Workforce Strategies, Inc. jobs in Kentwood, MI

Get your hands on something solid! As a Molding Press Operator, you'll be right in the action, shaping strong, fiberglass-based parts that fuel essential industries. From pressing and sanding to inspecting for quality, you'll be the one behind every perfectly crafted component. If you're looking for a job where your work is seen and felt, this could be the fit for you. Our Grand Haven team brings top-tier composite materials to the market, known for durability and precision. Join us, and be part of a legacy of quality. In this role, you'll tackle each step of the molding process, from press to final finish, working on parts up to 50 pounds. This position requires stamina, attention to detail, and readiness for tasks like lifting, bending, and moving components safely. We Offer this position (Molding Press Operator): • Pay Rate: $18 per hour. • Shift Options: • 1st Shift: 7 a. m. - 3:30 p. m. , Monday to Friday • 2nd Shift: 3 p. m. - 11:30 p. m. , Monday to Friday • 3rd Shift: 11 p. m. - 7:30 a. m. , Monday to Friday • A $100 bonus for every friend you refer to us, plus an additional $25 bonus for your referral to WSI. • Weekly pay. • Pathway to permanent hire with excellent attendance, performance, and attitude. • One earbud allowed during work hours. Qualifications for this role include: • High school diploma or GED. • Ability to lift up to 50 pounds and work on your feet for the entire shift. • Must be able to speak, write, and read basic English. • Physical readiness for tasks involving twisting, bending, and lifting. • Focus on safety and quality control. Join our crew and bring quality parts to life! Apply today and take the next step in Grand Haven's dynamic production scene. By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying ‘stop' at any time#IND8#Talroo8

Keep Michigan's machines running and waste down as our Oil Reclamation Service Technician, turning dirty oil into clean results on every route. Picture a day that starts in Holland with a loaded pickup and trailer, then rolls out to job sites where you set up fluid-recovery gear, run the process, and document results. Your calm focus, safe driving, and friendly attitude make long-term customers out of first-time callers. It's hands-on, practical work with visible impact. And if you enjoy a good before-and-after moment, watching dark, contaminated oil come back clear never gets old. Bonus topical perk: your step counter will love the loading, staging, and hose wrangling more than any fancy gym app.This West Michigan operation specializes in oil reclamation, fluid analysis, and specialty lubricants across the Midwest. They extend the life of industrial oils, cut waste, and help plants boost uptime with on-site services and small-volume distribution support.Each day you will prep and tow equipment to customer sites, stage and run reclamation systems, load and unload products, record service details, and communicate timelines with on-site contacts. You'll solve small hiccups on the fly, keep safety front and center, and wrap up with clean documentation.We offer this position: $18-$21 per hour, day shift, 7:30 a.m.-4:00/4:30 p.m., Monday-Friday, paid weekly Growth opportunities with on-the-job training A positive, family-friendly work environment A $100 bonus for every friend you refer to us, plus an additional $25 bonus for your referral to WSI. Long-term career path based on performance Qualifications for this position include: Valid driver's license with a clean driving record and comfort towing a small trailer Ability to work independently with strong attention to detail Must be able to speak, write, and read basic English Customer service mindset and professional communication Basic computer skills for logging work and updating records Able to lift, move, and stage hoses, filters, and equipment as needed You like work that feels useful, pays steadily, and gets you out in the field. If you're self-driven, safety minded, and ready to learn, raise your hand. Tell us a bit about your experience, your availability, and how soon you can start in Holland.By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You can unsubscribe from email or SMS messages by replying ‘stop' at any time. #IND8#Talroo8

Every bridge, truck frame, and power cabinet starts with someone who knows how to bend steel the right way. As a Brake Press Set-Up Operator, you're that person. You'll read the prints, shape the parts, and make sure every bend is exact-because when your work leaves the plant, it's part of something bigger. This is skilled trade at its truest form, the kind that keeps America's industries running long after the lights go out.Our Grand Haven facility is part of a long-standing Michigan metal-fabrication leader known for cutting, forming, and welding custom components for major industries across the Midwest.Each night you'll study blueprints, set up and adjust your brake press, form and measure sheet-metal parts for accuracy, inspect finished work, perform light maintenance, and keep a clean, organized, and safe workstation. You'll also help train team members as needed to maintain high quality across the floor.What We Offer This Position $22 per hour, 6:30 pm-5 am Monday-Thursday Weekly pay Health insurance Paid holidays 401(k) participation On-the-job training and advancement potential $100 bonus for every friend you refer to us, plus an additional $25 bonus for your referral to WSI Potential for permanent hire based on performance Qualifications 2+ years previous brake press experience preferred Experience using basic hand and power tools Must be able to speak, write, and read basic English Ability to read blueprints, schematics, and work instructions High school diploma or GED Able to lift 45 lbs, stand and bend for long periods, and maintain good manual dexterity If you take pride in work that outlasts the shift and helps build the things people rely on every day, this night-shift role in Grand Haven is calling your name. Step up and show what precision looks like in motion.By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You can unsubscribe from email or SMS messages by replying ‘stop' at any time. #IND8#Talroo8

**Job Title: 2nd Shift Shipping & Receiving Coordinator** **Job Description** We are seeking a dedicated 2nd Shift Shipping & Receiving Coordinator to manage operations in the Sterile Dock and warehouse area. This role involves receiving shipments, completing inventory using RF scanners and manual counting, and inputting data into systems via a computer or laptop. The successful candidate will coordinate with logistics customers for shipping and scheduling, as well as manage packaging and wrapping tasks. Proficiency in Microsoft Excel, Word, Teams, and Email is essential. The role also involves creating purchase orders and necessary paperwork for loads, utilizing hi-lo and pallet jack equipment. **Responsibilities** + Receive shipments and complete inventory using RF scanners and manual counting. + Input inventory data into systems using computers or laptops. + Coordinate with logistics customers for shipping and scheduling pick-ups. + Package and wrap skids for shipment. + Utilize hi-lo and pallet jack equipment effectively. + Perform 25% computer work and 75% warehouse activities. + Create purchase orders and other documentation required for loads. **Essential Skills** + Proficiency in Microsoft Excel, Word, Teams, and Email. + Experience with inventory management and RF scanners. + Strong communication skills, both verbal and written. + Ability to operate hi-lo and pallet jack equipment. + Understanding of logistics and shipping coordination. **Additional Skills & Qualifications** + Experience with ERP systems is a plus. + Certification in forklift operation is advantageous. + Prior experience in warehouse inventory management. **Why Work Here?** Join a leading surgical manufacturer renowned for its commitment to safety, sustainability, and excellence. Enjoy comprehensive company benefits from day one, including opportunities for growth, team collaboration, and a supportive work environment. **Work Environment** The role operates on a 2nd Shift from 1pm to 9pm, with some flexibility in start and end times. Initial training is provided on the 1st shift for 1-2 months, Monday to Friday, with a rotating Saturday schedule. The Sterile Dock features three dock doors, a scale and wrapper in the middle, and lanes capable of fitting four skids each. The area requires maneuverability in close quarters, and a desk area is equipped with a computer and documentation folders. Hi-Lo certification is provided. **Job Type & Location** This is a Permanent position based out of Caledonia, MI. **Pay and Benefits** The pay range for this position is $48000.00 - $57000.00/yr. You will be eligible to enroll in benefits on day ONE, including Medical, Dental, Vision, Life Insurance, and 401K with company match. Generous Paid Time Off benefits are also included. **Workplace Type** This is a fully onsite position in Caledonia,MI. **Application Deadline** This position is anticipated to close on Dec 26, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description This leading uniform company is looking for Route Packers to join their team right now. As a Route Packer, you'll be responsible for preparing and packing materials to be sent out for delivery, all while enjoying a consistent schedule. Key factors for success in this role include a positive attitude, attention to detail, and focus. A typical day includes: Reading reports to determine necessary materials for delivery Retrieving products Staging the next day's deliveries by filling baskets with materials (soaps, mats, uniforms, etc.) Using a machine to roll mats of all sizes Let's chat about the Route Packer position if you: Are able to bend, lift, and twist consistently Must be able to read, write and speak English Don't mind to workout that comes with lifting up to 40lbs Enjoy working with your hands Would rather be on your feet all day than behind a desk Prefer a detailed process and a steady pace Have dependable transportation that gets you to work on time every day We off Route Packers: Full-time work (2pm-10:30pm) A pay rate of $18.50/hr $100 referral bonus when you refer a friend to work with WSI Weekly pay and medical benefits A bright, clean, and positive working environment Team-oriented environment A 90-day temp-to-hire role with the opportunity to be hired in with good attendance and productivity By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time.

**Why Aerotek?** Aerotek is an operating company within Allegis Group, a global leader in talent solutions. We are a privately held organization with over **200+ offices** nationwide. We work with **95%** of **Fortune 500 companies** and specialize in staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. **Your development is the key to success..** As a team of driven individuals, we push ourselves and those around us to develop personally and professionally. We believe each person brings a broad range of unique experiences and perspectives - rooted in a different set of identity and cultural attributes. We pride ourselves on building relationships in which we seek to understand, meet people where they are, and celebrate our differences - all of which drives our high performance, engagement and innovation. To ensure your success, once hired you will take part in a comprehensive training program surrounded by a supportive team that will prepare you for your career ahead. At Aerotek, we promote exclusively from within. Our employees start almost always as recruiters, just like you, and are promoted into advanced recruiting & sales career paths. As a Recruiter you will impact both our candidates and customers by finding the right people for the right jobs. You will... + Identify qualified candidates through various recruiting and sourcing tools + Screen and interview qualified candidates + Partner with your Account Manager to identify top accounts, target skill sets, and key market segments + Build and maintain relationships with industry contacts to gain knowledge and generate referrals and sales leads + Perform various customer service related activities + Give back to your community by volunteering and partnering with various philanthropic organizations **Let's talk money and perks!** Aerotek offers a **base salary** **of $45,000** with unlimited earning potential through **weekly commission** after the hourly training period. Upon one year of employment, you will also receive a raise in your base salary to **$55,000.** Additional benefits include (but not limited to): + Medical, Dental, and Vision + Company funded Health savings account and 401K account + Paid time off + Employee discounts _Performance based incentives_ : + Quarterly bonuses + All-expense paid trip + Company fundedinvestment plan **_Projected Recruiter Earnings:_** + Year 1: $50,000 + Year 2: $76,000 + Year 3: $102,000 **_Projected Sales Manager Earnings:_** + Year 1: $80,800 + Year 2: $121,500 + Year 3: $150,000 **Do you have the following?** + Bachelor's Degree (preferred) + Customer or sales focused experience + Experience collaborating in a team environment aerotekinternal Connect With Us! (************************************************************************************************************************************************************** Cookie Notice (***************************************** Cookie Settings Privacy Notices (******************************************* CA Notice at Collection CA Notice at Collection (for Employees and Job Applicants) (************************************************************************************ Your Privacy Choices Our People Are Everything. Aerotek Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 14,000 clients each year. Aerotek is an operating company within Allegis Group, a global leader in talent solutions. To learn more, visit: Aerotek.com . The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please call ************ or email accommodation@aerotek.com for other accommodation options. However, if you have questions about this position, please contact the Recruiter located at the bottom of the job posting. The Recruiter is the sole point of contact for questions about this position. **Job ID** _2025-12818_ **Category** _Sales_ **Min** _USD $45,000.00/Yr_ **Max** _USD $65,000.00/Yr_ **Location : Location** _US-MI-Grand Rapids_

We are seeking a skilled Industrial Maintenance Technician responsible for the installation, maintenance, and repair of machinery, equipment, facilities, and electrical systems within a dynamic stamping and welded assembly plant. The ideal candidate will play a critical role in ensuring the smooth operation of our manufacturing processes. **Responsibilities** + Perform installation, maintenance, and repairs of machinery, equipment, facilities, and electrical systems. + Dismantle defective machines and equipment, and install new or repaired parts. + Install and repair electrical apparatus up to 400 VAC and 800 amps, including transformers, wiring, and electrical and electronic components. + Repair automated machinery and equipment, specifically Fanuc robots. **Essential Skills** + Experience with Fanuc robot troubleshooting. + Proficiency in robotics and industrial maintenance. + Strong understanding of electrical systems and automation. + Familiarity with programmable logic controllers and Allen-Bradley equipment. + Ability to read and interpret blueprints and welding techniques. **Additional Skills & Qualifications** + Experience with robotic spot welding. + Ability to touch up robot points and move spot welds. + Understanding of IO (inputs/outputs) and ability to home robots. + Extensive experience with robots, particularly Fanuc (95%). **Job Type & Location** This is a Contract to Hire position based out of Grand Ledge, MI. **Pay and Benefits** The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Grand Ledge,MI. **Application Deadline** This position is anticipated to close on Dec 26, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Embark on a journey where your dedication shapes the future of mobility and comfort. As an Assembly Associate in Battle Creek, you're not just a part of the process; you're at the heart of innovation, creating thermal components that enhance the driving experience worldwide. We're hiring for a beacon of manufacturing excellence, renowned for their thermal products that serve every major carmaker, heavy-duty manufacturer, and the automotive aftermarket. Their expansive facilities in Battle Creek reflect their commitment to innovation and quality, producing air conditioning and engine cooling systems that are integral to vehicles across the globe. In this dynamic role, you'll be responsible for assembling and manufacturing thermal components that are essential for automotive comfort and performance. Whether handling assembly duties or operating sophisticated machinery, your reliability, eagerness to learn, and dedication to quality will define your success. We Offer the position of Assembly Associate: Competitive pay ranges from $18.58/hr to $21.33/hr across all shifts, ensuring that your hard work is rewarded. Full-time opportunities across 1st and 2nd shift. Overtime opportunities to boost your earnings. A $100 referral bonus for introducing friends to our team. Comprehensive benefits and advancement opportunities once you're hired. Qualifications for this role include: 1+ year(s) of experience in manufacturing, light industrial, or assembly roles, preferred but not required. A knack for precision and a keen eye for detail, ensuring every component meets our stringent quality standards. Familiarity with assembly tools, such as electric air-drivers, demonstrating your technical prowess. A robust work ethic and a commitment to safety, embodying our dedication to excellence and well-being. The ability to lift up to 35 pounds and perform tasks involving bending, twisting, and gripping, showcasing your physical dexterity. Must Be Able to Speak, Write, and Read basic English, ensuring effective communication within our diverse team. No high school diploma? We provide an on-site GED program to support your continuous growth. Join us in Battle Creek and be part of a team that's driving the future of automotive technology. Apply now to start your journey with a company where every day is an opportunity to excel and innovate. By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time. #talroo3

Job DescriptionDo you even lift, bro?This local manufacturer of corporate, career, and casual apparel serves Hospitality, Restaurant, Casino, Hotel/Resort Properties, and Transit and Security companies all over the world. Their Warehouse Associates help complete product shipments by processing and loading orders. Attention to detail, willingness to learn, and manual labor are keys to success in this entry-level role. Let's chat about the Warehouse Associate role if you: Can lift up to 50 lbs Welcome the daily workout that comes with continuously lifting Can (or are willing to learn how to) operate forklifts Wield a scan gun like a boss Work well with others Think jeans are the ideal work uniform Have dependable transportation that gets you to work on time every day Have a HS diploma/GED Can pass a drug screen Must be able to read, write and speak English Are felony and conviction-free We offer Warehouse Associates: Full-time work starting at $15-17/hour Pay increase upon hire $100 referral bonus when you refer a friend to work with WSI Weekly pay and medical benefits A bright, clean, and positive working environment Team-oriented environment The opportunity to be hired in with good attendance and productivity Submit your Warehouse Associate resume by clicking the “Apply Now” button below. We can't wait to talk to you! By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time.

We are seeking a skilled Carpentry Installation Technician to join our team. This role involves traveling to commercial and prebuilt residential houses to perform installations. You will be part of a team responsible for trim carpentry and rough framing, ensuring high-quality installations. **Responsibilities** + Travel to commercial and residential sites to perform installations. + Conduct trim carpentry and rough framing work. + Collaborate with a team of 3-4 members during installations. + Utilize basic tools such as a hammer and tape measure; additional tools will be provided. + Communicate effectively to address field issues and suggest improvements. + Adhere to company safety guidelines and OSHA fall protection procedures. + Assist and support team members in various tasks. + Manage customer expectations professionally. **Skills & Qualifications** + Minimum of 2 years of carpentry experience. + Proficiency in trim and rough carpentry. + Ability to read a tape measure accurately. + Experience with window installations in high-level houses and commercial buildings. + Certification in operating a scissor lift is a plus. + Ability to use cordless drivers, levels, and nail guns. + Comfortable climbing high ladders and lifting 50 pounds multiple times a day. **Why Work Here?** Join a rapidly growing company where you can embrace and enjoy the opportunity for growth. Benefit from on-the-job training and a supportive team environment. We provide all necessary personal protective equipment (PPE) to ensure your safety. **Work Environment** You will meet at the shop every morning before heading to your assigned project. The work involves both outdoor and indoor window installations. Travel may require up to two hours per day, with typical distances ranging from 45 minutes to 1.5 hours. While a company car will be used for transportation to each site, you must have your own basic tools. Embrace a team-oriented environment focused on safety and professionalism. **Job Type & Location** This is a Contract position based out of Grand Rapids, MI. **Pay and Benefits** The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Grand Rapids,MI. **Application Deadline** This position is anticipated to close on Dec 20, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job DescriptionIn the heart of the Fort Custer manufacturing machine, a role awaits that not only promises stability but also a sense of pride in contributing to the global automotive landscape. As a Forklift Operator, you'll be part of a team at a leading facility known for its innovative thermal products for North American automakers.We're hiring for a leader in automotive manufacturing since 1984, known for their excellence in air conditioning and engine cooling systems. With a 100-acre campus and a commitment to quality and sustainability, they're a recognized, veteran-friendly employer. In your daily routine, you'll engage in essential operations such as operating sit-down forklifts quickly to maintain plant production, maneuvering tugger carts, picking parts, and ensuring the accurate weighing of finished parts for shipment. This role is critical, as the components you handle are integral to vehicles worldwide, reflecting our commitment to excellence and innovation.We offer the position of Forklift Operator: 1st and 2nd shift $18.58 - $20.58/hr Opportunities for overtime for additional earnings. A $100 + $25 BONUS for referrals to WSI. GED program and exceptional training to launch your successful career as a manufacturing professional Weekly pay and the chance to be hired in, reflecting your dedication, punctuality, and performance. Qualifications for this role include: Adaptability to a multi-temperature environment 6 months of sit-down forklift experience required The ability to lift up to 35 pounds and perform tasks involving bending, twisting, and gripping A commitment to safety, punctuality, and team collaboration. Must Be Able to Speak, Write, and Read basic English. No high school diploma? No problem. We support your growth with an on-site GED program. Join us in Battle Creek and take the first step toward a fulfilling career, where your contribution makes a difference not just locally but globally. Apply now and see where your skills can take you!By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time.

Job Description We know metals and plastics inside and out. Over the last fifty years at Schupan Aluminum & Plastic Sales, we've grown to five divisions throughout Michigan, Indiana, Illinois and Ohio. Our teams are experts in electronics recycling, industrial recycling, beverage container processing, materials trading, and aluminum and plastic sales. As a CNC Machine Operator, you'll maintain and observe state-of-the-art equipment that makes precise cuts of metal and plastic. You will get to use all kinds of cool tools as you perform inspections using calipers, micrometers, tapes, height gauges, check fixtures, and drop gauges. It's a job that requires consistency and attention to detail.Qualifications for the position we'd like to see: You have previous CNC experience Confidently comprehend decimals and fractions Possess knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models Have excellent attention-to-detail to inspect equipment, structures, or materials and identify the cause of errors or other problems or defects Can frequently lift, move, or position materials weighing up to 50 lbs Keep a clean and safe work environment Enjoy fast-paced work conditions in a warehouse environment that can be loud, lively, and have some temperature variations Have a positive attitude and communicate well with others Have dependable transportation that gets you to work on time every day We offer CNC Machine Operators: Position starts at $17-$19/hour Full time work available: 1st shift: Mon-Thur 5am-3:30pm (OT on Fridays)2nd shift: Mon-Thur 3:30 pm-2am (OT on Fridays) 1st shift weekend: Fri-Sun 4am-4:30pm (OT on Thursdays) The opportunity to earn extra cash through possible overtime Weekly pay Must be able to read, write and speak English. THC Friendly Position $100 referral bonus when you refer a friend to work with WSI The opportunity to be hired in with good attendance and productivity An excellent benefits package upon hire-in, including employee discounts on refurbished electronics, pet insurance, a Thanksgiving turkey, and more. We're one of Kalamazoo's best companies, and that's only thanks to the great people who call Schupan and Sons home. If you're ready to be part of our team APPLY NOW!By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time.

We are seeking a skilled sheet metal installer to join our team in the HVAC Heating and Cooling industry. The role involves fabricating and installing ductwork in new and renovated commercial buildings. You will work from blueprints, creating ductwork on-site and installing it according to construction documents, and lead teams on various commercial projects. The role requires travel to job sites up to 40 miles from Grand Rapids. Personal protective equipment (PPE) and a basic tool belt are needed, but assistance can be provided if necessary. **Responsibilities** + Lead crews on various commercial new construction jobs. + Install HVAC ductwork with precision and efficiency. + Fabricate and assemble sheet metal components for duct systems. + Read and interpret blueprints to guide installation processes. + Drive to various job sites in West Michigan for project assignments. **Skills & Qualifications** + 5+ years of HVAC installation experience in commercial settings. + Experience leading teams and/or running jobs. + Proficiency in reading blueprints. + Ability to troubleshoot issues on existing equipment. + Competence in using power and hand tools. **Why Work Here?** Join an employee-owned company where you can earn shares and receive yearly stock bonuses based on company performance. Enjoy comprehensive benefits including medical, dental, and vision coverage, a clothing allowance, and safety equipment provisions. Take part in company outings and benefit from training courses that may be conducted on the clock. **Work Environment** Work during the 1st shift, starting between 6am to 2/3pm with 8-9 hour shifts. You will need PPE including steel-toed boots, hard hat, safety glasses, and a reflective vest. Work on construction-based projects at various job sites, collaborating with a team of 2-10 people. **Job Type & Location** This is a Contract to Hire position based out of Grand Rapids, MI. **Pay and Benefits** The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Grand Rapids,MI. **Application Deadline** This position is anticipated to close on Dec 25, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job DescriptionFolding laundry at home? Not exciting. Getting paid to inspect, hang, and prepare a variety of uniforms? Now we're talking! Detailed Description:You: Can spot a flaw from a mile away thanks to your keen eye for detail Like working with your hands Work well with others Prefer detailed processes and a steady pace Would rather be on your feet all day than behind a desk Can repeatedly bend, stretch, twist and lift We Offer these positions: Provide a bright, clean, and positive working environment Pay $17.50 per hour to start Medical benefits Pay $100 referral bonuses when you refer a friend to work with WSI! Favor strong work ethic Qualifications: Can pass a drug screen Must be at least 18 years old Must be able to read, write and speak English Positive attitude By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time.

Job DescriptionIs your other car a forklift? We've been searching hi-lo for people like you! Come work in a clean, well-lit warehouse environment for a local and growing logistics company. You'll drive a forklift, pick orders, and load/unload trucks for the majority of your workday. Attention to detail, forklift safety, and initiative are key factors for success in this role.Let's chat about the Forklift Operator role if you: Have Pick and Reach Truck or Sit Down Forklift experience Think the ideal work uniform consists of jeans and t-shirts Work well with others and thrive in a positive work environment Have dependable transportation that gets you to work on time every day Must be able to read, write and speak English Understand the importance of maintaining workplace safety at all times Can pass a drug screen We offer Forklift Operators: Full-time, 1st shift (7 AM - 3:30 PM) & 2nd shift (4PM - 12:30 AM) Monday - Friday Starting pay of $15-18.00/hour based on experience Opportunities to earn extra money via overtime $100 referral bonus when you refer a friend to work with WSI Weekly pay and medical benefits A bright, clean, and positive working environment Consistent work schedule with work/life balance Team-oriented environment The opportunity to be hired in with good attendance and productivity Other job titles considered: Material Handler, Reach Truck, Sit Down, Warehouse, Pick Truck, RF ScannerBy submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time. IND3

**Why Aerotek?** Aerotek is an operating company within Allegis Group, a global leader in talent solutions. We are a privately held organization with over **200+ offices** nationwide. We work with **95%** of **Fortune 500 companies** and specialize in staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. **Working at Aerotek and why you will love it...** At Aerotek, we prioritize inclusivity and foster a **magnetic work environment** that empowers our employees to achieve both personal and professional aspirations. By putting the people first, our corporate culture encourages employee engagement and enhances performance through comprehensive training and a positive culture. We promote exclusively from within. The SalesDevelopment Representativeis responsible for learning the fundamentals of recruiting and the fundamentals of sales, including prospecting, client engagement, req qualification and delivery.The Sales Development Rep is responsible for learning and executing on all steps associated with the sales process.The SalesDevelopment Representativemust identify target accounts in defined territory and make cold calls to set meeting at perspective targets.This entry-level sales role is designed for individuals eager to learn the full sales cycle, with a clear path toward becoming an Account Manager.The SDR will work closely with the Delivery and Sales teams to build client relationships, generate leads, and support revenue growth initiatives. + Utilize the Aerotek 7 stages of the SOLVE model to target, engage and service new and existing clients + Increase sales and market share through assigned and newly generated accounts + Research and build call sheets using tools like LinkedIn and Connected. + Identify, develop and manage new and existing customer relationships by leveraging resources for lead generation + Complete Aerotek Account Manager Onboarding training + Generate leads, set and attend meetings with defined in territory + Maximize profitability by effectively negotiating bill rates and terms; ensure that direct labor rates are in line with market standards + Build and maintain relationships within accounts by providing quality contractors; proactively market resumes of ideal candidates + Perform sales related activities including, but not limited to attending meetings at client sites and client manager, and contractor lunches + Communicate account knowledge to team members (recruiters, FOA, sales, Director) through "req meetings" and Red Zone meetings + Collaborate with Account Managers and Directors to support territory planning and workforce strategy. + Generate, document and track all leads generated and perform outreach to targeted customers **Let's talk money and perks!** Upon successful completion of our salary equivalent hourly training period, Aerotek offers a **base salary of $60,000** with unlimited earning potential through **weekly** commission, **monthly car allowance** , cell phone reimbursement and other performance-based incentives. **Projected Sales Earnings:** + Training Year: $60,000 + First full Year 1: $80,000 + Second full Year: $121,000 **Additional benefits include** : + $425 Car Allowance + up to $100 cell phone reimbursement + Medical, dental and vision + HSA & 401k account + 20 days of paid time off as well as paid holidays + Parental/Family leave + Employee discounts + Employee-led resource groups **Performance based incentives** : + Quarterly bonuses + All-expense paid trip + Company funded investment plan **Qualifications:** Sales Degree/ Certification or 1-2 years of sales experience (sales internship, sales competitions encouraged) Connect With Us! (******************************************************************************************************************************************************** Cookie Notice (***************************************** Cookie Settings Privacy Notices (******************************************* CA Notice at Collection CA Notice at Collection (for Employees and Job Applicants) (************************************************************************************ Your Privacy Choices Our People Are Everything. Aerotek Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 14,000 clients each year. Aerotek is an operating company within Allegis Group, a global leader in talent solutions. To learn more, visit: Aerotek.com . The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please call ************ or email accommodation@aerotek.com for other accommodation options. However, if you have questions about this position, please contact the Recruiter located at the bottom of the job posting. The Recruiter is the sole point of contact for questions about this position. **Job ID** _2025-12942_ **Category** _Sales_ **Min** _USD $60,000.00/Yr_ **Max** _USD $60,000.00/Yr_ **Location : Location** _US-MI-Portage_

Job DescriptionYou walk in and know exactly what's where, what's missing, and what doesn't add up. That's the kind of brain we need running Inventory Control in Mattawan. You'll be the one catching errors before they become delays, keeping the numbers tight, and making sure production never stalls because someone couldn't find the parts. This isn't desk work all day-you'll bounce between computer screens, spreadsheets, and the floor, staying sharp on both sides of the operation. It's a Monday-to-Friday gig with the occasional weekend. If you like knowing exactly what's going on and hate loose ends, this is your kind of job.We are a Michiganbased manufacturer supplying highprecision molded and electromechanical components to the auto industry. Since 2005, we've grown into a vertically integrated, fullservice supplier with hundreds of team members across multiple locations - delivering design, tooling, manufacturing, and qualitycontrol under one roof. Our plastics, moldings, and assemblies roll off the line into vehicles you see every day. In this job, you'll track every piece of incoming and outgoing inventory, run weekly cycle counts, write and update procedures, dig into discrepancies, and help run full physical inventories. You'll partner with production to keep shelves stocked and numbers accurate.What We Offer This Position $19/hour, Monday-Friday 8am-4pm (some weekends) Weekly pay Health benefits, PTO, and more through WSI $100 bonus for every friend you refer, plus an extra $25 for each one referred to WSI Chance for full-time hire based on your performance Qualifications 1+ year experience in inventory control Strong Microsoft Excel, Outlook, and Word skills Must be able to speak, write, and read basic English Detail-focused and organized, even when things get hectic Strong communication and solid follow-through High school diploma or equivalent If you've got a brain for numbers and a sharp eye for what's missing, don't wait-send us your info and let's get things moving.(By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You can unsubscribe from email or SMS messages by replying ‘stop' at any time.) #IND2

Job Description We're providing superior acoustical products worldwide! Before you break out your guitars, it's not that kind of acoustic. As a Production Associate for this fiber-based molding company, you will assist in the production of acoustical fiber insulation for a variety of automotive applications.Let's chat about the Production Associate role if you: Understand the importance of a safe work environment Can work at a steady pace Have high attention to detail thanks to your keen eye Have reliable transportation that gets you to work on time every day Are able to pass a pre-employment drug screen (no THC testing for pre-employment!) and background check Must be able to read, write and speak English Have previous manufacturing experience (not required, but preferred!) We offer our Production Associates: A pay rate of $16.50-$18.50/hr, depending on the shift and position Full-time opportunities on all shifts 10-hour workdays The ability to be hired in at 480 hours The freedom to dress for your own workday (shorts, sweatpants, and tank tops are a-okay!) $100 bonus when you refer a friend to WSI By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time.

Keep Michigan's machines running and waste down as our Oil Reclamation Service Technician, turning dirty oil into clean results on every route. Picture a day that starts in Holland with a loaded pickup and trailer, then rolls out to job sites where you set up fluid-recovery gear, run the process, and document results. Your calm focus, safe driving, and friendly attitude make long-term customers out of first-time callers. It's hands-on, practical work with visible impact. And if you enjoy a good before-and-after moment, watching dark, contaminated oil come back clear never gets old. Bonus topical perk: your step counter will love the loading, staging, and hose wrangling more than any fancy gym app.This West Michigan operation specializes in oil reclamation, fluid analysis, and specialty lubricants across the Midwest. They extend the life of industrial oils, cut waste, and help plants boost uptime with on-site services and small-volume distribution support.Each day you will prep and tow equipment to customer sites, stage and run reclamation systems, load and unload products, record service details, and communicate timelines with on-site contacts. You'll solve small hiccups on the fly, keep safety front and center, and wrap up with clean documentation.We offer this position: $18-$21 per hour, day shift, 7:30 a.m.-4:00/4:30 p.m., Monday-Friday, paid weekly Growth opportunities with on-the-job training A positive, family-friendly work environment A $100 bonus for every friend you refer to us, plus an additional $25 bonus for your referral to WSI. Long-term career path based on performance Qualifications for this position include: Valid driver's license with a clean driving record and comfort towing a small trailer Ability to work independently with strong attention to detail Must be able to speak, write, and read basic English Customer service mindset and professional communication Basic computer skills for logging work and updating records Able to lift, move, and stage hoses, filters, and equipment as needed You like work that feels useful, pays steadily, and gets you out in the field. If you're self-driven, safety minded, and ready to learn, raise your hand. Tell us a bit about your experience, your availability, and how soon you can start in Holland.By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You can unsubscribe from email or SMS messages by replying ‘stop' at any time. #IND8#Talroo8