National Technologies jobs in Oak Creek, WI - 2450 jobs

This role is not open for submissions from outside staffing agencies Safety Manager Trulite is GROWING! We are looking for Safety Manager to be based at our New Berlin, WI location. The Safety Manager is responsible for the Environmental, Health, and Safety programs related to OSHA, EPA, and other regulatory agencies for the entire plant location. $70,000-$80,000 Who You Are: You are willing to work hand in hand with other plant management to develop and deliver plant safety reports and statistics and provide leadership and development regarding environmental health and safety matters. You will maintain records, development of recordable incident investigation and information for corporate conference calls, development of corrective action plans to prevent reoccurring problems, etc. Skills You Bring: BS Degree in Safety or equivalent or two years' experience as a safety professional or a combination of both OSHA 30 preferred Good written and verbal communication skills A team player Must be able to train other employees effectively Experience working with quality systems is preferred What You Will Be Doing: This position is hands on and requires you to spend 90% of your time on the production floor Directs the organization's safety programs to protect employees and maintain safe working conditions. Facilitates monthly safety committee meeting and develops weekly toolbox talks and monthly safety trainings per OSHA and company's yearly training structure Formulates and suggests work safety standards Risk prevention areas include hazardous materials exposure, accidents, ergonomic concerns, and other unsafe conditions Meets compliance and reporting requirements of federal or state regulations. Performs New Hire Safety Orientations and other safety training and maintains appropriate records Assists with investigations of incidents, accidents, complaints, and cases of ill health. Assists with risk assessments and site inspections. Coordinates yearly OSHA audits with state and corporate partners Works with management and maintenance to ensure equipment is installed correctly/safely as well as assists with ensuring maintenance of equipment is up to date and scheduled accordingly Keeps all environmental tasks up to date per state, federal, and company standards. Applies for permits and does necessary inspections/tests per branch environmental plans. Updates share point site to status of environmental compliance Schedules and ensures yearly emergency action plan drills are scheduled and completed Evaluates and coordinates purchasing of personal protection equipment as well as coordinates the plant's safety shoe and prescription eyewear program Continues efforts towards INSHARP and VIPP Certifications for the branch Why Trulite: Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if injured on the job. We are pleased to offer a comprehensive wellness initiative that includes access to a percentage of your pay daily, if needed, and a progressive financial training program. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100% improving your financial health. Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence. We are an Equal Opportunity And E-Verify Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.

Wisconsin Building Supply operates locations throughout Wisconsin supplying windows, doors, roofing, siding, millwork, builders hardware, columns, trim, mouldings, cabinetry, countertops, decking, railing, gypsum, lumber & plywood, insulation, and additional building materials. A Brief Overview The CDL Driver I is responsible for the safe, efficient transportation of materials to various job sites and other locations. This role requires maintaining a Class A or B Driver's license, inspecting and maintaining trucks, reporting shortages and claims to supervisors, and assisting in loading and storing of materials. Drivers must perform pre- and post-trip inspections, manage logs, and adhere to hours-of-service requirements. Pay Range: $22.00-$27.00/hr. What you will do Operates Class A or B commercial vehicles in a safe, compliant, and efficient manner. Responsible for deliveries to both active construction sites and completed build locations; city-based deliveries and inter-state travel may be required. Performs thorough pre-trip and post-trip DOT inspections to ensure vehicle safety and compliance with federal regulations. Provides exceptional customer service by maintaining a professional demeanor, addressing client needs, representing the company positively during all interactions, and relaying messages received from customers while on job sites. Organizes and secures loads to ensure safe transport and verifies orders for accuracy before departure and upon delivery. Adheres to all regulations and safety guidelines established by the U.S. Department of Transportation (DOT) and complies with all regulations and conditions outlined in applicable permits. Prepares and maintains accurate DOT-compliant logs of driving hours, on-duty time, and rest periods in accordance with federal regulations. Delivers and unloads materials accurately and safely, ensuring customer satisfaction at the point of delivery. Records all merchandise returned by truck and assists in unloading materials returned for credit, ensuring proper documentation and handling. Safely and efficiently operates a truck-mounted forklift to load, unload, and transport materials at job sites. Maintains the cleanliness and organization of the truck, ensuring it is well-kept and ready for operation. Assist with stocking and organizing inventory in the warehouse and production areas. Required For All Jobs Perform other duties as assigned. Comply with all policies and standards. Adheres to Company's commitment to workplace safety. Education Qualifications High School Diploma or GED required. Experience Qualifications Basic CDL experience with flat beds and/or tractor trailers required. 1-2 years CDL experience preferred. Experience transporting and handling lumber and building materials required. Skills and Abilities Ability to do basic math, read orders, write instructions and complete forms. Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. Ability to deal constructively with conflict and recognize potential problems. Maintain current operator's license and meet company driver qualification requirements. Knowledge and ability to use safe lifting techniques. Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Ability to collaborate effectively with staff, dispatchers, and other drivers to ensure smooth operations and timely deliveries. Knowledge and understanding of federal DOT regulations, logbook requirements, and HOS compliance. Licenses and Certifications Class A CDL License or Class B CDL License required. For Boom Crane CDL Driver positions - a Certified Drill Rig Operator-NCCCO Boom Certification preferred - maintain active accredited certification for equipment type (e.g. NCCCO, NCCER, CIC) preferred. Additional Potential Opportunities based on experience: CDL Driver II CDL Long haul CDL Wide Load CDL Driver Boom Crane Wisconsin Building Supply, a Division of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

ABOUT DREXEL Drexel Building Supply is a leading provider of quality building materials and services to professional contractors and homeowners throughout Wisconsin. Team Member owned and community-driven, we proudly operate six Drexel retail locations and three Drexel manufacturing locations across Wisconsin. We align our entire team around one mission: Supply. Happiness. We live and operate around our 11 core values, and these values are the backbone of what drives our team to success. Our core values exemplify the DNA of Team Blue! Join us in our mission and see for yourself why Drexel has been named a Wisconsin Top Workplace every year since 2011 and a USA Top Workplace in 2023! YOUR RESPONSIBILITIES Serious ambition welcome. Join our mission to supply happiness to clients, communities, and your team members throughout Wisconsin. This is a fabricator position! Bring your passion and determination and get ready for some fun! Here are the details. Assemble Walls, Floors, Stairs, and other building components Stacking/loading of Wall, Floors, Stairs, and other building components Shape or cut materials to specified measurements, using hand tools, machines and/or power saws Read and interpret drawings and build to specifications provided May operate forklift to handle and load material for the production saws and production lines All other duties as assigned YOUR PRIOR WORK EXPERIENCE Experience with hand and power tools Experience with reading building plans Reading and understanding of tape measure Your background involves putting customers first You have been a HUGE contributor to the success of a team You are uniquely you and bring something to the table that no one else can You have done some great things that don't necessarily fall into the career path above but that's what makes you cool! Tell us why you would be great for this job anyway...market yourself to us! Are you able to fulfill all the requirements? We are sure you don't. You should apply anyway! We have the best training facilities and mentors anywhere. We can train you if you have the right personality. FULL TIME TEAM MEMBER BENEFITS: Insurance - Medical, Dental, Vision Employee Assistance Program 401k ESOP Shares Profit Sharing Immediate Holiday and Vacation Pay Team Member Product Discount Scholarship Program for the kids of Drexel team members Annual Charity Match Donation Annual reimbursements to spend on family and fitness Birthday PTO and many more fun little perks! PM85 Requirements: PI01f200ef818d-37***********5

AMS Industries, Inc. is a MEP+ contracting firm serving the commercial, industrial, refrigeration and nuclear industries (PMT). With over 60 years of existence, AMS has grown from a small refrigeration contractor with a few employees to a multi-discipline and multi-market MEP contractor with more than 500 employees. We strive to meet our commitments to clients, develop our people and improve our communities. We are seeking a highly organized and detail-oriented Onsite Administrative Assistant to join our construction team. This position reports to the on-site Project Manager. The ideal candidate will be responsible for handling various administrative duties, signing in new hires, help coordinate orientation sessions, and assisting with safety compliance. This role is crucial in ensuring smooth operations and maintaining a safe working environment on the construction site. Responsibilities: Handle correspondence, filing, and documentation. Schedules and coordinates meetings, and appointments. Generates standardized reports as needed. Maintains and updates files, spreadsheets, and logs with current data. Distributes files, and logs as appropriate. Maintains electronic and hard copy filing system. Retrieves documents from the filing system. Communicates with various departments and other third parties to gather and provide information to assemble and prepare reports and documents. Processes entries and statistical information which could include expense reports, timesheets, GL entries, and spreadsheets. Performs general administrative and clerical functions such as copying, printing, scanning, filing, and faxing. Sign in new hires and ensure all necessary paperwork is completed. Verify employment eligibility and ensure all documentation is properly filed. Conduct orientation sessions for new hires, providing them with necessary information about site policies, procedures, and expectations. Coordinate and facilitate safety training sessions, ensuring all personnel are up to date with mandatory safety protocols. Maintain records of all training sessions and certifications. This position has no supervisory responsibilities. Qualifications: High school diploma or equivalent; associate's degree or relevant certification is a plus. Proven experience in an administrative role, preferably in a construction or industrial environment. Intermediate to advanced skills in Microsoft Word, Excel, PowerPoint, and Outlook is required for this position. Must be mature, professional, personable, and have a polished delivery on all assignments. Ability to handle confidential information with the utmost discretion. Must be able to communicate, both written and oral, in a professional manner and represent the company in a professional manner. Must possess good follow-through skills to finalize projects. Must have above-average proofreading skills and have a history of being accurate and thorough. What we offer: Health Insurance and ESOP (Employee owned) package. Health Reimbursement Arrangement (HRA) with Medical PPO FSA and Dependent Care 401K Matching Paid Maternity & Paternity Leave Generous PTO roll-over policy Social events and gatherings throughout the year

Jos. Schmitt Construction Company has been a trusted commercial, industrial and institutional construction partner since 1899, providing high-quality services for businesses throughout southeast Wisconsin. Job Description We are seeking an experienced and detail-oriented Estimator to join our commercial construction team. As an Estimator, you will be responsible for preparing accurate and competitive cost estimates for commercial construction projects, from the initial concept to the completion stage. You will collaborate with project managers, architects, engineers, and subcontractors to gather and analyze project data, ensuring that all cost components are considered to provide comprehensive, precise bids. The ideal candidate will have a deep understanding of construction processes, materials, labor, and market conditions, along with strong analytical and communication skills. Job Requirements and Duties Cost Estimation: Prepare detailed cost estimates for commercial construction projects, including labor, materials, equipment, overhead, and profit margins. Ensure estimates are accurate and competitive. Project Scope Analysis: Analyze blueprints, specifications, and project documents to determine the scope of work, material requirements, and labor costs. Review project plans and drawings with architects, engineers, and other stakeholders to clarify specifications and resolve discrepancies. Material and Labor Cost Analysis: Research and source material prices, labor rates, and equipment rental costs. Maintain relationships with suppliers and subcontractors to stay up-to-date with pricing trends and changes. Bid Preparation: Prepare and submit bids for commercial projects, ensuring all necessary details, terms, and conditions are included. Work with the project manager and other stakeholders to review and finalize bids before submission. Subcontractor Coordination: Solicit and evaluate bids from subcontractors for specialized work, including electrical, plumbing, HVAC, and other trades. Ensure that subcontractor bids are accurate, complete, and aligned with project requirements. Budget Management: Develop and manage project budgets, ensuring costs stay within the estimated scope. Monitor expenditures and adjust cost estimates as needed throughout the project lifecycle. Risk Analysis: Identify potential risks and budget contingencies related to project scope, site conditions, and unforeseen challenges. Advise management on potential cost-saving strategies and risks. Tender and Proposal Management: Assist in the preparation of tender documents, proposals, and contract negotiations, ensuring compliance with project requirements and regulations. Collaboration with Project Team: Work closely with project managers, architects, and engineers to understand the requirements and limitations of each project, providing input on cost-effective solutions and construction techniques. Continuous Improvement: Continuously monitor industry trends, best practices, and technological advancements to improve the accuracy and efficiency of cost estimation processes. Job Qualifications Experience: Minimum of 3-5 years of experience as an Estimator in commercial construction. Experience estimating various types of commercial projects (e.g., office buildings, retail spaces, industrial sites) is required. Education: Bachelor's degree in Construction Management, Civil Engineering, Architecture, or a related field. Alternatively, significant practical experience in construction estimating may substitute for formal education. Technical Skills Proficiency in estimating software (e.g., ProEst, Buildertrend, Bluebeam, or similar). Strong knowledge of construction materials, methods, and techniques. Ability to analyze blueprints, technical drawings, and specifications. Mathematical Skills: Strong ability to perform complex mathematical calculations related to costs, quantities, and measurements. Attention to Detail: High level of accuracy in cost estimation, with the ability to identify and correct potential discrepancies. Communication Skills: Excellent verbal and written communication skills. Ability to present cost estimates and project proposals clearly and confidently to clients, contractors, and team members. Project Management Understanding: Knowledge of project management processes, including timeline management, procurement, and budget monitoring. Time Management: Ability to manage multiple projects simultaneously, prioritize tasks, and meet tight deadlines. Certifications (optional): Certifications such as the Associate Estimating Professional (AEP), Certified Professional Estimator (CPE), or similar industry certifications are a plus. Collaboration Skills: Ability to work collaboratively with project managers, subcontractors, suppliers, and clients to ensure the best project outcomes.

Improving America's infrastructure isn't for the weak. It takes grit, determination, and hard work to execute high impact projects. Michels Corporation engages 8,000 people and 18,000 pieces of heavy equipment in our insatiable drive to be the best. Our work improves lives. Find out how a career as an Application Administrator can change yours. As an Application Administrator, you will support the technical planning, deployment, and support of non-enterprise applications including the related licensing administration within Michels Corporation. In addition, you will focus on the server application installation, configuration, and maintenance while ensuring proactive monitoring and application performance. Critical for success are professional management and communication skills. Why Michels? We are consistently ranked among the top 10% of Engineering News-Record's Top 400 Contractors Our steady, strategic growth revolves around a commitment to quality We are family owned and operated We invest an average of $5,000 per employee on training each year We reward hard work and dedication with limitless opportunities We believe it is everyone's responsibility to promote safety, regardless of job titles. We offer a comprehensive benefits program, including Health, Dental, Life, Flexible Spending Accounts, Health Savings Account, Short Term and Long-Term Disability Insurance, 401(k) plan, Legal Plan, and Identity Theft and Monitoring Plan. Depending on your positions and location you may participate in a different benefit plan. Why you? You thrive in fast-paced environments under tight deadlines You relish new challenges and evolving technology You enjoy collaborating and communicating with your teammates You like to know your efforts are noticed and appreciated You have strong communication skills You deliver exemplary customer service through interactions with others What it takes: Bachelor's or associate degree in computer science or related field and 3-5 years relevant experience, or equivalent combination 1-3 Years Microsoft Server Administration experience Experience with Microsoft System Center/Configuration Manager Familiar with MS SQL and PowerShell Familiar with Citrix Xen Application software deployment (desired)

ABOUT DREXEL Drexel Building Supply is a leading provider of quality building materials and services to professional contractors and homeowners throughout Wisconsin. Team Member-owned and community-driven, we proudly operate six Drexel retail locations and three Drexel manufacturing locations across Wisconsin. We align our entire team around one mission: Supply. Happiness. ABOUT THE ROLE We are looking for a Yard Setup Team Member to join our Team! A Yard Setup Team Member will be responsible for the execution of projects within our lumber yards. This can range from executing a plan with a full yard layout and revamp to moving product racking to make the space more efficient, safer, and workable. The Yard Setup Team will work closely as a Team and travel to different Drexel locations (Wisconsin) based on current projects. The Team must also be willing to be all-in and help our Operations and Delivery Teams as needed, but the primary focus will be the execution of yard setup and yard projects. Responsibilities From Dirt to Done: You'll execute "Ground-Up" yard setups making sure every bin and rack is perfectly placed for Day 1 success. The Heavy Lifter: You'll own the physical transitions-tearing down, moving, and installing heavy-duty cantilever and pallet racking. It's like LEGOs, but much bigger and way heavier. The "Pull the Rope" Pro: When the pressure is on, you're in the trenches. Whether it's helping with a massive delivery or crushing a yard task, you do whatever it takes to help the team win. Skills & Qualifications Certified Pilot (Almost): You're already a pro on a forklift and reach truck, or you're ready to learn. You're also handy with power tools and aren't afraid to use them. Weather-Proof: You've got the stamina to be on your feet all day. Rain, shine, or "Wisconsin Cold"-you're out there making it happen and moving the heavy stuff. Road Warrior Spirit: You love a change of scenery and are ready to head out to different Drexel locations to leave your mark on every yard you touch. Tell us why you would be great for this job anyway! You're a great fit if you love the satisfaction of a 'Before & After' photo, you aren't afraid to get your hands dirty, and you thrive in an environment where no two days look the same. FULL-TIME PERKS AND BENEFITS Insurance - Medical, Dental, Vision Employee Assistance Program 401k ESOP Shares Profit Sharing Immediate Holiday and Vacation Pay Team Member Product Discount Scholarship Program for the kids of Drexel Team Members Annual Charity Match Donation Annual reimbursement to spend on fitness Birthday PTO and many more fun little perks! PM85 Requirements: PI65765202a662-37***********2

We are looking for 3rd shift availability. Shift hours are Friday through Sunday 5am to 5pm. • Coordinate between Veritas Steel Production and DOT Inspectors to ensure DOT witnessing of production operations and QC hold points are being completed. • Perform visual inspection of material as required. • Perform layout checks as needed. • Perform rotational capacity tests on bolts prior to use in shop. • Work with outside inspectors to resolve quality issues on the floor. • Monitor welder qualification tests. • Monitor and record welding parameters to insure compliance to approved WPS. • Be able to read and understand the Welding code and Specifications. • Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed. • Develop improvements in the quality control process to facilitate flow of work through shop. Primary Responsibilities: How will you accomplish the Objectives? • Perform in a manner that will assure quality work flowing through the shop. • Work with welders and leadmen to maintain quality. • Be available, by use of a radio, etc. to perform needed checks. • Maintain a log of work done, and complete required reports. • Interpret the Specifications and applicable Codes. • Ability to be flexible to work either early or late within assigned shift as needed. • Coordinate inspection of QC hold points between production and DOT Inspectors. • Use and encourage safe working habits. Must have CWI Certification NACE or BCI Certification is desired Ability to be conscious of Specifications and Company standards Ability to be organized and precise in maintaining a diary and reports Must have good people skills in dealing with difficult situations Ambitious person to help meet department and company goals and schedule. Competencies/Skills To perform the responsibilities, you must have the ability and skills to: • Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules. • Coordinate your work with shipping department to assure loads have been inspected and ready to ship. • Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop. • General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed. Measures of Success: Objective facts that demonstrate great performance. • Outstanding work record, great attendance record and always-on time. • No accidents. A safe worker is an asset to both their fellow worker and the company. • Increase throughput in the area that work being performed being able to streamline the required work and constantly making positive improvements. • Accept positive feedback from fellow workers and supervisors, on performance and competencies. HOURS - Friday - Sunday 5am - 5pm

Improving America's infrastructure isn't for the weak. It takes grit, determination, and hard work to execute high impact projects. Michels Corporation engages 8,000 people and 18,000 pieces of heavy equipment in our insatiable drive to be the best. We have a diverse market footprint within the US and across the globe. Our work improves lives. Find out how a career as a Senior Financial Planning Analyst can change yours. The Senior Financial Planning Analyst plays a pivotal role in strengthening the global Finance value chain across the Michels family of companies. This position requires deep expertise in financial reporting, including interpreting financial statements and analyzing key financial and operational metrics. Success in this role hinges on the ability to manage multiple projects and priorities, maintain exceptional attention to detail, communicate complex financial concepts to non-financial stakeholders, and demonstrate strong analytical and problem-solving skills. Why Michels? We are consistently ranked among the top 10% of Engineering News-Record's Top 400 Contractors Our steady, strategic growth revolves around a commitment to quality We are family owned and operated We invest an average of $5,000 per employee on training each year We reward hard work and dedication with limitless opportunities We believe it is everyone's responsibility to promote safety, regardless of job titles. We offer a comprehensive benefits program, including Health, Dental, Life, Flexible Spending Accounts, Health Savings Account, Short Term and Long-Term Disability Insurance, 401(k) plan, Legal Plan, and Identity Theft and Monitoring Plan. Depending on your position and location you may participate in a different benefit plan. Why You? Assist in the assembly and analysis of monthly financial performance Recognize and resolve discrepancies issues in financial data, taking the initiative to ensure reports stay accurate and reliable Coordinate business performance updates, management results presentations, and standardized reporting Working with finance leaders to establish analytics, benchmarking, and financial modeling to uncover opportunities for performance improvement Collaborate across the business to assist in forecasting, tracking KPIs, and supporting forward-looking financial planning Connect with other finance team members to share ideas, learn, and support each other's growth What it takes: Bachelor's Degree (or equivalent) in Accounting, Finance, or related field 5+ years of progressive financial management experience Strong analytical skills, research capabilities and overall business acumen Excellent communicator with the ability to actively listen and clearly convey key messages Proficiency with Microsoft Office Suite Applications (Word, Excel, PowerPoint, Outlook) Project experience and business consultant skills are (desired) Experience working on project teams comprising at least three-four individuals is (desired) Experience with Power BI and ERP (desired)

AMS Industries, Inc. is a MEP+ contracting firm serving the commercial, industrial, refrigeration and nuclear industries (PMT). With over 60 years of existence, AMS has grown from a small refrigeration contractor with a few employees to a multi-discipline and multi-market MEP contractor with more than 500 employees. We strive to meet our commitments to clients, develop our people and improve our communities. The Onsite Project Manager will oversee the successful delivery of highly complex mechanical and MEP systems. This position requires an individual with expertise in design/engineering coordination, estimating, construction management, and strong client-facing communication. The Onsite Project Manager will serve as the primary point of contact between the field, subcontractors, and client representatives, ensuring the project is delivered safely, on time, and within budget. Responsibilities: Manage the full project lifecycle onsite, from planning through closeout, with a focus on mission critical standards, reliability, and uptime requirements. Coordinate daily with field superintendents, foremen, subcontractors, and client representatives to ensure seamless execution of work. Interpret and communicate plans, specifications, and technical documents into actionable field tasks. Monitor and track project schedules, costs, manpower, and equipment to meet project deadlines and financial objectives. Prepare and manage RFIs, submittals, purchase orders, change orders, and progress billings. Evaluate and negotiate subcontractor and vendor quotations to ensure scope alignment and best value. Ensure strict adherence to quality assurance, safety, and compliance standards, especially those specific to mission critical environments. Lead onsite project meetings and provide accurate reporting to both internal leadership and client stakeholders. Identify risks and proactively implement strategies to resolve issues before they impact project performance. Qualifications: Bachelor's degree in Construction Management, Mechanical Engineering, or related field, or equivalent experience. 5+ years of project management experience in HVAC/MEP construction, with at least 2 years supporting mission critical or large-scale commercial projects preferred. Strong understanding of construction logistics, job cost accounting, and project financials. Proven ability to build and manage relationships with clients, subcontractors, and internal teams. Excellent written and verbal communication skills, with strong organizational and problem-solving abilities. Proficiency with Microsoft Office (Excel, Word, Project) and familiarity with construction management software (e.g., Autodesk Build, Spectrum ERP, or equivalent). What we offer: Health Insurance and ESOP (Employee owned) package. Health Reimbursement Arrangement (HRA) with Medical PPO FSA and Dependent Care 401K Matching Paid Maternity & Paternity Leave Generous PTO roll-over policy Social events and outings throughout the year

We are looking for an experienced Production Supervisor to lead several departments on 2nd shift. You'll guarantee that manufacturing remains a smooth and efficient process by monitoring employees and organizing workflows. In a fast-paced environment like production, the supervisor is an integral part of the process. The goal is to ensure that the production process efficiently delivers products of exceptional quality. Duties and Responsibilities: Meet all production key performance indicators, including safety, the daily production demand schedule and product quality. Recommend improvements to meet and exceed KPIs. Set daily/weekly goals and communicate them to employees. Analyze and resolve production issues with hands-on, mentoring approach. Setup work centers to guarantee a successful handoff between shifts. Assign responsibilities to employees. Work with scheduling to optimize production. Oversee and coach employees. Train, monitor and enforce the safe use of equipment. Enforce all safety rules and company standards. Ensure the completion of all required production paperwork, records and other documentation. Occasional supervision on other shifts. Skillsets Required: Analytical skills to monitor production output and check for compliance with specifications. Critical thinking and problem-solving skills, including the ability to spot issues in efficiency/productivity and suggest improvements. Strong coaching and training skills to drive employee development and proper decision-making. Good mechanical aptitude to aid in troubleshooting. Outstanding organization and leadership abilities. Strong communication and interpersonal skills. Strong work ethic - self-motivated and results-driven. Job Requirements: Technical Diploma, Associates degree or commensurate experience in supervision required. 3 years of Production Supervisor experience or 5 years of industrial manufacturing experience required; direct plastic experience preferred. Excellent computer skills, including Microsoft Office. Knowledge of J.D. Edwards preferred. Ability to lift or carry 50 pounds. Ability to differentiate colors Pre-employment drug screen and background check will be required upon job offer. VPI Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Overview Pay: $27. 12 - $33. 90 Hourly Summary: Plant Maintenance installs, maintains, and repairs machinery, equipment, physical structures, and pipe and electrical systems in industrial establishments. Principal Duties and Responsibilities: Maintenance Duties: • Visually inspect and test machinery and equipment • Listen for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine • Dismantle defective machines and equipment and install new or repair parts • Cleans and lubricates shafts, bearings, gears, and other parts of machinery • Lay out, assemble, install, and maintain water pipe systems and related hydraulic and pneumatic equipment, and repair and replace gauges, valves, pressure regulators, and related equipment • Repair and maintain physical structure of establishment using welders, cutting torches, hammers, chop saw, drills, wrenches, and impact guns • Operate cutting torch or welding equipment to cut or join metal parts • Fabricate and repair counters, benches, partitions, and other wooden structures • Responsible for the preventative maintenance for all the equipment in the plant, including building preventative maintenance, such as drives, belts, filters, and motors • Troubleshoot and replace defective electrical apparatus, such as switches, relays, motors, and electrical and electronic components of machinery equipment • Responsible for ordering and/or notifying the designated person to order the parts related to maintenance. • Minor repairs on forklifts, front-end loaders, tractors and trailers • Comply with all safety protocols, including lock out/tag out Global Responsibilities: • Regular attendance and physical presence at work is an essential function of this position • This job may require additional duties not listed above and the employee may be asked to perform those duties to meet business needs Qualifications: Education/Specialized Knowledge/Professional Certifications: • High School Diploma or equivalent required • Welding, cutting torch, and fabricating experience with metal required • Possession of a Class A or B CDL preferred • Basic electric wiring abilities preferred • Use of an air compressor, other power tools, and some minor construction equipment • Completion of a company DOT physical examination and applicable drug testing Experience: • Mechanical experience preferred Skills/Abilities: • Must be willing and able to climb up, and work at 100 feet above ground; such as on top of silos, or in a manlift bucket • Ability to communicate with multiple individuals, including management • Work independently and with the assistance of others • Familiarity with tools and how things work • Promote, demonstrate, and abide by all safety procedures Working Conditions: • Operation within a fast-paced environment • Exposed to moving mechanical parts, vehicles, heavy construction equipment, toxic or caustic chemicals, and outside weather conditions • Noise level is usually moderate, but can be high and requires personal hearing protection on occasion at job sites, plants and laboratories-proper usage of PPE for certain jobs may be required • Must be able to work through stressful situations while maintaining professionalism and composure • Travel required Physical Requirements: • Regularly required to talk or hear; frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms • Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl • Must be able to stand and move about job sites with uneven and unpaved ground while managing concrete delivery onsite • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus • Must be able to frequently bend in order to obtain samples from stockpiles or ground, climb ladders with buckets of admixtures, and push wheelbarrows of concrete • Must be able to operate buttons, levers, and other controls located on various equipment • Must be able to work long and flexible hours as necessary • Must be able to maneuver in and around our plants, yards and jobsites as necessary • Lift/Carry up to 55 pounds frequently • Lift up to 100 pounds occasionally Benefits Information: In alignment with our Bargaining Agreement, we are proud to partner with our Union representatives to provide a benefits package that is both competitive and tailored to meet the needs of our employees and their families. These thoughtfully designed plans typically include: • Health Insurance - Supporting your overall wellness. • Dental and Vision Coverage - Ensuring comprehensive care for you and your loved ones. • Voluntary Benefits - Helping you to cover unexpected expenses. • Retirement Plans - Helping you prepare for a secure and peaceful future. • Paid Time Off and Holiday Pay - Giving you time to recharge and enjoy life's moments. At Ozinga, we believe in creating a workplace where every co-worker feels valued and supported. Join us and experience the difference of working for a company that truly cares! Ozinga is an Equal Opportunity Employer. We consider applications for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, sexual orientation, citizenship status, genetic information, or any other legally protected status.

```html About the Company NAES is seeking a Combustion Turbine Technician to support operations at a Simple Cycle combustion turbine facility in Neenah, Wisconsin. The Technician will be responsible for performing a wide range of duties related to the safe and reliable operation, inspection, and maintenance of combustion turbine systems, with an emphasis on electrical and instrumentation/control (I&C) systems. The ideal candidate will bring a strong electrical background and a collaborative, safety-first mindset to support power generation operations in compliance with regulatory and company standards. About the Role The Combustion Turbine Technician will support operations at a Simple Cycle combustion turbine facilities in Sheboygan & Neenah, Wisconsin. There are TWO DIRECT Hire Positions and relocation assistance is provided to the right candidate Responsibilities Operate and monitor combustion turbines and auxiliary equipment in accordance with safety and environmental regulations. Perform troubleshooting, repairs, and routine maintenance on electrical and I&C systems. Conduct inspections and preventative maintenance using Maximo or similar CMMS systems. Calibrate and maintain instrumentation, control systems, and performance monitoring equipment. Maintain accurate logs of plant operations, equipment conditions, and maintenance activities. Support water treatment operations, including chemical handling and system performance testing. Operate mobile and heavy equipment to assist with maintenance activities. Collaborate with internal teams and contractors during equipment installation and repairs. Perform light welding and mechanical repairs as needed. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain plant cleanliness and adhere to all safety policies and procedures. Provide support to other generating facilities as required. Qualifications Associate Degree in Electrical, Mechanical, or Instrumentation & Control Technology required. 4+ years experience in electrical, mechanical, or I&C trades, OR 2+ years of experience in combustion turbine operations and maintenance. Completed apprenticeship in a related trade is a plus. Demonstrated up-to-date electrical or I&C field experience is required. Required Skills Strong background in electrical or instrumentation and control (I&C) systems. Familiarity with combustion turbine operation and maintenance. Ability to read and interpret blueprints, diagrams, and specifications. Demonstrated mechanical and/or electrical aptitude. High level of personal and technical responsibility. Ability to work independently or as part of a collaborative team. Valid driver's license required. Must reside within 60 minutes of the Neenah Generating facility per company policy. Preferred Skills Completed apprenticeship in a related trade is a plus. Pay range and compensation package Compensation details are not specified in the provided job description. Equal Opportunity Statement NAES is committed to diversity and inclusivity in the workplace. ```

Weather Shield, now a part of the Pella Family of Brands, is seeking an Engineering Specialist to join the team. In this role you will join a cross-functional engineering team focused on the development and implementation of products, processes and tooling to build windows, doors, and related accessories. This is an onsite role that reports to our Medford, WI office. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned Defines overall print and documentation structure for new product lines. Applies advanced computer skills such as Solid Edge and CAD (both 2-D and 3-D systems) in the development and design of product components and or systems. Prepares layout, part, subassembly, and assembly models and drawings. Identifies design issues during model creation and assists engineering to develop creative solutions. Uses Excel to create part dimension tables and calculators for various product configurations. Assigns part numbers per established guidelines. Prepares change orders and manages approval process. Develops matrix bill of materials by understanding the product design, interpreting engineering print structure, and translating to the flat BOM format. Communicates BOM information to IT team for systems loading and manages subsequent communication and updates. Assigns component costs based on input from supply management, manufacturing, and engineering, and creates overall product material cost estimates. Develops / owns / coordinates PIT (Part Information Tracking) data. Communicates and works with external vendors. Tracks the status of quoting, producibility, PPAP, and initial production shipments of new components. Works with supply management, product management, process design, product design and plant teams to determine material inventory attributes such as part lengths, make vs. buy, lead time, inventory location, etc. Participates in systems integration testing to validate BOM and Configuration rules prior to product launch. Works with internal and external testing facilities to evaluate product and component performance. Develops test plans, builds and/or acquires samples needed for testing, and communicates results. Assists with the execution of product certification plans which may include testing, summarizing of information, communication to certification and testing agencies, and updating/validation of internal information systems. Leads and/or participates in continuous improvement efforts and 3P events. Supports Ready-to-Serve product line sustainment activities such as BOM reviews, product re-certifications, answering customer service questions, etc. Develops estimates for time, cost, and quality for projects. Manages project details including task lists, timelines, and milestones. Designs, specifies and/or modifies tooling, fixtures, and machines that may be needed to support product changes. Performs logical reasoning and demonstrates proficiency in problem solving. Proficient in Excel, Word, Oracle, Outlook, etc. and has an aptitude to learn as technology evolves. Promotes safety through design and actions. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Associate Degree (A. A.) or equivalent from two-year college or technical school; Bachelor's degree (B.A.) from four-year college or university preferred; and six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. COMPUTER SKILLS Word, Excel, Power Point, CAD, 3-D Modeling, Oracle, Agile, and Solid Edge / Solid Works PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate.

Whether you're just beginning your career or have years of experience-you've come to the right place - Dynatect Manufacturing, Inc! Since 1945, Dynatect has been making products that add protection, safety, and security for other equipment manufacturers. Some of the industries include automation, medical, emergency vehicles, transportation, sports, machine tool, construction, and even movie props - like the bus bellow in the movie Dead Pool 2! Click HERE to see examples of our many processes, custom products, and applications. The Dynatect team enjoys a dynamic, clean, and safe work environment with excellent benefits including: 10-paid holidays every year Accrue PTO within weeks 401k match Tuition reimbursement $2,000 referral bonus In-house training and cross-training programs Career advancement See more of our benefit package on our Careers Page. A Day in the Life of a CNC Lathe/Mill Machinist: You will machine parts to meet Dynatect and customer specifications. You will write, edit, load and execute a CNC program. You will set up machines with minimal supervision and assistance upon completion of training. You need to meet required production and productivity targets. You will measure work pieces. You will maintain all tools and ensure they are in proper working order. You will ensure quality standards. All other duties as assigned. Why you? You thrive in a manufacturing environment. You enjoy collaborating and communicating with your teammates. You deliver quality craftsmanship products and take pride in the work you produce. You are reliable and come to work with a positive attitude. You work in a safe manner. You are willing to learn and grow in your career. What You Need: A high school diploma or equivalent. 2+ years' experience is preferred. Ability to use sound judgment and reasoning. Ability to program in M and G-code and conversational programming languages. Ability to prioritize, managing time and workload. To be able to read a ruler, tape measure, micrometers, calipers, etc. Ability to read and interpret part prints. To be able to frequently stand and walk. To be able to lift a minimum of 50 lbs. To be at least 18 years old. This Job Is: A job for which military experienced candidates are encouraged to apply! A good fit for applicants with gaps in their resume, or who have been out of the workforce for the past 6 months or more Open to applicants who do not have a college diploma Check out our Working at Dynatect page for more information on who we are, core values, our mission, and what it's like to work at Dynatect Manufacturing. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

AMS Industries, Inc. is a MEP+ contracting firm serving the commercial, industrial, refrigeration, and nuclear industries (PMT). With over 60 years of existence, AMS has grown from a small refrigeration contractor with a few employees to a multi-discipline and multi-market MEP contractor with more than 500 employees. We strive to meet our commitments to clients, develop our people and improve our communities. Located at our jobsite in Mt Pleasant, WI., the Assistant Project Manager (APM) will work closely with the Project Manager to support the profitability and quality execution of our commercial projects. This will require an individual that possesses multiple talents: design &engineering, estimating, project management, and entrepreneurial business skills. Responsibilities: Assist PM and Field Supervision to ensure installation occurs correctly. Take initiative to minimize systems re-work. Utilize training and knowledge garnered to date to further develop understanding of Mechanical Systems and utilize your still developing skill set to apply this knowledge of the system installed to assist Field Supervision and troubleshoot installations as necessary. Work closely with engineering group for development of Design-Build projects and manage documentation to prevent errors associated with this type of work. Utilize Project Documentation plan to manage and track Submittals, RFI's Current Project Specifications, and Current Project Plans. Maintain log of RFI's, Submittals, Drawings, and Issues both for Field use (iPad Management) and for Office use. Review and process returned documentation for Scope Compliance and distribute to relevant project stakeholders. Qualifications: College degree in Mechanical Engineering, Construction Management, or equivalent experience. 3+ years of experience in HVAC on the construction side including estimating, project management and business development. Strong communication and interpersonal skills. What we offer: Health Insurance and ESOP (Employee owned) package. Health Reimbursement Arrangement (HRA) with Medical PPO FSA and Dependent Care 401K Matching Paid Maternity & Paternity Leave Generous PTO roll-over policy Social events and outings throughout the year

The Electrical & Instrumentation Technician position and functional duties are to support the Core operations through assistance in maintenance, preventative maintenance and continuous improvements to the assets. Additionally, the Electrical & Instrumentation Technician will build capability in the maintenance department and operations with respect to technical aspects of the assets. Work Type: Full Time Growing Industry leading company with state of the art equipment Secure permanent employment with outstanding benefits The Electrical and Instrumentation Technician plays a critical role within in the maintenance operations. You will have a key focus on ensuring that all Electrical and Instrumentation/Controls maintenance and project related activities are being carried out efficiently and effectively across a broad range of fixed plant equipment. The role will play a critical part in supporting on-going operations and our continuous improvement efforts. The Position Description: Trade qualified electrician with instrumentation qualifications (both essential) or if you are a qualified electrician who is less than 12 months away from obtaining your instrumentation qualifications, then this would also be considered Performs the installation, repair, and preventative maintenance on a wide variety of electrical control systems, equipment, and components including, but not limited to, transformers, switchgear, bus bars, high and low voltage motors, and panel wiring. Installs, troubleshoots and performs preventative or scheduled maintenance for all electrical and control systems. Provides technical design input and equipment specification recommendations for pump houses, lift stations, and treatment plant system modifications. Documents work completed, work in progress, and annual permit requirements on computerized maintenance history records. Prepares and modifies as-built drawings for new and existing electrical systems and components. Provides maintenance support to Water Division and Wastewater Division staff for the operation and maintenance of the District's water and wastewater treatment plants and the water distribution and wastewater collection facilities. Performs electrical work including repairs to lighting fixtures, installs new switches and outlets, runs new circuits, control wiring and provides estimates for such works. Performs Programmable Logic Controller (PLC) Programming. Strong knowledge and ability in preventative maintenance processes and systems; also must possess PLC related skills including intermediate programming abilities. The ability to work successfully within a team environment and support the core operations through assistance in maintenance A strong understanding of OHSA standards within the work place Critical thinking/troubleshooting : using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Determining causes of operating errors and deciding what to do about it safely and in a reasonable amount of time. Disclaimer: The above statements are intended to describe the general details of the essential responsibilities being performed in the job. It is not designed to be a comprehensive list of all duties and responsibilities. All associates may be required to perform duties outside their normal responsibilities from time to time, as needed. The company reserves the right to make changes to the job description at any time.

Job Summary for Material Cycle Counter As a Materials Cycle Counter, you will completes cycle counting process, analyze discrepancies to determine problem causes and supports inventory management projects. Shift: 1st shift Opportunity 4am-12:30pm Wage: $19 doe Material Cycle Counter Key Responsibilities: Perform daily cycle counts of materials and update inventory records accordingly. Investigate and resolve any discrepancies between physical counts and system data. Collaborate with the warehouse team to ensure accurate material handling and reporting. Utilize inventory management software to track materials and ensure accurate data entry. Identify and report any potential issues with inventory discrepancies and recommend corrective actions. Use fork trucks and order picker to load or unload. Requirements Qualifications: Previous experience in inventory control or cycle counting preferred. Strong attention to detail and a high level of accuracy. Proficient in using inventory management systems and Microsoft Office Suite (Excel, Word, Outlook). Ability to lift and move products weighing up to 50 pounds. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Ability to work independently and manage time effectively. Parallel Employment is an Equal Opportunity Employer. Benefits To be discussed at time of hire We are an equal opportunity employer #ind456

All offers of employment by Milwaukee Valve Company, LLC. are contingent upon successful completion of a pre-employment drug screen, blood test, physical capabilities test, and background check, all with acceptable results. Applicants are responsible scheduling and completing the required drug screen, blood test, and physical capabilities test within 7 calendar days of offer acceptance. Milwaukee Valve Company is looking for a CNC Programmer to join our Prairie Du Sac, WI team in Department 301. This is an exempt position. Established in 1901, Milwaukee Valve manufactures valves for a variety of industries including Industrial, Commercial, Fire Protection, Marine and the dry bulk hauling industries. Our products have been installed on every U.S. Navy ship built for the last 60+ years. Our heritage, our people, and our passion is to be the best, and Milwaukee Valve is proud of its engineering excellence and its employees who take pride and dedication in their work. In return, Milwaukee Valve offers an excellent benefit package, competitive wages, and promotional opportunities including Health, Dental, Life and Disability Insurance options, Flex Spending, 401K with employer match, tuition assistance, paid time off, and shift premiums. For more information please navigate to: Our Homepage Machining Centers Tour Employee Testimonial Commercial Summary: As CNC Programmer the primary responsibilities will be the creation of CNC programs through the use of CAD/CAM software, general editors or manual entry of code on a controller. These programs run on a variety machine types, styles and controllers and have varying complexity. Other responsibilities will be to, perform program compare, maintain documents, conduct tool tests, recommend tools and fixtures, at times performing machine set up and program prove out including the measuring and inspection of the machined parts. The individual will at times be responsible for the instruction of properly performing the tasks related to machine set up. The CNC Programmer must be able to read, comprehend and follow work instructions and blueprints, they will demonstrate the precise use of instruments such as: Micrometer, Caliper, Height Stand, and Indicators, they will perform proper measurements of parts to .0001 and have an excellent understanding and working knowledge of GD&T with the ability to instruct in these tasks. All work is subject to final inspection and appraisal. Other duties may be assigned. Qualifications to perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to help individuals with disabilities to perform the essential functions. Education and/or Experience: High school diploma or general education degree (GED) Associate's degree (A. A.) or equivalent from two-year College or Technical school or Minimum 1 year related experience and/or training Language Skills: -Ability to communicate effectively with others at all levels with proper etiquette -Ability to read and interpret documents such as: -Safety policies and rules -Operating and maintenance instructions -Procedure manuals Reasoning Ability: -Ability to apply common sense understanding -Thoroughly carry out instructions given in oral, written or diagram form -Ability to deal effectively with routine problems and situations -Cost / profit consciousness and determining profitable outcome Attendance: -Is at work for scheduled hours Soft Skills: -Follows instructions -Responds to management's directions -Takes responsibility for own actions -Flexibility -Adjust to changing demands -Demonstrates consistent performance in all aspects of their work -Ability to recognize and solve problems before they arise -Ensure all documentation is complete and correct -Mentor and assist in training of employees -Develop constructive and cooperative working relationships with others and maintain them -Ability to accept of criticism and deal calmly and effectively with stressful situations Mathematical Skills: -Addition -Subtraction -Multiplication -Division -Geometry -Algebra -Trigonometry Calculations of such things as: -Speed (RPM / SFM) -Feed (IPM / IPR) -Chip Load -Angles -Ratios -Arc and Circles -Taper Programming Skills: -Analyzes drawings to best determine how to process component -Recommends machine type(s) for process -Determines cutter path(s) -Selection of cutting tools, holders, fixtures, etc. -Uses CAD/CAM software to generate programs -Writes code by means of general editors' -Write code at machine controller -Prepares and maintains documentation -Perform program compare to ensure no deviations were made -Modifying existing programs to improve efficiency, tool life and quality of product Machine Operation: Performs task correctly such as: -Loading and unloading of parts -Changes inserts -Makes wear offsets -Washes down inside of machine -Cleans work area -Production documentation Machine Set-up: -Performs task correctly such as: -Remove and install of tools and fixtures -Perform tool setting and tool offsets -Program prove out thru part meeting specifications -Transfer of machine programs to and from machine control -Instruct in these attributes Quality: -Demonstrates accuracy and thoroughness in all work Quantity: -Meets productivity standards -Completes work in allotted time -Strives to increase productivity Measuring Ability: Proper use of measuring instruments such as: -Caliper -Micrometer -Machinist scale -Functional gages -Height stand -Indicators -Use of CMM a plus Proper measuring techniques: -of tolerances to .00005 -of Surface Finishes Blue Prints: -Is able to read blue print dimensioning -Is able to interpret blue print information -Is able to comprehend blue print information -Application of tolerances as defined -Knowledge and use of Geometric Dimensioning and Tolerancing (GD&T) Computer Use: -Ability to use a standard PC -Uses computer programs correctly Safety: -Follows safety policies -Wears PPE -Reports potentially unsafe conditions -Uses equipment and materials properly Security: -Follows security policies Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to help individuals with disabilities to perform the essential functions. -Sitting or standing for long durations of time -Use hands and fingers to grasp, pinch, pull, feel, handle and manipulate parts and tools -May be exposed to moving mechanical parts -Lifting up to 40 lb. unassisted -Exposure to fumes or airborne particles -Exposed to noise levels requiring PPE Definitions: Constant (5-8 hrs. /shift) Frequent (2-5 hrs. /shift) Occasional (Up to 2 hrs. /shift)