Apprentice electrician jobs in Jonesboro, AR - 878 jobs

CompanyFederal Reserve Bank of Kansas CitySeeking a Master Electrician with project management experience to work in an owner-occupied facility. Candidate must be highly self-motivated and flexible in job assignments. Must be familiar with 13,200v primary distribution systems and 480v through 120v low voltage systems. Familiarity with medium voltage switchgear is required. Key Activities: Project Management/Coordination: Coordinates and provides leadership for all phases of various facilities-related projects performed by coworkers and outside contractors. These may include, but not to be limited to, construction projects involving building structure maintenance, electrical projects, pipefitting-related projects, or installation of new equipment and mechanical systems. Preventative Maintenance & Repairs: Perform routine, emergency, preventive maintenance and operational assignments relating to operation and/or maintenance of medium voltage distribution systems. Performs highly complex repair and maintenance of various systems and related equipment independently. Experience with medium voltage switchgear (13,200 volt) and double ended substations (480v) maintenance and service preferred. Experience with automatic transfer switches (480v), uninterrupted power supply (UPS), static transfer switches (STS). Inspect/monitor/troubleshoot building systems. Includes in-depth knowledge of specialized testing and diagnostic equipment to troubleshoot electrical related issues in a commercial or industrial setting. Customer Service/Work Requests: Communicates with customer, project manager or facilities support staff, as appropriate, regarding status of project or work requests. Works collaboratively with other trades and design/project management team. Training/Guidance: Provides guidance and training to other technicians and ensures minimal disruptions to daily operations during the facilities related projects. Provides guidance to technical staff in other trades on safe electrical work practices. Contract Development & Management: Provides input for developing RFPs where significant technical expertise in several areas is necessary. Budget: Collaborates with lead to develop project budgets and estimates. Qualifications: High school diploma or equivalent. Typically requires at least 5 years of relevant experience. A minimum of 3 years industry experience with a Master Electrician level - Kansas City Missouri license preferred with experience in commercial and/or industrial electrical work. Strong knowledge of NFPA 70E, electrical safety requirements, including arc flash personal safety requirements. Experience leading project teams, supervising contract work, and developing written work instructions. Experience with project estimating preferred. Good computer skills - proficient with Microsoft Office suite, internet application, email. Proficient at operating all computer equipment associated with assigned equipment or systems. Possess good writing and critical thinking skills. Must be able to originate instruction documents that can be used by other technicians to perform preventive maintenance or verify electrical system operation. Proficiency with floor plans and line drawings. Understanding of manufacturer's equipment manuals and operational instructions. Ability to multitask and use time efficiently to meet project deadlines. Team member with strong oral and written communication skills. Comfortable working on ladders and lifts. Ability to lift at least 50 lbs. Valid driver's license with acceptable driving record required. Additional Information: Location(s): Fully Onsite: Yes Location(s):Kansas City, MO Remote Only Eligible: No Salary: The starting pay range for this position is $71,600 to $87,600 for the job level(s) required for this position. Final offers are determined by factors including the candidate's qualifications, internal alignment considerations, district assignment, and geographic location. Work Shift: While the typical schedule for this position is anticipated to be 7:00 A.M. to 3:30 P.M. Monday through Friday, flexibility to adjust to different shifts is necessary. Some overtime is required when performing or overseeing the performance of preventive and predictive maintenance on electrical distribution equipment and in projects performed for internal customers. Sponsorship: Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future. About Us: Total Rewards & Benefits Who We Are What We Do Follow us on LinkedIn, Instagram, X (formerly Twitter), and YouTube Full Time / Part TimeFull time Regular / TemporaryRegularJob Exempt (Yes / No) NoJob CategoryFacilities/Real Estate Family GroupWork ShiftFirst (United States of America) The Federal Reserve Banks are committed to equal employment opportunity for employees and job applicants in compliance with applicable law and to an environment where employees are valued for their differences. Always verify and apply to jobs on Federal Reserve System Careers (FRS) or through verified Federal Reserve Bank social media channels. Privacy Notice

Arconic is currently in search of Electricians to join our Rolled Products North America (RPNA), business unit in Alcoa, TN. Arconic's Tennessee Operations, is one of the most modern aluminum fabricating facilities in the world. Our plants produce high-quality molten metal and aluminum sheet and are recognized as a world leader in the business. The facility has been located at the Foothills of the Great Smoky Mountains for 100 years and continues to thrive and grow. At Arconic, we are looking for people who share our values of integrity, inclusion, and diversity, and who demonstrate agility, results commitment, and the capability to grow themselves and others. In return, we offer the opportunity to Grow Together with ongoing opportunities for professional growth provided by a constantly changing environment, working alongside employees who value the people they work with just as much as the work they do. Responsibilities The Electrician will troubleshoot, repair, and maintain heavy industrial machinery and equipment with a working knowledge of AC/DC motors and controls, Programmable Logic, combustion, metering, air conditioning, power distribution (low and high voltage), conduit and schematics. Duties include, but are not limited to: Read electrical schematics to troubleshoot equipment. Create job kits for maintenance jobs including repairs, new equipment installation, and preventative maintenance. Perform preventative maintenance on production equipment. Ability to work at heights Adhere to all safety procedures and state and federal regulations. Operate a variety of hand and power tools, measuring devices, and test equipment. Hot Work Follow instructions and respond to management direction. Identify and resolve problems in a timely manner. Exercise strong communication skills and being a good team player. Maintain a safe and clean work environment. Provide improvement suggestions to increase quality, production, and safety. Qualifications Basic Qualifications High school graduate or GED 1+ year of electrical maintenance experience with a variety of areas, including AC/DC motors, electrical controls, programmable controllers, and 480v power distribution or Completion of a Department of Labor approved apprenticeship or Certificate from a post-secondary industrial maintenance or industrial electricity program Proficiency with basic computer applications such as Microsoft Word and Excel Successful candidate must pass Arconic Electrical Entrance Testing Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. Preferred Qualifications 3+ years electrical maintenance experience. Completion of an approved apprentice program or technical training. Associate or bachelor's degree in an applicable field. Knowledge of National Electric code. Experience with PLC's, combustion. Experience with Lean Manufacturing principles and applications. Strong communication skills, written and verbal. About Us Arconic Corporation is a leading provider of aluminum sheet, plate and extrusions, as well as innovative architectural products, that advance the automotive, aerospace, commercial transportation, industrial and building and construction markets. Building on more than a century of innovation, Arconic helps to transform the way we fly, drive, and build. We live our core values and commit to delivering sustainable value to our customers, our employees, our communities and our stakeholders. At Arconic, we: Act With Integrity : We lead with respect, honesty, transparency and accountability. Safeguard our Future : We protect and improve the health and safety of our employees, communities and environment. Grow Stronger Together : We cultivate an inclusive and diverse culture that advocates for equity. Earn Customer Loyalty : We build customer partnerships through best-in-class products and service. Drive Operational Excellence : We pursue continuous improvement through innovation, agility, people development and collaboration. Create Value : We achieve success by generating and growing value for our stakeholders. United States EEO Statement: Arconic Corporation is an equal opportunity employer. We take action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics. About the Team Tennessee Operations is located 3 hours North of Atlanta, GA; 2.5 hours East of Nashville, TN; and 4 hours West of Charlotte, NC. Arconic's Tennessee Operations is one of the most modern aluminum fabricating facilities in the world. Our plants produce high-quality molten metal and aluminum sheet and are recognized as a world leader in the business. The facility has been located at the Foothills of the Great Smoky Mountains for 100 years and continues to thrive and grow.

Boyd Gaming Corporation has been successful in gaming jurisdiction in which we operate in the United States and is one of the premier casino entertainment companies in the United States. Never content to rest upon our successes, we will continue to evolve and retain a position of leadership in our industry. Our past success, our current business philosophies and our sound business planning, combine to position Boyd Gaming Corporation to maximize value for our shareholders, our team members and our communities. Job Description Perform various tasks related to the installation and repair of wiring and electrical fixtures. Install control and distribution apparatus such as switches, relays, and circuit-breaker panels. Connect power cables to equipment. Rest continuity of circuit to ensure electrical compatibility and safety of components. Repair faulty equipment or systems. Maintain shop areas, spare parts areas, storage areas and inventories of materials, equipment and associated parts of the trade assigned. Follow all safety and OSHA requirements and building codes at all times. Qualifications Must be at least 21 years of age. Prior experience required. Must be able to identify all colors and use hand and power tools. Must be able to stand and walk for extended periods of time throughout shift. Must be able to climb ladders, bend, stoop, kneel, and work in confined spaces. May be exposed to extreme temperatures when working on exterior equipment or systems. Must have excellent communication skills. Proficient in the use of company computer programs to include email and ordering systems. Utilization of company work order system to start and complete work orders based on priority. Must be able to obtain/maintain any necessary licenses and/or certifications. Additional Information Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Prysmian is the world leader in the energy and telecom cable systems industry. Each year, the company manufactures thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video and data transmission for the telecommunication sector. We are 30,000 employees, across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us. Make Your Mark at Prysmian Group - Join Us Benefits Retention Bonus $3,000 $305 Annual Safety Shoe/Clothing Allowance Paid Leave available in first year 13 Paid Holidays Optional Uniforms Paid for by Company 6% 401k Company Match 3 Medical, Dental, and Vision Options Parental Leave Policy Prysmian Employee Discounts Accident Insurance Critical Illness Insurance Benefits effective day 1 Qualifications The electrician is expected to have mastered a wide variety of electrical/electronic fundamental skills Specifically he/she must demonstrate a competency in : DC drive theory, AC theory, use of national electrical code, blueprint reading, wiring and troubleshooting, math, power distribution 120/240 460-3 phase, relay logic, understand and uses all available electrical test equipment, control systems basics, troubleshooting PLC's, basic PC skills, conduit installation Job knowledge/skill, quality of work, production/work habits, attendance/punctuality, problem solving/initiative, team participation, integrity/attitude, safety/housekeeping Responsibilities Inspect, install, repair, maintain and troubleshoot electrical, electronic and associated control systems and power circuits, power generating equipment, switchgear and emergency systems Designs and/or redesign electronic, hydraulic and pneumatic control systems, power circuits and control circuits as assigned Rebuild and/or replace, lubricate and maintain large and small electric motors Maintain and install facility lighting systems Inspect and set safety switches Install, maintain and repair of low and medium voltage switchgear Troubleshoot and install programmable controllers and associated components Make visual inspections of plants operations ensuring that operational problems have been located and corrected Requisition parts and supplies and assist in the maintenance of spare parts inventory Maintain records and prepare regular and special reports on electrical and electronic systems; take and log a variety of readings from equipment Supply and maintain all hand tools needed for maintenance function Maintain communications with production and maintenance personnel for orderly execution of duties Observe all EHS rules and procedures Maintain an orderly and clean work area to assure a desirable and safe working environment Perform other related duties as per the direction of the Manager Prysmian, as an Equal Opportunity Employer, aims to attract and recruit individuals with diverse backgrounds, skills, and abilities. We strongly believe that diversity brings significant value at all levels of the organization, increasing the possibility of capturing market opportunities and maximizing value for our customers and stakeholders. With Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. All Managers and HRs in Prysmian are responsible for ensuring DE&I policies are respected during the recruiting process, as well as recognizing and mitigating unconscious biases that must not influence our selection processes. All persons will be considered for employment without regard to their race, ethnicity, religion, nationality, origin, citizenship status, socio-economic status, age, sex, gender identity or expression, sexual orientation, marital status, disability, military service or veteran status, pregnancy, parental leave, medical conditions, or any other characteristic protected by applicable federal, state or local laws. Prysmian will endeavor to make a reasonable accommodation for any disclosed physical or neurological condition or disability of a qualified applicant unless the accommodation would impose an undue hardship on the operation of our business. Visit our DE&I Page to learn more about Prysmian's commitments. Your application data will be treated according to our Data Protection Policy. If you believe you require assistance to complete this form or to participate in an interview, please contact us at [email protected]. English_formattedESQA508c.pdf

ELECTRICIAN (A) Team: 35 Electricians Entity: Ingalls Shipbuilding No Full-Time Shift: Multiple Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No We're building tomorrow's fleet today With more than 11,000 employees, HII's Ingalls Shipbuilding division is the largest manufacturing employer in Mississippi and a major contributor to the economic growth of Alabama. For nearly 85 years, we've designed, built and maintained amphibious ships, destroyers, and cutters for the U.S. Navy and the U.S. Coast Guard. The largest supplier of U.S. Navy surface combatants, we're simultaneously building four classes of ships and have pioneered the development and production of technologically advanced, highly capable ships for the surface Navy fleet for decades. Think that's cool? Keep reading: The Role Position Overview It's the Ingalls First-Class Electrician that brings our ships to life. Their work supplies power to the weapons and combat systems, which in turn keep our military and our nation safe. Does that sound like an interesting way to make a great living? Then a rewarding career as an Electrician at Ingalls Shipbuilding, "America's Shipyard" and Mississippi's largest private employer is waiting for you. Since 1938, Ingalls workforce has done their part in helping our nation by constructing nearly 70 percent of our US Navy's fleet of ships. If you possess the talent, skill, ability or even the willingness to learn, perhaps you have what it takes to become a valued team member. Job Description An Ingalls First-Class Electrician also called a Electrical Journeyman, is responsible for the layout, installation and repair of shipboard cables, lighting, and electronic equipment, as well as the ships power. Electricians utilize an assortment of hand and power tools, a variety of test equipment along with a working knowledge of blue prints, drawings and schematics. Ingalls shipyard production areas at times involve working at different heights, confined spaces, different weather conditions as well as multiple shifts 24 hours a day. As with most every position in the shipyard, an Electrician may be required to work either day or night dependent upon the number of ships under construction at any one point in time. Ingalls stresses the practice of working safely in all situations with safety procedures meeting, and most times, exceeding industry standards. Must Have Minimum 4 Ç Yrs. experience in the commercial, industrial or marine electrical field High School Diploma or Equivalent Read and interpret marine drawings and/or blueprints utilizing both metric and standard measurements Nice to Have One (1) year shipboard experience (sonar, radar, power, internal communication, navigation, etc.). Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to ...@hii-co .com and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call 1-844-###-#### for assistance. Press #1 for Ingalls Shipbuilding.

Job Summary/Overview Installs and repairs electrical, mechanical, and electronic systems and components of industrial machinery and equipment by performing the following duties: Essential Duties and Responsibilities Installs power supply wiring and conduit for newly installed machines and equipment such as robots, conveyors, and programmable controllers. Connects power supply wires to machines and equipment and connects cables and wires between machines and equipment. Diagnoses malfunctioning devices such as transformers, motors, and lighting fixtures and replaces damaged or broken wires and cables. Tests malfunctioning machinery and equipment and discusses malfunction with other maintenance associates and equipment service techs, to diagnose malfunction and develop repair plan. Replaces faulty electrical components of machine such as relays, switches, and motors, and positions sensing devices. Diagnoses and repairs or replaces faulty electronic components, such as printed circuit boards. Replaces electric motor bearings and rewires motors. Operates PLC and CNC programmable controlled equipment to program automated machinery, to test for malfunctions, and to verify repairs. Plans layout of wiring and installs wiring, conduit, and electrical equipment for building installation and repairs to meet or exceed the NEC standards. Diagnoses and replaces faulty mechanical, hydraulic, and pneumatic components of machines and equipment. Knowledge, Skills, Competencies, and Abilities Ability to maintain confidentiality; problem solver; self-motivated starter. Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Ability to read and understand electronic and electrical designs and apply that knowledge to repair and maintain equipment and building electrical system. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Ability be able to use computer to research and recommend replacement parts for equipment and facility. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Required Qualifications Four year certificate from college or technical school; or two-three related experience and/or training in electronics / electrical / mechanical maintenance; or equivalent combination of education and experience. Must be able to work alone or as a member of a team. About Columbus McKinnon: Columbus McKinnon is a leading worldwide designer, manufacturer and marketer of intelligent motion solutions that move the world forward and improve lives by efficiently and ergonomically moving, lifting, positioning and securing materials. Key products include hoists, crane components, precision conveyor systems, rigging tools, light rail workstations and digital power and motion control systems. We are focused on commercial and industrial applications that require the safety and quality provided by our superior design and engineering know-how. Columbus McKinnon is a publicly traded company that has been in business for almost 150 years - proud of our heritage, where we come from, and where we're going. As Columbus McKinnon grows globally, so does our need for driven and inspired employees. Join our winning team! Columbus McKinnon Corporation promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all associates and work hard to maintain a Drug Free Workplace. Nearest Major Market: Chattanooga

Boyd Gaming Corporation has been successful in gaming jurisdiction in which we operate in the United States and is one of the premier casino entertainment companies in the United States. Never content to rest upon our successes, we will continue to evolve and retain a position of leadership in our industry. Our past success, our current business philosophies and our sound business planning, combine to position Boyd Gaming Corporation to maximize value for our shareholders, our team members and our communities. Job Description Must be at least 21 years of age. Prior experience required. Must be able to identify all colors and use hand and power tools. Must be able to stand and walk for extended periods of time throughout shift. Must be able to climb ladders, bend, stoop, kneel, and work in confined spaces. May be exposed to extreme temperatures when working on exterior equipment or systems. Must have excellent communication skills. Must be able to Additional Information Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Inspire health. Serve with compassion. Be the difference. Repairs and maintains electrical systems, motor control centers, panel boards, and other electrical and mechanical equipment. Essential Functions All team members are expected to be knowledgeable and compliant with Prisma Health's values: Inspire health. Serve with compassion. Be the difference. Tests and maintains the emergency generators and emergency power systems on a weekly basis and documents all test results. Repairs and maintains fire alarm and fire sprinkler systems. Performs scheduled tests to comply with JCAHO, DHEC, and other standards. Attends training to achieve 90% attendance as required by JCAHO. Performs preventive maintenance on assigned equipment and records appropriately. Detects repairs necessary, implements repair request and recommends PM frequency changes, additions, deletions to PM schedule. Repairs nurse call systems, surgical lights, automatic door controls, and food service equipment. Mounts motors, transformers, and lighting fixtures into position and completed circuits according to diagram specifications. Maintains, installs, replaces, and tests electrical circuits, equipment and appliances using appropriate tools and testing instruments. Performs other duties as assigned. Minimum Requirements Education - High School diploma or equivalent OR post-high school diploma/highest degree earned Experience - Five (5) years of electrical experience In Lieu Of NA Required Certifications, Registrations, Licenses Master or Journeyman License - Preferred Knowledge, Skills and Abilities Working knowledge of electrical coding requirements. Knowledge of office equipment (fax/copier) Proficient computer skills (word processing) Mathematical skills Effective at data conversion Capable of assisting with other engineering trades such as mechanical and maintenance technicians. Participate or is a member of professional organizations within the field preferred Work Shift Day (United States of America) Location Blount Memorial Hospital Facility 8001 Blount Memorial Hospital, Inc. Department 80018300 Plant Operations Share your talent with us! Our vision is simple: to transform healthcare for the benefits of the communities we serve. The transformation of healthcare requires talented individuals in every role here at Prisma Health.

Employment Status: Hourly Full-Time Function: Manufacturing Pay Grade and Range: USXX - Grade USXX Hourly 40 $23.41 - $33.45 Bonus Plan: OIP Target Bonus: 5.0 Hiring Manager: Clinton Travis Mckenzie Recruiter: Crystal Denise Dishman Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Job Requirements Position Summary: Intermediate level integrated systems electrical assembly knowledge and ability. The following are duties and responsibilities required of and Integration Electrician II. It is understood that some of these duties and responsibilities will require assistance from more senior electricians. However, it is expected that the Integration Electrician II will strive to learn and gain experience in order to master these duties and responsibilities. Role qualifications: • High school diploma/GED • 3 years or more related experience Job Responsibilities • Checks for parts when missing or due • Properly fill out non-conformance sheet for modifications performed during assembly • Locate CAD drawings for the electrical assembly process • Trains Electrical Integration Tech I when requested • Must be able to read and prepare drawings or follow blueprints/schematics to determine the location of wiring and equipment and to ensure conformance to building and safety codes • Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, as well as to ensure compliance with codes • Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices such as ohmmeters, voltmeters, and oscilloscopes in order to ensure compatibility and safety of the system • Takes inventory, orders, and restocks items when assigned • Cross-trains with other departments as assigned • Connect wires to circuit breakers, transformers, or other components • Construct and fabricate parts, using hand tools and according to specifications • Maintains an effective preventive maintenance system • Maintains plant quality and safety requirements • Completes assigned work efficiently and per Tennessee Rand Standard Operating Procedures (SOPs) and Work Instructions (WI) • Assists in troubleshooting and correcting electrical problems in a fast-paced environment and conveys information to engineers to update or redesign equipment • Works in a team performing work orders and providing technical support • Records all maintenance activities, repairs and ensures all required materials and/or parts are available, prepared and organized as necessary to optimize manufacturing operations • Tracks and develops electrical maintenance work • Confers with team leads to identify or prevent potential problems and work through to resolution • Travels to customer locations to reassemble cells • Performs electrical rebuilds as required • May assist in estimating time required to complete the required tasks • Coordinates work with customer contacts to verify drop locations, hot work permits and other off-site requirements • Complete required tasks by project specific dates • Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and test lamps. • Work from ladders, scaffolds, and boom truck • Maintain or repair electrical wiring, equipment, and fixtures • Run wires through conduit • Test or repair electrical based equipment • Work closely with engineers and contractors • Be knowledgeable of OSHA codes and requirements • Be aware of safety and proper lifting and transporting heavy and oversize loads • Be aware of automated equipment and its inherent dangers • Be proactive in continuous improvement methods • Maintain orderliness and cleanliness in the maintenance of equipment. • Follow directions and ensure a safe and high quality product and production environment • Have good verbal and written communication skills • Maintain a skills inventory score indicative of a level II or higher technician Essential Skills and Experience • Measurement skills (measuring tape, calipers, etc.) • Hand/power tool knowledge • Intermediate-Advanced Mechanical ability • Work requires at least 2 years in electrical construction or maintenance, which may include time in an approved apprenticeship program, or an equivalent combination of relevant education and experience. • Some industrial electrical experience and troubleshooting in both electrical circuitry and PLC is a requirement. • Preventative maintenance experience is recommended • Experience with robotic equipment is recommended • Willing to travel to customers' sites • Demonstrate concern for safety on project of crew and others • Intermediate-Advanced knowledge of electrical components used in automation • A general knowledge of the Quality Program Manual • A general knowledge of WI-43 • A general knowledge of Tennessee-Rand Equipment Build Standards • A general knowledge of Tennessee-Rand Technical Guidelines • A general knowledge of industrial drives, AC-DC power, electrical instrumentation, • DCS, industrial controls/DCS, DCS/PLC, control valves, blueprint schematic reading, • AC/DC schematics, electrical PLC, and general schematic layouts. Environmental Health and Safety • Understand the Company's EHS Policy and how it relates to this job. • Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. • Work in a safe and environmentally friendly manner and observe all company EHS procedures. • Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. • Attend required EHS training Physical demands and work environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Physical demands: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. • Work environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts and high voltages. The noise level in the work environment is usually moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

At Dow, we believe in putting people first and we're passionate about delivering integrity, respect and safety to our customers, our employees and the planet. Our people are at the heart of our solutions. They reflect the communities we live in and the world where we do business. Their diversity is our strength. We're a community of relentless problem solvers that offers the daily opportunity to contribute with your perspective, transform industries and shape the future. Our purpose is simple - to deliver a sustainable future for the world through science and collaboration. If you're looking for a challenge and meaningful role, you're in the right place. About You and this role We are seeking candidates for exciting and rewarding Process Technician Apprenticeship opportunities available at our facility in Knoxville, TN within the U.S. Apprenticeship Program. As part of the U.S. Apprenticeship Program, Apprentices participate in a 2-3 year program offering hands-on work experience in our chemical plants while attending community college to earn a company-paid Associate's degree. During the program, Apprentices will be offered paid tuition, wages, and some benefits. Upon successful completion of the program, Apprentices will have earned an Associate's Degree in one of several technical disciplines. Apprentices will report to an Apprenticeship Program Leader who will support the Apprentice throughout the apprenticeship program. Apprentices who successfully complete the program will also be highly considered for a job within the company. Individuals selected to fill an available Apprentice opening will be required to sign an offer letter that will commit them to working for Dow for 2 years upon being offered a full-time position. The hourly rate of pay for this role will be at least $22.62. The exact pay rate will be communicated if you are chosen to receive an offer of employment. The hourly pay rate is set by the Company and is non-negotiable. Expected hire date for these opportunities is June 8th, 2026; but it could go onto August 3rd, 2026 at the latest. Responsibilities Process Technician Process Technicians operate equipment in assigned areas of the plant and perform operations related activities per the work process. They utilize chemical manufacturing knowledge and experience to operate and troubleshoot the plant in a safe and efficient manner. Primary Responsibilities and Key Skills Routine operation of basic control systems and devices to monitor levels, temperatures, pressures and flow rates, and transfer of products. Controlling, monitoring and adjustment of all control systems and manually operated equipment. Properly lifting hoses, bolt flanges and operate valves and similar equipment including the proper clearing and isolation of equipment. Following operating discipline, procedures, and practices to ensure a safe and efficient operation of assigned duties. Troubleshoot process, product quality, safety, and environmental problems, and identify equipment requiring maintenance. How to perform maintenance and project work safely and efficiently. Clearing and tagging equipment as required and issuing Safe Work Permits for maintenance and project work. Performing all duties with a high degree of dedication to safety and environmental stewardship. Qualifications Educational Requirements A minimum of a High School Diploma or GED is required. Individuals who are currently enrolled in high school or college or have graduated or received a GED within the last two years will be required to provide official transcripts/GED scores prior to being invited to an onsite interview. Must have completed Algebra or Technical Math and Science coursework in High School, per graduation requirements. Completion of Chemistry and / or Physics coursework in High School is preferred. After an offer of employment, but prior to date of hire, must complete college entrance exams / assessments at the community college to be attended. Must not be required to take any remedial or transitional coursework. If already enrolled in the degree program related to the field you applied for or have credits that would transfer toward it, individual must have no less than 2 full semesters remaining toward the applicable degree. Preferred educational qualification: minimum GPA of 2.500 out of 4.000 if you are currently enrolled in high school or college OR you have graduated from high school or college or obtained a GED within the last 2 years Additional Requirements Must be 18 years or older on or before your start date. Must have a current, valid US driver's license or the ability to obtain prior to your start date. Please note that before being cleared to report to work, you will be required to successfully complete a Motor Vehicle Records check to verify the status of your driver's license. Be able to work all applicable shifts on a rotating basis (including weekends & holidays) and work overtime, when needed. A minimum requirement for this U.S. based position is the ability to work legally in the United States. No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process. Preferred Skills Active Learning: Demonstrate a strong willingness to learn and actively participate in training programs to gain a thorough understanding of manufacturing processes, safety protocols, and quality standards. Time Management: Effectively manage time to ensure completion of tasks and upholding to production schedules, while maintaining high standards of quality and safety. Enthusiasm for Learning: Proactively seek opportunities to learn new skills and improve existing ones, demonstrating initiative and a commitment to continuous improvement in manufacturing processes and techniques. Troubleshooting (Problem-Solving): Skills in identifying and resolving processes, product quality, safety, and environmental issues. Mechanical Aptitude: Ability in handling equipment and performing maintenance tasks. Environment Health and Safety: Commitment to performing duties safely and with environmental responsibility. Communication: Coordinating with co-workers and other team members effectively. Physical Demands Willing and able to meet physical demands of the job, with or without reasonable accommodations: Lift 50 pounds, lift hoses, bolt flanges and operate valves and similar equipment routinely. Climb ladders/stairs and work at heights. Work in tight or closed-in spaces. Must be able to wear and use personal protective equipment (PPE), including harnesses with a total weight capacity of 300lbs. Work comfortably and safely at elevated heights. Candidates must be familiar with, or willing to undergo training in, the proper usage and maintenance of safety equipment to ensure safe movement and operations at heights. Additional Notes: Relocation assistance is not provided. About Dow Dow (NYSE: DOW) is one of the world's leading materials science companies, serving customers in high-growth markets such as packaging, infrastructure, mobility and consumer applications. Our global breadth, asset integration and scale, focused innovation, leading business positions and commitment to sustainability enable us to achieve profitable growth and help deliver a sustainable future. We operate manufacturing sites in 30 countries and employ approximately 36,000 people. Dow delivered sales of approximately $43 billion in 2024. References to Dow or the Company mean Dow Inc. and its subsidiaries. Learn more about us and our ambition to be the most innovative, customer-centric, inclusive and sustainable materials science company in the world by visiting ************ As part of our dedication to inclusion, Dow is committed to equal opportunities in employment. We encourage every employee to bring their whole self to work each day to not only deliver more value, but also have a more fulfilling career. Further information regarding Dow's equal opportunities is available on ************ Dow is an Equal Employment Opportunity employer and is committed to providing opportunities without regard for race, color, religion, sex, including pregnancy, sexual orientation, or gender identity, national origin, age, disability and genetic information, including family medical history. We are also committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may call us at 1-833-My Dow HR (833-###-####) and select option 8.

Job Title: Electrician A General Function The Electrician installs and repairs wiring, fixtures, and equipment for all electrical services aboard vessels and within the facility. Typical Duties and Responsibilities The following statements are intended to describe the general nature and level of work being performed. They are not an exhaustive list of all responsibilities: • Interpret and follow blueprints, schematics, and wiring diagrams. • Install conduit to bulkheads using brackets and screws, then thread wires through conduit to terminals such as connection boxes, circuit breakers, voltage regulators, and switch panels. • Connect power-supply circuits to systems including radio, radar, sonar, fire control, and other onboard electronic equipment. • Test electrical characteristics-such as voltage, resistance, and phase angle-within circuits using meters and indicators. • Construct and install instrument panels using hand tools, rulers, dividers, and power drills according to specifications. Knowledge, Skills, and Abilities • Ability to read and interpret blueprints, drawings, and electrical schematics is preferred. • Strong understanding of marine or industrial electrical systems and components. Experience and Training • Prior experience as an electrician is required. • Experience in an industrial or shipyard environment is strongly preferred. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

A Day In The Life Troubleshooting & Planning: Assess equipment issues, determine replacement needs, and develop logical, efficient repair plans. Electrical Systems: Read and interpret wiring diagrams, schematics, and technical drawings to install, repair, calibrate, and service a wide range of electronic devices and systems. Equipment Operation: Start up and shut down machinery in accordance with company safety protocols. Installation & Maintenance: Install, adjust, and repair electrical distribution systems, motors, switches, heating/cooling controls, gauges, PLCs, and other electrical components used in both production and office environments. Voltage Versatility: Work with various voltage levels as directed by the Maintenance Supervisor. Blueprint Proficiency: Execute tasks based on blueprints, sketches, and verbal instructions. Tool & Equipment Operation: Operate forklifts, cranes, hand tools, saws, drills, and other equipment as needed. What will help you thrive in this role? Physical Capability: Lift 60-80 lbs manually for loading/unloading parts, setting up equipment, and other tasks. Lift 50 lbs from floor to waist and vice versa. Stand for extended periods with standard break intervals. Sensory & Motor Skills: Full use of both hands. Ability to walk, hear, and see to perform essential job functions safely and effectively. Mental & Emotional Endurance: Perform repetitive tasks with focus and consistency. Understand and follow safety procedures and job requirements. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Successful candidates must reside or be willing to relocate at their own expense to live within 30 minutes of headquarters. Position will be filled as an Apprentice Lineman or Lineman depending on the qualifications, experience and skills of the successful candidate. This position will report to Laurel, MS. This position will be covered by the Memorandum of Agreement between Mississippi Power and the International Brotherhood of Electrical Workers Job Summary This position will be filled as a Journeyman Lineman or Apprentice Lineman depending on the applicant's qualifications. This position is responsible for working in a line crew on overhead and underground construction and maintenance of distribution systems. This position is responsible for responding to and correcting problems with the electrical distribution system during normal working hours, after hours, nights, weekends and holidays. Job Responsibilities Candidate must safely perform any work normally or reasonably required in this classification. This position builds, maintains, inspects, trouble-shoots, replaces, and repairs distribution power lines, poles, and related equipment according to Company specifications and manufacturer's recommendations. Successful candidate will review work orders and determine material needed to complete jobs; along with being able to safely load wire coils, poles, equipment, and materials onto trucks. Candidate is responsible for using hand tools to assemble materials, connectors, brackets, and other equipment in preparation for installation on pole-lines or underground systems. This position frequently works aerially from a ladder, lift bucket, and pole-climbing tools to remove/replace/repair equipment. Successful candidate must climb utility poles and other structures. This position is responsible for cleaning and maintaining tools/trucks. Successful candidate must maintain regular attendance and comply with all safety procedures, practices and requirements. Candidate must be able to effectively communicate in person, by radio, and by phone to various company personnel in the normal course of duties. If this position is filled as an apprentice, the applicant will complete a prescribed Journeyman Development Program. Job Requirements Must pass or have passed the Construction and Skills Trade Test (CAST) in order to be considered Must currently have or possess the ability to obtain a valid Mississippi Commercial Drivers license within 6 months of employment Must maintain weight to comply with equipment manufacturer's restrictions Must be available for call out overtime work, scheduled overtime work, and overnight travel as needed Availability for timely response to call outs are required The successful applicant must currently live within or be willing to relocate to within a 30 minute commute from the assigned headquarters office. No relocation assistance available. Knowledge, Skills & Abilities Candidates should have a comprehensive knowledge of customer relation skills and the ability to think clearly and make logical decisions under pressure. Average or above average computer skills are desired. Working knowledge of electricity and the maintenance of electrical lines is necessary. Ability to operate machinery and vehicles, use basic hand tools, the ability to work at heights, climb tall structures, read blueprints, lift, carry and pull heavy objects. Ability to work in extreme weather conditions and work in enclosed, dark areas Work methods must adhere to all safe work practices and must possess the ability to build solid interpersonal relationships with other employees Other Requirements In order for the applicant to be hired as a journeyman lineman, 5 years distribution line crew experience is preferred. Behavioral Attributes Exhibit Our Values behaviors of safety first, unquestionable trust, superior performance, and total commitment. Ability to work successfully in a team atmosphere. Successful candidate must be ethical, customer oriented, self-motivated, a continuous learner and highly dependable. Other Please submit an updated resume with your application If you are selected to take the CAST test required for this position, you will be notified via e-mail.

Job Description United Electric Cooperative, Inc. in Maryville, MO is looking to hire a full-time Lineman, Apprentice OR full-time Lineman, Journeyman. Would you like to work for a company that will value your contributions? If so, please read on! This position is a Union position and earns a competitive wage of $39.54/hour for Lineman, Apprentice or $48.33/hour for Lineman, Journeyman. We provide fantastic benefits, including health, dental, vision, life insurance, long-term disability, short-term disability, and tuition reimbursement. We also offer a 401(k) match and pension program after the first year of employment. If this sounds like the right opportunity for you, apply today! ABOUT UNITED ELECTRIC COOPERATIVE United Electric Cooperative is a rural electric cooperative owned by the members we serve and governed by a board of directors. United Electric serves over 9,800 meters across NW Missouri and SW Iowa and has approximately 3,600 miles of distribution lines. The board of directors and employees of United Electric Cooperative are committed to improving the quality of life for our member-owners. Our mission statement is to "enhance the rural way of life through United". Keeping our members and communities connected is something we take pride in! We have a team of skilled employees who consistently strive to provide a top-quality member experience. United offers a great benefits package, plenty of opportunities for growth and advancement, and an uplifting work environment in which all of our employees can thrive! WORK SCHEDULE This full-time position works Monday through Friday and follows a Collective Bargaining Agreement with the IBEW Local 1464 Union that defines working hours for summer and winter. This position includes mandatory "Crew on Watch" duty as assigned. Overtime and holiday shifts are required in the event of an outage or emergency. This position is required to work outside in inclement weather at any time. The applicant who is chosen for this position must reside within 25 road miles of the reporting shop location. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this customer service job, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Job Posted by ApplicantPro

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Production Supervisor Your role and responsibilities In this role, you will have the opportunity to support the Maintenance team. Each day, you will conduct activities according to agreed maintenance guidelines and procedures. You will also showcase your expertise by increasing the overall efficiency of the equipment and production line. You will be mainly accountable for: Responding to emergencies/breakdowns. Completing preventative maintenance tasks and logging them within a digital CMMS system. Reporting all recurring problems with machinery and equipment. Outlining problems with parts that can be identified and addressed for record-keeping. Setting calibration and adjusting equipment, machinery, and instruments to comply with production specifications and instructions. Qualifications for the role High school diploma or General Education Degree (GED). A minimum of four to six years of mechanical experience and/or a state license, or equivalent combination of education and experience. One year certificate from college or technical school and/or a state license. More about us We value people from different backgrounds. Apply today for your next career step within ABB and visit *********** to learn about the impact of our solutions across the globe. #MyABBStory We look forward to receiving your application. If you want to discover more about ABB, take another look at our website ***********. Equal Employment Opportunity and Affirmative Action at ABB ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. This position works 10 hour shifts Monday - Thursday, with OT as needed to meet customer demand. * This is a Safety Sensitive position under the Arkansas Medical Marijuana Amendment of 2016. We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

Must pass pre-employment background and Physical Work Schedule 5 8 Hr Days Long Term No PEr Diem SUMMARY - Helpers (includes 0 months -- 42 months) -- Preferred minimum of 6 months documented field experience in chose craft discipline. Must have ability to read and interpret instructions and documentation. Plan, layout, install, and repair wiring, conduit, electrical fixtures, apparatus and control equipment. RESPONSIBILITIES - Prepares sketches showing location of wiring and equipment or follows diagrams or blueprints insuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. - Measures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders. - Pulls wiring through conduit, assisted by helper. - Splices wires by stripping insulation from terminal leads with knife or pliers, twisting or soldering wires together and applying tape or terminal caps. - Connects wiring to lighting fixtures and power equipment using hand tools. - Installs control and distribution apparatus, such as switches, relays and circuit- breaker panels, and fastens in place with crews or bolts using hand or power tools. - Connects power cables to equipment and installs grounding leads. - Test continuity of circuit to insure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope. - Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement. - Disassembles and repairs defective electrical equipment or systems. - Load, transport and unload material, tools, equipment and supplies. - Maintains tools and equipment. - Be able to distinguish colors. - Knowledge of certain procedures such as LOTO, etc. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

U. S. Steel is committed to fostering an inclusive workplace culture and celebrate the diversity of our employees. Objective of the Job: This position is an industrial electrician responsible for maintaining and troubleshooting a wide range of equipment in the Melt Shop area of Big River Steel facility. Duties and Responsibilities: 1) Ensure Safety, Environmental, Quality requirements and “where applicable” ResponsibleSteel requirements are followed. 2) Repair complex electrical equipment, including automated machines, controls, panels, relays, circuit breakers, communication systems, VFD drives 3) Install electrical equipment with minimal instruction after general assignment 4) Diagnose problems, replace, or repair defective equipment 5) Troubleshoot and repair complex hydraulic problems 6) Work with production to help develop and maintain a highly productive Melt-Shop Qualifications : 1) Demonstrated safety focus and willingness to proactively apply it in a team environment 2) Quality and detail oriented with strong technical and analytical problem-solving skills 3) Adaptability to accept changes in job duties and eagerness to learn and apply new knowledge 4) Reliable team player with good communication skills 5) Highly motivated, self-directed, and willing to put in extra hours when needed 6) Minimum 5 years of work experience as an industrial electrician preferred 7) Previous experience with NFPA 70E practices 8) Familiar with common electrical tools and measuring instruments 9) Experience reading electrical, hydraulic, and pneumatic schematics 10) Strong working knowledge of 480-volt 3 phase electrical distribution systems and motor control 11) Basic PLC programing experience (Allen Bradley preferred) 12) HS diploma or equivalent is required; electrical degree or training is preferred Working Conditions and Physical Requirements: The environment is typical for a steel mill production areas, with extreme temperatures, high noise levels, and dusty/greasy areas. Physically demanding work will be required in the production environment. Typical work hours are four 12-hour shifts, which rotate days and nights. This results in working some weekends/holidays and overtime. Supervisory Responsibility: This position does not supervise others.

This position is an industrial electrician responsible for maintaining and troubleshooting a wide range of equipment in the Coated Products area of Big River Steel facility. Duties and Responsibilities: Troubleshoot, repair, and perform preventative maintenance on complex electrical equipment, including PLCs, control circuits, communication systems, I/O field devices, and VFD drives/motors Install or modify electrical equipment following electrical code, manuals, schematic diagrams, and other specifications with minimal instruction after general assignment Use Electrical Ingenuity and Work directly with all mechanics and operations personnel in a fast-paced environment to help develop a safety focused and productive Coated Products Team. Support maintenance teammates to help maintain a positive and efficient work environment focused on safety and reliability. Qualifications: Demonstrated safety focus and willingness to proactively apply it in a team environment Quality and detail oriented with strong technical and analytical problem solving skills Adaptability to accept changes in job duties and eagerness to learn and apply new knowledge Reliable team player with good communication skills Highly motivated, self-directed, and willing to put in extra hours when needed Demonstrated proficiency using precision measuring instruments Experienced with mobile equipment. ( Rough Terrain, Man Lift, Fork Lift Carry Deck or Broaderson) Efficient in the Metric Measuring System a plus Basic computer skills; MS Excel, Word, and Outlook is a plus Read Electrical drawings, blueprints, diagrams and schematic drawings to determine work procedures Knowledgeable of programming and troubleshooting logic to include ladder logic, function block programming Knowledgeable of VFDs, principle design, programming, and trouble shooting skills; I.O. systems and design layout; three-phase motors and ability to troubleshoot; network infrastructure; basic mechanical components in a mill; basic Hydraulic systems, how they operate and design layout Willing to learn and take on multiple roles, such as mechanical and production positions as well as continually improve on primary skill set HS diploma or equivalent is required; electrical degree or training is preferred Working Conditions and Physical Requirements: Environment is typical for a steel mill production areas, with extreme temperatures, high noise levels, and dusty/ greasy areas. Physically demanding work will be required in the production environment. Typical work hours are four 12 hour shifts, which rotate days and nights. This results in working some weekends/holidays and overtime.

About Us Southern Electric Corporation a Quanta Services, Inc. (NYSE:PWR) company, is an electrical utility contractor specializing in the construction of high-voltage transmission lines, underground, and distribution lines as well as providing emergency restoration services. A proven leader in the industry since 1985, SEC has earned a reputation of providing superior work with a strong focus on customer satisfaction and safety. We currently manage over 100 crews and nearly 2,000 pieces of late model equipment. Customers include investor-owned utilities, electric cooperatives, and municipalities throughout our work footprint. Our team is our family. We are 100% committed to the safety of our team members and providing industry leading training. We believe we can be the last job you ever want to apply for. Call us family! About this Role This is a job for anyone looking to come to work with SEC doing Underground residental work. Driving Commercial vehicles. Trouble shooting UG pad mount transformers. All other things involved with UG work. What You'll Do Pullin wire laying pipe terminating elbows splice box trouble shooting transformers NEEDS to have a Commerical Drivers License What You'll Bring Hand tools Any other tools you have pertaining to Underground What You'll Get Medical Dental Vision 401K Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.