Post job

Explore jobs

Find specific jobs

Explore careers

Explore professions

Best companies

Explore companies

OverviewJobs

Skills

EducationDemographicsJob DescriptionHow To HireBest CompaniesJob OutlookCompareEntry Level jobsFull Time jobs
zippia ai icon

Automatically apply for jobs with Zippia

Upload your resume to get started.

Metal buildings assembler skills for your resume and career

Updated January 8, 2025
3 min read
Below we've compiled a list of the most critical metal buildings assembler skills. We ranked the top skills for metal buildings assemblers based on the percentage of resumes they appeared on. For example, 30.1% of metal buildings assembler resumes contained hand tools as a skill. Continue reading to find out what skills a metal buildings assembler needs to be successful in the workplace.

15 metal buildings assembler skills for your resume and career

1. Hand Tools

Here's how metal buildings assemblers use hand tools:
  • Used various types of power hand tools and operated vehicles for quality control.
  • Routed cables and system assembly utilizing of power hand tools to fasten hardware.

2. Tape Measure

A tape measure is a thin, flexible strip of plastic or metal that can be rolled up when it is not being used. The tape measure has numbers marked on it linearly which is used for measuring length.

Here's how metal buildings assemblers use tape measure:
  • Learn custom column design, measure using calipers / tape measure.
  • Use of tools and reading a tape measure.

3. Safety Policies

Safety policies are the rules and codes of conduct developed by an organization to ensure workplace safety.

Here's how metal buildings assemblers use safety policies:
  • Performed all duties according to established company safety policies, including strict adherence to all OSHA guidelines ensuring zero safety violations.
  • Observed all safety policies and procedures Recognized and reported defective material and equipment to shift supervisor.

4. Air Tools

Here's how metal buildings assemblers use air tools:
  • Analyzed Failure Analysis logs to begin part repair then repaired parts utilizing various hand and air tools.
  • Used additional air tools to assemble components as necessary (drills, tack guns, etc.)

5. Control Panels

A control panel is a flat, enclosed unit, often the vertical part of a system in which the control or monitoring instruments are displayed and accessible to users. Control panels are typically closed-circuit boards with connections to all peripheral devices in their area. They can be found in factories to monitor and control machines or production lines and in places like nuclear power plants, ships, airplanes, and mainframe computers.

Here's how metal buildings assemblers use control panels:
  • Build control panels and install all devices Install all conduit wiring and control devices for a raw material conveyor system
  • Panel Assembler- responsible for assembling industrial control panels according to blueprints provided by engineers for the application that customers required.

6. Quality Checks

Quality checks are a component of quality control aimed at ensuring that quality requirements are met. Internally, quality checks provide assurance to managers, and externally, it provides assurance to clients, federal departments, authorities, and certifiers.

Here's how metal buildings assemblers use quality checks:
  • Assembled various products according to specifications* Ensured accuracy and efficiency of work* Dissembled products* Performed quality checks on products and parts
  • Prepared daily quality check reports to supervisors and provide monthly quality control analysis.

Choose from 10+ customizable metal buildings assembler resume templates

Build a professional metal buildings assembler resume in minutes. Our AI resume writing assistant will guide you through every step of the process, and you can choose from 10+ resume templates to create your metal buildings assembler resume.

7. Customer Specifications

A Customer Specification is a document that describes the general requirement of an expected service from a contractor. It outlines the key requirements of the customer. Customer specifications should be written in simple and general language so that the contractor clearly understands the expectations of the customer. It is also known as a User Specification.

Here's how metal buildings assemblers use customer specifications:
  • Work with other quality personnel in obtaining goals of meeting or exceeding customer specifications while meeting target costs and customer expectations.
  • Worked closely with customer inventory control specialists to ensure that all materials maintained at job site complied with customer specifications.

8. Blueprint Specifications

Blueprints are layouts or designs about the construction of a building or structure. It consists of accurate engineering drawing on light-sensitive sheets allowing to create copies easily.

Here's how metal buildings assemblers use blueprint specifications:
  • Follow written instructions and read and apply blueprint specifications.-Check parts for conformance to specifications.
  • Promoted to Parts Inspector, verifying quality and conformity to military blueprint specifications.

9. Clean Rooms

As the name suggests, clean rooms are scientifically cleansed from microbes, dirt particles, and many other pollutants. It has a shallow level of external particles and is useful in the manufacturing and engineering of products. Since chemical reactions and scientific procedures can be affected by outside factors, they provide dirt and an interaction-free environment where scientific manufacturing can occur. Clean rooms are beneficial in various industries, including the aerospace, optics, and nanotechnology industries.

Here's how metal buildings assemblers use clean rooms:
  • Dry, peels test, final inspect, and pack catheters in clean room.

10. Nail Guns

A nail gun is a tool used in driving nails into wood. It has become a choice for many builders replacing hammers.

Here's how metal buildings assemblers use nail guns:
  • Used various nail guns, drills, staplers to build unfinished furniture.
  • Used different staple and nail guns.

11. Electrical Components

Here's how metal buildings assemblers use electrical components:
  • Assigned to John Deere Manufacturing as an assembler responsible for installing electrical components on an assembly line for their riding lawnmowers
  • Developed an understanding of various mechanical and electrical components and processes while manufacturing various types of projectors.

12. Quality Products

A quality product satisfies the client's intended need and matches the cost the consumer paid for it.

Here's how metal buildings assemblers use quality products:
  • Perform final checks and adjustments for any defects to ensure high quality products.
  • Produce quality products that meet the customer's specifications.

13. CNC

CNC stands for Computer Numerical Control. It is a subtractive manufacturing technique that usually uses computerized controls and machine tools to strip layers of material from a stock piece.

Here's how metal buildings assemblers use cnc:
  • Repaired shipping crates Maintained work area CNC machine operator
  • Help with set ups along with operating and maintaining CNC machines.

14. IPC

IPC, Infection Prevention and Control is a practical, evidence-based approach that aids the prevention, transmission, or control of the spread of infections in patients and health workers.

Here's how metal buildings assemblers use ipc:
  • Perform Visual Inspections on products and perform quality control audits based on IPC-600 and IPC-610 and IPC 620 standards.
  • Performed solder inspection per IPC 610 criteria.

15. Circuit Boards

A circuit board refers to an electronic device used to offer mechanical support and connect components electrically using signal traces and conductive pathways.

Here's how metal buildings assemblers use circuit boards:
  • Assemble wide variety of circuit boards and machines Program circuits Other duties as assigned
  • Assembled wire harnesses for heavy machinery including airplane navigation systems Executed in-circuit tests Repaired Printed Circuit Boards (PCBs) as needed
top-skills

What skills help Metal Buildings Assemblers find jobs?

Tell us what job you are looking for, we’ll show you what skills employers want.

List of metal buildings assembler skills to add to your resume

Metal buildings assembler skills

The most important skills for a metal buildings assembler resume and required skills for a metal buildings assembler to have include:

  • Hand Tools
  • Tape Measure
  • Safety Policies
  • Air Tools
  • Control Panels
  • Quality Checks
  • Customer Specifications
  • Blueprint Specifications
  • Clean Rooms
  • Nail Guns
  • Electrical Components
  • Quality Products
  • CNC
  • IPC
  • Circuit Boards
  • Customer Orders
  • Quality Standards
  • Mechanical Assembly
  • Troubleshoot
  • Structural Components

Updated January 8, 2025

Zippia Research Team
Zippia Team

Editorial Staff

The Zippia Research Team has spent countless hours reviewing resumes, job postings, and government data to determine what goes into getting a job in each phase of life. Professional writers and data scientists comprise the Zippia Research Team.

Updated January 8, 2025

Browse production and manufacturing jobs