Grinder cell operator job description
Updated March 14, 2024
6 min read
Find better candidates in less time
Post a job on Zippia and take the best from over 7 million monthly job seekers.
Example grinder cell operator requirements on a job description
Grinder cell operator requirements can be divided into technical requirements and required soft skills. The lists below show the most common requirements included in grinder cell operator job postings.
Sample grinder cell operator requirements
- High school diploma or equivalent.
- Previous experience in grinding and milling.
- Knowledge of quality control protocols.
- Ability to use measuring devices.
- Familiarity with safety regulations.
Sample required grinder cell operator soft skills
- Strong attention to detail.
- Excellent communication skills.
- Ability to work independently.
- Ability to work in a team environment.
- Problem-solving skills.
Grinder cell operator job description example 1
Stanley Black & Decker grinder cell operator job description
**92637BR**
**Title:**
Machine Operator Carbide Grind Cell Operator 12 hr PM shift
**Business:**
GTS - HTAS
**State/Country/Province:**
Massachusetts
**No. of Positions:**
1
**Job Description:**
**General Responsibilities:**
Set up and operate multiple machines and equipment including welders and grinders to produce a variety of Carbide Tipped Saw products following established practices and procedures.
**Responsibilities:**
+ Operation requires various adjustments to guides, vise and payoff including singular and multiple grinding head units. Set ups are exacting requiring setting and aligning grinding wheels to achieve proper rake angles, chamfer, height, etc. Set and adjust indexing cams, roller drives, guides; change wheels, belts; oil, grease and lube equipment as required. Check and maintain coolant system and fluid levels. Set and adjust speeds and feeds to maximize operating efficiency.
+ Operation requires use of overhead electric hoist to load coils onto and remove coils from equipment. Use hydraulic and hand truck to move materials and products about the department.
+ Monitor operation of multiple machines and assure quality of product. Make first piece and numerous ongoing inspections using optical comparator and other instruments to check profile and dimensions. Check micrometers at start of each shift and post findings.
+ Keep and maintain required records, counts, information and data. Perform some routine maintenance to machine and post maintenance checks on forms provided.
+ Detect and report defective and unsafe equipment and materials, as well as, unusual situations to supervisor. Observe and obey all safety rules, practices and procedures. Wear and employ all required safety equipment and devices. Clean and maintain equipment in a neat and orderly manner..
**Climate:**
Demanding, fast-paced position resulting from deadline pressures, simultaneous competing demands and changing priorities.
**Requirements:**
+ Knowledge of charts, specifications, and micrometers
+ 1-2 years' experience preferred
+ Use of numbers including decimals
+ Light physical effort required, equivalent to lifting, pushing, pulling 5 to 25 pounds
+ High School Diploma or GED Equivalent
**Hours:** Tue-Sat 5pm-5am
92637BR
**Function:**
Manufacturing
**City:**
East Longmeadow
**FLSA (For US Only):**
Hourly
**Region:**
USA
**EEO Statement:**
All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status or any other protected characteristic.
**Featured Category on SBD Careers:**
Manufacturing
**Title:**
Machine Operator Carbide Grind Cell Operator 12 hr PM shift
**Business:**
GTS - HTAS
**State/Country/Province:**
Massachusetts
**No. of Positions:**
1
**Job Description:**
**General Responsibilities:**
Set up and operate multiple machines and equipment including welders and grinders to produce a variety of Carbide Tipped Saw products following established practices and procedures.
**Responsibilities:**
+ Operation requires various adjustments to guides, vise and payoff including singular and multiple grinding head units. Set ups are exacting requiring setting and aligning grinding wheels to achieve proper rake angles, chamfer, height, etc. Set and adjust indexing cams, roller drives, guides; change wheels, belts; oil, grease and lube equipment as required. Check and maintain coolant system and fluid levels. Set and adjust speeds and feeds to maximize operating efficiency.
+ Operation requires use of overhead electric hoist to load coils onto and remove coils from equipment. Use hydraulic and hand truck to move materials and products about the department.
+ Monitor operation of multiple machines and assure quality of product. Make first piece and numerous ongoing inspections using optical comparator and other instruments to check profile and dimensions. Check micrometers at start of each shift and post findings.
+ Keep and maintain required records, counts, information and data. Perform some routine maintenance to machine and post maintenance checks on forms provided.
+ Detect and report defective and unsafe equipment and materials, as well as, unusual situations to supervisor. Observe and obey all safety rules, practices and procedures. Wear and employ all required safety equipment and devices. Clean and maintain equipment in a neat and orderly manner..
**Climate:**
Demanding, fast-paced position resulting from deadline pressures, simultaneous competing demands and changing priorities.
**Requirements:**
+ Knowledge of charts, specifications, and micrometers
+ 1-2 years' experience preferred
+ Use of numbers including decimals
+ Light physical effort required, equivalent to lifting, pushing, pulling 5 to 25 pounds
+ High School Diploma or GED Equivalent
**Hours:** Tue-Sat 5pm-5am
92637BR
**Function:**
Manufacturing
**City:**
East Longmeadow
**FLSA (For US Only):**
Hourly
**Region:**
USA
**EEO Statement:**
All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status or any other protected characteristic.
**Featured Category on SBD Careers:**
Manufacturing
Post a job for free, promote it for a fee
Grinder cell operator job description example 2
Precision Castparts grinder cell operator job description
Country
United States of America
State / County
Oregon
City
Portland
Division
Structurals
Company
LPC
Function
Operations
Workplace Type
On-Site
Position type
Full Time
Opportunity ID
6572
Company Profile
This requisition was created on 10/13/2022.
EXCELLENT BENEFITS!
* Quarterly bonuses
* Full benefits that start on the 1st of the month following your hire date
* 401K
* Paid holidays, vacations, and sick leave
* Tuition reimbursement
* Gym membership reimbursement for you and your family
* Safety shoe and safety glasses reimbursement
* And so much more!
With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.
Job Description
MISSION:
To remove surface and subsurface defects from castings in order to meet customer specifications.
PRINCIPAL ACCOUNTABILITIES:
1- Grinding.
Objective: to review inspection paperwork, and grind and blend defect areas on castings; to blend welds to blueprint tolerances.
Typical Activities:
* Reviews x-ray/inspection paperwork, sketches and blueprints to determine grinding requirements.
* Removes surface and blind cavity defects from castings using rotary files, burrs, abrasives or belts to prepare castings for repair.
* Blends and reworks repaired areas to specified tolerances; may use hand-held sandblaster.
2- Inspection.
Objective: to assure compliance with customer specifications.
Typical Activities:
* Verifies dimensional compliance using micrometers, calipers, ultrasonic testing and similar types of dimensional inspection devices.
* Performs fluorescent penetrant inspection tests on parts to verify removal of surface and subsurface defects; applies penetrant, lets dry, washes off and inspects for defects.
* Completes logs and records.
* Provides work direction and training to junior-level grinders as assigned.
3- Safety.
Objective: to take responsibility for and demonstrate safe work practices.
Typical Activities:
* Adheres to plant and department safety rules.
* Safely operates all equipment and tools.
* Identifies and reports safety problems.
* May be required to handle hazardous waste.
4- Performs other tasks as directed.
TRAINING:
* Training is provided on the job.
* Rework Analyst, Visual Dimensional and Penetrant Inspection Courses preferred.
* May be required to complete hazardous waste management training.
ENTRY QUALIFICATIONS:
* Grinding skills and working knowledge of grinding tools, equipment, and materials.
* OR
* An equivalent combination of classroom training and work experience.
* Basic ability to follow instructions, read, write, and perform arithmetic calculations.
* Ability to use and read dimensional tools including calipers, gauges and micrometers.
* Ability to read, interpret, and follow specifications on Tech Cards and Process Control Procedures.
* Ability to lift and/or maneuver objects weighing thirty to fifty pounds and occasionally up to eighty pounds.
* Ability to work in difficult working conditions which may include exposure to noise, dust, chemicals, temperature extremes, awkward physical positions and other elements for extended periods of time.
INDIVIDUALS MAY HAVE CONTACT WITH OR BE REQUIRED TO HANDLE HAZARDOUS WASTE.
NOTE: for job positions that require respiratory protection (more than a filtering face piece - dust mask):
In compliance with the Oregon Occupational Safety and Health Division Personal Protective Equipment standard for Respiratory Protection, OAR 437, Div. 2/I 1910.134 and Oregon Health Division Rules for the Control of Radiation, OAR 333. Div. 120 (333-120-300 through 330), certain tasks within this job position require/may require the use of a NIOSH-approved respirator. An individual will not be assigned to these tasks if the person is not able to work under these conditions. Respirator selection will be based on the work performed, exposure information, duration of use and any other relevant factors. If a tight-fitting respirator is required, facial hair, temple pieces on glasses or other items that interferes with the face-to-face piece seal of the respirator are not permitted.
United States of America
State / County
Oregon
City
Portland
Division
Structurals
Company
LPC
Function
Operations
Workplace Type
On-Site
Position type
Full Time
Opportunity ID
6572
Company Profile
This requisition was created on 10/13/2022.
EXCELLENT BENEFITS!
* Quarterly bonuses
* Full benefits that start on the 1st of the month following your hire date
* 401K
* Paid holidays, vacations, and sick leave
* Tuition reimbursement
* Gym membership reimbursement for you and your family
* Safety shoe and safety glasses reimbursement
* And so much more!
With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.
Job Description
MISSION:
To remove surface and subsurface defects from castings in order to meet customer specifications.
PRINCIPAL ACCOUNTABILITIES:
1- Grinding.
Objective: to review inspection paperwork, and grind and blend defect areas on castings; to blend welds to blueprint tolerances.
Typical Activities:
* Reviews x-ray/inspection paperwork, sketches and blueprints to determine grinding requirements.
* Removes surface and blind cavity defects from castings using rotary files, burrs, abrasives or belts to prepare castings for repair.
* Blends and reworks repaired areas to specified tolerances; may use hand-held sandblaster.
2- Inspection.
Objective: to assure compliance with customer specifications.
Typical Activities:
* Verifies dimensional compliance using micrometers, calipers, ultrasonic testing and similar types of dimensional inspection devices.
* Performs fluorescent penetrant inspection tests on parts to verify removal of surface and subsurface defects; applies penetrant, lets dry, washes off and inspects for defects.
* Completes logs and records.
* Provides work direction and training to junior-level grinders as assigned.
3- Safety.
Objective: to take responsibility for and demonstrate safe work practices.
Typical Activities:
* Adheres to plant and department safety rules.
* Safely operates all equipment and tools.
* Identifies and reports safety problems.
* May be required to handle hazardous waste.
4- Performs other tasks as directed.
TRAINING:
* Training is provided on the job.
* Rework Analyst, Visual Dimensional and Penetrant Inspection Courses preferred.
* May be required to complete hazardous waste management training.
ENTRY QUALIFICATIONS:
* Grinding skills and working knowledge of grinding tools, equipment, and materials.
* OR
* An equivalent combination of classroom training and work experience.
* Basic ability to follow instructions, read, write, and perform arithmetic calculations.
* Ability to use and read dimensional tools including calipers, gauges and micrometers.
* Ability to read, interpret, and follow specifications on Tech Cards and Process Control Procedures.
* Ability to lift and/or maneuver objects weighing thirty to fifty pounds and occasionally up to eighty pounds.
* Ability to work in difficult working conditions which may include exposure to noise, dust, chemicals, temperature extremes, awkward physical positions and other elements for extended periods of time.
INDIVIDUALS MAY HAVE CONTACT WITH OR BE REQUIRED TO HANDLE HAZARDOUS WASTE.
NOTE: for job positions that require respiratory protection (more than a filtering face piece - dust mask):
In compliance with the Oregon Occupational Safety and Health Division Personal Protective Equipment standard for Respiratory Protection, OAR 437, Div. 2/I 1910.134 and Oregon Health Division Rules for the Control of Radiation, OAR 333. Div. 120 (333-120-300 through 330), certain tasks within this job position require/may require the use of a NIOSH-approved respirator. An individual will not be assigned to these tasks if the person is not able to work under these conditions. Respirator selection will be based on the work performed, exposure information, duration of use and any other relevant factors. If a tight-fitting respirator is required, facial hair, temple pieces on glasses or other items that interferes with the face-to-face piece seal of the respirator are not permitted.
Dealing with hard-to-fill positions? Let us help.
Resources for employers posting grinder cell operator jobs
Average cost of hiring
Recruitment statistics
How to write a job description
Examples of work conditions
Grinder cell operator job description FAQs
Ready to start hiring?
Updated March 14, 2024
Updated March 14, 2024