Numerical control operator jobs in Altoona, PA - 27 jobs

Job Description Prepares and operates computer numerical control machines. Follows provided operational instructions for the machine and part processes. Responsible for the proper loading of parts and materials. Responsible for in-process inspections and may require finessing. Responsible for accurate entries into ERP system. Manufactures parts to required quantity. Maintains a properly 5S work area and supports machine maintenance as required. Responsible for providing relevant feedback timely and accurately to managers and machinists. Monitors machine operation and display readouts to detect malfunctions. Compares display data to specifications and notifies supervisor of machine malfunctions. Inspects and measures parts to verify conformance to specifications. May perform machine adjustments and maintenance. Adheres to facility and machine safety procedures, alerting manager of any safety concerns. Plans machining by studying work orders and work instructions. Interprets geometric dimensions and tolerances. Essential Duties and Responsibilities include, but are not limited to: • Performs part processing per provided work instruction and/or verbal instruction. • Interprets drawing requirements • Select and utilize appropriate cutting tools and work holding for various materials and machining processes. • Perform precise measurements and inspections to ensure parts meet stringent quality control standards. • Manages tooling and fixturing as required • Reports faulty hardware, processes, and non-conformances to immediate supervisor • Maintain a clean and safe work environment, adhering to all safety protocols. • May assist with developing new machining methods and tooling for complex parts. • Actively engage in and initiate continuous improvement activities • Other duties assigned. Qualifications: Experience and Education: Minimum of 2 years of machining experience, preferably in a high-precision or military environment. High school degree or equivalent Technical Skills: Proficient in operating and programming CNC machines. Skilled in reading and interpreting blueprints, technical drawings, and CAD models. Ability to use precision measuring tools (calipers, micrometers, CMM). Understanding of GD&T Physical Requirements: Must be able to lift heavy equipment and materials up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus. Ability to use hands to finger, handle, or feel, as well as reach with hands and arms. Capable of standing for long periods and working in various industrial settings (e.g., machine shops). Ability to withstand loud noise environment. Supervisory Responsibilities: None Travel Required: N/A

• You will set up and operate various types of CNC machinery such as mills or lathes, or conventional machines such as lathes, jig borers, or grinders. • Machine complex parts to exacting blueprint tolerances, meticulously meet specified requirements, ensuring the quality of finished parts. • Collaborate with a supportive team to ensure high-quality production and timely delivery. • Participate in company training programs, guided by subject matter experts, to develop your skills and advance your career. • Perform other duties as assigned to meet manufacturing goals. Basic Qualifications • Must be able to read and interpret blueprints. • Independently program, edit programs, set up and run CNC OR conventional machines. Desired skills • Possess a certification from the National Institute of Metalworking Skills (NIMS) • Graduation from a state approved journeyman program or receipt of an associate's degree in machine technology. • Receipt of a machine technology certification of completion with a minimum of 1500 hours training. • Ability to edit and program Mazak, Siemans or Fanuc controls. • 1 to 2 years of machining experience with either CNC and/or conventional machines Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. * At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Other Important Information By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to work remotely Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedule Information Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.

At Spectrum Control, most departments operate on a 4-day, 10-hour work schedule in exchange for a 3-day weekend. We offer competitive wages and PTO, plus our benefits begin on day 1 of employment. Come join a workforce where we put you first! JOB SUMMARY: The Machinist will set-up and operate all types of machine tools such as lathes, milling machines, CNC, grinders, saws and lappers to be used to machine metal, plastic or other pieces to specifications, tooling instructions or standard charts by applying knowledge of machining methods. JOB FUNCTIONS: Create and modify product fixtures and tools using machine equipment and techniques acquired by experience Set-up and operate CNC vertical machining centers (VMC) Edit CNC programs as needed Machine and modify prototype parts and fixtures and engineering tooling as directed Perform basic maintenance on CNC, VMC, HMC, Turning Center and manual machines Study drawings and specifications to determine dimensions and tolerances of a finished piece, sequence of operations and set-up requirements Measure finished parts to verify dimensions and tolerance Able to measure, cut or work on items with great accuracy Able to produce parts within tolerances QUALIFICATIONS: Education: High School or Equivalent Experience Years: 1-3 years Experience Type: Machine Shop/Trade School OR Equivalent combination of education and experience Knowledge of safety standards for equipment being operated Able to work with close tolerances Able to read and interpret printsw Knowledge of G and M code CNC Programs Able to quickly react to non-conforming as they occur Mechanical drawing experience WORK ENVIRONMENT: Machine Shop Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Third-Party Recruiters Please note, that per Spectrum Control Policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters are engaged to provide candidates for a specified opening and in alignment with our values and expectations. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Spectrum Control will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. If you or your agency are interested in becoming an approved vendor please contact ************************************.

Job DescriptionMolding Machine Operator - 2nd Shift Who We Are At Drucker Diagnostics, we believe healthier outcomes begin with confidence in every test result and that every connection matters. We are proud to be the leading manufacturer of high-quality benchtop centrifuges that empower laboratories and clinics worldwide. Our work supports vital healthcare efforts every day, and it starts with the skill and dedication of our team members who build precision, reliability, and care into every product. Our Injection Molding Team plays a critical role in that mission by supporting production, quality, and innovation across the organization. If you want to make a real difference by building something truly remarkable, join us. Your Mission As a Level I Molding Machine Operator, you will perform foundational machining and toolroom support tasks that keep production running smoothly. Your work supports the fabrication, maintenance, and preparation of precision parts and tools used across the facility. In this role, you will operate manual machining equipment, follow draings and work instructions, maintain accurate part quality, and contribute to a safe, organized shop environment - ultimately helping us deliver products that Make People Safer, Healthier, and More Productive. This is an excellent entry point for individuals who enjoy hands-on work, mechanical tasks, and working in a skilled trade environment. What You'll Do - Essential Duties and Responsibilities Under close supervision and within established guidelines, you will: Follow all safety policies, lockout/tagout procedures, and required PPE guidelines. Follow procedures and accurately document work performed on job travelers. Operate Injection Molding Press, CNC Machining Center, or Pad Printer in a semi-automatic or automatic mode. Submit startup parts to Quality Assurance. Clean mold parting lines and vents as needed during production. Perform visual inspection of parts. Perform secondary operations such as drilling, trimming, and deburring. Perform assembly operations. Package and label parts. Maintain a clean and organized work area by sweeping, mopping, picking up trash, and wiping machines. Communicate effectively with team members and supervisors. Support daily production activities as assigned. Take pride in craftsmanship and contribute to a positive, collaborative environment. What You'll Bring Required Qualifications: Always prioritize safety above all else and actively demonstrate safe practices in every task. Follow all safety procedures, proactively report unsafe situations, and wear the required PPE. Lead by example in maintaining a safe work environment and encourage your co-workers to do the same. Basic understanding of machining operations and mechanical processes. Understand basic operator controls of IMM, CNC, and Pad Printer. Able to read and interpret simple drawings and work instructions. Familiar with basic shop math. Comfortable using basic measuring tools. Good verbal and written communication. Desired Education and Experience: High School Diploma or GED preferred, vocational training desired. 0 - 2 years of prior experience in a factory machine shop. Or an equivalent combination of education and experience. Alternate education and experience considered based on the individual candidate. Computer Skills: Basic computer skills required for documentation and training. Physical and Work Environment Requirements: Manufacturing Machine Shop - Injection Molding PPE required. Standing most of the shift; occasional sitting. Ability to lift up to 50 pounds, repetitively at times. Work is performed in a clean, manufacturing environment with a strong focus on safety and quality. Travel Requirements Not applicable Why Join Us? Be part of a mission-driven company helping make people safer, healthier, and more productive. Know that every product you support impacts laboratories, healthcare providers, and patients worldwide. Join a team that takes pride in craftsmanship, quality, and doing work that truly matters. Build your skills with hands-on training and clear opportunities for advancement. At Drucker Diagnostics, we know that behind every great product is a great person. We would be honored to have you join our team and our vision for building something truly remarkable that will long outlast us! Powered by JazzHR Ub7jpjuzI4

Work Your Magic with us! Start your next chapter and join MilliporeSigma. Ready to explore, break barriers, and discover more? We know you've got big plans - so do we! Our colleagues across the globe love innovating with science and technology to enrich people's lives with our solutions in Healthcare, Life Science, and Electronics. Together, we dream big and are passionate about caring for our rich mix of people, customers, patients, and planet. That's why we are always looking for curious minds that see themselves imagining the unimaginable with us. This role does not offer sponsorship for work authorization. External applicants must be eligible to work in the US. Your Role: The Machinist Technician 2 at MilliporeSigma' s Bellefonte, PA site will perform a variety of tasks in the production and repair of metal and plastic parts. Job duties include: * Set up and operate a variety of machine tools according to standard operating procedures - includes engine lathe, turret lathe, milling machine, automatic turret lathe, CNC lathes, CNC mill, saws, and grinders. * Operate a variety of hand tools and precision measuring instruments. * Produce metal and plastic parts to close tolerances as directed. May be required to make standard shop computations relating to dimensions of work, selection of materials, equipment required, speeds of machining, etc. * Develop operation sequences and recommends changes to machining processes to enhance efficiency and quality. * Determine set-up and fixturing requirements in alternate methods of machining. * Maintain a clean, neat, and well-organized work area. Physical Qualifications: * Proficient in operating machine shop equipment and machinery * Capable of lifting 5-20 pounds regularly and occasionally lifting materials over 50 pounds * Able to stand for extended periods * Normal vision and may require hearing protection* Competent in wearing proper personal protective equipment * Experienced in working in a machine shop setting * Skilled in using hands for grasping, manipulating objects, and demonstrating precise movements * Comfortable using ladders and steps Who You Are Minimum Qualifications: * High School Diploma or GED * 1 + years of experience with machining Preferred Qualifications: * Strong communication and organizational skills * CNC programming experience: 3+ years with CNC lathe and 1+ year with CNC mill * 1+ year of industrial work experience * Experience operating lab equipment, including balances, vacuum pumps, and ovens * High attention to detail * Proficient with computers * Capable of working independently or in small groups * Legible writing skills * Experience reading and using technical instructions, including engineering drawings * Knowledge of standard machine shop measuring instruments and inspection methods * Competent in basic math calculations * Basic understanding of drafting principles * Skilled in maintaining effective working relationships with co-workers RSREMD Pay Range for this position: $20.00 - $33.00. The offer range represents the anticipated low and high end of the base pay compensation for this position. The actual compensation offered will be determined by factors such as location, level of experience, education, skills, and other job-related factors. Position may be eligible for sales or performance-based bonuses. Benefits offered by the Company include health insurance, paid time off (PTO), retirement contributions, and other perquisites. For more information click here. What we offer: We are curious minds that come from a broad range of backgrounds, perspectives, and life experiences. We believe that this variety drives excellence and innovation, strengthening our ability to lead in science and technology. We are committed to creating access and opportunities for all to develop and grow at your own pace. Join us in building a culture of inclusion and belonging that impacts millions and empowers everyone to work their magic and champion human progress! Apply now and become a part of a team that is dedicated to Sparking Discovery and Elevating Humanity!

We are looking for an experienced Machinists (manual and/or cnc) to join our team. In this role, you will be responsible for producing Precision parts and components by operating and manual and/or CNC machines. Candidates with experience in either manual machining or CNC machining are encouraged to apply. Willing to train the right person. Responsibilities: Set up and operate manual and/or CNC machines, including mills, lathes, and other machining equipment. Read and interpret technical drawings, blueprints, and work instructions to produce accurate parts. Select and install appropriate tools, fixtures, and materials for machining operations. Monitor machine performance and make necessary adjustments to ensure precision and quality. Perform routine maintenance on machines and tools to ensure optimal performance. Inspect finished parts to verify accuracy, using measuring tools such as calipers, micrometers, and gauges. Adhere to safety protocols and maintain a clean and organized work environment. Qualifications: 1 year previous experience as a Machinist or CNC Machinist is required. Proficiency in reading blueprints and technical drawings. Knowledge of machining techniques, materials, and tooling. Strong attention to detail and problem-solving skills. Ability to use precision measuring tools. Why Join Us? Top pay based on experience. Opportunities for growth and skill development. Supportive and collaborative team environment. Excellent benefits including generous profit sharing.

The Position To maintain, repair, or build stamping dies, fixtures, jigs, and secondary operation equipment utilized within the Pensacola manufacturing facility. Responsibilities A comprehensive understanding of all aspects of Tool and Die and stamping. Ability to produce precision tools, dies, jigs, and fixtures from blueprints and or hand sketches. Ability to work with engineers and designers to determine how to best address manufacturing issues, part development, and tool designs. Maintain, repair, and improve stamping dies and tooling. Make adjustments to equipment utilized in the production process to insure part quality and promote continuous improvement to the process. Work safely by yourself and with others maintaining a clean work environment. Must be able to work well with co-workers across the plant from a supportive, Team-oriented perspective. Supervisory Responsibilities Minimal supervisory responsibilities. Qualifications Tool & Die makers must either hold Journeyman certificate in Tool & Die or Die Making - or - have a minimum of 5 years of education and training in a formal apprenticeship or postsecondary program. Must be well versed in the use of machine tools (i.e. Mills, lathes, grinders, etc.) and precision measuring equipment. Must be familiar with machining and grinding of a variety of common metals both hardened and soft. Must have experience with single hit and progressive dies. Must be knowledgeable in mathematics and blueprint reading. Language Skills Ability to read and interpret documents such as safety regulations, operation and maintenance instructions, procedure manuals, and blueprints. Must be able to communicate well with engineers, designers, and co-workers. Mathematical Skills Ability to add, subtract, multiply, and divide along with a full understanding and use of geometry. Reasoning Abilities Tool & Die makers need to have a natural ability to diagnose, interrupt, and assess problems in tooling and manufacturing processes creating solutions to complex situations. Computer Skills Computer skills are a plus. Knowledge and understanding of CNC programming and operation.

SummaryGE HealthCare is committed to designing imaging devices that guide Surgeons in making critical, life-changing decisions. With our Active imaging platforms, procedure-based transducer portfolio, and software packages created for the end-user, we provide the solution to visualize anatomy and pathology, guide interventions, and navigate inside the human body. Our mission is to change the standard of care in surgical interventions with our real-time visual guidance devices, giving Surgeons the tools needed to immediately make critical decisions. With our real-time visualization and guidance platform, BK Medical is our new Surgical Visualization and Guidance, empowering surgeons when it matters most: during the procedure. This team is responsible for performing limited electronic, electromechanical, mechanical, and support production assembly tasks. These tasks are repetitive in nature and involve building and assembling routine units. Team members determine and follow methods and sequences of operations for assembling cables, soldering, bonding, testing, standard troubleshooting, and manufacturing transducers. Eligible for $1500 sign on bonus after the successful completion of 6 Months of Employment.Job DescriptionRole Responsibilities Set up and operate CNC and manual machines to manufacture components for medical devices. Read and interpret engineering drawings, blueprints, and CAD files with a focus on tight tolerances. Work with materials such as titanium, stainless steel, and medical-grade plastics. Perform in-process inspections using precision measuring instruments (micrometers, calipers, CMMs). Maintain documentation in compliance with FDA, ISO 13485, and GMP standards. Collaborate with quality assurance and engineering teams to ensure product conformity. Maintain a clean and organized work area, adhering to cleanroom protocols when required. Troubleshoot machining issues and suggest process improvements. Experience with CAD/CAM/Mastercam software. Knowledge of lean manufacturing principles and follow PPE requirements. Fabrication experience is a plus. Required Qualifications High school diploma or GED/equivalent; completion of a machinist apprenticeship or vocational training program. Minimum 1 year of experience in a machining or manufacturing environment. Proficiency in reading blueprints, technical drawings, CAD files and using precision measuring tools (e.g., calipers, micrometers, gauges). Strong attention to detail and problem-solving skills. Familiarity with materials such as steel, aluminum, and plastics. Work Environment and Physical Demands Stand for 8-10 hours a day while operating machines. Regularly lift and move materials or parts weighing 25-50 pounds. (Ability to lift 35 pounds alone, anything over 35 pounds requires assistance.) Occasionally lift heavier items with assistance or mechanical aids. Frequent use of hands and arms for tasks like turning knobs, adjusting settings, or using hand tools. Good vision (with or without correction) is needed to read blueprints, inspect parts, and monitor machine operations. Ability to hear warning signals, machine sounds, and communicate in noisy environments. Regularly bend, stoop, or reach to load materials or access machine components. Must wear safety glasses, gloves, steel-toed boots, and sometimes hearing protection or respirators. #LI-SAM1 #LI-ONSITE #LI-PA We will not sponsor individuals for employment visas, now or in the future, for this job opening. Additional Information GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees. Relocation Assistance Provided: No

SummaryGE HealthCare is committed to designing imaging devices that guide Surgeons in making critical, life-changing decisions. With our Active imaging platforms, procedure-based transducer portfolio, and software packages created for the end-user, we provide the solution to visualize anatomy and pathology, guide interventions, and navigate inside the human body. Our mission is to change the standard of care in surgical interventions with our real-time visual guidance devices, giving Surgeons the tools needed to immediately make critical decisions. With our real-time visualization and guidance platform, BK Medical is our new Surgical Visualization and Guidance, empowering surgeons when it matters most: during the procedure. This team is responsible for performing limited electronic, electromechanical, mechanical, and support production assembly tasks. These tasks are repetitive in nature and involve building and assembling routine units. Team members determine and follow methods and sequences of operations for assembling cables, soldering, bonding, testing, standard troubleshooting, and manufacturing transducers. Eligible for $1500 sign on bonus after the successful completion of 6 Months of Employment.Job DescriptionRole Responsibilities Set up and operate CNC and manual machines to manufacture components for medical devices. Read and interpret engineering drawings, blueprints, and CAD files with a focus on tight tolerances. Work with materials such as titanium, stainless steel, and medical-grade plastics. Perform in-process inspections using precision measuring instruments (micrometers, calipers, CMMs). Maintain documentation in compliance with FDA, ISO 13485, and GMP standards. Collaborate with quality assurance and engineering teams to ensure product conformity. Maintain a clean and organized work area, adhering to cleanroom protocols when required. Troubleshoot machining issues and suggest process improvements. Experience with CAD/CAM/Mastercam software. Knowledge of lean manufacturing principles and follow PPE requirements. Fabrication experience is a plus. Required Qualifications High school diploma or GED/equivalent; completion of a machinist apprenticeship or vocational training program. Minimum 1 year of experience in a machining or manufacturing environment. Proficiency in reading blueprints, technical drawings, CAD files and using precision measuring tools (e.g., calipers, micrometers, gauges). Strong attention to detail and problem-solving skills. Familiarity with materials such as steel, aluminum, and plastics. Work Environment and Physical Demands Stand for 8-10 hours a day while operating machines. Regularly lift and move materials or parts weighing 25-50 pounds. (Ability to lift 35 pounds alone, anything over 35 pounds requires assistance.) Occasionally lift heavier items with assistance or mechanical aids. Frequent use of hands and arms for tasks like turning knobs, adjusting settings, or using hand tools. Good vision (with or without correction) is needed to read blueprints, inspect parts, and monitor machine operations. Ability to hear warning signals, machine sounds, and communicate in noisy environments. Regularly bend, stoop, or reach to load materials or access machine components. Must wear safety glasses, gloves, steel-toed boots, and sometimes hearing protection or respirators. #LI-SAM1 #LI-ONSITE #LI-PA We will not sponsor individuals for employment visas, now or in the future, for this job opening. Additional Information GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees. Relocation Assistance Provided: No

$1.50/hr. shift differential for 2nd and 3rd shift ($18.63-$20.83) Operates computer-controlled laser machines to cut patterns and/or parts from sheet metal producing customer parts from raw material in accordance with job specific work orders and inspection cards. Responsibilities Inserts sheet metal onto cutting table of laser machine, activates laser beam. Removes cut component from holding fixture and examines components for defects and completeness of cut. Completes operator Preventative Maintenance assignments. Adjust machine parameters to ensure cut quality meets specifications. Performs part inspections in accordance with the Inspection Instructions. Takes necessary steps to meet or exceed run standards and productivity goals. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Language Ability: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: To perform this job successfully, an individual should have knowledge and ability to key critical data into CMS with accuracy and thoroughness. Certificates and Licenses: No certifications needed. Supervisory Responsibilities: This job has no supervisory responsibilities. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee can be exposed to work near moving mechanical parts. The noise level in the work environment can be loud. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision and peripheral vision. While performing the duties of this job, the employee is regularly required to stand, use hands to finger, handle or feel; reach with hands and arms and talk or hear. The employee is frequently required to stoop, kneel, crouch, or crawl. The employee is occasionally required to walk and climb or balance.

Cleveland Brothers, the largest Cat dealer in Pennsylvania, northern West Virginia and western Maryland, has an immediate opportunity for a CNC Machinist. Cleveland Brothers Equipment Co., Inc., your local Caterpillar dealership, is looking for a highly motivated self-starter to join our growing team of established and successful professionals. Primary Responsibilities: * Apply safe working methods * Set-up, operate, and adjust various CNC machines * Machine to OEM specifications maintaining tight tolerances * Perform a variety of associated functions to maintain continuous operation of the machines * Operate overhead cranes/jib cranes, grinders, hand tools, and precision measurement tools * Maintain required job skills and knowledge requirements * Maintain work area, equipment, and all documents/records to be audit ready at all times * Collaborates with team members in the creation, implementation, and training of standard work procedures * Perform other job-related tasks as assigned Skills, Knowledge, Qualifications: * High school diploma or equivalent * Technical school or certification in related discipline preferred * 3-5 years as a CNC machinist * Use of fine motor skills * Use of hand tools * Work in awkward positions and in tight spaces including forward reach, lateral reach, squat, overhead reaching, twisting, and forward head and rotation of neck * Must be able to lift 50 pounds * Computer skills * Ability to read prints and use gauges for quality inspection Why Join the Cleveland Brothers Team * Market Leading Benefits Package: Medical, dental, vision, life insurance, 401(k) match, short- and long-term disability, health savings account, PTO, Profit Sharing Account. * Advancement: Take your career to the next level with a dynamic organization that wants to see you succeed! In addition to room to grow in this role, there are limitless opportunities across 29 locations whether you want to move up, or into another division of the company. * Stability - Cleveland Brothers has been around for 75 years. Experience tremendous job security in an essential role with an organization that is around for the long haul. About Us: For nearly 80 years, Cleveland Brothers Equipment Co., Inc. has proudly served as the exclusive Cat dealer for western, central, and northeastern Pennsylvania, northern West Virginia, and western Maryland. Since 1948, we've built a legacy as a trusted partner in the construction, mining, forestry, and agricultural sectors. From our 30 locations, we deliver comprehensive solutions, including high-quality new, used, and rental equipment, genuine parts, and expert service. Beyond our extensive machinery offerings, we provide diverse solutions, such as industrial engines and generators all supported by our knowledgeable team of professionals. At Cleveland Brothers, we're more than a dealer; we're your dedicated partner committed to helping you achieve your goals. Discover how we can support your operations at ************************** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

GE HealthCare is committed to designing imaging devices that guide Surgeons in making critical, life-changing decisions. With our Active imaging platforms, procedure-based transducer portfolio, and software packages created for the end-user, we provide the solution to visualize anatomy and pathology, guide interventions, and navigate inside the human body. Our mission is to change the standard of care in surgical interventions with our real-time visual guidance devices, giving Surgeons the tools needed to immediately make critical decisions. With our real-time visualization and guidance platform, BK Medical is our new Surgical Visualization and Guidance, empowering surgeons when it matters most: during the procedure. This team is responsible for performing limited electronic, electromechanical, mechanical, and support production assembly tasks. These tasks are repetitive in nature and involve building and assembling routine units. Team members determine and follow methods and sequences of operations for assembling cables, soldering, bonding, testing, standard troubleshooting, and manufacturing transducers. Eligible for $1500 sign on bonus after the successful completion of 6 Months of Employment. Job Description Role Responsibilities * Set up and operate CNC and manual machines to manufacture components for medical devices. * Read and interpret engineering drawings, blueprints, and CAD files with a focus on tight tolerances. * Work with materials such as titanium, stainless steel, and medical-grade plastics. * Perform in-process inspections using precision measuring instruments (micrometers, calipers, CMMs). * Maintain documentation in compliance with FDA, ISO 13485, and GMP standards. * Collaborate with quality assurance and engineering teams to ensure product conformity. * Maintain a clean and organized work area, adhering to cleanroom protocols when required. * Troubleshoot machining issues and suggest process improvements. * Experience with CAD/CAM/Mastercam software. * Knowledge of lean manufacturing principles and follow PPE requirements. * Fabrication experience is a plus. Required Qualifications * High school diploma or GED/equivalent; completion of a machinist apprenticeship or vocational training program. * Minimum 1 year of experience in a machining or manufacturing environment. * Proficiency in reading blueprints, technical drawings, CAD files and using precision measuring tools (e.g., calipers, micrometers, gauges). * Strong attention to detail and problem-solving skills. * Familiarity with materials such as steel, aluminum, and plastics. Work Environment and Physical Demands * Stand for 8-10 hours a day while operating machines. * Regularly lift and move materials or parts weighing 25-50 pounds. (Ability to lift 35 pounds alone, anything over 35 pounds requires assistance.) * Occasionally lift heavier items with assistance or mechanical aids. * Frequent use of hands and arms for tasks like turning knobs, adjusting settings, or using hand tools. * Good vision (with or without correction) is needed to read blueprints, inspect parts, and monitor machine operations. * Ability to hear warning signals, machine sounds, and communicate in noisy environments. * Regularly bend, stoop, or reach to load materials or access machine components. * Must wear safety glasses, gloves, steel-toed boots, and sometimes hearing protection or respirators. #LI-SAM1 #LI-ONSITE #LI-PA We will not sponsor individuals for employment visas, now or in the future, for this job opening. Additional Information GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees. Relocation Assistance Provided: No

Job Description Lincoln Contracting & Equipment is seeking a burn table operator to operate a computer numerical control (CNC) burn table to cut steel and other metals according to specifications. Must be able to read and understand blueprints, program the burn table, load materials, and inspect the finished product for accuracy and quality. Essential Duties and Responsibilities include the following. Other job-related duties may be assigned in compliance with state and federal regulations. Step up and operate the burn table, which includes selecting the correct burning tip and gas setting. Load and unload the materials using a crane. Position and guide workpieces to the correct specifications. Read and interpret blueprints and technical drawings. Measure workpiece dimensions for accuracy. Perform quality control inspections on finished products. Education and/or Experience Vocational/technical training and a high school diploma or general education degree with work experience in industrial manufacturing are needed. Benefits: 401(k) 401(k) matching Dental Insurance Disability insurance Flexible spending account Health insurance Life insurance Paid time off Professional development assistance Vision insurance #LP

Alltrista Plastics - Technician,Tooling II Ensure molds are repaired and fully functional to optimize quality, mold utilization and cavitation. Primary Functions Troubleshoots quality problems with the mold to identify root causes of deviant parts and performs necessary repairs to ensure parts made are within quality specifications. Performs necessary machine repairs to spare parts to ensure mold use is optimized. Demonstrates proficiency in utilizing machining equipment in the tool shop to improve and repair molds to their optimal levels. Analyzes existing molds and makes recommendations for mold corrections to improve customer satisfaction, cycle times, cavitation and life of the mold. Develops and implements an action plan to address these issues upon approval. Utilizes production monitoring system to evaluate and continuously improve the mold preventative maintenance program on all molds. Properly documents all preventative maintenance and mold improvements. Initiates communication and interaction with the Manufacturing Team to maintain full cavitation, utilization and efficiencies of the molds. Actively participates in spare part analysis to develop cost efficient levels of spares. Maintains this established minimum inventory of spare components for each mold through coordination with the Supervisor and the approved tool vendors. For components removed from the mold, perform evaluation for repairability or order replacements with proper approvals. Supports the team concept by performing multiple functions as assigned by management. Supports project/program management with insight and participation in design reviews, communicating improvements and learned advantages. Performs preventative maintenance activities to the molds and maintains the customer's assets in peak functional condition. Supports the QMS by adhering to the system requirements. Understands and follows plant safety rules. Helps to identify and eliminate any safety hazard or concern. Assists in monitoring of quality of work output. Maintains compliance with company policy and procedures. Maintains a clean, neat, and orderly work area. Responsible for reporting any problems or concerns to direct Supervisor. Maintains good working relations with all other employees. Strives to have no conflicts with other employees. Requires regular attendance to perform essential element as contained herein between the assigned start and end times for work. Other duties as assigned. Key Qualifications High school diploma or equivalent. Strong tooling background to include significant experience in close tolerance grinding, lathes and mills. Strong troubleshooting/analytical skills. Experience with hot runner systems. Process knowledge (including electronic). Experience in mold repair. Experience with making and reading prints. Physical skills necessary to utilize machining equipment. Physical skills necessary to utilize mold disassembly; assemble tools and handle molds. Self-motivated to learn and perform job tasks to meet or exceed customer and company expectations. Demonstrates the capacity to work at an efficient rate to meet production goals and standards. Effectively communicates with others both verbally and in writing. Ability to work 10 hour shifts, as applicable. Physical Requirements The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Environment: Normal manufacturing environments; work with machinery and media in or around confined spaces; exposure to chemicals, grease and oils. Physical: Sufficient physical ability to perform heavy lifting and carrying up to 50 lbs; reaching, kneeling, crawling, climbing; standing for moderate periods of time. Vision: See in the normal visual range with or without correction; vision sufficient to read computer screens and printed documents. Hearing: Hear in the normal audio range with or without correction. Other: Ability to work overtime or occasionally on weekends with short notice.

Penn Machine Company LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Penn Machine Company has an excellent opportunity available in a growth industry with a proven 100+ year old company for a Machinist. Penn Machine Company LLC, a Marmon/Berkshire Hathaway Company, is a leading manufacturer of products and services for the transit, railroad, oil/gas, and mining industries. We are seeking a qualified individual for a full-time position for our Transit Division in Blairsville, PA. Our Machinists operate equipment necessary to produce quality components to specifications on prints while maintaining a clean and safe work environment. Normal schedule is Monday-Thursday. Primary responsibilities: * Operate and maintain operation of CNC lathes, mills, and/or gear grinders as well as hand and power tools as required to perform job assignments. * Replace worn inserts, drills or tooling and adjust feed/speed rates. * Complete work assignments and associated reports in a timely manner. * Verify machine components with measuring instruments to ensure parts are made within tolerances. * Operate powered industrial forklift and crane hoist to transfer and position materials as needed. * Maintain a safe, clean and well organized work area. Requirements for Positions * Machining background - knowledge of and/or machining background. Programming experience and training is preferred. Experience programming in MasterCam and/or Gear Pro is a plus. * Strong background to read, understand, and interpret prints, with using measuring equipment, in completing reports and documentation, and ability to read and understand written directions and procedures. * Machine shop environment background preferred. * Self-motivated and willing to work with minimal supervision. * Willingness to work overtime and alternate shifts, when required We are willing to train a candidate with a machining and mechanical background and the right attitude to succeed. Competitive wage and benefits are offered, including medical, dental, vision, 401k w/match, vacation, disability, and life insurance benefits beginning on first day of employment. Equal Opportunity Employer Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

**Description:** - You will set up and operate various types of CNC machinery such as mills or lathes, or conventional machines such as lathes, jig borers, or grinders\. - Machine complex parts to exacting blueprint tolerances, meticulously meet specified requirements, ensuring the quality of finished parts\. - Collaborate with a supportive team to ensure high\-quality production and timely delivery\. - Participate in company training programs, guided by subject matter experts, to develop your skills and advance your career\. - Perform other duties as assigned to meet manufacturing goals\. **Basic Qualifications:** - Must be able to read and interpret blueprints\. - Independently program, edit programs, set up and run CNC OR conventional machines\. **Desired Skills:** - Possess a certification from the National Institute of Metalworking Skills \(NIMS\) - Graduation from a state approved journeyman program or receipt of an associate's degree in machine technology\. - Receipt of a machine technology certification of completion with a minimum of 1500 hours training\. - Ability to edit and program Mazak, Siemans or Fanuc controls\. - 1 to 2 years of machining experience with either CNC and/or conventional machines **Clearance Level:** None **Other Important Information You Should Know** **Expression of Interest:** By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match\. Should this match be identified you may be contacted for this and future openings\. **Ability to Work Remotely:** Onsite Full\-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility\. **Work Schedules:** Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees\. Schedules range from standard 40 hours over a five day work week while others may be condensed\. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits\. **Schedule for this Position:** 4x10 hour day, 3 days off per week **Lockheed Martin is an equal opportunity employer\. Qualified candidates will be considered without regard to legally protected characteristics\.** **The application window will close in 90 days; applicants are encouraged to apply within 5 \- 30 days of the requisition posting date in order to receive optimal consideration\.** At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges\. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work\. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility\. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work\. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility\. If this sounds like a culture you connect with, you're invited to apply for this role\. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications\. **Experience Level:** Hourly/Non\-Exempt **Business Unit:** AERONAUTICS COMPANY **Relocation Available:** No **Career Area:** Manufacturing **Type:** Full\-Time **Shift:** Second

Builds fixtures to print for CNC machines & assembly. Build fixtures to print for CNC machines & assembly. Machine prototype parts to print. Machine secondary operations and rework parts. Responsible for accuracy of own work. Use inspection gauges and equipment to check work. Must be able to wear personal safety gear as required to meet OSHA regulations, ie., goggles, gloves, back belt, apron, and respirator when required. Basic blueprint reading and mil spec knowledge. Fill out required paperwork and required documentation. Essential Duties and Responsibilities include, but are not limited to: Positions and secures workpiece on magnetic chuck, in holding fixture, or directly to machine table. • Selects grinding wheel, grinding speeds, and feed rates for each operation according to knowledge of metal properties and abrasives, and mounts wheel on spindle. • Moves device to dress wheel. • Moves controls and reads dials to set rotation speeds and feed rates. • Positions and tightens stops to limit table travel. • Moves controls to feed workpiece to wheel or vice versa. • Turns valve handle and directs flow of coolant against wheel and workpiece. • Verifies dimensions of ground workpiece for conformance to specifications, using measuring instruments as micrometers, comparators, dial indicators, gauge blocks, and load test equipment. • May dress grinding wheel to specified profile for contour grinding, using special fixtures and tools. • May grind nonmetallic materials, such as plastics. • May operate tracer attachment to duplicate contours from templates or models. Supervisory Responsibilities: None. Travel Required: N/A Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

Molding Machine Operator - 2nd Shift Who We Are At Drucker Diagnostics, we believe healthier outcomes begin with confidence in every test result and that every connection matters. We are proud to be the leading manufacturer of high-quality benchtop centrifuges that empower laboratories and clinics worldwide. Our work supports vital healthcare efforts every day, and it starts with the skill and dedication of our team members who build precision, reliability, and care into every product. Our Injection Molding Team plays a critical role in that mission by supporting production, quality, and innovation across the organization. If you want to make a real difference by building something truly remarkable, join us. Your Mission As a Level I Molding Machine Operator, you will perform foundational machining and toolroom support tasks that keep production running smoothly. Your work supports the fabrication, maintenance, and preparation of precision parts and tools used across the facility. In this role, you will operate manual machining equipment, follow draings and work instructions, maintain accurate part quality, and contribute to a safe, organized shop environment - ultimately helping us deliver products that Make People Safer, Healthier, and More Productive. This is an excellent entry point for individuals who enjoy hands-on work, mechanical tasks, and working in a skilled trade environment. What You'll Do - Essential Duties and Responsibilities Under close supervision and within established guidelines, you will: Follow all safety policies, lockout/tagout procedures, and required PPE guidelines. Follow procedures and accurately document work performed on job travelers. Operate Injection Molding Press, CNC Machining Center, or Pad Printer in a semi-automatic or automatic mode. Submit startup parts to Quality Assurance. Clean mold parting lines and vents as needed during production. Perform visual inspection of parts. Perform secondary operations such as drilling, trimming, and deburring. Perform assembly operations. Package and label parts. Maintain a clean and organized work area by sweeping, mopping, picking up trash, and wiping machines. Communicate effectively with team members and supervisors. Support daily production activities as assigned. Take pride in craftsmanship and contribute to a positive, collaborative environment. What You'll Bring Required Qualifications: Always prioritize safety above all else and actively demonstrate safe practices in every task. Follow all safety procedures, proactively report unsafe situations, and wear the required PPE. Lead by example in maintaining a safe work environment and encourage your co-workers to do the same. Basic understanding of machining operations and mechanical processes. Understand basic operator controls of IMM, CNC, and Pad Printer. Able to read and interpret simple drawings and work instructions. Familiar with basic shop math. Comfortable using basic measuring tools. Good verbal and written communication. Desired Education and Experience: High School Diploma or GED preferred, vocational training desired. 0 - 2 years of prior experience in a factory machine shop. Or an equivalent combination of education and experience. Alternate education and experience considered based on the individual candidate. Computer Skills: Basic computer skills required for documentation and training. Physical and Work Environment Requirements: Manufacturing Machine Shop - Injection Molding PPE required. Standing most of the shift; occasional sitting. Ability to lift up to 50 pounds, repetitively at times. Work is performed in a clean, manufacturing environment with a strong focus on safety and quality. Travel Requirements Not applicable Why Join Us? Be part of a mission-driven company helping make people safer, healthier, and more productive. Know that every product you support impacts laboratories, healthcare providers, and patients worldwide. Join a team that takes pride in craftsmanship, quality, and doing work that truly matters. Build your skills with hands-on training and clear opportunities for advancement. At Drucker Diagnostics, we know that behind every great product is a great person. We would be honored to have you join our team and our vision for building something truly remarkable that will long outlast us!

Lincoln Contracting & Equipment is seeking a burn table operator to operate a computer numerical control (CNC) burn table to cut steel and other metals according to specifications. Must be able to read and understand blueprints, program the burn table, load materials, and inspect the finished product for accuracy and quality. Essential Duties and Responsibilities include the following. Other job-related duties may be assigned in compliance with state and federal regulations. Step up and operate the burn table, which includes selecting the correct burning tip and gas setting. Load and unload the materials using a crane. Position and guide workpieces to the correct specifications. Read and interpret blueprints and technical drawings. Measure workpiece dimensions for accuracy. Perform quality control inspections on finished products. Education and/or Experience Vocational/technical training and a high school diploma or general education degree with work experience in industrial manufacturing are needed. Benefits: 401(k) 401(k) matching Dental Insurance Disability insurance Flexible spending account Health insurance Life insurance Paid time off Professional development assistance Vision insurance #LP