Welder fitter jobs in Pensacola, FL - 554 jobs

Selects type and size of pipe or other related materials and equipment according to specifications. Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. Lays out, positions, aligns and fits components together in various body positions. Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. Capable of producing welds that will meet NDE (non destructive examination) requirements Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy.

Venture Dynamics Gulf, Inc. is currently hiring 1st class Pipe Fitters and Pipe Welders for a long-term project in Mobile, AL. You must have the following experience: 3+ years of proven production experience and ability to work with limited supervision. Have shipyard experience Able to pass test: Crop/ Cut out a piece of plate. Prep it/bevel it then refit and tack it up. All craftworkers will have to complete a shipyard physical fitness test and drug screen. Job Type: Full-time Pay: $27.00-$38.00 per hour Expected hours: 40-55 per week Schedule: 8-10 hour shift Day shift Monday to Friday Night shift Overtime Ability to Relocate: Mobile, AL: Relocate before starting work (Required) Work Location: In person View all jobs at this company

Long Term Maintenance - No Per Diem Work Hours Mon - Thurs 7:00AM - 3:30PM Must pass pre-employment physical and background Must pass welding test Job Requirements: AWS certified welder. Required site specific welding test for Mig and Tig SUMMARY Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. - May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. - May repair broken or cracked parts and fill holes. - May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. - May preheat work piece, using hand torch or heating furnace. - May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

**Now paying up to $33.36 / hr** REPORTS TO: Supervisor - reports to and takes direction from a Pipe Supervisor on a daily basis OVERALL PURPOSE OF JOB: To work within a team of Pipe Fitters and welders to achieve maximum production in minimum time, standards and quality in keeping with company policies, while maintaining a positive and motivated team environment. SUMMARY: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the minimum knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and the ability to follow directions. The individual must possess experience in the trade and knowledge of ship terminology. The individual must demonstrate ability to interpret job specifications and perform work on marine vessels. Must be able to follow directions and work with limited supervision. Also, must be willing to develop other team members' skill level. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include but are not limited to the following: Read and interpret basic drawings and weld symbols. Pass weld test for all Austal USA weld procedures in the 6GR position Pass Austal USA TIG weld test procedure for aluminum pipe Work to Austal housekeeping procedure Inspection of work, identification of potential problems, initiation of corrective actions. Increase awareness of Quality procedures within department Perform as a productive working team member that meets daily goals set by the supervisor. Continuously improve communications and flexibility within the team. Help build the team environment. Build pride of workmanship and quality through on job training. Contribute towards innovation / productivity improvements. Assist in the control of waste elimination, e.g. materials, consumables etc. Assist supervisor to maintain control of department equipment and its maintenance. Must have full set of personal tools Work towards the team goal of delivering the vessel on time. Always be ready to start shift on time Follow Austal guidelines and procedures Do not leave job early or return late from break times Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage Must be available to work overtime to support company needs EDUCATION and/or EXPERIENCE 1 year minimum work experience as a B-class pipe welder at Austal or 2 years experience in similar role at comparative employer. Ability to pass “A Class” skills validation test to demonstrate welding ability for restricted open root welds Ability to successfully complete onboarding procedures in preparation to pass 6GR weld qualification test requirements for copper nickel, carbon steel and stainless steel to meet contract requirements for A Class welding on the vessel LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. MATHEMATICAL SKILLS Ability to add, subtract, multiply, divide, and measure using the metric system. REASONING ABILITY Ability to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems that may arise in certain situations. LIAISES WITH Supervisors Foremen PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit. Specific physical requirements include but are not limited to the following: Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing. Ability to turn head from side to side and about the vertical axis. Lift/push/pull 50lbs on an occasional basis. Lift/push/pull up to 20lbs on a frequent basis. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts. Able to work at a variety of levels (ex. waist, eye, overhead). Demonstrate the ability to safely and appropriately use required tools and equipment. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. Possess sufficient handgrip and coordination to carry and operate tools and equipment. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. Ability to withstand cold and hot temperatures. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time within OSHA guidelines. Able to respond to verbal and audible sounds/commands. Able to utilize adequate visual skills. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to humid conditions, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud. PPE available and MUST be used correctly. SAFETY Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks. Equal Employment Commitment Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: ************. Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

CAREER OPPORTUNITY Job Title: Welder and Fabricator II Reports To: Welder and Fabricator III Pay: $25.00 to $30.00 ABOUT FRONTIER TECHNOLOGIES: With two locations in Brewton, AL and Theodore, AL, Frontier Technologies specialize in Energy, Services, Engineering, and Logistics providing quality components and services to our customers that encompass fabrications, assemblies, subtractive manufacturing and the rework, repair, or refurbishment of a wide range of A-C Components items including in-house testing and engineering evaluations. Frontier Technologies is now part of Gexpro Services, a world-class Supply Chain Services outsource provider, specializing in developing and managing production inventory management programs. Benefits Competitive compensation Company Paid Life and AD&D Insurance Short Term and Long-Term Disability Various Medical, dental, vision plans to best suit your needs. Flexible Spending Accounts and Health Savings Accounts Voluntary benefits that include critical illness, hospital indemnity, accident, discounts on pet, home, and car insurance Employee assistance program and Health wellness programs 401(k) immediately with a competitive match Several paid holidays and paid time off that includes personal, sick and vacation time. Welder and Fabricator II Overview Welder and Fabricator II position is responsible for assembling metal structures through the use of cutting, joining, fabricating, and shaping metal and other materials using high heat and a range of tools. Welder II will use MIG, Flux Core, and TIG welding to produce and manufacture parts and fixtures. The Welder II will report to a Welder and Fabricator III. Perform welding tasks using various techniques such as MIG, TIG, and Flux Core Welding. Read, interpret, and follow complex blueprints, diagrams, engineering drawings, specifications, weld symbols, bills of materials, and other written instructions or procedures to accurately create equipment and to determine the appropriate welding process. Inspect completed welds to determine structural soundness through visual inspection. Utilize a variety of handheld tools, such as drills, grinders, tape measures micrometers, calipers, weld gauges and welding hand tools; fit and prep your parts for welding jobs. Measure and cut materials to drawings specifications for Frontier projects and customer orders. Create specific weldment set-ups and fixturing to hold production parts with tolerance and specifications. Advanced fabrication skills to be able to assemble and weld parts to hold tolerance and have an expectation of how welding can manipulate assembly. Set-up welding machines to the correct settings for the type of material and weldments needed. Maintain weld machines using preventative maintenance methods. Perform quality work checks to ensure the product meets quality standards, within tolerance, and identify product defects. Repair welded parts and products to fix customer issues. Maintain a safe, clean, and orderly work area. Follow Company Policies and Procedures as well as OSHA Guidelines and use proper PPE. Follow work instructions throughout the process, completing assigned tasks for projects. Complete required paperwork for each job accurately and on a timely basis. Ability to work overtime on a very short notice to meet customer demands. Move material with a pallet jack, forklift or overhead crane. Collaborate with Quality Department to ensure customer and safety specifications are met. Certified in Visual Testing Level 1 will be provided by the company. Other job duties as directed by Welder and Fabricator III or Engineering Department. Qualifications Possess a High School Diploma or equivalent, certification or technical school in Welding preferred 3-5 years of experience in MIG and Flux Core, 2-4 years of TIG Welding. Advanced Mechanical Aptitude Able to read and interpret work instructions Fluent in both written and spoken English Perform advanced Math skills standard using and metric measurements Able to accurately read/use a tape measure, calipers and micrometers Basic computer skills Passion for doing a job well A “self-motivated” team player Able to work effectively in South Alabama climate conditions Able to stand for long periods of time, crawl, squat, and climb without tiring easily Able to lift 50 pounds with reasonable accommodations Pass visual acuity test Must pass a background check and drug test DISCLAIMER: The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Gexpro Services (A VEVRAA Federal Contractor) is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. Turner Industries Group, LLC has an opening for a Pipe Welder to join our Team in the Decatur, AL area. The Pipe Welder will be responsible for lay outs, fits, and welds fabricated, cast, and forged components to assemble structural forms, such as tanks, pressure vessels, furnace shells, pipe, building, and bridge parts. Qualification Standards: ● High school or equivalent ● Minimum four (4) years of experience in specified skill ● Must be able to pass a weld test before being hired ● Must be certified as a welder ● Written pre-employment qualification test ● Post-offer drug/alcohol screen and physical evaluation ● Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) ● Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) ● Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Selects equipment and plans layout, assembly and welding; lays out, positions, aligns and fits components together; bolts, clamps, tack welds parts to secure in position for welding; sets up equipment and welds parts; may assemble parts by bolting and riveting; may weld pipe such as carbon steel, stainless steel, chrome, etc. by process of arc, heliarc, gas, mig, tig, etc.; may weld pipe, sheet metal, structural steel, brackets or other materials; may repair products by dismantling, straightening, reshaping and reassembling parts; may use cutting torch to cut materials and demo existing assemblies. Compensation: Final agreed upon compensation is based upon individual qualifications and experience. Benefits: Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction. Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.

Now Hiring DAY SHIFT WELDER's with Fabrication & ALUMINUM experience, to work at a fast paced Cable Manufacturing Company in Milton, FL. Our company is fast-expanding, future looking, and a continuous innovator across the energy market. We provide integral components for solar and wind farm development as well as electrical cabling for key industrial markets including the Oil & Gas, Communications and Irrigation markets. Within this fast-paced culture, we take a service-oriented approach to all of our work, by utilizing a friendly working environment. We truly believe that our company is a rewarding career destination. We are looking for a skilled WELDER to cut and join metals (and other materials) at our facilities and/or at our construction sites. We are seeking someone who also has experience working with ALUMINUM, and who preferably also has FABRICATION experience. You will operate appropriate equipment to put together mechanical structures or parts with a great deal of precision. Your job is important as it provides the foundation for strong infrastructure. A welder must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will also have a steady hand and great attention to detail. Knowledge of different kinds of metal (especially ALUMINUM) and their properties is essential. DUTIES AND RESPONSIBILITIES: Read blueprints and drawings and take or read measurements to plan layout and procedures Determine the appropriate welding equipment or method based on requirements Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) Operate angle grinders to prepare the parts that must be welded Align components using calipers, rulers etc. and clamp pieces Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead) Repair machinery and other components by welding pieces and filling gaps Test and inspect welded surfaces and structure to discover flaws Maintain equipment in a condition that does not compromise safety EDUCATION AND EXPERIENCE: High school Degree (or equivalent) is preferred but NOT required. At least 1 full year of Welding AND Fabricating experience (NOT including time in school) REQUIREMENTS: MUST have TORCH experience in order cut bobbins. MUST have ALUMINUM experience. Proven experience as welder/fabricator with at least 1 full year of welding/fabricating experience (OUTSIDE of a school setting). Experience using a variety of welding equipment and procedures (TIG, MIG, MMA etc.). Experienced in using electrical or manual tools (saws, squares, calipers etc.). Ability to read and interpret technical documents and drawings. Knowledge of relative safety standards AND the willingness to use protective clothing (face-shield, gloves etc.). Comfortable working in both HOT and physically demanding environments. Ability to stand, kneel, or bend for extended periods of time. STRONG "Attention to detail". Proficient in English (extremely beneficial if you ALSO speak Spanish). Successful completion of a relevant apprenticeship program is required. Professional Certification (e.g. an AWS welding certificate) is preferred but NOT required. ADDITIONAL REQUIREMENTS: Must complete a pre-employment background check (having something on your record does NOT eliminate you from this position, we take everything on an individual "case-by-case" basis) MUST be able to pass a pre-employment drug test. MUST have STEEL-TOED boots/shoes. MUST have reliable transportation to Milton FL. PAY: Starts at: $22+/hr. --- Depending on Level of Experience (with the opportunity to increase over-time) ***All hours worked OVER 40 hours WILL be paid at "TIME-AND-A-HALF"*** SCHEDULE: Full-Time --- All shifts are 12-hr's Day Shift = 7:30am - 7:30pm ***Expect to work 60+ hours a week*** Benefits: (that may be available AFTER temp period) 401(k) Dental insurance Employee discount Flexible spending account Health insurance Life insurance Paid time off Vision insurance TEL Staffing complies with regulations enforced by the EEOC. This position is Temp to Hire. No benefits are offered during the Temp period.

Our client is looking for First Class Welders to work at their Jacksonville facility. This is a full-time temp to hire position. Hours: Days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Summary/Objective Capable of performing a variety of welding functions in all positions on structural plate and 6G pipe with SMAW, FCAW and GTAW. Willingness to cross train for multi-function structural and piping assembly processes Essential Functions Fluent in understanding job specific WPS / PQR's and capable of setting machine up for performance in all positions to certified testing criteria. Analyze blueprints for welding insignia and the application thereof to assembly components on piping and structural systems. The ability to identify correctly, measure, hand dress, cut and fit prepare metal surfaces for welding process to be completed per job specific requirements. Capable of visual observation of pre- and post-welded surfaces; and the interpretation of fulfilled job requirements with micrometer, caliper, and other precision measuring instruments. Technically proficient in the interpretation of insufficient weld criteria and knowledge to efficiently blend to repair. Strong mechanical aptitude and problem solver who can understand and follow instruction. Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations. Operate overhead cranes and or forklifts. Complies with all company policies, procedures, and safety requirements and is physically / medically qualified to wear required PPE per OSHA standards. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Competencies Collaboration Skills Reliable Attendance Decision Making Leadership Communication proficiency written and verbal Ethical Conduct. Problem Solving Organizational Skills Thoroughness Time Management Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Required Education and Experience Basic math and language skills required. Experience in threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting. Related experience or training. Preferred Education and Experience 6+ Years' experience in Welding SMAW, FCAW and GTAW, or a combination. 2 years vocational technical training. Additional Eligibility Qualifications Must have dependable transportation, valid driver's license, clean back-ground check and random drug screening consent. Job Type: Full-time Pay: $22.00 - $28.00 per hour Shift: 8-hour shift Day shift Application Question(s): Are you willing to take a drug test? Do you have a clean background, and can we run a background check? Experience: Precision measuring instruments: 6 years (Required) ISO 9001: 3 years (Required) TIG welding: 6 years (Required) Stick welding: 6 years (Required) License/Certification: Driver's License (Required) Ability to Relocate: Jacksonville, FL: Relocate before starting work (Required) Work Location: In person

Labor One is hiring Aluminum Welders for a shipyard in Panama City, FL. Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (850)252-3345 or (251)385-0491 *Please send us a text if we don't answer* Position Summary Lay out, fit, and weld fabricated, cast, and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, and building and bridge parts according to specifications. Select equipment and plans layout, assembly, and welding. Work with other crafts as instructed by supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES MAY INCLUDE THE FOLLOWING: Because the shipyard is continually growing to meet the needs of customers, the essential duties and responsibilities may be different than described. -Regular attendance at work and the ability to work flexible hours, including overtime, weekends, and holidays. -Comply with Company, federal, state, and local safety, ethics, and environmental rules, regulations and policies while performing duties. -Monitor working environment for compliance with quality, safety, environmental, and health regulations. -Weld components in the flat, horizontal, vertical and overhead positions. -Fit, tack and weld component parts in position, and examine welds for adherence to specifications. -Examine weld for bead size and other specifications. -Inspect grooves, angles, or gap allowances, using micrometer, caliper, and precision measuring instruments. -Lay out, position, align, and secure parts and assemble according to specifications. -Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. -Produce high quality welds, including water tight penetrations with a variety of materials including weld steel, stainless, and aluminum. -Work with minimal supervision. -Perform other duties as assigned. SUPERVISORY RESPONSIBILITIES: May indirectly supervise and/or train subordinates. Job Requirements Experience: One to three years' experience as a flux core arc welder desired. Requires working knowledge of materials, methods, and the appropriate work processes and techniques for fitting and welding steel and other materials. Requires knowledge of ship terminology, welding symbols, safety, OSHA, and ABS regulations. Requires experience and knowledge of gouging, mirror welding, mig and stick welding; experience with carbon, stainless steel, and aluminum welding. Must pass ABS American Bureau of Shipping (ABS) welding tests to be ABS Certified. Skills: Ability to read and comprehend written, oral, or diagram forms or plans. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to read and understand blueprints. Knowledge of safe operation and use of hand and power tools. Ability to effectively present information and respond to questions from supervisors and employees. Ability to add, subtract, multiply, and divide in all units of measure. Ability to read a tape measure. Behavioral Attributes: Integrity, ethics, flexibility/adaptability, initiative, interpersonal skills, attention to detail, safety conscious, and multi-tasking. Maintain the confidential integrity of details pertaining to the shipyard. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to communicate. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the workday. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee must be physically and medically qualified to wear all required personal protective equipment, as prescribed under Occupational Safety and Health Administration (OSHA) standards. The employee must be able to work above ground at heights of a minimum of 50 feet aloft and/or working from scaffolding and/or man-lifts while working with machinery; in confined spaces and withstand extreme heat and cold in an outside climate or confined space. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee may be exposed to the risk of electrical shock, moving mechanical parts, vibration, fumes, airborne particles, toxic or caustic chemicals, continual loud noise, and other hazards found in a heavy industrial shipyard environment. Rigorous compliance with safety procedures, policies, and personal safety equipment requirements is therefore mandatory. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

The Pipe Welder Level 3 is a highly skilled welder responsible for executing complex welding tasks on high-pressure piping systems, ensuring precision and adherence to NCCER and industry standards. This role involves mentoring junior welders, troubleshooting fabrication issues, and leading weld quality assurance efforts. Supervisory Responsibilities: May assist in training and mentoring Level 1 and 2 welders. May lead small teams or crews on specific welding assignments. Duties/Responsibilities: Perform high-quality welding on various pipe materials including carbon steel, stainless steel, and exotic alloys. Interpret complex blueprints, P&IDs, and technical specifications. Set up and operate advanced welding equipment for orbital, TIG, and submerged arc welding. Conduct and pass visual and non-destructive testing (NDT) inspections. Maintain detailed weld logs and documentation. Coordinate with engineers and supervisors to resolve design or fabrication issues. Provide leadership to junior welders. Performs other related duties as assigned. Required Skills/Abilities: Mastery of SMAW, GTAW, GMAW, and other advanced welding techniques. Deep understanding of pipe welding codes and standards (e.g., ASME, AWS). Ability to read complex fabrication drawings and schematics. Excellent leadership, communication, and team coordination skills. Precision, efficiency, and attention to safety and detail. Must be able to read and communicate in English to understand technical documents, safety procedures, and instructions relevant to job duties. English proficiency is required due to operational and safety communication needs. Education and Experience: High school diploma or GED . Completion of NCCER Pipe Welding Levels 1, 2, and 3 modules or equivalent. Minimum 3-5 years of pipe welding experience in industrial or commercial settings. NDT qualification or certifications preferred. Physical Requirements: Must be able to lift and move up to 100 pounds. Must be able to work in hot, cold, noisy environments and hazardous materials. Frequent standing, bending, and working in confined spaces. Prolonged periods of standing and working in confined or elevated areas. Strict adherence to safety procedures, PPE usage including welding hood, gloves, and safety boots. CSFCO is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age (40 or older), disability, genetic information, veteran status, or any other protected status under applicable federal, state, or local laws.

TempToFT We are actively seeking Commercial Plumber/Pipe Fitters to add to our team. We have a large job starting mid November in Pensacola, FL. Plumber/Pipe Fitters lay out, fabricates, assembles, installs and maintains piping and piping systems and equipment for steam, hot water, heating, cooling, lubricating, sprinkling and industrial processing systems in a commercial building. Project Focus Areas include: Higher education, k-12, hospitals, hotels, government, other institutional campuses or facilities. Pay Rate Depending on experience - $20-$28 RESPONSIBILITIES: Reads studies and interprets job specifications, plans and blueprints to gain understanding of work to be done. Selects type and size of pipe and related materials needed for each job. Inspects work site to determine presence of obstructions and to make sure holes cut out for pipe will not cause structural weakness. Plans sequence of installation to avoid obstructions and activities of other construction workers. Cuts, grinds, threads and bends pipe according to job specifications. Assembles and installs a variety of metal and non-metal pipe and fittings. Joins pipe and secures to structure with clamps, brackets and hangers. Tests piping system for leaks by increasing pressure in pipes and observing gauges. IDEAL EXPERIENCE & QUALIFICATIONS: A High School Diploma or equivalent and 5 years as a pipe fitter with experience in commercial plumbing; or equivalent combination of education (Technical School) and experience. Uses basic math skills including geometry and trigonometry to make calculations for work. Ability to read and utilize Pipe-fitters Blue Book. This position requires working in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, extreme weather conditions, precarious places, and risk of electrical shock (high voltage). This position is highly physical and requires regular use of hands, fingers, walking, stooping, and kneeling. It requires employees to lift regularly and or move up to 10 pounds, frequently lift and or move up to 50 pounds and occasionally lift and or move more than 50 pounds.

We're looking for Welders with aluminum welding experience who are excited to grow their careers while supporting critical energy infrastructure projects across the U.S. This hands-on field role offers the opportunity to work on a wide variety of job sites, including power plants, hydroelectric dams, and large-scale industrial facilities. You'll focus on systems such as Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers, and will be part of a fast-growing team that takes pride in safety, quality, and craftsmanship. What You'll Do: Weld aluminum components in multiple positions (vertical, horizontal, overhead - 6G test required) Read and interpret construction, welding, and electrical drawings Rig, lift, align, and set electrical bus duct equipment based on plans and specifications Demo, fit, and install new mechanical components as part of system upgrades Maintain tools and welding equipment in a safe, working condition Conduct safety checks and inspections; identify and address wear, defects, and deterioration Operate electrical testing equipment, including Hi-Pot, Ductor, and Megger Work effectively alongside field technicians, project teams, and other trades Complete daily job reports and timesheets Operate company vehicles and follow RMS Energy's safety and driving policies Follow strict safety and PPE usage protocols due to noise, electrical hazards, and elevated work areas Take initiative and work independently with minimal supervision The Experience We're Looking For: 3+ years of aluminum welding experience (MIG required, TIG preferred) Familiarity with medium and high voltage electrical equipment Ability to read and interpret technical drawings and field documentation Knowledge of OSHA safety standards, including PPE use and working at heights Experience with substation construction or electrical bus installation is preferred Proficient in operating forklifts, manlifts, and other field equipment Additional Requirements: Willingness to travel up to 75% across the continental U.S. High school diploma or GED required Valid driver's license Must pass a background check and drug/alcohol screening Legally authorized to work in the United States Available for extended and irregular hours as needed Able to work outdoors in all weather, at heights (100+ ft), in confined spaces, and around high-voltage equipment and heavy machinery Physically capable of lifting 50+ lbs and enduring extended physical activity Requires good vision, hearing, and English proficiency for safe, effective communication in noisy environments Bonus Points for: Completion of a trade school program, technical college, associate degree, or skilled trade certification in welding or a related field is strongly preferred TWIC Card CDL License Prior experience working with Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers Why Join RMS Energy: We're not just another power services company. We're a tight-knit, mission-driven team that values safety, teamwork, innovation, and continuous growth. Competitive Compensation - Overtime potential and merit-based raises Full Benefits - Medical, dental, and vision coverage fully paid for employees, starting the month after hire Steady Employment & Career Growth - Be part of a fast-growing company with promotion potential 401(k) with Company Match - Traditional & Roth options + free investment guidance Top-Tier Equipment - Provided to support you in the field Compensated Travel Time plus Per Diem - Earn while seeing new places Education Support - Paid training, certifications, and industry memberships Generous PTO - Paid vacation, holidays, and sick leave Employee Assistance Program - Legal, financial, and mental wellness support Want to be part of something meaningful? Apply today and join a team where People, Purpose, and Power come together - your future starts here. RMS Energy is an Equal Opportunity Employer. We believe diverse teams drive better outcomes, and we're committed to creating an inclusive environment where all employees feel valued and empowered. For more information about RMS Energy, please visit ******************

St Johns Ship Building, Inc. is a full-service shipbuilding and marine repair company that specializes in new construction and repair of commercial aluminum and steel vessels. Operations are conducted in a storm-protected 100-acre inland campus in the city of Palatka just 30 miles southwest of Jacksonville on the St. Johns River that provides direct access to the Atlantic Ocean. We are committed to providing top quality craftsmanship and personalized service by delivering vessels on time and on budget. Position Summary As an Aluminum Welder, you will use hand-welding or flame-cutting equipment to weld or join metal components, to fill holes, indentations, or seams of fabricated metal products. This position will be responsible for welding components of the ship and completing repairs or new builds on time, to specifications, and within scope of the project. Completes all the required company training and follows all company policies and procedures. Responsibilities Operate safety equipment and use safe work habits. Weld components in flat, vertical, or overhead positions. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Detect faulty operation of equipment or defective materials and notify supervisors. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Lie out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys. Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools. Clean or degrease parts, using wire brushes, portable grinders, or chemical baths. Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. Fill holes and increase the size of metal parts. Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment. Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments. Gouge metals, using the air-arc gouging process. Guide and direct flames or electrodes on or across work pieces to straighten, bend, melt, or build up metal. Preheat work pieces prior to welding or bending, using torches or heating furnaces. Use fire suppression methods in industrial emergencies. Set up and use ladders and scaffolding as necessary to complete work. Hammer out bulges or bends in metal work pieces. Qualifications Six months to one-year related experience Must pass AWS certification within the first 60 days on the job High School Graduate or General Education Degree (GED) Accountability - Ability to accept responsibility and account for his/her actions. Accuracy - Ability to perform work accurately and thoroughly. Autonomy - Ability to work independently with minimal supervision. Detail Oriented - Ability to pay attention to the minute details of a project or task. Organized - Possessing the trait of being organized or following a systematic method of performing a task. Resource Management (People & Equipment) - Ability to obtain and appropriate the proper usage of equipment, facilities, materials, as well as personnel. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Technical Aptitude - Ability to comprehend complex technical topics and specialized information. Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience. Communication, Oral - Ability to communicate effectively with others using the spoken word. Judgment - The ability to formulate a sound decision using the available information. Reliability - The trait of being dependable and trustworthy. What We Have to Offer You Starting pay is $18+ per hour, based on experience. Medical, Dental, and Vision Cost Savings and Worksite Benefits Company paid Medical Gap Insurance Company paid Short Term Disability Company paid Basic Life and AD&D Company Match 401K Paid holidays Personal and Vacation time PHYSICAL DEMANDS Physical Demands Lift/Carry Stand C (Constantly) Walk C (Constantly) Sit O (Occasionally) Handling / Fingering C (Constantly) Reach Outward C (Constantly) Reach Above Shoulder C (Constantly) Climb F (Frequently) Crawl F (Frequently) Squat or Kneel F (Frequently) Bend F (Frequently) 10 lbs or less F (Frequently) 11-20 lbs F (Frequently) 21-50 lbs F (Frequently) 51-100 lbs N (Not Applicable) Over 100 lbs N (Not Applicable) Push/Pull 12 lbs or less F (Frequently) 13-25 lbs F (Frequently) 26-40 lbs F (Frequently) 41-100 lbs F (Frequently) N (Not Applicable) Activity is not applicable to this occupation. O (Occasionally) Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Occupation requires this activity more than 66% of the time (5.5+ hrs/day) Other Physical Requirements Vision (Near, Distance, Peripheral, Depth Perception) Sense of Sound (hear alarms and radios) Sense of Touch Ability to wear Personal Protective Equipment (PPE) (safety glasses, hard hats, steel toed shoes, gloves) WORK ENVIRONMENT Outdoor Environment, Excessive Heat, Excessive Cold St Johns Ship Building is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Here at Alcom we believe in our mission, vision, and values. Mission: To be the most influential partner in the trailer industry. Vision: To become the market leader in innovative, quality transportation solutions through an unmatched commitment to our employees and customers. Values: Customer Focus, Integrity, Problem Solving, Teamwork The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum. Apply in person - 2526 W. New York Ave, Deland, Fl 32720 M-Th 6:00a - 4:30p | Friday Overtime Potential Heath Insurance Dental & Vision Insurance Short-Term & Long-Term Disability Paid Holidays and Paid Vacation Paid Life Insurance 401(K) plan with 4% match FUNCTIONS AND RESPONSIBILITIES: The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum. Reads and follows blueprints and work orders ensuring a quality product that meets customer demands. Welds different facets of a trailer, including but not limited to: tacking, clamping, and welding with proper bead size on bases and cages in accordance with the work order; ensures quality of welds for structural integrity. Obtains raw materials from Material Handlers. Buffs out rough edges using a hand-held power grinder. Notifies supervisor of any mechanical or material issues including but not limited to, defects in material, damage to the trailer, and deviations from work order. Ensures that finished product meets quality expectations. Strives for the highest level of quality and understands the need for continuous improvement; supports the concept of “good enough is never good enough.” Maintains a clean and safe work area; works to minimize scrap, places unused material back in appropriate area, and disposes of waste appropriately. Follows all safety procedures, wears appropriate personal protective equipment (PPE), and reports any accidents or near misses to supervisor immediately. Performs other related duties and assignments as required. Requirements: •Must be able to work quickly without sacrificing quality or safety •Must have a keen understanding of manufacturing processes. •Must be able to measure and cut accurately •Must possess the ability to creatively think and solve problems •Ability to read blueprints and work orders accurately •Ability to work in a fast- paced environment •Strong time management and organizational abilities Alcom USA is proud of its diverse workforce and welcomes employees who speak one or more languages. As a necessity to safely and efficiently perform business operations, employees must be proficient in speaking and understanding English. Alcom will assess the level of fluency required on a job by job basis. Employees must be able to speak and understand English for job related communications and are otherwise welcome to speak their native or other language in the workplace. EOE

Job Purpose Perform necessary fabrications and welding on company equipment and job work orders. As a TEAM Member at CROM, LLC You Will Enjoy Excellent salary and benefits Medical Insurance with company contribution Other Insurance types offered including Dental, STD, LTD, Life and Accident 401(k) program with a corporate match Paid Time Off Structured, solutions-oriented, and professional environment Autonomy and resources to do your job Essential Duties Responsibilities Perform aluminum welding (primarily GMAW welding) to fabricate and repair ladders, handrails, and safety cages. Perform repairs to field and shop materials and equipment as required Provide training to others assigned to aluminum shop. Assist Shop Foreman in maintaining materials inventory. Observe and maintain all safety procedures. Perform other duties as assigned. Read blueprints and drawings and take or read measurements to plan layout and procedures. Determine the appropriate welding equipment or method based on requirements Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements). Operate angle grinders to prepare the parts that must be welded. Align components using calipers, rulers etc. and clamp pieces. Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead). Repair machinery and other components by welding pieces and filling gaps. Test and inspect welded surfaces and structure to discover flaws. Maintain and repair equipment in a condition that does not compromise safety. Perform other duties as assigned including mechanics and machining and be subject to temporary assignment with other supervisors or for field work. Report to work as scheduled by the employer and without excessive absenteeism. Other duties as assigned. Minimum Qualifications HS Diploma or equivalent 2 years welding experience Valid Driver's License Ability to drive a forklift or learn Experience using a variety of welding equipment and procedures (TIG, MMA etc.) Experience in using electrical or manual tools (saws, squares, calipers etc.) Ability to read and interpret technical documents and drawings Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.) Attention to detail Proficient in English Willingness to travel for jobsite repairs and fabrication Ability to Pass a Professional Certification (e.g. an AWS welding certificate) a plus Working Conditions Primarily works inside exposed to the elements Requires travel, including overnight outside of employee's home territory Exposed to hazardous materials Exposed to frequent loud noises Exposed to dangerous machinery Generally works five 8-hour days, although overtime may occur Application Process: Post Offer Drug Testing and Background Checks are required. CROM, LLC is an E-Verify Employer. EEO Statement: CROM, LLC is an equal employment opportunity employer who may provide reasonable accommodation to enable individuals with disabilities to perform the essential functions of the job. EEO/VETS/DISABILITY

Since its foundation in 1986, Thompson Construction Group, Inc. has grown from a small, local company into one of the largest privately held companies based in South Carolina. Our diverse services portfolio includes capital projects, power services, maintenance services, disaster recovery, hydro consulting and commercial construction. We believe in investing in our employees to help them reach their professional goals, as well as their personal goals. Thompson promotes a work environment that fosters learning, leadership, and development along with a safety culture that never waivers. Thompson is headquartered in Sumter, South Carolina with offices spanning the United States, primarily southeast and central United States. Position Description Lay out, fit, and weld fabricated, cast, and forged components to assemble structural forms. This will be completed in a safe and timely manner with the highest quality possible. Job Responsibilities * Lay out, position, align, and secure parts and assemblies prior to assembly. * Examine work pieces for defects and measure work pieces to ensure conformance with specifications. * Weld together metal components of products such as piping systems, plate, pipe and tube or structural shapes, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment. * Obtain specified electrode and insert electrode into portable holder or thread consumable electrode wire through portable welding gun. * Connect cables and adjust welding unit to obtain amperage, voltage, polarity, and pulse, as specified by welding procedure or supervisor. * Start power supply to produce electric current. * Strike (form) arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. * Manually guide electrode or gun along weld-line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. * Weld in flat, horizontal, vertical, or overhead positions. * Examine weld for bead size and other specifications. * May manually apply filler rod to supply weld metal. * May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. * May prepare broken parts for welding by grooving or scarfing surfaces. * May remove excess weld, defective weld material, slag, and spatter, using carbon arc gouge, hand scraper, grinder or power chipper. * May preheat work piece, using hand torch or heating furnace. * May position and clamp work piece together or assemble then in a jig or fixture. * May tack weld assemblies together. * May cut metal plates or structural shapes. * May fit up parts (pipe, tube, structural shapes, or plate) and inspect fit before welding. * May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded-Metal Arc welding processes. * Respiratory protection is common and may be required. * Responsible for observing and complying with all safety and project rules. * Other duties as assigned. Job Qualifications * Must be at least 18 years of age. * Must be able to TIG and stick weld on stainless and/or carbon (pipe size and material welded varies per site). * Must pass required weld tests (varies per site). * Must be willing to work outside craft. * Workers are surrounded by hot materials and strong light. * Must wear safety gear, including protective goggles, masks, face shields and safety shoes. * Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor. * Utilize basic math and a calculator to solve geometric problems associated with Instrument Fitting. * May be required to work outside and be subject to severe weather as well. * Employee must be able to climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments. * Candidate may be required to pass a drug test and criminal background check based on job location/requirements. * Required Tool List For Pipe Welder: * Must have own TIG Rig and Stinger * 1 each 12" Crescent Wench * 1 each Stinger (whip) for Stick Welding * 1 each Tig Rig w/Hose and Gauges * 1 each 25' Tape Measure * 1 set Burning Goggles * 1 each Chipping Hammer * 1 set Brushes * 1 pair Welding Gloves * 1 pair Leathers (optional) * 1 each Welding Hood and Lens (Must be attached to hard hat or will attach to hard hat) * *No Soft Cap Hoods * Must be at least 18 years of age * Must be able to lift 50 pounds, climb, bend, twist, stand and reach repetitively. * Work in hot/cold/damp/cramped environments * 40 or more hours per week with possible weekend work * Background check and drug screen based on job location/requirements Benefits * We strive to provide a competitive compensation and benefits package. This includes but is not limited to medical, dental, vision, life insurance, 401(k), wellness programs and career development. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: ************** Email: *********************************** Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese If you want to view the Pay Transparency Policy Statement, please click the link: English To see other positions, click here.

Job DescriptionStructural Pipefitter $1,400+ WEEKLY Join SAVARD Personnel Group - where your skills are valued! Key Requirements: Must have experience as a welder/pipefitter Shipyard or marine setting is a must. Must be able to pass a welding and pipefitting test. Must have the ability to Fit and assemble steel structures for marine vessels and lay out and fabricate steel components to specification Burn, wash, and bevel steel with hand torches Must be able to Read and interpret blueprints and construction specifications Must have the availability to Measure, cut, and install structural plate, pipe, beams, and related components Must be able to Conduct quality inspections on assembled parts Shifts: Monday-Thursday 7:30am-4pm Fridays 7:30am-3:00pm Duration: Temp-Hire How to Apply: Apply & Receive offers NOW! Download Savard 24/7 App! Call us at 225-930-0685 or 228-262-0878 Job ID# 50548115

Full-time Description The 1st Class Pipe Welder will play a crucial role in the construction of ships and other marine vessels. This position will work to directly contribute to the integrity, safety, and functionality of marine vessels. The schedule for this role has 6 hours of built in overtime. Additional overtime is typically available for those interested. Full Time Position: Monday-Thursday 6:00 AM - 4:30 PM and Friday 6:00 AM - 12:00 PM Successful candidates will pass a 6g unrestricted pipe welding test. The test will consist of stick welding on carbon steel pipe. Full benefits package includes medical, dental, vision, 401(k) and additional voluntary benefits. Key Responsibilities: Welding Functions: Perform various welding tasks, including Stick Welding, Socket Welding, Butt Welding, with a focus on producing consistent, high-quality welds. Collaboration: Work closely with other team members, including welders, pipefitters, and supervisors, to coordinate tasks and ensure timely completion of projects. Safety Compliance: Adhere to all safety protocols and procedures to maintain a safe working environment for yourself and your colleagues. Requirements Proven experience as a Pipe Welder in shipbuilding or maritime construction (3 years of prior experience preferred). Must be able to pass and certify on 6g. Demonstrated knowledge and ability to perform various welding functions with precision. Capable of handling a physical workload and working in various positions. Ability to consistently produce welds that meet quality and production standards. Education: High school diploma or equivalent preferred. Additional technical training or certification in welding, fabrication, or shipbuilding preferred. Physical Requirements: Ability to lift heavy objects and work in confined spaces as required in a shipbuilding environment. Physical agility and dexterity to perform tasks such as bending, stooping, and reaching. Willingness to work in various weather conditions and environments, including both indoor and outdoor settings. If you are a skilled welder ready for a challenging role in a dynamic environment, we encourage you to apply immediately.

Job Description Posting Name: Welder 1 Schedule: M - T, 5:00 AM - 3:30 PM is located at our Bayou La Batre, AL facility. Join the Birdon team and help ensure USCG boats are safe and reliable! Our Welders are an integral piece of our work on a daily basis. Some of your daily functions will include: Must be able to read blueprints. Must be able to set up own equipment, tack, distribute heat evenly with a clean bead. Must be able to pass a Pre-Employment Mock Weld Test. Possess strong attention to detail in order to aid strong quality assurance program. Excellent math skills with the ability to read a tape measure accurately. Must be able to weld aluminum and carbon steel proficiently. Ability to fix a defected weld. Must be able to weld in any position (uphill, horizontal, vertical, or flat) If you have at least 3 years' experience as a Welder, possess a High School Diploma or GED and fundamental knowledge in marine or manufacturing industry, we want to talk to you! Birdon is committed to the HEALTH and SAFETY of our workforce and to the ENVIRONMENT, we expect this same commitment from all employees. Birdon America Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Know Your Rights The Company invites any applicant and/or employee to review the Company's written Affirmative Action Plan. This plan is available for inspection upon request by emailing ************. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact ************ for further assistance.