TaylorMade Golf jobs in Memphis, TN

The Opportunity: Avantor is seeking a Maintenance and Reliability Supervisor to oversee facility maintenance activities. The Maintenance Supervisor's work involves complete maintenance control over designated areas and they will report to the Reliability Maintenance Engineering Manager. This is a full-time position based out of our Carpinteria, CA office with occasional travel to support other sites as needed. What we're looking for: Education: HS diploma or equivalent degree. A degree in mechanical, instrument/electrical, or another relevant discipline (preferred). Experience: Minimum of 5 years' experience in facility maintenance. Certifications: Certification in Reliability (CRL, CMRP, etc.) desired. Additional Qualifications: Must understand the RCM process, Failure Mode Identification, Defect Analysis, Cause and Effect Analysis, Loss Elimination, use sFMEA, RCFA Decision Logic, and FRACAS. Must understand ISO 55000 Asset Management. Expertise in CMMS best practices. Full understanding of strategic maintenance planning and scheduling activities Management and leadership skills. Budget planning skills. Good communication and reporting skills. Ability to communicate/teach/coach reliability best practices, condition monitoring, and precision methods. How you will thrive and create an impact: Supervise and ensure the safety of Maintenance employees. Oversee all maintenance activities in their area of the facility. Perform routine and turnaround maintenance and plant modifications. Evaluate and analyze products, components, materials, and equipment for the purpose of understanding and predicting failures. Review product designs, material specifications, and manufacturing capability to predict reliability and dependability. Create prototypes and conduct product tests to gather reliability data. Interpret test results and recommend solutions using appropriate statistical distributions and reliability models. Recommend product design changes or alterations in manufacturing processes and controls to ensure achievement of required reliability levels. Monitor production equipment diagnostics and review maintenance record in order to predict and prevent equipment down times. Document findings, including results of root cause analysis, and facilitate the implementation of necessary changes to ensure product and/or equipment reliability levels are maintained. May determine maintenance requirements and schedules for products and equipment. Ensure maintenance resources provide an effective, efficient, and cost-effective execution of maintenance schedules across the work area. Manage the area maintenance budget. Account for the maintenance functions in their area and take necessary action to ensure that key performance targets are met. Ensure that workforce is allocated to areas of responsibility in the most effective manner. Ensure supervisory support is provided to carry out Weekly, Daily, and Shutdown Schedules. Monitor key performance indicators (KPIs) and take appropriate corrective action. Approve purchase requisitions for direct purchase of materials promptly. Monitor execution of best practices to ensure compliance and take appropriate corrective action as necessary (with Operations Management). Follow up on Root Cause Analysis (RCA) recommendations to ensure corrective actions are taken promptly (with Operations Management). Define priorities for the area (with Operations Management). Define and update the 12-Month and 8-Week Event Schedules (with Operations Management). Identify work (early) to be done during scheduled shutdown events. Identify appropriate goals and objectives for each shutdown. Other duties as assigned. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $85,000.00 - $141,600.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ****************************** and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights poster. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Dayton, VA Job Type: Full Time Shift(s) Available: 2nd Compensation: $20.65/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Marathon Health Clinic (Employer sponsored health center) Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities HACCP Checks Work closely with USDA Assist with department set ups Ensure all safety practices are being followed Responsible for reconditioning station Complete HACCP paperwork Work on production line as needed Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to read/write/speak English Preferred Qualifications Previous Cargill experience Previous poultry experience Production experience Work history in the last 12 months Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement Equal Opportunity Employer, including Disability/Vet

We are seeking a Process Technician to support operations at a single manufacturing site and across customer locations. This role is critical in ensuring smooth onboarding of new jobs, validating processes handed off by R\&D, and maintaining sustainable production practices. Additionally, the Process Technician will provide technical support to ensure products remain in spec, lead quality and efficiency improvements, and assist with new product development initiatives. The ideal candidate will be highly organized, detail-oriented, and skilled at translating technical requirements into practical, repeatable processes while responding quickly to production challenges. Why work at MCC: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance, and 401(k) Paid Holidays: New Year's, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Key Responsibilities: Job Onboarding: Lead the introduction of new products or jobs into production, ensuring readiness and alignment with plant capabilities. Training & Support: Develop and deliver training for floor personnel on new processes, equipment, and best practices. Process Validation: Confirm that R\&D handoffs are feasible and sustainable for long-term production. Technical Support: Provide proactive and reactive support to operators, ensuring products remain in spec and resolving issues quickly. Documentation & Standards: Create and maintain detailed process documentation, SOPs, and quality standards. Trials & Testing: Plan and execute trials to validate processes, troubleshoot issues, and optimize performance; conduct lab evaluations and comparative analysis with competitive products. Continuous Improvement: Identify opportunities to streamline workflows and enhance efficiency in label manufacturing and related operations. Customer Interaction: Support customer and MCC-sponsored new product development projects; participate in coater trials and customer visits, occasionally requiring on-site work across shifts. Quality Oversight: Maintain lab/testing equipment and calibrations; initiate raw material complaints (SNAR), track corrective actions, and manage quality holds. Qualifications: Bachelor's degree in engineering or related field (or equivalent experience); 2- or 4-year degree or 2-4 years of related experience/training acceptable. Experience in manufacturing environments, preferably in labels or similar industries. Strong problem-solving skills and ability to manage multiple priorities. Math skills (including Algebra) and knowledge of printing/converting materials and technologies. Excellent communication and training skills; ability to write reports, business correspondence, and procedure manuals. Ability to travel for internal and customer visits and trials. Other Considerations: Occasional lifting of rolls/samples up to 40-45 lbs. Work around coating and slitting equipment; safety shoes may be required. Professional attire for customer visits; flexible hours for multi-shift coverage #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Perform preventative maintenance within DOT standards. Receive road calls, assign third party vendor, and work with business partners on plan of action. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and certificates. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: Vendor service providers when required WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting competency relating to equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Prior experience in administering appropriate PM program. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING N/A LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class-A CDL license and DOT certification Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $33-$36per hour. This role will also receive overtime compensation Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Employment Status: Hourly Full-Time Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Header Join the manufacturing team people don't want to leave. Work where you're valued - low turnover, high satisfaction! We strive to make work fun while meeting our customers' expectations with quality and safety as top priority. We offer a competitive benefits package that includes PTO, paid holidays, 401(k) matching, HSA, medical, dental, and vision insurance as well as tuition reimbursement and loan repayment programs. We also offer a pay progression scale that allows you to grow your knowledge and your pay! We pride ourselves on the tenure of our workforce. Come see why we are the place people stay and grow! Summary of the Position Work is performed onsite in Carthage, TN. This is an hourly entry level production manufacturing position and relocation is not available. Work environment is not temperature controlled. Position Hours: 2nd shift - 4:30pm - 3:00am Monday - Thursday. (2nd shift receives a 10% shift premium.) Overtime varies for Friday and Saturday and may be mandatory. (Overtime is currently mandatory for Fridays and some Saturdays.) Job Responsibilities Summary of the Position This position is responsible for the preparation and brazing of fabricated tube assemblies, including complex braze processes as described below. Key Deliverables Works safely and supports safety within their team and across the organization. This position is responsible for the preparation and brazing of fabricated tube assemblies. Key Responsibilities/Essential Functions Set-up and assembly of parts for brazing operation Brazing tubes to customer specification using a brazing torch and applicable alloys and flux products Inspect all work by ensuring the product is brazed to quality standards and free of leaks and other abnormalities Work with quality control inspector on parts that do not meet leak test and inspection standards Maintain a safe work area by working safely, following safety guidelines, and wearing required personal protective equipment Perform any other job responsibilities directed by management as business dictates Job Requirements Education and/or Experience Preferred - High school diploma or general education degree (GED) Core Competencies Required Maintains a Customer Focus Takes Ownership Is a Team Player Uses Sound Judgment / Integrity Achieves Quality Results Takes Ownership Key Knowledge, Skills, Abilities, and Qualities Required Language Skills - Ability to read and interpret documents such as safety rules, blueprints, operating and maintenance instructions, and procedure manuals. Mathematical Skills - Ability to read measuring scales and tape measure. Ability to apply concepts of basic math including angels. Reasoning Ability - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands of Position Sitting or standing for a 10-hour work day as job dictates, with occasional overtime Heavy or constant visual attention that is required when performing job Ability to lift 35 pounds frequently and up to 50 pounds team lifting, raising or lowering an object from one level to another, including upward pulling Ability to handle job materials, sizing, holding, grasping, turning, or otherwise working with the hands Heavy or constant visual attention that is required when performing job Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Employment Status: Hourly Full-Time Function: Manufacturing Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Header Join the manufacturing team people don't want to leave. Work where you're valued - low turnover, high satisfaction! We strive to make work fun while meeting our customers' expectations with quality and safety as top priority. We offer a competitive benefits package that includes PTO, paid holidays, 401(k) matching, HSA, medical, dental, and vision insurance as well as tuition reimbursement and loan repayment programs. We also offer a pay progression scale that allows you to grow your knowledge and your pay! We pride ourselves on the tenure of our workforce. Come see why we are the place people stay and grow! Job Responsibilities Summary of the Position This position is responsible for receiving products from outside suppliers and processing the transfer of finished goods to the distribution center. Packs transfer product as required, and puts away received items. Key Deliverables Verifies quantity of received items Entering packing slips information into internal system and SAP Puts all received product into the correct rack and bin locations Correcting received quantity errors Transfer finished good to distribution center Key Accountability Metrics Receiving errors Accurately following all PCP plan Timely entry of all finished and received goods Area organized using 6S principles Key Responsibilities/Essential Functions Follow Safety Regulations Works safely and supports safety within their team across the organization - as required. Participates in safety training and demonstrates a high regard for safety at all times. Wears personal protection equipment as required by safety regulations. Receives products from outside suppliers Receives product from outside suppliers. Verifies count per packing slip Scans receipts into internal system Posts receipts to correct purchase orders in SAP system Works with various departments to resolve receipt problems Puts received product into correct rack/bin locations Notifies managers and employees of products received Processes transfer of product to distribution center Ensure all quantities and part numbers match work orders to be transferred Scans and sends transfer items to the warehouse - moves all items in SAP Packs all transferred items in the correct shipping containers per product specifications Supports Department and Company Initiatives Works on cost savings projects and Six Sigma projects and provides support for other team members and projects. Attends team meetings. Utilizes lean tools: 6S, visual factory concepts in maintaining order and cleanliness. Performs additional tasks to support production as needed or directed by supervisor or management. Job Requirements Core Competencies required from Employees Maintains a Customer Focus - Demonstrating exceptional service to both internal and external customers giving high priority to understanding and satisfying the customer. Takes Ownership - Demonstrates a continuous drive to achieve superior results and takes responsibility for those results. Is a Team Player - Has the ability to collaborate effectively with others to achieve common goals. Recognizes situations in which team members need to work together to solve work tasks at hand. Uses Sound Judgment / Integrity - Takes action that is well-reasoned, which represents the best interest of the business. Achieves Quality Results - Flawlessly executes on objectives to ensure the long- term success of the organization. Key Knowledge, Skills, Abilities, and Qualities Required Language Skills Good written, oral and interpersonal skills. Ability to read, analyze and interpret written documents. Must speak English and be articulate with phone and computer communications. Mathematical Skills Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to present numbers in graphs and charts. Reasoning Ability The ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. The ability to deal with problems involving a few concrete variables in standardized situations. Other Qualities Demonstrates accuracy, thoroughness, and attention to detail. Ability to perform independently without direct supervision. Demonstrates initiative to resolve issues or improve processes. Good teamwork skills. Able to deal with frequent change, delays, or unexpected events. Basic computer skills to include Microsoft Office products, particularly Word and Excel, as well as SAP. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: The HVAC Maintenance Team Lead 3 will perform Maintenance inspections and ensure all maintenances are completed per the contract/filter belt list. Education and Experience: Universal EPA Certification Minimum of 8+ years of Commercial HVAC Service experience preferred High school diploma or equivalent GED certificate preferred Skills and Abilities: Excellent written communications skills Able to work well with other technicians and tradesman Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chattanooga Employment Status: Salary Full-Time Function: Engineering Pay Range: ($74,603.39 - $106,576.28) Target Bonus: 8.0% Req ID: 27551 Summary Lincoln Electric Automation is seeking a Mechanical Design Engineer for our Chattanooga, TN location. As a Mechanical Design Engineer, you will focus on conceptualizing and detailing innovative automation systems including robotic work cells, tooling, and precision positioning equipment. Using advanced 3D CAD platforms (ProE/Creo, SolidWorks - preferred), you'll take ownership of mechanical design from concept through build, testing, and service support. This position involves heavy mechanical engineering design work to create custom tooling and fixtures. In addition to competitive pay, Lincoln Electric offers an annual bonus plan, tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do Lead the mechanical design of custom automation systems, often managing one (1) complex project at a time. Develop and document 3D mechanical designs using CAD software such as SolidWorks. Perform engineering calculations (static and dynamic systems) to ensure mechanical performance and safety. Collaborate with cross-functional teams-including fabrication, machine build, controls, and project management-throughout the project lifecycle. Provide technical drawings, mechanical layouts, and detailed part documentation to support production and procurement. Interact with customers regularly during design and development to ensure alignment with technical requirements and expectations. Ensure that mechanical designs meet all project specifications, quotations, and purchase order terms. Take ownership of small-scale projects as Engineering Lead, Designer, and Detailer. Support Estimating, Sales, Production, and Service departments with technical insight and collaborative problem-solving. Proactively manage timelines and to meet project schedules in a fast-paced environment (typical duration: 4-8 weeks). Required Experience & Skills 2+ years of mechanical design engineering experience Industrial automation or custom equipment development industry experience preferred. Associate or Bachelor's degree in Mechanical Engineering, Mechanical Design, or related field preferred but not required. Proficiency with 3D CAD software (ProE/Creo and/or SolidWorks required). Solid understanding of mechanical principles, fabrication methods, and materials. Basic knowledge of electrical, pneumatic, and robotic system integration is a plus. Strong mechanical aptitude with a hands-on approach to problem-solving. Experience in customer-facing technical roles and project collaboration is desirable. Proficiency in Microsoft Office tools (Word, Excel); experience with project management software is a plus. Ability to adapt to shifting priorities, solve complex design challenges, and deliver results under tight timelines. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Details Troubleshoot, repair, maintain, and install HVAC and related equipment as assigned. Assume day to day coordination of specific agreements or projects as assigned to ensure contractual commitments are met in a timely, cost effective manner Responsibilities Use expert technical & troubleshooting knowledge to assist other service representatives in solving problems. Demonstrate capability and interest in training others. Can be relied on to train service technicians and trainees. Teach other technicians how to solve problems without solving the problem for them. Keep technical knowledge up to date regarding equipment and concepts. When presented with a problem, know what to do, and why, and whether to repair or replace. Search out and read applicable manuals and online sources. Belong to and take advantage of technical organizations to improve technical knowledge. Demonstrate capability of a handling heavy workload of calls Upon receiving a customer complaint, follow systematic questioning techniques and relate answers to the functioning of the system. Follow point-by-point troubleshooting guides to find faults in a short period of time. Avoid needless callbacks by checking complete system before leaving the job. Check safety and limit controls for proper setting before leaving the job. When faced with a seemingly unsolvable problem, seek out help and solve the problem before leaving. Use proper tools and instruments for troubleshooting. Inform customer when arriving at or leaving the job and when planning to return. Explore a customer complaint to determine the real problem. Respond to customer complaints with the proper amount of sympathy and empathy. When the problem is caused by the customer's use of the system (rather than a fault of the system), tactfully instruct the customer on proper use of the system. Give assurance to customer that the problem is fixed; explaining cause and remedy; and if problem has not been fixed offer explanation of situation and suggest next step. Demonstrate ability to accurately determine job priorities by: Adhering to planned call schedule Scheduling report time concurrent with jobs Handling interruptions in stride Having the proper tools, materials, and scheduled tasking when arriving at the job site Scheduling maintenance of vehicle Plan project work to ensure service representatives and material are on the job at the right time Promptly and accurately complete all required paperwork. Obtain customer signature on all service reports (before work begins when performing spot). Keep manager informed of unfavorable news, changes made, or disenchantment with price increases by customers. Communicate information to all parties who would benefit from it. Modify instructions to create understanding in all levels of people regardless of their technical knowledge. Instruct customer's personnel to the point that they can handle emergencies by themselves and know when to call for service. Recognize what has to be taught to customers and take required time to do so. Provide sales with qualified leads. Alert sales about competitive sales efforts. Provide Spot opportunities to meet Operational team goals. Determine who in the customer's organization is responsible for the mechanical system being serviced. Persuade customer to replace obsolete systems and makes recommendations. Assist Sales in pricing agreements and projects. Provide support for any special projects as assigned by your manager. These special projects, at the determination of your manager, may or may not become part of this position's primary responsibilities. When the Supervisor is present, the lead worker may also be responsible for directing smaller work groups While disciplinary authority is not given to this position, it is expected that the Lead will report performance issues to the Supervisor. Qualifications Must be 18 years of age or older. Must meet all requirements to receive approval for working in specific ATS environments (if applicable), ten-year work history if available Preferred Qualifications Customer Service Experience One year of lead or supervisory experience 2 yrs of commercial HVAC experience #P1 #200 About Us ABM (NYSE: ABM) is one of the world's largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM's comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries - from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit ******************* ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call ************. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you'll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you're looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at ******************* ABM does not accept unsolicited resumes.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chattanooga Employment Status: Salary Full-Time Function: Engineering Pay Range: ($74,603.39 - $107,000.49) Target Bonus: 8.0% Req ID: 27572 Summary Lincoln Electric Automation is seeking an Integration Engineer to join our team in Chattanooga, TN location. As an Integration Engineer, you'll play a key role in designing, developing, and refining automated welding systems that drive our customers' success. This position serves as bridge between Mechanical Design, Manufacturing Engineering, and our customers, ensuring that every automation solution meets the highest standards of performance, reliability, and innovation. Using your expertise in robotic programming, system integration, and simulation software, you'll bring complex automation concepts to life-transforming advanced designs into world-class, production-ready systems. In addition to competitive pay, Lincoln Electric offers an annual bonus plan, tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You'll Do Automation & Integration Program, integrate, and debug robotic and PLC systems for automated welding and assembly equipment. Conduct offline robot programming, reach studies, and layout simulations using Cimstation, RoboGuide, RobotStudio, and Motosim. Utilize CAD modeling tools (such as Creo) to develop and modify part designs, tooling, and layouts. Support the installation, setup, safety validation, and qualification of automation systems prior to production release. Process Improvement & Technical Support Identify opportunities to improve product quality, process efficiency, and cost-effectiveness. Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods. Troubleshoot design, material, or process issues in both new and existing systems. Incorporate new technologies, methods, and materials to improve operations and manufacturing performance. Provide technical support to production teams across shifts, resolving complex equipment and process issues. Project Management & Collaboration Partner with design, manufacturing, and project management teams to ensure seamless integration and execution. Lead or support major automation projects, including new equipment launches and technology demonstrations. Work with vendors, contractors, and corporate engineering teams to deliver high-quality solutions on time and within budget. Leadership, Training & Continuous Improvement Mentor and train junior engineers and technicians in robotics, integration, and system troubleshooting. Support apprenticeship and RIA certification programs, as well as facility tours and recruitment efforts. Participate in integration and tooling audits, maintaining documentation and driving continuous improvement in programming and integration practices. Required Experience & Education Education: Bachelor's degree in Engineering or related technical field (or equivalent experience). Experience: Hands-on experience in a mechanical, manufacturing, or automation environment. Proficiency in robotic programming and simulation tools (Fanuc, ABB, Yaskawa, etc.). Knowledge of manufacturing processes, tooling, and system integration. CAD proficiency (preferably Creo). Complies with ISO 14001, and other relevant standards. Support, implement and understand the intent of the EMS policy. Participates with ISO-14001 as required. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

New Hire Incentive Bonus! UniFirst's Norfolk, VA location is now offering an incentive bonus for $2,000 new hires. The following guidelines must be met to be eligible: New hire must reach 90 days of employment to receive the full incentive bonus. New hire must abide by UniFirst's 90-Day Probationary Period. This includes meeting UniFirst's attendance and performance policy. New hire must not have been previously employed by UniFirst. Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Values & Innovation At Under Armour, we are committed to empowering those who strive for more, and the company's values - Act Sustainably, Celebrate the Wins, Fight on Together, Love Athletes and Stand for Equality - serve as both a roadmap for our teams and the qualities expected of every teammate. Our Values define and unite us, the beliefs that are the red thread that connects everyone at Under Armour. Our values are rallying cries, reminding us why we're here, and fueling everything we do. Our pursuit of better begins with innovation and with our team's mission of being the best. With us, you get the freedom to go further - no matter your role. That means developing, delivering, and selling the state-of-the-art products and digital tools that make top performers even better. Purpose of Role Step up. Lead the floor As a Sales Keyholder, you're the right hand to our store leaders - driving sales, coaching teammates, and keeping energy high. It's the perfect first step into leadership for someone whose ready to take charge, inspire others, and make every shift count. Your Impact We count on our Sales Keyholders to: Ensure all teammates provide great customer service Lead a selling culture and enhance the customer experience Recognize and reward performance Coach, train, and support teammates Manage loss prevention, safety, and audit expectations and results Ensure the store is neat, clean, and well-stocked Open and close the store when necessary Support in driving sales and retail/omni KPI target achievement Act as the leader on duty and consistently models the brand's Athlete service standards and selling behaviors Provide in-depth information related to a wide portfolio of technical products Partner with rest of store leadership in maintaining standards covering merchandise and floor sets Evaluate store sales and payroll goals using payroll reports and tools; make scheduling adjustments to meet business needs. Build Athlete loyalty through in-store experience, using various available applications Effectively communicate with athletes, teammates, and leadership Assume Stock Keyholder responsibilities as necessary Perform other tasks as assigned by management Requirements To be considered for this role, you must meet these minimum requirements: At least 18 years old High school degree or equivalent 1+ year of retail/customer service experience Local language fluency required; basic English is a plus Available to work a flexible schedule; including evenings, weekends, and holidays Knowledgeable of store operations, visual merchandising, stockroom, risk management & safety Moderate knowledge of industry/retail operations and applying this knowledge to create solutions Advanced selling experience and comprehensive industry understanding Ability to bend, squat, reach, climb a ladder and stand for extended periods of time with or without reasonable accommodation Comfortable with or willingness to learn technology (such as hand-held and mobile devices) Strong communication skills Can stand, walk, bend and lift cartons weighing up to 25 lbs./ 12kgs during each work shift with or without accommodation Benefits & Perks Perks & benefits our Part-Time Associates receive: Generous employee discount Ability to participate in special contests with the opportunity to win merchandise and other exclusive prizes Work-Life Assistance Program to support health, personal, family or work-related challenges High-energy environment, working alongside people who appreciate the power of a team Opportunities for professional development and advancement $18.50-$20.80 USD Our Commitment to Equal Opportunity At Under Armour, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion or belief, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, family or paternal status and any other characteristic protected by applicable law. Under Armour seeks to recruit, develop and retain the most talented people representing a wide variety of backgrounds and perspectives. If a reasonable accommodation is needed to participate in the job application or interview process, please contact our Human Resources team via candidateaccommodations@underarmour.com.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Chattanooga Req ID: 27857 Pay Range: $23.41 / hr - $38.46 / hr Bonus: 5% Summary Lincoln Electric Automation is seeking a Controls Design Engineer to design, develop, and implement electrical and automation systems for integrated tooling and advanced manufacturing equipment. This role focuses on control system architecture, hardware specification, PLC/HMI programming, and ensuring compliance with industry safety and quality standards. This is an on-site position located in our Chattanooga, TN plant. In addition to competitive pay, Lincoln Electric offers bonus compensation, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits! Responsibilities Develop electrical control system architectures, including schematics, wiring diagrams, and panel layouts. Specify, select, and integrate automation components such as PLCs, HMIs, servo drives, VFDs, sensors, actuators, and safety devices. Program PLCs, HMIs, and other control devices to implement control algorithms and logic Collaborate with mechanical, robotics, and fabrication teams to ensure system designs align with project objectives and customer specifications. Perform system testing and troubleshooting to ensure proper functionality. Produce technical documentation per standards and ISO 9001 processes, including design packages, test plans, and revision records. Maintain working knowledge of emerging automation technologies and relevant safety standards. Required Education & Experience Bachelor's degree in Electrical Engineering, Controls Engineering, or related field; equivalent experience considered. 3+ years of experience designing industrial control systems or automated machinery. Proficiency with AutoCAD Electrical or EPLAN for schematic and panel design. Solid understanding of AC/DC power distribution, motor control, motion systems, pneumatics, and industrial networking protocols. Experience with robotics integration, welding automation (arc, laser, resistance), or machine tooling systems preferred. Strong troubleshooting, analytical, and system-level problem-solving skills. Ability to manage multiple projects and adapt to changing priorities in a dynamic engineering environment. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: Responsible for performing maintenance and service for our commercial HVAC customers, utilizing our technology, technical capability, and exceptional customer service to provide customer-first solutions. Education and Experience: Universal EPA Certification Minimum of 8+ years of Commercial HVAC Service experience preferred High school diploma or equivalent GED certificate preferred Skills and Abilities: Excellent written communications skills Able to work well with other technicians and tradesman Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this role, you will provide in-store merchandising support to Retailers to meet shoppers' needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. This is a traveling position that requires regular travel as a primary requirement of the role. Travel roles may require various degrees of travel up to 50% or more of the time. Are you ready to shape the future of shopping and get it done with us? What we offer: Competitive wages; $18.75 per hour Growth opportunities abound - We promote from within Paid travel with overnight stays No prior experience is required as we provide training and team support to help you succeed Additional hours may be available upon request We offer benefits that can be customized to meet your family's needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate Perks Now, about you: Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing manner You're 18 years or older Can perform physical work of moving, bending, standing and can lift up to 50 lbs. Have reliable transportation to and from work location Demonstrate excellent customer service and interpersonal skills with our clients, customers and team members Interested in traveling within and outside of your home state, with overnight hotel stays Are a motivated self-starter with a strong bias for action and results Work independently, but also possess successful team building skills Have the ability to perform job duties with a safety-first mentality in a retail environment If this sounds like you, we can't wait to learn more about you. Apply Now!

Summary of Job: This position is responsible for performing project installation for our residential plumbing customers. Education and Experience: High school diploma or equivalent GED certificate preferred Minimum 5 years of experience preferred in a combination of plumbing install and/or service Valid driver's license with a good driving record Skills and Abilities: Install tankless with hydronic heating system Pro press copper connections Relocate tankless and install recirculation Lead more than one crew on a job to help it go efficiently Operate pipe bursting equipment Operate mini excavator Install whole house reverse osmosis system Slab drain re-pipe Troubleshoot tankless malfunctions Run electrical circuit Troubleshoot faucet repairs Install roof boot for venting Excellent communication and customer service Company Perks & Benefits Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer . Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Bishop-Wisecarver is looking for a Global Supply Chain Manager to lead our global sourcing, procurement, logistics, and warehouse operations. In this strategic role, you'll shape the long-term supply chain roadmap for a diverse industrial automation portfolio and ensure materials are delivered reliably, cost-effectively, and in full compliance. You'll lead a talented team, strengthen supplier partnerships, and drive operational excellence across the end-to-end supply chain. Note: This is mainly an onsite role in the San Francisco Bay Area. To learn more about BW, please visit us at: ******************** What You'll Lead Global sourcing strategy across metals, machined parts, electromechanical components, and electronic devices Supplier negotiations, contracting, KPIs, and long-term performance management Procurement, materials planning, MRP execution, and S&OP alignment Logistics, freight optimization, 3PL partnerships, and customs compliance Warehouse operations, inventory accuracy programs, and OSHA-aligned safety ERP/data governance, digital tool improvements, dashboards, automation, and supply chain analytics Cross-functional initiatives in cost optimization, business continuity, and continuous improvement What You Bring 7+ years of progressive global supply chain or sourcing leadership Experience managing multi-disciplinary teams (buyers, planners, warehouse) Strong knowledge of metals sourcing, machining, and electromechanical/automation supply chains International supplier negotiation experience Familiarity with ITAR/EAR, RoHS/REACH, CoO, conflict minerals Strong ERP/MRP skills and data-driven decision making Preferred: APICS CSCP/CPIM, CI/Lean background, regulated industry experience, warehouse or digital transformation experience. Why Join Us You'll influence strategy, build systems that scale, and create a resilient supply chain that fuels innovation and customer success. If you're a hands-on, forward-thinking supply chain leader ready to make a big impact-we'd love to meet you.

Since 1995, Red Oak Technologies has been a trusted partner in the tech industry, delivering innovative talent solutions that drive progress. We specialize in quickly acquiring and efficiently matching top-tier professional talent with clients in immediate need of highly skilled contract, permanent or project management based resources. “NOTE: If selected for this position, you are required to perform ALL work onsite” Food Product Evaluator II Dublin, CA KEY RESPONSIBILITIES: •New Product Development Projects - Assist Product Development Managers by managing documentation and new food product demonstrations across multiple categories. Receive, log, label, and store food product sample submissions. Maintain inventory management system of product samples. •Plan set-up, clean-up, and assist with product evaluations/cuttings, as assigned, and participate in cuttings and evaluate the organoleptic quality of products, as required. Create and distribute demonstration reports to cross-functional team. •Execute product sample testing, as appropriate per category (ex: pH, viscosity, texture analyzer, etc.). Perform other duties, as assigned by supervisor. •Finished Product Specifications - Create, update, review and manage product files for finished product specifications in our internal specifications database system, including NLEA and ingredient statements, based on input and collaboration with supervisor, supplier, and cross-functional team members, as appropriate. Route specifications for approval. Qualifications: •Degree in Food Science, Chemical Engineering or a similar discipline preferred. •At least 3 years' experience in a lab, manufacturing, or production facility plus the education listed above. •Thorough knowledge of food manufacturing equipment, food preparation, ingredient functionality, product formulations, and sensory evaluation procedures. •Thorough understanding of food safety and microbiology. Working knowledge of packaging technology to evaluate adequacy of packaging. •Able to operate simple chemical and analytical tools and laboratory equipment (refractometer, pH meter, simple titrations, and various measuring devices.) •Excellent time management skills, sense of urgency and desire to complete all assignments on a timely basis. Travel: • Less than 10%

Benefits/Perks Flexible Schedule Competitive Pay Career Advancement We're looking to hire a hard-working, dependable, and dedicated Cleaning Tech 1 who can maintain the cleanliness and safety of our building. You'll be responsible for cleaning floors, walls, and surfaces, disposing of garbage, performing routine maintenance, inspecting premises, using specialist cleaning machinery. In addition to maintenance tasks, you will be responsible for other light duty task such as changing lightbulbs etc. The ideal candidate has a great work ethic, Integrity and experience with cleaning equipment and supplies. Responsibilities · Communicate (written or verbal) with internal and external shareholders issues. · Clean building floors by sweeping, mopping, scrubbing, or vacuuming. · Clean mirrors and surfaces · Clean and supply restrooms · Remove waste and empty trash. · Maintain cleaning chart indicating areas that were cleaned and inspected. · Replenish cleaning and maintenance supplies. · Organize janitorial storage areas. · Notify supervisors about unsafe conditions or concerning the need for repairs or maintenance. Qualifications At least 1 years of experience in janitorial services Driver's license or reliable transportation to and from the worksite Experience with a variety of cleaning supplies and cleaning equipment Excellent stamina and physical health Must be a hard worker with high attention to detail and have a strong work ethic View all jobs at this company