Infrastructure engineer jobs in Aliso Viejo, CA - 764 jobs

A new space race has begun. True Anomaly seeks those with the talent and ambition to build innovative technology that solves the next generation of engineering, manufacturing, and operational challenges for space security and sustainability. OUR MISSION The peaceful use of space is essential for continued prosperity on Earth-from communications and finance to navigation and logistics. True Anomaly builds innovative technology at the intersection of spacecraft, software, and AI to enhance the capabilities of the U.S., its allies, and commercial partners. We safeguard global security by ensuring space access and sustainability for all. OUR VALUES Be the offset. We create asymmetric advantages with creativity and ingenuity What would it take? We challenge assumptions to deliver ambitious results It's the people. Our team is our competitive advantage and we are better together YOUR MISSION True Anomaly is seeking a Lead System Modeling Engineer to serve as a Subject Matter Expert (SME) in Model-Based Systems Engineering (MBSE) in support of space and missile defense programs. This individual will serve as the company technical authority for Cameo-based MBSE model development and SysML best practices, contributing to the development of digital thread architecture and ecosystem operation. This role is responsible for developing, maintaining, and governing system models across complex space and missile defense programs, while influencing digital thread architecture and systems engineering processes in alignment with Department of Defense (DoD) policies and industry standards. This includes developing and managing models created organically and evaluating and integrated models provided externally from partners and the U.S. Government. This position will report to the Digital Thread Architect. Responsibilities Serve as the primary Cameo MBSE SME, providing technical leadership, mentoring, and governance for SysML-based system models Develop, maintain, and integrate MBSE artifacts supporting space systems, spacecraft, satellites, and missile defense weapon systems Perform full-spectrum Systems Engineering activities using model-based approaches, including: Requirements analysis and traceability; Functional and logical architecture development; Interface definition and system decomposition; Verification and validation modeling Implement and sustain Digital Engineering and Digital Thread concepts across engineering and all lifecycle phases Support System of Systems engineering activities and model integration Apply and tailor MBSE practices in accordance with DoDI 5000.97, DoD digital engineering guidance, industry standards, recommended practices, and internal engineering requirements Utilize the Cameo platform to create and manage a model-based, authoritative representation of system requirements, architecture, behavior, interfaces, and verification to enable traceability, trade studies, and lifecycle decision-making for complex systems Integrate MBSE models with enterprise PLM tools, including Teamcenter, Jama, NX CAD, and other data systems, to enable lifecycle data continuity Help develop, refine, and deploy systems engineering processes and MBSE workflows across programs Collaborate within Agile development environments, supporting incremental delivery and continuous integration of system models Support classified programs, ensuring compliance with security requirements and configuration management practices Contribute to proposal efforts, technical reviews, and customer engagements related to MBSE and digital engineering Utilize and participate in industry standards organizations and working groups (SAE, AIAA, IEEE, INCONSE, RAMS, etc.) to continuously assess and acquire the latest technological solutions and techniques Perform other related tasks as required Required Qualifications Bachelor of Science (B.S.) in Mechanical Engineering, Aerospace Engineering, Systems Engineering, or a closely related discipline 5+ years of direct Cameo modeling experience, with strong experience and working knowledge of SysML, MBSE, Digital Engineering, and System of Systems engineering Familiarity with MBSE best practices and real-world implementation Experience using system modeling tools such as Cameo, Rhapsody, MagicDraw, or similar platforms Developing digital twin and/or virtual twins Experience influencing or assisting with digital thread architectures Experience with systems engineering for aircraft, space systems, spacecraft, satellites, missile systems, threat systems, kill vehicles, ground stations, or missile defense systems Experience with process development and deployment in engineering environments Hands-on experience with Teamcenter for Product Lifecycle Management (PLM) Familiarity with Agile methodologies Active Secret security clearance, with the ability to obtain and maintain a Top Secret clearance Preferred Qualifications Master's degree in a related engineering or technical field More than one year of program experience working in a structured Agile environment Experience supporting Department of Defense (DoD) programs Familiar with AFSIM and/or SpaceDEN Familiar with DoDI 5000.97, DoD Style Guide for MBSE, and other DoD documents, processes, and practices related to digital engineering and MBSE Documented completion of Lockheed Martin Systems Engineering Bootcamp Training Hands-on skills in software programming (Python, C++, etc.), utilizing Artificial Intelligence, Machine Learning (AI/ML) Experience in predictive analytics, parametric, probabilistic, point estimates, and deterministic modeling Active Top Secret security clearance Key Competencies Expert-level proficiency in Cameo MBSE modeling Strong understanding of SysML semantics and best practices Ability to communicate complex technical concepts to technical and non-technical stakeholders Leadership in driving MBSE adoption and engineering transformation Strong collaboration skills across systems, software, hardware, and operations teams Attention to rigor, traceability, and compliance in regulated DoD environments Compensation Base Salary: Denver: $155,000-$215,000, Long Beach: $160,000-$225,000 Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. ADDITIONAL REQUIREMENTS Work Location - Successful candidates will be located near Denver or Colorado Springs. While we observe a hybrid work environment, some work must be done on site. Work environment - the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job. Physical demands - the physical demands of the job, including bending, sitting, lifting and driving. This position will be open until it is successfully filled. To submit your application, please follow the directions below. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. True Anomaly is committed to equal employment opportunity on any basis protected by applicable state and federal laws. If you have a disability or additional need that requires accommodation, please do not hesitate to let us. #J-18808-Ljbffr

Our client is seeking a Network Engineer to join their company for a full-time, direct hire position. The Network Engineer will design, implement, and maintain secure, high-performing nationwide network infrastructures, establishing standards, analyzing and resolving complex issues, and ensuring reliable connectivity aligned with business objectives. Location: Onsite in Santa Ana, CA Compensation: This job is expected to pay about $125,000-135,000 plus benefits What You'll Do: Designs secure network solutions that maximize the sharing of applications, information, and resources across the company. Coordinates with multiple vendors/departments to procure network-related hardware, software, and services. Investigates and resolves problems, inefficiencies, and performance issues. Evaluates, tests, recommends, and implements specific network solutions. Develops advanced/leading-edge technologies and/or concepts. Mentor junior network admin and engineer. Independently analyzes and provides innovative solutions to network engineering and design projects. Reverse engineer and develop solutions/strategy for onboarding and converting acquired companies into FBM's standard network technology stack. What Gets You the Job: Bachelor's degree in Computer Science, Information Technology, or related field or equivalent years of experience . 5+ years of relevant experience in Network Engineering role. Expert knowledge of TCP/IP and common routing protocols such as OSPF, BGP, HSRP and QoS Expert knowledge of common LAN, WAN, WLAN and SD-WAN architectures and methodologies Expert knowledge of network security including firewalls, intrusion detection and prevention, LAN segmentation and network access controls Expert knowledge of public cloud hosting network features, strong preference given towards Microsoft's Azure platform Proficient in disaster recovery environments and business continuity Experience with Cisco, Palo Alto Firewalls, Palo Alto Panorama, Palo Alto Prisma Access, Meraki, and VeloCloud SDWAN is a strong plus. Please send your resume to Hannah Xu, Senior Technical Recruiter for immediate consideration. Irvine Technology Corporation (ITC) is a leading provider of technology and staffing solutions for IT, Security, Engineering, and Interactive Design disciplines servicing startups to enterprise clients, nationally. We pride ourselves in the ability to introduce you to our intimate network of business and technology leaders - bringing you opportunity coupled with personal growth, and professional development! Join us. Let us catapult your career! Irvine Technology Corporation provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Irvine Technology Corporation complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities.

Senior Systems Engineer Gilero is a leading medical device design, development, and manufacturing partner. We specialize in creating innovative solutions that improve patient care and enhance lives. Our growing dynamic team of professionals works across disciplines to bring ideas to life, from concept to commercialization. We are seeking a highly skilled Senior Systems Engineer to lead and contribute to the development of complex medical devices and combination products. The ideal candidate will bring a systems-level perspective, integrating mechanical, electrical, and software components while ensuring compliance with regulatory and quality standards. You will be responsible for leading systems engineering project activities for medical device and drug delivery applications. This role is pivotal in bridging engineering disciplines to deliver safe, effective, and innovative healthcare solutions. Join us in a collaborative and innovative environment where your contributions will make a real difference. You'll work with multiple clients across a variety of cutting-edge products to help shape the future of healthcare technology, ensuring products meet the highest standards and positively impact patient outcomes across the globe. Responsibilities: Acts as technical lead throughout the full product development lifecycle from initial concept to release to market of new medical devices; primarily class I and class II electro-mechanical devices. Provides expertise in various Systems Engineering principles including user and stakeholder need definition; requirements definition; risk management, product architecture, configuration management, traceability, change management, and reliability. Plans systems engineering projects by identifying appropriate system development lifecycles. Develops product development strategies for large or complex systems integrations. Generates system architecture definitions, integrations, development viewpoints, and models. Manages the system architecture and relates it to the design throughout the lifecycle. Defines requirements hierarchy and how it relates to verification and validation planning. Performs functional system decompositions to solve complex design challenges. Prepares detailed component and assembly drawings. Leads and participates in writing product and customer requirements, design and phase reviews, product and process risk assessments, root cause investigations, and corrective action planning. Plans, authors, and executes test methods and protocols for design verification and validation. Analyzes test data, interprets results, and formulates conclusions. Maintains the Design History File (DHF) and ensures documents are complete, accurate, current, and compliant with regulations. Contributes to developing systems engineering tools and processes and trains others to use those systems. Identifies technical opportunities and generates work for themselves within their assigned project teams. Defines objectives, participates in, and oversees the quality of output for large or complex projects. Contributes to solving open-ended problems and tasks with a high level of decision-making. Formulates and develops detailed project deliverables with some management oversight. Communicates technical risks and proposed solutions clearly and directly with the customer. Sources and interfaces with third-party vendors. Acts as subject matter expert (SME) lead in one or more areas and is aware of industry trends. Supports business development efforts as a SME to potential customers and providing input on engineering estimations. Establishes a proven track record of building trust and rapport with new clients. Acts as mentor demonstrating strong leadership skills. Participates in recruitment activities including interview panels. Travel will be required, as necessary (typically less than 5%). Skills/Qualifications: BS in Engineering or equivalent technical degree. Work onsite in the Carlsbad, CA office four days per week. 5+ years relevant experience. Experience developing electro-mechanical medical devices. Proven ability to lead a product development program from concept to market release. Working knowledge of system modeling tools and methodologies (e.g., UML, SysML). Working knowledge of working in both agile and waterfall methodologies. Proficiency with SolidWorks or other 3D CAD (Computer Aided Design) modeling software. Working knowledge of requirements management software (e.g., Jama, Polarion, Doors). Working knowledge of developing products for compliance with IEC 60601 for electrical safety and for software development. Working knowledge of developing products for compliance with FDA 21 CFR Part 820.30, 21. CFR Part 4, ISO14971, ISO 13485 and EU MD. Personal Attributes: Meets Gilero Core Values: Collaboration, Innovation, Excellence, Integrity. Productive in a fast-paced, entrepreneurial environment. Commits to excellence and quality service to external and internal customers. Adheres to established policies and procedures, while contributing to continuous improvements. Eligibility To Work: Applicants must be permanently authorized to work in the United States without the need for employer sponsorship now or in the future. Gilero does not offer sponsorship for employment authorizations (work visas). We are an E-Verify employer and confirm work authorization for all new hires. Why work at Gilero: Founded in 2002, Gilero, a Sanner Group company, is an international contract engineering firm that specializes in the design, development, and manufacturing of novel medical devices and drug delivery products. At Gilero we are proud of the culture we have built that directly reflects our values of excellence, integrity, innovation, and collaboration. Motivated by our purpose to benefit people and improve patient outcomes, our team continues to grow at a rapid pace. US locations include Carlsbad, CA; Chicago, IL; as well as NC locations in Raleigh, Durham, Greensboro, and Pittsboro. You will enjoy an annual bonus plan, Medical (3 BCBS plans to choose from), Guardian dental and vision, company provided life insurance, short-term and long-term disability, 401(k) with a match the first month you start with a zero-vesting period, and access to LinkedIn learning for personal and professional development.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: Top SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At the heart of Defining Possible is our commitment to missions. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We're looking for innovators, who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we will support yours of expanding your personal network and developing skills, whether you are new to the field or an industry thought-leader. At Northrop Grumman, you will have the resources, support, and team to do some of the best work of your career. Northrop Grumman is seeking a well-qualified Windows Systems Administrator to join its dynamic team of technical professionals in Redondo Beach, CA. The selected candidate will be required to work on-site, full-time at our Redondo Beach, CA campus. Roles and responsibilities will include but not be limited to the following: Perform as primary Windows Systems Administrator for a large, classified government contract. Communicate effectively at all levels of the organization with internal and external customers, in written and verbal format. Maintain efficient operations of IT infrastructure including virtual servers and desktop, and on occasion networking equipment. Support multiple networks and ensure necessary IT administration tasks are completed independently and within a group as necessary. Support internal and external customer requirements and recommend equipment and software requirements for solutions to problems by means of automated systems. Recommend and implement system enhancements that will improve the performance and reliability of the system including installing, upgrading/patching, monitoring, problem resolution, and configuration management. Provide backup and recovery services; manage file systems and disk space; and manage virus protection on a routine basis as directed by policy. Create and maintain user and computer accounts and modify file permissions as directed by policy. Test new releases of products to ensure compatibility and minimize user and impact. Develop and maintain technical processes and procedures as needed. Maintain security audit and logging information on all classified networked and standalone computers as directed by the Cyber Security team Report project status as required for all recurring and non-recurring efforts. Basic Qualifications: Must have an Associate's degree with 4 years of relevant experience, or a Bachelor's degree with 2 years of experience, a High School diploma or equivalent with 6 years of IT experience may be considered in lieu of a completed degree. At least 1 year of experience maintaining Classified Windows Domains in effective operations to include working knowledge of Active Directory (AD) maintenance and support, Group Policy (GPO), Windows Server Update Servers (WSUS), Microsoft Exchange, SCCM or similar update service, and experience working with vulnerability scanning tools. Knowledge of VMWare implementation, migration, and maintenance. Knowledge of Implementing and maintaining Virtual Desktop Infrastructure (VDI) services and platform Must have a DOD 8570 IAT Level II, or higher, certification (example: Security+ CE); maintaining the required certification will be a condition of continued employment Candidates must have a current DOD Top Secret level security clearance (at a minimum), to include a closed investigation date completed within the last 6 years in order to be considered Must have the ability to obtain a Special Access Programs (SAP/SAR) clearance as a condition or employment and/or customer requirements; maintaining a SAP clearance will be a condition of continued employment. Preferred Qualifications: Knowledge of DHCP, scopes, DNS management, Certificate Authority (CA) server. Preferred consideration given to candidates with Sentris data tagging. Supporting golden image deployment and underlying infrastructure. Knowledge of NetApp and/or Nutanix implementation, migration, and maintenance. Experience with system design and architecture. Experience with PowerShell/Python scripting and automation tools. Knowledge of Cohesity or similar Backup Appliances Knowledge of RedHat Enterprise Linux/Ansible implementation, migration and maintenance. Knowledge of RedHat Enterprise Linux/Ansible (7,8 or 9) deploying, upgrading, patching, backups . We offer flexible work arrangements, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. Our Employee Resource Groups (ERGs) offer opportunities to be a friend, be active, be a volunteer, be a leader, be recognized, and to be yourself. At Northrop Grumman, we are on the cutting edge of innovation. Our diverse portfolio of programs means there are endless paths to cultivate your career. We also offer exceptional benefits/healthcare, a 9/80 work schedule, and a great 401k matching program. Come join us! Primary Level Salary Range: $83,400.00 - $125,200.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Hi , Hope your are doing good. I have a job opportunity related to your profile with one of our client, please find below Job Description for your review. If you are interested and available please send your updated resume along with your contact details to discuss further. Role: Windows Admin MS intune, SCCM Duration: Full TIme Location: Torrance, CA Primary Skills : In-depth knowledge on Windows admin ( 7/8/10), MS intune, AS, SCCM, AD, Outlook ( 2010/13/16 ) O365 and VPN MS Intune , AD , MDT , Dell Hardware , SCCM ( 6 to 10 Yrs. exp. ) · 4 to 6 years of IT infrastructure function · In-depth knowledge on · Working knowledge on Citrix, VMWare and Azure · Hands-on Build Windows 7 Images on laptops and Desktops · Implementation experience on Intune in Azure cloud · Implement Packaging, Deployment Infrastructure, Depot Services · Domain Migration for Laptops and Desktops · One Drive migration to cloud · Microsoft Office migration from 2010/2013 to 2016 · Technical knowledge and experience in management of large enterprise customers end user computing · Configuring Hardware, applications, Network connectivity, User Access, mobile computing · Monitoring and maintain systems · Coordinate with vendor for the hardware support for laptops · Experience on Service now and ITIL processes Essential duties for the position include, but are not limited to the following: · Provide onsite support to Authorized Users with operational and technical support and to meet specified SLAs · Resolve incidents and problems associated with EUC equipment · Perform reactive troubleshooting to effectively identify potential incidents or problems, and attempt to eliminate them to occur in the future · Support Authorized Uses connecting or attempting to connect to corporate network and assist in the coordination and completion of accessing LAN, print, and file services; connection to WAN; and accessing appropriate LAN segments · Provide repair and maintenance for mobile devices · Install, upgrade and repair EUC equipment (desktops, laptops, monitors, and associated peripherals) · Provide software break/fix services and replacement of non-warranty assets for end users · Provide network printers and scanner network connectivity, including providing network support for device configuration, for IP addressing, and direct TCP/IP output · Provide warranty and break/fix support for networked printers and scanners · Configure and support end users on mobile computing platforms · Provide VIP support for equipment including desktop devices, mobile devices, display screens, video systems, docking stations, communication devices, direct attached printers, local printers, scanners, wireless networking, etc · Create, change and remove printer configurations and queues based on requests and in accordance with SLAs · Provide on-site hardware support for general troubleshooting and problems for end user computing technologies · Provide regular, accurate, and timely feedback regarding customer requirements which shall include supervising assignments and maintaining timely communication with sales, operations, and branch office personnel. · Utilize problem management database and systems to track and report on customer calls and requests. · Communicate technical information to technical and non-technical team and customers. · Desk side support services as required Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

*CA candidates only* Mainly remote, required to go on-site few times a year. Healthcare company is looking to bring on a Windows System Admin. This role is full time. Role: Develop, install, administer, maintain, and upgrade Windows-based infrastructure within a corporate environment. Configure internal systems. Troubleshoot C# applications. Requirements: 5+ years of Windows Sys Admin Experience Experience with Active Directory and Office 365 Must be able to read C#/.NET code Benefits: Health, dental, and vision insurance Competitive PTO, sick time, company-observed holidays and a floating holiday Paid parental leave Education reimbursement program Outstanding opportunities for personal growth and career development U.S. Citizens and those authorized to work in the U.S. are encouraged to apply. We are unable to sponsor at this time.

At Vast, our mission is to contribute to a future where billions of people are living and thriving in space. We are building artificial gravity space stations, allowing long-term stays in space without the adverse effects of zero-gravity. Our initial crewed space habitat will be Haven-1, scheduled to be the world's first commercial space station when it launches into low-Earth orbit in 2026. It is part of our stepping stone approach to continuous human presence in LEO. Our team is all-in, committed to executing our mission safely and on time. If you want to work with the most talented people on Earth furthering space exploration for humanity, come join us. Vast is looking for a GNC Simulation Infrastructure Engineer, reporting to the Senior Director, Flight Dynamics and GNC, to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations. This will be a full-time, exempt position located in our Long Beach location. Responsibilities: Develop and maintain cloud storage and computing solutions for GNC simulations and analysis data. Develop and maintain custom front-ends for presenting relevant GNC data. Develop and maintain custom CI/CD pipelines for GNC software. Manage and maintain large data sets generated by Monte-Carlo simulations. Minimum Qualifications: Bachelor of Science degree in Computer Science, Software Engineering, Information Technology, Information Science, or other engineering discipline. 2+ years of industry experience with cloud computing, storage, and containerized handling of engineering applications. 2+ years of industry experience with front-end web development for interactive analysis of engineering data. Preferred Skills & Experience: Experience with executing and processing data from Monte-Carlo simulations. Experience with front-end web development for 3D visualizations. Knowledge of computer applications and the ability to easily navigate through different computer software programs. Ability to work effectively in a team environment. Ability to make independent judgments with limited information. Communication skills for relaying data (verbally and in-writing) between other employees, vendors, and customers. Logical and strategic approach to solving problems. Comfortable working in a high-stress environment balancing several projects at any given time, and the flexibility to adjust for abrupt changes in strategic direction. Additional Requirements: Willingness to work evenings and/or weekends to support critical mission milestones. Pay Range: California$110,000-$170,000 USDCOMPENSATION AND BENEFITS Base salary will vary depending on job-related knowledge, education, skills, experience, business needs, and market demand. Salary is just one component of our comprehensive compensation package. Full-time employees also receive company equity, as well as access to a full suite of compelling benefits and perks, including: 100% medical, dental, and vision coverage for employees and dependents, flexible paid time off for exempt staff and up to 10 days of vacation for non-exempt staff, paid parental leave, short and long-term disability insurance, life insurance, access to a 401(k) retirement plan, One Medical membership, ClassPass credits, personalized mental healthcare through Spring Health, and other discounts and perks. We also take pride in offering exceptional food perks, with snacks, drip coffee, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast's ongoing commitment to providing high-quality meals for employees. U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. This status includes U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Vast is an Equal Opportunity Employer; employment with Vast is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. What You Will Do: Administer and maintain operations of software applications and hardware platforms by analyzing, diagnosing, and troubleshooting technical issues. Provide timely technical assistance to users and excellent customer care. Maintain hardware and software security updates on a recurring schedule. Configure new systems including hardening security settings and testing. Active Directory Object Management (i.e. user, computer, groups). Manage NTFS and file share permissions. Identify, analyze and remediate technical challenges. Administer backups; diagnose and remediate backup errors. Partner with application/project/security/program/third party teams to plan, design, and implement new information technology hardware. Manage client agents for server management and monitoring. Create and maintain technical and process documentation. Qualifications You Must Have: Typically requires a University degree or equivalent experience and a minimum of 2 years of prior relevant experience, or an Advanced Degree in a related field. Active and transferable U.S. government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Experience deploying Windows workstation hardware, platform software, and migrating end-user data Must be able to obtain Department of Defense Directive (DoDD) 8140 / 8570 Certification (CompTIA Security+ CE or equivalent certification) within 6 months of start date Qualifications We Prefer: Experience with patch management software to apply security patches and adhere to compliance standards. Experience with operating systems, system cloning, and deployment. Microsoft Windows Active Directory Services administration and support (e.g. user and computer object administration, Group Policy). Experience with an IT incident/service request systems Experience implementing hardware and software-based enterprise encryption standards. Experience with Windows command line and related utilities. Experience with servers, tape libraries, and storage platforms. Experience building, configuring and deploying virtual servers. Automation via scripting. Experience with applications such as MatLab, Green Hills Software, DOORS, and Atlassian Suite GmbH. What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 75,800 USD - 144,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required on day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. What You Will Do: * Provide IT systems administration in a heterogeneous Microsoft Windows and RedHat Enterprise Linux environment. * Experience with Windows Server internals or Linux fundamentals to include DNS, DHCP, AD, and server replication methods. * Working as a team member in a fast-paced technological environment. Use troubleshooting techniques to resolve technical problems of moderate to high scope and complexity to include the integration of hardware and operating systems (OS). * Experience with data RAID, data backup uses and technologies. Install and configure software applications requested by end users * Work with Cybersecurity professionals to maintain security requirements. * Must be able to obtain Department of Defense Directive (DoDD) 8140 / 8570 Certification requirements (CompTIA Security+ CE or equivalent certification) within 6 months of start date. * Systems are operational 24x7 and occasionally require work effort beyond standard work hours. * Travel required as business needs dictate to other US Domestic locations, up to 10% per year. * Full time 100% Onsite position. Qualifications You Must Have: * Typically requires a University degree or equivalent experience and a minimum of 2 years of prior relevant experience, or an Advanced Degree in a related field. * Active and transferable U.S. government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. * Windows systems administration experience. Qualifications We Prefer: * Active Top Secret security clearance. * Bitlocker support. * Windows command line and related utilities. * VMWare VSphere (ESXi, vCenter, etc). * Automation vis scripting. * Experience with the following Microsoft technologies: MDT/WSUS/MECM; Windows desktops (Windows 10 & 11), Horizon. * Experience with engineering applications such as MatLab, Green Hills products, Doors, and Subversion. * CompTIA Security+ certification or other industry-recognized certifications relevant to a Windows System Administrator. * Infrastructure backup, res.tore, disaster recovery and business continuity. * Network and infrastructure services such as domain controllers, global catalogs, DNS, and DHCP. * ITIL Foundations and/or ITIL Service Operations. What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 75,800 USD - 144,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Our client is seeking a Tam Foundation Server Administrator with strong experience in TFS Administration Qualifications Heavy TFS Administration experience C# .Net SQL, SSDT (SQL Server Data Tools), SQL Server 2012, Visual Studio 2012 Managing application and code Build Release Admin experience is a plus Additional Information All your information will be kept confidential according to EEO guidelines. Contract 6 + Months Rate $60/hr Candidate needs to be EAD, Green Card and US Citizen No OPT EAD Prefers locals

The System Engineer III will be responsible for providing extensive knowledge and working expertise in Active Directory, Group Policy, PowerShell scripting, Windows and Linux server administration, virtualization, and enterprise network infrastructure. This role is responsible for all security across all layers of the OSI/TCP/IP model, as well as deep experience with Microsoft 365, certificate services, and enterprise storage systems. This role is responsible for a high level of technical proficiency, strong documentation skills, and the ability to mentor junior IT staff. This role is required and must be adaptable, able to learn new technologies, and capable of supporting complex multi-domain environments. ESSENTIAL JOB FUNCTIONS • Design, implement, and maintain enterprise network and server infrastructure across multi-site, multi-domain environments. • Administer and troubleshoot Active Directory, including forests, trusts, replication, DNS integration, and domain migrations. • Develop, manage, and troubleshoot Group Policy Objects (GPOs) to enforce security and system configuration. • Write and maintain PowerShell scripts for automation, reporting, and administrative tasks. • Administer and support Windows Server (2012-2025) and Linux systems. • Configure and manage Microsoft 365 services (Exchange Online, SharePoint, Teams, security, identity management). • Design and manage Layer 2/Layer 3 network infrastructure, including VLANs, subnetting, routing, and switching. • Configure and maintain Cisco and Ruckus switches, including creating and supporting Link Aggregation Groups (LAGs). • Manage virtualization environments including VMware vSphere, Microsoft Hyper-V, and Proxmox. • Administer enterprise storage systems (SAN/NAS), including Synology NAS. • Create and manage digital certificates and maintain internal certificate authorities (CAs) for secure communications. • Configure and support firewalls, VPNs, and SD-WAN solutions; FortiGate experience is a plus. • Utilize network monitoring tools (e.g., SNMP, What's Up Gold, PRTG) for proactive infrastructure monitoring and response. • Implement and manage security at all layers of the OSI/TCP/IP model, including physical, network, transport, and application layers. • Create and maintain comprehensive technical documentation, including standard operating procedures, manuals, and Visio diagrams. • Train and mentor junior IT staff, promoting knowledge sharing and consistent operational practices. • Participate in and lead infrastructure projects, including upgrades, migrations, and disaster recovery planning. • Stay current with new technologies and industry best practices, demonstrating the ability to quickly learn and adopt new tools and platforms. • Maintains reliable and consistent attendance, including being punctual, dependable, and flexible to potential schedule changes to meet the needs of the department and the organization. • Executes each essential duty satisfactorily to perform job successfully. • Follows all safety procedures required in work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. • Performs effectively as a team member, able to work well with others, open to receive and give feedback, and treats everyone with respect. • Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. • Follows all department quality standards/criteria. Raises concerns and issues to management. • Understands department's key performance indicators (KPIs) and contributes to achieve these goals both individually and as a team. • Other duties as needed or required. ADDITIONAL RESPONSIBILITIES • Ability to be on call 24 hours a day, 7 days a week for global operations, by periodically providing off-hours, evening, and weekend support to accommodate maintenance windows and issue resolution • May occasionally guide less experienced associates to help with technical projects • Some travel may be required. REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Bachelor's degree in Computer Science, Information Technology, or equivalent experience. • 10+ years of senior hands-on experience in enterprise network and server engineering roles. • Expert-level experience in Active Directory and Group Policy across multi-domain environments. • Strong PowerShell scripting capabilities for automation and system management. • Proficient in Windows Server (2012-2025) and Linux administration. • Strong Microsoft 365 (M365) administration and troubleshooting experience. • Strong knowledge of certificates and certificate authorities (PKI infrastructure). • In-depth understanding of Layer 2/3 networking, including VLANs, routing, and switch configuration. • Experience with Cisco and Ruckus switches, including LAG setup and maintenance. • Experience managing VMware, Hyper-V, and Proxmox virtualization platforms. • Proficiency with SAN/NAS solutions, including Synology NAS. • Strong security knowledge, with the ability to implement protection at all layers of the OSI/TCP/IP model. • Experience with network monitoring tools (SNMP, What's Up Gold, PRTG). • Excellent technical documentation skills and the ability to train and mentor others. PREFERRED QUALIFICATIONS • Experience in Global Network • Knowledge of VOIP Telephony a plus • Experience in leading or supervising a team a plus PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, crawling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Driving cars and other IT equipment Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes or chemicals Working at heights Use of special visual or auditory protective equipment Walking on uneven ground PPE Requirements Safety glasses Steel-toe slip-resistant shoes - When in production area Hearing protection (e.g. ear plugs, ear muffs) - When in production area Face covering (mask) in accordance with company policy. Hardhat/bump camp IT Application COMPENSATION RANGE: $100,000 - $130,000 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Milliken & Company is a global manufacturing leader whose focus on materials science delivers tomorrow's breakthroughs today. From industry-leading molecules to sustainable innovations, Milliken creates products that enhance people's lives and deliver solutions for its customers and communities. Drawing on thousands of patents and a portfolio with applications across the textile, flooring, chemical and healthcare businesses, the company harnesses a shared sense of integrity and excellence to positively impact the world for generations. Discover more about Milliken's curious minds and inspired solutions at Milliken.com and on Facebook, Instagram and LinkedIn. Job Description: The open position is an Exempt Salary, IT position, created to provide site IT support for the associates working at the Milliken "Highland" Industrial Fabrics Manufacturing Facility, located in Cheraw, South Carolina. The Systems Engineer I serves as the primary on-site IT resource for our manufacturing facility, providing hands-on technical support for systems, networks, and end users. This role is critical to ensuring the reliability, security, and performance of IT systems that support manufacturing operations. The Systems Engineer I will play a key role in the company's transition to SAP, assisting with system readiness, user support, troubleshooting, and coordination with corporate IT and external partners to ensure a smooth and successful implementation. Job Summary: We are looking for a tech-savvy IT Site Support person to be responsible for providing technical assistance with computer systems, hardware, and software. As an IT Support person, you are responsible for responding to email, in-person, or phone queries and for offering technical support to the Plant using computer systems, hardware, and software. To be a successful IT Support person, you should be well-versed in all aspects of computer systems configuration, set up, and maintenance. You should also have excellent interpersonal and communication skills. You will be working in a fast-paced manufacturing setting. Key Responsibilities Manufacturing & End-User Support Serve as the primary IT point of contact for the manufacturing facility. Provide day-to-day technical support for desktops, laptops, mobile devices, printers, and peripherals. Troubleshoot and resolve hardware, software, and network issues impacting production and office staff. Support shop-floor systems, workstations, scanners, label printers, and other manufacturing-related technology. Ensure minimal downtime and rapid response to production-impacting IT issues. Systems & Infrastructure Assist with installation, configuration, maintenance, and monitoring of servers, networks, and systems. Support Windows-based environments, Active Directory, user accounts, and access controls. Assist with patching, updates, backups, and system documentation. Coordinate with corporate IT on infrastructure standards, cybersecurity policies, and best practices. SAP Implementation & Support Support the transition to SAP during implementation and go-live phases. Assist with system setup, testing, data validation, and issue resolution related to SAP. Provide first-level SAP user support and escalate issues as needed. Partner with business users to troubleshoot system-related process issues. Assist with user training, documentation, and change management activities. Security & Compliance Follow IT security policies and assist in maintaining compliance with internal controls. Help monitor systems for security risks and report incidents as required. Ensure proper access controls for systems supporting manufacturing operations. Continuous Improvement Identify opportunities to improve system reliability, performance, and user experience. Document procedures, configurations, and troubleshooting steps. Support additional IT projects as assigned. Required Qualifications Associate's or Bachelor's degree in Information Technology, Computer Science, or a related field (or equivalent experience). 1-3 years of experience in a systems, desktop, or IT support role, preferably in a manufacturing or industrial environment. Strong knowledge of Windows operating systems and Microsoft Office. Basic understanding of networking concepts (LAN/WAN, TCP/IP, DNS, DHCP). Experience supporting end users in a fast-paced, operational environment. Strong troubleshooting, communication, and customer service skills. Preferred Qualifications Experience supporting manufacturing or plant-floor environments. Exposure to ERP systems; SAP experience or implementation support is a strong plus. Familiarity with Active Directory, Group Policy, and basic server administration. Experience working with ticketing systems and IT documentation. Understanding of OT/IT environments or shop-floor systems is a plus. Physical & Work Environment Requirements Must be responsible for your personal safety, comply with all site safety rules, attend required safety meetings and report all accidents and near misses immediately. Ability to work on-site at the manufacturing facility. Ability to walk the production floor and support equipment in industrial environments. Occasional lifting of IT equipment (up to 50 lbs). Flexibility to support off-hours or go-live activities during the SAP implementation as needed. Why Join Us Opportunity to play a key role in a major SAP transformation. Hands-on exposure to manufacturing systems and enterprise technology. Collaborative environment with growth and learning opportunities. Competitive compensation and benefits package. We offer an impressive compensation/benefits package, including 401K, health, life, disability insurances and much more. For more information about our company, please visit our website: *********************** Please check out the Highland site video at: ************************************************** Please ensure that your resume reflects a detailed account of your skills as they relate to the requirements of this position. To be considered for this position, please include your salary requirements. NO 3RD PARTY/UNSOLICITED RESUMES ACCEPTED! Milliken is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to actual or perceived race, color, creed, religion, sex or gender (including pregnancy, childbirth or related medical condition, including but not limited to lactation), sexual orientation, gender identity or gender expression (including transgender status), ancestry, national origin, citizenship, age physical or mental disability, genetic information, marital status, veteran or military status or any other characteristic protected by applicable law. To request a reasonable accommodation to complete a job application, pre-employment testing, a job interview, or to otherwise participate in the hiring process, please contact ******************************.

The Systems Engineer II supports the design, development, and integration of surgical Navigation and Robotics systems under the guidance of senior systems and project leadership. This role contributes across the system life cycle, including requirements development, system characterization, testing, verification support, and design transfer activities. The Systems Engineer II works cross-functionally with mechanical and software engineering teams, as well as quality, regulatory, marketing, and operations, to ensure system requirements are clearly defined, implemented, and verified. Essential Duties and Responsibilities * Support the definition and characterization of system-level accuracy for surgical navigation and robotics platforms, ensuring alignment with clinical, regulatory, and business requirements. * Contribute to the design, construction, and characterization of navigated arrays and surgical instruments under established design guidelines. * Collaborate with internal stakeholders (clinical research, marketing, surgeons, etc.) to help capture, document, and refine user needs and system requirements. * Support concept and early-phase development activities, including feasibility testing and technology evaluations. * Develop and execute system and sub-system tests during development, and support formal verification and validation activities. * Assist with compliance and certification testing (e.g., IEC 60601-1) under guidance from senior engineers and quality/regulatory partners. * Maintain and update Design History File (DHF) documentation and support Change Order activities. * Work closely with a project manager, or directly manage projects as appropriate, to drive clear timelines that are executed on time and on budget. * Lead or support the execution of Design Control Phase reviews. * Be a key resource in driving verification and validation activities: be responsible for ensuring design documentation is clear and complete for hand off to Verification Engineering; be a coach and mentor in developing formal test methods to support the V&V team; articulate testing challenges and needs early in the system life cycle to drive cross-functional engagement. * Other duties as assigned.

"Together, we transform lives and communities!" National Community Renaissance (National CORE) is a nonprofit affordable housing developer, but our work is not about bricks and mortar, rather creating healthy communities that thrive and prosper for many generations to come. At National CORE, we support families and seniors by providing housing communities that are affordable, safe, and of the highest quality. We enhance neighborhood stability through long-term management and maintenance, as well as industry-leading services such as senior wellness, preschool and after school programs, and family financial training. Benefit Summary: At National CORE, we offer competitive compensation packages and comprehensive benefit plans that include medical, dental, vision, 401(k) plan with match, Life Insurance, LTD, FSA, paid holidays, vacation, and sick time. About the Job: National CORE's Information Technology department is an ever exciting, dynamic environment. We are focused on empowering our customers through current technology, superior support, and proactive interactions. We are looking for an individual with a strong technical background, excellent communication skills, and an ability to work collaboratively. We need an individual with extensive experience designing, configuring, and managing network infrastructures and deploying and managing systems on our network. An individual with a 'can do' attitude that is an analytical thinker is essential for problem resolution, planning, and process/policy development. RESPONSIBILITIES Strategy and Planning: Designing and implementing short and long-term strategic goals for managing and maintaining CORE's systems and software. Ensure that all planned and in-place system architectures are aligned with CORE's goals. Provide expertise and architectural assistance to other IT staff. Conduct research on new technologies, create and develop plans for investing in such systems that will increase cost effectiveness and flexibility. Design, configure, operate and perform maintenance on networking and computer systems ' including hardware, software, web portals, internet and intranet connections, firewalls, servers, and security ' that allow company infrastructures to function. Acquisition & Development: Design, create and monitor the implementation of end-to-end integrated systems. Review new and existing system designs and make recommendations for improving or altering the systems, including negotiating and administering vendor and consultant contracts. Operational Management: Consult with department heads and end-users to further infrastructure development. Develop and execute test plans to check technical performance of infrastructure and report findings and make recommendations for improvement. Improve customer service, perception, and satisfaction. Overall systems and infrastructure monitoring, administration and maintenance of systems integrity. Attend company sponsored events that relate to the development of the team, which from time to time may include overnight stays at locations away from the employee's home. SKILLS & QUALIFICATIONS Technical Proficiencies: Must not only possess proficient network and infrastructure skills, but also require organization and conceptualization skills. Ability to easily engage in abstract thinking and logical reasoning and can self-evaluate and adapt efficiently. In addition, must have: Experience conducting technology, trends, standards and products research Proven experience identifying, analyzing and resolving system problems Project management experience managing multiple projects concurrently Expertise designing, managing and supporting: Servers DNS, file servers, mail servers, and NAS equipment Microsoft related technologies Windows Server, Exchange, Active Directory, SQL, SharePoint, and Office 365 including migrating on-premise Exchange to O365, and deploying and managing Microsoft Teams and OneDrive Network level support network switches; voice switches, LAN and WAN connectivity, routers, firewalls, and security SD-WANs Managing vendors, infrastructure, security, and troubleshooting Remote access support VPN, Terminal Services and other remote support tools Virtualization VMware, Citrix, and Microsoft Cloud solutions Experience evaluating solutions, managing vendors, project planning, implementations, and administration of cloud-based software solutions Remote monitoring and management - update agent scripts, respond to alerts, monitor dashboards, and periodic system review. Document maintenance - for all computer systems and network infrastructure Manage all work, including incidents, service requests, change requests, etc. in an ITSM solution Additional Knowledge/Abilities/Skills: Interpersonal skills - such as telephony skills, verbal and written communication skills, active listening and customer-care Technical awareness - ability to match resources to technical issues appropriately Self-motivated with the ability to work collaboratively in a fast-moving environment Ability to multi-task and adapt to changes quickly EXPERIENCE & EDUCATION Bachelor's degree in computer science, engineering or information systems or eight to ten years of related work experience preferred. Professional IT Certifications, such as Microsoft MCP, MCSA or MCSE, VMware VCP, etc. preferred. PHYSICAL REQUIREMENTS/WORK ENVIRONMENT Operate computer and office equipment. Work is primarily sedentary in nature. National Community Renaissance is an equal opportunity employer.

ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. FLUID SYSTEMS ENGINEER II A Fluid Systems Engineer II, Neutron leads the design, build, and test of their fluid systems across the Neutron launch vehicle. You will collaborate with and provide guidance to a team of engineers in the Fluid Systems department to turn vehicle-level requirements into a fluid network that enables Neutron to operate with aircraft-like reusability and reliability. WHAT YOU'LL GET TO DO * Perform trade studies and sizing - using hand-calcs, analytical models or test data - to define key elements of system architecture * Provide guidance & mentorship to teammates on and beyond the fluids team to inform fluid system design, test & operations best practices * Lead key fluid system design, manufacturing and test reviews * Coordinate with component design, GSE, propulsion, GNC and other interrelated teams to solve multidisciplinary issues * Create and maintain analytical models that characterize and predict system behavior under all relevant conditions * Champion efforts to create and maintain piping and instrumentation diagrams, system CAD, production drawings, and system test and operations procedures * Perform planning, analysis, and troubleshooting of system performance during real-time operations and post-test data reviews * Project management including development schedules, vendor management, budgeting, etc. * Create tools to enhance the team's analysis capabilities, streamline workflow and optimize launch operations YOU'LL BRING THESE QUALIFICATIONS: * Bachelor's degree in Mechanical Engineering or relevant engineering discipline * 2+ years of experience designing, operating, troubleshooting fluids systems * Strong engineering fundamentals in fluid dynamics and thermodynamics * Solid understanding of fluid components such as valves, pressure vessels, flex elements & fittings * Working knowledge of manufacturing, fabrication, integration processes & quality control relevant to fluid components (valves, flex hoses, tubing, bellows, etc.) THESE QUALIFICATIONS WOULD BE NICE TO HAVE: * 8+ years experience in a fast-paced aerospace environment where you have completed difficult projects while collaborating effectively with other key groups * Ability to earn trust, maintain positive & professional relationships, & contribute to a culture of inclusion * Experience working with a distributed team across the globe * Advanced degree in a fluid mechanics-heavy field * Experience with oxygen & methane systems * Experience using fluids analysis tools such as REFPROP and GFSSP * Experience using Siemens NX * Experience using Python * Proven ability to practically apply engineering fundamentals to solve real, complex problems * Demonstrated ability to rally a team to make & execute good decisions in a fast-paced environment with information available ADDITIONAL REQUIREMENTS: * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. * Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. * Must be physically able to commute to buildings * Occasional exposure to dust, fumes and moderate levels of noise. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only) $10,000-$125,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

From concept to design to execution, be part of the team that gets everyday products to people. Do you want to have an impact on creating products from today's top brands? Does having a company care about your career today and into the future motivate you? Does an environment where your opinions matter excite you? Are you a natural born tinkerer? If so, you have found your next calling! Grantek is a recognized leading provider of integrated automation, smart manufacturing and industrial information solutions in the global marketplace. Our clients are some of the worlds most respected Fortune 100 companies and recognized consumer brands: Mondelez, Brita, Molson Coors, Coca-Cola, Kraft-Heinz, to name a few. We offer an atmosphere where you can express your creative ideas and talents by working on a variety of projects and technologies. Using today's leading edge technology, you will partner with clients to solve their most complex manufacturing and industrial information problems. At Grantek, we provide a competitive and all-encompassing compensation package, emphasising our commitment to our employees' well-being. Our benefits, including top-notch medical, dental, vision coverage, paid time off, 401(k), life insurance, and flexible work schedules, reflect our dedication to fostering a supportive work environment. The salary range for this position is $75,000 - $120,000 per year, complemented by benefits, bonuses and additional extra hours payments. For more information on what Grantek offers, visit: ********************************************************** We are committed to providing a positive and healthy corporate culture, one that empowers employees, promotes knowledge-sharing, and encourages strong friendships and social connections amongst all team members. We are a team of dedicated Engineers and Designers with an average of 7 years' tenure at Grantek. The vast majority of our employees have started off their careers at Grantek and have grown into successful senior team members who are integral to our client's manufacturing processes. Job Description As a key member of Grantek's Engineering team, you will be developing real-time automation solutions from the manufacturing plant floor to the enterprise level, using a variety of programming, configuration, and design tools: PLC and PAC Programming, Operator Interface and HMI application design, SCADA design, Network design, Database design, Vision system design, Machine Safety system design, Servo motion control, Information Solution design, MES design, ERP connector development, High-level software solution design (involving C#, HTML5, .NET, SQL, VB, VBA, and more). All junior team members will enter our mentoring program, where they will work directly beside our Senior Engineer professionals. Key-skills and interests: machine and process control, high-level programming, information solutions, database development, operational efficiency, mechatronics. Primary Job Responsibilities: Engineering and implementing real-time automation controls and information solutions Conceptualizing during the design phase of the project life cycle System programming, debugging, and testing Creating documentation, including project engineering notes, project proposals, project design traceability documentation, case studies, and more Commissioning new solutions at client sites; finding opportunities for improvements Creating methodologies and complex problem-solving Learning new technologies Mentoring colleagues on your expertise and knowledge base Having fun and being challenged Technologies Used PLC Programming Platforms: Rockwell / Allen-Bradley, Siemens, Omron, Modicon, GE, etc. System Networking: Ethernet, Routing and Switching, EthernetIP, DeviceNet, ControlNet, Profibus, DH+, Remote IO, Modbus, etc. HMI Platforms: Rockwell / Allen-Bradley, Wonderware, Schneider Electric, etc. SCADA Platforms: Rockwell / Allen-Bradley, Inductive Automation, Wonderware, GE, Siemens, etc. Servo Motion Control: Rockwell / Allen-Bradley, Emerson, Omron, etc. Vision Platforms: Cognex, Datalogic, Keyence, etc. MES Platforms: Rockwell / Allen-Bradley, Sepasoft, Wonderware, etc. High-level Programming: C#, HTML5, .NET, Cloud, SQL, VB, VBA, etc. Database Platforms: Microsoft, Oracle, etc. Operating Systems: Microsoft (current and legacy to NT), Unix, Linux, etc. Project Documentation: Microsoft Office Qualifications Successful or upcoming completion of B.Sc. Computer Engineering, Mechatronics, Computer Science, Electrical Engineering, or related Engineering Technology degree. At least 4 years of hands-on experience with some or all of the technologies listed in the “Technologies Used” section above. Meticulous, conscientious, analytical, focused, self-starter individual, who is a quick learner. Excellent communication skills - both verbal and written. Valid Driver's License Have full-time access to a personal vehicle Willingness to travel* b/w 30- 50% *Flexibility for local travel with occasional day trips, and the opportunity for additional travel throughout North America based on individual preferences and project requirements. Additional Information We are committed to the principle of equal employment opportunity for all employees and to provide Grantekians with a work environment free of discrimination and harassment.

Job Description Seeking a Systems Engineer with experience to perform on programs within the Department of Defense (DoD). Responsibilities • Participate in programmatic and technical discussions to initiate new program concepts • Demonstrate technical knowledge in designing and/or testing practical solutions to engineering problems and an ability to guide the engineering development • Provide expertise and assistance to the Government Program Manager in the execution of programs • Integrate and coordinate program activities with the Program Manager and other government and SETA team members • Perform detailed task planning and oversee transition progress with a range of DoD partners • Oversee scheduling of program activity and milestones, and contractor progress Required Qualifications: • BA/BS Degree required with a preference for technical or programmatic leadership • Top Secret Clearance, SCI Eligible • 5+ Years Relevant Experience Highly Desired Qualifications: • Masters Degree Preferred Blue Sky Innovators, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you are a qualified job seeker with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access ******************************** as a result of your disability. To request an accommodation, please email us at ***************************** and provide your name and contact information. Please note: this is only for job seekers with disabilities requesting an accommodation.

A leading aerospace technology company is seeking a Lead System Modeling Engineer to provide MBSE expertise for space and missile defense programs. This position involves developing system models in alignment with DoD policies and contributing to digital thread architecture. Candidates should possess strong experience with MBSE tools like Cameo and have an active Secret clearance. The role offers competitive compensation with a salary range from $160,000 to $225,000, depending on location and experience. #J-18808-Ljbffr

Hi , Hope your are doing good. I have a job opportunity related to your profile with one of our client, please find below Job Description for your review. If you are interested and available please send your updated resume along with your contact details to discuss further. Role: Windows Admin MS intune, SCCM Duration: Full TIme Location: Torrance, CA Primary Skills : In-depth knowledge on Windows admin ( 7/8/10), MS intune, AS, SCCM, AD, Outlook ( 2010/13/16 ) O365 and VPN MS Intune , AD , MDT , Dell Hardware , SCCM ( 6 to 10 Yrs. exp. ) · 4 to 6 years of IT infrastructure function · In-depth knowledge on · Working knowledge on Citrix, VMWare and Azure · Hands-on Build Windows 7 Images on laptops and Desktops · Implementation experience on Intune in Azure cloud · Implement Packaging, Deployment Infrastructure, Depot Services · Domain Migration for Laptops and Desktops · One Drive migration to cloud · Microsoft Office migration from 2010/2013 to 2016 · Technical knowledge and experience in management of large enterprise customers end user computing · Configuring Hardware, applications, Network connectivity, User Access, mobile computing · Monitoring and maintain systems · Coordinate with vendor for the hardware support for laptops · Experience on Service now and ITIL processes Essential duties for the position include, but are not limited to the following: · Provide onsite support to Authorized Users with operational and technical support and to meet specified SLAs · Resolve incidents and problems associated with EUC equipment · Perform reactive troubleshooting to effectively identify potential incidents or problems, and attempt to eliminate them to occur in the future · Support Authorized Uses connecting or attempting to connect to corporate network and assist in the coordination and completion of accessing LAN, print, and file services; connection to WAN; and accessing appropriate LAN segments · Provide repair and maintenance for mobile devices · Install, upgrade and repair EUC equipment (desktops, laptops, monitors, and associated peripherals) · Provide software break/fix services and replacement of non-warranty assets for end users · Provide network printers and scanner network connectivity, including providing network support for device configuration, for IP addressing, and direct TCP/IP output · Provide warranty and break/fix support for networked printers and scanners · Configure and support end users on mobile computing platforms · Provide VIP support for equipment including desktop devices, mobile devices, display screens, video systems, docking stations, communication devices, direct attached printers, local printers, scanners, wireless networking, etc · Create, change and remove printer configurations and queues based on requests and in accordance with SLAs · Provide on-site hardware support for general troubleshooting and problems for end user computing technologies · Provide regular, accurate, and timely feedback regarding customer requirements which shall include supervising assignments and maintaining timely communication with sales, operations, and branch office personnel. · Utilize problem management database and systems to track and report on customer calls and requests. · Communicate technical information to technical and non-technical team and customers. · Desk side support services as required Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.