Production operator jobs in Colesville, MD

Entry Level & Highly Skilled Pharmaceutical Production/Manufacturing Operators The Manufacturing/Production Operator reports to the Production Manager and performs functions relating to the processing of drug products, ensuring product compliance to established current Good Manufacturing Practices (cGMPs), customer requirements and in conjunction with all Standard Operating Procedures (SOPs). Key Accountabilities: Operates pharmaceutical production machinery and follows the procedures for manufacturing such as weighing, blending, dispensing, mixing, pellet coating, granulating, drying, milling, blending, compressing, Encapsulating, Coating, potent compound, etc. Meets the requirements for use of manufacturing equipment and other commonly used equipment per SOPs. Executes written SOPs to ensure the purity of materials involved in the manufacturing process. Properly uses all scales, including printouts, zeroing, setting tares, and daily calibration verification per SOPs. Examines manufacturer Product ID Labels, Quality Control release tags, and Batch Production Record to verify issued/staged raw materials can be released for production. Cleans manufacturing equipment and facilities according to established SOPs. Executes machine changeovers from batch to batch. May sample batches for quality testing. Executes required in-process product quality checks and documents accurately. Understands and runs processes to meet the assigned schedule and standards/routers; when this is not achieved, participates in the debrief to understand the reasons why and what needs to be corrected moving forward. Required Skills & Abilities: Proficient in running machinery. Proficient in (Master Clean/Surface clean) equipment cleaning. Proficient in sampling batches. Proficient in doing basic set-ups. Ability to participate in Continuous Improvement projects. Qualified in any of the following manufacturing processes: Weighing Blending Granulation Compression Coating Encapsulation Potent Compound Experience & Education High School Diploma or equivalent experience Any production or retail store experience Knowledge of Good Manufacturing Practices (cGMP) Looking for Pharmaceutical Glatt, Compression and Pan coating experience Level II Operator: High School diploma, GED or College Associate Degree Minimum of 2-5 years of pharmaceutical manufacturing experience and certification in assigned area, as required or proficiency demonstrated in competencies as required. Forklift certification may be required for certain jobs. Level III Operator:HS Diploma, GED or College Associate Degree Minimum of 5+ years of pharmaceutical manufacturing experience and certification in assigned area, as required or proficiency demonstrated in competencies as required. Forklift certification may be required for certain jobs. Knowledge: Current Good Manufacturing Practices (cGMP) Food and Drug Administration (FDA) and other regulatory requirements Standard Operating Procedures for process rooms and manufacturing area GMP compliance in a regulated work environment Manufacturing processes and equipment procedures Physical Requirements: Must be able to stand for long periods of time (up to 12 hour shifts), maneuver at least 50 pounds, climb ladders, wear a respirator and pass associated respirator tests and/or requirements, and be able to wear all required PPE, including safety glasses, ear plugs, and safety shoes.

Pay Rate: $23-28/hr (W2) Schedule: 4 × 10s Shift: 3rd Shift - Sunday to Wednesday, 10:00 PM - 8:30 AM Role Purpose The Manufacturing Associate I is responsible for supporting the manufacture of therapeutic proteins (API) under cGMP conditions. This role focuses on executing established manufacturing processes, following SOPs, monitoring equipment, and performing basic laboratory and facility support tasks. Associates will develop a foundational understanding of cGMP compliance while working under close supervision and demonstrating proper aseptic techniques. Key Responsibilities Manufacturing Operations (40%) Set up, operate, and monitor manufacturing equipment and production processes Perform Clean-in-Place (CIP) and Steam-in-Place (SIP) operations Accurately document production activities in written and electronic systems in compliance with GMP and GDP requirements Review documentation as required Training & Qualification (20%) Attain qualification for all assigned tasks Maintain individual training plans and compliance records Laboratory Support (10%) Perform basic laboratory testing including pH, conductivity, and sample testing Material Handling (10%) Perform material movements and transfer raw materials and chemicals within production areas Facility & Equipment Maintenance (10%) Conduct routine cleaning and sanitization of equipment and facility areas Support 6S and continuous improvement initiatives Administrative & Team Support (10%) Participate in shift handoffs, meetings, and project activities Perform administrative tasks including email communication and documentation Complete other duties as assigned Qualifications Education High School Diploma or equivalent (required) Associate's or Bachelor's degree preferred Preferred field of study: Science-related discipline Experience 0-3 years of experience Prior manufacturing experience preferred (biotech, pharmaceutical, or regulated environment a plus) Skills & Competencies Basic understanding or willingness to learn cGMP principles Strong attention to detail and documentation accuracy Proven logical reasoning, critical thinking, and decision-making skills Ability to follow written procedures and work effectively in a team environment

BioTalent is seeking to hire a Manufacturing Associate interested in getting into the biotech/pharmaceutical industry. Previous experience in industry is not required but preferred. Role Purpose: The Manufacturing Associate is responsible for the manufacture of therapeutic proteins (API) under cGMP conditions. Level I associates are expected to execute process recipes, follow written procedures (SOPs), monitor equipment and processes, perform basic laboratory tasks, including pH, conductivity, sampling, and conduct routine sanitization tasks to maintain facility and equipment. They are expected to attain a basic understanding of cGMP compliance while training under close supervision, demonstrating aseptic technique in handling of products and materials. Duties/Responsibilities: 40% Set up, operate equipment, and monitor production processes, including clean-in-place (CIP) and steam-in-place (SIP) operations and report production in written and electronic documents in accordance with good manufacturing practice (GMPs) and good documentation procedures (GDPs), review documentation as appropriate 20% Attain qualification for all assigned tasks and maintain individual training plan 10% Perform basic laboratory tasks, such as monitor pH, conductivity, test product samples, etc. 10% Perform material movements, transfer raw materials, chemicals into, out of, across the production areas. 10% Maintain facility and equipment through routine cleaning and sanitization, support 6S programs 10% Administrative tasks - attending shift exchange, meetings, sending/receiving emails, participating in projects, perform other duties as assigned. Qualifications: High School Diploma or Equivalent minimum; AS/BS preferred Preferred area of study: Science related discipline 0-3 years' experience; some prior experience in a manufacturing setting preferred. Proven logic and decision making abilities, critical thinking skills Ability to work 3rd shift: 4 x 10 schedule Sunday - Wednesday, 10PM - 8:30AM

The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the “Best Value” supplier in the industry. Essential Duties and Responsibilities: Operate a wide range of machinery to fabricate, process, and assemble chain and other operations associated to ensure that all processes are maintained and run to the high levels of efficiency and quality stipulated by US Tsubaki standards. Primarily responsible for the operation of a complete range of: grinders, drilling machines, ballizers, semi-automatic equipment, power presses, and packaging equipment, or other operations associated with the fabrication, processing, or assembly of pins, bushings, rolls, side plates, attachments, and all other chain related components. No set-up skills are required. Able to measure all quality parameters of assembled and unassembled chain components and determine corrective action where appropriate to the processes concerned. Retrieve and replace components from parts storage or prior processes to ensure continuous operation of equipment. Requirements: Must have the ability to learn to operate simple production equipment with minimal amount of instruction. Basic numeric and writing skills are essential. High level of dexterity and flexible nature essential. Requires sufficient knowledge of all types of production equipment for example: grinders, drilling machines, ballizers, automatic equipment, semi-automatic equipment, power presses, greasing, and packaging equipment, and tooling required, to maintain close tolerances and work specifications. Self-motivated to take ownership of work schedule and quality. Continuous improvement: Willing to accept change to support being a Fast - Flexible - Efficient section. Must be a team player - capable of working with peers and supervisors both inside and outside the section in order to satisfy the needs of internal and external customers. Make decisions in order to perform a variety of tasks having timely constraints. Follow directions / instructions of group leader or supervisor. Able to work in any fabrication, processing, assembly, and warehouse section when and where needed. Capable of handling heavy weights. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 Compensation details: 20.54-23.65 Hourly Wage PIacbe56fd933d-30***********2

Immediate need for a talented Cell Therapy Manufacturing Specialist (GMP | CAR-T). This is a 06 months contract opportunity with long-term potential and is located in Frederick, Maryland (Onsite). Please review the job description below and contact me ASAP if you are interested. Job Diva ID: 25-94404 Pay Range: $30 - $33 /hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Responsibilities: Location: Remote (25% travel to Foster City, CA) Duration: Contract / Full-Time (Specify) Day Shift: 6:00 AM-4:30 PM (Sun-Wed or Wed-Sat) Swing Shift: 3:00 PM-1:30 AM (Sun-Wed or Wed-Sat) Complete all required New Hire Orientation + Technical Manufacturing Training (first 6-8 weeks, Mon-Fri, 07:30-16:00) Perform and/or verify all GMP manufacturing steps according to batch records and SOPs Routinely operate, clean, prepare, and monitor automated cell processing, cell expansion, and filling systems within Grade B/C cleanrooms After training, transition into a 4/10 shift as assigned: Troubleshoot equipment and process issues; communicate promptly to leadership Author, revise, and follow GMP-compliant SOPs to support safe and efficient operations Support investigations, deviations, change controls, and CAPA activities Maintain aseptic technique, full gowning/PPE compliance, and contamination-control readiness. Identify opportunities to improve manufacturing efficiency, safety, and compliance. Wear a respirator when required during cleaning procedures involving select chemicals. Key Requirements and Technology Experience: Key skills; Cell Therapy, Cell Manufacturing, cGMP, Quality Validation Experience. cGMP manufacturing experience in biologics, cell therapy, or pharmaceutical operations Aseptic technique & ability to perform sterile gowning for Grade B/C cleanrooms Experience operating or supporting automated cell processing, cell expansion, or filling equipment Strong GMP documentation discipline (batch records, SOPs, deviations, change controls) Ability to troubleshoot process and equipment issues and escalate appropriately Ability to stand for extended periods and wear full PPE/respirator when required Strong adherence to compliance, safety, and contamination-control standards Our client is a leading Healthcare Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. By applying to our jobs, you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

BASIC FUNCTION Support production of packaged goods according to Standard Operating Procedures and specified quality standards. Carries out specific instructions from Production Manager/Supervisor in accordance with the daily packaging schedule. TEAMWORK RESPONSIBILITIES Must be familiar with standard concepts, practices, and procedures within field. Relies on instructions, pre-established guidelines, experience and judgment to perform the functions of the job and accomplish goals. Performs a variety of tasks autonomously and with proficiency, Works under general supervision. ESSENTIAL RESPONSIBILITIES AND PRINCIPAL ACCOUNTABILITIES Denotes "essential functions" in accordance with the guidelines of The Americans with Disabilities Act. The essential functions of this position include, but are not necessarily limited to, those specifically identified in this description. The position and its essential functions may change over time and these changes may not necessarily be reflected in the position description. The Company may, at its sole discretion, add to, change, or expand the essential or marginal functions of the position. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability generally required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • EDUCATION/EXPERIENCE: High school diploma or general education degree, (GED); or one to three months of related experience and/or training; or equivalent combination of education and experience. • MATH ABILITY: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. • REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts, fumes or airborne particles and vibrations. The employee may occasionally be exposed to a risk of electrical shock, extreme heat (non-weather), and toxic or caustic chemicals. The noise level in the work environment is usually loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must regularly lift and /or move up to 40 pounds, infrequently move up to 1000 pounds. While performing the duties of this Job, the employee is regularly required to stand, use hands to finger, handle, or feel and reach with hands and arms, climb or balance. The employee is occasionally required to stoop, kneel, crouch or crawl.

Is attention to detail among your key strengths? Do you like getting things right and seeing a task through to completion? Can you see yourself playing an important role on a team dedicated to producing world-class quality electronic products? Our production team is a close-knit group of professionals who are upbeat, talented and extremely proud of their work and the cutting edge products they produce. We use state of the art Surface Mount Technology (SMT) & Inspection equipment to assemble our own high quality printed circuit cards. We are searching for an organized, detail-oriented, and friendly SMT Operator to join our production team and take pride in sending products to Test with minimal defects. Join us and become part of the future of computing technology! Essential Duties and Responsibilities Operate SMT equipment to place components according to IPC A 610 Class III standards and inspect using AOI machine Operate Screen printer to print solder on PCB and inspect using SPI machine Operate Convection Oven Inspect printing and component placement Hand place components before sending boards through the oven Maintain all documentation necessary as required by the process Perform necessary maintenance on SMT equipment Operate x-ray equipment, dispensing equipment, and PCB Cleaner Apply masking material in preparation for other processes Operate rework equipment Occasionally some overtime or working on the weekends may be required Requirements High School Diploma or equivalent U.S. Citizenship Hands on experience with assembling PCB's Hands on experience with a Pick and Place machine Ability to lift 20 lbs Attention to Detail Strong Oral and Written Communication Ability to effectively work in a team environment Able to adapt to change Desired Technical Background Bachelor's degree Experience in handling SMT components, boards, and tools for assembly Experience with Solder Printer to Oven and all additional equipment in between Experience following manufacturing documentation and procedures. Experience following quality standard and inspection requirements to IPC 610 A Class III. Able to read and understand engineering bill of materials and drawings

Starting Pay: $22/hr and $2 shift differential Schedule: 2,2,3 Schedule Working Hours: 6 PM-6 AM As an Extruder Operator in our Vinyl Extrusion division, you'll be at the heart of our manufacturing process-ensuring quality, safety, and performance every step of the way. Join the team at Milgard Windows and Doors, a proud part of MITER Brands, where precision, innovation, and craftsmanship come together to create industry-leading vinyl window and door solutions. Responsibilities: Operate 1-3 PVC profile extrusion lines to meet production and quality standards Safely disassemble, clean, reassemble, and change over extrusion tooling sets using overhead crane tools Perform visual inspections and take precise measurements using calipers to ensure product quality Maintain a clean and organized work area-spray down equipment, sweep floors, and remove clutter Complete reports on productivity, machine conditions, and finished goods using bundle tickets and work orders Assist with packaging and forklift operations as needed Qualifications: Associate's degree or equivalent from a technical school or 6-12 months of related experience Forklift certification Strong oral communication and interpersonal skills Ability to read and interpret safety rules, operating manuals, and procedure documents Basic math skills (fractions, decimals, percentages, and bar graphs) Problem-solving ability and comfort with detailed instructions Tolerance for high-paced environments and multi-tasking scenarios What We Offer Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. - Three comprehensive Medical plan options Prescription Dental Vision - Company Paid Life Insurance - Voluntary Life Insurance - Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance - Company-paid Short-Term Disability - Company-paid Long-Term Disability - Paid time off (PTO) and paid Holidays - 401k retirement plan with company match - Employee Assistance Program - Teladoc - Legal Insurance - Identity Theft Protection - Pet Insurance - Team Member Discount Program - Tuition Reimbursement - Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

The Machine Learning Engineer II will be a member of the Learning and Active Perception (LEAP) group in AV's MacCready Works division and support the development of a variety of innovative computer vision capabilities (object detection, classification, localization, and tracking) and other image/video analytics for defense and commercial applications. These development efforts require a range of skills and tools across traditional engineering, computer science, and mathematical disciplines including but not limited to data management, computer vision, machine learning, optimization, and deep convolutional neural networks. This position will span multiple stages of the development process including requirements gathering, algorithm design, prototyping, test and evaluation, and validation and verification testing. This specific role also involves on-site support for experimentation and fielded systems requiring a significant amount of extended travel, both domestic and international. Duties * Support development of computer vision and machine learning (ML) algorithms capable of object detection, classifying, localizing, and tracking objects of interest from a variety of stationary and mobile sensor platforms with the primary purpose of real-time automated target recognition (ATR) * Perform visual imagery data science to inform data collection, data labeling, and data selection for training deep computer vision ML algorithms, train the algorithms using the data, and validate data selection and algorithm design through a series of purpose-designed experiments. This includes: o Analyze ML algorithms to solve a given problem and rank them by their success probability on new data o Set objectives and develop models that help achieve them, along with metrics to track their progress o Select appropriate datasets and data representations o Analyze errors of the data, model, and design strategies to overcome them * Write and test software to support the integration of machine learning algorithms into aircraft (such as autopilots, payloads, or other functional components) or other systems * Other duties as assigned Experience * 2 - 5 years of relevant computer vision experience * Familiarity with Python and C/C++ required * Proficiency with a deep learning framework, preferably PyTorch * Proficiency with basic libraries for machine learning such as, Open-CV, scikit-learn, and pandas * Familiarity with Linux * Familiarity with Nvidia Tools (CUDA, JetPack, TensorRT) and deployment process to Nvidia GPUs * Demonstrated ability to troubleshoot complex systems and perform algorithmic optimization * Ability to perform exploratory data analysis, including visualizing and manipulating large datasets Education BS in any of the following fields: Computer Science/Engineering, Mathematics, Physics, or related Science or Engineering discipline with 2+ years of relevant experience in machine learning and/or computer vision. Additional Requirements * Must be a team player and collaborate effectively * Excellent verbal and written skills * Has effective problem-solving, analytical and interpersonal skills * Ability to work within defined requirements to complete tasks under moderate supervision * Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties * Displays strong initiative and drive to accomplish goals and meet company objectives * Takes ownership and responsibility for current and past work products, and demonstrates a willingness to share the results with other team members and provide feedback and input to teammates working similar problems. * Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company * Familiarity with office software and computer-based productivity tools Physical Demands * Ability to work in office and field environments (Constant) * Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer keyboard (Frequent) Special Requirements * U.S. Citizenship required * Active Secret level (or higher) DoD security clearance * Willingness and ability to travel CONUS and OCONUS (Frequent / 50%+) including extended stays up to 60 days Clearance Level No Clearance The salary range for this role is: $102,708 - $145,530 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship is required. Secret or Top Secret clearance, or the ability obtain a clearance is desired.

This position will oversee production lines and staff to ensure timely and efficient work flow, while meeting finished product specifications. In this role, will also partner with Quality Assurance to ensure quality standards are met, and will track labor and raw product yields. Accountabilities: Communicate with Production staff and management team to ensure proper follow through on duties. Perform product inventory cycle counts as directed. Maintain accurate documentation for food safety purposes. Advise management of unsafe conditions and provide recommendations for improvement. Communicate well (both written and verbal) with management, as well as direct employees in a productive/professional manner. Assist with scheduling of work teams, and initiate short and long-term plans with Production Management. Assist with training of employees and ensure they are provided ongoing skills development and coaching, to improve job performance. Assess daily and weekly output, identify issues in productivity, and manage the allocation of people and equipment, to address day-to-day variations in demand and capacity, across assigned lines. Perform tasks as related to position of production employee when needed. Flexible-Willing to move around within department or to different shifts. Any other accountability will be discussed at the time of the interview. Will be required to stay later if needed. Minimum Skills Required: High School Diploma or equivalent, from an accredited institution. Knowledge of Microsoft Office programs (i.e. Word, Excel, and Outlook, etc.). At least 1 year prior experience in a similar role in a production environment. Strong analytical and organizational skills. Must be able to communicate well (both written and verbal) with management as well as direct employees in a productive/professional manner. Must be able to work in a production area which includes noise, equipment moving, sharp utensils, wet, and cold ( Strong attention to detail and problem solving abilities. Preferred: Hazard Analysis & Critical Control Points (HACCP) experience. Fork Lift and/or Electric pallet jack experience. Bi-lingual: English and Spanish Food Experience (Fresh Fruit) ***Please note: This position does not qualify for relocation expenses. *** Fresh Del Monte Produce Inc. is a global leader in the production, distribution, and marketing of fresh and fresh-cut fruits and vegetables. Our diverse product portfolio also includes prepared fruits and vegetables, juices, beverages, snacks, and desserts-available in over 80 countries worldwide. With operations spanning more than 35 countries, we've proudly been nourishing families for over 135 years. We are committed to maintaining a drug-free workplace and are proud to be an Equal Opportunity Employer. Fresh Del Monte and its affiliates do not discriminate based on race, color, religion, national origin, age, disability, gender, veteran status, or any other characteristic protected by applicable law. We also participate in E-Verify* where applicable, to ensure employment authorization eligibility. Driven by our core values-Excellence, Care, Passion, Trust, and Creativity-we invite you to explore our career opportunities and join our FRESH team.

About the Job The IV Production Technician prepares all medication for compounding performs IV preparation under sterile technique and packages medication for distribution for ordering entity according to policy and procedure manual. Primary Duties and Responsibilities * Accurately compounds and completes mixing of TPN in the appropriate timeframe as set forth by the productivity standards. * Accurately prepares all medication according to the mixing report prepared by the pharmacist utilizing good compounding technique. Labels patient specific medications for inspection by pharmacist. Records lot numbers and expiration dates on mixing reports for all dispenses. * Completes set up of TPN compounder according to policy and procedure for inspection by pharmacists. * Contributes to the achievement of established department goals and objectives and adheres to department policies procedures quality standards and safety standards. Complies with governmental and accreditation regulations. * Maintains daily production logs as outlined in the Policy and Procedure manual. Consistently signs off processes that will validate medications produced. * Maintains department facilities equipment and materials through cleaning and signs off processes that will validate accurate operation. * Participates in the on-call rotation and rotates to the prep area room as requested. * Participates in the ongoing review maintenance and revision of the CIVAC policy and procedures. * Performs other duties as assigned. * Receives all bins into the clean room for compounding and prioritizes mixing of medications. * Records data in Simplifi-797 including but not limited to temperature monitoring (incubator refrigerators and freezers) cleaning activities. Minimal Qualifications Education * High School Diploma or GED required or equivalent required Experience * 6 months experience working in a pharmacy required and * 1-2 years Pharmacy technician experience in a retail or hospital setting preferred Licenses and Certifications * Registered technician in Maryland and has achieved pharmacy technician certification through a nationally accredited certification examination (such as PTCB) required This position has a hiring range of USD $19.55 - USD $34.25 /Hr.

About the Job The IV Production Technician prepares all medication for compounding performs IV preparation under sterile technique and packages medication for distribution for ordering entity according to policy and procedure manual. Primary Duties and Responsibilities * Accurately compounds and completes mixing of TPN in the appropriate timeframe as set forth by the productivity standards. * Accurately prepares all medication according to the mixing report prepared by the pharmacist utilizing good compounding technique. Labels patient specific medications for inspection by pharmacist. Records lot numbers and expiration dates on mixing reports for all dispenses. * Completes set up of TPN compounder according to policy and procedure for inspection by pharmacists. * Contributes to the achievement of established department goals and objectives and adheres to department policies procedures quality standards and safety standards. Complies with governmental and accreditation regulations. * Maintains daily production logs as outlined in the Policy and Procedure manual. Consistently signs off processes that will validate medications produced. * Maintains department facilities equipment and materials through cleaning and signs off processes that will validate accurate operation. * Participates in the on-call rotation and rotates to the prep area room as requested. * Participates in the ongoing review maintenance and revision of the CIVAC policy and procedures. * Performs other duties as assigned. * Receives all bins into the clean room for compounding and prioritizes mixing of medications. * Records data in Simplifi-797 including but not limited to temperature monitoring (incubator refrigerators and freezers) cleaning activities. Minimal Qualifications Education * High School Diploma or GED required or equivalent required Experience * 6 months experience working in a pharmacy required and * 1-2 years Pharmacy technician experience in a retail or hospital setting preferred Licenses and Certifications * Registered technician in Maryland and has achieved pharmacy technician certification through a nationally accredited certification examination (such as PTCB) required This position has a hiring range of USD $19.55 - USD $34.25 /Hr. General Summary of Position The IV Production Technician prepares all medication for compounding performs IV preparation under sterile technique and packages medication for distribution for ordering entity according to policy and procedure manual. Primary Duties and Responsibilities * Accurately compounds and completes mixing of TPN in the appropriate timeframe as set forth by the productivity standards. * Accurately prepares all medication according to the mixing report prepared by the pharmacist utilizing good compounding technique. Labels patient specific medications for inspection by pharmacist. Records lot numbers and expiration dates on mixing reports for all dispenses. * Completes set up of TPN compounder according to policy and procedure for inspection by pharmacists. * Contributes to the achievement of established department goals and objectives and adheres to department policies procedures quality standards and safety standards. Complies with governmental and accreditation regulations. * Maintains daily production logs as outlined in the Policy and Procedure manual. Consistently signs off processes that will validate medications produced. * Maintains department facilities equipment and materials through cleaning and signs off processes that will validate accurate operation. * Participates in the on-call rotation and rotates to the prep area room as requested. * Participates in the ongoing review maintenance and revision of the CIVAC policy and procedures. * Performs other duties as assigned. * Receives all bins into the clean room for compounding and prioritizes mixing of medications. * Records data in Simplifi-797 including but not limited to temperature monitoring (incubator refrigerators and freezers) cleaning activities. Minimal Qualifications Education * High School Diploma or GED required or equivalent required Experience * 6 months experience working in a pharmacy required and * 1-2 years Pharmacy technician experience in a retail or hospital setting preferred Licenses and Certifications * Registered technician in Maryland and has achieved pharmacy technician certification through a nationally accredited certification examination (such as PTCB) required

*English communication required* Hiring for 2nd & 3rd shift 2nd shift: 3:00p - 11:30p EST 3rd shift: 11:00a - 7:30a EST Must be able to train from 8:30am - 5:00pm EST for 1 month Flexibility to work Overtime is Required JOB SUMMARY The Production Operator performs functions relating to the processing of drug products, ensuring product compliance to established current Good Manufacturing Practices (cGMPs), customer requirements and in conjunction with all Standard Operating Procedures (SOPs). Follows standard procedures to complete tasks, some of which may vary in scope, sequence, complexity, and timing. Applies skills and knowledge to recognize issues and to increase efficiency, throughput, and quality. Understands and runs processes to meet the assigned standards/routers and fulfills the assigned schedule; when these are not achieved, participates in the debrief to understand the reasons why and what needs to be corrected moving forward. Assists in troubleshooting process issues. Responsible for the safe and efficient execution of job duties. Production Operator Trainee - Operator I Pay rate: $18 - $22 / hour Production Operator II - III (Skilled Operators)- must have OSD Manufacturing experience Pay rate: $22 - 33 / hour (Flexible based on experience) Key Accountabilities: Operates pharmaceutical production machinery and follows the procedures for manufacturing such as weighing, blending, dispensing, mixing, pellet coating, granulating, drying, milling, blending, compressing, Encapsulating, Coating, potent compound, etc. Meets the requirements for use of manufacturing equipment and other commonly used equipment per SOPs. Executes written SOPs to ensure the purity of materials involved in the manufacturing process. Properly uses all scales, including printouts, zeroing, setting tares, and daily calibration verification per SOPs. Examines manufacturer Product ID Labels, Quality Control release tags, and Batch Production Record to verify issued/staged raw materials can be released for production. Cleans manufacturing equipment and facilities according to established SOPs. Executes machine changeovers from batch to batch. May sample batches for quality testing. Executes required in-process product quality checks and documents accurately. Understands and runs processes to meet the assigned schedule and standards/routers; when this is not achieved, participates in the debrief to understand the reasons why and what needs to be corrected moving forward. Documentation: Completes documentation associated with manufacturing processes (e.g. batch record, protocols, and logbooks) with detail and accuracy. Meets requirements for entries on all applicable Batch Production pages, completion and attachment of all dispensary and weight verification tickets. Verifies the manufacturing process on BPR in an accurate and timely manner. Provides status updates and operational challenges on status boards. Continuous Improvement: Assists in troubleshooting process issues; refers deviations from standard procedure to the supervisor. Typically participates in at least one continuous improvement project of a moderate scope and complexity. Safety & Compliance: Adheres to all cGMP compliance/regulatory mandates and quality requirements. Participates in safety teams, start-up discussions, incident debriefing sessions, etc. Ensures compliance with SOPs, policies and procedures as required by the Company and regulatory agencies. Maintain a clean, organized, work area. Training: Conforms to all training requirements, including company required and machine-specific training. Teamwork & Collaboration: Contributes to team and project success by sharing previously acquired knowledge. Collaborates typically within own cross-functional work unit and occasionally with contacts outside own unit or department. Requirements - Trainee - Level I Operator: HS diploma, GED or College Associate Degree Minimum of 1-3 years experience in a labor intensive environment Forklift certification preferred. Ability to communicate and comprehend English language both verbally and written - Level II Operator (OSD/Solid Dose Manufacturing expereince required): HS diploma, GED or College Associate Degree Minimum of 3-7 years of OSD pharmaceutical manufacturing (cGMP) experience Forklift certification preferred. - Level III Operator (OSD/Solid Dose Manufacturing expereince required): HS Diploma, GED or College Associate Degree Minimum 7+ years of pharmaceutical manufacturing (cGMP) experience and certification in assigned area, as required or proficiency demonstrated in competencies as required. Forklift certification preferred. Required Knowledge & Skills for Level II & III Strong background in solid dose manufacturing (OSD) Experience in 1 or more of the following areas: Compression, Granulation, Encapsulation, Wurster Coating, Coating, Fluid Bed Dryers, Bead Tower Capable of cleaning, setting-up, dismantling and operating state of the art tablet presses and encapsulation, i.e., Fette 3200i; Fette P 3030; MG2 planeta; Korsch XM 12. Knowledgeable of FDA regulations, GMP, Lean Manufacturing, Six-Sigma, etc. Solid working knowledge and skills in procedures, techniques, tools, materials and/or equipment needed for the position. Basic math, reading, legible writing skills, and problem-solving abilities. Proficient in sampling batches Ability to participate in Continuous Improvement projects. Required for all levels: Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Physical Requirements: Must be able to stand for long periods of time (up to 12 hour shifts), maneuver at least 50 pounds, climb ladders, wear a respirator and pass associated respirator tests and/or requirements, and be able to wear all required PPE, including safety glasses, ear plugs, and safety shoes. Salary Description $18- $33 per hour (Flexible based on experience)

Yoh Life Sciences is hiring for a Production Technician in Rockville, MD. The Production Technician will support the veterinary diagnostic manufacturing processes. General responsibilities include assembling, filling, labeling, and kitting small light-weight products in a manufacturing laboratory environment. The position will also assist with order picking, packing and warehousing. Title: Production Technician Duration: Temp to Permanent Pay: $21/hr Location: Rockville, MD Shift: M-F 8-5pm Duties and Responsibilities: * Performing Manual tasks such as bottle filling and device assembly, pouching, labeling, and kitting. * Adhere to and accurately complete production documentation. * Perform set-ups, changeovers, and cleanups of work areas. * Maintain a safe and clean working environment. * Assistance with warehouse order picking, packing, and general warehousing. Education and Experience: * BS in a relevant science or technical discipline. * 5+ years working in a regulated environment in a quality or regulatory capacity. Required Skills: * Comprehensive understanding of basic scientific principles and biotech manufacturing processes. * Comprehensive understanding of and experience with GMP and ISO regulations. * Able to communicate technical matters clearly and professionally while guiding teams to compliant, creative. * solutions, Able to communicate clearly and firmly when noncompliant or potentially non-compliant situations are identified. * Able to work in a fast-paced environment handling multiple priorities with attention to meeting deadlines while working effectively and efficiently. * A willingness to think outside of the box and adapt industry best practices and trends to our small but growing business. * Highly organized with exceptional written and verbal communication skills. Must be fluent in English (written and spoken). * Ability to problem solve with several variables in a methodical and careful manner. * Strong functional proficiency using Windows, Word, Excel, and PowerPoint as well as the ability to quickly learn various job-specific computer applications. * Ability to work with colleagues, supervisors, vendors, and customers as needed. * Ability to be flexible and adaptable, willingness to help when needed. * Reliable attendance mandatory. * Able to walk and stand for extended periods of time on a variety of hard surfaces. * Ability to work in a warm, cold, or dry environment in a manufacturing production setting with exposure to working near moving mechanical parts. #IND-SPG Estimated Min Rate: $21.00 Estimated Max Rate: $21.00 What's In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh's network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh's extensive talent community that will provide you with access to Yoh's vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: * Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week) * Health Savings Account (HSA) (for employees working 20+ hours per week) * Life & Disability Insurance (for employees working 20+ hours per week) * MetLife Voluntary Benefits * Employee Assistance Program (EAP) * 401K Retirement Savings Plan * Direct Deposit & weekly epayroll * Referral Bonus Programs * Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit ************************************************ to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh's hiring clients' preferences. To learn more about Yoh's privacy practices, please see our Candidate Privacy Notice: **********************************

We have a wonderful opportunity for machine operators in Crofton, MD with a local manufacturer. QUALIFICATIONS Machine operator experience and mechanical skills Basic computer and math skills Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Must be a self-starter and work independently and assist other operators to set up machines and any other necessary tasks to adhere to deadlines and completion of product. Must make sure all housekeeping is maintained in a clear and orderly fashion in assigned area. Must be able to maintain a high level of accuracy in all aspects of work assignments and apply common sense understanding to carry out instructions furnished in written, oral, and diagram form. Ability to work a flexible schedule, lift/move product up to 50lbs, and will be required to frequently stand on their feet for extended periods of time. ESSENTIAL DUTIES AND RESPONSIBILITIES Run manufacturing equipment safely and efficiently and follow supervisor's instructions and the company's safety policies to ensure that the products coming off the machine meet company standards for quality. Safety and consistency are top priorities. Review instructions that tell you what product is being made, what materials are needed, and how the machine should be set up. Will physically adjust the machine's measuring devices - like stops, guides, or rulers - to control the length, height, or thickness of the product being made. Will keep an eye (and ear) out for anything unusual - like strange noises, jams, or defective output and inspect the finished product to make sure it looks right and meets company quality standards. Will handle simple maintenance tasks - cleaning, lubricating parts, replacing worn components, or checking oil levels - to keep the machine running well. You may help coworkers adjust or prepare their machines, or jump in to handle general labor tasks (like loading materials or stacking finished products) to meet production goals and may occasionally be asked to handle extra tasks that support production - such as helping in another department, loading trucks, or completing paperwork. Will be responsible for keeping your workspace clean and organized - sweeping up debris, putting tools away, and ensuring materials aren't blocking aisles. HOURS: 5am-5pm, Monday through Thursday Or 5am-5pm, Monday through Saturday one week and Tuesday through Saturday the next. PAY: Pay ranges from $18 to $22 an hour depending on experience. #ISS

Accelerate the possible by joining a winning Amcor team that's transforming the packaging industry and improving lives around the world. At Amcor, we unpack possibility through our innovative and responsible packaging to provide solutions that benefit our customers, our people and our planet. More than 10,000 consumers worldwide encounter our products every second and rely on us for safe access to food, medicine and other goods. We value their trust by making safety our guiding principle. It's our core value and integral to how we do business. Beyond this core principle, our shared values and behaviors unite us as we work together to elevate customers, shape lives and protect the future. We champion our customers and help them succeed. We play to win - adapting quickly in an everchanging world - and make smart choices to safeguard our business, our communities and the people we serve for generations to come. And we invest in our world-class team, empowering our colleagues to unpack their potential, because we believe when our people grow, so does our business. To learn more about playing for Team Amcor, visit ************* | LinkedIn | YouTube SUMMARY: Responsible for production and quality of machine output. Responsibilities Maintain productivity and quality output of Production Machines (to include Injection Molding, Compression Molding, Vision, and High Speed Assembly Machines). Perform tooling changes, set-ups, material changes on production equipment. Troubleshoot production machinery, and support equipment. Accurately complete routine paperwork Submit work order for repair of equipment beyond ability of department mechanic. Must perform any other assigned duties. Qualifications High school diploma or equivalent. Excellent attendance and good work history. Must score at least 65% on mechanical aptitude test. Able to quickly learn the mechanics of high speed lining machines. Prior mechanic experience. Knowledge of product and materials a plus. Able to provide or purchase own tools as needed. Capable of physical mobility including walking, sitting, bending, climbing, twisting, standing, pushing, pulling and lifting/moving (up to 50 pounds) Able to work in a production environment, recognizing various sounds and alarms. Able to work overtime as needed. Must perform all duties in a safe and effective manner. Additional Info Pay Range: $21.84 - 26.

Job Description: Mailroom/Machine Operator (Temp-to-Perm) We are seeking a reliable and detail-oriented Mailroom/Machine Operator for a temporary-to-permanent opportunity in our Glen Burnie, MD site. This role focuses on providing essential administrative support to business operations through the processing, sorting, and scanning of incoming mail and materials. The successful candidate will operate high-speed mail processing equipment and ensure complete accuracy and compliance in all tasks. Job Details Location Glen Burnie, MD (1000 Stewart Avenue) Schedule Full-Time: 40 hours per week Work Days Monday, Tuesday, Thursday, Friday, Saturday Days Off Wednesday and Sunday Shift Hours 6:00 AM - 2:30 PM Compensation $18.00 per hour Contract Length Temporary (11/17/2025 - 02/16/2026) with opportunity for Permanent Conversion Note: We are primarily seeking candidates residing in Anne Arundel County, MD, including Severn, Glen Burnie, Crofton, Linthicum, Ferndale, and Gambrills, due to current commute challenges from other areas. Key Responsibilities The Transaction Processing Specialist II will be responsible for a variety of mailroom and data capture duties, including: Mail Processing & Sorting: Operating high-speed Opex P40 mail sorter and Opex envelopener equipment. Performing physical sorting of mail into corresponding lockbox mail bins. Handsorting mis-sorted mail and other documents as assigned. Scanning & Data Capture: Conducting inbound scanning and delivery of receipted mail. Operating high/low speed capture equipment for transaction processing. Handling exceptions and similar activities related to document imaging. General Duties: Performing basic data entry and utilizing computer applications. Completing required accuracy and compliance testing. Performing clerical tasks as needed and other duties as assigned by management. Qualifications Must have basic data entry skills and working computer knowledge. Ability to operate mail sorting and opening equipment (training provided on specific models). Must be able to perform physical duties, including standing, walking, and lifting up to 10 lbs. High level of accuracy and attention to detail is critical. Ability to work the required schedule: Monday, Tuesday, Thursday, Friday, and Saturday from 6:00 AM to 2:30 PM. Next Steps If you are interested in this temporary-to-permanent role and meet the qualifications, please submit your application.

Leveraging the significant growth in construction across North America, driven by infrastructure modernization, a rise in advanced manufacturing, and the development of resilient cities. The newly listed entity will emerge as North America's premier building solutions provider, boasting a leading market position to fulfill its customers' highest aspirations with the most sophisticated building solutions from foundation to rooftop. WHAT YOU'LL ACCOMPLISH Safely and efficiently operate the Asphalt Transfer Machine. Control the material transfer vehicle to ensure a continuous supply of asphalt from trucks to the paver without interrupting paving operations. Guarantee consistent asphalt delivery to prevent segregation, maintain mat quality, and avoid cold joints. Monitor asphalt mix temperature and quality during transfer to ensure compliance with project specifications. Coordinate with dump truck drivers and paver operators to synchronize timing and material supply. Inspect the transfer machine before and after shifts; clean, lubricate, and report any mechanical issues. Follow traffic control plans, wear personal protective equipment (PPE), and operate equipment with an awareness of ground crew and surrounding hazards. Requirements WHAT WE'RE LOOKING FOR Education: High school diploma or equivalent Field of Study Preferred: N/A Required Work Experience: Minimum 2 years' experience Travel Requirements: DailyTravel Required Prior hands -on experience with material transfer vehicles (e.g., Shuttle Buggy) in asphalt paving operations. Knowledge of Asphalt Mix Handling Understanding of how to maintain proper temperature, prevent segregation, and ensure consistent material flow. Strong Coordination and Communication Skills Ability to work closely with truck drivers, paver operators, and ground crew to keep operations smooth and efficient. Mechanical Awareness: Basic knowledge of equipment maintenance and troubleshooting to minimize downtime and ensure reliability. Proven track record of following safety procedures and maintaining awareness of surroundings, especially in active job sites. Reliable attendance, willingness to work in varying weather conditions, and commitment to project timelines. Benefits Competitive salary Retirement Savings: Choose from 401(k) pre -tax and/or Roth after -tax savings Medical, Dental, Disability and Life Insurance Holistic Health & Well -being programs Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care Vision and other Voluntary benefits and discounts Paid time off & paid holidays Paid Parental Leave (maternity & paternity) Educational Assistance Program

Description: To operate equipment such as Press Brake, Laser, Powder Coat and other machines. Job Category: Hourly, 11am - 7:30pm. Monday through Friday. Prepare raw materials for processing. Operate and monitor equipment as assigned. Utilization of work order processing software. Participate in departmental meetings and training. Abide by all OSHA safety requirements including use of personal protective equipment (PPE). Assists in performance of routine preventive maintenance as well as inspections of assigned equipment. Follow established safety rules and regulations. Secondary Responsibilities Maintain a safe and clean workstation and production facility. Assist in performance of periodic departmental and facility wide inventories. Assist in periodic facility expansion and upgrade projects. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Salary & Compensation: The Machine Operator position is a full-time hourly position with approximate pay dependent upon qualifications and experience. All salary and compensation packages at FR Conversions are subject to applicable labor laws, FR Conversions standard company policies, and payroll law including taxes and withholdings. Job Categorization: The Machine Operator position is a full-time, hourly, FLSA non-exempt position. (SOC Code - 51-4081). This position is designated as a Safety Sensitive position. A Safety Sensitive position at FR Conversions is subject to post-offer and random drug/alcohol screenings. All positions at FR Conversions are subject to at cause and post-incident drug/alcohol screenings. Qualifications Job Requirements: 1+ years' experience in machine operation given preference. Experience with blue print/schematic reading a plus. Ability to individually lift 50-100 pounds. Physical ability to work full day lifting, bending, twisting, kneeling in a non-environmentally controlled work environment in a loud work environment. Ability to judge distances and read signs. This position may require employee to wear a respirator during job performance for extended periods of time. Applicant should be prepared to successfully pass physical and FIT testing for respirator usage. Current valid Driver's License and/ or OSHA Forklift Operators License is a PLUS but not required. Skill Requirements Familiarity with basic hand and power tools. Ability to work independently and within a group setting. Detail oriented. Verbal comprehension (understand oral and written communications). Communication skills (provide clear instructions/directions). Reasoning skills (problem solving and troubleshooting skills). Screenings Required: Pre-Employment Drug Test Pre-Employment Physical Pre-Employment Respirator Test and Fitting