Numerical control operator jobs in Owego, NY

Basic Qualifications: * High school education or GED equivalency. * 3 years machine shop experience. * Ability and willingness to use basic hand tools and measuring devices (i.e. - dial calipers, rulers, tape measures, protractors, micrometers, gauges, etc.) as required within department. * Understanding of blueprint and process sheet interpretation. * Prior working knowledge of machine shop operations. Essential Functions & Responsibilities: * Set up and operate CNC equipment. * Operate any type and size of single spindle or multiple spindles on a variety of operations (drilling, reaming, boring, tapping, spot facing, countersinking, etc.) * Use all tools, jigs, fixtures, and gages necessary to perform operations. * May set up and operate lathes, drill presses, milling machines, grinders, and hand tools to fabricate parts and tools. * Check for proper tooling, sharpness, & alignment. • Work with close tolerances and fine finishes. * Perform tool offset and load parts. * Operate multiple machines simultaneously. * Perform duties on complex prototypes or first-time builds. * Compliantly troubleshoots tools, fixtures, and equipment as necessary. * Perform job responsibilities according to internal process specifications and third-party requirements. * Frequent interaction with internal and/or external customers and support functions (i.e. - Planners, Engineering) outside of home department. * Utilize proper PPE, safety equipment, and follow safety procedures. * Participate in and lead team initiatives. * Reports problems to appropriate resource and/or Coach. * Proactively work to improve efficiency and quality of products. * Understands and abides by the GE Leadership behaviors. * Other duties as required. Desired Qualifications: * 3-5 years machine shop experience in a manufacturing environment. * Education and/or training in machine shop operations. * Understanding of CNC and manual machine operations. * Basic programming knowledge to include reading editing of programs. * Experience in a self-directed team environment. * Lean manufacturing knowledge. Physical Demands: * Must be able to lift 40 - 82lbs (heavier items with assistance). * Must be able to push/pull up to 20 lbs. * All job descriptions are subject to change. The pay for this position is $24.70/hour. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 11/30/25. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at accommodation.mailbox@ge.com. Any offer of employment is conditioned upon the successful completion of a background check and drug screen (as applicable). This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Adecco is hiring immediately for a CNC Machine Operating role at a local client in Macedon, NY. If you excel in a fast-paced environment, this is an opportunity for you! This CNC Machine Operator position will allow you to enhance your career while gaining valuable experience in a production facility. What's in it for you? Competitive benefits with options such as medical, dental, vision, and 401(k) Weekly pay of $23.00-$30.00/hr. Paid Holidays Generous referral bonuses Primary responsibilities for CNC Machine Operators include: Operate CNC machines to manufacture parts according to specifications Follow machine programs and make basic adjustments as needed Review technical drawings and instructions to understand job requirements Check finished parts for accuracy and quality using standard measuring tools Monitor equipment performance and report or assist with basic troubleshooting Keep work areas clean and organized while following safety procedures Work cooperatively with team members and supervisors to achieve production goals Requirements: High School Diploma or GED preferred Minimum of 1 year CNC Mill experience (3+ years' experience with Mazak or Haas equipment preferred) Strong knowledge of CNC milling techniques and best practices Proficiency in writing and interpreting G-codes and M-codes to operate CNC machinery Ability to read and interpret technical drawings and blueprints to meet manufacturing specifications Understanding and practical application of GD&T (Geometric Dimensioning & Tolerancing) Strong analytical and numerical skills, including the ability to perform precise calculations with decimals and fractions Skilled in the use of basic measuring tools (tape measure, calipers, etc.) Strong interpersonal skills and the ability to work effectively in a team environment For instant consideration for this position, click Apply Now! Pay Details: $23.00 to $30.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

As an Amphenol Industrial Operations (AIO) CNC Machinist, you will be responsible for Manufacturing and processing components using CNC or Manual Lathes, Mills, Presses, and Manual Tools. The ideal candidate thrives in a fast-paced, high technology, manufacturing environment and works well in a matrix structure across all levels of the organization. Supervisory Responsibilities: None Essential Duties and Responsibilities: Responsible for programming, setting up, and operating CNC machines to produce precision parts in accordance with engineering drawings and specifications Create and optimize toolpaths, ensuring the highest quality and efficiency in production Program CNC Machines: Use Mastercam software to create and modify CNC programs for milling, turning, and other machining operations Machine Setup: Set up CNC machines by installing and aligning tools, fixtures, and workpieces based on setup sheets and engineering requirements Operate Equipment: Run CNC machines to produce high-quality components, monitor operations, and adjust parameters as needed Machine Maintenance: Perform routine maintenance on machines, tools, and equipment to ensure smooth operations Qualifications: Required: Minimum 2 years of experience as a CNC Machinist Proficiency in Mastercam for programming CNC machines Strong knowledge of CNC milling and turning operations Hands-on experience with precision measuring tools and inspection techniques Effective communication skills for collaboration across departments Preferred: CNC Certification Working Conditions / Physical Requirements: Primary Location: 20 Valley St. Endicott NY Physical Demands: The physical demands listed below are representative of those required to successfully perform the essential functions of this job. Reasonable accommodations may be provided for individuals with disabilities. While performing this role, the employee is regularly required to sit, stand, walk, talk, hear, and use hands to handle or feel objects. The employee may occasionally need to lift or move up to 50 pounds and must be able to remain in a seated or standing position for extended periods. Travel: No expected travel except occasional training opportunity. About the Company: Amphenol Industrial Operations, headquartered in Endicott, New York with global manufacturing, sales and marketing locations, specializes in delivering a comprehensive range of high-reliability power and signal connectors along with interconnection systems designed specifically for industrial applications. Our solutions cater to diverse industrial sectors such as alternative energy, power generation and storage, rail and mass transit, process control, automotive manufacturing, heavy equipment, wireless base stations, and petrochemical industries. Disclaimer: This job description reflects the general nature and level of work expected for this role. It is not intended to be a comprehensive list of all duties, responsibilities, skills, or qualifications. Management may assign additional tasks or modify responsibilities as needed to meet business needs.

Non-Exempt National Pipe & Plastics, a CRH company, is one of North America's largest PVC pipe producers, serving the water and energy markets from two east coast locations in Endicott, NY, and Greensboro, NC. But we're more than just a manufacturer. Our long history of exceptional customer service and product quality enables us to be a trusted and strategic solutions partner to engineers, contractors, distributors, specifiers, and more. As part of the CRH Infrastructure Products business, we are leading the industry with innovative, sustainable solutions with a safety-first mindset. Job Summary As an Extruder Operator at National Pipe and Plastics you'll be running a production line producing PVC pipe of varying specifications for water, sewer and commercial applications. National Pipe and Plastics puts the safety of its staff first and looks to ensure equipment is well maintained, housekeeping is kept to the highest standard, employees are fully engaged, and safety issues are addressed timeously. You'll have the opportunity to join our Safety and Culture committees that put "People Before Pipe". National Pipe and Plastics focuses on employee engagement as a means to improve our working environment and create continuous improvement. You will be fully trained to operate and maintain material feeders, extruders and downstream equipment. Together with your line team support, you'll be responsible for the quality and output of your line. We at National Pipe and Plastics take pride in the quality of the products we produce for our customers and are looking for motivated individuals to come join our winning team. There is a $1000 Sign on Bonus. The first $500 is given after 3 months of employment; the remaining $500 is given after 6 months of employment. Job Responsibilities * Check daily production schedule and count-sheets in the office for any special instructions or changes * Check and record machine speeds, regrind silo levels, and all other pertinent information on logs provided * Check color barrels and hoppers so they do not go empty * Make proper adjustments on extruders and associated equipment if necessary * Frequent monitoring of extruder - back pressure, amps, screw and feeder speeds - so that limits are not exceeded * Frequent monitoring of extruder heats zones and vacuum at vent * Check product appearance and make adjustments as necessary * Assist all machine tenders in solving any unusual problems and producing a quality product * Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed Job Requirements * High School diploma or GED * Must communicate effectively both verbally and in writing with superiors, and colleagues * At least 2 years of experience in manufacturing, maintenance, construction, or related field * Ability to lift up to 50 lbs. Compensation * The hourly pay rate is $21 - $27/hr * Bonus opportunity * 401(k) plan / group retirement savings program * Short-term and long-term disability benefits * Life insurance * Health, dental, and vision insurance * Paid time off * Paid holidays What CRH Offers You * Highly competitive base pay * Comprehensive medical, dental and disability benefits programs * Group retirement savings program * Health and wellness programs * An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law. Date: Nov 19, 2025

The company built on breakthroughs. Join us. Corning is one of the world's leading innovators in glass, ceramic, and materials science. From the depths of the ocean to the farthest reaches of space, our technologies push the boundaries of what's possible. How do we do this? With our people. They break through limitations and expectations - not once in a career, but every day. They help move our company, and the world, forward. At Corning, there are endless possibilities for making an impact. You can help connect the unconnected, drive the future of automobiles, transform at-home entertainment, and ensure the delivery of lifesaving medicines. And so much more. Come break through with us. Corning's businesses are ever evolving to best serve our customers, industries, and consumers. Today, we accelerate and transform life sciences, mobile consumer electronics, optical communications, display, and automotive markets. We are changing the world with: * Trusted products that accelerate drug discovery, development, and delivery to save lives * Damage-resistant cover glass to enhance the devices that keep us connected * Optical fiber, wireless technologies, and connectivity solutions to carry information and ideas at the speed of light * Precision glass for advanced displays to deliver richer experiences * Auto glass and ceramics to drive cleaner, safer, and smarter transportation Corning Incorporated is seeking a skilled Machinist to join our team. Purpose of Position: This role supports research and development projects by fabricating and assembling prototype parts and equipment with precision and efficiency. Required Skills/Experience/Education: * Minimum of High School Diploma or GED required. * 4 years of applicable machine shop experience or military equivalent, or Journeyman or Class "A" status. * OR Minimum 2-year Machine Tool Technology degree. * OR Certificate in a relevant field with a minimum of 1-year experience. Key Responsibilities: * Fabricate and/or assemble prototype parts and equipment using ideas and designs. * Set up and operate a variety of machines including: o CNC Lathes o 3 and 5-axis CNC Mills o Wire EDM o Surface Grinders o Drill Presses o Manual Lathes o Manual Mills o Straight Vertical Milling Machines. * Write and/or edit existing machine programs to produce parts that meet design specifications and company quality standards. * Use precision measuring tools to inspect finished parts for accuracy. * Read and interpret blueprints, engineering drawings, and specifications. * Troubleshoot and resolve machining process issues. * Perform routine maintenance on machines and equipment. * Experience with Mastercam, SolidWorks, or NC programming software preferred. * 5-axis machining experience is preferred. Ability to work independently with minimal supervision. Job Information: * A basic demonstration of skills is required. * This position operates on 2nd shift. (2-10pm). * Probationary Period: New employees will go through a 90-day probationary period. * Union Representation: Production and Maintenance employees are represented by USW Local 1000. Additional Information: The employment process for all Production and Maintenance positions at Corning Incorporated in the Corning Valley begins once you attach your resume and submit a completed application. Upon successful completion of onsite interview and hands on testing, the next phase will include background checks, a physical assessment and drug testing. Corning Incorporated interviews applicants for self-managed teams and seeks individuals who exhibit a strong work ethic, interpersonal skills, and team participation abilities. This position does not support immigration sponsorship. The starting pay for this position is $36.46 hourly rate. Compensation and benefits available for this position are dictated by the appropriate Collective Bargaining Agreement. A job that shapes a life. Corning offers you the total package. Your well-being is our priority. Our compensation and benefits package supports your health and wellness, financial, and career from day one. * As part of our commitment to your financial well-being, we provide a 100% company-paid pension benefit that grows throughout your career. We also offer a 401(k) savings plan with company matching contributions. * Our health and well-being benefits include medical, dental, vision, paid parental leave, family building support, fitness, company-paid life insurance, disability, and disease management programs. * Company-wide bonuses and long-term incentives, align with key business results and ensure you are rewarded when the company performs well - when Corning wins, we all win. * Getting paid for our work is important but feeling appreciated and recognized for those contributions motivates us much more. That's why Corning offers a peer-to-peer recognition program to celebrate success by recognizing colleagues who demonstrate above-and-beyond behaviors. We prohibit discrimination on the basis of race, color, gender, age, religion, national origin, sexual orientation, gender identity or expression, disability, veteran status or any other legally protected status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. To request an accommodation, please contact us at accommodations@corning.com. Nearest Major Market: Corning

** Instron is a global organization that designs, manufactures, sells and services mechanical testing systems. Have you ever wondered how a potato chip always has the right crispiness level? Or, how your game controller will survive several drops whether you are excited for your win or upset by a loss? How about eyewear being able to withstand impact forces? Visit Instron's YouTube Channel (*********************************************** to see our customer's applications or watch our Culture video at ******************************************* . Check out Facebook Watch at **************************** for additional videos. Our systems are trusted by 95% of the world's largest manufacturing companies to gather critical data, informing the design of components and materials. You will find that our established strength, commitment to our core values and team focus provides an engaging work environment and offers exceptional opportunities for personal and career development. **Job Description** _Summary:_ With absolute minimum supervision, sets up and operates, safely and most efficiently, all available machine tools. Will manufacture a great variety of intricate parts, precision tools, jigs and fixtures, and assemblies. Uses considerable judgment and technical knowledge to accomplish the foregoing. _Principle Duties & Responsibilities:_ + Uses considerable independent judgment and technical knowledge in the manufacturing of machined parts, precision tools, jigs and fixtures, and assemblies. + Reads and interprets complex blueprints and sketches to perform any required machining operation to exact specifications. Produces high quality parts at high level of productivity. + Sets up and operates all available machine tools and miscellaneous shop equipment. May suggest and document alternative processing to efficiently utilize time and equipment. + Selects proper cutting tools and determines proper process for any given condition, obtaining optimum production and high quality by properly judging the following: a) amount of stock to be removed, b) rigidity of part and machine c) mechanical properties of material and cutter, d) speed and feed selection for maximum production and tool life. + Analyzes performance of tools, determines source of malfunctions and takes corrective action. Uses all precision measuring instruments such as micrometers, scales, verniers, calipers and depth gages. Checks and verifies the accuracy of all work performed and is responsible for consistent good quality. + Maintains work area, tools and equipment in a safe, clean and orderly condition. + Performs preventive maintenance on all shop equipment as required. + Assists in the training of lesser experienced machinists or trainees. _Knowledge, Skills & Abilities Required:_ + Ability to program, set-up and run CNC machines as well as set-up and run manual equipment in the shop. + Ability to read and interpret complex drawings and sketches. Must fully understand all methods of dimensioning and all symbols. Ability to comprehend and work to brief verbal instructions. Have good knowledge of shop math, including trigonometry, normally associated with a technical high school education, plus 5 years of machining experience. + Good broad knowledge of all materials generally used in the machine building industry (basic mechanical and chemical properties, machine ability, heat treat ability). + Knowledge of speed and feed rates _,_ their relationship to materials, tools and machines. Familiarity with all pertaining charts and tables. Ability to apply knowledge with good judgment to accomplish high production and quality. + Ability to operate all machine tools and ship equipment in the most proficient manner. Analytical ability to determine proper procedures and to select machines and tools to be used to obtain optimum efficiency. Knowledge and ability to grind all cutting tools. + Ability to manufacture any conceivable machine parts, tools, jigs and fixtures to sketches or verbal instructions. Knowledge and imagination to improve on given concepts and to design tools. This is normally acquired in 5 years of related experience. + Mechanical ability and manual dexterity to be able to perform all required duties with relative ease. Ability to occasionally cope with mental/visual strain associated with some precision jobs. + Physical stamina for standing during working hours and to safely handle all parts and accessories typical to machine shop operation. _Working Conditions:_ Normal Machine Shop environment with moderate temperature changes, medium to high noise levels and the hazards associated with a Machine Shop such as rotating cutting tools and workpieces, flying chips, coolant fumes, handing of parts with burrs and sharp edges. Such hazards require strict adherence to safety guidelines and use of protective devices such as safety glasses. _Reporting Relationship:_ Reports to Binghamton Supervisor of Machining or Group Leader of Machine Shop. **Compensation Information:** This position has a starting salary range of $23.80 to $32.20 per hour. Pay is determined by several factors, including a candidate's experience, relevant skills, and qualifications _ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential._ _As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship._ _All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws._

WHAT WE'RE DOING At Lockheed Martin, we're at the forefront of innovation, creating advanced technology and solutions that make a significant impact globally. Our team is dedicated to delivering precision-engineered products that meet the highest standards of quality and reliability. WHO WE ARE Lockheed Martin: An Award-Winning Place to Work THE WORK As a CNC Mill Machine Operator, you will play a crucial role in our manufacturing process, responsible for operating and maintaining CNC milling machines. Your tasks will include: Performing self-inspections on your parts using prescribed gauges, jigs, and fixtures to ensure they meet close tolerances. Utilizing Coordinate Measuring Machines (CMM) for inspections (CMM inspection ability sought but not required). Changing your own tools and adjusting compensations accordingly. Performing part deburring under a microscope to ensure quality assurance and mitigate Foreign Object Debris (FOD). b>WHY JOIN US Your Health, Your Wealth, Your Life As an employee at Lockheed Martin, your health and well being are paramount. From medical insurance, to legal help and tuition reimbursement, we provide benefits to improve your life. Come check out all of the amazing benefits Lockheed Martin has to offer. Learn more about Lockheed Martin's comprehensive benefits package Basic Qualifications • 2-5 years experience • Ability to read and interpret Engineering drawings. • Knowledge in CNC mill setup • Be able to inspect using general hand tools. • Quality driven individual able to support team environment. • Detail oriented with housekeeping and organization skills. Desired skills • GD&T knowledge • CMM/OMV inspection back ground • Ability to use web-based computer applications. • Ability to work in either team or individual environment. • Flexibility with work schedule and machine assignments. • Ability to support overtime as business needs dictate. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. * At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Other Important Information By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to work remotely Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedule Information Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $33,600 - $59,225. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. Pay Rate: The annual base salary range for this position in most major metropolitan areas in California, Massachusetts, and New York is $38,600 - $64,400. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.

If you're looking for a collaborative work environment with an established organization that also offers great employee benefits and career advancement opportunities, then we invite you to consider applying for a position with SURTECO. SURTECO specializes in the production and sale of laminates, foils and vinyl-coated fabrics. Our technologies, products and services deliver distinctive performance features, thus helping to support our Customers' reputations for trusted brands around the globe and in a wide variety of markets. We are seeking an individual who is passionate about joining a team in the manufacturing of high quality laminates and films used in a variety of applications including on cabinetry in kitchen and bath applications, countertops and paneling in recreational vehicles and in the enhancement of interior retail spaces. The Calender Mill Operator will perform various duties to operate the extruder and the mill to bring the plastic material from the mixing section and provide a steady supply of material to the calender. Key Responsibilities: Understand and utilize Calender and mill safety equipment and procedures Know and use required personal protective equipment (PPE) Understand RCRA and MSDS labeling and “Right to Know” requirements Know all Mill and Calender emergency procedures Know where all the emergency stops are located Mill, Extruder and Strainer start-up and shut-down Complete all head changes and technical changes, have a working knowledge of proper screen packs to utilize per product type Adjust and access machines for cleaning Monitor and maintain oil and fluid levels on mill and extruder Control temperature and feed rate of material Maintain housekeeping of the mill area/ organize all tools in mill area Rework hot and cold trim into mill Assist crew with calender functions Maintain a record of all scrap material taken off at the mill and other reports and paperwork required Manually work material on the mill if required Use all material handling equipment required Participate in start-ups, wrap-ups, etc. on calender line Report quality or task difficulties to supervisor, Calender Crew Leader or appropriate personnel Make crew leader aware of any conditions out of specifications of equipment Know the various thread pattens for all conveyors, driven mill and calendar roll on the calender Train and assist others as needed Operate forklift when necessary Learn skills, procedures or processes for advancement and improvement Work with Calender Crew Leader to optimize quality and output Maintain a clean, orderly, and safe work area Lead in changing Mill and calendar hot trim knives Store, identify and record rework and scrap Assist in buffing calender rolls Clean floor and take out trash Perform any additional duties as requested to meet business or production conditions or changes Understand the quality system and all quality procedures relevant to this position Assist the Calender Operator in maintaining a quality sheet Assist Calender Operator in completion of Calender pass on logs, reports, records, and all necessary paperwork Document and report all mechanical and electrical problems to Crew Leader, Supervisor, and maintenance Report any and all quality or task difficulties to Crew Leader and supervisor or personnel Available for OT as needed Required Knowledge/Skills/Abilities: Frequently communicates and exchanges work information with others Excellent organizational skills and attention to detail Basic computer skills to occasionally produce memorandum and other long documents Ability to work together as a team in a high-performance work environment to complete the job on time Mechanical aptitude Education and Experience: High school diploma or equivalent Physical Requirements: Must be able to lift 50 pounds as needed Frequently positions self to use/maintain personal protective equipment Prolonged periods of sitting at a desk and working on a computer Comfortable with working in a manufacturing environment alongside machines, equipment, etc. Ability to detect, distinguish, or determine the source of a smell Exposure or works around chemical processing, unregulated temperature, dusty conditions Desired Qualifications: Prior extruder experience Travel Requirements: Time spent away from home or typical office location. 0%☒ 10%☐ 20%☐ 30%☐ 40%☐ 50% or more☐ Company Statement: SURTECO North America is an Equal Opportunity employer committed to providing equal access to employment. We value diversity and inclusion and encourage all applicants to apply. In addition, the health and safety of those who contribute to business development is a priority. Open dialog with our employees is a matter of course, and the further development of their knowledge is a special concern. We enable them to find the right balance between personal and professional life. Disclaimer: The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as an exhaustive list of all duties, responsibilities, success profile characteristics or qualifications required of employees assigned to this job. Management retains the discretion to add to or change the duties of the Job at any time.

Kick start the interview process immediately by completing an AI interview by following the link below! Upload your resume and complete the short AI interview anytime - day or night. **************************************** Job Title: Machine Operator/Machinist III Department: Machining Location: Forkardt Hardinge - Elmira NY (Onsite) Shift: Various Shifts Employment Type: Full-Time Exemption Status: Non Exempt Company Overview Forkardt Hardinge is a leading provider of precision manufacturing solutions and tooling systems. We are committed to delivering high-quality products and exceptional service to our customers in the machining and manufacturing industries. Our team is dedicated to innovation, collaboration, and continuous improvement. Position Overview The Machine Operator III is a senior-level machinist responsible for independently operating, setting up, and troubleshooting a wide variety of CNC and manual machines. This role involves overseeing complex production processes, mentoring junior machinists, and ensuring the highest level of quality in finished products. This position is suited for individuals with advanced machining skills and leadership potential. Key Responsibilities Expertly set up, program, and operate CNC and manual machines for tight-tolerance production runs. Troubleshoot complex machine and tooling issues to minimize downtime. Inspect and verify conformance of machined parts using advanced measurement tools and techniques. Provide training, guidance, and technical support to lower-level machinists. Lead continuous improvement initiatives to increase production efficiency and product quality. Collaborate closely with engineers and supervisors on technical projects. Ensure all safety, quality, and production standards are met and maintained. Qualifications High school diploma required; vocational/technical certification preferred. Minimum of 5 years of experience as a machinist in a production environment. Understanding of precision measuring tools. Strong understanding of manufacturing prints and GD&T quality specifications. Skills & Requirements: Advanced expertise in CNC programming, machine setup, and precision machining. Strong troubleshooting abilities with an understanding of machining technologies. Excellent leadership, mentoring, and communication skills. Strong problem-solving skills and a commitment to continuous improvement. Ability to manage multiple tasks while maintaining a high level of accuracy. Ability to lift and manage materials up to 50 lbs. Physical Requirements: Ability to work in a manufacturing environment, including standing for extended periods. Ability to lift up to 30lbs and work with tools and machinery safely. Compensation and Benefits Pay Range: $29.00-$35.00/hour Comprehensive benefits package including: Health insurance Life insurance 401(k) retirement plan Paid time off Paid holidays Long-term disability insurance Work Environment Location: This position is onsite at our Elmira, NY facility Hardinge Inc. is an Equal Opportunity Employer, Veteran/Disability Updated 10.29.24

Like THREE DAY WEEKENDS? Relocation Assistance is available! Our client in Upstate, NY is looking for experienced CNC Machinists and CNC Grinders. This is for their 4 day Mon through Thurs 2nd shift. 2pm to 12:30am. CNC Mill (Machining/Milling), Lathe (Turning) or Grinding experience. Job Description: We are looking for a competent CNC Setup - Operator to use computer numerically controlled (CNC) machinery safely and accurately to perform a variety of functions. Your job is important since some materials are not easy to shape or handle manually or with conventional equipment. CNC Operators are highly skilled professionals, able to work with great concentration and precision. They must be responsible and comply with all safety guidelines. A keen eye for detail and great mechanical aptitude are also essential. The goal is to produce high quality parts and materials by setting up machines to perform the right operations. Responsibilities: Prepare and operate CNC machines to perform tasks such as drilling, grinding, milling, turning etc. Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc. Translate instructions into computer commands so the machines can perform the correct function Prepare and load raw materials and parts onto the machines Prepare a test run to check if the machines produce outputs according to specifications Set machines to complete full cycles to fabricate large number of parts Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly Check and maintain machinery daily to ensure functionality Requirements and skills: Proven experience as CNC operator Can edit at the machine via G&M codes Skill in operating CNC machinery and tooling as well as precision measurement tools Ability to read and interpret mechanical documents and drawings Computer savvy with basic understanding of computer programming and CAD/CAM is a huge plus! Very familiar with First Article Inspections - FAI Operating Tolerance down to .0005 of an inch. Mechanical aptitude and good math skills A keen eye for detail and results-driven approach Good communication abilities High school diploma or equivalent; certificate or diploma in engineering or relevant discipline is a plus Salary Range: Pay is commensurate on experience. Anywhere between $27hr and $40hr! Great bennies as well. Relo assistance is available! Those interested please respond to this ad with your latest resume. I look forward to speaking with you. This is an outstanding opportunity with a well established company in their industry. If you can't relo to upstate NY, that is OK send your resume anyway. SkillSource most likely has clients in your city as well. We place nationally. Free service to work with us and all correspondence is strictly confidential. We do NOT contact your current employer. We look forward to speaking with you!

What makes us strong? Our employees in 50 countries worldwide - all working with passion to enable high-tech applications with our strong metals: tungsten and molybdenum. Our GTP site in Towanda PA specializes in recycling tungsten and manufacturing premium quality tungsten powders-the essential first step in producing high-performance materials for global applications. We proudly support the U.S. aerospace and defense sectors by supplying strategic resources critical to national security and advanced manufacturing. Join a highly motivated team in Towanda, USA, where local expertise meets the global knowledge and values of the Plansee Group. Position type: Hourly Position Overview: Set up and operate machine shop tools and specialized machines without supervision to fabricate machine parts to close tolerances. Responsibilities: Lay out, interpret, and make sketches and simple scale drawings to fabricate machine parts. Make parts from complicated prints and drawings. Disassemble, repair, reassemble, and maintain production equipment. Make, assemble, and repair dies, jigs and fixtures for production equipment and machine tools. Perform bench operations. Sharpen tools. Transport materials and tools. Make production runs of complex parts. Notify designated personnel of any irregularities or unusual occurrences in process, materials, or equipment. Direct, instruct and train other employees while performing similar work, relaying preestablished directions or instructions. Maintain material identity. Maintain S.P.C., production, and other required records. Enter and retrieve data from computer terminal working with prescribed systems. Perform each phase of the operation in full compliance with all company, state, and/or federal safety and environmental regulations. Maintain orderliness and cleanliness of assigned area(s) and observe company policies at all times. Preferred Education and Experience: Graduate of 2 year Associate program or two year accredited trade school or equivalent. Prior incumbent of Machinist Apprentice or B Pass job related tests. Be familiar with the properties of various materials such as aluminum, brass, cast and wrought iron, tungsten, molybdenum, Various types of steel, bakelite etc. SPC training required Must demonstrate aptitude in the PA administered GATB Job Family IV of 50% minimum Equal Employment Opportunity We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. In order to conform with U.S. government regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)3, or eligible to obtain the required authorizations from the U.S. Department of State. Plansee Group USA

JOB SUMMARY/OBJECTIVE: The Compression / Injection Molding Operator will be responsible for setting up and operating compression and/or injection molding machines, inspecting the produced parts for defects, and maintaining and troubleshooting the machinery as necessary. Our ideal candidate has hands-on experience in an industrial setting and is familiar with the safety procedures and quality control standards related to compression and/or injection molding. KNOWLEDGE/SKILLS: Setting up and operating compression and/or injection molding machines in accordance with the production schedule. Inspecting the produced parts for quality and conformity with the specifications. Maintaining and troubleshooting the compression and/or injection molding machinery to ensure optimal performance. Documenting the production and inspection results accurately and in a timely manner. Assisting with the material handling and preparation as required. Adhering to all safety procedures and regulations within the plant. Performing other duties as assigned by the shift supervisor or manager. May include other duties as assigned and/or special projects. QUALIFICATIONS: High School Diploma or equivalent. Previous experience as a Compression and/or Injection Molding Operator or a similar role in a manufacturing setting is preferred. Knowledge of the operation and maintenance of injection molding machinery. A keen eye for detail and a commitment to quality control. Ability to follow written and verbal instructions accurately. Willingness to work in shifts and during weekends if necessary. Physical fitness and the ability to lift heavy items. WORK ENVIRONMENT: Plant setting. The role involves physical work and may require lifting heavy items or standing for extended periods. Adheres to established safety practices, environmental management, and quality systems requirements. HOURS: FULL-TIME Benefits: company offers comprehensive benefits options MUST BE ABLE TO COMMUTE: Binghamton, NY (Required) WORK LOCATION: In person i3 Assembly/SureScan is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state, or federal law. This policy applies regarding all aspects of one's employment, including hiring, transfer, promotion, compensation, eligibility for benefits, and termination.

JOB SUMMARY/OBJECTIVE: The Compression / Injection Molding Operator will be responsible for setting up and operating compression and/or injection molding machines, inspecting the produced parts for defects, and maintaining and troubleshooting the machinery as necessary. Our ideal candidate has hands-on experience in an industrial setting and is familiar with the safety procedures and quality control standards related to compression and/or injection molding. KNOWLEDGE/SKILLS: Setting up and operating compression and/or injection molding machines in accordance with the production schedule. Inspecting the produced parts for quality and conformity with the specifications. Maintaining and troubleshooting the compression and/or injection molding machinery to ensure optimal performance. Documenting the production and inspection results accurately and in a timely manner. Assisting with the material handling and preparation as required. Adhering to all safety procedures and regulations within the plant. Performing other duties as assigned by the shift supervisor or manager. May include other duties as assigned and/or special projects. QUALIFICATIONS: High School Diploma or equivalent. Previous experience as a Compression and/or Injection Molding Operator or a similar role in a manufacturing setting is preferred. Knowledge of the operation and maintenance of injection molding machinery. A keen eye for detail and a commitment to quality control. Ability to follow written and verbal instructions accurately. Willingness to work in shifts and during weekends if necessary. Physical fitness and the ability to lift heavy items. WORK ENVIRONMENT: Plant setting. The role involves physical work and may require lifting heavy items or standing for extended periods. Adheres to established safety practices, environmental management, and quality systems requirements. HOURS: FULL-TIME Benefits: company offers comprehensive benefits options MUST BE ABLE TO COMMUTE: Binghamton, NY (Required) WORK LOCATION: In person i3 Assembly/SureScan is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state, or federal law. This policy applies regarding all aspects of one's employment, including hiring, transfer, promotion, compensation, eligibility for benefits, and termination.

Instron is a global organization that designs, manufactures, sells and services mechanical testing systems. Have you ever wondered how a potato chip always has the right crispiness level? Or, how your game controller will survive several drops whether you are excited for your win or upset by a loss? How about eyewear being able to withstand impact forces? Visit Instron's YouTube Channel to see our customer's applications or watch our Culture video at ******************************************** Check out Facebook Watch at **************************** for additional videos. Our systems are trusted by 95% of the world's largest manufacturing companies to gather critical data, informing the design of components and materials. You will find that our established strength, commitment to our core values and team focus provides an engaging work environment and offers exceptional opportunities for personal and career development. Job Description Summary: With absolute minimum supervision, sets up and operates, safely and most efficiently, all available machine tools. Will manufacture a great variety of intricate parts, precision tools, jigs and fixtures, and assemblies. Uses considerable judgment and technical knowledge to accomplish the foregoing. Principle Duties & Responsibilities: Uses considerable independent judgment and technical knowledge in the manufacturing of machined parts, precision tools, jigs and fixtures, and assemblies. Reads and interprets complex blueprints and sketches to perform any required machining operation to exact specifications. Produces high quality parts at high level of productivity. Sets up and operates all available machine tools and miscellaneous shop equipment. May suggest and document alternative processing to efficiently utilize time and equipment. Selects proper cutting tools and determines proper process for any given condition, obtaining optimum production and high quality by properly judging the following: a) amount of stock to be removed, b) rigidity of part and machine c) mechanical properties of material and cutter, d) speed and feed selection for maximum production and tool life. Analyzes performance of tools, determines source of malfunctions and takes corrective action. Uses all precision measuring instruments such as micrometers, scales, verniers, calipers and depth gages. Checks and verifies the accuracy of all work performed and is responsible for consistent good quality. Maintains work area, tools and equipment in a safe, clean and orderly condition. Performs preventive maintenance on all shop equipment as required. Assists in the training of lesser experienced machinists or trainees. Knowledge, Skills & Abilities Required: Ability to program, set-up and run CNC machines as well as set-up and run manual equipment in the shop. Ability to read and interpret complex drawings and sketches. Must fully understand all methods of dimensioning and all symbols. Ability to comprehend and work to brief verbal instructions. Have good knowledge of shop math, including trigonometry, normally associated with a technical high school education, plus 5 years of machining experience. Good broad knowledge of all materials generally used in the machine building industry (basic mechanical and chemical properties, machine ability, heat treat ability). Knowledge of speed and feed rates , their relationship to materials, tools and machines. Familiarity with all pertaining charts and tables. Ability to apply knowledge with good judgment to accomplish high production and quality. Ability to operate all machine tools and ship equipment in the most proficient manner. Analytical ability to determine proper procedures and to select machines and tools to be used to obtain optimum efficiency. Knowledge and ability to grind all cutting tools. Ability to manufacture any conceivable machine parts, tools, jigs and fixtures to sketches or verbal instructions. Knowledge and imagination to improve on given concepts and to design tools. This is normally acquired in 5 years of related experience. Mechanical ability and manual dexterity to be able to perform all required duties with relative ease. Ability to occasionally cope with mental/visual strain associated with some precision jobs. Physical stamina for standing during working hours and to safely handle all parts and accessories typical to machine shop operation. Working Conditions: Normal Machine Shop environment with moderate temperature changes, medium to high noise levels and the hazards associated with a Machine Shop such as rotating cutting tools and workpieces, flying chips, coolant fumes, handing of parts with burrs and sharp edges. Such hazards require strict adherence to safety guidelines and use of protective devices such as safety glasses. Reporting Relationship: Reports to Binghamton Supervisor of Machining or Group Leader of Machine Shop. Compensation Information: This position has a starting salary range of $23.80 to $32.20 per hour. Pay is determined by several factors, including a candidate's experience, relevant skills, and qualifications ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

Eaton's EPG CPD PCD Power Components Division division is currently seeking a 3rd Shift Machinist. is $21.99 - $32.37 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: Perform a variety of set up, operation, inspection and preventative maintenance specific to daily machinists' functions (such as coolants, oil, visual inspections pertaining to the machines) on all machinery in the parts manufacturing environment. Continually strive for cost effective machining practices, such as eliminating scrap parts and set up time reduction. Tools & Equipment All production and/or support equipment and tools required for machining, set up, parts modification, inspection and inventory. Materials Materials called for by part specification or technical direction, including all cutting tool materials. Direction of Others Instruct, demonstrate and oversee persons in other related jobs within the parts manufacturing environment and take necessary corrective actions when required. Working Procedure 1) Receive oral and written information from area supervisor area engineer or programmer and perform needed operations per instructions. 2) Set up, adjust and maintain set up on all production machinery in the parts manufacturing environment. 3) Set up and operate production or support machinery to modify parts per appropriate specifications, making necessary inspection check to ensure conformance to quality standards. 4) Monitor progress of work throughout departments to ensure compliance with specifications. Re-write or edit part program data when necessary. 5) Develop fixtures, clamping devices and non-standard machine tooling when necessary. Work without M.P.s as required. 6) Maintain necessary production and inventory records with the use of a personal computer, including but not limited to: run-time data, S.P.C. and machine program downloading following Kanban guidelines. 7) Perform specified preventative maintenance as required. 8) Follow and maintain safety rules and practices. 9) Perform required housekeeping tasks to maintain a clean and orderly work environment. Qualifications: Required (Basic) Qualifications: * High School Diploma or GED Equivalent from an accredited institution. * Successful completion of certified and/or in-house apprenticeship program, trade school certificate and/or 2+ years of experience. #LI-JW1 #IND123 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

At Incodema3D, we are creating a culture and organization that is truly unique. We focus on innovative additive manufacturing technology in support of aerospace, defense, and other industrial applications. We value the commitment of our employees and strive to create a positive working environment where people can do their best. We are seeking a highly motivated and detail-oriented CNC Machinis t to join our dynamic Machining team. In this role, you will be a key player in bridging the gap between innovative additive manufacturing and the demanding requirements of precision machining. This is a fulltime position working Monday through Friday from 6:00am until 2:30pm. What you'll do: You will be responsible for the hands-on machining of complex, additively manufactured parts, transforming them into finished products with exacting specifications. Your role will involve: Precision and setup : Perform complex machine setups, including selecting and loading the appropriate tools, fixtures, and materials for advanced CNC mills, lathes, and other machinery. Blueprint mastery : Interpret and translate complex technical blueprints, drawings, and CAD/CAM files, applying your strong knowledge of GD&T to determine the most effective machining methods. Real-time adjustments : Operate and monitor advanced CNC equipment, running programs, performing measurements, and making real-time adjustments to ensure all parts meet precise tolerances. Expert troubleshooting : Proactively diagnose and resolve machine malfunctions or process issues to minimize downtime and maintain impeccable production quality. Quality assurance : Conduct meticulous dimensional inspections using precision instruments like micrometers, calipers, and gauges, documenting all data according to quality plans. Operational readiness : Manage job status and time, including requisitioning necessary tooling to ensure you and your team are always ready for the next challenge. Safe and organized workspace : Uphold the highest safety protocols, perform routine machine maintenance, and maintain a clean, organized workspace. Who you are: Your qualifications A high school diploma or GED equivalent. At least 4 years of hands-on experience setting up and operating CNC mills, lathes, and machining centers (e.g., HAAS or similar controls). Demonstrated expertise in reading and interpreting complex blueprints and CAD files, with a strong working knowledge of GD&T. Proficiency with precision measuring equipment, including calipers, micrometers, digital indicators, and gauges. Strong computer skills, with experience in G-code editing and CAM software. Exceptional problem-solving and troubleshooting skills, a strong attention to detail, and a high degree of accuracy. Excellent interpersonal and communication skills for effective team collaboration. Benefits: Competitive salary Health and dental insurance Paid company holidays Paid time off 401K retirement plan Equal Employment Opportunity: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. In the event you require special assistance or an accommodation to apply due to a disability, please contact us at **************. ITAR Requirements: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3),or eligible to obtain the required authorizations from the U.S. Department of State. Sponsorship is not available.

Our client is a leading international provider of advanced metal-cutting solutions. They provide a full spectrum of highly reliable CNC turning, milling, and grinding machines as well as technologically advanced workholding and machine tool accessories. Position Overview: This position is responsible for providing quality CNC programs, tooling, fixtures, and gauges required for CNC machining equipment to produce components safely, efficiently, and accurately. The CNC Programmer/Machinist spends approximately 40-50% of their time developing and documenting CNC programs, 10-20% designing and procuring fixtures, gaging, and tooling, and 40-50% setting-up and qualifying programs and completing the operation (including inspection). Familiarity with Lean Manufacturing work area practices including 5-S, Visual Controls, Standard Work, work center metrics, and continuous improvement processes and supports team members in these processes. While performing all duties and responsibilities, the successful candidate will, at all times, model Company values and principles and act in a manner consistent with the Company Code of Conduct and Ethics. Specific Technical Knowledge: Experience producing tight tolerance components in a Tool Room environment. Experienced in CNC machining processes, programs, set-ups, monitoring, change-overs, etc. using a wide variety of machine tools. (CNC Cylindrical Grinding is a plus.) Three to five years of experience with CAD/CAM (AutoCAD, Inventor, MasterCam, SmartCAM or equivalent software programs) Working knowledge of a wide variety of inspection devices.( Set-up / Operation / Programming of CMM is a plus) Strong written and verbal communication skills and the ability to work cooperatively with other team members. Willingness to learn and (at times) teach others. Skills & Qualifications: Two-year degree from a technical school majoring in Machine Tool Technology, Automated Manufacturing, or similar degree program with formal training in CNC programming and operation. Experience will also be considered.

I have a client located in the Montrose, PA area that has an opportunity for a CNC Operator. If you or any of your colleagues are interested in discussing this role please click Apply Now. In this role you will be working as a CNC Machinist for a company in the manufacturing industry. This position is responsible for operating CNC Lathes and Mills. This is a direct hire role that must be performed on-site. Job Opportunity: 1+ years of experience operating a CNC Lathe Mills experience is a plus Must be able to work a first shift schedule #VIS

NOTE: We are NOT actively hiring for this position but are accepting applications for future hiring needs. Cameron offers a great benefit package that includes: Medical, Dental, Vision, Prescription, Life Insurance, Voluntary Life Insurance, 401(K) with Match, Incentive Program. Cameron is 100% an ESOP Company. To learn more about Cameron Manufacturing & Design please visit ****************** Pay Range: $22.92 - $31.45 Per Hour Position: The main function is the capability of the safe set-up and operation of various machines, including lathes and mills. Duties and Responsibilities: Ability to read blueprints. Capable of performing complex set-ups and minor machine adjustments including weldments, assemblies, ect as necessary. Lathe Mill Manual and CNC machines CNC Programming Responsible for performing in-process quality control checks. Ability to use inspection equipment. Ability to write & read complex programs at the machine Knowledge and understanding of GD& T Knowledge of tools and usages, along with providing your own. Knowledge of materials and usages. Assist with other employees in all processes noted above, working in conjunction with Supervisor duties as assigned. Follow all safety rules on machinery and in the shop. Mastercam experience necessary.