Assembler jobs in Sturgis, MI

Final Finish Assembly 2 is responsible for making sure that all wires and floors/decks are properly installed per standards. Essential Job Functions * Able to read and use a tape measure efficiently * Knowledge of band saws * Knowledge of air tools and hand tools such as screw guns, drills, sanders, and jack * Possess basic computer skills Non-essential Job Functions * Willingness to learn new tasks * Communicate well with others * Organize work area

Final Finish Assembly 2 is responsible for making sure that all wires and floors/decks are properly installed per standards. **Essential Job Functions** * Able to read and use a tape measure efficiently * Knowledge of band saws * Knowledge of air tools and hand tools such as screw guns, drills, sanders, and jack * Possess basic computer skills **Non-essential Job Functions** * Willingness to learn new tasks * Communicate well with others * Organize work area **Requirements** * Work inside, in tight spots, and without air conditioning * Able to stand and walk around all day * Stooping, kneeling, crouching, crawling and bending frequently * Must be able to lift and handle up to 50 pounds of material **Other Skills/Abilities** * Ability to be cross trained **PPE Requirements** * Safety glasses * Gloves * Knee pads Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled

The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Frame, layout and build floors Prepare, layout and build walls Layout, run and install electrical lines, switches, receptacles and panels/breaker boxes Install and prepare dry for finish tape, mud and texture Complete roof construction, decking, flashing and shingling Cabinet and or finish carpentry and trim, build and installation Installation of siding, windows and doors Painting of interior and exterior of homes Cooperate and promote a team concept with all other company employees Adhere to all rules and regulations, at all times Meet or exceed company safety standards Perform other tasks as assigned by management Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Must have good attendance. Working conditions: Continuous exposure to heat, cold, noise, and working outdoors. Must wear protective equipment while at the location Physical requirements: Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees as well as function safely around construction equipment Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

Job Details Western Headquarters - South Bend, IN Full Time None $11.00 Hourly None Day ManufacturingDescription Job Objective: To contribute to the smooth and timely execution of assembly and packaging operations within a fast-paced industrial production environment. This role is committed to maintaining high standards of accuracy, efficiency, and safety while supporting team goals and ensuring that all assigned tasks are completed correctly and in accordance with company procedures and quality standards . This position reports to the Industrial Services Lead Supervisor who evaluates performance annually. In addition, embodies the Goodwill Mission to: “Empower people to achieve their most abundant life” and upholds the Company Core Values of: Relentless Pursuit of Excellence, Customer-First Mindset, Humble Confidence, Passion for Mission, and Do the Right Thing. Essential Job Functions: Learn and apply standard production methods and quality procedures to perform tasks such as assembly, rework, packaging, mailing, and inspection within the Industrial Services Department. Follow instructions to ensure work meets quality and efficiency standards. Wear required personal protective equipment (PPE) and follow all safety protocols. Other duties as assigned by supervisor. Qualifications Required Education and Skills: Willingness and ability to learn procedures for a variety of light industrial tasks. Proficient hand-eye coordination and fine motor skills. Ability to perform basic counting and simple math tasks. Capable of visually identifying details and differences in materials or products. Able to maintain consistent work output to meet production goals. Comfortable using small hand tools safely and effectively. Physically able to remain seated or stand for extended periods (up to 4 hours). Qualifications: Authorized to work in the United States. Flexible availability. Able to frequently bend, twist, reach above shoulder level, push and pull, crouch or stoop, kneel, repetitively use feet, and use head and neck in a twisting or static motion and to look up and/or down, and lift and/or move up to 50 lbs.

Job Description Embark on a journey where your dedication shapes the future of mobility and comfort. As an Assembly Associate in Battle Creek, you're not just a part of the process; you're at the heart of innovation, creating thermal components that enhance the driving experience worldwide.We're hiring for a beacon of manufacturing excellence, renowned for their thermal products that serve every major carmaker, heavy-duty manufacturer, and the automotive aftermarket. Their expansive facilities in Battle Creek reflect their commitment to innovation and quality, producing air conditioning and engine cooling systems that are integral to vehicles across the globe.In this dynamic role, you'll be responsible for assembling and manufacturing thermal components that are essential for automotive comfort and performance. Whether handling assembly duties or operating sophisticated machinery, your reliability, eagerness to learn, and dedication to quality will define your success.We Offer the position of Assembly Associate: Competitive pay ranges: •1st shift: Pay range of $18.58 to $19.33 •2nd shift: Pay range of $20.58 to $21.33 •3rd shift: $19.58/hr Full-time opportunities across 1st, 2nd, and 3rd shifts, offering flexibility and stability. Overtime opportunities to boost your earnings. A $100 referral bonus for introducing friends to our team. Comprehensive benefits and advancement opportunities once you're hired. Qualifications for this role include: 1+ year(s) of experience in manufacturing, light industrial, or assembly roles, preferred but not required. A knack for precision and a keen eye for detail, ensuring every component meets our stringent quality standards. Familiarity with assembly tools, such as electric air-drivers, demonstrating your technical prowess. A robust work ethic and a commitment to safety, embodying our dedication to excellence and well-being. The ability to lift up to 35 pounds and perform tasks involving bending, twisting, and gripping, showcasing your physical dexterity. Must Be Able to Speak, Write, and Read basic English, ensuring effective communication within our diverse team. No high school diploma? We provide an on-site GED program to support your continuous growth. Join us in Battle Creek and be part of a team that's driving the future of automotive technology. Apply now to start your journey with a company where every day is an opportunity to excel and innovate.By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time. IND3

Unleash the Power of Multi-Mission Excellence: Safeguarding the Seas for the World's Navies. Step into a world where cutting-edge technology meets unparalleled expertise. Ultra Maritime pioneers delivering multi-mission solutions that protect and empower the naval forces worldwide. With our extensive portfolio of capabilities, our innovations are utilized on naval fleets across our allied navies around the globe. As the maritime and underwater battlespace evolves, we tirelessly push the boundaries to develop advanced specialist systems that provide our 'five-eyes' Defense customers with an unbeatable warfighting edge. From surface vessels to sub-surface operations and unmanned platforms, we are revolutionizing the way naval missions are executed. We thrive on collaboration and partnering with our customers to ensure mission success. Our expert solutions encompass an array of game-changing technologies, including state-of-the-art sonar, radar, and expendables. Join us in shaping the future of naval warfare and together, we will safeguard the seas and empower navies worldwide! Be part of a team producing advanced defense products that protect our nation and allies worldwide. In this role, you'll work hands-on with a variety of hand and power tools to assemble and sub-assemble critical components, learning the craft through on-the-job training that builds your expertise. This is more than just assembly. It's precision, teamwork, and innovation in action. You'll contribute directly to high-quality, mission-critical products while growing your skills in a supportive, team-oriented environment where your work truly matters. Monday - Thursday 5:30am-3:30pm. Possible OT Fridays Starting Pay $19.90, Raise at 6 months $20.40, Raise at 12 months $21.00 Nationality Requirements Candidates must be eligible to obtain the relevant security clearance required for the role, due to the nature of the programmes we deliver for our customers. Job Description What does Ultra Maritime have to offer you? * Climate controlled, well-lit and clean work environment! * Work/life balance that includes 3.5 weeks PTO * Up to 3 Floating Holidays * 8 Paid Holidays * 401k Plan with Company matching * Educational Assistance Program (Tuition Reimbursement) * Wellness Program and incentives * Company HSA contributions * Company FSA contributions * On-Site Fitness Center * Health and Welfare Insurance Benefits that start 1st of month following hire * Potential for Annual Bonus * No waiting period for Holiday Pay or PTO use Company-Paid Benefits: * $75 monthly Student loan payment * Basic Life Insurance * Basic Accidental Death and Dismemberment (AD&D) Insurance * Short Term Disability * Long Term Disability * Employee Assistance Program (EAP) Voluntary Employee-Paid Benefits: * Medical and Prescription insurance * Dental insurance * Vision insurance * Supplemental Life Insurance Plans * Supplemental AD&D insurance for Employee and Family * Accident Plan * Critical Illness Plan * Hospital Indemnity Plan * Pet Insurance * Identity Theft Education and Experience Requirements: * 1+ years of warehouse, assembly, or manufacturing experience preferred. * HS Diploma or GED preferred but not required. * Due to U.S. government contract requirements, candidates must be U.S. citizens, U.S. permanent residents, or otherwise legally authorized to obtain the necessary government approvals. Skills and Qualifications: * Ability to read and follow written instructions in English. * Good mechanical aptitude and manual dexterity. * Ability to distinguish component colors and wiring (color vision required). * Proficient in using hand tools and small parts assembly. * Basic math skills and attention to detail. * Strong work ethic and ability to meet production goals. * Must be able to communicate effectively with team members and follow instructions, with or without reasonable accommodation * Work well with others in team setting * Ability to cross train and rotate jobs often Physical Requirements: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Ability to stand for extended periods (up to 12 hours per shift). * Regular movement may include :Frequent bending, stretching, lifting, walking, and repetitive motion. * Ability to lift and move objects up to: * 10 lbs regularly * 25 lbs frequently * 50 lbs occasionally * Requires use of hands for fine motor tasks and assembly. * Ability to move throughout the facility and work in various positions (kneeling, crouching, reaching, etc.). * Visual abilities include close vision, peripheral vision, depth perception, and focus adjustment. Work Environment: * Work is performed in a temperature-controlled manufacturing environment. * Frequent collaboration in a team-based setting. * Occasional exposure (10%-33%) to noise, dust, chemicals, and machinery. * Job involves repetitive tasks, concentration on small components, and hand/eye coordination. #MAR #li-kp1 #li-onsite Diverse & Inclusive Employer Ultra Maritime is a proud Equal Opportunity Employer committed to fostering a respectful, and diverse workplace. We welcome applicants from all backgrounds and do not tolerate discrimination of any kind. Employment decisions are made without regard to race, color, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, age, national origin, ancestry, ethnicity, marital status, disability, genetic information, protected veteran status, citizenship status, or any other characteristic protected by applicable federal, state, or local laws. As a defense contractor, we are dedicated to maintaining the highest standards of integrity and security. We operate a drug-free workplace and, where permitted by law, conduct pre-employment background checks and substance abuse screening. We offer competitive benefits including medical, dental, vision, 401k match, paid time off and family leave, and much more! Reasonable accommodation statement: if you need an accommodation for any part of the application process, please email ************************ Company: Ultra Maritime

Job DescriptionCustom Fabricator Kalamazoo, MI Full-Time | 1st Shift 6am-4:30pm Monday-Friday Pay: $18/hr Job Responsibilities Fabricate custom metal components for HVAC systems using hand tools, power tools, and fabrication equipment. Read and interpret blueprints, drawings, and specifications to ensure accurate fabrication. Perform cutting, bending, forming, welding, grinding, and assembly of sheet metal and structural components. Operate equipment such as shears, press brakes, saws, drills, welders, and CNC fabrication machinery. Inspect completed parts for accuracy, quality, and conformance to customer requirements. Assist in assembling HVAC units, ductwork, frames, and specialty components as needed. Work collaboratively with engineering and production to troubleshoot and resolve fabrication challenges. Maintain accurate documentation, production records, and quality checks. Follow all safety and PPE requirements while maintaining a clean and organized work area. Qualifications Previous experience in metal fabrication, custom manufacturing, or HVAC equipment manufacturing required. Ability to read and interpret blueprints, schematics, and technical drawings. Skilled in welding (MIG/TIG), grinding, cutting, and metal finishing techniques. Experience operating fabrication tools such as press brakes, shears, and hand tools. Strong attention to detail and commitment to producing high-quality work. Ability to lift up to 50 lbs, stand throughout the shift, and work in a production environment. Strong problem-solving skills and ability to work independently or as part of a team. #TSTRATHP

Job Description Benefits Medical Insurance (PPO + HDHP options) Dental Insurance Vision Insurance Critical Illness Insurance Accident Insurance Supplemental Life Insurance (Employee, Spouse and Children) 401(k) contribution after 30 days + company match on first 3% Weekly Accrued PTO Company Paid Short Term and Long Term Disability Company Paid Life Insurance Job Summary: Assembly team members are responsible for assembling quality trailer with outstanding service in a safe manner and must be able to manufacture in a fast paced, team-oriented environment while maintaining a clean and organized work area. Essential Functions: Ensure your own safety by always using designated personal protective equipment (PPE) and tools designed and rated for the task, complying with safety regulations and maintaining a clean and organized workspace. Report to work on time to support production startup and throughput goals. Operate all power tools and machinery on the assembly line effectively and respectfully. Read and understand work orders and work instructions. Perform quality checks and product inspections by completing final inspection sheets, as directed by assigned production supervisor. Perform daily inspections on equipment prior to shift startup to ensure the safety of you and your coworkers, as well as the operational effectiveness of equipment. Axle, wire, deck, and inspect trailers, as assigned by production supervisor. Assist in other areas and perform other duties, as needed. (This is not intended to be a comprehensive list of activities, duties, or responsibilities required for this job.) Qualifications and Requirements High School Diploma / GED, or equivalent demonstrated skills and abilities in directly job-related experiences. Possess good physical stamina and coordination with the ability to safely lift 80 pounds with prolonged periods of standing. Able to work 10 hour shifts with potential overtime. Willing to submit a pre-employment background check. Able to work in a self-directed way to manage multiple demands of time and attention in a fast-paced manufacturing environment. ************* Novae LLC provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Novae LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Assembly, fast paced, very clean Qualifications Entry level Additional Information Pay is 10.00 an hour and a no commitment tour is required.

Benefits Medical Insurance (PPO + HDHP options) Dental Insurance Vision Insurance Critical Illness Insurance Accident Insurance Supplemental Life Insurance (Employee, Spouse and Children) 401(k) contribution after 30 days + company match on first 3% Weekly Accrued PTO Company Paid Short Term and Long Term Disability Company Paid Life Insurance Job Summary: Assembly team members are responsible for assembling quality trailer with outstanding service in a safe manner and must be able to manufacture in a fast paced, team-oriented environment while maintaining a clean and organized work area. Essential Functions: Ensure your own safety by always using designated personal protective equipment (PPE) and tools designed and rated for the task, complying with safety regulations and maintaining a clean and organized workspace. Report to work on time to support production startup and throughput goals. Operate all power tools and machinery on the assembly line effectively and respectfully. Read and understand work orders and work instructions. Perform quality checks and product inspections by completing final inspection sheets, as directed by assigned production supervisor. Perform daily inspections on equipment prior to shift startup to ensure the safety of you and your coworkers, as well as the operational effectiveness of equipment. Axle, wire, deck, and inspect trailers, as assigned by production supervisor. Assist in other areas and perform other duties, as needed. (This is not intended to be a comprehensive list of activities, duties, or responsibilities required for this job.) Qualifications and Requirements High School Diploma / GED, or equivalent demonstrated skills and abilities in directly job-related experiences. Possess good physical stamina and coordination with the ability to safely lift 80 pounds with prolonged periods of standing. Able to work 10 hour shifts with potential overtime. Willing to submit a pre-employment background check. Able to work in a self-directed way to manage multiple demands of time and attention in a fast-paced manufacturing environment. ************* Novae LLC provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Novae LLC complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Kelly Services, Inc. is a Fortune 500 company headquartered in Troy, Mich., providing employment to more than 700,000 employees annually, with skills including office services, accounting, engineering, information technology, law, science, marketing, light industrial, education, health care and home care. Kelly Services is an Equal Opportunity Employer. Job Description For 60 years, Kelly Services has provided outstanding employment opportunities to the most talented individuals in the marketplace. Today, we are proud to offer a long term contract Assembler position for DENSO located in Battle Creek, MI. Position Description: FP1 POSITIONS: Fast paced assembly with rate ratio that varies from 7 seconds in a machine operation environment. Could be assembling an HVAC unit while it moves down a conveyor assembly line. Assembling includes insertion of servo motors, heater cores and evaporators. Associates are assembling while the part is moving. Individuals must be able to work in a fast paced assembly setting while working with air drivers, torch drivers as well as working with small parts. Knowledge of Kazan or Japanese theory/theology is not needed but aides in one's success. FP2 POSITIONS: These areas are mostly machining areas while the machine does most of the work but the associates are assembling small parts to condenser, evaporators, heater cores before cycling the machines. Although the areas are not as fast, the amount of parts and/or additions to the materials listed above can be from 10 to15 pieces. Qualifications For 60 years, Kelly Services has provided outstanding employment opportunities to the most talented individuals in the marketplace. Today, we are proud to offer a long term contract Assembler position for DENSO located in Battle Creek, MI. Position Description: FP1 POSITIONS: Fast paced assembly with rate ratio that varies from 7 seconds in a machine operation environment. Could be assembling an HVAC unit while it moves down a conveyor assembly line. Assembling includes insertion of servo motors, heater cores and evaporators. Associates are assembling while the part is moving. Individuals must be able to work in a fast paced assembly setting while working with air drivers, torch drivers as well as working with small parts. Knowledge of Kazan or Japanese theory/theology is not needed but aides in one's success. FP2 POSITIONS: These areas are mostly machining areas while the machine does most of the work but the associates are assembling small parts to condenser, evaporators, heater cores before cycling the machines. Although the areas are not as fast, the amount of parts and/or additions to the materials listed above can be from 10 to15 pieces. Additional Information This position is recruited for by a remote Kelly office, not your local Kelly branch. To be considered for this position, you must submit your resume. Due to the high volume of responses anticipated only qualified candidates will be contacted.

Job Description · Work effectively in a team environment · Must be able to perform all work allocated · Must be able to work from blueprints, process sheets and/or instructions. · Must be able to read a tape measure and have basic math skills. · Must be able to work with minimum supervision Need 1 person with Light Welding experienence. Need 1 person with PDI experience. Need 1 Person with Lamination experience. Requirements · Experience with general assembly · Experience working in a manufacturing environment · Computer and organizational skills · Goal orientated and motivation to achieve tasks within set timelines · Previous experience with 5S and lean manufacturing would be considered an asset. · Time management and thoroughness PHYSICAL ACTIVITY/ REQUIREMENTS: This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing all day. Must be able to lift and/or move items over 25 pounds. $19.50 to start Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability

Monday-Thursday 6am-4:30pm- $14/HRAir conditioned Crimping and Soldering Expertise- Proficient in using crimping tools and soldering techniques to ensure strong, reliable wire connections. Wire Cutting and Stripping-skilled in accurately cutting and stripping wires to the precise lengths and specifications and required for harness assembly. Cable Termination Knowledge- Familiarity with various types of cable terminations, including lugging splicing, and applying connectors. Reading and Interpreting Schematics- Ability to read and follow electrical schematics, wiring diagrams, and technical drawings for proper assembly. Harness Layout and Assembly- Experience in routing, bundling, and securing wire harnesses according to design specifications. Quality Control and Testing-Competence in inspecting wire assemblies for defects, continuity testing, and verifying compliance with industry standards. Tool and Machinery Operation-Familiarity with wire processing equipment such as automated cutters, strippers, crimpers, and testing machines. Attention to Electrical Safety- Strong understanding of safety practices related to handling and processing wires and cables, ensuring compliance with safety regulations. #Kendallville

Job DescriptionDescription: Wire Harness Technician We are seeking a detail-oriented and skilled Wire Harness Technician to join our manufacturing team. This role offers an excellent opportunity to contribute to the production of high-quality electrical assemblies in a dynamic and innovative environment. If you have a strong background in wiring and harness assembly, we encourage you to apply and become part of our growing organization. Key Responsibilities: - Assemble wire harnesses according to technical specifications and blueprints - Interpret wiring diagrams, schematics, and work orders to ensure accurate assembly - Cut, strip, and crimp wires and connectors with precision - Inspect completed harnesses for quality, accuracy, and safety standards - Maintain a clean and organized work area to ensure safety and efficiency - Collaborate with engineering and quality teams to resolve assembly issues Requirements: - Proven experience in wire harness assembly or related electrical manufacturing roles - Ability to read and interpret electrical schematics and technical drawings - Proficiency with hand tools, crimping tools, and wire cutting equipment - Strong attention to detail and quality standards - Good manual dexterity and hand-eye coordination - Basic understanding of electrical safety procedures - Ability to work independently and as part of a team - High school diploma or equivalent; technical training or certification is a plus

What We Do FOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network. Fox Factory Holding Corp. is the holding company of FOX Factory, Inc. and is publicly traded (FOXF) on Nasdaq. Why you should join us Not only do we provide competitive wages, you will also have access to great benefits and employee discounts. But more importantly, it's a fun environment where we truly enjoy working as a team and bringing great products to our customers! If this sounds like something you would love to do, and a place you want to be a part of, get in touch with us by submitting your application. We look forward to hearing from you! Position Summary: Uses hand and power tools to assemble trucks and truck parts. Position Responsibilities: * Ascertains work assignments and procedures. * Rotates through all tasks in the production process. * Fabricates, assembles and disassembles manufactured products by hand. * Converses with engineering and manufacturing personnel. * Ensures compliance with federal and state laws. * Performs quality checks. * Maintains a clean and safe work environment. * Repairs and maintains facilities as necessary. Specific Knowledge, Skills or Abilities Required: * Meticulous attention to detail * Ability to read and understand blueprints and schematics * Ability to work independently and as a team Position Qualifications: Education: * HS diploma or equivalent required Experience: * 1+ years of relevant manufacturing experience required Work Environment and Physical Requirements: * Manufacturing Environment * Lift up to 50 lbs. regularly * Requires walking, standing, bending and lifting for long periods of time * Vision abilities required to validate and enter data on computer Disclaimer: This list does not represent all physical demands. Descriptions are representative of those that must be met by employee to successfully perform the essential functions of the job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the jobs' essential functions. Note: FOX provides equal employment opportunities for all employees and applicants for employment without regard to race, color, ancestry, national origin, gender, gender identity, sexual orientation, marital status, religion, age, physical disability (including HIV and AIDS), mental disability, results of genetic testing, or service in the military, or any other characteristic protected by the laws or regulations of any jurisdiction in which we operate. We base all employment decisions -including recruitment, selection, training, compensation, benefits, discipline, promotions, transfers, layoffs, terminations and social/recreational programs - on merit and the principles of equal employment opportunity. Fox offers an excellent compensation package and wide-ranging opportunities for professional development. Medical, Dental, Vision, Health Spending and Dependent Care Savings Accounts, Disability and Life Insurance benefit programs are available, as is a 401k plan with employer matching. Eligibility for all benefit programs is defined by the applicable plan document or employee handbook.

Job Overview: 3rd Shift - $17.25 + $1.00 Premium Pay The responsibility of the Trim/ Assembly is to produce various products to efficiency and quality standards. Duties and Responsibilities * Ensure that all necessary information and tools required for each job are in place before work begins. * Pull and review Work Instructions prior to starting a job. * Bundles product properly after trimming and move to required staging location. * Complete all assigned projects by the due date. * Review production priorities. * Must meet or exceed all training requirements including those related to quality standards and attend scheduled shift meetings or other meetings required. * Meets or exceeds production targets. * Produces trimmed products using various methods designated for the job. These methods include, but not limited to: o Use of hand and power tools. * Inspects product for conformance to quality standards. Knowledge, Skills and Abilities * Good communication skills. * Good organizational skills. * Supervision Abilities. * Ability to read and write proficiently in English. * Ability to use hand and power tools. * Basic computer skills. * Ability to read a tape measure and calipers. * Other duties as assigned. Education and Experience * 1-2 years' experience in manufacturing preferred Working Conditions Title Vac Trim/Assembly FLSA Status Non-Exempt Department Manufacturing/Operations Platform Roto Molding Reports To Production Supervisor Grade Revise Date 2/06/2025 Able to work in a hot humid environment for extended periods of time. This job is in a typical manufacturing environment, to include, but not limited to: * Ovens and rotating tools * Forklifts and other moving machinery * Loud work environment Physical Requirements * Must be able to remain stationary with intermediate walking throughout the shift. Frequently lift parts weighing up to 50 pounds alone and parts more than 50 pounds with assistance and must be able to transport these up to 20 feet. * Frequently positions self to maneuver around the parts, materials, and molds. Must be able to operate the hand and tools and write legible.

Unleash the Power of Multi-Mission Excellence: Safeguarding the Seas for the World's Navies. Step into a world where cutting-edge technology meets unparalleled expertise. Ultra Maritime pioneers delivering multi-mission solutions that protect and empower the naval forces worldwide. With our extensive portfolio of capabilities, our innovations are utilized on naval fleets across our allied navies around the globe. As the maritime and underwater battlespace evolves, we tirelessly push the boundaries to develop advanced specialist systems that provide our 'five-eyes' Defense customers with an unbeatable warfighting edge. From surface vessels to sub-surface operations and unmanned platforms, we are revolutionizing the way naval missions are executed. We thrive on collaboration and partnering with our customers to ensure mission success. Our expert solutions encompass an array of game-changing technologies, including state-of-the-art sonar, radar, and expendables. Join us in shaping the future of naval warfare and together, we will safeguard the seas and empower navies worldwide! Ultra Maritime is the first qualified provider for the latest generation of sonobuoys for the United States Navy. We are world leaders in a wide array of ASW products and systems from sonobuoys to sonars to countermeasures and more. Join us in shaping the future of naval warfare and together, we will safeguard the seas and empower navies worldwide! Nationality Requirements Candidates must be eligible to obtain the relevant security clearance required for the role, due to the nature of the programmes we deliver for our customers. Job Description This role is responsible for the manufacture, integration and test of a wide range of products and systems providing innovative capabilities for our customers. This position requires an individual that embraces and promotes our companies three core values: Integrity, Transparency and Alignment Integrity: Excellence, in all we do and how we do it Transparency: Truth, trust and open communication Alignment: One company, setting goals and meeting commitments Working under the guidance of a supervisor, the assembly role within Ultra assembles and wires difficult and complex assemblies using detailed work instructions. They may test, fault find and identify issues in order to meet our customer commitments. Ultra Maritime is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, gender identity, sexual orientation, age, marital status, or disability status and welcome applications from all candidates. Nationality Requirements: Candidates must be eligible to obtain the relevant security clearance required for the role, due to the nature of the programs we deliver to our customers. Job Type: Full-time Pay: $19.90 per hour; increases at 6 & 12 months Expected hours: 40 per week (overtime on Fridays) Benefits: Annual bonus opportunity for all employees Benefits that start at 1st of the month following date of hire Full benefit package including Medical, Dental, and Vision insurance Company paid life and AD&D Insurance with optional supplemental life Company paid short term disability benefits with optional LTD available 401K with a company match 4 weeks of accrued PTO Tuition reimbursement AND payment contribution toward student loans 8 paid holidays with up to 3 floating holidays annually Clean & airconditioned work environment Schedule: 4 - 10 hour days Monday to Thursday Overtime on Fridays Work Location: In person #MAR #LI-ONSITE #LI-ZN1 Diverse & Inclusive Employer Ultra Maritime is a proud Equal Opportunity Employer committed to fostering a respectful, and diverse workplace. We welcome applicants from all backgrounds and do not tolerate discrimination of any kind. Employment decisions are made without regard to race, color, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, age, national origin, ancestry, ethnicity, marital status, disability, genetic information, protected veteran status, citizenship status, or any other characteristic protected by applicable federal, state, or local laws. As a defense contractor, we are dedicated to maintaining the highest standards of integrity and security. We operate a drug-free workplace and, where permitted by law, conduct pre-employment background checks and substance abuse screening. We offer competitive benefits including medical, dental, vision, 401k match, paid time off and family leave, and much more! Reasonable accommodation statement: if you need an accommodation for any part of the application process, please email ************************ Company: Ultra Maritime

Kelly Services, Inc. is a Fortune 500 company headquartered in Troy, Mich., providing employment to more than 700,000 employees annually, with skills including office services, accounting, engineering, information technology, law, science, marketing, light industrial, education, health care and home care. Kelly Services is an Equal Opportunity Employer. Job Description For 60 years, Kelly Services has provided outstanding employment opportunities to the most talented individuals in the marketplace. Today, we are proud to offer a long term contract Assembler position for DENSO located in Battle Creek, MI. Position Description: FP1 POSITIONS: Fast paced assembly with rate ratio that varies from 7 seconds in a machine operation environment. Could be assembling an HVAC unit while it moves down a conveyor assembly line. Assembling includes insertion of servo motors, heater cores and evaporators. Associates are assembling while the part is moving. Individuals must be able to work in a fast paced assembly setting while working with air drivers, torch drivers as well as working with small parts. Knowledge of Kazan or Japanese theory/theology is not needed but aides in one's success. FP2 POSITIONS: These areas are mostly machining areas while the machine does most of the work but the associates are assembling small parts to condenser, evaporators, heater cores before cycling the machines. Although the areas are not as fast, the amount of parts and/or additions to the materials listed above can be from 10 to15 pieces. Qualifications For 60 years, Kelly Services has provided outstanding employment opportunities to the most talented individuals in the marketplace. Today, we are proud to offer a long term contract Assembler position for DENSO located in Battle Creek, MI. Position Description: FP1 POSITIONS: Fast paced assembly with rate ratio that varies from 7 seconds in a machine operation environment. Could be assembling an HVAC unit while it moves down a conveyor assembly line. Assembling includes insertion of servo motors, heater cores and evaporators. Associates are assembling while the part is moving. Individuals must be able to work in a fast paced assembly setting while working with air drivers, torch drivers as well as working with small parts. Knowledge of Kazan or Japanese theory/theology is not needed but aides in one's success. FP2 POSITIONS: These areas are mostly machining areas while the machine does most of the work but the associates are assembling small parts to condenser, evaporators, heater cores before cycling the machines. Although the areas are not as fast, the amount of parts and/or additions to the materials listed above can be from 10 to15 pieces. Additional Information This position is recruited for by a remote Kelly office, not your local Kelly branch. To be considered for this position, you must submit your resume. Due to the high volume of responses anticipated only qualified candidates will be contacted.

Production Associate Monday-Friday- 6am-2pm overtime required$15/HR SUMMARYPerform production responsibilities in a safe manner to ensure the highest level of quality which meets quality standards and perform to meet efficiency ESSENTIAL FUNCTIONS Operate within Standard Operating Procedures (SOPs) and Job Safety Analysis (JSAs) Work safely by wearing all required safety equipment Read, understand, utilize prints Ensure that expected quality standards are fully supported; responsible for maintaining quality standards Maintain a clean and safe work area (5S methodology) throughout the shift Responsible to meet production requirements and standards Effectively communicate with fellow Associates, Supervisors, and all other key Staff. Participate in continual improvements activities Perform various production processes as assigned Other duties as assigned. ADDITIONAL RESPONSIBILITIES Drive quality in the process Report any quality related issues to the supervisor Report supply use, to the supervisor, to ensure that inventory levels are accurate KNOWLEDGE AND SKILL REQUIREMENTS Basic reading, writing, and arithmetic skills required; this is normally acquired through a high school diploma or equivalent Manual dexterity required for operating machinery Ability to lift up to 50 pounds required WORKING CONDITIONSWorking conditions are normal for a manufacturing environment; Work involves lifting of materials and product up to 50 pounds; Machinery operation requires the use of safety equipment to include but not limited to; eye safety glasses, hearing protectors. #AngolaForm # 09-21-10 Rev. Original