, and that the diversity of our Associates drives creativity and innovation. Our global team is made of dreamers, doers and innovators who are Delivering POWER for a safer, brighter and more sustainable tomorrow. Job Posting Title CNC Machine Operator-1 Summary Our Machine Operators fill a vital role in the manufacturing process, as they machine the components for our products and act as the first line of defense in the quality control process. They work as a team to produce high quality components, catch errors, and resolve issues on the fly throughout each day. They take ownership of their work and strive to produce the very best each day. We are seeking an experienced Machine Operator who takes pride in their work and enjoys being in an engaging environment where their input and suggestions are valued. If this sounds like you, please keep reading! Job Description PRINCIPAL DUTIES AND RESPONSIBILITIES: * Obtain raw materials from the Material Handler and place them at your machining station. * Run the first piece and verify that it meets all of the specifications. Receive confirmation from the Department Supervisor or Quality Associate before running the batch. * Operate machine to run the batch of components, continually verifying that the produced parts meet all quality standards and specifications. * Use gauges to ensure produced components meet all specifications and requirements. * Make mechanical adjustments as necessary to keep parts within specifications * Complete SPC charts and attribute chart (list of gauging and dimensions to be checked) * Pack finished products as instructed * Complete all needed documentation and tagging for each tub of materials. * Perform routine preventative maintenance on your machines. (Adding oils and fluids as needed, cleaning, and changing bits) * Keep a safety first mindset by following all safety rules and operating in a safe manner. * Keep work area in a clean and orderly condition. * Perform other related duties as assigned TECHNICAL SKILLS: * Ability to interpret specifications and drawings, and blueprints * Knowledge of the Metric System (Microns, Millimeters, etc) * Able to use gauges to measure parts and ensure they stay within the acceptable tolerances * Basic math skills (addition and subtraction of decimal numbers) * Able to troubleshoot issues in a timely manner and know when to ask for help * Ability to work in a team environment. Required Skills and Education EDUCATION / WORK EXPERIENCE: * Experience as a Machinist (Preferred) CNC Machining Experience (Preferred About AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Headquartered in Detroit with over 80 facilities in 18 countries, we are Bringing the Future Faster for a safer and more sustainable tomorrow. To learn more, visit AAM.com. Why Join #TeamAAM: As a member of #TeamAAM, you'll get to make a difference on day one. From your first day with us, you'll have the opportunity to grow, embrace challenges, build your skills, and bring your authentic self to work every day, all while helping to shape the future of mobility for AAM…and the world. AAM will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. AAM will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e-mail *************************. AAM is an equal opportunity/affirmative action employer.

Production re-work/Fan repair We are seeking a skilled Production re-work/Fan repair technician to join our team. In this hands-on role, you will be responsible for performing rework and repairs on a variety of fans and electrical equipment, utilizing your expertise in welding, electrical assembly, and the use of hand/power tools. Key Responsibilities - Assemble and disassemble fans, following detailed instructions and schematics - Utilize a range of hand and power tools to perform maintenance and repair tasks - Maintain accurate records and documentation of all work performed - Demonstrate computer literacy to input data and access relevant information Qualifications - Previous experience in a production or manufacturing environment, with a focus on electrical assembly and repair - Proficiency in welding, particularly MIG welding techniques- - Skilled in the use of hand and power tools - Ability to read and interpret technical schematics and instructions - Strong attention to detail and problem-solving skills - Computer literacy- will be running a computerized fan balancer Working Conditions This position is based in a manufacturing facility, where you will be required to work on your feet for extended periods and potentially lift or handle heavy materials. The work schedule may involve shifts, including weekends and holidays, to ensure the timely completion of production and repair tasks. Compensation and Benefits $20 and up per hour, plus a comprehensive benefits package including health insurance, retirement contributions, and paid time off. Equal Opportunity Employer Our company is an equal opportunity employer, committed to creating a diverse and inclusive work environment. #Auburn

Machine Operators will produce production parts to print on state-of-the-art CNC Machines for the Defense, Mining, Construction and Power Generation Industries. Requirements include related CNC machining experience on horizontal and vertical boring mills; some of ours have up to 60 feet of travel. Previous experience running machine tools and/or related Vo-Tech/Schooling educational background is required. Basic math skills and working knowledge of blueprints is a must. Overhead crane experience is a major plus as we handle components up to 100,000 pounds. First and Second ($1.00 night premium) shift openings.

Job DescriptionYour weekend, engineered for precision Picture this: It's Friday at 6:00 AM. You power up a Hanwha Swiss lathe, review the traveler and blueprint, load bar stock, touch off tools, and dial in offsets. A first-article part is on your bench minutes later-checked against AQL with calipers, micrometers, and a Keyence. You deburr critical edges, verify dimensions on the optical comparator and Micro-Vu, and sign off the setup in our Visual Labor Entry system so production can flow. Before lunch, you jump into a new implant NPI-debugging a program, streamlining a setup with fixtures and jigs, and clearing a production gap to keep delivery on track. By Sunday evening, you've kept quality tight, counts accurate, and your team moving forward. What you'll own Set up, operate, and maintain CNC Swiss-style lathes (including 20's, 32's, 38's, NTY3's; Hanwha and Hardinge) to manufacture medical instruments and implants. Run production to established procedures and work instructions; complete deburring and finishing as required. Read and interpret blueprints, setup sheets, inspection check-sheets, and work operation sheets. Use precision metrology tools-calipers, micrometers, height gauges, depth micrometers, height stands, optical comparator, Micro-Vu, Keyence, and vici measuring tools-to verify parts per AQL and documentation. Troubleshoot dimensional issues, make tool changes and machine adjustments, and approve setups completed by other operators. Maintain precise counts of good and scrapped parts; complete production paperwork and enter data into the company database via Visual Labor Entry while monitoring work orders. Support new product introductions (NPI) through program debugging and setup optimization to maintain on-time delivery and quality targets. Comply with all policies and procedures and perform all other duties as assigned. Schedule and incentives Friday - Sunday, 6:00 AM - 6:00 PM 15% shift premium Work 36 hours; get paid for 40 hours What you bring Hands-on experience with CNC Swiss/lathe equipment and controls. Fluency with blueprint reading and shop documentation. Comfort with computers and manufacturing software; quick to learn new systems. Proficiency with precision measurement tools noted above. Self-starter mindset in a fast-paced, team-driven environment; strong communication across shifts and operators. Organized, quality-first approach and a desire to be “Best in Class.” Willingness to lead by example and learn NGI processes and procedures. How you'll grow You won't feel stuck-there's room to cross-train, expand skills, and advance. No two days are the same-expect variety across parts and processes. Be known-work within a tight-knit team that has each other's backs. Who thrives here Curious makers who love solving dimensional puzzles. Reliable teammates who show up and deliver when it counts. Planners who can coordinate tasks across people and processes. Clear communicators-written and verbal-who keep work flowing. Benefits and support Competitive pay and comprehensive medical, dental, and vision coverage Paid vacation and 10 paid holidays per year Employer-funded Basic Life and AD&D, STD, and LTD Tuition reimbursement 401(k) with company match Generous employee referral bonus Thriving, performance-based culture that promotes from within Temperature-controlled environment Community involvement and giving back Additional resources such as travel assistance and EAP

Full-time Description Classification: Non-Exempt Salary Grade/Level/Family/Range: Hourly Reports to: Production Supervisor CNC Machine Operator Who We Are: Flexible Concepts, Inc has produced high-quality precision machined components since 1990 for multiple industries, most notably the automotive and commercial sectors in addition to the U.S. Department of Defense. What began as a small family-owned business remains today as a much larger family-operated organization as an ISO 9001:2015 Certified entity focused on quality, continuous improvement, and flexibility to better serve our customers. Why We are Different: At Flexible Concepts, Inc, we are committed to delivering high-quality parts and services to our customers to grow our business, while caring for our employees as members of our family. What You will Get: 1. A personal, family-oriented culture. 2. Comprehensive benefit offerings including medical, dental, vision, 401k with employer match, paid vacation and holidays, and a health savings plan. 3. Fair and competitive compensation. Summary/Objective: The CNC Machine Operator runs computer numerical control machines to fabricate parts. The CNC Machine Operator loads parts in the machine, cycles the machine and detects malfunctions in machine operations, such as worn or damaged cutting tools. The operator runs production orders, communicates with co-workers regarding production runs, and maintains a safe, organized, and clean work environment while adhering to our quality standards. Working Conditions: Primarily working indoors in a manufacturing environment. May stand for 8 or more hours at a time. Prolonged exposure to noise, machinery, forklifts, metal shavings, and slick floors. Repetitive use of hands. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 1. Performs all assigned machine shop operations. 2. Detects and reports defective materials or questionable conditions to management or designee. 3. Maintains the work area and equipment in a clean, orderly condition in accordance with shift hand-off procedures and follows prescribed safety procedures. 4. Regularly performs milling, turning, drilling, tapping, de-burring, sawing, and sanding tasks. 5. Performs quality inspection of machined products, and documents results according to quality standards. 6. Completes and maintains quality paperwork for parts. 7. Assists in other work areas to perform fabrication, lay-out of parts, filtration of coolant and burnishing tasks. 8. Follow all company rules, continuous improvement initiatives, quality standards and safety policies (OSHA). 9. Ensure production schedule completion. Competencies: 1. Communication Proficiency. 2. Mathematical Skills. 3. Mechanical Capacity. 4. Technical Capacity. 5. Time Management. Supervisory Responsibility: This role does not have any supervisory responsibility upon hiring. Physical Demands: The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. While performing the duties of this job, the team member is regularly required to talk and hear. The team member is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The position requires frequent lifting, pushing and pulling objects that are 25 pounds. The team member may frequently be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud. Position Type/Expected Hours of Work: This is a full-time hourly position, and hours/days of work are decided by production schedules and the direct supervisor. Travel: No travel is required for this position. Required Education and Experience: 1. Ability to read tape measure, micrometers, calipers, and gauges. 2. Ability to speak, hear, read, and be trained in the English language. 3. Ability to perform basic math with decimals. Preferred Education and Experience: 1. One or more years of related experience highly preferred. 2. Certified/technical training. 3. Experience with equipment used at this facility. a. Okuma lathes b. Fuji lathes c. Muratec lathes d. Okuma & Fanuc controls e. Gantry & Fanuc robots Work Authorization/Security Clearance: Must be able to pass E-Verify. AAP/EEO Statement: Flexible Concepts, Inc provides equal employment opportunity to all team members and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, ancestry, age, genetic information, disability, citizen status, veteran status, military service, marital status, or any other legally protected category as established by federal, state, or local law. This policy governs all employment decisions, including recruitment, hiring, job assignment, compensation, training, promotion, discipline, transfer, leave-of-absence, access to benefits, layoff, recall, termination, and other personnel matters. All employment and personnel-related decisions are based solely upon legitimate, job-related factors, such as skill, ability, past performance, and length of service with Flexible Concepts, Inc. Flexible Concepts, Inc's strong commitment to equal employment opportunity requires a commitment by each individual team member. Compliance with the letter and spirit of this policy is required of all team members. Violations of this policy should be immediately reported to your leader or to any member of leadership. Team members who violate this policy will be subject to disciplinary action, up to and including termination of employment. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the Team Member for this job. Duties, responsibilities, and activities may change at any time with or without notice. Requirements Required Education and Experience: 1. Ability to read tape measure, micrometers, calipers, and gauges. 2. Ability to speak, hear, read, and be trained in the English language. 3. Ability to perform basic math with decimals. Preferred Education and Experience: 1. One or more years of related experience highly preferred. 2. Certified/technical training. 3. Experience with equipment used at this facility. a. Okuma lathes b. Fuji lathes c. Muratec lathes d. Okuma & Fanuc controls e. Gantry & Fanuc robots Salary Description $17.50 - $24.00 per hour

We're committed to hiring only those individuals who pride themselves on setting quality standards for the industry. We provide steady work, competitive wages, safer working conditions and good long term opportunities to train and increase their earnings. All our employees must display professionalism through: Unwavering Reliability and Punctuality Good Appearance and Attitudes Highly Productive Work Ethics Emphasis on Safety / Commitment to be Drug Free Job Description The CNC machinist operates computer numerical control machines to fabricate parts. The CNC machinist loads parts in the machine, cycles machine and detects malfunctions in machine operations, such as worn or damaged cutting tools. The position runs production lots, communicates with co-workers regarding productions runs, and maintains a safe, organized and clean work environment. - See more at: http://www.shrm.org/templatestools/samples/jobdescriptions/pages/cms_017697.aspx#sthash.uYXN5eeb.dpuf Qualifications Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs all assigned machine shop operations. Detects and reports defective materials or questionable conditions to management or designee. Maintains the work area and equipment in a clean, orderly condition and follows prescribed safety procedures. Performs inspection of machined products, and documents results. Completes and maintains paperwork for parts. Operate various CNC machines Additional Information 1st Shift 7am-3:30pm Monday-Friday, OT as needed Starting Pay is $10-14 (depending on experience)

Job Title: CNC Operators - 2nd and 3rd Shifts, Albion and Avilla locations The CNC Operator is responsible for operating and maintaining CNC machinery. This role ensures product quality through visual inspections and measurement checks, maintains accurate production documentation, and adheres to safety, engineering, and 5S standards. The goal is to produce high quality parts to customer specifications. Responsibility: * Follow Procedures & Work Instructions: Adhere to all safety, quality, and engineering procedures. * Prepare and Operate CNC Machines: Machines perform tasks such as drilling, grinding, milling, etc. * Load and Unload Materials: Handle raw materials and parts on the machines. * Inspect Finished Products: Visually inspect and use hand gauges to measure parts and compare against requirements to ensure parts meet specifications. * Complete Production Documentation: Record daily production data such as scrap and efficiency. * Conduct SPC Checks: If required, perform SPC checks as per Control Plan and Work Instructions. * Maintain 5S Standards: Follow 5S guidelines to keep the work area clean, organized, and safe. * Daily Machinery Maintenance: Conduct daily checks and preventative maintenance to ensure functionality. * Other Duties: Perform additional tasks as assigned. Academic/Educational Requirements: * High school diploma or equivalent Required Skills/Experience: * Mechanical inclination and basic knowledge of manufacturing * Prior experience as a CNC machine operator is strongly preferred, but not required. What Linamar Has to Offer: * Competitive Compensation * Employee Benefits package includes but not limited to, Drug, Dental & Vision etc. * 401k Program * Opportunities for career advancement. * Sustainability Council * Community based outreach supporting both local and global initiatives and charities. * Discounts for local vendors and events, including auto supplier discounts. About Us: Linamar Corporation is a Canadian-founded global manufacturer, renowned for its advanced engineering and innovative product development across diverse industries and markets. Our journey started in 1966 under the visionary leadership of our founder, and today, we remain committed to cultivating a culture of innovation and collaboration. With access to state-of-the-art tools and resources, you'll have the opportunity to make a meaningful impact alongside a team of driven and passionate professionals. Join us and be part of a company where innovation, collaboration, and growth are at the heart of everything we do. Linamar Corporation is an equal opportunity employer and encourages diversity in the workplace without regard to any basis protected by applicable federal, state, or local law. Linamar Corporation encourages applications from all qualified individuals and will reasonably accommodate applicants throughout all stages of the recruitment and selection process upon request. INDHIND1

Full-time Description Are you ready to work at a place that values your knowledge, experience, and expertise in machining? A family-owned business that values people who are problem solvers who are thorough and complete? BCI has a proud history, over 85 years, of providing state of the art manufacturing solutions to many industries, including agriculture, automotive, and defense. Our people and our culture are our greatest assets, and we need to add a CNC Lathe Machinist who can take our team to the next level. As a CNC Lathe Machinist at BCI Solutions, you will play a crucial role in our manufacturing process. You will be responsible for setting up, operating, and maintaining CNC lathes to produce high-precision parts and components. Your expertise will ensure that our products meet the highest standards of quality and performance. Responsibilities: Set up and operate CNC lathes to perform precision machining tasks. Read and interpret blueprints, technical drawings, and specifications. Load and unload materials, tools, and fixtures as required. Monitor machine operations to ensure proper functioning and quality output. Make necessary adjustments to machine settings to achieve desired tolerances. Conduct routine maintenance and minor repairs on CNC lathes. Inspect finished products to ensure they meet quality standards. Maintain a clean and organized work area. Follow all safety protocols and procedures. Pay will be offered based on skills and experience. Why Join Us? Competitive Salary: Attractive compensation package commensurate with experience. Benefits: Comprehensive benefits including health insurance, retirement plans, and paid time off. Career Growth: Opportunities for professional development and career advancement within a growing company. Innovative Environment: Work with cutting-edge technology and contribute to exciting projects. If you are a highly skilled CNC machinist with a passion for leadership and a drive for excellence, we would love to hear from you. Apply today to become a part of our dynamic team at BCI Solutions BCI offers: Earn paid time off from day 1 Medical, dental, and vision Insurance On-site no/ low- cost medical clinic (If participating in BCI health insurance plan) No/ low- cost out-patient surgery center (If participating in BCI health insurance plan) Life Insurance Paid holidays 401K with company match Requirements Qualifications: High school diploma or equivalent; technical certification in CNC machining is a plus. Proven experience as a CNC Lathe Operator or similar role. Proficient in reading and interpreting technical drawings and blueprints. Strong knowledge of CNC lathe operations and machining techniques. Familiarity with various measuring tools and instruments. Excellent attention to detail and problem-solving skills. Ability to work independently and as part of a team. Strong commitment to safety and quality standards. Physical Requirements: Active and moving all day Using hands/fingers, reaching, stooping, bending, or crouching may be required Lifting (1-75 lbs. with aid)

Job Description Do you have experience operating CNC or saw machines? Do you want to be part of the largest privately owned cabinet manufacturer in the US? If so, you should check out our CNC or Saw Operator position! We offer great work and great pay, and we're conveniently located in Culver, IN. Starting pay rate is $18.25-$22/hour Weekly paychecks! On-the-spot job offers Minimum Qualifications and Experience: Ability to read a tape measure and use it effectively. Must have good computer skills. Must have good team work and communication skills. Prior experience on like machine is preferred. Here is what we have to offer you: 401(k) with company match to help towards your RETIREMENT savings Health, Dental and Vision benefits Wellness Programs, Resources and Tools Health Savings and Flexible Spending Accounts Company Paid Basic Life and AD&D Insurance Coverage Company Paid Short-Term Disability Cabinet product discounts Opportunities to work overtime Our plant is located at 515 W Mill St - Culver, IN 46511. All team members will be expected to be active members of the department including participating in safety programs, attending daily meetings with the leads, taking direction from supervisors & leads, and being flexible to move within the department and plant as required by production demands. Participation is required with company programs including those that support safety, quality, and production standards. Cabinetworks Group is an equal opportunity employer. Shift Third shift Full or Part Time Full time Cabinetworks Group (the “Company”) is an equal opportunity employer. ShiftFull or Part TimeFull time Cabinetworks Group (the “Company”) is an equal opportunity employer and we want to have the best available persons in every job. The Company makes employment decisions only based on merit. It is the Company's policy to prohibit discrimination in any employment opportunity (including but not limited to recruitment, employment, promotion, salary increases, benefits, termination and all other terms and conditions of employment) based on race, color, sex, sexual orientation, gender, gender identity, gender expression, genetic information, pregnancy, religious creed, national origin, ancestry, age, physical/mental disability, medical condition, marital/domestic partner status, military and veteran status, height, weight or any other such characteristic protected by federal, state or local law. The Company is committed to complying with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in the operations of the Company regardless of where the employee is located and prohibits unlawful discrimination by any employee of the Company. Cabinetworks Group is an E-Verify employer. E-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that allows participating employers to electronically verify the employment eligibility of their newly hired employees in the United States. Please click on the following links for more information. E-Verify Participation Poster: English & Spanish E-verify Right to Work Poster: English, Spanish