Quality control technician jobs in Greenburgh, NY

At Corbion, we exist to champion preservation in all its forms, preserving food and food production, health, and our planet. The Quality Control Technician is a 2nd shift position based at the Totowa, NJ plant reporting to the Quality Control Supervisor. This role is responsible for performing daily analytical tests, pre-operation and line audits, and ensuring production procedures and systems are followed. The position ensures that all quality standards are consistently met while supporting the development of QC team members. Essential Functions * Follow all GMP's (Good Manufacturing Practices), FSMA, Safety, and Environmental regulations as well as company policies. * Maintain positive attitude. Focus on the customer, teamwork, and quality productivity. * Give recommendations to improve workplace safety, efficiency, and to better serve the customer. * Analyze finished product for various analytical testing including redox, Chittick, pH, %moisture, color, titratable acid (TA), enzymes, vitamins, proteins, etc., on a daily basis. * Daily verification/calibration of lab equipment prior to testing finished product to ensure product quality. * Maintain the cleanliness of the lab making sure that the areas are clean after testing. * Ensure that lot codes and finished products package is correct and legible. * Product that has been analyzed and does not meet specification, must be re-sampled and re-analyzed immediately. If product is not in compliance, HOLD stickers must be applied immediately and system hold activated. * Participate in and successfully complete all required laboratory training classes. * Complete the picking, testing and approval of raw materials, issuing deviation when the material is out of specification and reporting to the supervisor/manager. * Keeping record of the materials that need to be tested for micro and send the samples on time. * Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Education & Experience * Bachelor's Degree in Chemistry, Bio-Chemistry, Chemical Engineering, Biology or Microbiology. * Experience in a laboratory environment within a related industry is required. * SAP/Sample Manager experience preferred. Knowledge, Skills and Abilities * Strong analytical and problem-solving skills. * Knowledge of laboratory testing procedures and equipment calibration. * Ability to maintain compliance with GMPs, FSMA, HACCP, and company policies. * Strong communication and teamwork skills. Working Environment * Manufacturing plant with large open floor areas and loud machinery. * Exposure to high temperatures in summer and cold environments in winter. * Dusty environment due to raw materials. * Exposure to allergens including eggs, soy, sesame seeds, milk, and wheat. Physical Demands * Must wear GMP-compliant hair and beard nets, company-provided uniforms, gloves, and, in some areas, respirators. * Ability to stand for long periods and perform repetitive laboratory or line auditing tasks. * Must be able to lift up to 55 lbs. Our offer The below reflects the range of possible compensation for this role at the time of this posting. This range may be modified in the future. An employee's position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, performance, location and business or organizational needs. The base salary range for this role is $24.00 to $25.00 per hour. In addition, we offer: * Variable bonus potential * Paid time off, including company holidays * Medical, dental and vision coverage * 401K with company match * Education assistance * Short- and long-term disability * Employee Assistance Program (EAP) About Corbion Corbion is the global market leader in lactic acid and its derivatives, and a leading supplier of emulsifiers, functional enzyme blends, minerals, vitamins, and algae ingredients. We use our unique expertise in fermentation and other processes to deliver sustainable solutions for the preservation of food and food production, health, and our planet. For over 100 years, we have been uncompromising in our commitment to safety, quality, innovation and performance. Drawing on our deep application and product knowledge, we work side-by-side with customers to make our cutting-edge technologies work for them. Our solutions help differentiate products in markets such as food, home & personal care, animal nutrition, pharmaceuticals, medical devices, and bioplastics. In 2024, Corbion generated annual sales of €1,288.1 million and had a workforce of 2,399 FTE. Corbion is listed on Euronext Amsterdam. For more information: *************** Corbion is an equal opportunity employer and committed to a diverse workplace. All applicants will be considered equally without regard to race, color, ethnicity, veteran status, religion, national origin, marital status, political affiliation, age, sex, sexual orientation, handicapping condition, membership in an organization or any other non-merit factors. Corbion provides reasonable accommodation to applicants. EOE/M/F/Vet/Disabled Corbion does not accept unsolicited resumes from individual recruiters or third party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. All candidates must be submitted by approved Corbion vendors who have been expressly requested to make a submission by our Talent Acquisition team for a specific job opening. No placement fees will be paid to any firm unless such a request has been made by the Corbion Talent Acquisition team and such candidate was submitted to the Corbion Talent Acquisition Team.

I have an awesome Lead QC Reference Tech role available near Mineola, New York State! Details - Full-time and permanent - Shift: Evenings - Opportunities for growth - Full, comprehensive benefits package (PTO, health insurance, life insurance, 401k, etc) - Pay: 113k/year Requirements - College degree - NYS license - ASCP cert - Prior experience, including leadership Click apply or email your resume to leah@ka-recruiting.com/call or text 617-746-2751! You can also schedule a time to chat here -https://calendly.com/leahkarecruiting/10min. REF#LM2493

JobID: 210684391 JobSchedule: Full time JobShift: Base Pay/Salary: Brooklyn,NY $142,500.00-$200,000.00; Jersey City,NJ $142,500.00-$200,000.00 Join our team to play a pivotal role in mitigating tech risks and upholding operational excellence, driving innovation in risk management. As a Tech Risk & Controls Lead in Cybersecurity Technology & Controls, you will be responsible for identifying, and mitigating compliance and operational risks in line with the firm's standards. You will also provide subject matter expertise and technical guidance to technology-aligned process owners, ensuring that implemented controls are operating effectively and in compliance with regulatory, legal, and industry standards. By partnering with various stakeholders, you will contribute to the reporting of a comprehensive view of technology risk posture and its impact on the business. Your advanced knowledge of risk management principles, practices, and theories will enable you to drive innovative solutions and effectively manage a diverse team in a dynamic and evolving risk landscape. Job responsibilities * Develop and maintain robust relationships, becoming a trusted partner with LOB technologists, assessments teams, and data officers to facilitate cross-functional collaboration and progress toward shared goals * Execute reporting and governance of controls, policies, issue management, and measurements, offering senior management insights into control effectiveness and inform governance work * Proactively monitor and evaluate control effectiveness, identify gaps, and recommend enhancements to strengthen risk posture and regulatory compliance * Lead and execute complex, cross-functional GRC programs and initiatives, ensuring they achieve strategic outcomes and align with business objectives * Identify, manage, and mitigate delivery risks, proactively addressing potential roadblocks and implementing contingency plans to maintain program momentum * Partner with key stakeholders to iterate on design, implement, and continuously operate and enhance technology risk and control frameworks, ensuring they meet industry standards and regulatory requirements Required qualifications, capabilities, and skills * Obtain 6+ years of experience or equivalent expertise in technical program management, cybersecurity, and/or technology controls roles * Proficiency in cybersecurity domains, including policies and standards, risk and control assessments, and regulatory compliance * Proficiency in regulatory, legal, and industry standards such as NIST, ISO 27000 family, COBIT, FSP etc. * Experience in developing, implementing, and operating robust risk and control frameworks to mitigate technology failure and cybersecurity risks * Ability to ensure decisions or constraints affecting program delivery are effectively escalated and addressed in a timely manner * Strong verbal and written communication skills to translate technical risks into business impacts and engage with stakeholders at all levels * Strong analytical skills to dissect complex challenges, conduct thorough root cause analysis, and develop effective solutions * Proficient knowledge and expertise in data security, risk assessment & reporting, control evaluation, design, and governance, with a proven record of implementing effective risk mitigation strategies * Demonstrated ability to influence executive-level strategic decision-making and translating technology insights into business strategies for senior executives Preferred qualifications, capabilities, and skills * CISM, CRISC, CISSP, or similar industry-recognized risk and risk certifications are preferred #CTC

Join our team to play a pivotal role in mitigating tech risks and upholding operational excellence, driving innovation in risk management. As a Tech Risk & Controls Lead in Cybersecurity & Technology Controls, you will be responsible for identifying, and mitigating compliance and operational risks in line with the firm's standards. You will also provide subject matter expertise and technical guidance to technology-aligned process owners, ensuring that implemented controls are operating effectively and in compliance with regulatory, legal, and industry standards. By partnering with various stakeholders, including Product Owners, Business Control Managers, and Regulators, you will contribute to the reporting of a comprehensive view of technology risk posture and its impact on the business. Your advanced knowledge of risk management principles, practices, and theories will enable you to drive innovative solutions and effectively manage a diverse team in a dynamic and evolving risk landscape. Job responsibilities Ensure effective identification, quantification, communication, and management of technology risk, focusing on root cause analysis and resolution recommendations Develop and maintain robust relationships, becoming a trusted partner with LOB technologists, assessments teams, and data officers to facilitate cross-functional collaboration and progress toward shared goals Execute reporting and governance of controls, policies, issue management, and measurements, offering senior management insights into control effectiveness and inform governance work Proactively monitor and evaluate control effectiveness, identify gaps, and recommend enhancements to strengthen risk posture and regulatory compliance Required qualifications, capabilities, and skills 5+ years of experience or equivalent expertise in technology risk management, information security, or related field, emphasizing risk identification, assessment, and mitigation Familiarity with risk management frameworks, industry standards, and financial industry regulatory requirements Proficient knowledge and expertise in data security, risk assessment & reporting, control evaluation, design, and governance, with a proven record of implementing effective risk mitigation strategies Demonstrated ability to influence executive-level strategic decision-making and translating technology insights into business strategies for senior executives Preferred qualifications, capabilities, and skills CISM, CRISC, CISSP, or similar industry-recognized risk and risk certifications are preferred

Perform daily inspections of all production lines to ensure compliance with Good Manufacturing Practices (GMPs) and company standards. Accurately document all inspection details, including incoming lot numbers, liquid lot numbers, item numbers, fill weights, and defects. Ensure that all manufacturing specifications for components, labeling, and products are correct, clear, and complete. Inspect work areas for removal of all previous products and components and verify readiness prior to use. Responsibilities * Monitor, sample, and inspect in-process finished products for quality by performing appropriate tests. * Collect data and samples to support the disposition of products. * Determine final disposition of inspected products and verify information on transfer tickets. * Apply appropriate disposition labels to materials. * Identify and notify Production and Quality teams when discrepancies from procedures and specifications are observed. * Perform AQL inspections as required. * Execute rework protocols as needed. * Initiate and log LIMS and retain samples. * Print specifications from ERP systems, create shop order packages, and provide them to Production as needed. * Collect samples required by customers or PDI specifications and ship samples accordingly. * Collect stability samples. * Execute trials and validations. * Review documentation for accuracy before submitting to the QA Release team. * Review Master Batch Records and act as Lead QA Inspector in their absence. * Identify continuous improvement opportunities and promote a culture of quality. * Handle assignments to establish and maintain product quality. * Perform required testing as per SOPs and WIs. Essential Skills * Quality assurance and inspection experience. * Minimum of 3+ years of quality experience in a regulated environment. * Strong understanding of GMPs, quality systems, and regulated manufacturing environments. * Working knowledge of AQL inspection standards, sampling plans, and in-process quality control methods. * Familiarity with batch documentation, manufacturing specifications, and component/label verification. * Proficiency in Microsoft Office Suite (Word, Excel, Outlook). * Ability to learn and operate quality-related systems such as LIMS, ERP, and electronic documentation tools. * Demonstrated experience performing in-process quality inspections, line clearances, material disposition, and documentation review. * Experience supporting trials, validations, rework activities, and sample collection. * Prior exposure to continuous improvement, deviation identification, and collaboration with Production/Quality teams. * Strong ability to interpret and follow SOPs, Work Instructions, Master Batch Records, and product specifications. * Excellent documentation accuracy, attention to detail, and commitment to 'first-time-right' execution. * Effective communication skills with the ability to escalate discrepancies and collaborate across teams. * Solid organizational, multitasking, and time-management skills. Additional Skills & Qualifications * Associate's Degree in a scientific, technical, or related field, or equivalent combination of education and experience. * Ability to take initiative and identify improvement opportunities. * Excellent organizational and leadership skills. Job Type & Location This is a Permanent position based out of Orangeburg, NY. Pay and Benefits The pay range for this position is $55000.00 - $60000.00/yr. Medical & Prescription benefits Dental and vision insurance Life insurance Health Savings Account Flexible Spending Account Disability Insurance EAP/Health Advocate Auto & Homeowners insurance Pet Insurance Tuition Reimbursement 401k + match Workplace Type This is a fully onsite position in Orangeburg,NY. Application Deadline This position is anticipated to close on Jan 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Summary: Oversee the production process, ensuring safety and quality standards are met. Required Skills/Abilities: Prior food service industry experience is a plus. Must have good written, verbal, and math skills. Basic computer knowledge, ERP system, Microsoft Excel, Microsoft Word, PowerPoint Must be highly detail orientated. Ability to understand documents such as safety rules, operating and maintenance instructions, and procedure manuals Ability to write routine reports and correspondence in English Responsibilities: Responsible for daily QA function within a food processing plant. Daily, perform a pre-operational sanitation checklist for buildings A, B, C, and D Perform an operational sanitation checklist for buildings A, B, C, and D for each production day. Monitors production compliance with HACCP Plan Perform ATP test after deep cleaning procedures and after allergen productions. Determine conformance or nonconformance and take corrective action when necessary. Check traceability records compared with actual lot numbers and correct any discrepancies. Periodic audit of Recipes to see if followed. Periodic line studies to pinpoint sources of increased micro count on product. Collect and maintain reference samples for all products manufactured daily for freezer storage. Collect records from the previous day's production. Check the thawing process and document. Check all temperatures around the facility and record them on the Daily Temperature Log sheet and Pre-shipment HACCP record (2x Daily- am. / p.m.) Take aseptic raw material and finished good samples for microbiological analysis. At least every hour, makes a production inspection for (if specifications are met): The thickness of the dough Raw product integrity Internal product temperature (when applicable). Organoleptic inspection. Cooling tank operating Product condition after the freezer Packing machine operation, package seals Proper film bag, bag code date Box label and code date Metal detector Weight Employee dress Floor area Monitor all areas of production Water pick up when doing Precooked items. Perform pH testing and Bostwick (Sauce plant) When product is out of specification, put product on HOLD following SOP. When Metal Detector rejects product, QA must inspect product following SOP Check sanitizer concentration once a week. Check soap concentration once a week using a test kit. Education/Experience: High School Diploma or equivalent Manufacturing experience Work Environment: While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts; and toxic or caustic chemicals The employee is occasionally exposed to the risk of electrical shock Hot or cold temperatures The noise level in the work environment is loud Physical Requirements: Able to lift or move up to 50 pounds, with or without assistance Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus While performing the duties of this job, the employee is regularly required to stand; use hands; reach with hands and arms and stoop, kneel, crouch, or crawl. Ability to stand for long periods The employee is frequently required to walk and talk or listen to other employees/line leaders/supervisor

JOB TITLE: Quality Control Technician TYPE: Full time, regular COMPENSATION: $20.00/hr - $28.00/hr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Quality Control Technician will play a key role in ensuring the quality and reliability of Clarapath s advanced electro-mechanical medical device, SectionStar . This position is essential for inspecting components, assemblies, and finished products to verify conformance with specifications and quality standards. The ideal candidate will have a strong foundation in inspection methods, measurement techniques, and documentation practices, supporting both manufacturing and engineering teams to maintain consistency across production. We re looking for a hands-on, detail-oriented team player who thrives in a fast-paced environment and takes pride in upholding the precision and quality that define Clarapath s products. Responsibilities: Inspect incoming materials, in-process assemblies, and finished products using measurement tools and visual inspection techniques Interpret engineering drawings, specifications, and inspection procedures to verify conformance Record and maintain inspection data, generating non-conformance reports (NCRs) when necessary Collaborate with Quality, Manufacturing, and Engineering teams to identify and resolve quality issues Perform functional and dimensional testing using calipers, micrometers, gauges, CMMs, and other inspection tools Support calibration and maintenance of inspection equipment Assist in root cause analysis and corrective/preventive action (CAPA) activities Maintain cleanliness and organization in inspection and test areas Ensure compliance with ISO 13485, FDA, and internal quality system requirements Qualifications: High school diploma or equivalent required; associate degree or technical certification preferred 1 3 years of experience in quality inspection, preferably in medical devices, precision manufacturing, or electronics Proficient in the use of precision measurement instruments (calipers, micrometers, gauges, etc.) Ability to read and interpret mechanical drawings and technical specifications Strong attention to detail and documentation accuracy Familiarity with quality management systems (QMS) and manufacturing processes Basic computer skills (Microsoft Office, ERP systems experience, a plus) Team-oriented with strong communication and problem-solving skills Company Offers: Competitive salary will be commensurate with experience and education Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays). A collaborative and diverse work environment where our teams thrive on solving complex challenges Ability to file IP with the company Connections with world class researchers and their laboratories Collaboration with strategic leaders in healthcare and pharmaceutical world A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

A manufacturing company in Norwalk, CT is looking for a Quality Control Operator. The ideal candidate will have a keen eye for detail, strong analytical skills, and a commitment to continuous improvement. Primary responsibilities will involve monitoring the production process, conducting routine inspections, and performing tests on materials and finished products. You will work closely with production teams to identify and rectify any quality issues, ensuring compliance with industry regulations and internal standards. The Quality Control Operator will also be responsible for maintaining accurate records of inspections and tests, providing feedback to team members, and assisting in the development of quality control procedures. Responsibilities Conduct routine inspections of products during various manufacturing stages. Perform tests on raw materials and finished products to ensure compliance with quality standards. Document inspection results and communicate findings to relevant team members. Identify and report any quality issues or deviations from established standards. Collaborate with production teams to implement corrective actions and improve processes. Assist in the development and maintenance of quality control procedures and protocols. Participate in internal audits and assist with external audits as needed. Requirements High school diploma or equivalent; additional certifications in quality control preferred. Proven experience in a quality control role, preferably in a manufacturing environment. Strong attention to detail and excellent analytical skills. Ability to interpret technical documents, blueprints, and quality standards. Strong communication skills, both written and verbal, with the ability to work effectively in a team. Pay is $22/hr Hours are Monday - Friday 7:50am - 4:20pm. Must be able to pass background check.

QC Technician oversees regulatory and quality compliance in bakeries, including QC monitoring and issue reporting. It also involves contributing to bakery R&D efforts, working with consultants to develop new products. JOB DUTIES (include but are not limited to the following): Monitor and support the implementation and maintenance of whole Quality Management System. Those programs are but not limited to: record keeping, allergen, pest control, temperature of coolers and freezers, pre-op, internal audit, and quality control. Monitoring the daily QC activities to ensure they are performed to the published procedures and are properly documented. Visit corporate and franchise stores to support and educate bakery teams/ kitchen managers. Regulate quality control of each bakery. Identification of any quality problems and recommend changes in quality standard where necessary. Working with consultants on innovating new potential products for the brand. Testing new recipes in the test kitchens. Data entry using common computer database software (Excel, Access or equivalent). QUALIFICATIONS & SKILLS: Prior bakery experience is required, with preferred experience in bakery industry research and development. Knowledge of baking various types of bread and baking and decorating cakes. Associate Degree, or Bachelors degree, or equivalent years of work experience 3-5 years of combined experience in food or ingredients and manufacturing. Knowledge of GMPs and HACCP. Basic understanding of food production fundamentals Proficiency in MS Office Products (Outlook, Word, Excel & PowerPoint) and basic computer skills. Excellent verbal and written communication skills. Ability to read and interpret procedure manuals and regulatory documents, and to write reports. Ability to effectively present information and respond to questions from management level. Demonstrate ability to manage and prioritize multiple tasks and demands working with minimum supervision. Detail oriented, excellent record keeping and documentation skills Employee Benefit Health Insurance options: PPO Medical, Dental, Vision covered (Company 100% paid) *insurance starts on the very 1st date. Life Insurance (Company 100% paid) Flexible Time (starting time can vary everyday) Short Term and Long-Term Disability Leave (short term 100% covered) Lifestyle Allowance (up to net $70 per Month) Cellphone reimbursement eligible Employee Discounts (40% off company products & services) 401(k) 5% Match (no vesting period!) from Day 1 Paid Time Off (generous and increases by tier!): Max ceiling of 180 hours PTO (15 days) the 1st year and increases by tier. Wellness Day: 40 Hours (Use it or Lose it System) Paid Maternity Leave (paid 100% for 12 weeks) Paid Secondary Caregiver Leave (up to 2 weeks) Paid Creative Leave Paid Holidays (11 days) Educational Benefit Employee Club Activities & Much More! Experience: Baking: 2 years (Required) Willingness to travel: 25% (Required)

Performs formulations of Clinical Chemistry, Co-Oximeter, and/or Coagulation controls and reagents using various automated and manual techniques. Formulations are to be performed in accordance with established Quality Standards and GMP requirements Responsibilities Key Accountabilities: Must be capable of performing all duties required of a Formulation Tech I. Assists in the formulation of products with senior team personnel. Must demonstrate good understanding of all team Standard Operation Procedures. Maintains equipment in compliance with Good Manufacturing Practices and written Standards of Procedures. Assists in all areas of team as needed. Maintains manufacturing documentation and records, i.e., Standard Production. Methods, enzyme use logs, sterilization charts, etc. Initiates purchase requisitions for team supplies as needed. All other duties as assigned by manager Budget Managed (if applicable) N/A Internal Networking/Key Relationships To be determined based on department needs Skills & Capabilities: Oral and written communication skills Qualifications Min Knowledge & Experience Required for the Position: B.S. in a Science field or equivalent plus 2 years of experience Physical Requirements This position requires the ability to lift and move materials per current OSHA standards. International Mobility Required: No Travel Requirements: No The hourly wage range Werfen reasonably expects to pay for the position is $25 to $28. Compensation is reasonably based upon multiple factors including education, relevant experience, skillset, knowledge, and specific needs of the business.

Job DescriptionOverview We are seeking a dedicated and detail-oriented Quality Assurance Receiving Technician to join our team in Totowa, NJ. In this role, you will play a crucial part in ensuring that all incoming materials meet our quality standards before they are utilized in our production processes. If you have a keen eye for detail and a passion for quality, we want to hear from you! Responsibilities Inspect and verify the quality of incoming materials against established specifications. Document and report any discrepancies or defects in received materials. Collaborate with suppliers to resolve quality issues and ensure compliance. Conduct routine audits of receiving processes to maintain high-quality standards. Assist in the development and implementation of quality assurance protocols. Maintain accurate records of inspections and quality assessments. Participate in team meetings to discuss quality improvements and best practices. Qualifications High school diploma or equivalent; additional education in quality assurance or a related field is a plus. Previous experience in quality assurance or receiving roles preferred. Strong attention to detail and excellent observational skills. Ability to work independently as well as part of a team. Familiarity with quality control methodologies and tools. Effective communication skills, both verbal and written. Proficient in basic computer applications and data entry.

Job Description : Freshline Produce LLC., a premium fresh fruit and vegetable processor based in Mahwah, NJ, is seeking a talented Quality Assurance Technician, for its 1st shift, to join its fast growing organization. This is perfect opportunity for a candidate looking to begin their QA career in the food industry. Responsibilities: Incoming Raw Materials/ Inspection/ Inform QA Manager and Operations Manager if there are quality issues. Fill out Receiving Log Identify, label, date, and make a daily inventory list of all WIP products in the coolers Production Line Quality Checks including product quality, case quality, Tsunami checks, Metal detector check and room temperature checks Practice and enforce GMP regulations - (Hand washing, no jewelry, no gum) Recognize and examine all inventory at all times Serve as member HACCP Team Requirements: Good communication, training and interpersonal skills Very detail oriented Strong problem solving skills Bi-lingual (English and Spanish) is preferred Experience in the food industry is a plus Effective organizational skill; Able to manage priorities and complexities Intermediate computer skills Proficiency with Microsoft Word, Excel and Outlook Strong multi-tasking skills

Raycap, Inc. is seeking a highly motivated Quality Inspector. In this role, the Quality Inspector inspects components, sub-assemblies, and finished products received and/or built internally. This position works with Quality Management to implement the proper sampling plans based on component specifications, inspection plans, or customer-supplied requirements and to provide guidance on required quality tools, methods, and data to ensure that the shipped product fulfills all customer specifications and quality requirements. This position monitors and maintains Raycap quality processes to assure continual 100% customer satisfaction. Shift: Monday - Friday (11:00 p.m. - 7:30 a.m.) with overtime as required. Primary Job Responsibilities Collects quality data as required to derive quality objectives Executes and maintains comprehensive quality product inspections Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes, and implementation of permanent corrective and preventive actions Follows and promotes the use of and implementation of internal quality standards and procedures Reviews documentation for compliance with quality standards Inspects First Articles, incoming components, raw materials, fabricated parts, and in-process assemblies and subassemblies, products per Inspection Plans and Specification Requirements Conducts subassembly tests as required to ensure quality products Uses measuring equipment such as calipers and gauges Audits and monitors quality requirements in accordance with the company's quality assurance policies and customer specifications Documents and reports inspection findings, results, and monitors corrective actions to the inspection findings Regular adherence to performance of applicable procedures in the Quality Management Systems (QMS), Environmental Management (EMS), and Occupational Health & Safety standards (OHSAS); ensuring processes remain sustainable, suitable, and effective in relation to the position Continuous assessment of opportunities for improvement and any needed changes to management systems Qualifications Hands-on quality and manufacturing experience in an ISO certified environment. Proficient in MS Office, Access, Outlook, and Adobe programs Experience with Document Control software Familiarity with SAP, ISO-9001, knowledge and application of DFx, FMEA, or similar Quality Systems is a plus Who We Are Raycap, Inc. creates products that protect and support the world's most valuable assets. We support advanced solutions for telecommunications, renewable energy, transportation, defense, and other applications worldwide. We offer A competitive benefit package Paid Time Off from day one 10 annual company-paid holidays A Tuition Reimbursement program A generous 401(k) employer contribution Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, gender identity, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested. Ability to complete a full analysis on all EEE Devices within the Laboratory Ability to operate all test equipment within the Laboratory Department Identify nonconformity to provide data to Quality Manager. Ability to communicate, document and report all nonconformity within internal system and direct supervisor. Ability to conduct work as assigned by senior management. Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day. Ability to understand industry traceability and documentation requirement as required for each industry Ability to evaluate and differentiate between various commodity types. Review and implement detailed inspection reports to provide all information regarding product testing and inspection Compile, review data and complete test reports IAW CTG Standards Ability to use general inspection gages, Ex. Calipers, Micrometers, etc. Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements. Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity. Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements. For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports. Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC - Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts - Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Daily throughput (inspections/Lab steps completed) Quality Issue detections (Incoming NCM ) Outgoing Quality (customer Escapes) IDEA Certification and knowledge implementation Use of GD&T and FAI knowledge for timely FAIR completion Issue communication Daily 6S/ESD/FOD policies followed Ability to find datasheets/drawings information on CTG Systems Diversity of inspections (EC/EM/HA/Hardware/etc) Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY High School Diploma or equivalent with a minimum of 2 years' experience performing in-process and final inspection preferably in a machining, automotive or aerospace business Must be proficient in English, both written and verbal communication skills Good arithmetic skills are required Mechanical aptitude desired Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word Independent; can work with limited supervision and direction Must complete IDEA-ICE-3000 Certification within 6 months of hire. Able to pass internal testing and training to meet internal requirements ASQ CQI certified or must completed certification within 1 year of accepting position Strong Electronics inspection knowledge preferred Must demonstrate acceptable vision requirement.

At Coco, we're revolutionizing last-mile delivery with autonomous robots, making deliveries faster, more efficient, and more sustainable. We're looking for a proactive and tech-savvy Office Manager to oversee our facility operations, ensuring our teams have the resources and environments needed to thrive. About the Role As a Fleet Quality Technician, you'll be the backbone of our robot operations, assembling, maintaining, and deploying delivery robots with precision while leading efforts to diagnose and resolve hardware, electrical, and IoT issues. You'll design repeatable solutions that scale, perform hands-on repairs and testing, and provide critical feedback that drives future hardware improvements. This role is fast-paced, technical, and highly dynamic-perfect for someone who thrives on problem-solving, takes pride in getting things right the first time. What You'll Do Serve as the technical lead during robot deployments, identifying and resolving mechanical, electrical, and software integration issues in real time Own the root-cause analysis and resolution process for fleet quality issues that impact launch success or fleet uptime Design and implement scalable SOPs, tools, and diagnostics for frontline teams to reduce downtime and improve serviceability Collaborate with Engineering, Supply Chain, and Field Operations to close the loop between product issues and fixes Provide structured feedback to Product & Engineering teams and help pilot new hardware, software, or process changes in the field Build lightweight dashboards, diagnostic logs, and technical documentation that can be adopted across teams About You 4-6+ years in hardware operations, fleet maintenance, or field engineering with a focus on mechanical and electrical systems Deep experience troubleshooting mechanical, electrical, and IoT (connectivity/sensor/data) issues Strong systems thinking mindset-you see the big picture and design processes to solve root causes, not just symptoms Independent, self-motivated, and solution-oriented-you don't wait to be told what's broken Excellent communicator with the ability to work fluidly across technical and non-technical stakeholders Familiarity with SQL, JIRA, inventory systems (e.g., Oracle ERP), and basic data analysis to spot trends and validate fixes Comfortable in fast-moving environments and field-based problem-solving scenarios Bonus Points Prior experience in robotics, micromobility, autonomous delivery, or connected fleet operations History of developing technical SOPs, diagnostic workflows, or cross-team enablement tools Experience working closely with Engineering and Product teams to iterate on hardware or firmware in production environments

Job DescriptionDescription: Join our growing team as a Quality Systems Technician. In this role, you'll help maintain our company's high standards of food safety and product quality. You'll play a key part in supporting our BRCGS certification and ensuring we're always audit-ready. This position works closely with Production, Sanitation, Maintenance, and Warehouse teams to ensure every product meets our commitment to safety and excellence. Responsibilities Support audit preparation and documentation for BRCGS and third-party audits Organize, file, and maintain all Food Safety and Quality Systems records Conduct daily production checks to verify product consistency (color, shape, size, packaging, etc.) Monitor and verify Critical Control Points (CCPs) and Preventive Controls Report any quality issues promptly to the Quality Systems Supervisor Collaborate with cross-functional teams to ensure compliance with Good Manufacturing Practices (GMPs) Assist with sanitation documentation and monitoring activities Requirements: Strong attention to detail and organizational skills Proficiency with Microsoft Excel and Outlook Excellent written and verbal communication skills Ability to work independently and as part of a team A self-starter with a sense of urgency and commitment to quality Work Environment & Safety Adhere to all company safety policies and procedures Use proper protective equipment and follow safe work practices Remain alert and report any unsafe conditions immediately Our Commitment to You At Jimmy's Gourmet Bakery, we believe our team's success starts with feeling valued and supported. That's why we offer: Competitive pay and performance bonuses 401(k) with company match Health, dental, and vision insurance Company-paid life insurance and EAP support Generous PTO and career growth opportunities Join a team that values your contributions and well-being.

Syensqo is all about chemistry. We're not just referring to chemical reactions here, but also to the magic that occurs when the brightest minds get to work together. This is where our true strength lies. In you. In your future colleagues and in all your differences. And of course, in your ideas to improve lives while preserving our planet's beauty for the generations to co We are looking for: We are seeking a motivated and detail-oriented Technical Service Chemist/Engineer to join our Polymer Additives team. This role is responsible for providing technical support to customers and internal teams, with a strong emphasis on hands-on polymer processing. The ideal candidate will have experience with polymer additives, laboratory testing, and polymer processing equipment such as extrusion, injection molding, and compression molding. We count on you for: * Prepare resin/additive formulations and produce test specimens using injection and compression molding to support both existing product testing for customer projects and new product development (NPI projects). * Perform hands-on laboratory operations, including polymer processing, color and gloss measurement, physical property testing, and data analysis. * Prepare presentations and project updates for customer-related and NPI projects. * Document and update laboratory procedures in accordance with Standard Operating Procedures (SOPs). * Maintain calibration and maintenance schedules for laboratory equipment. * Troubleshoot and resolve operational issues with laboratory equipment. * Coordinate and execute Joint Customer Technical Service Work Requests (TSRs) in a timely manner. * Collaborate with field Technical Service and Sales teams to provide monthly data summaries and project updates. * Maintain a regional database of all completed and active projects, including documentation of commercial outcomes. * Stay current with technological developments in core market segments. * Coordinate with third-party laboratories and Stamford Analytical to complete required analyses. You can count on us for: * We offer the opportunity to join an exciting growth company * A full range of benefits as expected of a successful company * Opportunities for growth and learning * Encouraging a diverse and inclusive workplace culture that values and respects individual differences and backgrounds * Long-lasting excellent customer relations, self-dependent working, and a variety of tasks in one of the world's leading chemical companies. You will bring: * Associate degree with 3+ years of relevant experience, or Bachelor's degree (B.S.) with 0+ years of experience in Plastics Engineering, Chemical Engineering, Chemistry, Polymer & Material Science, or a related field. * Hands-on experience with polymer processing equipment (extrusion, compounding, injection molding, compression molding) preferred. * Demonstrated troubleshooting and problem-solving skills in polymer processing environments. * Proficient in operating polymer processing and testing equipment: injection molding, polymer extruder, colorimeter, gloss meter, Instron, thermal oven, melt-flow tester, heated press, UV-Vis, FT-IR, etc. * Strong analytical skills with attention to detail and the ability to interpret complex data. * Customer-focused with a commercial and marketing mindset. * Proactive, flexible, and able to take initiative. * Creative and open to new ideas. * Excellent presentation and communication skills. * Effective team player with the ability to manage multiple projects and meet deadlines. * Committed to understanding and meeting customer needs. You will get: * Competitive salary and benefits * The U.S. base salary range reasonably expected to be paid for this position is $78,500.00 to $103,000.00 per year. Since actual compensation packages are based on a variety of factors unique to each candidate we may ultimately pay more or less than the posted base salary range. Total compensation for this role also includes bonus and/or other incentives. * 16, or more, weeks of maternity/paternity and co-parenting leave, according to local regulations * Training platform for all employees * Free well-being sessions (physical and psychological) About us * Syensqo is a science company developing groundbreaking solutions that enhance the way we live, work, travel and play. Inspired by the scientific councils which Ernest Solvay initiated in 1911, we bring great minds together to push the limits of science and innovation for the benefit of our customers, with a diverse, global team of more than 13,000 associates. Our solutions contribute to safer, cleaner, and more sustainable products found in homes, food and consumer goods, planes, cars, batteries, smart devices and health care applications. Our innovation power enables us to deliver on the ambition of a circular economy and explore breakthrough technologies that advance humanity. * At Syensqo, we seek to promote unity and not uniformity. We value the diversity that individuals bring and we invite you to consider a future with us, regardless of background, age, gender, national origin, ethnicity, religion, sexual orientation, ability or identity. We encourage individuals who may require any assistance or accommodations to let us know to ensure a seamless application experience. We are here to support you throughout the application journey and want to ensure all candidates are treated equally. If you are unsure whether you meet all the criteria or qualifications listed in the job description, we still encourage you to apply. * Syensqo is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected characteristics. Nearest Major Market: Bridgeport Nearest Secondary Market: Danbury

Benefits: 401(k) Dental insurance Health insurance Paid time off Seeking a Coffee Equipment Technician who wants to achieve excellence in themselves and be a member of a winning team. Handy person willing to learn and grow their skills in diagnostics, repairs and maintenance of commercial coffee/tea brewers, espresso machines, and coffee related foodservice equipment. Experience is greatly valued. Field work in the NY Metro area and Jersey City shop. Self-starter, with strong organizational skills. Ability to work with team members assisting customers to resolve coffee and equipment issues. Responsibilities: Troubleshoot, repair, install, adjust coffee and espresso brewing equipment Train customers in basic operations and maintenance from the user perspective Perform routine preventative maintenance as well as full refurbishment in shop and field Respond to work order requests in a timely fashion Work with team members and customers to resolve technical problems Ensure coffee quality standards at the point of sale Adhere to all company safety policies and procedures Job description is not intended to cover every single requirement of the job. The company reserves the right to change job duties at any time. Qualifications: Mechanical and electrical skills needed to repair and maintain equipment Desire to perform to the highest standards of excellence Diplomacy and communication skills needed to provide quality customer experience Ability to handle physical workload and lifting heavy equipment in excess of 50 lbs. Must have valid clean Drivers license Fluent in English both in speaking and writing . Salary Range: 50-70K, based upon experience Company Description: Kobrick Coffee Co. Inc. is a 105 year old Specialty Coffee Roaster based in the NYC area since 1920. Clients include Coffee Shops and Cafes, Restaurants, Hotels, and other food service venues who desire high quality coffee and top-level service and support from their coffee partner/roaster.

Job DescriptionDescription: RK Pharma Inc, a vertically integrated pharmaceutical company with our main manufacturing site in Pearl River, NY, is seeking a Quality Control Chemist to work with our growing Quality Teams as we scale towards commercial manufacturing in the next upcoming months. As a company focused on the development, manufacturing and sale of high quality and affordable generic pharmaceutical products worldwide we are looking for sharp, driven, self-directed individuals to help us grow our mid-stage start-up team. Requirements: If this sounds interesting to you, it's probably because up to this point you have: Bachelor of Science of higher 0-3 years of quality Control experience, preferably in a pharmaceutical, manufacturing, or regulated environment. Familiarity with cGMP, GDP, and standards. Proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint) and experience with ERP or document management systems (e.g., SAP, Master Control). Excellent organization, time management, and communication skills. The main responsibilities for this position are: Perform daily verification /performance check of the QC analytical instruments such as Analytical balance, Microbalance, KF titrator, KF coulometer, Auto titrator etc., Perform calibrations of all the QC analytical instruments/equipment's as per the calibration calendar schedule or when required. Perform Instrument/ equipment performance qualification as and when required. Maintain inventories of chemicals, Standards, samples etc., Operation, calibration, maintenance and qualification of all analytical instruments such as HPLC, GC, TOC, UV, IR, automatic titrator, dissolution equipment, etc. Follow the procedures as per the SOP's/ guidelines. Perform Sampling of raw materials, drug substance, packaging components, stability samples, cleaning samples, In-process samples and finished products. Perform analytical tests and wet chemistry tests on raw materials, drug substance, packaging components, stability samples, cleaning samples, In- process samples and finished products in compliance with the STP and SOP's. Follow and document all test results under GLP, GDP, GMP and Lab Safety guidelines. Document test results, problems and other issues, perform troubleshooting of issues that arise during analysis. Logging various samples received to QC as per the SOP into their respective log books. Monitors Stability chambers, Photostability chamber, freezers, refrigerators etc. Performs Stability samples loading/charging and pull-out according to the stability calendar. Record the results and prepares CoA to be released in a timely manner. Perform analysis using various software's such as Empower, Tiamo, Spectrum two, Flex etc. Write and perform investigation of out of specification results. Train other QC chemists in a timely manner on all the general Laboratory SOPs and test methods. Preparation and review of Standard Operating Procedures, specifications and STP's for Raw materials, Packaging components, drug substances and finished products (based on ICH/Pharmacopeial reference). Preparation and execution of protocols for Method Validations, Method Transfers, Cleaning Validation, Raw material qualifications, Stability studies and any other studies. Maintains lab, instruments, logbooks and notebooks at all times. Maintains lab instruments and performs calibration/preventive maintenance to ensure proper working order and troubleshoot when necessary. Perform additional duties and responsibilities designated by the supervisor on the need basis after receiving the required training. RK Pharma Inc is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.