Line up worker jobs in Peabody, MA

The City of Dover Community Services Department is seeking three Laborers (or Truck Drivers depending on qualifications) to perform perform a variety of routine unskilled and semi-skilled manual labor duties involving the construction and maintenance of highways, sidewalks, and storm drainage projects. This is a full-time, 40 hour per week position. $19.68 to $28.44 per hour. Position is open until filled. DUTIES AND RESPONSIBILITIES (Except as specifically noted, the following functions are considered essential to this position. The listed examples may not include all duties found in this class): 1. Perform required labor involved in construction and maintenance projects as part of a crew, including pavement cutting, ditch digging, manhole and line cleaning, main and pipe repair, laying and backfilling, raising old manhole covers and catch basins to road level for street reconstruction. 2. Perform general heavy laboring duties in assisting skilled and semi-skilled workers to remove trees, mix and pour cement, lay asphalt, patch streets, install and repair water and sewer lines, clear culverts, drains, roads and ditches, maintain park facilities, mow grass, clear weeds and brush, rake and pack leaves and debris, etc. 3. Provide assistance with operation of jet truck, camera truck and other light and medium-sized construction and power equipment 4. Provide assistance with snow removal operations, either operating small trucks or sidewalk plows, or may serve as a wingman on plow. Attach and remove snow plows, sanders, and associated equipment from vehicles. 5. Assists in other activities to mitigate conditions caused by extreme weather conditions, and natural and man-made disasters. 6. Operate and perform maintenance on hand tools and other machinery which may include, but not be limited to, mowers, brush cutters, chainsaws, weed whackers, etc. 7. Occasionally performs traffic control functions at job sites. 8. Operate trucks and motorized equipment as necessary. 9. Maintain effective working relationships with other employees and the public. 10. Available 24 hours per day to meet emergency situations as required. 11. Familiar with and executes safe work procedures associated with assigned work. 12. Performs other related duties as required. KNOWLEDGE, SKILL AND ABILITY REQUIREMENTS: Basic knowledge of and the ability to use simple hand and power tools. Ability to perform simple and routine manual labor and perform one routine job for a prolonged period. Sufficient physical strength, conditioning and agility to perform strenuous manual labor for extended periods of time under adverse and varying weather and climatic conditions. EDUCATION/LICENSURE/CERTIFICATION REQUIREMENTS: High school diploma or equivalent, and one year's experience in construction, road maintenance or trade work, or and equivalent combination of education and experience which demonstrates possession of the knowledge, skills and abilities required for the position. Valid Operator's license required, CDL-B license with air brake and tanker endorsement preferred.

Job Title: Associate Production/Assembly Worker - 2nd shift Company: Munters About Us: Munters is a global leader in climate solutions for mission-critical processes. We offer innovative, efficient and sustainable solutions for customers in industries where controlling indoor humidity, temperature and energy efficiency is mission-critical. Climate control systems often account for a large percentage of the energy consumption in many of our customers' operations. With an optimal climate system, we can help them to more efficiently use energy or water resources, and thereby reduce their climate and environmental impact. Sustainability is an important part of Munters' business strategy and value creation. We pride ourselves on fostering a dynamic and inclusive work environment where interns are valued members of the team and are given meaningful projects to work on. Hours: Monday-Thursday from 4:00 PM to 2:30 AM Job Summary: To finish and package product for shipment. Also provide final quality control for finished products. Essential Functions: Grind welds as required Fill required areas with fiberglass resin Touch-up paint as required Package finished goods and label as required Complete quality control paperwork as required Clean and maintain work area on a daily basis Other tasks as assigned by a team lead or supervisor PHYSICAL REQUIREMENTS: Frequently stand, walk, bend, crouch, kneel, climb, maneuver, stoop, squat, grasp, reach and carry, or otherwise move objects exerting up to 75 pounds force Daily walking, stooping, kneeling, crouching, reaching, standing for sustained periods of time, walking, pushing, pulling, and lifting. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; expansive reading; visual inspection involving small defects, small parts and/or operation of machines; using measurement devices; and/or assembly of fabrication of parts at distances close to the eyes. Job Qualifications H.S. diploma or equivalent preferred. Benefits: Competitive salary Comprehensive health, dental, and vision insurance plans. Generous vacation and paid time off. 401(k) retirement savings plan with employer matching. Professional development opportunities, including tuition reimbursement and conference attendance. Company-sponsored social events and team-building activities. State-of-the-art equipment and tools to support your work. Equal Opportunity Employer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All offers are contingent on a pre-employment drug test, background check, and physical as applicable for the position. #HPMUNTERS

Job Description Job Title: Production Worker - Level I Pay Rate: $19.00/hour Shift: 1st Shift | [Insert hours, e.g., 6:00 AM - 2:30 PM] Schedule: Monday - Friday We are seeking a dependable and hardworking Production Worker Level I to assist with daily processing of customer orders. This entry-level role involves basic production, packaging, and warehouse tasks. Training is provided. Key Responsibilities: Prepare the production and loading areas for daily operations Use an electric pallet jack to move, stack, load, and unload products Make boxes and handle packaging materials Weigh, count, or scale products for customer orders Pack and label items according to order requirements Handle and distribute ice for storing temperature-sensitive products Clean processing areas and dispose of waste properly Monitor inventory supplies and ice machine as needed Follow safety protocols and procedures Perform other duties as assigned Qualifications: Basic understanding of warehouse or production tasks Ability to lift up to 100 lbs occasionally and 50 lbs frequently Able to work in cold environments (super freezer at -70°ree;F) Comfortable standing, bending, and lifting throughout the shift Able to operate electric pallet jacks and basic equipment (training provided) Reliable and punctual with a strong work ethic Work Environment: Cold storage and production areas May work in slippery or wet conditions Physically demanding role with heavy lifting and repetitive tasks Team-based environment with a focus on quality and efficiency Powered by JazzHR zm7647TPCd

Job Description World Insurance Associates is a unique insurance organization offering top products and services from major providers, combined with attentive service from local agents. Founded in 2011, World is one of the fastest-growing insurance brokers in the U.S. with over 2,200 employees in over 260 offices across North America. We specialize in personal and commercial insurance lines, surety and bonding, employee benefits, financial and retirement services, and human capital management solutions. Our rapid growth and market leading presence has created opportunities throughout the state and we offer top talent the choice to work from one of our multiple offices throughout the region. Position Overview The Commercial Lines Account Manager will play an integral role in driving our mission to deliver excellence in client management and retention. Primary Responsibilities Effectively managing a high volume book of Insurance business, ensuring all required tasks are completed accurately and on-time Growing client loyalty by building positive relationships and providing high levels of advocacy, excellent service, and professional communication Handling renewals, service requests, claims, billing and new policies Maintain a thorough understanding of the markets and their appetites, underwriting guidelines, submitting and procedures Review all applications, policies, endorsements and audits for accuracy Coordinate expiration list with department manager to obtain renewal business information Qualifications Bachelor's degree or equivalent work experience, preferred Three years minimum Commercial Account Management experience required Property & Casualty License required Valid driver's license and insurance, required Possess strong administrative and computing skills, including Microsoft Office (Word, Excel and Power Point) Applied/Epic or similar agency management software experience, preferred. Able to work independently and enjoy a high degree of interaction with team members. Self-motivated and driven. Maintain a sense of urgency and ability to work with and meet deadlines. Demonstrate effective written and verbal communication, including the ability to actively listen, and problem solve with minimal assistance. The ability to multi task, prioritize, work independently, and use discretion surrounding sensitive information. Ability to maintain a professional demeanor and positive attitude Equal Employment Opportunity At World Insurance Associates (WIA), we celebrate and support our differences. We know employing a team rich in diverse thoughts, experiences, and opinions allows our employees, our products, and our community to flourish. WIA is honored to be an equal opportunity workplace. We are dedicated to equal employment opportunities regardless of race, color, ancestry, religion, sex, national orientation, age, citizenship, marital status, disability, gender identity, sexual orientation, or Veteran status. In addition, WIA makes reasonable accommodations to known physical or mental limitations of an otherwise qualified applicant or employee with a disability, unless the accommodation would impose an undue hardship on the operation of our business. TO EXECUTIVE SEARCH FIRMS AND STAFFING AGENCIES: World does not accept unsolicited resumes from any agencies that have not signed a mutual service agreement. All unsolicited resumes will be considered World's property, and World will not be obligated to pay a referral fee. This includes resumes submitted directly to Hiring Managers without contacting World's Human Resources Talent Department. #LI-KS1 Powered by JazzHR 5VaxkaTUWX

Who we are: Callahan Construction Managers is a full-service construction management company based in Bridgewater MA, with regional offices in White Plains, NY. Callahan has served the New England and Northeast regions as a family business for over 70 years. As one of the region's largest open shop construction firms, Callahan provides a wide range of preconstruction and construction management services to local, regional, and national clients. Callahan enforces a high quality and innovative approach to all projects, including multi-family residential, senior housing, affordable housing, hospitality, life sciences, corporate office, educational, retail and other markets. Visit ******************** for more information. Callahan has the unique ability to self-perform work. This division is responsible for self-performing the entire General Conditions package. Controlling this scope of work allows us to provide support, control, leverage, and value opportunities, while proactively addressing issues that could impact budget and schedule. Summary/objective: Seeking a Laborer to join our growing team. Ideal candidates must have a strong work ethic and an ability to follow directions. Scopes of work include, but not limited to: General cleaning and housekeeping Field office/trailer fit out Temporary protection Temporary containment Trash out service Select demolition Safety railing and toe boards Job-built stairs and ladders Trash chutes Signage installation Traffic control and site logistics Water mitigation Winter tarping and temp enclosures Snow and ice management Temporary heat management and fueling Emergency response Punchlist Essential functions: Loading and unloading of materials, tools, and equipment Removing debris, garbage, and materials from sites Assembling and breaking down barricades, temporary structures, and scaffolding Assisting contractors, e.g. electricians and painters, as required Following all health and safety regulations Qualifications: High school diploma preferred Construction work experience preferred Reliable transportation Report to work on time Must be able to lift 50 Lbs All qualified applicants will be afforded equal opportunity. There shall be no discrimination based on race, color religion, sex, sexual orientation, gender identity, national original or on an applicant's status as a protected veteran or as individual with a disability.

Title: Entry Level Production Worker (Sandblast) Type of Placement: Temp to hire Shift: Mon-Friday 7:30AM - 4PM Pay/Pay Range: $18-20/hr About Our Customer: Well established manufacturer in Londonderry, NH. Our client takes pride in providing a work atmosphere that is a relatively low key and temperature-controlled environment. They are an AS9100D & ISO 9001 certified company. Benefits upon Hired Perm: Medical (Company pays 70%) Dental 401K Two weeks off each July Summary: We are currently seeking a dedicated and skilled individual to join our team as an entry level Production Worker. In this role, you will be responsible for the critical process of surface cleaning cast aluminum parts for inspection. It involves using compressed air to propel abrasive material at a surface under high pressure (60 psi) in an enclosed cabinet. ESSENTIAL FUNCTIONS: Utilize high-pressure compressed air to clean cast parts to prepare for inspection. Follow established procedures and guidelines to ensure safe and efficient operation of tools and equipment. Inspect parts for defects or irregularities. Work independently to prioritize tasks and manage workload to meet production deadlines. Maintain a clean and organized work area to ensure safety and efficiency. Communicate any issues or concerns regarding equipment or materials to the supervisor. Adhere to all safety protocols and guidelines to minimize the risk of accidents or injuries. Participate in training programs to enhance skills and knowledge related to sandblast techniques. EDUCATION and/or EXPERIENCE: High school diploma or equivalent. Previous experience in a manufacturing or industrial environment, preferably in a role involving metal casting or fabrication, but not required. Strong attention to detail and ability to identify defects or irregularities in parts. Physical strength and endurance to lift and handle parts weighing up to 50 pounds routinely. Good communication skills and the ability to work independently. Willingness to work in a fast-paced environment and adapt to changing priorities. Ability to follow both written and verbal directions. Manual dexterity and good eye coordination is necessary. About Wicked Staffing Solutions: We have built long-standing relationships with some of the most reputable and well-known top companies that are hiring in manufacturing, distribution, customer service, engineering, electronics and many other industries. We offer temporary, temp-hire and direct placement opportunities, in a variety of positions. Equal Opportunity Employer

The Panther Group has an immediate need for a Sr. Assembly Operator in Westborough, MA. This is a contract to hire opportunity. The Sr. Assembly Operator will be primarily responsible for assembling complex medical devices for projects in Phase 3 (Design Verification) and Phase 4 (Clinicals). Work under the guidance of project engineers and technicians in meeting quality specifications on NPI phase projects. Assist project team in transitioning Design and Development projects to production in a small team and collaborative environment. Responsibilities: Efficiently, Effectively, and consistently assemble and package complex medical devices. Produce product with minimal scrap and minimal to no engineering rework. Demonstrate improved efficiency over the life cycle of a build. Apply on the job learnings to decrease training length and improve throughput. Accurately and promptly fill out quality assurance records. Ability to identify non-conforming and/or reject assemblies and communicate source of issues to project team. Conduct incoming, in process and final inspection of components, assemblies and finished goods. Assist in inventory management with tasks such as kitting and cleaning of components. Maintain a clean and organized workstation during project builds. Enforce and abide by Controlled Environment Room (CER) procedures and best practices. Complete tasks that support the upkeep and maintenance of the CER and NPI department. Other duties as assigned. Required Qualifications: High School diploma or Equivalent and at least 2 years of experience. Ability to adapt quickly and positively to changing priorities and processes. Ability to support a wide range of manufacturing tasks with some repetition and varying complexity. Ability to work under minimal supervision. Ability to effectively use basic measurement tools including but not limited to rulers, calipers, micrometers, and pin gauges. Ability to effectively use basic hand tools and cutting instruments including but not limited to microscopes and standard razor blades. Ability to read, comprehend and follow complex manufacturing work instructions. Preferred Qualifications: Experience in the medical device manufacturing industry. Experience with laser welding processes and techniques. Experience with catheter processing equipment including hot boxes, laminators, split die bonders and tipping machines. Experience working in a Controlled Environment Room (CER). Familiarity with ISO Quality Systems particularly in medical device development and manufacturing. Ability to read and understand engineering drawings. Ability to create job related records for quality purposes. Pay is $23/ hour #INDENG

Job Description Qualifications: 1-3 Years work experience in a manufacturing environment preferred. Qualifications: High School Diploma or equivalent (GED) is preferred, not required Mathematical and measuring skills 1-3 years of experience in a manufacturing environment preferred The ability to read, write and follow verbal and written instructions in the English language The ability to read and understand work orders and product specifications Physical Coordination, as well as the ability to lift up to a maximum of 35 pounds. The ability to work with cleaning solutions such as Isopropyl Alcohol is required. Ability to work in a respectful way in a collaborative environment. Physical demands: Vision - important if color distinction, visual inspection, measuring/assembling at distance close to eye is essential to job. Reading and Writing - Expressing or receiving detailed information by nonverbal means. Climb/Balance - important if the amount and kind of climbing or balancing required exceeds that required for ordinary locomotion. Bend/Stoop/Kneel/Crouch/Crawl -important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles. Standing/Walking: Particularly for sustained periods of time. Sitting: Particularly for sustained periods of time. Finger/Grasp/Handle/Feel: Working, primarily with fingers. Talk/Hear: Expressing or receiving detailed information by means of the spoken word. Repetitive Motions: Substantial movement of the wrists, hands, and/or fingers. Typical weight lifting requirements up to 35 pounds. Rarely work in extreme temperatures. Working conditions rarely but may include: ventilation conditions (dust, fumes, dirt, chemicals, gases, smoke), confined areas, equipment in motion, noise level, poor lighting conditions, exposure to hazardous materials or jarring and vibrations. Safety equipment and clothing is required. Responsibilities: 3rd Shift: 11PM - 7:30AM - Sunday PM - Friday AM To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Job Summary To assemble product by paying close attention to work orders and customers specifications and utilizing all safety rules and procedures at maximum efficiency, with minimum scrap to achieve an acceptable product while following quality guidelines and specifications. Job Responsibilities: Follows the proper steps to achieve an acceptable product while following quality specifications and guidelines, in a safe working environment. Responsible for accurate record keeping as per supervisor / lead persons direction. Follows and understands GMPs (Good Manufacturing Practice) and OP.s (Operating Procedures) as it pertains to their responsibilities. Complete all required paper work correctly. Report all necessary and correct information per operation in activity. Utilizes documentation such as the Bill of Materials (Work Order Routing) product specification, drawings and company equipment (Rulers, Toppi Chart, Go No Go Gauge) to achieve an acceptable product. Set-up Branding equipment and brand coils per specification. Load, unload and program post cure ovens with correct cycle as per specification. Operate Spooling equipment per specification. Clean and package all products including molded products. Set-up and operate tube rinsing equipment. Assemble pump sets per specification. Meet all Quantity and Good Manufacturing Practice to satisfy customer requirements, performs other duties as assigned and keeps the work area clean. Must abide by the Workplace Safety Guidelines and Company Policies use the all necessary personal protective equipment required.

Appleseed Personnel is a full service staffing firm in Leominster with over 40 years of experience is matching quality people with quality jobs. Our client in Leominster is currently seeking a Production worker for their facility in Leominster. This first shift position involves the following duties: Operate various compounding lines Pull and blend raw materials for processing Package finished product Operate rider-type industrial forklift (will train if needed) Track inventory movement If you are interested in joining a company with excellent benefits upon hire, we may have the perfect job for you! Hours: Monday-Thursday 7:00AM-5:00PM and Friday 7:00AM-4:00PM. Apply Online Today!

The Production Worker is responsible for performing all tasks involved in the production of the company's products. The individual in this position follows standard work methods and practices safe work habits to ensure production is as efficient and safe as possible. ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential function. Perform work on production line; run equipment and inspect, stack, separate, count, and pack product. Conduct quality checks and properly record information. Monitor machinery and equipment operation to ensure all product meets performance specifications and requirements. Promptly notify supervisor of any quality or production issue. Assist with changeovers. Maintain good housekeeping and regularly clean work area, machines, and equipment. Identify and contribute to continuous improvement efforts to reduce costs or increase productivity without reducing effectiveness. Maintain an open and candid working relationship with immediate supervisor/manager in discussing matters of importance. Adhere to established company values, practices, policies and procedures at all times. Follow and support compliance with all applicable safety rules, laws, regulations, and standards. Demonstrate regular and punctual attendance at the assigned work location. This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned MARGINAL FUNCTIONS The individual may be asked to perform other duties as requested. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES An individual qualified for this job must be able to: Keep up with machine production rates. Accurately multiply, divide, add, and subtract whole numbers to resolve practical problems. Operate a computer PC proficiency; use spreadsheets and reporting software effectively. Wear/use required PPE (personal protective equipment). Understand written instruction and complete appropriate documentation as directed. Use a logical approach to troubleshooting issues and prioritizing production needs. Recognize problems when they occur and to work toward the solution of those problems. Pay attention to details and pursue quality in accomplishing work duties and tasks. Look for opportunities to reduce costs or increase productivity without reducing effectiveness. Handle challenges skillfully, thoroughly, and effectively. Effectively and professionally communicate with co-workers, team members, and internal or external customers. Present information clearly and accurately. Independently take advantage of opportunities to improve or increase skills, abilities and job knowledge. Make sure that work is delivered on time and of high quality. Develop good work practices in order to get the job done. Use equipment, resources and time in an efficient and effective manner. Use good judgment when making decisions. Perform work in a safe manner at all times. Work in a cooperative manner with management, co-workers, internal/external customers, and vendors. Do the right thing, even when it is difficult. MINIMUM EXPERIENCE, EDUCATION, AND CERTIFICATIONS Entry level position (0 to 2 years experience). Must be able to obtain forklift license through Highline Warren. PHYSICAL DEMANDS OF ESSENTIAL FUNCTIONS The physical demands described here are representative of those that must be met by an individual to successfully perform the Essential Functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Remain in a stationary position when performing line operations. Regularly move about when moving along the line as needed to perform job duties. Transport products and materials weighing up to 58 pounds when moving products to the line and or emptying boxes to the load area. Manipulate products on pallets, using force of up to 35 pounds. Position oneself to retrieve products or materials from ground level. Reach forward and overhead when inspecting product and moving pallets. Ascend/descend stairs/ladders to access the machine, catwalk, and when climbing over machinery/line. Position and handle product, boxes, and pallets. Perceive the nature of sounds and have the ability to exchange detailed information while performing job duties in a manufacturing plant where noise level is moderate to high. Move about the manufacturing facility to observe and effectively communicate with team members and perform job duties. ENVIRONMENTAL CONDITIONS The environmental conditions described here are representative of those the associate encounters while performing the Essential Functions of the job. The individual in this position will be expected to work in a manufacturing plant environment, which may include being exposed to work in high/precarious places, moving machinery, marked changes in temperature and humidity, and dust, odors and fumes. Typical noise level is loud.

**Roles and Responsibilities:** JOB TASKS MAY INCLUDE + Setting-up and operating inspection and/or manufacturing tools/equipment such as conventional electrical discharge machines, grinders, precision assembly devices, peen machines, TIG-tack welder, heat treat, plasma spray, etc. + Performing basic mathematical calculations + Using precision gages/fixtures and inspection measuring equipment and interpreting mechanical blueprints, sketches, engineering specifications and drawings, etc., to determine set-ups and operations necessary to complete job tasks. + Training duties. + Performing related environmental, health, safety, maintenance, quality, continuous improvement, and production-flow job duties to support plant machinery, equipment, and manufacturing-related initiatives and programs. + Maintaining detailed job task documentation, reports, and records. MINIMUM QUALIFICATIONS: + High school diploma/GED with a minimum of 1-year of experience in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering; Or + Bachelor's degree, Associate's degree or Technical certificate from an accredited university or college in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering. DESIRABLE QUALIFICATIONS + Set-up and operation of machine/manufacturing tools and equipment. + Reading and interpreting mechanical blueprints, drawings, engineering specifications, etc. + Performing basic mathematical calculations. + Use of manufacturing/machine tool measuring equipment and gages. + Lean Six Sigma fundamentals. + EH&S processes and procedures. + Oral and written communication skills. + Demonstrated ability in maintaining relationships by recognizing needs and sensitivities of others, and cooperating and resolving conflicts that inspire the Team in achieving objectives and deliverables. + Demonstrated ability in receiving guidance and supervision, following work rules, safety practices, work procedures; meeting deadlines; and punctuality and attendance standards. _This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Presser should have the ability to work in a fast-paced environment and have attention to detail. This position will work on the production floor and be trained to operate the robotics and computer system. Company is willing to train a hard working, reliable and honest individual. We offer great benefits, growth potential & training. Benefits include Health Insurance, paid vacation, sick and holidays, 401(k) with matching 3%, employee discount. Starting pay is $16+ based on performance and experience.

The Senior Production Assembler is responsible for performing complex mechanical and/or electromechanical assembly tasks with a high level of precision and minimal supervision. This role also provides guidance, training, and support to other assemblers and helps ensure production goals, quality standards, and safety requirements are consistently met. Minimum Qualifications Education: High School Diploma or Equivalent Advanced training in J-STD-001/IPC-620 standards Experience: 7+ years of experience in mechanical, electromechanical, or related assembly work. Experience in a manufacturing environment within aerospace, defense, medical, or electronics industries. Knowledge: Working knowledge of basic assembly procedures. Previous knowledge of cable and wire harness assembly required. Skills: Strong ability to read and interpret engineering drawings, schematics, and work instructions. High proficiency with hand tools, measurement devices, and assembly equipment. Excellent attention to detail with strong quality-focused mindset. Ability to work independently with minimal supervision. Strong communication skills and ability to mentor others. Familiarity with ISO 9001 or AS9100 quality systems. Basic computer skills (ERP usage, data entry, documentation). Job Responsibilities Perform complex and detailed mechanical, electromechanical, and/or sub-assembly operations following engineering drawings, work instructions, and production travelers. Assemble components using hand tools, power tools, soldering equipment, and measurement devices as required. Inspect parts and completed assemblies to ensure adherence to quality standards. Troubleshoot assembly issues and assist in resolving nonconformances. Train and mentor junior assemblers; provide technical support to the production team. Maintain accurate documentation, including production logs, inspection results, and material usage. Work closely with Engineering, Quality, and Production teams to streamline processes and improve workflow. Follow all safety protocols and contribute to a clean, organized work environment. Assist with inventory management, including material pulls, cycle counts, and verification of part numbers. Support continuous improvement, lean manufacturing initiatives, and process enhancements. Attend required trainings for program specific requirements. Internal and External Relationships This position interacts with production, quality, and engineering departments on a regular basis Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit or stand as needed. This position requires the ability to lift up to ten (10) lbs. The noise level in the work environment is usually quiet. About 603 Manufacturing Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule. 603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

Job Description Charger Water Treatment is seeking an enthusiastic Production Assembly to join our dynamic team in Nashua, New Hampshire from December to April. In this role, you will be instrumental in the smooth operation of our warehouse, ensuring products are received, sorted, assembled, and shipped efficiently. If you are a team player who enjoys working in a fast-paced environment, we want to hear from you! Key Responsibilities: Receive and accurately record deliveries of water treatment products. Inspect incoming shipments for damages and discrepancies. Organize and store products in their designated locations. Pick, pack, and assemble outgoing orders for shipment. Maintain accurate inventory counts and assist with cycle counts. Operate warehouse machinery in compliance with safety protocols. Ensure a clean, safe, and organized work environment. Collaborate closely with team members to meet deadlines. Requirements High school diploma or equivalent preferred. Previous experience in a warehouse or distribution role is a plus. Ability to lift heavy items (up to 50 lbs) and perform physical tasks throughout the shift. Strong attention to detail and organizational skills. Good communication skills and a positive attitude. Basic computer skills for inventory management. December - April, Full-time availability: Monday to Friday, 7:30 am - 4:30 pm. Benefits $18 / hour When being a part of the Charger Water Treatment Products team you can expect a company culture that strives to encourage personal growth and a secure working environment. Charger Water Treatment is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Charger Water is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Charger Water are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. We encourage applicants of all ages/genders to apply.

Job Description Key Responsibilities: Assemble Ready-to-Assemble (RTA) kitchen cabinets using power tools and hand tools, following detailed instructions to ensure accuracy. Use power drills, screwdrivers, hammers, and other tools to complete tasks. Always follow safety procedures and guidelines. Maintain a clean and organized workspace. Perform additional tasks as assigned. Qualifications: High School Diploma or equivalent required. Ability to stand for the entire shift with frequent bending, twisting, and lifting. Must be able to regularly lift up to 50 lbs. and perform team lifts for items over 51 lbs. Competencies: Problem Solving: Identifies issues and develops solutions in a timely manner. Project Management: Coordinates and completes projects on schedule. Technical Skills: Continuously builds skills and shares expertise. Interpersonal Skills: Focuses on conflict resolution and open communication. Oral Communication: Communicates effectively Teamwork: Balances individual and team responsibilities. Quality Management: Ensures accuracy and thoroughness in work. Ethics: Treats all individuals with respect. Judgment: Makes timely, sound decisions and involves others as needed. Quality/Quantity: Maintains productivity standards and works efficiently. Safety and Security: Observes safety guidelines and reports unsafe conditions. Adaptability: Manages changes, delays, and unexpected events. Attendance/Punctuality: Consistently on time and reliable. Dependability: Follows instructions and maintains commitments. Physical Demands: Standing, walking, bending, kneeling, and finger dexterity are required continually. Frequently lifts or pushes items over 50 lbs. Occasional exposure to humid conditions and extreme temperatures. Frequent exposure to moving mechanical parts and loud noise.

1st Shift SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities. SIG SAUER is certified a Great Place to Work. For more information about the company and product line visit: **************** Position Summary: The Assembly Support Technician II will help with the day-to-day production needs and maintenance for all assembly equipment. In addition to firearms assembly, this position will involve assembly of remote weapons stations. The Technician will also assist Assembly Supervisors and Coordinators as well as help maintain 5S on the floor. The Technician will report to the Lead Manufacturing Engineer on first shift and will need to work flexible hours to accommodate training and learning between shifts. FLSA: Non-exempt Job Duties and Responsibilities: * Maintain machine, fixtures, and tooling on all lines. * Assist with 5S maintenance and upkeep for the assembly department. * Complete odd jobs to assist assembly process and flow. * Assist with assembly line maintenance and line setup and changes. * Assist with build on any assembly line when needed. * Maintain general knowledge including maintenance of automated machines and manual toggle presses. * Provide routine support of mechanical assembly, wiring, and plumbing of automated assembly equipment. * Participate on machine runoffs for new capital equipment per machine specifications. Duties include machine operation, training, and inspection. * Troubleshoot and fix production issues on legacy and new production products. Seek occasional support from Manufacturing Engineers for persistent issues. * Operate CMM equipment to complete capability studies and troubleshooting for new and existing processes. * Utilize 3D CAD software, SOLIDWORKS, to complete basic tooling part designs and modifications. * Deal with problems involving several concrete variables in standardized situations. * Assist with the creation, implementation, and maintenance of process documentation including work instructions, control plans, and visual standards. * Write routine reports and correspondence. * Speak effectively in one-on-one, small group situations, or to employees of the organization. * Work in a fast-paced environment, multitask, and adapt quickly to change. * Work with a high attention to detail. * Work safely in a variety of situations and follow rules and established processes. * May be required to work in other functional areas and/or facilities depending on business needs. * May be required to work overtime or alternate shifts based on business needs. * Engages in and actively volunteers for Continuous Improvement projects and tasks. * Miscellaneous duties as assigned. Education/Experience & Skills: * High School diploma or equivalent, 3-6 years of previous technician work experience, and Engineering education and experience in an assembly environment is a plus. * Minimum 2 years aiding in building, de-bugging, and run-off of automation machines. * Basic knowledge of 3D CAD software, preferably SOLIDWORKS, to create simple parts and drawings. * Demonstrated working knowledge of assembly line structure to properly identify maintenance tasks. * Demonstrated working knowledge of general assembly fixtures, equipment, tools, and gages. * Ability to read blueprints and interpret part specifications. * Quality of work must be very high. * Must be able to clearly, concisely, and accurately communicate ideas and information to others, both verbally and in written form. Written and verbal communication of technical subjects is required. * Organization of documentation and record keeping shall be to a high standard. * Must be able to execute multiple projects necessary to meet job duties and responsibilities. * Must work as part of a team and be able to lead, plan, and execute multiple projects. Working Conditions: * Regularly perform repetitive tasks. * Work is primarily standing (90 + % of the shift) except for lunch and break periods. * Shifts are 8 hours, 10 hours, and 12 hours. * The duties of this job normally require exposure to a typical manufacturing environment. Frequent standing, sitting, stooping/squatting, walking, and stair climbing can be expected along with frequent lifting and/or moving of tooling, parts containers, and materials up to 40 pounds. * Must be able to reach with hands and arms, bend and kneel frequently at a minimum of 50% of the shift, as well as undergo repetitive wrist, hand, elbow, shoulder, and ankle motions. * Must demonstrate proficient fine motor skills, ability to grip, reach, pull, turn, and use tools to torque fixtures in various machinery or in the assembly, machining, or testing of parts. * Specific vision abilities required may include close vision, distance vision, peripheral and depth perception, and the ability to focus on fine print. * Must wear required Personal Protective Equipment (PPE) where required. * Must comply with all work exposure EH&S training requirements and adhere to SIG SAUER Inc. security mandates. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

Job Description Who we are: Callahan Construction Managers is a full-service construction management company based in Bridgewater MA, with regional offices in White Plains, NY. Callahan has served the New England and Northeast regions as a family business for over 70 years. As one of the region's largest open shop construction firms, Callahan provides a wide range of preconstruction and construction management services to local, regional, and national clients. Callahan enforces a high quality and innovative approach to all projects, including multi-family residential, senior housing, affordable housing, hospitality, life sciences, corporate office, educational, retail and other markets. Visit ******************** for more information. Callahan has the unique ability to self-perform work. This division is responsible for self-performing the entire General Conditions package. Controlling this scope of work allows us to provide support, control, leverage, and value opportunities, while proactively addressing issues that could impact budget and schedule. Summary/objective: Seeking a Laborer to join our growing team. Ideal candidates must have a strong work ethic and an ability to follow directions. Scopes of work include, but not limited to: General cleaning and housekeeping Field office/trailer fit out Temporary protection Temporary containment Trash out service Select demolition Safety railing and toe boards Job-built stairs and ladders Trash chutes Signage installation Traffic control and site logistics Water mitigation Winter tarping and temp enclosures Snow and ice management Temporary heat management and fueling Emergency response Punchlist Essential functions: Loading and unloading of materials, tools, and equipment Removing debris, garbage, and materials from sites Assembling and breaking down barricades, temporary structures, and scaffolding Assisting contractors, e.g. electricians and painters, as required Following all health and safety regulations Qualifications: High school diploma preferred Construction work experience preferred Reliable transportation Report to work on time Must be able to lift 50 Lbs All qualified applicants will be afforded equal opportunity. There shall be no discrimination based on race, color religion, sex, sexual orientation, gender identity, national original or on an applicant's status as a protected veteran or as individual with a disability.

Job DescriptionTitle: Entry Level Production Worker (Sandblast) Type of Placement: Temp to hire Shift: Mon-Friday 7:30AM - 4PM Pay/Pay Range: $18-20/hr About Our Customer: Well established manufacturer in Londonderry, NH. Our client takes pride in providing a work atmosphere that is a relatively low key and temperature-controlled environment. They are an AS9100D & ISO 9001 certified company.Benefits upon Hired Perm: Medical (Company pays 70%) Dental 401K Two weeks off each July Summary:We are currently seeking a dedicated and skilled individual to join our team as an entry level Production Worker. In this role, you will be responsible for the critical process of surface cleaning cast aluminum parts for inspection. It involves using compressed air to propel abrasive material at a surface under high pressure (60 psi) in an enclosed cabinet.ESSENTIAL FUNCTIONS: Utilize high-pressure compressed air to clean cast parts to prepare for inspection. Follow established procedures and guidelines to ensure safe and efficient operation of tools and equipment. Inspect parts for defects or irregularities. Work independently to prioritize tasks and manage workload to meet production deadlines. Maintain a clean and organized work area to ensure safety and efficiency. Communicate any issues or concerns regarding equipment or materials to the supervisor. Adhere to all safety protocols and guidelines to minimize the risk of accidents or injuries. Participate in training programs to enhance skills and knowledge related to sandblast techniques. EDUCATION and/or EXPERIENCE: High school diploma or equivalent. Previous experience in a manufacturing or industrial environment, preferably in a role involving metal casting or fabrication, but not required. Strong attention to detail and ability to identify defects or irregularities in parts. Physical strength and endurance to lift and handle parts weighing up to 50 pounds routinely. Good communication skills and the ability to work independently. Willingness to work in a fast-paced environment and adapt to changing priorities. Ability to follow both written and verbal directions. Manual dexterity and good eye coordination is necessary. About Wicked Staffing Solutions: We have built long-standing relationships with some of the most reputable and well-known top companies that are hiring in manufacturing, distribution, customer service, engineering, electronics and many other industries. We offer temporary, temp-hire and direct placement opportunities, in a variety of positions. Equal Opportunity Employer

Job Description Assembly Support Technician II 1st Shift SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities. SIG SAUER is certified a Great Place to Work™. For more information about the company and product line visit: **************** Position Summary: The Assembly Support Technician II will help with the day-to-day production needs and maintenance for all assembly equipment. In addition to firearms assembly, this position will involve assembly of remote weapons stations. The Technician will also assist Assembly Supervisors and Coordinators as well as help maintain 5S on the floor. The Technician will report to the Lead Manufacturing Engineer on first shift and will need to work flexible hours to accommodate training and learning between shifts. FLSA: Non-exempt Job Duties and Responsibilities: Maintain machine, fixtures, and tooling on all lines. Assist with 5S maintenance and upkeep for the assembly department. Complete odd jobs to assist assembly process and flow. Assist with assembly line maintenance and line setup and changes. Assist with build on any assembly line when needed. Maintain general knowledge including maintenance of automated machines and manual toggle presses. Provide routine support of mechanical assembly, wiring, and plumbing of automated assembly equipment. Participate on machine runoffs for new capital equipment per machine specifications. Duties include machine operation, training, and inspection. Troubleshoot and fix production issues on legacy and new production products. Seek occasional support from Manufacturing Engineers for persistent issues. Operate CMM equipment to complete capability studies and troubleshooting for new and existing processes. Utilize 3D CAD software, SOLIDWORKS, to complete basic tooling part designs and modifications. Deal with problems involving several concrete variables in standardized situations. Assist with the creation, implementation, and maintenance of process documentation including work instructions, control plans, and visual standards. Write routine reports and correspondence. Speak effectively in one-on-one, small group situations, or to employees of the organization. Work in a fast-paced environment, multitask, and adapt quickly to change. Work with a high attention to detail. Work safely in a variety of situations and follow rules and established processes. May be required to work in other functional areas and/or facilities depending on business needs. May be required to work overtime or alternate shifts based on business needs. Engages in and actively volunteers for Continuous Improvement projects and tasks. Miscellaneous duties as assigned. Education/Experience & Skills: High School diploma or equivalent, 3-6 years of previous technician work experience, and Engineering education and experience in an assembly environment is a plus. Minimum 2 years aiding in building, de-bugging, and run-off of automation machines. Basic knowledge of 3D CAD software, preferably SOLIDWORKS, to create simple parts and drawings. Demonstrated working knowledge of assembly line structure to properly identify maintenance tasks. Demonstrated working knowledge of general assembly fixtures, equipment, tools, and gages. Ability to read blueprints and interpret part specifications. Quality of work must be very high. Must be able to clearly, concisely, and accurately communicate ideas and information to others, both verbally and in written form. Written and verbal communication of technical subjects is required. Organization of documentation and record keeping shall be to a high standard. Must be able to execute multiple projects necessary to meet job duties and responsibilities. Must work as part of a team and be able to lead, plan, and execute multiple projects. Working Conditions: Regularly perform repetitive tasks. Work is primarily standing (90 + % of the shift) except for lunch and break periods. Shifts are 8 hours, 10 hours, and 12 hours. The duties of this job normally require exposure to a typical manufacturing environment. Frequent standing, sitting, stooping/squatting, walking, and stair climbing can be expected along with frequent lifting and/or moving of tooling, parts containers, and materials up to 40 pounds. Must be able to reach with hands and arms, bend and kneel frequently at a minimum of 50% of the shift, as well as undergo repetitive wrist, hand, elbow, shoulder, and ankle motions. Must demonstrate proficient fine motor skills, ability to grip, reach, pull, turn, and use tools to torque fixtures in various machinery or in the assembly, machining, or testing of parts. Specific vision abilities required may include close vision, distance vision, peripheral and depth perception, and the ability to focus on fine print. Must wear required Personal Protective Equipment (PPE) where required. Must comply with all work exposure EH&S training requirements and adhere to SIG SAUER Inc. security mandates. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.