Numerical control operator jobs in Yuma, AZ - 1,933 jobs

CNC Mill Set-Up Machinist: Precision Manufacturing Employment Type: Full-Time (Various Shifts Available) Are you an experienced Machinist who takes pride in producing high-quality components? We have an immediate opening for a CNC Mill Set-Up Machinist to join our Tucson team. Our company is dedicated to being the manufacturer of choice, focusing on continuous improvement, on-time delivery, and, most importantly, supporting our team of employees. The Role: Excellence in Production As a Set-Up Machinist, you will be responsible for the initial configuration and quality control of our milling operations, ensuring every part meets our rigorous standards. Precision Machining: Produce and inspect quality parts according to specific drawings and work instructions. Quality Assurance: Use and understand various measuring and inspection tools to verify part accuracy. Operational Safety: Maintain a clean, organized work area and strictly adhere to all equipment safety standards. Team Collaboration: Work effectively as part of a team to meet production targets and customer expectations. What You Bring to the Team Experience: Proven experience in CNC Mill set-up. Horizontal experience is a significant plus. Technical Literacy: Strong ability to read and interpret technical drawings and work instructions. Communication: Must be able to read and write in English. Physical Capability: Capable of lifting up to 50 lbs and performing active tasks, including standing, reaching, pushing, and pulling throughout the shift. Requirements: * High School Diploma or GED. Why Join Us? Immediate Openings: We are looking to grow our team right away. Shift Flexibility: With various shifts available, we can help find a schedule that works for you. Culture of Improvement: Join a company that values "continuous improvement" and invests in the tools and processes needed to succeed. Ready to bring your machining expertise to a top-tier manufacturing team? Apply today!

HVAC Mechanic (OC2-A/C Operator) Schedule: Monday-Friday, 7:00 AM - 3:30 PM Contract Duration: 1 Year Position Type: Full-Time (2 FTE openings) Pay: $37.83 - $45.00 per hour About the Role: Allmed Staffing Inc. is seeking two (2) full-time HVAC Mechanics (OC2-A/C Operators) to support operations at the Department of Veterans Affairs facility in Palo Alto, CA. This is a government contract position within a healthcare setting, offering competitive pay and the opportunity to contribute to essential infrastructure that directly supports veterans' care. Key Responsibilities: Perform repair, maintenance, modification, and preventive service on HVAC systems, plants, and related equipment. Install and ensure proper operation of critical climate control units, ensuring balanced air flow and temperature readouts. Troubleshoot and overhaul a variety of refrigeration units including freezers, food carts, chillers, and solar-integrated systems. Conduct system inspections including pressure, temperature, and run-time diagnostics. Collaborate with other trades for installation of large-scale or roof-mounted units; perform independent work as needed. Qualifications: Minimum of 4 years of journeyman-level experience in industrial/commercial HVAC systems. Strong technical skills in diagnostics, preventive maintenance, and system overhauls. Ability to work independently and read blueprints and technical manuals. Must be able to lift and install heavy equipment, including ceiling and rooftop units. To Apply: Please email the following to Kevin@allmedstaffinginc.com: A current resume/CV demonstrating a minimum of 4 years of relevant HVAC experience. Must include chiller experience. A copy of your REAL ID, Military ID, or Passport is required. Join us in supporting those who served. We are proud to contribute to the care and comfort of our v

Work schedule: 1st shift QUALIFICATIONS 3+ years of experience in setting up, operating, and programming CNC Machines SolidCam, SolidWorks, or MasterCam is preferred Job Description The CNC Machinist is responsible for programming, setting up, and operating CNC equipment - including Haas mills, lathes, and CNC Swiss-type machines - to produce precision components according to engineering drawings and specifications. This is a hands-on programming and machining role, requiring the ability to take parts from print to finished product. PRIMARY DUTIES AND RESPONSIBILITIES Independently program, set up, and operate Haas CNC mills, lathes, and CNC Swiss-type lathes. Use SolidWorks and SolidCAM to create CNC programs, toolpaths, and machining strategies. Input, edit, and optimize G-code/M-code directly at the terminal or machine as needed. Select and install tooling, fixtures, and work holding devices. Perform first article inspections and verify part dimensions using precision measuring tools (calipers, micrometers, gauges, CMM if applicable). Troubleshoot and resolve machining issues related to tooling, speeds/feeds, and part quality. Perform routine maintenance on machines and keep work area clean and organized. Collaborate with engineers and quality inspectors to improve processes and resolve issues. Maintain accurate documentation of setups, programs, and production runs. Follow safety protocols and shop procedures. EDUCATION AND TRAINING High School diploma or equivalent (technical/vocational training preferred). Must be able to independently program CNC mills, lathes, and Swiss-type machines Proficiency in SolidWorks and SolidCAM for part modeling and CNC programming. Strong knowledge of CNC programming fundamentals, toolpath strategies, and machine controls (Haas preferred). Ability to read and interpret engineering drawings, GD&T, and machining symbols. Skilled in the use of precision measuring instruments. Strong troubleshooting skills, problem-solving ability, and mechanical aptitude. EXPERIENCE 3-5 years of CNC machining experience in an AS9100 or ISO9001 environment. Proficiency in SolidWorks CAD software. PHYSICAL REQUIREMENTS Must be independently mobile while performing job duties. Regularly required to interact with a computer and communicate with peers and co-workers. Ability to lift and/or move up to 50 pounds and stand for extended periods. May require overtime or shift flexibility depending on production demand. Comply with U.S. regulations; this position requires candidates to be a U.S. Person or Protected Individual per 8 U.S.C. 1324b(a)(3).

About the Company Growing manufacturer in the San Diego, CA metro area has an excellent opportunity available for a Lead Senior CNC Programmer / Machinist. About the Role The position will be involved in programming mills using Mastercam 2023 or similar software. Experience in lathe programming would also be a plus. The position will be involved in training other machinists. Responsibilities This is an 8 hour day shift position. Supervising and mentoring other machinists in the setup, adjustment, and operations of CNC Mills and Lathes to produce precision metal parts. Setup tools, create jaws and fixtures as needed, and load parts. Perform part dimensions inspection and verify conformance to specifications. Help with quoting of new parts. Qualifications Must have at least 10 years of experience on CNC mills. High school diploma or equivalent required. Pass a drug screen/background check. Must be able to lift 50 lbs. Required Skills Knowledge of machining nickel alloy materials is preferred. Comprehensive machine shop experience and knowledge of machine shop machinery and practices. Experience with on-machine probing is preferred. Must be able to read and understand drawings, GD&T, setup sheets, and work instructions. Experience with Mastercam 2023 or newer programming preferred. Knowledge of G and M codes and editing ability preferred. Team player with the ability to work together to complete jobs. Able to work in an organized way with good housekeeping skills. Experience in plastic injection molding, mold making, extrusion or the plastics industry would be a plus. Preferred Skills Experience in lathe programming. Pay range and compensation package The position offers a very competitive hourly rate, bonus potential and comprehensive benefits.

Duration: 1-Year Contract (Possible 1-Year Extension) CNC Programmer / Machinist (Multi-Axis) | Motorsports & Racing Engines Build precision parts that win races. We're hiring an experienced CNC Programmer / Machinist to manufacture high-performance racing engine components in a fast-paced motorsports environment. This role is ideal for someone who thrives on complex multi-axis machining, tight tolerances, and owning the full process from programming to finished part. What You'll Do: Program multi-axis CNC mills using MasterCam Create and optimize advanced tool paths for close-tolerance engine components Design and develop fixtures, tooling, and work-holding Set up, operate, and optimize CNC machines Troubleshoot machining issues and improve processes Collaborate with engineering and production teams under real race-driven deadlines What We're Looking For: 2-year CNC technical degree + 5 years experience, or 10+ years hands-on CNC programming 7+ years CAD/CAM programming experience (tooling, fixtures, manufacturing processes) Strong background in precision machining and machine setup Experience with: MasterCam (multi-axis) Fanuc controllers (preferred) CATIA V5 AMG Organized, detail-driven, and comfortable managing multiple projects Proficient with Excel, Word, and PowerPoint Why This Role: Work on racing engine components, not production widgets High ownership and technical autonomy Solve real machining challenges that impact performance and reliability Join a team where precision, speed, and results matter

In order to be considered for this role, after clicking "Apply Now" above and being redirected, you must fully complete the application process on the follow-up screen. JOB TITLE: OPERATIONS STAFF REPORTS TO : OPERATIONS MANAGER DEPARTMENT: OPERATIONS FSLA: HOURLY, PART-TIME SALARY: $17.40 PER HOUR Job Description POSITION SUMMARY Under general supervision, will perform work as needed to clean, maintain and prepare for events at the facility. Duties include skilled and semi-skilled tasks, often requiring heavy lifting and a high degree of physical exertion. Must be the age of 18 or older and out of High School. ESSENTIAL DUTIES Assist with set-up/conversions and event preparations. Perform various duties to ensure the operations of the facility are met. These include but are not limited to loading/unloading delivery trucks and transporting trash and waste to proper disposal area. Perform repairs and maintenance as directed. Maintain, clean and inventory all tools and equipment. Work extended and/or irregular hours including nights, weekends, and holidays as needed. Set up and change over arena configuration as needed for event needs. All other duties and responsibilities as assigned. WORKING CONDITIONS Physical requirements include the ability to communicate verbally and to be able to move around the building. Subject to adverse weather and working conditions, including fumes, noise and other hazardous situations. Position requires walking, climbing, kneeling, and heavy lifting. SKILLS REQUIRED Follow oral and written instructions and communicate effectively with others in both oral and written form. Work independently, exercising judgment and initiative. Organize and prioritize work to meet deadlines. Work effectively under pressure and/or stringent schedule and produce accurate results. Maintain an effective working relationship with clients, employees, exhibitors, patrons and others encountered in the course of employment. Follow direction including all policies/procedures, risk management, safety precautions, rules/regulations and emergency procedures established at the facility. Remain flexible and adjust to situations as they occur. Demonstrate knowledge of practices and procedures related to event-set-up and conversions; typical methods and techniques for cleaning; maintaining the facility; and proper use and care of hand and power tools. Meet the physical demands of the job. Must perform strenuous physical duties at times, including lifting, carrying, moving and climbing. EDUCATION AND/OR EXPERIENCE: High School diploma or GED, and one year experience or any equivalent combination of education and experience. TO APPLY: To visit our Career Site at: (This recruitment will close when positions are filled). External Candidates: ASM Global is an Equal Opportunity/Affirmative Action employer, and encourages Women, Minorities, Individuals with Disabilities, and protected Veterans to apply. VEVRAA Federal Contractor.

Vacuum Process Engineering, Inc., known as VPE, is an exciting special-process manufacturing company for defense, semiconductor, energy markets that is growing. VPE technologies have applications in defense, medical, semiconductor, energy, and commercial aviation. There is never a dull day at VPE; we've been in business for 45 years and have 5 buildings with over 200,000 sq. ft. of manufacturing space. We offer competitive pay and a comprehensive benefits package. We are seeking an additional team member for our process engineering and innovation staff; a dedicated individual with good work ethics that is seeking a long-term career with a stable company. Pay Range: $27-33/hour Summary/Objectives: The goal of the Machine Operator will be to increase workflow in the shop by being able to setup, operate, and troubleshoot jobs independently. The candidate will be capable of checking their own work, handle in processing inspections, and perform their own hard checks. The ability to do this independently will increase efficiency and workflow through the entire Machine Shop. Essential Duties and Responsibilities: Operate and setup CNC lathes and/or Mills. Produce and maintain all part characteristics according to specifications with tolerances as low as .001". Visually inspect tools for excessive wear. Select and install tooling as required by the documentation. Inspect parts for acceptance using proper inspection procedures Maintain the machines. Adhere to all safety procedures and company policies. Assist shop production by helping co-workers. Maintain work area housekeeping and assist in department/team housekeeping efforts. Supervisory Responsibilities: No supervisory responsibilities Education and/or Experience: Associate's degree (A. A.) or equivalent from two-year college or technical school plus a minimum of 4 years of working experience in manufacturing or engineering technicians; or a minimum of 6 years of related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and understand component technical manuals. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Computer Skills: To perform this job successfully, an individual should have knowledge of Internet software; Manufacturing software; Spreadsheet software and Word Processing software. Certificates, Licenses, Registrations: Current Driver's License Other Skills and Abilities: Be able to program Hass equipment Experience with Mitsubishi and Sodick EDM's a plus Other Qualifications: Bachelor of Science in engineering is a plus ISO 9001/AS 9100 QMS system Lean manufacturing system, Root cause analyses, Process control methodology Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand. The employee is occasionally required to walk; sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision and ability to adjust focus. essential functions.

On-site: Full-time We are seeking a skilled CNC Mill Machinist with mid-level experience to set up, operate, and maintain CNC vertical and horizontal milling machines (including Makino and Nakamura models) in a high-precision manufacturing environment. This role emphasizes accurate setups, tool changes, real-time adjustments, and quality inspections to produce tight-tolerance metal components. The position requires strong mechanical aptitude and the ability to work independently while maintaining safety and quality standards. No advanced programming is required - focus is on proven programs with basic offset adjustments and minor G-code edits at the control (Fanuc or similar) as needed. Key Responsibilities Set up and operate CNC vertical/horizontal mills (e.g., Makino high-speed/precision models, Nakamura multi-tasking milling centers) to machine parts to blueprint specifications Select, align, and secure workholding fixtures, cutting tools, and materials (precision vises, soft jaws, 4th-axis rotaries, collets, modular fixtures) Calculate and set speeds, feeds, depth of cut, and coolant flow; make real-time adjustments for tool wear, material variations, or minor process issues Perform tool changes and set tool length/work offsets using manual touch-off, touch probes, or presetters Read and interpret complex blueprints, including GD&T callouts, and follow detailed work instructions Conduct first-piece, in-process, and final inspections using precision tools (micrometers, calipers, bore gauges, indicators, height gauges) Troubleshoot common machining issues (e.g., chatter, tolerance drift, tool deflection) and implement corrective actions Perform daily preventive maintenance: clean machines, check coolant/lubrication levels, replace worn tools/inserts Document inspection results, adjustments, and nonconformances per quality procedures Maintain a safe, clean, and organized work area (5S standards) Qualifications 1-5+ years of hands-on CNC mill machining experience (vertical and/or horizontal machines) Proven ability to perform independent setups and changeovers on 3-axis (or higher) CNC mills Strong proficiency with precision measuring instruments (micrometers, calipers, bore gauges, indicators) Solid blueprint reading skills, including GD&T interpretation Comfortable making offset adjustments and basic G-code edits at the control (Fanuc, Haas, or similar) Mechanical aptitude and problem-solving skills for troubleshooting machining issues Experience holding tight tolerances (±0.001 " or better) in production environments Familiarity with safety practices (LOTO, PPE, machine guarding) Reliable attendance and commitment to quality and continuous improvement High school diploma or equivalent required Preferred Experience with Makino high-speed/precision mills or Nakamura multi-tasking CNC mills/lathes Familiarity with Fanuc controls Basic understanding of speeds/feeds calculations Forklift certification Exposure to ISO 9001, AS9100, or similar quality systems Previous work in aerospace, defense, medical, or precision manufacturing

The Cybersecurity Operations Project Manager will drive the clients' cybersecurity operations, working with the client Director. This role will lead and support ongoing cybersecurity operations activities, fixes, incident management and projects. In this role you will represent the cybersecurity operations team and work with leaders, IT Teams, vendors and other cross-functional teams to facilitate the monitoring and vulnerability management. Primary responsibility is working with Leaders, IT Teams, vendors and other cross functional team to drive cybersecurity operations work Assist with vendor / product evaluations Acts as a project facilitator to cross functional peers, subordinates, and senior management regarding cybersecurity operations issues, resolutions and enhancements Lead implementation planning, drive and monitor execution, and manage risks and issues of cybersecurity initiatives and operational activities Provide accurate status reporting of progress and risks of initiatives and activities to all relevant stakeholders Communicate effectively at global organization level for cybersecurity related messaging Leverage cybersecurity understanding to drive the conversations with stakeholders and ensure all aspects are covered Collaborate with cross functional teams to deliver on the cybersecurity initiatives In addition to being strong project manager, successful candidates need to have strong analysis and documentation skills to create and maintain security operations and process documentation. Drive vulnerability remediation actions assigned to relevant IT teams Facilitate infrastructure monitoring and Incident Management Response to any cybersecurity incidents Perform analytics and reporting of cybersecurity trends and metrics Prepare Monthly Key Performance Metrics (KPM's)- using Jira, PhishER and other tools to gather and publish metrics to Confluence site Collect and analyze periodic compliance statistics Participate in relevant scrums, sprints to collaborate to deliver the fixes Skills and Qualifications:Overall 8+ years of IT experience, with a majority in project leadership / project management roles, and 5+ years of relevant Cybersecurity or IT infrastructure experience Experience in managing cybersecurity activities and fixes Strong infrastructure background and experience working with vendors to facilitate identifications of vulnerabilities Working knowledge of cybersecurity operations Experience facilitating fixes with relevant teams Ability to understand and articulate "What is at Stake” from cyber security perspective to the relevant teams Understanding of infrastructure and cybersecurity technologies and standards Proficiency in both oral and written communications (including executive level presentations) A bachelor's degree Additional Requirements:Open minded and takes ownership of actions and responsibilities Self-starter with the capability to respond positively to constructive correction and guidance Innovative and enjoys learning and trying new things Comfortable in a dynamic and fast-moving environment The salary range provided for this contract role represents our good faith estimate for this position. Within the range, individual offers will vary based on the selected candidate's experience, industry knowledge, technical and communication skills, location and other factors that may prove relevant during the interview process (W2 or C2C). In addition to compensation, the company provides eligible W2 employees with a comprehensive and highly competitive benefits package. I.T. Solutions, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Company Information Headquartered in St. Augustine, FL, with offices and manufacturing facilities all around the globe, Amphenol CIT is one of the world's leading designers and manufacturers of high-performance wire, cable, and medical devices. We provide complete interconnect solutions to industries like Aerospace, Military & Defense Electronics, Space, Medical, Test & Measurement, and Industrial. Our talented team of employees worldwide helps bring movies to your seat on airplanes, deliver mission-critical information from drones to the command office, transfer heart rhythm to paper, route communications from space, connect power to downhill oil drills, and get planes back in the air faster. At Amphenol CIT, we make the amazing possible. Take the next step to become an integral part of our team by applying today and kickstart your journey with us. Summary Receives direction from the Maintenance Supervisor. The primary responsibilities include setting up and operating tooling and fixtures for the Model Shop, and completing all assigned tasks in accordance with the Router and Blueprint. Must adhere to all Machine Shop processes, including but not limited to Work Instructions (WI), Manufacturing Instructions (MI), and Operating Procedures (OP). All tasks are to be performed accurately, promptly, and independently, without the need for further instruction. Essential Job Functions Receive, review, and interpret Work Orders and tooling requirements for set-up. Work under the guidance of a Machinist III. Fabricate tooling, fixtures, jigs, and models to support manufacturing operations. Operate conventional equipment such as lathes, Bridgeport-type horizontal mills, surface grinders, band saws, pedestal grinders, and related support equipment. Maintain a clean and organized work area. Read and interpret blueprints, including understanding geometric tolerances. Complete all required documentation, including Work Orders. Troubleshoot and evaluate machining issues, and clearly communicate any discrepancies. Use all necessary inspection equipment relevant to the task. Support the Quality System by ensuring compliance with the company's Quality Manual, procedures, and policies. *Other duties as required in support of the department and the company* Supervisor Responsibilities Non-Supervisory Role The responsibilities of this role do not include supervising other employees. Qualifications To perform this job successfully, the individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION And EXPERIENCE Minimum of one year of experience as a machinist using conventional equipment High school diploma or equivalent Strong understanding of shop math, including geometry and trigonometry, as well as blueprint reading Effective oral and written communication skills Excellent hand dexterity, coordination, and precision Ability to communicate and collaborate effectively with individuals at all levels Strong attention to detail Language Requirements Excellent verbal and written communication skills in English. Conversational in any other language is a plus. PHYSICAL DEMANDS The physical requirements outlined below indicate those necessary to fulfill this position's core responsibilities. While performing job duties, the employee will regularly engage in activities such as using hands to finger, handle, or feel and communicating verbally. Additionally, the employee will frequently need to reach with hands and arms while standing and walking as part of the role. Occasional lifting and movement of objects weighing up to fifty (50) pounds and using a ladder may be required. This position also demands specific vision capabilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Reasonable accommodation will be provided according to ADA regulations to enable individuals with disabilities to perform the job's essential functions. WORK ENVIRONMENT Manufacturing environment: A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Amphenol CDI is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have. Personal Protective Equipment Requirements ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas. Clear ANSI Z87.1 safety-rated glasses in specific areas. Hearing protection in specific locations. Ability to compile with JSA in specific areas. EXPORT COMPLIANCE DISCLAIMER This position includes access or potential access to ITAR and EAR (Export Administration Regulations) technical data. Therefore, candidates must qualify as US Persons, defined as US Citizens or Permanent Residents (Green Card Holders). TRAVEL Approximately 0-10% of travel is expected. Salary Information According to several states' laws, this position's salary range falls between $21.00 and $25.00 hourly. However, this salary information is merely a general guideline. When extending an offer, AmphenolCDI considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations. AMPHENOL CIT RESERVES THE RIGHT TO MODIFY, INTERPRET, OR APPLY THIS IN ANY WAY THE COMPANY DESIRES. THIS IN NO WAY IMPLIES THAT THESE ARE THE ONLY DUTIES, INCLUDING ESSENTIAL DUTIES, TO BE PERFORMED BY THE EMPLOYEE OCCUPYING THIS POSITION. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT, IMPLIED OR OTHERWISE. THE EMPLOYMENT RELATIONSHIP REMAINS "AT-WILL." THE AFOREMENTIONED JOB REQUIREMENTS ARE SUBJECT TO CHANGE TO REASONABLY ACCOMMODATE QUALIFIED DISABLED INDIVIDUALS. Amphenol CIT is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. For more information regarding EEOC requirements please visit **************************************************************** *********************************************************************************************** Due to the nature of our business, the candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20). Amphenol CIT participates in the United States Department of Homeland Security E-Verify program. The E-Verify program is a web-based employment eligibility verification system for newly hired employees operated by the U.S. Citizenship and Immigration Services. Any candidate that needs an accommodation or assistance with the application process should contact HR at ********************************

Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is headquartered in San Jose, CA. This is a contract-to-hire position with the goal of transitioning to full-time employment. As a Humanoid Robot Operator, you'll have the unique opportunity to work directly with our humanoid robots and teach them new behaviors and skills. You will be at the forefront of our operations, deploying the robots for real commercial use cases, identifying issues, and relaying these problems to the right engineering teams. SHIFTS - 1:45 PM - 10:00 PM Responsibilities: Be responsible for the humanoid robot operating successfully for the Customer use case Run the robot constantly throughout the day/midevening, identifying bugs and problems Track, document, and escalate issues to the appropriate engineering teams using Jira. May wear teleoperation equipment and guide the robot through designated behaviors. Ensure work areas meet organizational cleanliness and organization standards. Adhere to all safety procedures related to robot operation and teleoperation equipment. Follow proper equipment and robot maintenance procedures, including bring-up and shutdown. Requirements: Willingness to own the operations of the humanoid and drive proper functioning of the robot Excellent communication skills. Demonstrate sustained focus and attention while performing assigned tasks. Experience working with robots or troubleshooting mechanical systems. Can stand 8+ hours a day and physically manage humanoid hardware Embrace constructive feedback and strive for constant improvement. Thrive in a fast paced environment. 5 day workweek with a mandatory weekend shift and 2 days off Bonus Qualifications: A passion for helping scale the deployment of learning humanoid robots. Excellent physical coordination, spatial awareness, and focus. Master new physical tasks quickly and find the optimal way to perform them. There will be a 2-3 week training process at company headquarters. Training takes place Monday through Friday from 7:30 AM-4:00 PM. The US base salary range for this full-time position is between $25 - $35/hr . The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.

Are you ready to go from job to life-changing, long-term, stable career? Quality Metal Spinning & Machining, or QMS, has been the premier pioneer in metal spinning in Silicon Valley for over fifty years. Our dedication to quality is unrivaled. With decades of experience and expertise, we enjoy not only the achievement of solid industry longevity, but also of maintaining and fostering long-term employee retention. Many of our employees have been with us for over 25 years! Job Description •Responsible for completing first-time and repeat job set-ups on lathes • Manage daily tool and work offsets • Use inspection tools including calipers, height gauge, micrometer, etc. • Manage a repeatable process from blueprints, with little supervision • Use blueprint, schematics, written and verbal instructions, shop policies and normal quality standards to obtain required contours, dimensions, and finish specifications • Ability to write programs using CAD/CAM and Esprit experience a plus, but not required; Ability to edit programs highly preferred • Ensure that proper protocols on how equipment is started, maintained, used, cleaned, and turned off is required • Calibrate and modify operational sequences to adjust speed of machining and frequency of cuts • Troubleshoot common machine issues • Perform other duties as assigned Requirements • Minimum 1-5 years experience • Maintain a clean and safe work environment • Be a team player and willing to help others, as needed • Reliable and dependable What we offer • Competitive compensation • Generous benefits • Welcoming and friendly work environment • $25 - $35 per hour

Physical Intelligence is building the future where AI-powered robots seamlessly integrate into our daily lives. Imagine a robot that can fold your laundry, prepare meals, and organize your space. Picture robots in warehouses that can handle any package, or manufacturing robots that can adapt to new products without reprogramming. We're making this vision reality by developing general-purpose AI that can control robots to perform any physical task. Our team of engineers, scientists, and roboticists is creating foundation models-the same breakthrough technology behind ChatGPT-but for the physical world. Just as language models learned to understand and generate text from massive datasets, our robots learn to interact with the physical world through high-quality demonstration data. The Role: Powering the AI Revolution Data collection is the fuel that drives our mission. Every robot movement, every successful task completion, every demonstration you provide teaches our AI systems how to interact with the physical world. As a Robot Operator, you're not just controlling robots-you're literally training the AI that will power the next generation of intelligent machines. You'll be at the forefront of robotics AI, working hands-on with cutting-edge robotic systems to generate the high-quality training data our models need. Your precise demonstrations teach our AI everything from delicate manipulation tasks to complex multi-step processes. This is your chance to directly contribute to technology that will transform how robots help humans in homes, workplaces, and beyond. What You'll Do Primary Responsibilities Teleoperate robotic arms through a variety of tasks using our intuitive control systems Either lead robot movements with your arms (the robot mirrors your actions) or guide robots using specialized controllers Complete diverse tasks ranging from household activities like folding laundry to complex assembly work Maintain high standards for data quality and consistency across all demonstrations Meet established metrics for data collection volume and quality during your shift Important Note: This is a metrics-based role where you'll be expected to meet specific data collection goals throughout your shift. The work involves repetitive task execution, and the quality of data collection is extremely important to our AI training success.You can watch some examples of this here: **************************************************************************** Example Tasks You'll Train Robots On Picking up grocery items and placing them in shipping bags Sorting cups, plates, and utensils into bins Opening and closing jars of various sizes Folding different types of clothing and fabrics Installing light bulbs and other simple assembly tasks Multi-step electronics assembly processes Additional Duties Review and annotate videos of robot task performances using computer interfaces Provide detailed feedback on robot performance and data quality Assist with equipment setup and basic office tasks as needed Participate in process improvements to enhance data collection efficiency Physical Requirements Ability to stand at a workstation for 8-hour shifts Full use of both arms and hands for robot control Good hand-eye coordination and manual dexterity Attention to detail for quality control Work Environment & Schedule Shift Options (8 hours with 30-minute lunch + two paid breaks): Currently looking for those interested in a Thursday to Sunday schedule and overnight coverage. Morning: 7:00 AM - 3:30 PM PT Evening: 3:30 PM - 12:00 AM PT Overnight: 12:00 AM - 7:00 AM PT Commitment: Minimum 4 days per week, with preference for 5-day availability Compensation: $25/hour + benefits package What We're Looking For Ideal Background Experience with hands-on technical work, lab environments, or precision tasks Interest in AI, robotics, and cutting-edge technology Strong attention to detail and quality focus Key Qualities Meticulous attention to detail-data quality is crucial for AI training Good manual dexterity and hand-eye coordination Enjoys repetitive, precision-focused work Thrives in fast-paced, metrics-driven environments Excited about contributing to breakthrough AI research Collaborative mindset and strong work ethic Nice to Have Experience with robotics systems or automation Background in manufacturing, assembly, or laboratory work Familiarity with AI/ML concepts Gaming or simulation experience with controllers Why This Role Matters You'll be part of the team building the foundation for general-purpose robotics AI. Every demonstration you provide directly impacts our ability to create robots that can help with household chores, assist in workplaces, and improve quality of life. This is a rare opportunity to work at the cutting edge of AI and robotics while developing valuable technical skills in a rapidly growing field. Ready to help train the robots of tomorrow? We'd love to connect with you!

Set up and be able to operate all machines within the machine shop Set up and operate lathes and mills Set up and operate economy pointer Set up and operate slotters Set up and operate air chamber Set up and operate fillet roll Set up and operate traubs Set up and operate dye machine Set up and operate drill press Set up and operate auto pin machine Set up and operate button die and c-sink Set up and operate cut off saw Set up and operate chop off press Be familiar with and able to use dial calipers, mic and SPC computer Qualifications-Education/Experience Required: Qualifications-To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required for this position Education and/or Experience-High school diploma or general education degree (GED), or five years related experience and/or training, or equivalent combination of education and applicable experience Language Skills-Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability tow rite routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization Mathematical Skills-Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Be able to read and interpret blue prints. Reasoning Ability- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Preferred: Travel Requirements 0%

Set up and be able to operate all machines within the machine shop Set up and operate lathes and mills Set up and operate economy pointer Set up and operate slotters Set up and operate air chamber Set up and operate fillet roll Set up and operate traubs Set up and operate dye machine Set up and operate drill press Set up and operate auto pin machine Set up and operate button die and c-sink Set up and operate cut off saw Set up and operate chop off press Be familiar with and able to use dial calipers, mic and SPC computer Qualifications-Education/Experience Required: Qualifications-To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required for this position Education and/or Experience-High school diploma or general education degree (GED), or five years related experience and/or training, or equivalent combination of education and applicable experience Language Skills-Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability tow rite routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization Mathematical Skills-Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Be able to read and interpret blue prints. Reasoning Ability- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Preferred: Travel Requirements 0%

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity. Shift 1: 6:00am - 2:30pm Compensation: $22.00/hour to $24.00/hour (depending on experience) Responsibilities Operate and monitor assigned machinery and equipment according to established procedures and safety standards. Perform routine maintenance and cleaning of machines to ensure optimal performance. Read and interpret blueprints, work orders, or production schedules to determine job instructions. Inspect parts and finished products for quality and accuracy using measuring tools. Record production data, including output, downtime, and defects. Adjust machine settings as necessary to maintain product specifications and minimize waste. Collaborate with team members and supervisors to meet daily production goals. Report any mechanical issues or safety concerns to maintenance or supervisory staff. Follow all company policies, safety procedures, and quality control standards. Skills / Qualifications High school diploma or GED is a plus; vocational or technical training preferred. Previous experience in a manufacturing or production environment is a plus. Experience operating or working with mills (manual or CNC) or other metalworking machinery is highly desirable. Familiarity with machining processes such as cutting, drilling, or grinding. Mechanical aptitude and the ability to troubleshoot minor equipment issues. Basic math and measurement skills. Ability to read and interpret technical documents, blueprints, or schematics. Strong attention to detail and commitment to quality. Ability to work independently and as part of a team in a fast-paced environment. Willingness to work flexible hours or shifts as needed. Work Environment: Regular standing, bending, reaching, and lifting up to 50 lbs. Use of hands and manual dexterity for precise machining and tool work. Exposure to loud noises, coolant, sharp tools, and metal shavings. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming “the world's most trusted testing partner”. All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity. Shift 1: 6:00am - 2:30pm Compensation: $22.00/hour to $24.00/hour (depending on experience) Responsibilities * Operate and monitor assigned machinery and equipment according to established procedures and safety standards. * Perform routine maintenance and cleaning of machines to ensure optimal performance. * Read and interpret blueprints, work orders, or production schedules to determine job instructions. * Inspect parts and finished products for quality and accuracy using measuring tools. * Record production data, including output, downtime, and defects. * Adjust machine settings as necessary to maintain product specifications and minimize waste. * Collaborate with team members and supervisors to meet daily production goals. * Report any mechanical issues or safety concerns to maintenance or supervisory staff. * Follow all company policies, safety procedures, and quality control standards. Skills / Qualifications * High school diploma or GED is a plus; vocational or technical training preferred. * Previous experience in a manufacturing or production environment is a plus. * Experience operating or working with mills (manual or CNC) or other metalworking machinery is highly desirable. * Familiarity with machining processes such as cutting, drilling, or grinding. * Mechanical aptitude and the ability to troubleshoot minor equipment issues. * Basic math and measurement skills. * Ability to read and interpret technical documents, blueprints, or schematics. * Strong attention to detail and commitment to quality. * Ability to work independently and as part of a team in a fast-paced environment. * Willingness to work flexible hours or shifts as needed. Work Environment: * Regular standing, bending, reaching, and lifting up to 50 lbs. * Use of hands and manual dexterity for precise machining and tool work. * Exposure to loud noises, coolant, sharp tools, and metal shavings. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

Job DescriptionDescription: Purpose of Function: This role primarily operates CNC lathes, running parts according to engineering drawings and responsible for certification. but you'll also receive cross-training to support other manufacturing areas. If you like learning new skills, staying busy, and contributing wherever the team needs you, this is a great fit. Main Tasks/Responsibilities/Authorities: Main Tasks: Review production orders to verify correct specifications Set up lathe and operate per specifications Maintain all logs Responsibilities: Maintain a clean and safe work environment Alert Manager of any repair needs of other areas of concern with regard to the facility Troubleshoot and repair manufacturing equipment Assist in manufacturing processes as directed Assist in engineering processes as directed Perform a variety of tasks to support the day-to-day operations of the business, including cross-functional support Requirements: Function Requirements: (education, experience, competences, etc) The Lathe technician should have a high school degree or equivalent. Prior experience in a manufacturing technician role, following work instructions and using a lathe is required.

About Us Advanced Structural Technologies (AST) is a leading manufacturer specializing in forged, flow-formed, and machined products for the aerospace, defense, and automotive industries. With over 25 years of experience, AST has built a strong reputation for precision engineering, innovation, and high-quality manufacturing. Located in Oxnard, California, AST operates out of cutting-edge facilities spanning over 250,000 sq. ft., including our newest expansion completed in 2024. AST employs approximately 185 skilled professionals across multi-shift operations, ensuring efficiency, precision, and timely delivery for mission-critical industries. Position Overview We are looking for an experienced CNC Mill Machinist to set up and operate CNC milling machines in a fast-paced production environment. This position is responsible for executing precise milling operations, editing programs, setting tooling, and inspecting complex parts with tight tolerances. The ideal candidate is self-sufficient, mechanically inclined, and focused on maintaining consistent quality and productivity. Key Responsibilities • Set up and run CNC mills based on job specifications • Read and interpret blueprints, layouts, and setup documentation to determine part requirements • Select appropriate tooling, set tool offsets, and verify part dimensions using precision measuring instruments • Make minor edits to CNC programs to ensure optimal machining results • Inspect first-run and in-process parts to confirm dimensional accuracy and compliance • Troubleshoot machining issues and implement corrective actions as needed • Maintain a clean and safe work environment in accordance with company policies • Assist with developing and refining milling processes and setup sheets for repeat jobs • Communicate with engineers, supervisors, and other team members to meet production goals Qualifications • 5+ years of experience operating and setting up CNC milling machines • Ability to read G-code and make minor program edits • Strong understanding of milling principles, fixtures, and tooling • Ability to read complex engineering drawings and interpret tolerances • Experience in a job shop or high-mix production environment is preferred • Strong inspection skills using calipers, micrometers, and other measuring tools • Must be able to lift up to 45 lbs and work on your feet for long periods • High school diploma or equivalent required; additional machining coursework is a plus Why Join AST? At AST, we believe in fostering a work environment where employees can thrive both personally and professionally. We offer a competitive benefits package, including: Medical, Dental, and Vision Insurance 401(k) Savings Plan Company-Sponsored Life Insurance Short-term and Long-term Disability Coverage Paid Holidays Paid Vacation and Sick Leave Job Type & Pay Job Type: Full-Time, In-Person Pay Range: $25 - $45 per hour (commensurate with experience) Hours & Schedule Schedule: Monday - Friday (8-hour shift) Expected Hours: 40+ hours per week (plus flexibility as needed) If you are a highly skilled machinist with a passion for precision, we encourage you to apply. AST is committed to maintaining a fair and respectful workplace for all employees.