Inteplast Group jobs in Phoenix, AZ

Employment Status: Hourly Full-Time Function: Distribution/Logistics Pay Grade and Range: USXX - Grade USXX Hourly 37 ($36,103.41 - $67,049.19) Bonus Plan: OIP Target Bonus: 5.0 Hiring Manager: Brandi L Pratt Collins Recruiter: Nancy Laughlin Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Job Responsibilities Check-in / Material verification Enter receipts Material consolidation, FIFO material Stock material safely and correctly Transfer material in EPICOR May rotate into the Shipping or Receiving role, as required Supply material to all work areas in the factory Perform daily forklift Inspections Keep warehouse clean and well organized Job Requirements Strong organizational skills Computer skills Forklift and Bendi experience Strong attention to detail Be able to prioritize and work with a sense of urgency Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

We are seeking a Process Technician to support operations at a single manufacturing site and across customer locations. This role is critical in ensuring smooth onboarding of new jobs, validating processes handed off by R\&D, and maintaining sustainable production practices. Additionally, the Process Technician will provide technical support to ensure products remain in spec, lead quality and efficiency improvements, and assist with new product development initiatives. The ideal candidate will be highly organized, detail-oriented, and skilled at translating technical requirements into practical, repeatable processes while responding quickly to production challenges. Why work at MCC: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance, and 401(k) Paid Holidays: New Year's, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Key Responsibilities: Job Onboarding: Lead the introduction of new products or jobs into production, ensuring readiness and alignment with plant capabilities. Training & Support: Develop and deliver training for floor personnel on new processes, equipment, and best practices. Process Validation: Confirm that R\&D handoffs are feasible and sustainable for long-term production. Technical Support: Provide proactive and reactive support to operators, ensuring products remain in spec and resolving issues quickly. Documentation & Standards: Create and maintain detailed process documentation, SOPs, and quality standards. Trials & Testing: Plan and execute trials to validate processes, troubleshoot issues, and optimize performance; conduct lab evaluations and comparative analysis with competitive products. Continuous Improvement: Identify opportunities to streamline workflows and enhance efficiency in label manufacturing and related operations. Customer Interaction: Support customer and MCC-sponsored new product development projects; participate in coater trials and customer visits, occasionally requiring on-site work across shifts. Quality Oversight: Maintain lab/testing equipment and calibrations; initiate raw material complaints (SNAR), track corrective actions, and manage quality holds. Qualifications: Bachelor's degree in engineering or related field (or equivalent experience); 2- or 4-year degree or 2-4 years of related experience/training acceptable. Experience in manufacturing environments, preferably in labels or similar industries. Strong problem-solving skills and ability to manage multiple priorities. Math skills (including Algebra) and knowledge of printing/converting materials and technologies. Excellent communication and training skills; ability to write reports, business correspondence, and procedure manuals. Ability to travel for internal and customer visits and trials. Other Considerations: Occasional lifting of rolls/samples up to 40-45 lbs. Work around coating and slitting equipment; safety shoes may be required. Professional attire for customer visits; flexible hours for multi-shift coverage. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: The HVAC Maintenance Team Lead 3 will perform Maintenance inspections and ensure all maintenances are completed per the contract/filter belt list. Education and Experience: Universal EPA Certification Minimum of 8+ years of Commercial HVAC Service experience preferred High school diploma or equivalent GED certificate preferred Skills and Abilities: Excellent written communications skills Able to work well with other technicians and tradesman Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chattanooga Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $15.34 - $21.91 Target Bonus: 5.0% Req ID: 27755 Position Summary Entry level assembly of electrical components in tooling. Role Qualifications High school diploma/GED, vocational/technical school or equivalent work experience. Position Responsibilities Basic comprehension of prints, design, schematics, and pneumatics Understands and implements 6S program Basic soldering ability Basic ability to build tooling panels Identifying part numbers from schematics through BOM Addressing and labeling parts with I/O numbers Mounting parts and routing cables on fixtures Knowledge ISO 9001 documentation Essential Skills and Experience Basic measurement skills Basic hand/power tool knowledge Basic mechanical and electrical experience ability Reporting to this position: N/A Environmental, Health & Safety (EH&S) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe and environmentally friendly manner and observe all company EHS procedures. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. Attend required EHS training. Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. Work environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts and high voltages. The noise level in the work environment is usually moderate. ISO-14001 Complies with ISO 14001, and other relevant standards. Support, implement and understand the intent of the EMS policy. Participates with ISO-14001 as required. General sign-off: The employee is expected to adhere to all company policies. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: Responsible for performing maintenance and service for our commercial HVAC customers, utilizing our technology, technical capability, and exceptional customer service to provide customer-first solutions. Education and Experience: Universal EPA Certification Minimum of 8+ years of Commercial HVAC Service experience preferred High school diploma or equivalent GED certificate preferred Skills and Abilities: Excellent written communications skills Able to work well with other technicians and tradesman Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chattanooga Employment Status: Salary Full-Time Function: Engineering Pay Range: ($74,603.39 - $106,576.28) Target Bonus: 8.0% Req ID: 27551 Summary Lincoln Electric Automation is seeking a Mechanical Design Engineer for our Chattanooga, TN location. As a Mechanical Design Engineer, you will focus on conceptualizing and detailing innovative automation systems including robotic work cells, tooling, and precision positioning equipment. Using advanced 3D CAD platforms (ProE/Creo, SolidWorks - preferred), you'll take ownership of mechanical design from concept through build, testing, and service support. This position involves heavy mechanical engineering design work to create custom tooling and fixtures. In addition to competitive pay, Lincoln Electric offers an annual bonus plan, tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do Lead the mechanical design of custom automation systems, often managing one (1) complex project at a time. Develop and document 3D mechanical designs using CAD software such as SolidWorks. Perform engineering calculations (static and dynamic systems) to ensure mechanical performance and safety. Collaborate with cross-functional teams-including fabrication, machine build, controls, and project management-throughout the project lifecycle. Provide technical drawings, mechanical layouts, and detailed part documentation to support production and procurement. Interact with customers regularly during design and development to ensure alignment with technical requirements and expectations. Ensure that mechanical designs meet all project specifications, quotations, and purchase order terms. Take ownership of small-scale projects as Engineering Lead, Designer, and Detailer. Support Estimating, Sales, Production, and Service departments with technical insight and collaborative problem-solving. Proactively manage timelines and to meet project schedules in a fast-paced environment (typical duration: 4-8 weeks). Required Experience & Skills 2+ years of mechanical design engineering experience Industrial automation or custom equipment development industry experience preferred. Associate or Bachelor's degree in Mechanical Engineering, Mechanical Design, or related field preferred but not required. Proficiency with 3D CAD software (ProE/Creo and/or SolidWorks required). Solid understanding of mechanical principles, fabrication methods, and materials. Basic knowledge of electrical, pneumatic, and robotic system integration is a plus. Strong mechanical aptitude with a hands-on approach to problem-solving. Experience in customer-facing technical roles and project collaboration is desirable. Proficiency in Microsoft Office tools (Word, Excel); experience with project management software is a plus. Ability to adapt to shifting priorities, solve complex design challenges, and deliver results under tight timelines. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lee Company provides core construction services of HVAC, plumbing and electrical for large and small commercial projects throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and construction excellence since 1944. Safety is a core value that permeates how we live, train, work, and look out for our teammates. Summary of Job: Supervises journeyman level construction, installation, alteration and repair of sheet metal products and equipment in accordance with blueprints, drawings and work orders; provide technical guidance and direction to lower level employees. Education and Experience: High School diploma, GED, or equivalent, and five years related experience and/or training is required. Supervisory experience a plus. Skills and Abilities: Minimum of 5 years' experience in sheet metal installation and fabrication. Experience should be related specifically to assembling hoods and sheet metal air-conditioning and heating units. Proven working knowledge and experience in ability to read and interpreter blue prints accurately Ability to troubleshoot service issues with systematic, thoughtful, timely and effective solutions and procedures Demonstrate proper and safe use of tools and related equipment Experience in providing quality, professional customer related services Ability to work and communicate effectively individually as well as in a team environment Ability to handle disruptions in stride with professionalism. Ability to work independently in commercial and construction settings. Company Perks & Benefits Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. Compensation: $28.11 - $34.00 hourly pay What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chattanooga Employment Status: Salary Full-Time Function: Engineering Pay Range: ($74,603.39 - $107,000.49) Target Bonus: 8.0% Req ID: 27572 Summary Lincoln Electric Automation is seeking an Integration Engineer to join our team in Chattanooga, TN location. As an Integration Engineer, you'll play a key role in designing, developing, and refining automated welding systems that drive our customers' success. This position serves as bridge between Mechanical Design, Manufacturing Engineering, and our customers, ensuring that every automation solution meets the highest standards of performance, reliability, and innovation. Using your expertise in robotic programming, system integration, and simulation software, you'll bring complex automation concepts to life-transforming advanced designs into world-class, production-ready systems. In addition to competitive pay, Lincoln Electric offers an annual bonus plan, tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You'll Do Automation & Integration Program, integrate, and debug robotic and PLC systems for automated welding and assembly equipment. Conduct offline robot programming, reach studies, and layout simulations using Cimstation, RoboGuide, RobotStudio, and Motosim. Utilize CAD modeling tools (such as Creo) to develop and modify part designs, tooling, and layouts. Support the installation, setup, safety validation, and qualification of automation systems prior to production release. Process Improvement & Technical Support Identify opportunities to improve product quality, process efficiency, and cost-effectiveness. Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods. Troubleshoot design, material, or process issues in both new and existing systems. Incorporate new technologies, methods, and materials to improve operations and manufacturing performance. Provide technical support to production teams across shifts, resolving complex equipment and process issues. Project Management & Collaboration Partner with design, manufacturing, and project management teams to ensure seamless integration and execution. Lead or support major automation projects, including new equipment launches and technology demonstrations. Work with vendors, contractors, and corporate engineering teams to deliver high-quality solutions on time and within budget. Leadership, Training & Continuous Improvement Mentor and train junior engineers and technicians in robotics, integration, and system troubleshooting. Support apprenticeship and RIA certification programs, as well as facility tours and recruitment efforts. Participate in integration and tooling audits, maintaining documentation and driving continuous improvement in programming and integration practices. Required Experience & Education Education: Bachelor's degree in Engineering or related technical field (or equivalent experience). Experience: Hands-on experience in a mechanical, manufacturing, or automation environment. Proficiency in robotic programming and simulation tools (Fanuc, ABB, Yaskawa, etc.). Knowledge of manufacturing processes, tooling, and system integration. CAD proficiency (preferably Creo). Complies with ISO 14001, and other relevant standards. Support, implement and understand the intent of the EMS policy. Participates with ISO-14001 as required. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lee Company provides core construction services of HVAC, plumbing and electrical for large and small commercial projects throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and construction excellence since 1944. Safety is a core value that permeates how we live, train, work, and look out for our teammates. Summary of Job: Supervises journeyman plumbers and helpers and the work performed in plumbing functions, including installs and repairs pipes, fittings and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes, studies building plans and working drawings to determine work aids required, and sequence of installations. Provide input on plumbing plans being developed and then handle implementation and maintenance of these systems. Education and Experience: High School diploma, GED, or equivalent, and five years related experience and/or training is required. Supervisory experience a plus. Skills and Abilities: Ability to troubleshoot issues with systematic, thoughtful, timely and effective solutions and procedures Demonstrate proper and safe use of tools and related equipment Experience in providing quality, professional customer related services Ability to work and communicate effectively individually as well as in a team environment Ability to handle disruptions in stride with professionalism. Ability to work independently in a commercial setting. Company Perks & Benefits Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Summary of Job: This position installs and troubleshoots washers, ranges and other large appliances for their customers. They need to know how to connect water or gas lines, and how to check for leaks once the appliances are installed. This position must repair or replace any defective components found in appliances. They instruct their customers on how to operate the appliances properly. They must know how to dismantle and reassemble appliances to make their diagnosis. This position must also provide outstanding customer service, have good communication skills and have the ability to work in a team environment. Education and Experience: High School diploma or GED required You must be able to work one Saturday a month. You must have at least 3 years of experience in the residential and commercial industry. Skills and Abilities: EPA Certified Must be AHAM CFC certified Company Perks & Benefits Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer . Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Build Your Career with an Industry Leader As the global leader of premium labels, Multi-Color Corporation (MCC) helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing expertise, MCC is focused on the future-developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. Position Objective The Reliability Engineer is a key driver of MCC's Total Productive Maintenance (TPM) strategy-responsible for building equipment reliability and asset care systems that enable world-class manufacturing performance. This role leads the analysis, design, and execution of preventive and predictive maintenance programs, while embedding TPM principles across all facility and utility systems. The Reliability Engineer partners closely with Maintenance, Operations, and Continuous Improvement teams to establish a culture of autonomous maintenance, equipment ownership, and proactive problem prevention. By developing standard work, training, and data-driven reliability programs, this position ensures our plants operate safely, efficiently, and with minimal unplanned downtime-directly supporting MCC's operational excellence and lean transformation goals. Why Work at MCC Competitive compensation: $95,000 - $130,000 Comprehensive benefits package including medical, dental, vision, and 401(k). Paid holidays including New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Christmas Eve, and Christmas Day. Opportunity to be part of a global leader in sustainable packaging and drive TPM excellence that transforms how our sites operate. Responsibilities Total Productive Maintenance (TPM) Leadership Serve as a TPM subject matter expert, driving implementation of MCC's TPM pillars (Focused Improvement, Autonomous Maintenance, Planned Maintenance, Early Equipment Management, and Skills Development). Partner with plant leadership to design and execute site-specific TPM deployment roadmaps and maturity assessments. Lead cross-functional kaizen events to identify equipment losses, eliminate chronic issues, and improve OEE (Overall Equipment Effectiveness). Coach maintenance and operations teams in root cause analysis, condition-based monitoring, and daily equipment care standards. Champion Autonomous Maintenance by training operators in basic inspection, cleaning, and lubrication activities to increase equipment ownership and engagement. Develop and track key performance indicators (KPIs) for reliability, including MTBF (Mean Time Between Failures), MTTR (Mean Time To Repair), and OEE. Preventive & Predictive Maintenance Ensure all equipment meets MCC safety, quality, and operational standards. Lead the development and execution of robust preventive and predictive maintenance programs. Audit and improve AssetEssentials (or other CMMS) data accuracy, utilization, and reporting to enable effective decision-making. Analyze failure modes, equipment histories, and maintenance data to identify improvement opportunities. Partner with engineering and operations to plan equipment upgrades or replacements to improve reliability. Mentor and coach Maintenance teams to build a proactive, data-driven reliability mindset. Training & Capability Building Design and facilitate training programs for maintenance and production personnel on TPM, equipment care, and reliability fundamentals. Develop standard work and visual controls to support consistent maintenance practices across MCC sites. Collaborate with Corporate Standards Committees to align training content with global TPM deployment and corporate best practices. Communicate training plans and progress to site leadership, ensuring accountability and alignment to TPM goals. Travel Travel may be required up to 75%, including daily, overnight, or extended stays based on business needs (e.g., 10 days on / 4 days off). Travel frequency will be determined by the supervisor based on TPM, preventive maintenance, and training priorities. Qualifications Bachelor's degree in Engineering, Maintenance Management, Facility Management, or a related technical field (or equivalent experience). Minimum 10 years of reliability, maintenance, or operations experience in a manufacturing environment. Demonstrated expertise implementing Total Productive Maintenance (TPM) or similar reliability-centered maintenance systems. Strong knowledge of mechanical, electrical, pneumatic, and hydraulic systems. Proven success leading maintenance teams and improving equipment performance in a lean manufacturing setting. Experience facilitating TPM kaizens, OEE improvement projects, or AM/PM pillar activities. Familiarity with CMMS (AssetEssentials or equivalent) and maintenance data analytics. Preferred Skills Proven ability to lead TPM deployment or coach site teams through TPM maturity stages. Strong analytical and problem-solving skills; able to identify patterns in maintenance data and drive systemic solutions. Excellent written and verbal communication skills; ability to train and engage employees at all levels. Advanced Excel or data visualization skills for performance tracking and analysis. Self-motivated, results-oriented, and capable of managing multiple priorities in a fast-paced environment. Demonstrated understanding of Lean tools such as 5S, Kaizen, SMED, and Standard Work. Confident decision-maker with a collaborative, hands-on approach to problem solving. Physical Requirements Regularly works in a manufacturing environment; must be comfortable standing for extended periods and navigating production areas. Must be able to lift up to 40 lbs. and wear required personal protective equipment (hearing, eye, and foot protection). Occasional work in an office environment, using computers and communication tools. Flexibility to work varying shifts or schedules as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Summary of Job: The Residential HVAC Installation Helper will assist HVAC Installation and/or Service Technicians with installations, maintenance, and service, including any ductwork, setting, and starting up split and package systems, gas piping, venting and electrical as required. Education and Experience 1-3 years of field experience (preferred) High school diploma or GED (preferred) EPA certified to handle refrigerant (preferred) Skills and Abilities: Able to braze copper Able to learn how to connect ductwork to indoor units (S/R Plenums) Basic computer knowledge Company Perks & Benefits Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer . Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chattanooga Req ID: 27857 Pay Range: $23.41 / hr - $38.46 / hr Bonus: 5% Summary Lincoln Electric Automation is seeking a Controls Design Engineer to design, develop, and implement electrical and automation systems for integrated tooling and advanced manufacturing equipment. This role focuses on control system architecture, hardware specification, PLC/HMI programming, and ensuring compliance with industry safety and quality standards. This is an on-site position located in our Chattanooga, TN plant. In addition to competitive pay, Lincoln Electric offers bonus compensation, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits! Responsibilities Develop electrical control system architectures, including schematics, wiring diagrams, and panel layouts. Specify, select, and integrate automation components such as PLCs, HMIs, servo drives, VFDs, sensors, actuators, and safety devices. Program PLCs, HMIs, and other control devices to implement control algorithms and logic Collaborate with mechanical, robotics, and fabrication teams to ensure system designs align with project objectives and customer specifications. Perform system testing and troubleshooting to ensure proper functionality. Produce technical documentation per standards and ISO 9001 processes, including design packages, test plans, and revision records. Maintain working knowledge of emerging automation technologies and relevant safety standards. Required Education & Experience Bachelor's degree in Electrical Engineering, Controls Engineering, or related field; equivalent experience considered. 3+ years of experience designing industrial control systems or automated machinery. Proficiency with AutoCAD Electrical or EPLAN for schematic and panel design. Solid understanding of AC/DC power distribution, motor control, motion systems, pneumatics, and industrial networking protocols. Experience with robotics integration, welding automation (arc, laser, resistance), or machine tooling systems preferred. Strong troubleshooting, analytical, and system-level problem-solving skills. Ability to manage multiple projects and adapt to changing priorities in a dynamic engineering environment. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lee Company provides core construction services of HVAC, plumbing and electrical for large and small commercial projects throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and construction excellence since 1944. Safety is a core value that permeates how we live, train, work, and look out for our teammates. Summary of Job: Supervises journeyman electricians and helpers and the work performed in electrical functions, including planning, diagramming, installing and repairing electrical systems, including the conduits of tubing or pipe often required by local electrical codes. Provides input on electrical plans being developed and then handles implementation and maintenance of these systems. Education and Experience: Must possess a high school degree or equivalency. Five years of related experience and/or training is required. Supervisory experience a definite plus. Electrical Journeyman license strongly preferred. NCEER certification strongly preferred. Skills and Abilities: Ability to read blueprints. Ability to run conduit and wire. Ability to troubleshoot issues in a timely and effective manner. Demonstrate proper sand safe use of tools and related equipment. Ability to work and communicate effectively as an individual as well as in a team environment. Ability to handle disruptions in stride with professionalism. Ability to terminate devices. Working knowledge of installing electrical systems in a new construction setting. Ability to lift, push, pull and move moderately heavy objects. Ability to ascend/ descend ladders. Must be able to handle stress and job demands. Must be able to cooperatively work with others. Company Perks & Benefits Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

This position is essential to the success of our retail stores. Customer Service Specialists work closely with wholesale and retail customers to determine their needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Customer Service Specialists are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and store. Customer Service Specialists are tasked with achieving excellent customer service, while consistently meeting the store's sales goals. The individual selected for this role will be expected to work at Store #3063 located at: 623 S Main St, Princeton, IL 61356. This is a part time position and the starting pay rate is $17.50/hr. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's customers, staff, employees, vendors, contractors, and the general public. At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 - Online Application Find the role(s) that interest you on our Careers page: ****************************** Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 - Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You'll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 - In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute-it matters to us. A general description of benefits offered can be found at ***************************** Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. Ensure high levels of customer satisfaction through excellent sales service Assist customers in person and over the phone by determining needs and presenting appropriate products and services Build productive trust relationships with wholesale and retail customers Process sales transactions accurately and consistent with policies and procedures Follow and achieve sales goals on a monthly, quarterly, and yearly basis Maintain precise work order files and formulas Pull appropriate products from the sales floor or warehouse Tint and mix products, as needed, to customer specifications Stock shelves and set up displays Clean store equipment Load/unload delivery trucks Assist in making deliveries, as needed Maintain in-stock and presentable condition assigned areas Remain knowledgeable on products offered and discuss available options Comply with inventory control procedures Suggest ways to improve sales Minimum Requirements: Must be at least eighteen (18) years of age Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future Must have a valid, unrestricted Driver's License Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation Preferred Qualifications: Have at least a High School diploma or GED Have at least one (1) year experience working in a delivery, retail, or customer service position Have previous work experience selling paint and paint related products Have previous work experience operating tinting and mixing equipment Ability to read, write, comprehend, and communicate in more than one language Ability to read, write, comprehend, and communicate in Spanish #SHWSales

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Michigan City Employment Status: Salary Full-Time Function: Engineering Pay Grade and Range: USXX - Grade USXX Salaried 57($74,603.39 - $138,549.16) Min $4,603 - Mid $106,576 Bonus Plan:8% Req ID: 27302 Job Summary As a member of the Engineering staff, the Electrical Engineer is responsible for the design of new products, prototypes, and carries through to full production. This Engineer will also be responsible for technical support of some mature products currently in production. This includes Code Changes, maintenance of Bills of Material, electrical schematics and drawings, assistance in troubleshooting and new installation verifications, design reviews, simple mechanical designs, documentation packages, pre-production builds and transfers to production. Primary Duties and Responsibilities Provides technical direction, serves as a point of contact or business liaison, prepares briefings for senior management and assists in problem resolution specific to the program / project. Designs and tests electrical and electronic products or systems. Designs and maintains electrical control systems and components to required specifications, focusing on safety, reliability, and cost. Creates wiring schematics, electrical harnessing, and Bills of Material relevant to electrical systems. Sizes and integrates overload and short circuit protections based on current applicable safety regulations, such as NEC, UL, and SAE. Writes manufacture and test procedures and reports. Participates in project teams and all activities related to the development and maintenance of products. Collaborates within the Engineering team to ensure design constraints are met, tested, and delivered on time and within budget. Provides technical support to Sales and Marketing for bids and proposals. Productively function in a fast-paced Engineering department that works intimately with manufacturing plant. Works cross-functionally with all other departments regarding electric controls and systems. Must be able to juggle priorities effectively. Must be able to transition from hands-on R&D or troubleshooting environment back to desk / office tasks effectively. Function well with group-oriented tasks, as well as solitary projects. Other duties as assigned. Job Qualifications and Skills Bachelor's Degree (BSEE or BSECET) from an accredited college or university. Minimum 2 years' experience in a job relevant to degreed field. Experience in design, repair, and analysis of electrical systems. Experience with CAN communication (SAE J1939 preferred). Must have exposure to electrical engineering principles and methodologies. Demonstrated 2D CAD system proficiency (preferably AutoCAD). Exposure to C, C++, and / or other programming languages. Data logging and sensor interface experience. Self-motivated, driven and goal-oriented. Possess strong verbal and written communication skills. Preferred Knowledge of PID controllers CAN communication experience Vehicle speed control experience Plusses Knowledge of compressor systems Advanced degree (MBA / MSEE) Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Summary of Job: Perform journeyman level construction, installation, alteration and repair of sheet metal products and equipment in accordance with blueprints, drawings and work orders; provide technical guidance and direction to lower level employees. Are you an experienced Sheet Metal Mechanic that takes pride in delivering high-quality mechanical systems that help businesses run smoothly and comfortably? If so, we have the perfect opportunity for you! As a key player in our construction team, you will be responsible for: Interpreting blueprints and specifications to determine the layout and configuration of sheet metal products. Fabricating, assembling, installing, modifying, and repairing sheet metal products using hand and power tools. Measuring, marking, and cutting sheet metal to size using specialized tools and equipment. Collaborating with other members of the construction team to ensure mechanical systems are installed on time and within budget. Ensuring all mechanical systems meet industry standards for quality and safety. We offer a competitive salary, comprehensive benefits package, and opportunities for growth and advancement. If you are a skilled and dedicated worker looking for a challenging and rewarding opportunity, we want to hear from you. Apply now! Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: Responsible for performing maintenance and service for our commercial HVAC customers, utilizing our technology, technical capability, and exceptional customer service to provide customer-first solutions. Education and Experience: Universal EPA Certification Minimum of 8+ years of Commercial HVAC Service experience preferred High school diploma or equivalent GED certificate preferred Skills and Abilities: Excellent written communications skills Able to work well with other technicians and tradesman Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.