Machinist jobs in Traverse City, MI - 1,215 jobs

The CNC Lathe Operator is responsible for the manufacture of parts per plant specifications in an accurate and timely manner. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. 1. Set up; edit and operate CNC lathes. 2. Inspect completed parts to ensure conformance to specifications. 3. Cleans work area. 4. Remove tooling, fixturing, and return inspection equipment to proper area. 5. Minor machine maintenance (i.e. greasing, oiling, etc.) Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Basic Qualifications • Must be proficient using hand measuring instruments (micrometers, calipers, height gages, optical comparator, etc.). • Must be able to read and understand blueprints, specifications and routings • Ability to operate, adjust offsets; setup experience preferred, but not necessary • Ability to edit programs, fanuc controls, G code and M code programming • Requires mathematical skills that require the ability to add, subtract, multiply, and divide. • Must perform metric conversions. • Requires good oral and written communication skills in order to interact with employees. • Ability to true in jaws • Possess a good mechanical aptitude and/or prior machinist experience a plus Preferred Skills and Experience • Ability to work in a fast-paced environment. • Ability to communicate with all levels of the organization. • Ability to multi-task, establish priorities, set aggressive goals and achieve them. • Must be open to work overtime, as necessary. • 2 axis or 4 axis/live tooling • Ability to adjust taper on the OD/ID/face • Experience with tail stock and steady rests • Able to check pin size over threads • Knowledge of bore gages • Able to add extra passes to OD/bore/face if necessary • Experience on Mori Seiki, Daewoo, Danichi, Doosan Puma machines a plus Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The phrases “occasionally,” “regularly,” and “frequently” correspond to the following definitions: “Occasionally” means up to 1/3 of working time, “regularly” means between 1/3 and 2/3 of working time, and “frequently” means 2/3 and more working time). While performing the duties and responsibilities of this position, the employee is occasionally required to walk, use foot/feet to operate machine, reach above shoulders and move from place to place. The incumbent will regularly stand, sit and talk and listen and will frequently use hands to finger, handle or touch. Specific vision requirements for this position include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. During the performance of his/her work duties, the incumbent will be required to occasionally lift up to 50 pounds, and will frequently lift up to 25 pounds such as moving parts from material storage and moving parts in and out of work area. Competitive wages and benefits Job Type: Full-time 2nd Shift - 2:30 pm - 11:00 pm Monday through Friday PIfbe00a48c9bc-37***********7

Provisur is an industry leader that pushes the boundaries of ingenuity, bringing precision-engineered food processing equipment, aftermarket parts and service to customers around the world. We specialize in defrosting, grinding, mixing, separating, forming, and slicing equipment, offering leading brands and solutions across diverse applications. Our company culture is built on collaboration, continuous improvement, and a commitment to excellence. We take pride in empowering our employees, offering opportunities for professional growth, and creating an environment where everyone plays a role in our shared success. Join us and be part of an innovative, forward-thinking global team that is shaping the future of food processing. Learn more by exploring our videos at jobs.jobvite.com/provisur! Our CNC Set Up Machinists work in a newly renovated, air-conditioned facility with loads of natural light - we brought in 17 brand new CNC machines, and we work with live-tooling lathes and state of the art mills. Pay: $40.97/hour (includes shift differential). Relocation assistance available for non-local candidates. Position is 2nd shift and follows a 4/10 schedule: Monday - Thursday, 3pm to 1 am. What You'll Do: Setup and operate CNC lathe and mill machines to produce parts in accordance with blueprint specifications and work instructions Read and interpret blueprints, inspection check-sheets, and instructions Use inspection gauges such as calipers, micrometers, and height gauges to perform quality checks on parts, and make adjustments on machines and tools What You Won't Do: Feel like a number - we value respect, teamwork, and collaboration at every level Suffer from boredom - you're always doing and learning new things, with a variety of clients and coworkers around the world Max out - you'll grow and advance as a machinist, with opportunities to advance into a supervisory role, Industrial Engineering, CNC Programming, or even join our Sales team Who You Are: A tinkerer who loves to uncover how things work and troubleshoot until they find a solution A problem-solver who thinks quickly on their feet without losing sight of important details A lifelong learner with a passion for advancing your career and raising your hand when opportunities arise What You'll Need: Hands-on knowledge of CNC machines, either gained on the shop floor or from a CNC degree program CNC setup experience with the ability to operate in a job shop, performing several setups throughout the day A desire to learn new things, apply what you already know, and never shy away from sharing your opinion to improve a product or process What You'll Enjoy: A team that collaborates well and truly enjoys working together Environment where we promote from within, cross-train and provide ongoing skill development Robust benefits package including great health insurance, holiday pay, employee referral bonuses, and even pet insurance! Safe, clean, air-conditioned facility Retirement savings (401k) opportunities Paid Time Off (PTO) A company dedicated to the local community that gives back through charitable contribution

We are Toshiba. We have an unwavering drive to make and do things that lead to a better world. At Toshiba, we commit to raising quality of life for people around the world, ensuring progress that is in harmony with our planet. Our core values include: Do the Right Thing, Look for a better way, Always consider the impact and Create Together. Toshiba America Energy Systems Corporation (TAES) provides energy industry solutions - new equipment, retrofits, maintenance, outage planning and more - for current and future power generation needs in the Americas, including thermal, hydro and nuclear power plants. Position Summary We are seeking a 2nd shift CNC Machinist to work out of the West Allis, WI facility. The CNC machinist sets up and operates CNC machines or machining centers to fabricate metal parts, applying knowledge of shop theory and practice, shop math, machinability of materials and layout techniques. Essential Duties Study blueprints, sketches, drawings, manuals, specs, or sample parts to determine dimensions and tolerances of finished work. Determine sequence of operation. Select, align, and secure holding fixtures and cutting tools. Calculates and sets controls to regulate machining factors, such as speed, feed, flow, and depth/angle of cut. Set up and operate machine on trial run to verify accuracy of machine settings or programmed control data. May enter commands to retrieve, input or edit programs. Start, observe machine operation to detect malfunctions or out-of-balance machining and adjust machine as required. May confer with engineers, product personnel, programmers, or others to resolve machining problems. Perform inspections at the machine to verify part is to specifications. Perform daily and weekly maintenance on machines as outlined in preventative maintenance procedures. Maintain clean and orderly workstations by their assigned machines. Support supervisor and in process development and tooling development. Be an active team member in 5-S initiatives. Train and assist other operators in variety of machine tools. Willingness to support other departments to meet customer schedules and demands, this includes but not limited to performing assembly work, running manual machines like Bridgeport mills and grinders. Operate cranes and fork trucks. Education and Required Experience Technical schooling in related field preferred. 5 -10 years' experience in shop math and metrics. Ability to read blueprints. Must be highly qualified and experienced in operating CNC machines or machining centers. Must understand G-code and M-code programs. Must be able to set up machines, troubleshoot set-ups, and troubleshoot programs. Must be able to perform own inspection of parts by using all types of measuring equipment. Must demonstrate good manufacturing practices and be able to select tooling and machining resources for manufacturing of parts Physical Requirements (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.) The employee must be able to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision and Ability to adjust focus. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to finger, handle, or feel. The employee frequently is required to talk or hear. The employee is occasionally required to sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. Work Environment While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts, fumes, or airborne particles, and toxic or caustic chemicals. The employee is occasionally exposed to work in high, precarious places, and risk of shock. The employee is occasionally exposed to extreme heat, extreme cold and wet, humid conditions. The noise level in the work environment is frequently loud. Additional Info Toshiba employees enjoy a comprehensive compensation and benefit package including an annual bonus, a generous 401k match, health and wellness programs as well as generous t ime off. Toshiba is an Equal Opportunity Employer.

This role is responsible for troubleshooting, repairing, and calibrating CNC and production equipment to ensure reliable plant operations. The position offers hands-on technical work, exposure to advanced machinery, and the opportunity to build long-term skills in mechanical, electrical, and electronic maintenance within a stable manufacturing environment. RESPONSIBILITIES • Identify and resolve mechanical, electrical, and electronic issues across a wide range of standard and complex manufacturing equipment. • Utilize precision diagnostic tools such as meters, micrometers, torque tools, oscilloscopes, and laser alignment equipment to perform accurate repairs. • Interpret drawings, schematics, and specifications to complete equipment alignment, spindle and bearing work, and component fitting. • Fabricate and machine replacement parts as needed, including complex setups and precision layouts. • Install, maintain, and troubleshoot plant electrical systems, wiring circuits, and control panels in accordance with applicable codes. • Diagnose and repair electronic controls using relay logic, ladder diagrams, and digital control principles. • Coordinate with external vendors or service providers when specialized technical support or parts information is required. • Support equipment installations, removals, and upgrades, including millwright and wiring activities. • Assist other maintenance team members with advanced troubleshooting and corrective actions. • Operate material handling equipment as required and respond to emergency repair needs outside of standard hours when necessary. • Adhere to all safety protocols, including lockout/tagout procedures, and maintain a clean, organized work area. QUALIFICATIONS • Extensive knowledge of mechanical and electrical maintenance practices in a manufacturing environment. • Hands-on experience setting up and operating machine tools to produce repair and replacement components. • Strong understanding of hydraulic, pneumatic, and electronic control systems. • Ability to read and interpret blueprints, schematics, and detailed engineering documentation. • Working knowledge of basic math and trigonometry. • Completion of an apprenticeship program or equivalent technical training, plus approximately four to five years of related maintenance experience. • OSHA-related certifications or safety training preferred. BENEFITS • Stable, full-time first shift schedule supporting work-life balance. • Hands-on exposure to advanced CNC and manufacturing technology. • Opportunity to expand technical skill sets across mechanical, electrical, and electronic disciplines. • Collaborative team environment with access to experienced maintenance professionals. • Long-term career growth within a well-established manufacturing operation.

Summary: Responsible for setting up and operating computer numerically controlled (CNC) machines to produce precision components that meet quality and production requirements. Essential Duties and Responsibilities: Interprets component drawings, studies sample parts, blueprints and engineering information to determine product dimensions and tolerances, sequence of operations and setup requirements to fabricate product. Determines tooling requirements by selecting the appropriate tools, machines, and materials to be used in preparation of machinery work. Selects, aligns and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines; lays out, measures, and marks material for subsequent machining. Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media according to established guidelines and procedures. Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls as required. Verifies conformance of finished work-piece to specifications, using measuring and inspection tools as necessary. Effectively operates a variety of other machining equipment including manual machines, Wire EDM and Sinker EDM. Accurately completes production and quality documents. Performs basic machine tool troubleshooting by utilizing and interpreting operator/maintenance manuals; cleans and lubricates machines, tools, and equipment to remove grease, rust, stains, and foreign matter. Maintains a clean and organized work area. Strives to improve productivity, reduce scrap and material waste in an efficient and organized manner. Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. Performs other production assignments as necessary. Maintains a professional working relationship and effectively communicates with all employees, managers, vendors, customers and regulatory agencies. Understands and complies with company policies and procedures, regulatory requirements and safety regulations. Regular attendance at work is required. Qualifications: High school diploma or general education degree (GED); two years or more related experience and/or training; or equivalent combination of education and experience. Work Hours: 1st shift: Monday through Friday 7:00AM to 3:30PM; optional overtime available before and/or after the regular shift. 2nd shift: 4 ten-hour days Monday through Thursday from 3:30PM to 2:00AM; plus Fridays are optional overtime! Part-time options may be available. To Apply: Click on the button below, or email your resume to . Additional Opportunities: Check out the Careers page on our website at *************************** We are growing and have several opportunities for motivated, talented individuals on 1st & 2nd shift! In addition to a 4 ten-hour day schedule, we offer our 2nd shift employees a shift premium! All employment decisions are made on the basis of qualifications, merit and business need. Gauthier Biomedical values diversity and is an Equal Opportunity Employer. We are a Drug Free Workplace, where medical devices and rewarding careers are built. Don't miss this remarkable opportunity to join the Gauthier Biomedical Team! Apply today!

Find a Career you LOVE at JCT! If you are a team player, we have been searching for you! 2nd shift Manual Vertical Lathe Operator. You would be responsible for your own setup and operation of our 42" to 74" lathes to machine steel, aluminum, nickel and copper. Experience and your own tools are a plus, but not required. We are willing to train people with the proper schooling or machining experience in another area. Join a machine shop who has invested over 5 million dollars in new and updated technology the past few years alone. Go to *************** to learn more about our 120 year old 4th generation family-owned company and apply for your new career today! BENEFITS: PAID WEEKLY FAMILY-OWNED HEALTH/DENTAL/LIFE INSURANCE PROFIT SHARING & 401K RETIREMENT PLANS PAID VACATION/PTO/PAID HOLIDAYS QUALITY & SAFETY BONUS UNIFORMS PROVIDED PAID LIFE INSURANCE NURSE PRACTITIONER ON-SITE WEEKLY $600 BONUS AFTER PROBATION 4 Day Work Week (10 hour shifts) Monday thru Thursday with optional Friday overtime. NO WEEKENDS!

JOURNEYMAN TOOL & DIE MAKER requires relocation to Thomasville, GA.- ------------------------------------------------------------------------------------------------- *US Citizens and Green Card Holders only* -Relocation assistance available- Check-Mate Manufacturing has openings position for Tool and Die Maker. This position reporting to the Tooling Manager, the Tool and Die Maker has a Journeymen license or has completed formal apprenticeship program. Tool and Die Maker builds, repairs, and maintains: dies, fixtures, and all other tooling in conformance to customer and/or company specifications per control plans. Analyzes specifications, lays out metal stock, set up and operate machine tools, and fits and assembles parts to makes and repairs dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools. Maintains a safe working environment by ensuring compliance with procedures and safety regulations. ESSENTIAL FUNCTIONS: Includes, but may not be limited to the following Tool and die maker conduct test runs with completed tools or dies to ensure that parts meet specifications; makes adjustments as necessary. Tool and die maker cuts, shapes, and trims blanks or blocks to specified lengths or shapes, using power saws, power shears, rules and hand tools. Tool and die maker files, grinds, shims, and adjusts different parts to properly fit them together. Tool and die maker fit and assembles parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools. Tool and die maker inspect finished dies for smoothness, contour conformity, and defects. Tool and die maker lifts, positions, and secures machined parts on surface plates or worktables, using hoists, vises, v-blocks, or angle plates. Tool and die maker measures, marks, and scribes' metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes, and rulers. Tool and die maker select metals to be used from a range of metals and alloys, based on properties such as hardness and heat tolerance. Tool and die maker set up and operates conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes. Tool and die maker set up and operate drill presses to drill and tap holes in parts for assembly. Tool and die maker smooths and polishes flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders. Tool and die maker studies blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies. Tool and die maker verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators. Tool and die maker visualize and computes dimensions, sizes, shapes, and tolerances of assemblies, based on specifications. Tool and die maker casts plastic tools or parts, or tungsten-carbide cutting tips, using pre-made molds. Tool and die maker designs jigs, fixtures, and templates for use as work aids in the fabrication of parts or products. Tool and die maker develop and designs new tools and dies, using computer-aided design software. Tool and die maker set pyrometer controls of heat-treating furnaces, and feed or place parts, tools, or assemblies into furnaces to harden. Skills and Competencies Tool and die maker ability to read tool and die designs and prints Tool and die maker basic shop math and trigonometry Tool and die maker ability to use precise measuring equipment such as micrometers, calipers, gauge blocks, dial indicators, etc. Tool and die maker ability to operate all standard tool room equipment such as milling machines, drill presses, surface grinders, lathes, etc. CNC machine set up a plus Tool and die maker must have strong analytical and troubleshooting skills Tool and die maker general knowledge of tool and die design including various tool steels/carbides and their application is a plus Tool and die maker able to work independently and be self-motivated Tool and die maker must be able to work without supervision and lead small teams as required Tool and die maker ability to work with appropriate outside vendors Tool and die maker ability to train and develop apprentices Tool and die maker ability to communicate well with others Safety, Health, Environmental (SH&E) Tool and die maker ability to manually operate tool room machinery Tool and die maker ability to access tooling both in and out of machines to troubleshoot problems Tool and die maker support and comply with all procedures and work instructions. Tool and die maker must observe all safety regulations to ensure employees own safety as well as the safety of others. Support a safe and healthy work environment that is free of recognized hazards for all employees, contractors and visitors. Tool and die maker cooperate with all local, state and federal agencies, such as OSHA or the EPA, in the event of an inspection. Tool and die maker know and follow all applicable SH&E Policies and Procedures. MINIMUM REQUIREMENTS High School Diploma or equivalent education or trade school diploma program Journeyman Tool & Die Maker and/ or completion of an apprenticeship (4 years) or advanced manufacturing certificate, followed by at least 4 years of on-the-job training 5 years' experience in the trade; emphasis on small precision stampings from progressive dies An ability to communicate effectively in English both in writing and verbally (Preferred) Knowledge/ experience with of AutoCAD, Solid works, and EDM (a Plus BENEFITS Excellent compensation packages Medical, Dental, Vision, Life, Short-term and long-term disability 12 Days PTO and 10 Holidays 401k participation after 1 year Training and Development Opportunities Annual COLA increases Relocation Assistance EOE/AA/M/F/VET/D

Whether you're just beginning your career or have years of experience-you've come to the right place - Dynatect Manufacturing, Inc! Since 1945, Dynatect has been making products that add protection, safety, and security for other equipment manufacturers. Some of the industries include automation, medical, emergency vehicles, transportation, sports, machine tool, construction, and even movie props - like the bus bellow in the movie Dead Pool 2! Click HERE to see examples of our many processes, custom products, and applications. The Dynatect team enjoys a dynamic, clean, and safe work environment with excellent benefits including: 10-paid holidays every year Accrue PTO within weeks 401k match Tuition reimbursement $2,000 referral bonus In-house training and cross-training programs Career advancement See more of our benefit package on our Careers Page. A Day in the Life of a CNC Lathe/Mill Machinist: You will machine parts to meet Dynatect and customer specifications. You will write, edit, load and execute a CNC program. You will set up machines with minimal supervision and assistance upon completion of training. You need to meet required production and productivity targets. You will measure work pieces. You will maintain all tools and ensure they are in proper working order. You will ensure quality standards. All other duties as assigned. Why you? You thrive in a manufacturing environment. You enjoy collaborating and communicating with your teammates. You deliver quality craftsmanship products and take pride in the work you produce. You are reliable and come to work with a positive attitude. You work in a safe manner. You are willing to learn and grow in your career. What You Need: A high school diploma or equivalent. 6 months or more experience is preferred. To be able to communicate effectively in English. Ability to use sound judgment and reasoning. Ability to program in G-code and conversational programming languages. Ability to prioritize, managing time and workload. Basic math skills are required, including geometry. To be able to read a ruler, tape measure, micrometers, calipers, etc. Ability to read and interpret part prints. To be able to frequently stand and walk. To be able to lift a minimum of 50 lbs. To be at least 18 years old. Hold a valid driver's license and be able to operate a motor vehicle. To be able to read and understand blueprints and work orders. This Job Is: A job for which military experienced candidates are encouraged to apply A “Fair Chance” job (you or the employer follow Fair Chance hiring practices when performing background checks) A good fit for applicants with gaps in their resume, or who have been out of the workforce for the past 6 months or more Open to applicants who do not have a college diploma Check out our Working at Dynatect page for more information on who we are, core values, our mission, and what it's like to work at Dynatect Manufacturing. 🔔 If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Summary: This role builds and develops dies and tools for production of quality product Required Education and Experience: * Tool & Die Maker certificate * Good communicator in the English language, both written and oral * Thorough knowledge of operating Toolroom and production equipment * Ability to use a computer * Knowledge of SPC guidelines * Ability to use time management and problem solving skills * Thorough knowledge of blue print reading and interpretation of tools, and dies Essential Functions: * Ensure timely completion of repairs, housekeeping of toolroom, new dies, tooling, fixtures and jigs etc as required so that production is not interrupted by the following: * Compute dimensions and tolerances and set up machine tools * Position, secure, measure and work metal stock or castings to lay out for machining * Set up, operate and maintain a variety of machine tools * Know how to perform toolsteel welding * Verify machined parts for conformance to specifications using precision measuring instruments * Fit, assemble or disassemble parts using hand tools * Machine, fit and assemble casting and other parts to make metal patterns, core boxes * Ensure preventative maintenance program are done on tools and dies based on assigned schedules * Address all quality related problems and provide prompt resolutions and recommendations so as to minimize production interruption * Ability to accurately document daily tasks and fill out production sheets * Minimize costs of operating through proper planning and efficient use of all available resources * Quantitative Measurables: * 38 Presses to maintain * 1200 dies to maintain * Ensure compliance with all applicable codes, standards and legislation including Environmental Legislation, O. Reg 851 for Industrial Establishments, and the Occupational Health and Safety Act (with emphasis on Section 28, (1) (a)-(d), (2) (a)-(c)) * Abide by all Company polices including, but not limited to the following: Health and Safety, Quality and Environmental Systems, Human Resources policies, and the Martinrea Employee Handbook Work Environment: * 100% plant floor (PPE required) Decision Making and Authority: * Decision Making: * Die/ tool troubleshoot/ repair * Response to production requirements, set priorities * Recommendations: * Cost Savings, Quality and Safety * Quantitative Measurables: * 38 Presses to maintain * 1200 dies to maintain Physical Demands: * Frequent requirement of handling heavy equipment (operation) * Frequent need to give concentrated attention to surroundings * Must be able to lift up to 35lbs. * Must be able to work with push pull forces of up to 50lbs. or less Health and Safety: * Must work in accordance with Health and Safety regulations, Company and plant rules, policies and procedures * Must use or wear Personal Protective Equipment and certain clothing as required by the Company Other Duties: * This is not designed to contain a comprehensive list of duties and responsibilities required for this job. Duties and responsibilities may change at any time with or without notice Disclaimer: This job description does not constitute a contract of employment.

Senior Machinist Job Posting Job Type: Full-Time Industry: Aerospace, Defense, Precision Machining, Manufacturing Join a Leading Precision CNC Shop! We are a precision CNC machining company specializing in prototype and low-volume production for aerospace, defense, and industrial markets. AS9100-certified and dedicated to quality, efficiency, and continuous improvement, we're looking for a Senior Machinist to lead by example on the shop floor-handling complex setups, mentoring junior machinists, and driving performance through technical leadership. What You'll Do: Set up and operate CNC mills and/or lathes using ProShop ERP job travelers and engineering drawings Interpret GD&T and validate part conformance using tools like micrometers, indicators, and height gages Create or edit CNC toolpaths using Mastercam as needed to support operations Optimize tooling, feeds/speeds, and setup processes for efficiency and quality Perform in-process inspections and coach machinists on quality-at-the-source Collaborate with the Manufacturing Manager on priorities, issues, and workflow optimization Document job progress and inspection results in ProShop ERP Identify and contribute to process improvements across the shop floor Promote and maintain a clean, safe, and well-organized work environment Requirements What We're Looking For: 5+ years of experience in CNC machining with strong setup and troubleshooting skills Proficient in blueprint reading and GD&T interpretation Experience with Mastercam, ProShop ERP, and mechanical inspection tools Solid knowledge of machining strategies, tooling, and material behaviors Strong communication skills and a natural leadership presence Familiarity with AS9100 procedures and documentation Reliable, self-motivated, and focused on quality and continuous improvement Benefits What We Offer: Hands-on leadership opportunity in a growing, team-focused environment Clean, organized shop with modern equipment Small team where your experience makes a real impact Competitive pay based on experience Benefits available after the probationary period A culture built around learning, accountability, and doing things right Ready to Apply? If you're an experienced machinist with a passion for precision and leadership, we'd love to connect. Help us make exceptional parts-and an even better team.

Set-up, check routine programs, operate and adjust automatic or semi-automatic numerically controlled machine tools and/or CNC machining equipment to perform standard or repetitive sequences of operations to meet close tolerance and finish requirements Recognize tool and fixture applications and proven program format Follow detailed part drawings and specifications regarding applications, coding, arrangements and settings Note and report variations from specifications Under supervision, assist with prove-out of program tapes for new work or critical variations Recommend tooling arrangements, fixtures, operation sequence, etc. Make setups for and instruct Machine Operators of lower classification for previous programs Use a variety of precision measuring instruments POSITION REQUIREMENTS: High school diploma or equivalency and three to five years-experience in a manufacturing environment or an equivalent combination of education and experience. Set-up experience required Ability to read blueprints. Strong knowledge of machining practices. Good understanding of tooling and grades. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to sit; use hands to finger, feel or handle objects, tools or controls; and reach with hands or arms. The employee is occasionally required to stand and walk; climb or balance; and stoop, kneel, crouch and crawl. Must be able to walk or stand on concrete for up to 4 hours at a time. Must be able to lift 50 pounds without assistance. • Specific vision abilities required by this job include close and distance vision; color vision; peripheral vision; depth perception and the ability to focus.

At Paslin we are all about engineering excellence, innovation and vertical manufacturing competence. Our commitment to quality and excellence is evident in every project we undertake. Our team is passionate about automation powered by innovation! If you're looking for a place where you can make a real impact, work with awesome people, and grow your career, you've come to the right spot. We are seeking a skilled and detail-oriented BORING MILL MACHINISTS to join our Machine Shop and Manufacturing team. We have both entry level and senior level positions available. We're looking for skilled Boring Mill Machinists to set up and operate horizontal boring, drilling, and milling machines with accuracy and efficiency. You'll handle machining operations like milling, drilling, boring, and reaming, while laying out workpieces, setting feeds and speeds, and verifying dimensions using precision instruments. If you know how to secure setups, read layouts, and machine plates or basic weldments with confidence, this is your opportunity to join a team that values craftsmanship. Bring your skills, attention to detail, and commitment to quality. Let's build something great together. Details about the role: Work location: Ryan Road, Warren, MI Work type: On-site at local Paslin locations. Not available for remote work. Expected hours of work: Typical work schedules for this site are 6am-230pm, Monday to Friday. Overtime: This position is for regular, full-time work and may require coming in early, working late, or working on weekends to meet the needs of the business. Travel: This position may require occasional travel to customer sites or local travel to other Paslin locations. Work Environment: This position operates in a manufacturing site environment. This is a safety sensitive role, which includes working around moving equipment and machinery. Physical Demands: The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, walk, bend, and twist. This role requires the use of hand operated tools and machine controls. Occasionally required to lift/push/pull up to 40lbs. Candidate Qualifications: High School Diploma or GED equivalent preferred Machinist experience, prior work with Devleig or GNL milling equipment is a plus Knowledge of shop mathematics, metal properties, and machining procedures Able to read blueprints and set up equipment accordingly Able to use overhead crane What's in It for You: Competitive pay and great benefits. Paslin offers a wide range of benefits including Paid Time Off, Paid Holidays, 401k Match, Medical, Dental, Vision, Accident, and Life Insurance. A chance to improve your skills and your career. Paslin believes in investing in people and offers a variety of development programs with excellent opportunities for individual growth through training, tuition reimbursement, and career advancement. A supportive, collaborative team and a fun, engaging work environment. Check out our company page on LinkedIn to learn more about our values and see how we give back to our community. Paslin is an Equal Opportunity Employer: It is our policy to provide equal employment and advancement opportunities to all employees and applicants without regard to race, sex (including pregnancy and conditions related to pregnancy), color, ancestry, national origin, gender, sexual orientation, marital status, weight, height, religion, age, physical or mental disability, gender identity, results of genetic testing, AIDS, HIV, misdemeanor arrest record (not resulting in a conviction), military veteran status or any other characteristic protected by local, state, or federal law. Paslin utilizes a consumer reporting agency to obtain consumer reports as defined by the Fair Credit Reporting Act.

The CNC Lathe Operator is responsible for the manufacture of parts per plant specifications in an accurate and timely manner. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. 1. Set up; edit and operate CNC lathes. 2. Inspect completed parts to ensure conformance to specifications. 3. Cleans work area. 4. Remove tooling, fixturing, and return inspection equipment to proper area. 5. Minor machine maintenance (i.e. greasing, oiling, etc.) Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Basic Qualifications Must be proficient using hand measuring instruments (micrometers, calipers, height gages, optical comparator, etc.). Must be able to read and understand blueprints, specifications and routings Ability to operate, adjust offsets; setup experience preferred, but not necessary Ability to edit programs, fanuc controls, G code and M code programming Requires mathematical skills that require the ability to add, subtract, multiply, and divide. Must perform metric conversions. Requires good oral and written communication skills in order to interact with employees. Ability to true in jaws Possess a good mechanical aptitude and/or prior machinist experience a plus Preferred Skills and Experience Ability to work in a fast-paced environment. Ability to communicate with all levels of the organization. Ability to multi-task, establish priorities, set aggressive goals and achieve them. Must be open to work overtime, as necessary. 2 axis or 4 axis/live tooling Ability to adjust taper on the OD/ID/face Experience with tail stock and steady rests Able to check pin size over threads Knowledge of bore gages Able to add extra passes to OD/bore/face if necessary Experience on Mori Seiki, Daewoo, Danichi, Doosan Puma machines a plus Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The phrases occasionally, regularly, and frequently correspond to the following definitions: Occasionally means up to 1/3 of working time, regularly means between 1/3 and 2/3 of working time, and frequently means 2/3 and more working time). While performing the duties and responsibilities of this position, the employee is occasionally required to walk, use foot/feet to operate machine, reach above shoulders and move from place to place. The incumbent will regularly stand, sit and talk and listen and will frequently use hands to finger, handle or touch. Specific vision requirements for this position include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. During the performance of his/her work duties, the incumbent will be required to occasionally lift up to 50 pounds, and will frequently lift up to 25 pounds such as moving parts from material storage and moving parts in and out of work area. Competitive wages and benefits Job Type: Full-time PI8ea275234196-31181-37848125

Job Description Building the future of tooling, begins with building a great team! CG Automation & Fixture (CGAF), located in Comstock Park, MI is looking for a CNC Machine Apprentice! We offer growth opportunities, great benefits (paid time off, paid holidays, medical/dental/vision insurance, 401k) and a climate-controlled facility. Our state of the art facility boasts the latest machining technology in the area and our workforce can build the impossible. This position is ideal for a highly motivated team-player who thrives in a fast-paced environment. The intention for this position, following an evaluation period, would be to consider participation in our Apprenticeship Program. This program allows for company-paid apprenticeship coursework through Grand Rapids Community College and paid on-the-job training to earn a journeyman's certification. Primary Functions and Responsibilities: Able to work with minimal supervision in an efficient, effective manner. Receive materials and distribute to machines Assist machinists in basic set-ups Inventory in-house raw materials Basic machine maintenance Clean machine waste Able to multi-task and possess organizational skills Possess basic math skills: ratios, weights, metric systems Possess mechanical skills and able to operate hand tools. Qualifications: Must have a high school diploma or G.E.D. Must be willing to work overtime as needed. Must possess sound problem-solving skills. Must possess quality communication skills. Commercial Tool Group (Commercial Tool & Die; CG Automation & Fixture; and CG Plastics) is an Equal Opportunity Employer Job Posted by ApplicantPro

Job Description Part-Time Manual Machinist/Drill Press Setup American Bolt Corporation in New Berlin, WI is looking to hire a part-time Manual Machinist to setup our mill/drill presses (Bridgeport and Birmingham). Would you like to work for an established, family-owned fastener distributor that truly values its employees? This is a part-time role with some flexibility on work hours. Pay is competitive against the market and will be determined based on setup skill and experience with our milling machines. We offer part-time employees flexibility in hours and 401k. If this sounds like the right setup opportunity for you, apply today! WORK SCHEDULE Open availability expected, up to 28 hours per week. Details will be discussed in interview/offer. QUALIFICATIONS FOR THIS SETUP POSITION 5+ years' experience operating manual milling/drill press machines Extensive setup experience on Bridgeport, Birmingham, or similar mills Ability to lift 50 pounds regularly Are you a skilled setup machinist? Are you self-motivated? Are you quality-focused? If yes, apply today! ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this position, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Location: 53151

Job DescriptionDescription: Manual Machinist, Lathe, Mills We are looking for a Manual Machinist to join our team. In this position, you will help us create Rods, Cylinders and other components using a variety of equipment, such as a lathe, drill press, boring bar, and Milling machines. Our ideal candidate has completed a training program through an industry apprenticeship or earned a machinist certificate from a vocational school and has at least 8 years of manufacturing experience. Prior roles as a lathe operator or in another manual machining position is a Must. CNC set up and operation is a plus. Requirements: Machining hydraulic cylinder shafts and components 30-120" long average, holding .001" tolerances, General machining of piece parts, short runs. Using prints or sketches, reverse engineer replacement parts. Basic understating of Hydraulic cylinders required. You will be required to accurately measure parts using Micrometers, Calipers, Dial indicators. Below is a list of job duties performed regularly: Turn down and thread 2" diameter x 48" long Chrome plated rod. Machine and thread a 3.500" -4" Shaft Thread The inside of an 8" bore cylinder Drill & tap 12" bolt circles Bore holes for spherical bearings of all different sizes Machine a rod to 5" square wrench flat.

Your Job Phillips-Medisize, a Molex Company is an end-to-end provider of innovation, development and manufacturing solutions to the pharmaceutical, diagnostics and medical device industries. Our New Richmond, Wisconsin location is seeking a Sr. Machinist/ Tool Maker to ensure precision and quality of the products we deliver to customers worldwide. Shift Options: 1st, 7am - 3pm, M-F 2nd, 3pm - 11pm, M-F 3rd, 11pm - 7am, S-Th Weekends Fri-Sun 5am-5pm or 5pm-5am Our Team At Phillips-Medisize, our goal is to create value for others. We empower every team member to hear, feel and see the quality in every action we take. By incorporating quality into the design of products and processes and predicting potential quality problems before manufacturing and delivering the product, we can create mutual benefit. The leading task of quality control involves enforcing the use of specified processes and materials, ensuring the qualification of operators and equipment, and making a series of planned measurements to determine if quality standards are being met. What You Will Do Repair and revise molds and secondary tooling Troubleshoot complex mold problems and help keep production molds in efficient operating condition Troubleshoot fixture problems and help keep production fixtures in efficient operating condition Create documentation and drawings for revisions Assembly and disassembly of all components required in mold repair process Replace tool room supplies and equipment, and tooling spares inventory management Ensure molds are properly cleaned, prepped, assembled, and staged for production runs per scheduling requirements Evaluate new mold performance in production Set up and operate toolroom equipment, including manual and/or CNC Ensure the mold storage system is organized and updated Other duties as assigned Who You Are (Basic Qualifications) 5+ years of tool repair OR tool building OR Advanced machinist experience Experience of tool building and designing What Will Put You Ahead Solidworks or Mastercam experience Design and build fixtures. Experience problem solving and troubleshooting Experience working with thermoplastic molds Journeyman Mold Repairer This position is not eligible for VISA Sponsorship. At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here . Who We Are As a Molex company, Phillips-Medisize mobilizes and deploys specialized capabilities and services across highly regulated industries, including health care, regulated consumer, automotive and defense. We design, develop and create innovative and life-changing medical technologies for millions of people around the globe. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, some offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here , aquí , or tu ). #LI-SD5

Job DescriptionBenefits: Company parties Competitive salary Dental insurance Paid time off Health insurance Opportunity for advancement Training & development Vision insurance Benefits/Perks Competitive Compensation Great Work Environment Career Advancement Opportunities Job Summary We are seeking a Manual Machinist to join our team! As a Machinist, you will be working with a variety of machines and manufacturing equipment as needed and per blueprint or job order specifications. You will also be repairing and maintaining your equipment as needed, assisting other machinists with larger tasks, and maintaining a safe work environment. The ideal candidate has exceptional attention to detail, previous experience in a manufacturing environment, and the ability to work well with minimal supervision. Responsibilities Read blueprints or job orders and make adjustments to equipment as needed, often with precision tools Check final products for accuracy, and make adjustments to machines as needed to ensure the best final product Conduct basic maintenance and repairs on equipment in your care Operate surface grinders for precision finishing of parts Operate jig grinders for precision sizing of bores Operate knee mills or bed mills for manual machining Operate tooling lathes Standard Hours, OT is added at the end of a shift 6:00am-2:30pm M-F 7:00am-3:30pm M-F Qualifications Previous experience as a machinist or in a manufacturing environment The ability to read blueprints or job orders and make minor adjustments as needed to fulfill requirements The ability to use precision tools to take accurate measurements Excellent attention to detail Strong analytical skills

About Fairbanks Morse Engine Located in Beloit, Wisconsin, Fairbanks Morse Engine (FME) manufactures, assembles, tests, and distributes heavy-duty, medium-speed reciprocating engines under the Fairbanks Morse and ALCO brand names. Fairbanks Morse manufacturing is conducted in its U.S.-based facility. FME sells its high-performance engines directly to naval marine customers and shipyards. As a principal supplier of reliable diesel engines to the U.S. Navy, Military Sealift Command, U.S. Coast Guard, and the Canadian Coast Guard, FME enables the defense industry to complete worldwide mission-critical operations. FME is a division of Fairbanks Morse Defense, a portfolio company of Arcline Investment and a leading provider of reliable marine power solutions. Learn more about FME by visiting *********************** Fairbanks Morse is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, age, ancestry, national origin, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Position SummarySet up and operate an individual manual machine tool or several machine tools organized in a work group or cell.Responsibilities Receives assignment, drawings, process documents and/or verbal instructions. Sets up machines using tools and equipment needed according to standard work instructions and machine requirements. Selects feeds and speeds Performs work to tolerances indicated, checking own parts to insure compliance with quality requirements. Assembles, tests and calibrates fuel injection parts per standard procedure within close tolerances. Performs assembly of other components such as piston skirts, liners, camshafts, etc. May be required to operate two machines simultaneously or perform other miscellaneous duties such as deburring or checking work during machine cycle. Maintains standard work files, fixtures, tooling, etc. Keeps machine clean and performs daily routine maintenance checks. Handles medium weigh materials by hand and heavier materials by hoist or crane. Qualifications, Skills and Educational Requirements Proven experience/knowledge in setting up/operating manual machine. Technical knowledge and ability to read blueprints, drawings etc. Good understanding of quality control principles. Excellent hand-eye coordination and physical condition. High school diploma; Higher degree from a technical school will be appreciated. Ability to work in a multi-disciplinary team environment. Ability to work independently w/minimal supervision. Ability to maintain confidential information. Ability to thrive in a critical thinking environment. Excellent time management and organizational skills. Demonstrated problem-solving techniques. Excellent written and verbal communications skills.