Line up worker jobs in Kettering, OH

FirstEnergy at a Glance We are a forward-thinking electric utility powered by a diverse team of employees committed to making customers' lives brighter, the environment better and our communities stronger. FirstEnergy (NYSE: FE) is dedicated to integrity, safety, reliability and operational excellence. Headquartered in Akron, Ohio, FirstEnergy includes one of the nation's largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a regulated generating fleet with a total capacity of more than 3,500 megawatts. About the Opportunity This is an open position with Ohio Edison Co., a subsidiary of FirstEnergy Corp. [OEPP] Location: Springfield, OH Position Summary This position is a DOT (Department of Transportation) covered classification and is subject to random drug and/or alcohol screening Journeyworker Lineworker are responsible for building and maintaining electric power systems and for restoring electric service to commercial, industrial, agricultural and residential customers. They are expected to test, frame and set poles; climb poles, work in confined spaces; splice and terminate cables. Our Lineworker will have had successfully completed a federal or state sanctioned apprenticeship (with approved supporting documentation) and/or IBEW sponsored line worker apprenticeship. Work is predominantly outdoors and in all weather conditions. Lineworker must be able to drive safely, work extended hours; travel/transfer to new headquarter upon request at any time (General Construction Positions), and wear company provided Personal Protective Equipment. FirstEnergy is providing the hourly rate that the company in good faith believes it might pay for this position at the time of the job posting. This position is subject to hourly wage rates and increases. The starting wage rate for this position is $50.92 per hour with a top rate of $56.24. This wage rate is specific to the locality of the job. The wage rate is based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, collective bargaining agreements, and internal equity. Job responsibilities to include: Travels to various job locations within geographical assigned region (for General Construction). Reviews job work requirements and provides input regarding work for the day. Loads and unloads tools, materials and supplies into and out of vehicles at crew headquarters and job site. Lifts, pulls and carries insulators, cross-arms, equipment, tools, grounds, dampers, and other materials to and from job sites. Loads and unloads tools, materials, and equipment off of hand lines while standing on elevated structures that include: Wood poles and insulated work platforms. Climb poles using boot hooks or aerial lift. Tests, frames; sets and/or anchors poles; strings electric power lines and install cross-arms. Hangs and energizes transformers. Take voltage readings. Troubleshoots problems and determines extent of repairs on primary and secondary overhead or underground dead legs. Work will include the use of hand and power tools; digging holes by hand for pole installation; climbing ladders, poles, embankments and towers; working at heights above 35' on poles and in aerial lifts; setting grounds; working with live circuits; and working in trenches, manholes and confined spaces. Sets and installs underground structures, locates, pulls, removes, splices or terminates cables. Installs and replaces equipment, meters and streetlights. Operates hydraulic equipment including: drills, boom truck, digger, pole tamper, hydraulic jack and bucket truck once certified. Operates lift equipment such as aerial lifts and line truck booms. Operates forklift to load and unload work materials and supplies. Travels by vehicle, motor boat or off-road utility vehicle (OUV) to access job sites May drive a Class A vehicle (i.e. bucket truck and line truck) to and from the job site. May drive a company pickup truck or passenger vehicle to job sites and work locations, meetings and training and will may use vehicle to go to vendor locations and pick up or deliver supplies and materials. Conducts daily vehicle inspections Journeyworker Lineworker may provide back-up relief in temporary absence of foreman; direct work to other crewmembers and act as a leader. Must attend all mandated OSHA and company training. Provides on-the-job training, orientation, demonstration and assistance to apprentice lineworker. Qualifications to include: Completion of a federal or state sanctioned line worker apprenticeship with approved supporting documentation (e.g. IBEW Journeyworker Lineworker A Ticket) and/or union or union-affiliated sponsored line worker apprenticeship Must possessed a valid Class A driving permit by first day of employment Must have passed a DMV medical exam by first day of employment Must be at least 18 years of age High School diploma, GED or equivalent work experience Ability to wear company provided Personal Protective Equipment (PPE) Ability to lift and carry up to 100 pounds Ability to work and drive in all types of weather and road conditions Capable to work extended hours, nights, weekends and holidays If hired as Provisional, must complete the provisional training plan within one year from hire date. Successful candidates must pass the following pre-employment requirements prior to beginning employment: drug screen, background check, Post Offer Physical (POPA) Experienced in rubber gloving and hot stick procedures Experience in transmission and distribution work, underground and numerous voltages Effective team player with strong communication skills Pre-Employment Testing Post-Offer Physical Assessment Lineworkers (POPA) Journeyworker Assessment for Lineworker Progression (JALP) Benefits, Compensation & Workforce Diversity At FirstEnergy, employees are key to our success. We depend on their talents to meet the challenges of our changing business environment. We are committed to rewarding individual and team efforts through our total rewards philosophy which includes competitive pay plus incentive compensation, a company-sponsored pension plan, 401(k) savings plan with matching employer contribution, a choice of medical, prescription drug, dental, vision, and life insurance programs, as well as skills development training with tuition reimbursement. Please visit our website at *********************** to learn more about all of our employee rewards programs. FirstEnergy proudly supports workforce diversity. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, or status as a qualified individual with a disability. No recruiters or agencies without a previously signed contract. Unable to sponsor or transfer H-1B visas at this time. Safety Safety is a core value for FirstEnergy and is essential to all of our business activities. We ensure employees have the tools, information, and processes to perform their duties in a manner that assures safety for themselves, their co-workers, our customers and the public. Our goals are to provide a safe work environment, to maintain an accident-free, injury-free workplace, and to promote and maintain public safety. To meet these goals, we dedicate ourselves to achieving world-class safety standards. Position Classification Non-Bargaining FirstEnergy Human Resources Team

Production Worker Shifts: 1st (7am - 5pm) Pay: $22.55 MUST BE WILLING TO WORK OVERTIME IF NEEDED From a small family business to a multi-billion dollar global company, Sonoco has been changing the face of products and packaging since 1899 - all while keeping the heart of "People Build Businesses" alive. Our talented people are at the core of our growth, constantly reinventing the Sonoco wheel with brilliant solutions every year. Today we are a world leader in global packaging solutions with diversified operations in over 34 countries. We're extremely proud of our portfolio of brands, our achievements in sustainability and industrialization and the groundbreaking work accomplished by our people. While reporting to the shift supervisor you will work in production for our tube and core division and be responsible for working in a quick and safe manner. Excellent attendance is crucial for the team to achieve success. You must have a proven record of success in a fast-paced environment. You must have the ability to work with various teams and have a good eye to spot defects in the packing line. You will take pride in your personal hands-on and analytical abilities, organizational skills and attention to detail. What you'll be doing: * Collaborating closely with other departments and teams * Having the ability to think on your feet and troubleshoot problems and situations * Making incremental process adjustments, monitor and report quality of manufactured product * Learn to set up new jobs, train on other lines and in other departments * Maintaining a safe, clean and organized work area * Performing all duties as designated by supervisor/manager * Performing all duties in support of Sonoco's quality and safety policies * Helping out other departments as needed * Downtime is cleaning and straightening time We'd love to hear from you if: * You are Sonoco mission driven. * You have at least 1 year in a manufacturing/warehouse environment. * You have to have a "get it done" attitude and an urgency to resolve problems/tasks. * You can easily lift up to 50 lbs. as needed. * You have previously held a Forklift Certification and safely operate a forklift. * Working independently and managing multiple tasks simultaneously is needed. * You need to have working knowledge of our products and their quality requirements. * Being reliable, having good initiative, being committed, and being quality focused is a must. * Having the ability to effectively work with a team in a fast-paced environment is crucial to success. * You will need to have the ability to read and understand manufacturing instructions. * You will need to able to perform repetitive duties, including going up and down stairs and standing for long periods of time. * You will need to have the ability to work quickly while maintaining a high level of craftsmanship and attention to detail. At Sonoco Products Company, we offer a comprehensive total rewards package, including competitive pay and benefits. *Benefits listed below are for employees located in the U.S. Specific benefits and wellbeing programs may vary depending on your location (within the U.S. or global), or if you are a union employee. Benefits * Medical, dental, and vision coverage for you and your dependents, including FSA and HSA options * 401(k) retirement plan with company match * Wellbeing tools and resources to support holistic health, including an Employee Assistance Program with a variety of services * Paid time off and holidays to recreate, rejuvenate and care for the health of yourself and family * Variety of company paid and voluntary employee-paid insurance plans including life, personal accident, and disability insurance * Tuition reimbursement We are an equal opportunity employer, and we strictly prohibit and do not tolerate discrimination against employees, applicants or any other covered persons because of race, color, religion, national origin or ancestry, sex, pregnancy, sexual orientation, marital status, gender identity or expression, age, disability, genetic information, veteran status, or any legally protected characteristic.

Caruso is a family owned, 4th generation company that delivers fresh ready-to-eat, and pre-cut produce, sandwiches, salads, and fresh meal kits to retail distribution centers and direct-to-retail stores all over the USA and we are growing! Are you looking for extra income for the holidays? We are looking for seasonal 1st shift Production Line Workers to work Monday-Friday 6 AM-2:30PM for 3-4 weeks! Job Summary: The line worker will pack or package a variety of products by hand from a conveyor belt. Supervisory Responsibilities: None. Duties/Responsibilities: Counts, measures, and weighs products. Removes defective products or materials, placing them in specified areas for handling. Lines product on packaging material using hands. Examines containers, products, and materials for quality control and ensures packing requirements are met. Stacks boxes on pallets. Performs other related duties as assigned. Required Skills/Abilities: Ability to follow directions. Ability to assess products for quality compliance. Good time management skills. Basic understanding of principles and processes of customer service. Education and Experience: One year of general work experience preferred. Physical Requirements: Must be able to lift, push, pull, and carry objects. Must be able to lift up to 50 pounds at times.

Compensation: Starting wage is $20.45 per hour Schedule: Full Time About Aunt Millie's: Aunt Millie's, a popular family-owned bakery, has been celebrated for its commitment to quality and community since its inception. Renowned for producing a wide range of baked goods from breads to pastries, Aunt Millie's prides itself on using traditional recipes and fresh, locally sourced ingredients. This establishment not only offers a nostalgic embrace of home-style baking but also operates with a forward-thinking mindset towards sustainability and innovation in food production. Why Work Here: We are proud of the products we make and we're even more proud of how we make them. Aunt Millie's combines the best ingredients, recipes, and people to produce consistently high-quality breads and rolls that you will be proud to represent. We invest in good ingredients and good people alike, so that at Aunt Millie's you'll have more than a job, you'll have a career you can be proud of. Perks and Benefits: Standard benefit package may be offered depending on position. To be discussed during the interview. Position Summary: As a Production Worker, you will perform various tasks related to the manufacturing and production of bakery products. This role is essential in ensuring the efficient and high-quality production of bakery products at Aunt Millie's Bakeries. Essential Job Functions: Operating machinery and equipment used in the production process, such as mixers, ovens, and packaging machines. Weighing and measuring ingredients according to recipes and production schedules. Mixing, kneading, shaping, and baking dough to produce bread, rolls, and other baked goods. Monitoring the production process to ensure product quality and consistency. Performing quality checks on finished products to ensure they meet company standards. Packaging finished products for distribution, including labeling and sealing packages. Cleaning and maintaining work areas and equipment to ensure a safe and sanitary production environment. Following all safety protocols and procedures to prevent accidents and injuries. Communicating effectively with supervisors and team members to coordinate production activities and address any issues that arise.

. We are seeking a highly motivated 1st Shift Production Worker to join our team in the U-Bolt & Threaded Rod Manufacturing industry. As a Production Worker, you will be responsible for ensuring the efficient and timely production of high-quality products. You will work closely with the production team to meet daily production targets and ensure that all products meet our strict quality standards. This role requires a strong work ethic, attention to detail, and the ability to work in a fast-paced environment. Good attendance is important in this role. Resumes with inconsistent work history or frequent job movement (several jobs in less than a year or short periods at several jobs) will not be considered. Minimum Qualifications: Ability to lift up to 50 pounds Experience working in a manufacturing environment Strong attention to detail Ability to work in a fast-paced environment Ability & Knowledge for running and maintaining production machines and machine tools Mechanically inclined Experience operating production equipment Forklift certification Crane Operation Experience working in a lean manufacturing environment Experience with quality control processes Strong mechanical aptitude Use of calipers, micrometers and other measuring devices Some computer use is necessary Responsibilities: Operate and maintain production equipment Monitor production processes to ensure quality standards are met Perform quality checks on finished products Maintain a clean and safe work environment Collaborate with team members to meet production targets Skills: As a Production Worker, you will use your attention to detail and mechanical aptitude to operate and maintain production equipment. You will collaborate with team members to meet production targets and ensure that all products meet our strict quality standards. Your ability to work in a fast-paced environment and perform quality checks on finished products will be essential to your success in this role. Additionally, your experience with quality control processes and lean manufacturing will be beneficial in optimizing our production processes and improving efficiency. Some factors to consider in order to find the right fit in a workplace: This position stands for extended periods throughout the day, and includes some bending, stooping, scooting, crouching, extending and manual dexterity as well as assembling and disassembling machines for setup and changeover. This facility is not climate controlled. Employees do get dirty. Gray America Corp. and its subsidiaries are Equal Opportunity Employers M/F/D/V

**The Best Teams are Created and Maintained Here.** Looking for an opportunity where success comes naturally? Then you may have found your crew. We're looking for a **Snow Laborer** to join our team. **THIS ROLE IS A Part-Time; On-Call - AS NEEDED ROLE. MEANING YOU WILL NOT WORK UNLESS THE SNOW LEVELS REACH A POINT WHERE THE ALL-ROUND STAFF CANNOT HANDLE IT.** **_THE PAY RANGE FOR THIS ROLE IS $20 - $25 PER HOUR BASED UPON PREVIOUS RELEVANT WORK EXPERIENCE AND ANY CERTIFICATIONS / LICENSES YOU HOLD._** **Here's what you'd do:** Snow Tech you will be responsible for performing all tasks related to snow removal. Shifts are on-call and range from 6 to 12 hours and are often overnight depending on the storm event. May require longer hours for larger storms. The season starts on the first snow fall. **You'd be responsible for:** + Responsible for performing all tasks related to snow removal, including operating ATV plows, snow blowers, snow shovels and Salt spreaders. + Work with Sidewalk-Crew Leaders as a team to efficiently and safely complete each assignment **You might be a good fit if you have:** + 18 years of age or older + Work well under pressure while observing safety guidelines with minimal supervision + Have a smart phone (to download and use our attendance tracker App) + Have dependable transportation + You must be able to work on an On-Call basis; with 1-3 hours advanced notice and commit to reported when contacted by the Report time. + Able to lawfully work in the USA **Here's what to know about working here:** At BrightView, we're a tight-knit crew who are as passionate about caring for our clients as we are about each other. Though we're the nation's leading landscape company, we maintain a small company feel and supportive environment that makes our team members feel at home. If you're looking to join a crew of talented go-getters who tackle big vision projects other companies could only dream of, you might just have found your match. With our range of services, including landscape design, development, maintenance and enhancements, there's no limit to what we can do, and what you can achieve. In addition to industry-leading development opportunities, you'll also have benefits and perks like: + Competitive salary + The Opportunity to transition to the landscaping Maintenance teams in the Spring **Think you've found your crew?** _BrightView is an Equal Employment Opportunity and E-Verify Employer._ **Compensation Pay Range:** **_THE PAY RANGE FOR THIS ROLE IS $20 - $25 PER HOUR BASED UPON PREVIOUS RELEVANT WORK EXPERIENCE AND ANY CERTIFICATIONS / LICENSES YOU HOLD._** **_BrightView offers a suite or health, wellness, and financial benefits to full-time team members. Benefits offerings for full-time team members include medical, dental, and vision insurance, ancillary and voluntary products, a 401k savings plan with employer contributions, and 6 to 9 company paid holidays per year. Employees may also be eligible to receive paid time off for vacation and/or sick leave, tuition reimbursement, and/or potential variable pay opportunities based on position and performance. A detailed benefits package will be provided during the interview process_** _._ _It's Not Just a Team. It's One BrightView._

About the Role Position involves all aspects of the assembly processes including putting up inventory stock, parts pulling, assembling, repair/restock/warranty evaluations, testing and service, wash/prep/paint, packing, shipping /receiving and general clean up. The main focus of the position at this time is assembly of reducers and motors. Excellent mechanical aptitude and experience is required, including a background in hand assembly. Pay Range: $17.00/hourly + 10% Shift Differential Shift: 2nd Shift Top 5 skills and abilities we are seeking in an applicant: • Ability to perform all tasks listed above to the Company's expectations. • Must be currently eligible and authorized to work in the United States on an ongoing indefinite basis. • Ability to organize workload for timely accomplishment of work. • Must be able to occasionally sit, stand, walk, reach with hands and arms, push and pull, bend, twist, stoop, and kneel. • Must be able to continuously meet the Company's production requirements. Top 5 actual tasks for this position: • Hand assembly of gear motors, reducers, and adjustable drives, maintain parts stock between assembly lines, putting up inventory stock, parts pulling, repair/restock/warranty evaluations, testing and service, wash/prep/paint, packing, shipping/receiving and general clean up. • Use calipers, depth and paint millage gauges. • Must visually inspect all work and rework as necessary. • Must comply with all current ISO Quality and Work Instructions for job, all Company Safety rules, and all other Company rules, policies and procedures. • Assess each situation and do not perform any tasks which s/he feels is unsafe, on which s/he has not received training, or engage in any unsafe work practices. Report any unsafe condition to his/her manager. Although we have described above what we are generally looking for, we are very likely missing other attributes and skills that may make you a great fit! Please tell us about your other skills and abilities by applying and listing your additional attributes. A 10% shift premium is paid for 2nd and 3rd shift positions. SEW-EURODRIVE provides a generous benefits package to all full time employee. These benefits start on DAY ONE! There is no monthly premium required for Employee's coverage: • Medical Insurance - Includes Medical, Dental, Vision, Audio, and Prescription Drug coverage + $125 annual reimbursement for purchase of eligible vitamins & minerals • Life Insurance worth 2.5 times annual base pay. Includes Accidental Death & Dismemberment • Disability - Includes both Short Term Disability and Long Term Disability • Flexible Spending Account (FSA) for Medical and/or Dependent Care Made available annually during open enrollment • Timely Evaluations with potential for a pay increase - New Employees are evaluated every six months for the first two years then annually thereafter • Paid Vacation - 2-weeks of vacation accrual per year to start, which increases after five years and ten years of service • Holiday Pay - Twelve (12) paid holidays per year • Retirement Benefits - Includes 401(k) with Profit Sharing Contribution and 200% Company Match on the first 3% that you defer to your 401K account • Additional Paid Time Off (PTO) for hourly positions - Unused time is paid out annually • Paid Parental Leave - To assist and support new parents with balancing work and family matters • Onsite Clinic Services - On location medical services by licensed providers at no cost to employees • Education Assistance Programs - Student Loan Repayment / Tuition Assistance options • Counseling Resources - Easy and convenient access to professional counseling services online • Wellness Resources - Utilizing a comprehensive, interactive, and personalized wellness program with potential to earn points for awards / gift cards • Uniforms and Subsidies - Uniforms (for shop employees) are provided and a subsidy for the annual purchase of safety shoes is included • Employee Assistance Programs - Five programs to help employees navigate challenging life circumstances • Insure Choice Plan Group Discounts - Auto, Home, Pet coverage, Legal insurance, and more at a group discount rate Additional job requirements and responsibilities would be discussed during the interview process.

ABOUT US: Founded in 1972, FC Industries is a second-generation family-owned company that has long been recognized as a leader in metal manufacturing. At our Barsplice Products division, we specialize in creating high-quality parts used in some of the most recognizable construction and infrastructure projects across the country. Our products can be found in nearly every professional sports stadium in the U.S., including the Cincinnati Reds' stadium, and Bengals Stadium, as well as in landmark structures like New York's Freedom Tower. We're even part of exciting new developments such as the Buc-ee's in Huber Heights. From bridges to skyscrapers to community projects, the work you do here quite literally helps build America! What you'll do: As a Production Worker, you'll play a hands-on role in making the parts that drive America's infrastructure forward. Responsibilities as a Production Worker include: Operating and monitoring machines and equipment Assembling and fabricating parts Performing quality checks on finished products Reading and following job instructions and schedules Maintaining a safe, clean, and organized work area Working as part of a team to meet production goals Here are a Couple of Reasons why it is Great to Work at FC as a Production Worker: Weekly pay with competitive wages starting at $19.03 / hour for 2nd Shift (Pay negotiable with experience!) Family/team culture that values communication and growth Heating and Air Conditioning in the whole building, including the shop. 401k with company matching Attendance Bonus and profit sharing Medical, dental, and vision insurance Life insurance/ paid by the company Immediate PTO and paid holidays Pay for school with 100% tuition reimbursement (books included!) On-site perks: café/convenience store, wellness coaching, and YMCA discount Other Corporate partner discounts through Verizon, Chrysler, GM, and more! Fun company culture: giveaways, drawings, picnics, parties, and employee appreciation events Your Success is Our Success! Requirements What It Takes to Succeed as a Production Worker: We're looking for people who take pride in quality work and want to grow their careers in manufacturing - whether you're just getting started or bringing years of experience A team-player mindset with strong attention to safety and detail Willingness to learn and grow in a fast-paced environment Ability to read, write, and follow instructions Ability to lift, push, and pull up to 25 lbs. throughout the shift A commitment to contributing to our team's success and company growth Why Join Our 2nd Shift Team? Second shift isn't just another work schedule - it's an opportunity for stability, flexibility, and career advancement. Competitive pay: 10%-night shift differential Work-Life Balance You'll Appreciate: Enjoy a 4-day workweek, giving you an extra day a week to spend more time with family, friends, hobbies, or just life outside of work. More freedom during the day - perfect for family schedules, school, or reducing daycare costs Strong camaraderie: A tight-knit, focused team atmosphere Consistent Schedule: A steady 40-48 hours each week, with Fridays reserved only for occasional overtime when needed. Easier commute: Avoid heavy traffic with a later start at 4:30 PM If you're looking for consistent work, steady pay, and a company where people build careers - not just jobs - FC Industries is the place for you! PM21 #IN23 Salary Description $19.03 / hour (Negotiable with Experience)

We are hiring a Production Workers to join our team! You will operate basic machinery and basic equipment, as well as identify areas of improvement to increase efficiency. Training provided. Must pass background check and drug test. Openings on all three shifts. Responsibilities: Operate, maintain and clean manufacturing machinery and equipment Troubleshoot and repair any mechanical failures Complete work orders and requests in a timely fashion Perform routine preventative maintenance Adhere to safety policies and procedures Qualifications: Previous experience in production, manufacturing or other related fields Familiarity with schematics and technical drawings Familiarity with manufacturing machinery and equipment Ability to handle physical workload

Shifts: · First Shift: Monday - Friday (6:30 am to 3:00 pm) · Evening Shift: Monday - Friday (3:00 pm to 11:30 pm) . Overtime is required based on business needs and may become mandatory and weekends could be necessary.Must be available to work 7 days per week. Pay: 1st shift: $10.50 2nd shift: $10.75 Job Description · Standing for long periods of time. · May involve some repetitive motions - frequent bending, stooping, squatting, pushing, and pulling of parts and part containers. · Must be able to lift 50 lbs. · Due to the open environment of the warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity, and cold. · Understand and follow basic verbal and written instructions. · Effectively communicate information and respond to questions from various levels within the organization. · Maintain production pace of other team members. Additional Information If you are looking for a change and if you are interested in this job, you can contact me for more details. Direct Number- ************

**Production Worker Opening!!!** **Responsibilities** + Continuously check for print and seam quality. + Remove defective material and splice the roll web back together according to specifications. + Utilize a ruler, safety knife, and hole punch during the splicing procedure and as needed. + Handle rolls and palletize them accordingly to avoid damage. + Understand basic printing and seam-related defects. + Record and enter data on designated paperwork and in the company operation system. + Participate in special projects and perform other duties as assigned. **Why Work Here?** Enjoy working in a temperature-controlled warehouse, ensuring comfort across all shifts. **Job Type & Location** This is a Contract to Hire position based out of Batavia, OH. **Pay and Benefits** The pay range for this position is $18.00 - $19.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Batavia,OH. **Application Deadline** This position is anticipated to close on Dec 19, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Summary: Support plant production needs for daily operation, changeovers, and outbound shipments. Primarily responsible for assisting in the packaging of products for internal and external use, and assisting in changeover with other production teammates. Responsibilities: Performs all assignments in accordance with safety specifications, instructions, and requirements Demonstrates ability to meet production standards on specific assignments within the required time Maintains good housekeeping and clean work areas in assigned space Reports all production waste to the Production Lead or Supervisor Responsible for safety and quality throughout production Responsible for notifying a Production Lead or Supervisor when they step off the line to ensure safety and quality standards are maintained Performs other duties as required by Supervisor or Manager Follows all company policies and procedures Requirements High School diploma or equivalent Experience working in a Manufacturing Environment Ability to work in a fast-paced environment Understand plant safety guidelines and pass all required safety training Must be able to understand verbal and written instructions Troubleshoot problems and report issues Must work well in a team environment Physical Requirements Ability to be on feet up to 8-12 hours per shift Use of hands and fingers to perform job function Ability to stoop, kneel, bend and climb Ability to lift up to 55lbs

Part-Time Laborer - Streets Department The City of Wilmington is currently accepting applications for a part-time Laborer in the Streets Department. Working under direct supervision, this position assists with the maintenance and cleaning of City streets, sidewalks, curbs, gutters, storm drains, rights-of-way, and related structures. REQUIRED QUALIFICATIONS: Must be at least 18 years of age. Completion of secondary education or equivalent (high school diploma or GED); or any equivalent combination of education, experience, and training which provides the required knowledge, skills, and abilities. Must possess a valid State of Ohio driver's license and must remain insurable under the City's vehicle insurance plan. ESSENTIAL FUNCTIONS OF THE POSITION: Sweep, shovel, and remove debris from City streets, gutters, sidewalks, and rights-of-way Assist with leaf collection, mowing grass, trimming trees, and weed eating in public areas Participate in snow and ice removal operations Install, repair, and maintain street signs and signposts Make minor repairs to traffic lights, repair potholes, install raised traffic bars, guardrails, and reflectors Perform basic maintenance on equipment and vehicles, including cleaning and washing Adhere to all job safety requirements and applicable OSHA standards Demonstrate regular and reliable attendance Attend required trainings, meetings, or seminars as directed This position's starting salary is $17.31 per hour. The City of Wilmington is an equal opportunity employer. To request a reasonable accommodation to participate in the application process, please contact the City of Wilmington, Department of Human Resources, via email *******************. Please be prepared to provide information in support of your reasonable accommodation request.

Job Description Skills Must have ability to read tape measure, basic mathematic skills required. Lift up to 75 pounds occasionally to frequently Basic computer literacy. Ability to stay focused and on-task at all times. Loading Department Responsibilities Attend pre-shift meetings and give feedback Fill out crane logs daily. Locate and retrieve glass on the manifest that is missing from A frames or Harp Carts. Work with your loading crew to load glass on our truck by the manifest. (Last item loaded should be drivers first stop) Safely load trucks via hand, team lifting, or our overhead cranes. Properly and safely strap all glass to the trucks. Scan glass pieces to the digital manifest for the truck. Communicate issues with your supervisor IE (Need to walk off the line); and report any safety concerns or incidents. Wear safety gear on the floor at all times (kevlar pullover, helmet, glasses, pants, etc.). Operate and troubleshoot machinery in your department. Keep area clean and organized; Know where your exits and fire extinguishers are in your department. 6:30PM - 3:00AM

Job DescriptionSalary: $24.00 Advantic Building Group (ABG) is a design building firm that leverages industry leading technology to deploy advanced structural solutions utilizing fiber reinforced polymer materials alongside conventional material systems. Our culture and our people are our top priority. The Assembly Technician fabricates and assembles fiberglass structures according to blueprints and engineering specifications using standard carpentry tools and techniques to specified standards and level of craftsmanship. Key Responsibilities Reads and understands blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations, and setup requirements. Checks materials prior to fabrication to assure they meet specifications. Measures, marks, and scribes dimensions and reference points on material or work piece as guides for subsequent machining and fabrication. Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines, such as saws, drills, grinders, and shapers. Fabricates, assembles, builds and shapes materials to prescribed measurements and tolerances using cutting tools, drills, sanders, mixers and other process equipment. Verifies dimensions and trueness of assembly to specifications with precision measuring instruments. Completes process paperwork and documentation as required to include inventory, safety and quality documents. Selects specified materials and practices first in, first out inventory operations for perishable materials. May confer with engineers, production personnel, programmers, or others to resolve machining or assembly problems. Safely operates cutting and shaping equipment, power tools, hand tools and other process equipment. Assembles all tools, materials and consumables necessary to efficiently complete fabrication efforts. Solve mathematical problems quickly and accurately. Ensures proper care for and use of tools of the trade. Thorough understanding and execution of carpentry principles and methods. Qualifications High school diploma or GED or five to seven years related experience or training, or equivalent combination of education and experience. Carpentry certificate received from trade school preferred. Entry level with no experience to senior level with multiple years of work experience in carpentry or related trade. Physical Demands While performing the duties of this job, the employee is regularly required to communicate effectively through speaking and hearing. This role is physically active and requires the ability to stand, walk, reach with hands and arms, bend, kneel, stoop, crouch, crawl, and climb throughout the workday. The employee must frequently lift and/or move objects weighing up to 50 pounds. Specific visual abilities required for this position include: close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions of the job. Benefits An exciting work environment and the opportunity to change an industry Flexibility and responsibility Competitive wages Paid vacation & holidays Medical, dental, vision, short-term disability, long-term disability, and life insurance benefits 401k Paid parental leave policy Advantic Building Group is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability status, genetic information, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.

The successful candidate will perform molding operations in support of production contracts to include urethane materials. Employee will work independently and in a team environment under moderate guidance and in accordance with company policy and safety procedures to achieve productivity goals. The Machine Molding Operator performs a range of production tasks and operates a variety of production machinery. Ensures a safe work environment with an ultimate goal of zero accidents. Required Skills Job Core Responsibilities: Performs a range of production tasks such as operating subassembly equipment, coating equipment, ovens, material handling equipment including hoists, cranes, tow motors, pallet trucks, and other miscellaneous equipment. Prepare urethane machine for molding and demolding urethane parts. Conducts inspections of own work to insure correctness in accordance with company specifications. Applies process specifications governing the production of product within an assigned cell, records production time and quantity data. Maintains work area under company guidelines and participates in events as required. Completes troubleshooting while operating equipment, including performing and documenting limited preventative maintenance. Monitors, measures, and records quality assurance data including, but not limited to, operating process data, work orders and other specific process information. Moves material to enable the production process flows efficiently and effectively. Comprehends and accurately follows specific detailed operational instructions and prints for job and setup operations. Follows specific quality criteria to maintain quality system requirements. Observes safe work practices, maintains a safe and clean work environment, and wears the appropriate personal protective equipment. Regular, consistent, and punctual attendance is required. May need to overtime and weekends as necessary. Other responsibilities as assigned.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Our Troy, OH site location has an immediate need for a Brake Assembly Operator responsible for assembly of brakes and component parts of brakes while operating nut runners, drill presses, power screw drivers, grinders, electric hand drills, burr guns, riveters and other tools as necessary and testing of assembled brakes. 2nd Shift: Monday - Friday 3PM - 11PM What You Will Do * Receive job assignments, piece quantity, and special instructions from the supervisor. * Read standard operating procedures and operating sheets. * Clean, wipe, and sand parts as necessary. * Set torque wrenches and assemble brakes and their components. * Test brakes, rework brakes with leaks, and replace lee plugs as needed. * Stamp information on tags or pads and notify the supervisor of stock needs or machine problems. * Record transactions and quality data; report machine or process issues to the supervisor. * Check parts against the pick list and set up riveters as required. * Torque all applications as required. * Retrieve parts from the warehouse and store/retrieve brake components, maintaining current inventory records. * Prepare brakes and brake components for shipment, including packaging, counting, weighing, labeling, and completing paperwork. * Move materials between workstations and cells using hand trucks, hoists, or robot assistance. * Set aside discrepant parts. * Clean and maintain work areas, machines, auxiliary equipment, and common areas to ensure a clean, safe, and orderly environment. * Check and maintain operating levels of fluids and required machine materials. * Mask and plug parts as needed and touch up paint as required. * Attend training classes and cell meetings, and perform miscellaneous operations as assigned in support of Brake Assembly. * You will be required to perform mathematical calculations requiring addition, subtraction, multiplication or division and pass a pre-employment qualification test. * You will be required to perform substantial reaching and moving while standing, twisting; stooping; and be response to sounds associated to the work environment. * You will be required to lift to 25 lbs. unassisted, anything over 25 lbs. would be assisted. * You will be required to wear personal protective equipment as required. * You will be required to adhere to all EH&S roles and responsibilities as stated in manufacturing work instructions and EHS policies and procedures. Qualifications You Must Have * HS Diploma. In the absence of a HS diploma or GED, 2 years of relevant experience is required. * U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract * Minimum of 1 year CNC machining experience or minimum of 2 years manufacturing experience. * Experience working with technical documents (including any of the following: routings, blueprints, Engineering process specifications, written work instructions.) What We Offer Some of our competitive benefits package includes: * Medical, dental, and vision insurance * Paid time off after 121 days * Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option * Tuition reimbursement program * Student Loan Repayment Program * Life insurance and disability coverage * Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection * Birth, adoption, leave benefits * Ovia Health, fertility, and family planning * Adoption Assistance * Autism Benefit * Employee Assistance Plan, including up to 10 free counseling sessions * Healthy You Incentives, wellness rewards program * Doctor on Demand, virtual doctor visits * Bright Horizons, child and elder care services * Teladoc Medical Experts, second opinion program * And more! Learn More & Apply Now! Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! * Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40. (Confirm Safety Sensitive Role) At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Our Troy, OH site location has an immediate need for a Wheel Paint and Assembly Operator. In this role you will assemble parts and operate robotic paint equipment to paint wheels and brakes, and their components. 2nd Shift: Monday - Friday 3P - 11P What You Will Do Receive job assignments from the supervisor or job assignment book. Read and understand operating procedures, blueprints, engineering change notices (ECNs), and quality specifications. Operate and set up Tocco's and balancers, including cup presses, balancers, stamping, and washer operations. Hang wheels onto the automated paint system and prepare them for priming and top coating. Demask and unload wheels; determine and use proper tooling and masking. Operate automated lift/tilt tables and HMI screens for part numbers, shop orders, recipe entries, and NADCAP data collection. Maintain and troubleshoot robotic paint systems, including fluid delivery components like regulators, guns, lines, valves, and pumps. Assess paint quality according to requirements. Complete wheel assembly tasks including hardware installation, torque application, bearing lubrication, stamping, and touch-up painting. Conduct in-process inspections and ensure traceability through proper documentation (e.g., run-out, SPC). Prepare wheels for inspection, perform riveter operations, and handle packaging, counting, weighing, and labeling for shipment. Manually prime and paint, mix paint to specified viscosity, and maintain manual spray guns and pots. Fill out NADCAP data forms and label documentation. Maintain a clean and safe work environment, address quality concerns immediately. Retrieve items from the tool crib and complete necessary forms/transactions. You will be required to perform mathematical calculations requiring addition, subtraction, multiplication or division and pass a pre-employment qualification test. You will be required to pass a vision assessment once per year, including an initial normal color vision test prior to employment. You will be required to perform substantial reaching and moving while standing, twisting; stooping; and be response to sounds associated to the work environment. You will be required to lift to 25 lbs. unassisted, anything over 25 lbs. would be assisted. You will be required to wear personal protective equipment as required. You will be required to adhere to all EH&S roles and responsibilities as stated in manufacturing work instructions and EHS policies and procedures. Qualifications You Must Have Typically requires a HS Diploma or GED Minimum of 1 year CNC machining experience or minimum of 2 years manufacturing experience. Experience working with technical documents (including any of the following: routings, blueprints, Engineering process specifications, written work instructions.) What We Offer Some of our competitive benefits package includes: Medical, dental, and vision insurance Paid time off after 121 days Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option Tuition reimbursement program Student Loan Repayment Program Life insurance and disability coverage Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection Birth, adoption, leave benefits Ovia Health, fertility, and family planning Adoption Assistance Autism Benefit Employee Assistance Plan, including up to 10 free counseling sessions Healthy You Incentives, wellness rewards program Doctor on Demand, virtual doctor visits Bright Horizons, child and elder care services Teladoc Medical Experts, second opinion program And more! Learn More & Apply Now! Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Responsible for performing a variety of tasks associated with prepping, pouring, placing, and finishing of concrete. Tasks include assisting carpenters and finishers in daily tasks which include, but are not limited to the following: erecting and setting forms and scaffolding; loading and unloading equipment; placing and finishing of concrete; transporting equipment, materials, and supplies; and ensuring a safe and clean job-site.