Numerical control operator jobs in Saint Marys, PA

Stable Johnstown precision shop expanding into a new facility with modern Haas lathes. We're hiring a CNC Lathe Setup/Operator who can set up jobs, run parts to print, and take pride in clean, consistent work. Direct hire role with real long-term growth. Schedule: Mon-Fri, 7:30am-4:00pm (optional OT) Pay: $25-$35/hr to start based on experience + 90-day review You'll be doing full setups, offsets, tooling changes, blueprint work, tight-tolerance machining, and in-process inspection in a well-run, team-first shop. Message me with your Haas lathe setup background or apply through Kipe Recruiting.

Giffin Interior & Fixture, Inc. - Pittsburgh, PA On-site (Pittsburgh) with occasional remote flexibility Giffin Interior is a nationally recognized architectural millwork manufacturer based just south of Pittsburgh. We build high-end commercial interiors and custom projects, and we're looking for a Millwork Engineer / CNC Programmer to join our Pre-Production team. This role blends engineering, machining logic, and real-world buildability to support our shop, production efficiency, and overall project success. As an INNERGY powered company, our estimating, project management, drafting, purchasing, engineering, production, and install workflows are fully connected, supporting accuracy, speed, and consistent information from estimate to install. What You'll Do Translate approved shop drawings into accurate engineering models and CNC-ready machining data. Produce clean, consistent programming for nested-based routers, 5-axis equipment (Stiles / Homag), and our panel saw. Ensure buildability, AWI compliance, and alignment with Giffin's standard construction methods. Identify design conflicts early and collaborate closely with Drafting, Engineering, Production, Project Management, and Purchasing. Prepare complete Work Order packages including machining details, hardware notes, and cut-related information. Support the shop with troubleshooting, clarifications, and technical adjustments as needed. Contribute to ongoing efforts to improve quality, throughput, and machine efficiency. What We're Looking For Experience in architectural millwork, casework, store fixtures, or other custom / engineer-to-order fabrication. Proficiency with Microvellum (or other library-based engineering systems), plus strong AutoCAD skills. CNC programming background; experience with Homag/WoodWOP is a plus. Solid understanding of commercial AWI standards and typical millwork construction methods. Strong ability to read drawings and translate concepts into accurate build instructions. Organized, detail-oriented, and comfortable managing multiple active projects. A team-player mindset and a drive for quality, accuracy, and continuous improvement. We will also consider experienced fabricators/carpenters who have strong real-world AutoCAD skills (not just introductory training) and want to grow into engineering/CNC programming. Candidates from both union and non-union backgrounds are welcome-skill and capability matter most. What We Offer Above-industry-average compensation based on experience and capability. Full benefits package (info available upon request) and regularly available overtime. Standard schedule: 6:00 AM - 2:30 PM, Monday-Friday (OT available). Modern equipment and tooling-including CNC automation, StoreTeq material handling, 5-axis capability, panel saw optimization, and a growing engineering/technology stack. A strong culture built around EOS (Entrepreneurial Operating System)-clear accountability, stable processes, healthy team dynamics, and companywide transparency. A family-owned company with 40+ years of stability, investing heavily back into people, technology, and capability. The chance to work on unique, high-profile commercial projects that rarely repeat.

AW Miller Technical Sales is a privately held, family owned and operated supplier of CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. AW Miller has been in operation for 50+ years and prides ourselves in providing the best quality machines and service in the industry. Our customer base is located in Pennsylvania, New York, New Jersey, Maryland, Delaware, West Virginia and Canada. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. We help you make better parts, more efficiently, less expensively. AW Miller is looking for a Qualified CNC Machine Tool Service Technician for the Eastern Pennsylvania operation. Job Responsibilities: Field Service Technician will have an extensive understanding of electrical, pneumatic, and hydraulic schematics to effectively detect and resolve issues with electrical and mechanical components. Duties include but are not limited to: Traveling to customer sites to install, troubleshoot, repair, and maintain all CNC machine tool equipment and controls for customer organizations. · Utilizing machine tool manuals, technical documents, internal and vendor resources to research machine issues · Ensuring proper documentation is completed and submitted to office and customer in regards to status of machine issues, repairs, and installation · Promoting and performing preventative maintenance on customer machine tool equipment and conducting after-sales technical support and training · Possessing and maintaining an in-depth knowledge of machine tool industry and product lines represented by the company Job Requirements: Minimum of three years' experience with a machine tool builder or distributor, a factory maintenance technician would also be considered. Experience with Microsoft Office Suite Ability to read and interpret drawings and schematics are required Excellent technical, communication, and presentation skills are a must The Field Service Technician must be able to meet the physical requirements of the job This position requires flexible hours and driving throughout a regional territory Experience with Mazak and Mitsubishi Controls. Other Manufactures and Controls will be considered Thorough knowledge of electrical components for CNC and manual machine repair in a manufacturing environment Prior Mechanical repair and alignment procedures a plus Ability to read drawings and wiring diagrams both printed and electronic Strong troubleshooting skills

Qualification Requirements: Physical Requirements: Good hearing and able to communicate effectively. Able to work comfortably in dangerous work environments. Requirements: Must be at least 18 years of age. Able to identify shop safety hazards. Strong knowledge of safety requirements. Attention to detail. Knowledge of metals and their properties. Ability to produce high quality work. Able to understand spoken and written English effectively. Able to pass post offer substance testing. Essential Functions: Uses a variety of tools to measure, calculate, cut and modify materials. Processes skills and knowledge to safely operate machine shop tools and equipment. Follows established manufacturing methods using standard machine tools, materials and equipment. Adjusts feeds, speed, and depth of cut to machine quality. Reads diagrams and blueprints and manufactures metal parts to precise specifications. Set up tools such as milling machines, grinders, lathes and drilling machines. Correctly use precision measuring tools. Routinely maintains equipment to ensure cleanliness, accuracy and reliability. Physical Demands: Physically demanding job which requires lifting heavy objects, twisting, bending and reaching. Must be physically agile and able to work in confined spaces as well as high elevations. Work Environment: Exposure to varying extreme climates and outside weather conditions (heat/cold, wet/humid). BE SURE TO APPLY ON OUR WEBSITE: ****************

Level A Underground Solutions, LLC is a trusted provider of high-quality Air and Hydro vacuum excavation services, formed from the foundation of an experienced SUE (Subsurface Utility Engineering) support service provider. Working collaboratively with civil engineers and utility locators, the company helps clients avoid the challenges of large capital investments and truck maintenance by offering dependable vacuum excavation solutions. As a family-owned business, Level A focuses on vacuum excavation, enabling engineering and utility locating firms to concentrate on their core expertise. With years of experience and a variety of equipment options, the company ensures tailored solutions for diverse customer projects. Level A is committed to delivering superior service and supporting clients efficiently. Role Description This is a full-time, on-site role for a Hydrovac Operator based in Garnet Valley, PA. The Hydrovac Operator will perform vacuum excavation services, operate and maintain heavy equipment, and ensure safe worksite practices. Responsibilities include conducting excavation tasks using hydrovac trucks and collaborating with clients and team members for project success. This role requires adherence to safety guidelines and maintaining the equipment to the highest standards. Qualifications Experience in Excavation and operating Hydrovac trucks. Strong Customer Service skills with the ability to collaborate effectively Valid CDL driver's license Ability to work in a physically demanding environment and in varying weather conditions Commitment to workplace safety and teamwork Previous experience in vacuum excavation or related field is a plus

Monumental is automating on-site construction with robotics and software. Our mission is to make construction primarily software-defined and work towards a future where beautiful, bespoke buildings are built within a single day with minimal labour. We're a growing team (about 100 team members) of mostly engineers and technicians, coming from companies like Palantir, Qualcomm, Dyson, Shopify, Tesla, Meta and 1X. It's still the early days of building the company, and this is a unique opportunity to be an early employee in a high-growth, high-ambition startup environment. From Day 1, you'll be able to work with an experienced founding team backed by top-tier investors. Monumental is based near Artis zoo in the Plantage, in the city center of Amsterdam. We have a beautiful office with an in-house workshop and robot testing facility. We're explicitly not a hybrid or remote-first company: we enjoy collaborating 5 days a week at the office. You can read more on why we believe you should spend your time working on construction, and learn more about our vision and company. You might also enjoy seeing this video by Andreas Klinger of what our office environment looks like. About you and this role We are looking for a Construction Robot Operator to join our team, bringing robots and automation to the construction industry to create affordable, beautiful, high-quality housing for everyone. This is an exciting and novel role where you'll be responsible for building brick walls with our construction robots. Given that this is a completely new role with novel technology, we naturally don't expect any prior experience. We're looking for people who enjoy working with new technology while (potentially literally) having their feet outside in the mud. You will be helping bring our construction robots to life, testing them both in our office and running them in production at real construction sites. This is a unique opportunity to be able to work in a high-tech environment, but not spend your entire day behind a desk. At the end of a successful day, you will have contributed to building tangible things in the real world that people will work and live in, with cutting-edge technology. This role is available both as a full-time or part-time contractor (ZZP'er) and as a full-time employee. We are unable to support relocation for this role. Applicants must be based in the Netherlands and able to commute onsite to Amsterdam to be considered, we are able to provide visa sponsorship for local candidates. What you'll be working on * Prepping a (real or test) construction project: understanding what needs to be built, where it needs to be built, and scoping site conditions * Preparing the site by placing markers and taking photos for 3d reconstruction * Operating our construction robots using our in-house software system on a laptop * Taking notes as the system runs to enable continuous product improvement * Working with our engineering and manufacturing teams whenever more complicated issues arise to resolve them * Various small construction tasks, e.g. inserting anchors, moving bricks around. * Being the face and ambassador of the company on a construction site. Our robots don't talk so people will typically chat to you. What we're looking for * A technical and analytical mindset. We don't expect you to have an engineering degree, but you understand the difference between hardware and software and when something goes wrong in our system you know how to reason about where it went wrong along the stack. Your friends probably come to you for tech support when something is broken. * You love getting your hands dirty and don't want to sit behind a computer all-day. You will frequently wake up early to drive to a construction site on-time and enjoy being in that context. Previous experience on a construction site is a strong plus. * You are outcome and detail oriented. You understand that running the robots for a day but leaving with dirt and stains everywhere is still a failure when we're building a house that someone will live in. * You have a drivers license and are comfortable driving a van. * You're fluent in English (spoken and written). Being verbally fluent in Dutch is a plus on a construction site but not a requirement. Why Monumental? Joining Monumental means being at the forefront of a movement aimed at making significant strides in the construction industry. Here, your work has the potential to impact not just the company but the future of how we build. If you're driven by innovation, eager to tackle complex challenges, and ready to make a tangible difference, we want to hear from you. For open applications (where you don't see an exact role match), please reach out to us at: ************************* - share with us the most interesting or challenging project you've worked on, why you want to join and your CV or portfolio. If you don't meet all the qualifications here but are excited about Monumental and feel you'd still be able to help us solve difficult problems, do get in touch. We are open to generalists with a demonstrated ability to focus on outcomes and get things done and are comfortable with you learning things as you go along.

Laboratory Testing Inc. (LTI), a leader in material testing and precision machining and a 2025 Top Workplace as recognized by The Philadelphia Inquirer, is seeking an experienced CNC Lathe Operator, III to join our machine shop team. The Lathe Operator III is responsible for programming, setup, and operation of CNC lathes while ensuring quality, efficiency, and compliance with all machining and QA requirements. The ideal candidate is a hands-on technical expert who enjoys troubleshooting, mentoring other machinists, and producing high-quality parts in a fast-paced, collaborative environment. This position plays a key role in maintaining best machining practices and supporting continuous improvement across the lathe area. This is a 1st shift role working Monday to Friday from 6:30am to 3pm, at our facility in Hatfield, PA. Responsibilities * Performs programming and machine setup function as directed by the shop supervisor. * Troubleshoot and optimize new programs to ensure efficient overall production and quality. * Performs all types of machining operations as assigned by the Machine Shop Supervisor. * Operates multiple machines during a normal workday. * Assist other machine operators ensuring that parts produced are being inspected and meet quality standards. * Inspect parts to ensure they meet drawing and specification requirements using proper measuring instruments. * Shares expertise and knowledge throughout the lathe area and be a focal point for advice on machining. * Help operators make the most efficient use of machinery and equipment by helping them with proper feeds and speeds. * Be proactively aware of workload and plan tooling and material requirements for future jobs ensuring minimum downtime. Inform shop supervisor of tooling required as needed. * Manufacture jigs and fixtures to improve productivity and accuracy. * Assist in the progression of training and planned development for all machinists. * Ensures that the shop equipment and instruments within the lathe area are functioning properly and in calibration prior to performing any work. Informs the supervisor whenever any equipment is found to be out of calibration or in need of repair. * Troubleshoots problems and takes corrective action, as necessary and appropriate and within guidelines as established by the supervisor or manager. * Assists with maintaining shop equipment. This includes cleaning the equipment, performing preventive maintenance as scheduled, filling out maintenance logs, and performing repair maintenance as required. Additional Responsibilities * Maintains assigned work area(s) in a clean, organized, and safe condition at all times. * Maintains traceability of materials and parts during operations. * Follows all applicable and required specifications and procedures, ensuring accuracy and compliance to machining requirements. * Understands and complies with LTI's QA Program at all times. * Participates in monthly machine shop team meeting. * Seeks clarification when specifications or directions are unclear. * Complies with all company policies and procedures at all times. * Follows all safety rules and regulations at all times and utilizes personal protective equipment, as required. * Performs other duties and responsibilities as assigned or directed by the Machine Shop Supervisor or the Manager. Qualifications: * Must possess a high school diploma or GED. * Must possess at least 5 years' experience of working unaided on setting up and operating CNC Lathes. * Minimum of 5 years' experience of troubleshooting machines and equipment making basic repairs and adjustments or working with service vendors. * Minimum of 2 years of basic programming. * Excellent attention to detail. * Ability to work well in a team environment. * Ability to process work with accuracy in a fast-paced environment. * Ability to work with minimal supervision. * Must meet citizenship eligibility required by accrediting bodies. This position requires use of information or access to processes subject to national security controls under U.S. export laws including but not limited to International Traffic in Arms Regulations (ITAR). In accordance with ITAR, to be qualified to work in this facility, applicants must be a US Person, which is defined as a US National, US Permanent Resident, and certain categories of Asylees and Refugees. LTI is the recipient of the Top Workplaces Award by the Philadelphia Inquirer and offers a full and comprehensive benefit package which includes Health, dental, 401k with company match, LTD, STD, Company Paid Holidays, Paid Time Off (PTO), advancement opportunities, and more! LTI is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, sexual orientation, disability, age, or any other legally protected status. If you have a disability and need assistance completing an application, please reach out to Human Resources at ************************ or ************ x 2125. * We are not working with agencies and are unable to offer sponsorship at this time.

About Us Asylon is a dynamic team that is passionate about robots and committed to building products to solve the greatest challenges facing the robotics and security industries. Asylon was founded in August 2015 by three MIT aerospace engineers who have worked on a variety of projects in the aerospace industry from the V-22 Osprey to commercial jet engines to defense systems on Navy destroyers. With our team's strong background in aerospace, Asylon is well-positioned to develop products consistent with the quality standards demanded by commercial and military customers. The robotics industry is poised to disrupt a variety of traditional industries, and, with that, comes the opportunity to solve new and interesting problems. We are building a diverse team that has a hunger for creating solutions and providing services using robots that have not been done before. Asylon is the perfect place for those that wish to apply their expertise to revolutionize industries while encountering opportunities to expand their own skillsets. Product Robotic Perimeter Security Asylon is developing field deployable infrastructure to support the use of automated robots to augment the security teams of our clients. We believe that the true advantages come when we can have robots and humans working hand-in-hand to increase security and help save lives. We see robots as a means to an end for delivering actionable, timely, and persistent intelligence. DroneCore, our full stack aerial and ground robotics solution, is revolutionizing the way the security industry operates, providing capabilities to security teams that they have never had before. Position This position is part of our Robotics Security Operations Center (RSOC) team and will be assigned to further the security mission within the client's property and airspace. From within the RSOC located at our headquarters, this position is responsible for teleoperating both ground and aerial robots to conduct preplanned security patrols, respond to perimeter alarms, and monitor live video feeds across all client sites. This position will, under general direction, serve to identify and respond to security incidents, threats, and other risks to clients' facilities and employees. This position will also respond to security incidents such as the triggering of alarms and intrusion detection sensors. This position may be required to assist drone and robot operators with technical analysis and weather briefings. The ideal candidate will have prior experience of working in a similar control room or security operations center environment. It is essential that they have an ability to maintain good relationships, a good team work ethic, and have a passion for technology. They will be expected to have an ability to operate with limited supervision and have familiarity with some of the technical principles associated with a modern security operations center and autonomous vehicle infrastructure. Specific Duties and Essential Functions: * Remotely operate Asylon's drones and ground robots conducting preplanned patrols at various customer sites throughout the United States * Respond to triggered perimeter alarms * Maintain communication with drone operators in the field * Coordinate with client security teams * Assist in troubleshooting and field maintenance * Maintain accurate logs of patrols conducted each shift Minimum Requirements: * High school diploma or equivalent * Ability to read, write, and communicate in English * Strong communication skills * Proficient in the use of computers and web-based applications * Proficient in handling video game console controllers Preferred skills: * FAA Part 107 license * Experience with drones * Experience with robotics * Prior physical security experience Job Type: Full-time Pay: From $20.60 per hour Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Life insurance * Paid time off * Vision insurance Schedule: * 8 hour shift * Day shift * Evening shift * Holidays * Night shift * Overnight shift * Overtime * Weekend availability Ability to commute/relocate: * Norristown, PA 19401: Reliably commute or planning to relocate before starting work (Required) Education: * High school or equivalent (Preferred) Experience: * Computer Skills: 1 year (Preferred) Language: * English (Required) License/Certification: * FAA Part 107 license (Preferred) Shift availability: * Day Shift (Preferred) * Night Shift (Preferred) * Overnight Shift (Preferred) Work Location: In person Asylon is an Equal Opportunity Employer. We recruit, hire, employ, train, promote, and compensate individuals based on job related qualifications and abilities. At Asylon we have a longstanding policy of providing a work environment that respects the dignity and worth of each individual and is free from all forms of discrimination, including harassment, because of race, color, sex, gender, age, religion or religious creed, national origin, ancestry, citizenship, marital status, sexual orientation, gender identity, gender expression, genetic information, physical or mental disability, military or veteran status, or any other characteristic protected by law. We are an inclusive organization and actively promote equality of opportunity for all with the right mix of talent, skills and potential. We welcome all applications from a wide range of candidates. Selection for roles will be based on qualifications, merit, and business need alone. Job Type: Full-time Pay: $21.00 per hour Expected hours: 40 per week Benefits: * 401(k) * 401(k) matching * Dental insurance * Employee assistance program * Health insurance * Life insurance * Paid time off * Parental leave * Retirement plan * Vision insurance Schedule: * 8 hour shift * Evening shift * Holidays * Night shift * Overnight shift * Overtime * Weekends as needed Supplemental Pay: * Bonus opportunities Shift availability: * Night Shift (Preferred) * Overnight Shift (Preferred) * Day Shift (Preferred) Ability to Commute: * Norristown, PA 19401 (Required) Ability to Relocate: * Norristown, PA 19401: Relocate before starting work (Required) Work Location: In person

Hours: Full time Salary: $22 per hour OUR MISSION: To tackle the growing e-waste problem, Molg enables circular manufacturing with robotics and design. Its robotic microfactories can autonomously disassemble complex electronic products, and the team partners with leading manufacturers to design electronics with reuse in mind - ensuring one product's end is another's new beginning. Molg combines advanced robotics and intelligent software to transform how electronics are manufactured and recovered. Working with partners like HP and Dell, leading hyperscalers, and industrial companies such as ABB and Stanley Black & Decker, Molg's solutions recover valuable materials from existing devices while helping create the next generation of products optimized for circularity. This dual focus on recovery and design innovation drives Molg's mission to keep materials in use and reduce waste. IN THIS ROLE YOU WILL: Have a great opportunity to get practical hands-on experience working in a robotics and climate-focused company. This role is on-site at our facility in Greencastle, PA. Working with a cross-functional team of software, mechanical, electrical, and robotics engineers, you will be running, supervising, and documenting operations of Molg's microfactories. As a Robot Operator, you will be responsible for: Running, supervising, and documenting operations across a range of automated disassembly processes. Collecting data on process success, failures, and areas for improvement. Resetting systems and equipment as needed to maintain operations. Collaborating with engineers on testing, troubleshooting, and developing system improvements. Supporting the release of new features and upgrades into production. WHO YOU ARE: You are passionate about robotics and manufacturing, and you bring reliability, attention to detail, and a hands-on mindset to your work. Minimum qualifications: Interest in robotics and manufacturing. Detail-oriented and methodical in collecting and recording data. Strong communication skills, both verbal and written. Consistent, reliable, and comfortable working in a fast-paced environment. Able to stand for extended periods and lift up to 40 pounds as part of daily operations. WHO WE ARE: We spend our days building robotic systems, developing complex assembly intelligence software, and designing the next generation of circular products for our customers. Things to know: We're a small, collaborative team with big ambitions, and there's a good amount of context-switching. We expect people to be autonomous and drive their own work to completion. We are a profitable business that is primarily funded from customer revenue, which means we are scrappy and looking to build a great sustainable company for years to come. As a growing company and startup, priorities may shift as customer or business requirements change. We strive to empower individuals with context and decision-making power to meet this need.

Are you ready to bring your Machine Operator skills to a team that values precision and innovation? At Martin Sprocket & Gear, we're dedicated to producing quality mechanical power transmission components, material handling systems, and custom forgings with excellence, and we're looking for skilled Machine Operators like you! What You'll Do: Follow production instructions: Follow production instructions and tasks from process sheets, blueprints, or verbal directions provided by the supervisor to achieve desired outcomes in the manufacturing process. Install machine fixtures: Align and secure dies, punches, blades, or other fixtures to ensure the machine operates safely. Operate machinery: Set up and operate machines such as lathes, mills, drills, presses, and CNC machines according to specifications. Inspect operations: Monitor the production process to ensure the machines function correctly and product meet quality standards. Perform inspections and measurements of finished products to verify they meet specified tolerances and quality standards, using tools like calipers, micrometers, and gauges. Adhere to cleanliness and safety protocols: Follow safety protocols and guidelines to maintain a safe working environment, including wearing personal protective equipment (PPE) and adhering to safety regulations. Use a crane or buddy system to maneuver large, awkward, or heavy parts. Ensure that the work area is clean and organized. Perform other duties: Assist in other areas or departments as needed. What You'll Bring: Math skills: Requires average math skills, with the ability to read and comprehend instructions written in English and complete simple logs and reports in English. Physical capability: Must be physically able to handle heavy items, including lifting, pushing, pulling, and positioning components. Policy/procedure compliance: Must be able to work scheduled hours and comply with the company's timekeeping policy and all other company policies. Stamina: Must be able to consistently stand for an entire shift in a non-climate-controlled shop environment. Machining knowledge: Ability to learn fundamental machining concepts and demonstrate proficiency in using measuring devices. Collaboration: Work closely with other team members, including supervisors, to optimize production processes and implement improvements. Accuracy: Attention to detail is essential for maintaining quality standards. Reliability: Demonstrates a strong commitment to dependability and consistent performance. Adaptable precision: Detail-oriented with the flexibility to respond effectively to shifting production demands. Your Schedule: Monday - Friday, 6:00 AM - 2:30 PM. To perform this job successfully, you must be able to report daily to the branch to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified candidates with disabilities to perform the essential functions. Why Martin Sprocket & Gear, Inc.? Founded in 1951 by Joe Martin Sr., Martin Sprocket & Gear is a global leader in mechanical power transmission components, material handling systems, and custom forgings. We are proud to remain family-owned and operate on a simple philosophy: "Make a quality product, have plenty of it available, and be easy to do business with!" With dedicated employees, regional facilities, and strong distributor partnerships, Martin offers stability, growth potential, and a dynamic work environment for all team members. Why You Will Love Working Here: At Martin, our people are our greatest asset. We foster an inclusive, collaborative environment where innovation and growth thrive, and your contributions are valued as part of a team dedicated to excellence. Here is what you'll enjoy when you join our team: Comprehensive Health Benefits: Affordable Medical, Pharmacy, and Dental plans. Wellness Initiatives: Employee wellness programs for a healthy work-life balance. Financial Security: Life and Disability Insurance, plus a robust 401(k) Profit Trust Plan. Work-Life Balance: Paid Time Off (PTO) and company-paid holidays. Growth Opportunities: Career development and advancement within a thriving company. Ready to Join Us? Apply today and become part of Martin Sprocket & Gear's legacy of quality and excellence! Disclaimers The above statements describe the general nature and level of work being performed by candidates applying for this specific role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of candidates hired. Martin Sprocket & Gear is an EEO Employer and an E-Verify participating employer. We do not discriminate based on race, religion, national origin, sex, sexual orientation, gender identity, age, physical or mental disability, marital status, or veteran status.

· Requires the ability to read drawings and follow instructions, use precision measuring tools and to set up and operate engine (manual) lathes. Reports directly to supervisor, Machine Shop, or his/her designate. Job Tasks: · Performs turning, facing, boring, threading, reaming, and other standard lathe operations. · Selects and adjusts, feeds, speeds, and tooling. · Maintains quality standards to tolerances as required involving these of scale, micrometer, calipers, dial indicator, plug gauge, and other measuring devices. · May be required to grind high speed and carbide cutting tools. · Work may require the use of hand or power operated material handling equipment. · Will be required to supply several personal tools such as scale, square, tape, hammer, wrench, dial calipers, etc. · Observes safe work procedures and maintains good housekeeping standards. · Performs other duties as assigned by supervisor and his/her designate. Requirements Education and Experience Required: · High school diploma or GED and BOCES required. · Must pass proficiency test. Working Conditions: · May be required to move items up to 60 pounds for distances of up to 10 feet. May be required to stand, stoop, bend, kneel and squat for extended periods of time. Considerable amount of work done above floor level. May be exposed to fumes or dust, toxic or caustic chemicals, outdoor weather, moving mechanical parts and moderate to loud noise levels. Must wear appropriate gear and clothing as necessary.

Since 1942 H-V Industries has continued to lead the way with development of highly innovative products that have shaped the industry. Today our highly skilled workforce, supported by a complete compliment of machinery, equipment and processes, continues to support a multitude of industries and customers around the world. It is this innovative spirit and the drive to explore new markets that keeps us at the forefront of the latest technical advances and continues to drive us forward. H-V Industries is a part of Crown Cork and Seal USA, Inc., a world leader in the Packaging Industry, but H-V also serves many other customers in a wide variety of industries. H-V provides a competitive wage and comprehensive benefits package that includes COMPANY PAID: medical/dental/vision/life/disability pay insurances, vacation, holidays, and educational assistance. Other benefits include a 401(k) with company match. Duties/Responsibilities of this position include: CNC Machinist capable of running both Lathes and Mills Candidate should be proficient in operating various machine/control configurations and have experience in the manufacture of tool and die parts. Works with minimal supervision Setup tooling and specified cutters as required Perform simple programming changes and edits to maximize productivity, and read and interpret Engineering drawings Perform frequent checks of parts to ensure dimensional requirements are met Summary of essential job functions: Setup of machine including parts and tooling Make modifications to programs where needed Verify first part qualification Perform preventative maintenance to equipment including daily, weekly and monthly maintenance and checks CarnaudMetalbox Engineering (CMB Engineering) designs, develops, and manufactures high-performance metal forming and finishing machinery for the production of beverage, food and aerosol cans. Furthermore, with our commitment to innovation and precision engineering, we continually strive to break the mold. With CMB Engineering, can manufacturers are able to keep up with consumer demands; as well as capitalize on market opportunities, while ensuring production efficiency. CROWN Cork & Seal, USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers, and consumers alike. With operations in 39 countries employing approximately 23,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring the best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated, and driven individuals. Minimum requirements: Minimum of 3-5 years experience operating both Mills and Lathes, great training opportunity for the mechanically inclined. *Actual salary will be determined based on skill and experience level* Abilities required: Lifting and carrying of parts and or fixtures weighing from 2-100 lbs frequently Operate machine controls positioned 4-5 feet from shop floor Able to perform at work benches set at 36-40 height Standing and walking continuously for 8 hours per workday Forward bending required while loading and unloading machine and operating controls Move carts containing parts weighing up to 200 lbs. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Job Description AIM Heat Exchangers, a family-owned manufacturer of custom shell and tube heat exchangers seeks a full-time Machinist/Lathe Operator to work 1st shift. Job Summary: Set up and operate a variety of equipment to machine parts according to specifications. Perform a variety of operations in the machine shop. Essential Duties: Set up and operate machines such as lathes, drills, saws, and mills Primary duty will be lathe operator Read blueprints to determine product specifications and material needed Perform all job functions to meet acceptable quality and performance standards Marking machined parts with heat numbers for material traceability Communicate with co-workers and supervisors to receive instructions and coordinate activities Follow all safety procedures Drive a forklift to transport material Operate overhead crane Perform minor machine repair such as oiling or cleaning machines Other duties as assigned Skills: Knowledge of machines and tools including drilling, tapping and layout Ability to use measuring devices such as calipers Strong math skills including ability to convert decimals to fractions Able to read and understand blueprints Experience in working with different types of materials Hold tight tolerances Documentation with attention to details and accuracy Ability to operate CNC machines a plus The ideal candidate will be a team player with the desire to learn and increase their value to the company over time. Must be willing to perform a variety of functions. Experience: 3-5 years of machining experience Some personal tools may be required Certifications: Forklift operation Overhead crane operation NYS driver's license Education: High School Diploma or equivalent and minimum 3 years experience

PEKO Precision Products: WE MAKE PRODUCTS THAT MATTER PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: CNC Machinist (A & B Shift) Your Role: The CNC Machinist is responsible for the set-up and operation of a variety of CNC machines. You will set up, operate, and manufacture products according to blueprint specifications and customer requirements. Reports To: Machining Supervisor What We're Looking For: Previous experience with the setup and operation of CNC Mills or Lathes Ability to read blueprints Knowledge of Geometric Dimensioning and Tolerances (GD&T) Ability to conduct a final inspection of a product to ensure that it is free from defects and ready for the next stage of production. Qualifications: Required High school diploma or GED equivalent 3 plus years experience in a machine shop environment 3 plus years of experience working with vertical mill machines Preferred Associates in precision machining Experience with multi-axis CNC milling with fanuc controls, MAZAK, or similar. Experience in horizontal mill machines Work Authorization: US Persons PEKO Perks: Competitive Total Rewards Tuition Reimbursement (IRS Allowable pre-tax Max) 401K, Medical, Dental, Vision Flexible Spending & Health Savings Accounts Life, Short and Long-Term Disability Recognition Awards & Discretionary Benefits Our Core Values: We care about our talented and loyal PEKO family. We are committed to providing a safe, clean, and positive workplace. We believe in transparency, honesty, and respect for all stakeholders. We are dedicated to maintaining an agile and financially prudent organization. We foster the belief that PEKO people are resilient problem-solvers impacting the future. Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $17.00-$32.00 per hour with a 10% shift differential. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training.

Company: Acco Department: Manufacturing Title: CNC Lathe Operator - YORK, PA Reports to: Machine Shop Supervisor Level/Grade: Union Type of Position: Full Time FLSA Status: Non-Exempt Shift: First Company / Product Acco Material Handling Solutions (“Acco”) specializes in the manufacturing of material handling equipment, including hoists, cranes, carts and lifters. Its products are used primarily in industrial manufacturing and distribution environments, including aerospace, water treatment, heavy manufacturing, agriculture, mining, automotive, and logistics. Operating from three manufacturing facilities in the US, Acco provides ready to ship stock products or fully engineered custom devices. Products are sold through distributors, as well as to large direct customers. Job Summary CNC Lathe Operator will setup, machine, and measure parts to close tolerance to support wire rope hoist and component manufacturing. Principal Duties and Responsibilities Work with supervisor on setting daily work flow/priorities Read and interpret drawings Setup, machine, and measure to specification Maintain highest quality standards - accept no defects, make no defects, pass no defects Communicate any challenges related to Safety, Quality, Delivery, Inventory, and Productivity (SQDIP) to supervisor Maintain a clean and organized work space Innovate and collaborate with peers in your work area - find ways to improve SQDIP Volunteer for overtime as needed Pay / Location Starting rate - $21.00 per hour with progression to $23.00 per hour. Pending experience level determines starting hourly rate. Location - 76 Acco Dr York, PA Job Specifications (Work Experience, Skills, Abilities, etc.) Ability to read and interpret machining drawings Experience in CNC Lathe machine setup and operation Manual and NC machine experience a plus Experience with and ability to use calipers, micrometers and other precision measuring tools Coordinate Measuring Machine (CMM) experience a plus High sense of urgency and strong work ethic Demonstrated ability and passion for high quality output Works well both independently and in a team environment Education Requirements: High school diploma or equivalent, technical/vocational school a plus Physical Demands/Environmental Conditions: Typical manufacturing conditions. Must be able to lift 35 - 50 lbs. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. #Acco

At Check-Mate Industries, Inc., a leader in precision manufacturing, we're shaping the future of industries like aerospace, automotive, firearms, cosmetics, and medical. Our Thomasville, GA and West Babylon, NY facilities are a hub of innovation, where your skills as a CNC Machinist Programmer will help deliver high-quality solutions to global customers. With over 50 years of excellence, we're known for out-thinking, out-maneuvering, and out-performing the competition. Join a collaborative team that values your expertise, fosters growth, and prioritizes safety and inclusion. Why Join Us? Career Advancement: Access training, certifications (e.g., NIMS), and pathways to leadership or specialized roles. Innovative Environment: Work with cutting-edge CNC technology and industry-standard software like Mastercam. Impactful Work: Craft precision parts for critical applications, from life-saving medical devices to law enforcement tools. Comprehensive Benefits: Enjoy competitive health plans, paid time off, and retirement options (details provided during hiring). Inclusive Culture: Thrive in a diverse, supportive workplace where every voice matters. What You'll Do As a CNC Machinist Programmer, you'll program and operate advanced CNC machines to create high-precision metal and plastic parts. Your attention to detail and technical expertise will ensure top-quality products for our diverse clients. Key responsibilities include: Program CNC Machines: Use Mastercam or similar software to create programs, offsets, and calculations for precise part fabrication. Set Up & Operate Equipment: Configure vertical and horizontal CNC milling centers and other machines, selecting tools, fixtures, and materials based on blueprints or CAD designs. Quality Control: Inspect finished parts with tools like micrometers, calipers, and gauges to ensure blueprint accuracy. Assembly & Testing: Assemble parts into complete units and test functionality using jigs, fixtures, and precision instruments. Maintenance & Troubleshooting: Perform routine machine maintenance, diagnose issues, and schedule repairs to maintain efficiency. Collaboration: Work with engineers, programmers, and inventory managers to optimize processes and resolve challenges. Inventory Management: Track raw materials, report low stock, and support cost-effective ordering. What We're Looking For We welcome candidates from diverse backgrounds, whether you're an experienced machinist, a programmer with CAD expertise, or transitioning from a related field. If you're detail-oriented, safety-focused, and eager to grow, we want you on our team! Required Qualifications: High School Diploma or GED from an accredited institution. 1-5 years of experience with CNC machines and programming (entry-level candidates with relevant training encouraged to apply). Proficiency with Mastercam or similar CNC programming software. Experience using measuring tools (e.g., calipers, micrometers, height/depth gauges). Strong hand-eye coordination and attention to detail. Preferred Qualifications: 3-5 years of machining experience in a manufacturing environment. Familiarity with shop floor control software (e.g.,PLEX, IQMS MES, TrakSYS, E2 Shop System, MasterCam). Experience with CAD software (e.g., AutoCAD, SketchUp, SolidWorks). Certifications such as National Institute for Metalworking Skills (NIMS). Work Environment & Physical Demands Work in a fast-paced industrial setting with moderate to loud noise (hearing protection provided). Stand, sit, or walk for extended periods; occasionally lift up to 50 pounds or reach overhead. Requires close vision, color vision, and ability to read small print or computer screens. Reasonable accommodations available for individuals with disabilities. Why This Role? Skill Growth: Master advanced CNC programming and work with state-of-the-art tools. Variety & Impact: Contribute to diverse projects with real-world significance across multiple industries. Team Synergy: Join a collaborative team where your problem-solving skills drive success. How to Apply Ready to make precision parts that make a difference? Submit your resume and a brief cover letter highlighting your skills and passion for manufacturing. Visit our careers page or contact HR Department for more information. Check-Mate Industries is an equal opportunity employer committed to fostering a diverse and inclusive workplace for all employees.

Job Description CNC Machinist ???? Work Hours: 3:00 PM to 1:30 AM, Monday through Thursday ???? Competitive Compensation + 12.5% Shift Premium Make the Right Connection-Build Your Career with Dixon! Bearon Manufacturing, an affiliate of The Dixon Group is seeking a skilled CNC Machinist to join our dedicated team in Landisville, PA! In this hands-on role, you'll be responsible for setting up, operating, and maintaining CNC machinery to produce high-quality parts to exact specifications. If you have a strong mechanical background, shop training in machining and metal properties, and enjoy taking ownership of your work, this is a great opportunity to advance your career in a supportive and innovative environment. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. ???? What You'll Do: Set up, operate, and fine-tune CNC machines to manufacture precision components (metal + plastic) Run multi-axis programs for milling, drilling, threading, reaming, and profiling Interpret blueprints and work instructions with accuracy and attention to detail Perform part inspections using precision measurement tools (micrometers, calipers, gauges) Collaborate with other machinists and engineers to improve processes and efficiency Maintain a clean, safe work environment with a focus on quality and consistency ???? What We're Looking For: High School Diploma or equivalent required 5+ years of CNC machining and setup experience Solid background in metal manufacturing Comfortable reading blueprints and using calipers, micrometers, and other QC tools Good with shop math and basic CNC programming edits Reliable, team-oriented, and always looking to improve Able to lift 50 lbs and stand for extended periods of time ???? What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.) Please contact us at ************** or ***************** if you need help to participate fully in the application process.

Job Description Summary/Objective: The Shift CNC Swiss Machinist operates machines to fabricate finished parts to specifications while holding tolerances up to +/- .0001. The Machinist loads parts in the machine, cycle's machine, and detects malfunctions in machine operations, such as worn or damaged cutting tools. The position communicates with co-workers regarding productions runs, and maintains a safe, organized, and clean work environment. Benefits: Health insurance Dental insurance Vision insurance Life insurance Paid time off 401(k) 401(k) matching Employee assistance program Key Responsibilities: Uphold the company values, vision, and mission and quality policy. Follow company policies and procedures. CNC Programming: Create and modify CNC programs based on engineering drawings and models. Machine Setup: Set up and prepare CNC machines, ensuring proper alignment, tooling installation, and workpiece fixation. Quality Control: Perform in-process inspections and use precision measuring instruments to verify the quality of machined components. Troubleshooting: Identify and troubleshoot machining issues, making necessary adjustments to ensure optimal machine performance and part quality. Safety and Maintenance: Adhere to safety protocols and perform routine machine maintenance to ensure equipment remains in peak operating condition. Process Optimization: Continuously improve machining processes to enhance productivity, reduce cycle times, and minimize scrap. Other duties as assigned. Education: Minimum of 5 years of experience as a CNC Machinist Precision Machining: Demonstrated expertise in machining complex parts with tight tolerance. Problem-Solving: Excellent troubleshooting skills to identify and resolve machining issues effectively. Attention to Detail: Meticulous approach to qualify control and adherence to precise specifications. Communication: Effective verbal and written communication skills to collaborate with team members and provide clear updates on machining projects. Skills Required: Comprehension of complex engineering drawings. Ability to hold tolerances up to +/- .0001 . Blueprint, GD&T, measuring equipment Basic Communication Basic shop math Work Environment: Manufacturing floor environments Controlled temperature environments Expected Hours of Work This is a Full-Time hourly position required to work Monday through Friday, with occasional weekends. Travel: Up to 0%

About Us: Oberg Industries is a leading precision manufacturer with over 77 years of proven excellence serving high-performance industries like aerospace, defense, medical, tool and die, and automotive. Our team specializes in solving complex machining challenges using the latest advanced CNC and 5-axis technologies. As a team member at Oberg, you will work on unique, high-precision components for the space exploration, medical device sectors, defense, and other dynamic industries where quality and craftsmanship truly matter. If you're an experienced CNC machinist who takes pride in your work and thrives in an environment that values precision, independence, and innovation- we want to talk to you!! Why You'll Love Working With Us: * Above Market Wages * Work with state-of-the-art 5-axis CNC machines, multi-axis lathes, EDM machines, and automated machining centers (Hermle, DMG, Okuma, Sodick) * Be part of process development and improvements * Steady, year-round work * Health, dental & vision insurance * 401(k) with company match * PTO + paid holidays * Quarterly bonus and year end profit sharing * Career growth in a forward-thinking manufacturing environment What You'll Do: * Set-up and operate CNC state of the art equipment (CNC mills, lathes, EDM, grinders) * Develop the industry's toughest components for the Space, Aerospace, and Medical markets. * Perform first piece and in-process inspection using hand tools and feedback from coordinate measuring machines. * Collaborate with an experienced, tight-knit team to launch new products into production. * Solve real-time shop floor challenges What We're Looking For: * 5+ years of CNC machining experience on 4 or 5-axis machines. * Proficient in developing new processes with tight tolerance and complex geometries. * Comfortable working with heavy GD&T and working independently. Apply Today: If you've got the skills and the passion - we've got the opportunity. Join a company where your work is seen, valued, and celebrated. At Oberg Industries, LLC we are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, genetics, pregnancy, disability, age, veteran status, or other protected characteristics. No question on this application form is intended to solicit information about an applicant's protected characteristics, if any. In addition, the Americans with Disabilities Act requires employers to provide reasonable accommodations for known physical or mental disabilities of applicants.