Quality senior inspector job description

We are hiring a Senior Quality Inspector! As a Senior Quality Inspector, you will perform advanced quality control inspections, checks, and tests during the manufacture of products. You will inspect materials, parts and products at different stages of production. In this role you will also record observations and may make recommendations for improving processes.
Responsibilities:

* Approves incoming materials by confirming specifications, conducts visual and measurement tests, and rejects and returns unacceptable materials.
* Documents results of inspections and testing by completing reports and inputs data into quality database.
* Maintains controlled document files and test records.
* Coordinates calibration of test equipment and fixtures.
* Monitors critical equipment and instrumentation to ensure proper operation and calibration.
* Assists in writing and updating inspection procedures, protocol and checklists.
* Evaluates problems and makes initial recommendations for possible corrective action.
* Resolves basic problems by identifying key issues and patterns from partial/conflicting data which may require analysis to understand; more complex problems and decisions are discussed with supervisor/manager.
* May be required to apply discretion within established operational boundaries and procedures.

Qualifications:

* High School Degree or Equivalent required
* Associates' Degree (U.S.)/College Diploma (Canada) preferred
* Basic knowledge of quality testing machines and systems
* Some skills through job-related training to perform routine tasks
* 2-3 years of experience working with quality testing machines and systems
* 2-3 years of experience with job-related training such as quality inspection
* Ability to analyze information
* Ability to report research results
* Strong attention to detail
* Ability to use measurement equipment
* Basic computer skills

WESCO International, Inc., including its subsidiaries and affiliates ("WESCO"), is an Equal Opportunity and Affirmative Action Employer. It is the policy of WESCO to not discriminate against any job applicant or employee based on age, race, religion, color, handicap, sex, physical condition, disability, sexual orientation, gender identity, national origin, or protected veteran status or any other protected status. This policy includes but is not limited to the following: recruitment and employment, promotion, demotion, transfer, compensation, selection for training including apprenticeship, layoff, or termination.

#LI-HD1

At Materion, everyone is included, respected and offered opportunity to grow. Join us!

JOB SUMMARY
Inspect parts to appropriate visual and dimensional customer specifications; share responsibility for final quality to the customer; run reports and understand the work cell priorities; work closely with production; must be dedicated to "on time" results, committed to having no customer returns.

YOU WILL
Conduct dimensional inspections; use sales orders to apply correct customer specifications or exceptions Read and understand part prints and tolerances, know the order of governing documents Use a variety of measuring and data recording equipment, including at least micrometers (various types and sizes), profilometer, and metallographic camera.Train other employees on job duties, SOPs, and/or proper handling and processing functions asdirected Prepare reports, calculate and record statistical data as needed to reflect quality status of products

REQUIREMENTS
Technical degree or equivalent related training5 or more years of experience in quality-related discipline or field Can use a variety of inspection and measuring tools and techniques, including comparators Intermediate computer skills including understanding of systems like SAP, Microsoft Office SuiteOperate and calibrate various mechanical, electronic, optical, and nondestructive test instruments

The selection of the person to be hired for this position is contingent on the candidate having export compliance eligibility for access to U.S. controlled technology which comes under the licensing jurisdiction of the U.S. Department of State, International Traffic in Arms Regulations (ITAR) and the U.S. Department of Commerce, Export Administration Regulations (EAR).
The candidate selected will have to qualify as either a U.S. citizen, a U.S. National, a lawful permanent resident of the U.S., a Person Admitted into the U.S. as an Asylee or Refugee., a National of a country that is not prohibited from having access to U.S. controlled technology (via a letter of assurance), or a Person to be approved for an export license by the governing agency whose technology comes under its jurisdiction.

The selection of the person to be hired for this position is contingent on the candidate having export compliance eligibility for access to U.S. controlled technology which comes under the licensing jurisdiction of the U.S. Department of State, International Traffic in Arms Regulations (ITAR) and the U.S. Department of Commerce, Export Administration Regulations (EAR).

The candidate selected will have to qualify as either a U.S. citizen, a U.S. National, a lawful permanent resident of the U.S., a Person Admitted into the U.S. as an Asylee or Refugee., a National of a country that is not prohibited from having access to U.S. controlled technology (via a letter of assurance), or a Person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on Materion's determination that it will be able to obtain an export license in a time frame consistent with Materion's business requirements.

Materion Corporation and its subsidiaries (the “Company”) is an equal employment opportunity employer. It is the Company's policy to not unlawfully discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also the Company's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.
Applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and certain state or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on the Company. Please inform the Company's personnel representative if you need assistance completing any forms or to otherwise participate in the application process.

Please provide complete information. An incomplete application may affect your consideration for employment.

ASRC Federal is seeking a **NDE Quality Inspector** in Kennedy Space Center, FL.

ASRC Federal System Solutions (ASFF) brings a 14-year history of delivering high-performance space systems engineering, integration and satellite operations services to civil and defense agencies. ASFF provides these services throughout all phases of the program life cycle and across the entire space systems architecture, including space and ground assets.

**Job Description**

Non-Destructive Test (NDT) inspector supporting the Orion manned space flight program at Kennedy Space Center Neil Armstrong Building. It's a fast-paced manufacturing and Assembly, Test & Launch Operations environment. The candidate will work with an experienced Quality Engineering and NDT inspection team. Collaborates with engineering and manufacturing functions to ensure product quality and acceptance requirements are met. Position will also perform nondestructive engineering evaluation reporting including defect analysis and coordination with other operational and engineering groups.

Individual must be capable of obtaining Level 2 certifications in accordance with NAS410 qualification requirements in the following methods: Liquid Penetrant (PT), Ultrasonic Testing (UT), Visual Weld (VT), Eddy Current (ET), or Digital Radiography (DR), Computed Radiography (CR), and Film Radiographic Testing (RT). Prefer individuals with prior NAS410 Level 2 or 3 certification in multiple methods. Individual's duties will include reading/interpreting technical procedures and work instructions, as well as hands on evaluations for acceptance/rejection of products and engineering support for Space Systems. All individuals must be able to work independently. Individual will be expected to support program required inspections during off-shifts and with short notice to support program needs and schedules. Investigate instances of nonconforming material and facilitate the determination of root cause, corrective/preventative actions, recommendation of disposition for Material Review Board action. Reviews and/or approves inspection records for adequacy and compliance to procedures and quality standards.

**Requirements** :

**Basic Qualifications (Required Skills):**

+ Prior Aerospace experience with NAS410 (or equivalent) Level 2 or 3 certification in at least three of the following methods: Computed Radiography (CR). Digital Radiography (DR), Liquid Penetrant (PT), Magnetic Particle (MT), Ultrasonic (UT), Visual Weld (VT).

+ Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.

+ Must be willing to travel domestically to conduct NDT business.

+ Knowledge of Quality Systems and Processes.

+ Strong verbal and written communication skills.

+ Ability to multi-task, be thorough and detail oriented, with strong job closure and analytical skills.

+ Previous composite material inspection, AWS CWI experience, orbital ube weld inspections and Infrared Thermography Testing (IRT) certifications considered.

+ Must be a US Citizen.

ASRC Federal and its Subsidiaries are Equal Opportunity / Affirmative Action employers. All qualified applicants will receive consideration for employment without regard to race, gender, color, age, sexual orientation, gender identification, national origin, religion, marital status, ancestry, citizenship, disability, protected veteran status, or any other factor prohibited by applicable law.