Chemist jobs in Abilene, TX

Details Department: Invasive Cardiology Schedule:Mon- Fri 0700-1530 NO weekend except for emergent on call cases. Call shifts 10-12 days / month 1530-0630 Mon -Fri 0630-0630 Sat-Sun Hospital: Ascension Seton Cedar Park Medical Center Location: Cedar Park, Texas Benefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Responsibilities Assist with procedures to analyze, diagnose and treat the cardiovascular system. Perform active physiological monitoring of heart rate, rhythm, pressures, and saturations. Anticipate changes during cases that indicate necessary information, such as catheter position. Accurately identify and communicate patient condition changes to the physician and team. Routinely perform patient testing and/or monitoring to include oxygen saturation, cardiac output, shunting, hemodynamic calculations and other intra-procedure testing and resulting as applicable. Demonstrate knowledge and variation of procedures, including the equipment/supplies used for performance. Demonstrate proper handling, preparation, and maintain asepsis. Anticipate and adapt to physician and case needs. Assist with room setup, patient transport and post-procedure clean-up. Ensure infection control and sharp safety procedures are followed regarding waste and reusable products. Perform patient education regarding post-procedure monitoring and care of catheter insertion site. Provide instructions and information regarding activity including normal, variant and issues requiring intervention. Requirements Licensure / Certification / Registration: BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted. One or more of the following required: Registered Cardiovascular Invasive Specialist credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date. Cardiographic Tech specializing in Electrophysiology credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date. Advanced Life Support preferred. American Heart Association or American Red Cross accepted. Pediatric Advanced Life Support preferred. American Heart Association or American Red Cross accepted. Education: High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. Additional Preferences #CathLabTech Why Join Our Team Ascension Seton, based in Austin, Texas, has provided thousands of associates and caregivers a rewarding career in healthcare since 1902. Ascension Seton operates more than 100 clinical locations in Central Texas and four teaching hospitals, including Dell Seton Medical Center at The University of Texas and Dell Children's Medical Center. Join us and create a career path you will love. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Equal Employment Opportunity Employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish) poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Pay Non-Discrimination Notice Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

Expedia Technology teams partner with our Product teams to create innovative products, services, and tools to deliver high-quality experiences for travelers, partners, and our employees. A singular technology platform powered by data and machine learning provides secure, differentiated, and personalized experiences that drive loyalty and traveler satisfaction. Who We Are: Travel is a force for good. At Expedia Group (Expedia, Hotels.com, Vrbo, Travelocity, Orbitz, Wotif, and others), our mission is to power global travel for everyone, everywhere-because we know that travel strengthens connections, broadens horizons, and bridges divides. Powered by more than 80+ terabytes of data and 20+ years of tech innovation, Expedia Group is one of the world's largest travel platforms. With unrivaled knowledge of the industry and advanced technology, we've built a marketplace that filters through millions of possibilities for travelers and partners worldwide. About the Team: The Marketplace Machine Learning Science team is launching a high-impact initiative focused on Customer Lifetime Value (CLV)-a key business metric that will shape long-term company performance and executive decision-making. As a Machine Learning Scientist III, you will lead efforts to build causal models and experimentation frameworks that optimize how we serve millions of travelers globally. This is a high-visibility role with direct exposure to executive leadership and cross-functional teams across product, engineering, marketing, customer service, pricing, and more. You'll be joining a zero-to-one initiative with strong leadership support and urgency to deliver impact starting immediately. Strategic Impact & Visibility: This role offers a rare opportunity to shape how Expedia Group measures and optimizes long-term customer value. You'll be part of a newly formed team with zero existing members on CLV, giving you the chance to influence foundational modeling decisions and build scalable solutions from the ground up. In this role, you will: Lead the research and implementation of scalable machine learning and data science solutions end-to-end with engineering rigor Apply causal inference techniques to understand drivers of customer lifetime value and measure the impact of business interventions (e.g., marketing, service, product features) Design and execute robust experiments (e.g., A/B tests, quasi-experimental methods) to evaluate business strategies and validate model performance Translate complex findings into actionable insights for both technical and non-technical stakeholders Break down ambiguous business problems into structured, data-driven solutions Stay informed on relevant ML and AI research, with support from Expedia's learning and development resources Collaborate with other machine learning and data science teams to foster a strong data science culture across Expedia Group Minimum Qualifications: Advanced degree in Computer Science, Statistics, Operations Research, Econometrics, Economics, or a related quantitative field Typically requires 4+ years of professional experience, though candidates with equivalent project or research experience are encouraged to apply Strong hands-on experience in causal modeling and experimental design Proven ability to analyze large, complex datasets and generate actionable insights Pragmatic problem solver focused on scalable and effective methods Ability to share ideas effectively with diverse technical and business audiences Preferred Qualifications: Proficiency in Python; familiarity with Spark is a plus but not required - eagerness to learn is valued Experience with end-to-end ML solution development Experience or interest in applying AI techniques, including large language models (LLMs), is a plus

Southend Pharmacy, part of Allia Health Group, is expanding our research and product development efforts to support a growing portfolio of innovative compounded medications. Our R&D team plays a central role in developing new formulations with a focus on precision, quality, and patient safety. Job Summary We are seeking a skilled and detail-oriented Research & Development Compounding Technician to support the preparation of experimental sterile and non-sterile formulations. This role is hands-on and highly collaborative, working directly with pharmacists and product developers on new formulations, product testing, and controlled documentation. The ideal candidate brings strong compounding experience, comfort with lab equipment, and the ability to maintain a clean, compliant laboratory environment. Key Responsibilities Formulation & Compounding ●Prepare sterile and non-sterile research formulations including capsules, creams, ointments, suspensions, solutions, injectables, and syrups. ● Weigh, measure, and mix ingredients using precise technique and calibrated lab equipment. ● Perform potency calculations and assist with formulation trials or process improvements. Product Testing & Documentation ●Support stability studies, compatibility assessments, and basic analytical tests (pH, viscosity, density, particle size). ●Document research batches, maintain lab notebooks, label samples, and ensure accurate tracking of materials. ●Assist in updating SOPs, formulation worksheets, and project-related documents. Laboratory Operations ● Clean, maintain, and calibrate equipment such as capsule machines, mixers, homogenizers, and balances. ● Manage ingredient inventory, monitor supply levels, and request ordering when needed. ● Maintain a safe, organized, and compliant R&D workspace. ● Experience with picnometers and viscometers preferred per hiring manager intake. Cross-Functional Collaboration ● Work closely with pharmacists, QA, and product development teams on ongoing projects. ● Provide observations during formulation trials and support preparations for pilot-scale batches. Required Qualifications ● Pharmacy technician certification ●2+ years of sterile and non-sterile compounding experience (strong 1-1.5+ year candidates considered) ● Familiarity with USP , , and ● Strong knowledge of pharmaceutical calculations and compounding techniques ● Excellent documentation skills and adherence to controlled procedures ● Ability to follow detailed technical instructions and operate lab equipment safely Preferred Qualifications ● Experience in a 503A or 503B compounding environment ● R&D or formula development experience ● Exposure to GMP, GLP, or FDA-regulated settings ● Analytical testing experience (refractometry, pH, viscosity, density) Physical Requirements ● Ability to stand for extended periods, lift laboratory materials, and handle chemicals and equipment safely Compensation & Benefits ●Hourly Range: $25.00 - $30.00, based on experience ● Full medical, dental, vision insurance ● 401(k) with employer contribution ● Paid time off and paid holidays ● Professional development opportunities across Allia Health Group Southend Pharmacy is unable to offer visa sponsorship at this time. Candidates must be legally authorized to work in the United States without current or future sponsorship. Equal Opportunity Employer Statement Allia Health Group is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you have any questions or require accommodations during the application process, please contact *************************.

Introduction Experience the HCA Healthcare difference where colleagues are trusted, valued members of our healthcare team. Grow your career with an organization committed to delivering respectful, compassionate care, and where the unique and intrinsic worth of each individual is recognized. Submit your application for our Cardiac Cath Lab Tech Lead opening with HCA Houston Healthcare Northwest today and find out what it truly means to be a part of the HCA Healthcare team. Benefits HCA Houston Healthcare Northwest, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation. Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more. Free counseling services and resources for emotional, physical and financial wellbeing 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service) Employee Stock Purchase Plan with 10% off HCA Healthcare stock Family support through fertility and family building benefits with Progyny and adoption assistance. Referral services for child, elder and pet care, home and auto repair, event planning and more Consumer discounts through Abenity and Consumer Discounts Retirement readiness, rollover assistance services and preferred banking partnerships Education assistance (tuition, student loan, certification support, dependent scholarships) Colleague recognition program Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence) Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Learn more about Employee Benefits Note: Eligibility for benefits may vary by location. We are seeking a(an) Cardiac Cath Lab Tech Lead for our team to ensure that we continue to provide all patients with high quality, efficient care. Did you get into our industry for these reasons? We are an amazing team that works hard to support each other and are seeking a phenomenal addition like you who feels patient care is as meaningful as we do. We want you to apply! Job Summary and Qualifications We are seeking a Cardiac Cath Lab Radiology Technologist Lead for our facility to ensure that we continue to provide all patients with high quality, efficient care. We are an amazing team that works hard to support each other and we are seeking a phenomenal addition like you who feels patient care is as meaningful as we do. We want you to apply now! What You Will Do In Your Role: You will be responsible for assisting the R.N. in assessing, planning, implementing, and evaluating the care of the Cath Lab patient. You will be responsible to function in a call-out situation by scrubbing and running the table (x-ray). You will ensure archiving and storage of digital data and maintains proper operation of image review stations. You will perform post processing manipulation of digital data to supply physician with additional clinical data. You will be able to function in a Code Blue situation. What qualifications you will need: 1 year of experience in the field or in a related area Prior Cath Lab experience preferred Graduate of accredited school of Radiologic Technology required ARRT and Radiology Technologist through the Texas Department of Health or RCIS certification required. Current BCLS certification from the American Heart Association required. ACLS certification within 6 months of employment HCA Houston Healthcare Northwest is a 415+ bed acute care hospital that has been serving the north Houston communities for more than 40 years, providing a wide range of medical services including cardiology, maternity care, Level III NICU, pediatrics, bariatrics and neurology. We comprehensively serve our community by employing expert physicians, specialists, nurses and support staff who work together as a unified team to offer a range of diagnostic treatment and support services. From our 24-hour emergency department with Level II Trauma capabilities, to women's services, to cardiology, we are dedicated to improving the health of our community by delivering exceptional, personalized healthcare. We are members of HCA Houston Healthcare, the most comprehensive family of hospitals in the region and part of the leading provider of healthcare in the country, HCA Healthcare. Together we are stronger, smarter and more accessible in providing the patient-centered care you need close to home. HCA Healthcare has been recognized as one of the World's Most Ethical Companies by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "Across HCA Healthcare's more than 2,000 sites of care, our nurses and colleagues have a positive impact on patients, communities and healthcare. Together, we uplift and elevate our purpose to give people a healthier tomorrow."- Jane Englebright, PhD, RN CENP, FAAN Senior Vice President and Chief Nursing Executive If you find this opportunity compelling, we encourage you to apply for our Cardiac Cath Lab Tech Lead opening. We promptly review all applications. Highly qualified candidates will be directly contacted by a member of our team. We are interviewing apply today! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Cath Lab Tech - Rowlett, TX Pay : $66k -$96k Guaranteed hours : 40 Timings : 7am - 5pm Cath Lab Tech FT Days · $10K Sign on Bonus · Cardiovascular Invasive Specialists, Cath Lab Techs, CV Tech, Rad Techs welcomed)!! · ARRT or RCIS Certification required · 10 hour shifts - 4 days a week - On Call 10-13 days a month. Call includes weekends and holidays. JOB SUMMARY The Cardiovascular Invasive Specialist, under general supervision, helps Physicians during catheterization / electrophysiology lab procedures. Prepares room and equipment, instructs patients, monitors patient's condition and provides routine and emergency patient care during procedures. Contributes to the orientation and training of other team members. Help in daily, monthly, and or quarterly quality control initiative through auditing and reporting. QUALIFICATIONS EDUCATION - Associate's or 2 years of work experience above the minimum qualification EXPERIENCE - Less than 1 Year of Experience CERTIFICATION/LICENSE/REGISTRATION - ACLS (ACLS): ACLS within 30 days of hire/transfer. Basic Life Support (BLS): BLS within 30 days of hire/transfer. ARRT-R Radiography (ARRT-R), Cert Cardiac Device Spec (CCDS), Cert EP Specialist (CEPS), Medical Radiologic Tech (MRT), Reg Cardio Electrophysiology (RCES), Reg Cardiovascular Invasive Sp (RCIS): Must meet one of the following: American Registry of Radiologic Tech(ARRT-R) and MRT thru TX Medical Board, or Cardio Invasive Spec(RCIS), or Reg Cardiac Electro Spec(RCES), or Cert Electro Spec(CEPS), or Cert Cardiac Device Spec (CCDS). Steven Paul Health Care Lead P: ************** E: *************************** Minisoft Technologies LLC

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. Protomer is a recently -acquired, wholly owned subsidiary of Eli Lilly and Co. based in Pasadena, CA. The team operates as a group within Lilly Research Laboratories (LRL). LRL is focused on the discovery and development of new therapeutics for the treatment of a plethora of diseases. The scientists in LRL work cross-functionally between therapeutic target area disciplines, including Diabetes, Heart Failure, Renal, Neuroscience, ASCVD, Incretins and Insulins. The team at Protomer is working on responsive biotherapeutics that can be controlled using small molecule modulators. Protomer team is based in Pasadena and the research labs are located in Pasadena. We are currently expanding the team to advance several programs, including glucose sensing insulins (GSIs), and are looking for a research associate with experience in biochemistry, synthesis, bioconjugations, and purification/characterization of therapeutic compounds of interest. The ideal candidate will have a bachelor's or master's degree in chemistry, chemical engineering, biochemistry, biology, or a related field, as well as in-depth understanding of basic biochemistry and chemistry techniques and experience with development, validation, and implementation of experiments in a biomedical research setting. The applicant must be a fast-learning, task-oriented, and self-motivated person who can perform detailed work with minimal supervision. A requirement of this role is to work well as a great teammate in a fast-paced research setting. The applicant will be responsible for assisting Protomer's senior chemists with synthesis, bioconjugation, purification, and characterization of compounds of interest. The successful candidate will actively engage and present in team meetings and is expected to contribute to the team's progress and success. Responsibilities: * Work closely with senior scientist to accomplish team objectives and research milestones * Purify and characterize compounds using HPLC, FPLC, and various biochemical methods * Introduce and maintain innovative technologies with respect to peptide therapeutics, including developing and implementing assays and maintaining critical instruments. * Perform data analysis. Critically evaluate data and results and troubleshoot experiments. * Demonstrable ability to function independently, work within a team-oriented lab environment, and work within cross-functional project teams. * Maintain accurate record keeping, perform independent data analysis, and report data in written and oral formats and retain excellent electronic lab notes. * Perform work in compliance with Lilly Research Policies. Basic Qualifications: Undergraduate degree in chemistry, biochemistry, chemical engineering with working knowledge of standard biochemistry or chemistry lab techniques. Additional Skills/Preferences: * Academic or industry research experience * Proven ability to work in a flexible, team-oriented environment. * Experience with standard biochemistry techniques. * Strong communication skills and experience presenting data in a team environment. * Strong relationship-building and interaction skills with peers and management. Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $69,000 - $179,300 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

**Have you ever thought about being part of a company that reimagines chemistry every day to build a better world?** That's the purpose of Indorama Ventures, and we want you with us on this journey! We are looking for innovative, collaborative professionals who are ready to embrace the challenge of working in a company that is constantly expanding internationally. We value flexibility, partnership, and believe that the impact of our actions goes far beyond the chemical industry. Here, diversity matters. Our work environment is inclusive, diverse, and guided by respect, ethics, and equal opportunities for all. **What we're looking for:** Indorama Ventures- Indovinya is currently looking for a dynamic individual to work as a Research Chemist I located at our The Woodlands, Texas facility. In this role, you will be responsible to work with Research Scientists to evaluate existing and new chemistries, processes, or applications related to Indorama products. This position is focused on the laboratory working on directed experiments in a safe manner. The lab work may include glassware reactors, Parr reactor reactions, etc. Also, the work could include application specific testing for areas such as agricultural, oilfield, paints/coatings, personal care, etc. **What will be expected from you?** + Maintain an awareness of the literature and other sources of information to remain current with developments in the area of functional products of interest to the Corporation. + Work to complete projects in the US project pipeline. + Set up and execute laboratory to meet both internal and external customer expectations. + Set up and execute laboratory work to as outlined by R&D scientist. + Analyzing samples by analytical methods or applications testing. + Keep neat and orderly notebooks containing a record of all work performed. Maintain other records as necessary to support patent applications for innovative products. + Maintain orderly laboratory space. + Follow all safety and training requirements. + Manage and optimize all process under your responsibility taking into consideration Quality, Legality and Food Safety (if applicable) and client needs on Indorama's products and services. + Guarantee all documentation under your responsibility updated and available for consulting. + Support R&D Lab Manager with properly managing the lab resources + Interact with TS&D team to improve the lab, lab methods, etc. + Work in cross functional /cross discipline teams as needed **What are we looking for in the ideal candidate?** + BS in Chemistry, Chemical Engineering, Material Science, Biochemistry, or Polymer Chemistry/Engineering required. + BS in other science field plus 2+ years in Research laboratory work + Associates Degree with 5+ years in Research laboratory work + 0-3 years' experience (more 3 years' experience preferred) in: + R&D laboratory preferred. + Surfactants knowledge in laboratory or application use strongly preferred. + Use and knowledge of Parr Reactors preferred. + Computer literacy w/ databases, word processing, spreadsheets + Excellent organizational and communications skills + Demonstrated presentation skills preferred. + Experience in chromatography, spectroscopy, wet analysis, or other analytical techniques preferred. + Formulation experience in Agricultural, Home Care, or Coatings preferred. + English with Bilingual Portuguese or Spanish strongly preferred. **What do we offer?** A competitive compensation package, including: - Health insurance - WellHub / TotalPass - Life insurance - And other exclusive benefits The division you'll be joining is a global leader in the chemical industry. We offer a broad portfolio of solutions and high delivery standards to markets such as Crop Solutions, Home and Personal Care, Coatings, Energy & Resources, and Performance Products. **Here, you can make a difference.** **Join us!** We're Indovinya, a top producer of chemical intermediates and surfactants. Our extensive portfolio is designed to meet our customers' most diverse needs. As producers of solutions used for crops, oil and gas, coatings, home and personal care, and other applications, we are present in the daily lives of millions worldwide. Through our increasingly sustainable chemistry, designed to meet the needs of each of our customers carefully, we want to transform our operations and products into something increasingly relevant for the planet. We are part of Indorama Ventures Public Company Limited, one of the world's leading petrochemical producers, and are present globally with manufacturing in Europe, Africa, Americas, and Asia-Pacific. With 18 plants, seven R&D centers, and an experienced management team, we have a strong track record of environmental stewardship. Our expertise lies in innovative, eco-friendly chemistry. Today, Indovinya emerges as a more robust and strategic company dedicated to driving new business opportunities while prioritizing the well-being of countless individuals as employees, customers, suppliers and mainly the communities close to our operations worldwide.

Have you ever thought about being part of a company that reimagines chemistry every day to build a better world? That's the purpose of Indorama Ventures, and we want you with us on this journey! We are looking for innovative, collaborative professionals who are ready to embrace the challenge of working in a company that is constantly expanding internationally. We value flexibility, partnership, and believe that the impact of our actions goes far beyond the chemical industry. Here, diversity matters. Our work environment is inclusive, diverse, and guided by respect, ethics, and equal opportunities for all. What we're looking for: Indorama Ventures- Indovinya is currently looking for a dynamic individual to work as a Research Chemist I located at our The Woodlands, Texas facility. In this role, you will be responsible to work with Research Scientists to evaluate existing and new chemistries, processes, or applications related to Indorama products. This position is focused on the laboratory working on directed experiments in a safe manner. The lab work may include glassware reactors, Parr reactor reactions, etc. Also, the work could include application specific testing for areas such as agricultural, oilfield, paints/coatings, personal care, etc. What will be expected from you? Maintain an awareness of the literature and other sources of information to remain current with developments in the area of functional products of interest to the Corporation. Work to complete projects in the US project pipeline. Set up and execute laboratory to meet both internal and external customer expectations. Set up and execute laboratory work to as outlined by R&D scientist. Analyzing samples by analytical methods or applications testing. Keep neat and orderly notebooks containing a record of all work performed. Maintain other records as necessary to support patent applications for innovative products. Maintain orderly laboratory space. Follow all safety and training requirements. Manage and optimize all process under your responsibility taking into consideration Quality, Legality and Food Safety (if applicable) and client needs on Indorama's products and services. Guarantee all documentation under your responsibility updated and available for consulting. Support R&D Lab Manager with properly managing the lab resources Interact with TS&D team to improve the lab, lab methods, etc. Work in cross functional /cross discipline teams as needed What are we looking for in the ideal candidate? BS in Chemistry, Chemical Engineering, Material Science, Biochemistry, or Polymer Chemistry/Engineering required. BS in other science field plus 2+ years in Research laboratory work Associates Degree with 5+ years in Research laboratory work 0-3 years' experience (more 3 years' experience preferred) in: R&D laboratory preferred. Surfactants knowledge in laboratory or application use strongly preferred. Use and knowledge of Parr Reactors preferred. Computer literacy w/ databases, word processing, spreadsheets Excellent organizational and communications skills Demonstrated presentation skills preferred. Experience in chromatography, spectroscopy, wet analysis, or other analytical techniques preferred. Formulation experience in Agricultural, Home Care, or Coatings preferred. English with Bilingual Portuguese or Spanish strongly preferred. What do we offer? A competitive compensation package, including: • Health insurance • WellHub / TotalPass • Life insurance • And other exclusive benefits The division you'll be joining is a global leader in the chemical industry. We offer a broad portfolio of solutions and high delivery standards to markets such as Crop Solutions, Home and Personal Care, Coatings, Energy & Resources, and Performance Products. Here, you can make a difference. Join us!

Job Description Staff Pharmacist The Chemist Pharmacy, Sugar Land, TX Join our dynamic healthcare team as a Staff Pharmacist, where you will play a vital role in delivering exceptional patient care through expert medication management and clinical services. This position offers an exciting opportunity to utilize your comprehensive pharmacy knowledge, critical care experience, and passion for patient service in a fast-paced pharmacy setting. As a key member of the healthcare team, you will ensure safe medication dispensing, provide clinical consultations, and support medication therapy management to optimize patient outcomes. Your expertise will help foster a collaborative environment focused on safety, accuracy, and compassionate care. Responsibilities Dispense medications accurately while adhering to all legal, safety, and regulatory standards, including HIPAA compliance. Collaborate with physicians and healthcare professionals to develop and modify individualized treatment plans for diverse patient populations. Manage pharmacy inventory efficiently by monitoring stock levels, ordering medications, and ensuring proper storage and compounding of medications using aseptic technique when preparing IV infusions or compounded drugs. Utilize pharmacy software to document prescriptions, monitor drug interactions, and maintain accurate patient records. Assist pharmacy technicians with workflow coordination, ensuring efficient operations within the pharmacy setting. Key Responsibilities: Prescription Review: Verify and interpret physician prescriptions to ensure accuracy and appropriateness. Medication Dispensing: Prepare and dispense medications, ensuring correct dosages and labeling. Patient Counseling: Provide information and advice to patients on medication use, potential side effects, and interactions. Inventory Management: Maintain and manage pharmacy inventory, including ordering and stocking medications. Compliance: Ensure all pharmacy operations comply with state and federal regulations. Collaboration: Work with healthcare providers to manage patient medication therapy and improve health outcomes. Record Keeping: Maintain accurate records of patient prescriptions, medication dispensing, and inventory. Qualifications Education: Doctor of Pharmacy (Pharm.D.) degree from an accredited institution. Licensure: Valid TX state pharmacy license. Sterile Certification Experience: Previous experience in a compounding pharmacy setting preferred. Skills: Strong attention to detail, excellent communication skills, and proficiency in pharmacy software. Knowledge: In-depth understanding of compounding, non- sterile and sterile requirements, and team management By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Applies scientific principles and uses specialized instrumentation to determine the presence and quantity of more than 400 drugs, metabolites poisons, and other toxic substances in biological fluids and other forensic specimen. Ensures the integrity of evidence and compiles final reports for use by medical examiners to determine cause and manner of death and by law enforcement agencies in criminal proceedings.1. Performs and evaluate approximately 25 complex, quantitative analytical procedures to determine the identity and concentration of drugs, metabolites, poisons, and other toxins which may be present, utilizing computerized instrumentation and proper analytical techniques. Reviews instrument function and analytical results for accuracy and appropriateness; performs additional analytical tests as indicated by initial testing; maintains detailed records of all work sufficient to verify that work product meets scientific and legal requirements. 2. Develops and maintains active quality control/quality assurance programs to document validity and quality of analytical results; assists in development and validation of new analytical procedures; remains current in technical knowledge; train new chemists; and preserves the quality and maintain the integrity of evidence to ensure the validity of analytical results; and selects appropriate specimen for analysis; and 3. Prepares laboratory reagents and standards; maintains an adequate level of supplies and equipment; and maintains, calibrate, troubleshoot and repair specialized laboratory instrumentation. 4. Evaluates analytical assays and specific assay results for the purpose of initial reporting. 5. Manages and prioritizes a large volume of analyses performed in common bench space with common instrumentation. 6. Provides on-call emergency holiday and weekend analytical services as needed by the Medical Examiner's Office. 7. Performs other duties as assigned.Education, Experience and Training: Education and experience equivalent to a Bachelor's degree from an accredited college or university in Chemistry, or in a job related field of study. Two (2) years of analytical laboratory experience. Special Requirements/Knowledge, Skills & Abilities: Ability to operate, maintain, troubleshoot, and/or repair specialized laboratory instrumentation; degree level knowledge of mathematics and chemistry; skilled in the use of standard laboratory techniques; knowledge of chemical and biological safe handling procedures; must possess good oral and written communication skills for lay, legal, and technical audiences; ability to work well with others; working knowledge of computers. Must pass an extensive background investigation. Must have a valid Texas Drivers License and good driving record. Will be required to provide a copy of 10-year driving history. Must maintain a good driving record and remain in compliance with Article II, Subdivision II of Chapter 90 of the Dallas County Code. Physical/Environmental Requirements: Routinely required to work in areas with potential exposure to biological and/or chemical hazards. The employee is required to follow good laboratory practices and safety precautions including the use of personal protective equipment. Manual dexterity and visual acuity sufficient to accurately execute standard protocols; some moderate lifting is required.

Electroninks (EI) is quickly expanding and is seeking a full-time Computational Chemist to join our team! We're building next-gen functional materials and need a scientist who can turn data into formulations against the backdrop of real technical specs and stackups of electronic devices. The ideal candidate is detail-oriented, innovative, can bridge data science and programming with chemistry, and thrives in a hands-on, collaborative environment. Specifically, we are seeking a versatile scientist that has backgrounds touching chemistry/novel materials development with data science/AI background, and ideally robotics and automation with chemicals. This individual will work with a team of highly experienced formulation and application engineers help drive the development of novel materials through computational chemistry, machine learning/AI, and design-of-experiments (DoE). This is a unique opportunity to contribute to an integrated R&D workflow that directly connects modeling with experimental results (with automation) -and ultimately, with shipped product for existing and new applications that demand electronic materials for conductive traces, thermal interface, and many use cases in advanced semiconductor packaging, sensors, and solar markets. Duties and Responsibilities: Design and execute factorial, mixture, and response-surface DoE; apply Bayesian optimization/active learning to cut iteration cycles. Build and maintain predictive/QSPR/QSAR and physics-informed models (e.g., solubility/compatibility, rheology, cure kinetics, dispersion stability). Use DFT/MD/thermo models (as appropriate) to screen monomers, polymers, solvents, surfactants, and additives (e.g., COSMO-RS/UNIFAC/Hansen parameters). Integrate data pipelines with ELN/LIMS/HTE/robotics; enforce versioning, metadata, and reproducibility. Can create database using relational database tools such as MySQL, or NoSQL database such as graphical database. Can design interface so that all scientists can input the data with less errors. Partner with formulators, process engineers, and manufacturing to translate models into scale-ready recipes and process windows (AI to EI benchtop). Communicate results with crisp visuals; make clear go/no-go calls backed by uncertainty quantification. Qualifications: Required: MS/PhD in Chemistry, Chemical Engineering, Materials Science, or related field (or equivalent experience). Proficiency in Python (pandas, scikit-learn; ideally PyTorch + BoTorch/Ax or GP frameworks like GPyTorch) and DoE tools (JMP/Design-Expert/R) or similar to execute on the tasks listed above. Experience with Bayesian optimization/active learning, mixture designs, and process DoE; strong data hygiene and statistics. Ability to work across lab + computation, write clear protocols, and drive decisions with data. Database tools (Azure SQL, MySQL, Neo4j etc) Interface tools (Python Tkinter, PyQT, PyGUI, Microsoft Power Apps etc) Preferred: 3+ years building models for formulations (inks, coatings, adhesives, polymers, colloids, or similar) and running DoE hands-on DFT/MD (VASP, Gaussian, ORCA, LAMMPS/GROMACS) and cheminformatics (RDKit). Silicones/epoxies/urethanes, conductive/EMI coatings, dispersants, surfactants, rheology modifiers, or cellulose/HEC systems. Experience with HTE/automation/robotics, inline analytics, and process scale-up. Knowledge of reliability and regulatory constraints (e.g., low-ionics, RoHS/REACH). Familiarity with LIMS/ELN integration and dashboarding (Plotly/Streamlit). Tooling You'll Use Python (pandas, scikit-learn, PyTorch, BoTorch/Ax, Optuna), R/JMP/Design-Expert, RDKit, COSMO-RS/UNIFAC/Hansen, VASP/ORCA/Gaussian (as relevant), SQL, LIMS/ELN. Note: This job description is intended to provide a general overview of the position. Other duties may be assigned as needed. Benefits: Health, Dental, and Vision Insurance - provided by Employer Short-term Disability, Long-term Disability - provided by Employer Life Insurance - provided by Employer 401(K) Plan with 2% match Paid Time Off (PTO) Paid Holidays About Electroninks: Electroninks Incorporated is the market-leader in the production and scaled manufacturing of metal-complex conductive inks. We have developed a full suite of proprietary conductive ink solutions, world-class manufacturing partners, and complimentary equipment ecosystems, thus accelerating time to market for new products and additive manufacturing breakthroughs. Electroninks' metal complex inks - including silver, gold, platinum, nickel and copper -deliver higher conductivity, flexibility and cost-effectiveness. We are the only domestic U.S. supplier of this full suite line of particle-free inks. The company's conductive inks have been adopted by customers requiring highly reliable solutions for applications in semiconductor packaging, printed circuit board (PCB) manufacturing, consumer electronics, wearables, medical devices and more. We also partner closely with best-in-class equipment and integration partners to provide customers a total ink and process solution with the ultimate goal to reduce the manufacturing costs and complexity. Our goal is to successfully implement our conductive inks into our customers products and close the gap of commercialization. We have a world-class talented and professional team, with expertise in electronics, semiconductor, advanced materials, chemistry, and ink production. We are backed by strong strategic partners and some of the most prominent global technology investors. We are headquartered and located in Austin, Texas.

Research Innovations, Inc. (RII) is breaking through the big, slow, status quo with transformative technology that fundamentally changes and improves the world. We develop cutting-edge software for all levels of the government and military. Using agile development practices and user-centered design, we create innovative software solutions for complex real-world problems. We are seeking a dedicated Vulnerability Researcher to join our Cyber Security team. As a Vulnerability Researcher at RII, you will play a pivotal role in solving unique and challenging problems for our esteemed Defense and Homeland Security customers. This position requires a proactive mindset, deep technical expertise in vulnerability research, reverse engineering, and exploit mitigations/bypasses, and a drive to live one of our core values: Get s#!t done. This position requires an Active US Top Secret security clearance, and the ability to upgrade to TS/SCI Special Access Program access WHAT YOU WILL BE DOING Conducting in-depth reverse engineering and vulnerability analysis across various architectures and platforms, including x86/64, ARM, PowerPC, and more Researching and analyzing operating system and application internals, identifying and understanding security strengths and weaknesses of those systems Developing and enhancing functionality by adding features and capabilities to undocumented interfaces Modeling and analyzing in-memory compiled application behavior to identify potential vulnerabilities and improve security measures Developing and understanding mobile/embedded systems and kernel modules, particularly related to vulnerability research Participating actively in our extensive Vulnerability Research mentorship program, sharing knowledge and collaborating with colleagues WHAT YOU HAVE DONE Proficient understanding of wireless networking and associated security protocols, such as Wi-Fi (802.11), Bluetooth, or cellular networks (2G/3G/4G/5G). Familiarity with common vulnerabilities and attack vectors in wireless communication Strong grasp of legacy exploit mitigations and bypass techniques, including but not limited to Address Space Layout Randomization (ASLR), Data Execution Prevention (DEP/NX), Stack Cookies (Canaries), and Control Flow Integrity (CFI). Experience in identifying and circumventing these security measures In-depth knowledge of both security and network fundamentals, such as cryptography, authentication, access control, and network protocols (TCP/IP, UDP, DNS, HTTP, etc.). Understanding the security implications and potential vulnerabilities associated with these concepts Programming experience with both scripted languages (preferably Python3) and compiled languages (preferably C). Ability to write efficient and secure code for vulnerability research and exploit development purposes Familiarity with low-level architectures such as x86, ARM, or MIPS. Understanding the underlying principles, instruction sets, and memory models of these architectures for vulnerability identification and analysis Experience with operating system internals and implementations, including Windows, Linux, or mac OS. Knowledge of system structures, process management, memory management, and security mechanisms at the kernel level Excellent oral, written, and interpersonal communication skills, with the ability to effectively convey complex technical concepts and interact with customers and team members alike EVEN BETTER Experience with vulnerability research and reverse engineering of real-time operating systems (RTOS), such as FreeRTOS, QNX, or VxWorks. Understanding the unique security challenges and attack vectors specific to RTOS environments Bachelor's or postgraduate degree in Computer Science, Computer Engineering, or a related field Experience with software protection and binary armoring techniques, such as anti-debugging, code obfuscation, or tamper resistance. Understanding the methods employed to protect software from reverse engineering and vulnerability discovery Proficiency in agile development methodologies, including Scrum or Kanban, for efficient collaboration and iterative development in a cybersecurity context Familiarity with low-level iOS/Android development and associated security considerations, such as jailbreaking or rooting, application sandboxing, or secure interprocess communication (IPC) Knowledge of hypervisors and their security implications, including virtualization-based security, guest escape vulnerabilities, or hypervisor-based rootkits Proficiency in malware analysis, including static and dynamic analysis techniques, behavioral analysis, and code deobfuscation. Experience in identifying and analyzing malware samples to understand their capabilities and potential vulnerabilities Experience with constraint solving techniques, such as symbolic execution, theorem proving, or model checking, for vulnerability identification, verification, and exploit generation Background in machine learning, particularly in the context of vulnerability analysis and detection, such as using ML techniques to identify patterns in code or analyze network traffic for anomaly detection At RII, we believe that diversity in our workforce is critical to our success. We strive to hire great people from a wide variety of backgrounds, not just because it's the right thing to do, but because it makes us stronger. We work to help your intellectual passions and creativity thrive. It's one of our core values: Let your geek flag fly. We also offer all employees comprehensive benefits including: flexible work schedules, health insurance coverage, paid time off, 401k with a company match, paid parental leave, access to wellness programs and much more. You get this all from day one, and all paid for by RII. It's all part of another of our core values: Stay human. It's why our comfortable and colorful offices such as our headquarters, include a community game room, pantry, massage chair, and an escape room, among other amenities. It's why we have community ambassadors and regular community events. Research Innovations, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender, gender identity or expression, national origin, genetics, disability status, protected veteran status, age, or any other characteristic protected by state, federal or local law.

Job Description We are seeking an analytical chemist with broad experience in analytical chemisty including expertise in spectroscopy, solid-state characterization techniques, chromatography and mass spectrometry. This role will focus on supporting material characterization of energetic and related materials, and other novel materials of interest. Essential Duties and Reponsibilities: Develop and apply spectroscopy methods (e.g. Raman, FTIR, UV-Vis, fluorescence) for characterization of energetic materials and novel compounds. Develop and apply chromatographic and mass spectrometry methods (e.g. GC-MS, LC-MS, HRMS) for characterization of energetic materials and novel compounds. Perform thermal and crystallographic analyses (e.g. DSC, TGA) to evaluate material stability, polymorphism, and structure-property relationships. Collaborate with synthesis teams to identify and quantify trace impurities arising from benchtop chemical reaction experiments. Develop and validate analytical methods to detect unknown and known impurities at trace levels. Integrate spectroscopy data with chromatographic and mass spectrometric results for comprehensive material profiling. Contribute to expanding organizational capability into broader materials science (e.g., polymers, co-crystals, composites). Perform routine maintenance and troubleshooting for a variety of analytical instrumentation. Maintain rigorous safety practices appropriate for handling energetic and hazardous materials. Required Knowledge, Skills & Abilities: Demonstrated expertise in spectroscopy techniques (Raman, FTIR, UV-Vis). Demonstrated expertise in chromatographic and mass spectrometry techniques (GC-MS, LC-MS, HRMS). Experience with thermal analysis and crystallographic methods (emphasis on DSC/TGA). Familiarity with energetic materials, explosives, or hazardous chemical handling is highly desirable. Strong collaborative skills; ability to communicate across technical teams. Track record of method development and problem-solving in analytical chemistry. Advanced skills in maintenance of analytical chemistry equipment including spectroscopy and mass spectrometry instruments is desired. Education/Experience: Ph.D. in Chemistry, Materials Science, or related field; or MS in Chemistry, Materials Science, or related field with 2+ years relevant experience. BS in Chemistry, Materials Science, or related field with 5+ years relevant experience. Certificates & Licenses: None required Clearance: This position requires that the candidate be willing and able to complete a successful background screening for a security clearance. Candidates with an active security clearance will receive preference. Supervisory Responsibilities: None required. Working Conditions/Equipment: This is a full-time, fully on-site position. This position primarily operates during standard business hours, with occasional needs for extended workdays or weekend work to meet project timelines. A significant portion of this role (approximately 75%) involves hands-on laboratory work. You should be comfortable spending extended periods of time conducting experiments and working at a computer. The role may also require occasional domestic travel for conferences, trade shows, or research-related meetings. The ability to lift and carry light loads (under 25 lbs) without assistance is necessary. Powered by ExactHire:186047

Analytical Testing: Method and equipment development as well as performing wet chemistry analyses. Submitted candidates should have some 'wet chemistry' experience to be considered for this role. Perform research and development projects. 1. Analytical Testing or Food related knowledge 2. Capable to identify test results and make recommendations to manager. 3. Math and Computer Skills Knowledge about analytical equipment Chemistry, Biology or Food Science experience desired Additional Information All your information will be kept confidential according to EEO guidelines.

AustinPx, where science meets innovation, and YOU make the difference! At AustinPX, we're not just advancing science-we're accelerating it! We partner with the world's leading pharmaceutical companies to develop and deliver life-changing treatments to patients faster. And now, we're on the hunt for fresh talent to help us on this mission and to develop into future pharmaceutical leaders! Ready to contribute to life-changing projects, and have a blast doing it? Then read on! AustinPx is a contract development and manufacturing organization (CDMO) specializing in preclinical through Phase II formulation and process development and GMP manufacturing of oral dosage forms. We specialize in bioavailability enhancement, including our next generation amorphous dispersion platform, KinetiSolTM Technology. At AustinPx, we recruit and develop exceptional individuals with a passion for science and determination to excel. We offer a technically challenging and stimulating environment and the opportunity to grow and advance in your career. We are currently seeking an experienced Analytical Chemist to join our amazing team. Position Description Support product development activities for client-based projects, ranging from preclinical to commercialization with minimal supervision. Develop, optimize, transfer, and validate analytical methods for raw materials, intermediates, and finished products (HPLC/UPLC, UV-Vis, FTIR, dissolution, XRD, Karl Fischer), including drafting, reviewing and executing analytical methods, protocols, and reports. This may include creating phase-appropriate strategies for client-defined product development projects. Design, execute, interpret and review experiments to support formulation development, process development, and stability studies. Interfaces with cross-department development teams, including participating in and presenting at client project updates. Uses knowledge and abilities to troubleshoot and resolve technical issues that affect the technical scope. Able to recognize and communicate key issues likely to affect successful or timely completion and recommend appropriate solutions. Authors analytical sections of development reports and technical summaries. Ensure compliance with safety, quality, and regulatory standards (e.g., GMP, GLP, ICH guidelines), including documenting analytical procedures and results. Operate and maintain analytical equipment including coordination with external maintenance providers. Participates in continuous improvement efforts for analytical laboratory procedures and practices. Supports the generation of regulatory documents. Mentors and trains junior analytical chemists. Effectively manages workload according to company and departmental priorities. Maintains a clean and organized working environment. As needed, supports GMP operations in performing in-process, release, and stability testing of manufactured material and raw materials. All other duties as assigned. CompetenciesTo perform the job successfully, an individual should demonstrate the following competencies: Proficient in chemical analysis and testing methodologies; specifically, HPLC/UPLC, FTIR, dissolution, and Karl Fischer. Proficient in advanced analytical techniques such as method development or fundamentals research. Proficient with analytical method development, validation, and transfers. Excellent problem solving and decision-making skills. Computer skills: Microsoft Office package and basic computer skills facilitating assimilation of various software packages associated with analytical equipment. Strong data and statistical analysis skills. Excellent written and verbal communication skills. Excellent organizational and documentation skills required. Strong multi-tasking skills. Works well in a team environment. Requirements Bachelor's degree in chemistry or related discipline with relevant work experience. 5-7 years of PHARMACEUTICAL INDUSTRY experience in analytical development/services R&D experience highly preferred. AustinPx is committed to a culture of respect and excellence in everything we do. As a customer-facing organization, we are laser focused on providing client-centric service. Serving our clients well goes beyond technical knowhow - it requires strong communication skills, a commitment to quality, integrity and respect for our colleagues and clients. We want people who are passionate about pharmaceutical development, have a sense of urgency, and enjoy solving problems. We offer a comprehensive suite of health and retirement benefits, resources and programs to meet your and your family's needs. Our positive and fast-paced working environment is continually focused on improving processes to remain innovative and dynamic.

Lab Chemist needs 1 year of lab experience in chemistry or Biochemistry with either a Bachelor or Master degree Lab Chemist requires: Trained in fundamental chemistry laboratory techniques (i.e. TLC, recrystallization, solvent-solvent extraction, flash column, prep TLC, etc.) Analyze various spectral data including 1H NMR, 13C NMR, IR, GC-MS, LC-MS, and 2D NMR Navigate through scientific search engines such as Scifinder to investigate relevant scientific literature and reagents Proficient in common computer software including Microsoft Word, Excel, ChemDraw, and Biorender to create figures for scientific literature Lab Chemist duties: Perform accurate and timely testing of routine and some non-routine lab samples in accordance with appropriate Good Manufacturing Practices and safety guidelines. Completes second person verification of test results. Participates in laboratory root cause investigations and quality system improvement initiates by executing well defined protocols and procedures. Shares technical information and best practice within the group. Design and evaluation of experiments, methods development and characterization, support of process development / optimization and the analysis and interpretation of data. Conduct studies to validate methods, develop methods, evaluate new technologies. Sample Analysis. Sample preparation, instrument set-up and operation, data entry, primary data review. Coordination of method transfers and co-validations.

CDL Sign-on Bonus: $3,000 Clean Earth is a leading provider of environmental services in the United States providing remediation, disposal, recycling, and beneficial reuse solutions for hazardous and non-hazardous waste, contaminated soil, and dredged material. Our vast portfolio of technologies and services touches nearly every industry that generates waste including energy, infrastructure, commercial, industrial, retail, and healthcare markets. Every day our teams across the country take a hands-on, dedicated approach to recycling and beneficially reusing waste that would otherwise go into landfills. We value our employees as our most important asset, and this is reflected in many areas across our company including recently being named a 2024 Most Loved Workplace . We are committed to creating a positive work culture that fosters growth and development while ensuring the health and safety of our employees. Why join Clean Earth? In addition to competitive pay, we also offer: * Health benefits available Day 1 * 401k available Day 1 * 10+ paid holidays/year * Free HAZWOPER training and certification * Overtime opportunities * Ability to be cross-trained into different roles Job Description PRINCIPAL DUTIES AND RESPONSIBILITIES: * Handles hazardous materials including inventorying, identifying, segregating, and packaging waste material in accordance with Lab Pack policies, procedures and practices and all applicable regulations. * Perform onsite services which may include waste collection, consolidation (i.e., bulking, repackaging), sampling, safety/compliance inspections, and other related activities required by the customer/contract. * Assists other business groups, i.e., Depack, Retail and HHW, for both internally and onsite as needed. • Preparing shipment of packaged waste by inspecting, labeling, marking, and loading into the transport vehicle * Properly completes documentation including shipping papers, Land Disposal Restrictions (LDR's), evaluations/certifications and other required documentation in accordance with appropriate regulations and procedures. * May require obtaining and maintaining a Commercial Driver's License (CDL) with Hazmat Endorsement to legally operate Clean Earth vehicles necessary for transporting personnel and waste to and from customers' job locations. * Follows, understands, and promotes by example, all Health & Safety /Job Safety Analysis (JSA's) procedures including development of on-site Health &Safety plans/JSA's as outlined in the procedures and policies. * Performs other duties as assigned. Qualifications Basic Requirements: * An associate's degree in general science (BS preferred) is required for the Lab Pack Chemist. * Driver's License with clear record * Moderate to extensive travel with 20% overnight travel * Physical ability to lift and move material of various weights frequently exceeding 55 lbs. * Basic understanding of chemistry through general chemistry or biology This position requires a CDL B to be obtained within a 6-month period from your start date. Failure to obtain a CDL B within the 6-month period will mean you are no longer eligible for the Lab Pack Chemist position. This position is also contingent upon successful completion of a DOT physical, DOT Drug Screen and any other DOL or company requirements. Additional Information Clean Earth offers competitive benefits including health, dental, vision, life, and disability insurance plans starting on the first day of employment; paid time off, wellness benefits, employee discount program, tuition assistance, and a 401k with company matching. We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, gender identity, or genetics. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. If you have a difficulty applying for any job posted on Harsco Clean Earth's website because a disability prevents you from using the online system, Clean Earth offers the following alternate application procedure: Call toll free ************** and leave your name, phone number, city and state of residence. Clean Earth will arrange for an alternate method of applying and will consider your application together with all other applications received for the job. This line is dedicated to disability applications only. No other inquiries will receive a response.

Job Description STEP INTO A ROLE WHERE PRECISION MEETS PROBLEM-SOLVING! Tentamus North America is on the search for an Analytical Chemist III to join our Analytical Food Laboratories Team in Grand Prairie, Texas! In this role, you'll work with advanced instrumentation, tackle complex troubleshooting, and deliver results that meet the highest scientific standards-all while making a real impact in our accredited lab. Apply today to join us in our mission to ensure quality and safety across the globe. KEY RESPONSIBILITIES The Analytical Chemist III plays a critical role in ensuring the accuracy, integrity, and compliance of laboratory testing. Duties include: Compliance & Ethics: Follow all company policies, SOPs, and quality standards, including ISO/IEC 17025, NELAC, and other accrediting agencies. Uphold principles of Good Laboratory Practices and maintain ethical standards and conflict-of-interest policies. Testing & Quality Control: Independently perform testing and quality control procedures, producing accurate, traceable, and defensible results within client timelines. Review client requests against test data, follow methods exactly, ensure controls are in place, and report any problems with equipment, media, or test methods. Instrumentation: Operate and maintain advanced instrumentation including HPLC, GC, ICP-MS, LC-MS or GC-MS, as well as UV-VIS, FTIR, analytical balances, and safety hoods. Perform troubleshooting, preventative maintenance, and non-routine problem-solving. Sample Management: Oversee the full flow of samples through the chemistry lab, including preparation (such as homogenization), retention/disposal, and daily quality control samples. Record Keeping: Maintain accurate, legible, and traceable records for all activities. Make corrections properly and ensure documentation links back to the person performing the function. Methods & Validation: Become proficient with test methods and reagents, know where SOPs and reference materials are located, and understand expected results. Perform method transfers and participate in method validations and verifications. Data Review & Reporting: Recognize reasonable/unusual results based on client specifications or past history and promptly report concerns to the Lead Chemist or Chemistry Manager. Laboratory Support: Actively participate in cleaning, equipment maintenance, and general lab upkeep to ensure a safe and efficient environment. Client Interaction: Communicate with clients about test results, problems, and methods as required. Leadership Support: Perform the duties of Wet Chemist I and II when necessary, assist with training, and take on additional responsibilities as assigned by management. Other duties as assigned. Physical Requirements: Ability to work at a laboratory bench for extended periods and lift up to 35 pounds. SCHEDULE Full Time, M - F, 10:00AM - 7:00PM after 90-day probationary period. Weekends as Needed QUALIFICATIONS Our ideal candidate will be authorized to work in the United States without restriction or sponsorship, hold a BS degree or higher in chemistry, biochemistry, or a related science discipline. Other qualifications include: Minimum 2 years of experience in Analytical Chemist II position or related role. Must have experience running LC-MS (SCIEX and/or ThermoFisher Quantiva) Experience in water soluble and fat-soluble analysis by LC-MS Preventative maintenance and troubleshooting Method development and validations Review of peer data as part of approval process Ability to work and collaborate within a team structure Possess strong attention to detail and strong communication skills. WHAT'S WAITING FOR YOU? Annual salary between $55,000 - $65,000, comprehensive and low-cost benefit plans (medical, HSA, dental, vision, disability, life insurance) Employee Assistance Program, PTO, and a matching 401k! ABOUT TENTAMUS Labs for Life . We are a global network of full-service accredited analytical laboratories providing crucial quality and safety analysis for clients locally, nationally, and beyond using proven methods of chemistry and microbiology. Many of the products you use and consume daily rely on Tentamus labs. With 20 labs in the Americas and growing (100 globally), we celebrate having talented diverse scientific and service-oriented professionals. Tentamus Website | Tentamus North America LinkedIn | AFL LinkedIn Job Posted by ApplicantPro

Job DescriptionSalary: Market, DOE Chemist III Skin Care Formulations About Us BeautiSol, LLC is a growing company in the DFW area dedicated to developing and improving innovative skin care solutions. Our mission is to create products that deliver consistent quality, safety, and performance, backed by strong science and careful formulation work. Position Summary We are seeking Chemist III to join our formulation and production team. This role will be directly involved in improving existing skin-focused formulations, developing new products, conducting batch and stability testing, and supporting the successful transfer of lab processes into production. The ideal candidate has hands-on experience with personal care products, strong technical skills, and the ability to manage projects from concepts through manufacturing. Location Euless, Texas Job Type: Full-Time Pay: DOE FLSA: Exempt Remote Position: No Schedule: Monday to Friday, Day Shift Benefits available 1st month following 30-days of employment Sponsorship is not available for this position Key Responsibilities Modify, optimize, and troubleshoot existing skin care formulations. Support the development of new skin-focused formulations from concept to launch. Conduct batch preparation, stability testing, and raw material evaluations. Oversee pilot and full-scale production batches, ensuring consistent quality and performance. Work with production teams to resolve technical issues and streamline processes. Ensure all work complies with safety, quality, and regulatory standards. Maintain accurate records of formulations, testing, and process adjustments. Provide mentorship and technical guidance to junior staff. Collaborate cross-functionally with Quality, Marketing, Operations, and Regulatory teams. Qualifications Bachelors degree in Chemistry, Chemical Engineering, or related field (Masters preferred). 57 years of formulation experience in skin care, personal care, or related consumer products. Demonstrated ability to independently develop and optimize formulations. Hands-on experience in scale-up and production transfer. Strong knowledge of stability testing, compatibility, and ingredient interactions. Excellent organizational, analytical, and communication skills. Ability to handle multiple projects in a fast-paced environment. Preferred Skills Familiarity with emulsions, active ingredients, preservation systems, and delivery technologies commonly used in skin care. Experience supporting product launches and working under GMP/ISO quality systems. Proficiency with laboratory instrumentation and data management tools.