Commercial Steel Erection Inc. jobs in Roanoke, VA - 23908 jobs

Job DescriptionJob Title: Construction Plumber Department: Industrial Services Reports To: Project Manager FLSA Status: Non-Exempt Installs, maintains, and repairs plumbing systems, piping, fixtures, and equipment on construction projects in accordance with applicable codes and safety standards. Performs work to ensure proper operation of water supply, drainage, and gas distribution systems. Essential Duties and Responsibilities include the following. Other duties may be assigned. 1. Regulatory & Safety Compliance - Has practical knowledge of local, state, and federal Occupational Safety and Health Administration (OSHA) regulations, CSE, Inc. rules and regulations, and site-specific requirements. - Ensures work is performed in compliance with plumbing codes and safety standards. - Understands hazard communication, PPE requirements, and emergency action procedures. 2. Planning and Coordination - Reviews blueprints, drawings, and specifications to determine layout of plumbing systems. - Coordinates installation and repair work with supervisors and other trades to meet project schedules. - Organizes tools, materials, and job site activities to maximize efficiency. 3. Installation and Maintenance - Measures, cuts, threads, and bends pipe using proper tools and equipment. - Installs water supply lines, drainage systems, gas piping, and plumbing fixtures. - Assembles, secures, and tests piping systems for leaks and performance. - Repairs or replaces defective piping, valves, and fixtures as required. 4. Inspection and Testing - Performs routine inspections of installed plumbing systems to ensure compliance and functionality. - Conducts pressure and leak tests per specifications and code requirements. - Completes defect reports for deficiencies and reports issues to supervisor. 5. Maintenance of Equipment and Tools - Ensures tools and equipment are properly maintained and stored. - Performs routine maintenance of plumbing tools, threading machines, and related equipment. Supervisory Responsibilities This job has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below represent the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - Education and/or Experience: High school diploma or equivalent; completion of an accredited plumbing apprenticeship program preferred. 2-4 years of related plumbing experience in construction required. Journeyman or Master Plumber license preferred, depending on state requirements. - Language Skills: Ability to read and interpret safety rules, blueprints, operating instructions, and procedure manuals. Ability to complete work orders and routine reports. - Mathematical Skills: Ability to add, subtract, multiply, and divide with whole numbers, fractions, and decimals. Ability to calculate material needs, measurements, and pipe angles. - Reasoning Ability: Ability to solve practical problems and adapt to a variety of situations. Ability to interpret instructions in written, oral, diagram, or schedule form. Physical Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to handle tools and materials, reach with arms, climb, balance, stoop, kneel, crouch, and crawl. The employee must frequently lift and/or move up to 50 pounds and occasionally more with assistance. Vision and hearing requirements include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment The employee is regularly exposed to construction site conditions including moving mechanical parts, wet and humid environments, fumes, airborne particles, outside weather, elevated heights, and confined spaces. Noise levels are typically loud. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.

About Architectural Resources is an independent agency representing top tier exterior building product manufacturers in the commercial building sector. Our growing company is searching for experienced candidates for the full-time position of architectural sales representative. The architectural sales representative will promote the company and its products to architects, specifiers, designers, engineers, contractors and owners in the Los Angeles, Orange, Riverside & San Bernardino markets. Responsibilities · On the road position, meeting with customers 3-4 days per week. · Project tracking & follow up. · Architectural meetings & presentations. · Contractor meetings. · Job site visits. · Working in a fast-paced environment demanding strong organizational, technical, and problem-solving skills. · Plan review for bid opportunities. · Collaboration with manufacturers to bid opportunities. · Generation of small types and quantities quotes. · Order write ups to manufacturers for new orders. · Project management: Work with manufacturers and contractors to ensure submittal deliverables are on schedule. · Data entry in CRM. Qualifications: · Minimum of 1-year architectural sales experience. · Technical sales background. · Excellent oral and written communication skills. · Strong work ethic. · Service oriented mentality. Compensation in addition to Base Salary + Commission: · Vehicular Mileage reimbursement. · Cell Phone · Monthly Internet Stipend · Health insurance where the company pays a portion. · Paid Holidays & Vacation Time. · Sick leave.

Benefits: Flexible schedule American Direct Logistics ******************************** is a National Final Mile Delivery and Assembly company. We are currently looking for Independent Contractors with the ability to deliver and install RTA furniture and fitness equipment. We have immediate openings in your geographical area. If you currently provide these services, this is an excellent opportunity to add additional revenue to your weekly earnings. The Opportunity: IC is to deliver and install RTA furniture & fitness equipment in customers' home. Supplemental income (no routed work) Flexibility to schedule jobs based upon your schedule. Growth opportunity Responsibilities: Contact customer to schedule delivery/installation appointment. Picking up freight from your local warehouse Delivering and assembling product to our customers' homes Provide trash removal from installation site Job Requirements: Cargo van, sprinter van, box truck (up to 16') Delivery & Assembly experience required (minimum 2 years) 2 man team (IC's must have their own helper, we do not hire helpers) Valid driver's license, vehicle registration and vehicle insurance Excellent communication skills (must speak fluent English) Smart phone Able to pass a background check Earnings Potential- $500-$1500 Weekly Direct Deposit Flexible Schedule Third Party Insurance Provider Available (commercial auto, general liability, cargo) We will send you our introductory email that will get you started with our hiring process once you submit your application.

Join a Team That's Building More Than Projects - We're Building Futures! Join Erickson-Hall Construction Co., a National and Multi-Regional Top Workplace for five consecutive years. We're 100% Employee-Owned - building success through teamwork, innovation, and construction done right by people who care. This position is based in Anaheim, CA. The Director of Business Development (Higher Education) supports Erickson-Hall Construction Co. by driving strategic growth and organizational sustainability through the development and implementation of mission-aligned initiatives. This position plays a central role in translating vision into action by identifying opportunities, building strong relationships and partnerships, and leading the development of high-impact projects that benefit the communities around them. Essential Duties: Leverage, develop and build on current and/or new relationships with higher education institutions. Expand and cultivate a pipeline of growth projects in the higher-education vertical in partnership with the VP of Business Development. Increase our company's visibility and presence amongst key stakeholders through attending and participating in conferences, associations, and other higher-education events. Demonstrate an understanding of higher education facility construction needs, capital plans, campus priorities, and funding methodology. Strategically evaluate potential projects by analyzing project requirements weighed against potential risk and potential profit. Track emerging trends, funding landscapes, and partnership prospects. Other duties as assigned. Knowledge, Skills and Abilities: 7 years of progressive business development and client relationship management experience in the construction market. Ability to represent Erickson-Hall Construction Co. and its services, including conducting presentations and speaking publicly on behalf of the organization. Proven ability to secure construction projects and achieve/exceed revenue goals. Comfortable approaching clients with sales conversations; able to handle impromptu client conversations and unique requests professionally and confidently. Ability to read and interpret construction plans and technical specifications. Adept at working collaboratively with different departments on applicable pursuits (Marketing, Estimating, Pre-con, and Operations). Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: Ability to travel (local travel within Southern CA 50%, outside CA 10%) as needed. Have full range of mobility in upper and lower body. Be able to work in various positions, including but not limited to stooping, standing, bending, sitting, kneeling, and squatting for long periods of time. Ability to lift, push, and pull up to 25 pounds occasionally and as needed. While performing the duties of this position, an employee is regularly required to work indoors, but may be subjected to noise that regularly occurs at a construction site. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Be able to use hands to finger, handle, feel or operate objects, office materials or controls and reach with hands and arms. Benefits Employee Stock Ownership Plan (ESOP) Profit-Sharing 100% employer-paid Health/Dental premiums for team members Generous Vacation and Sick Time off Nine (9) Paid Holidays - Including your Birthday! 100% employer-paid Life, AD&D, and Long Term Disability insurance Retirement plans with company contribution Subsidized tuition on Child Care Health/Dependent care FSA's Making a difference in the communities you serve Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.

Berkel & Company Contractors, Inc. is seeking a Survey Technician for our regional office located in Atlanta, GA. This field-based position will support projects related to Auger Pressure Grouted Piling, Displacement Piling, Driven Piling, Pressure Grouting, Sheeting and Shoring, Ground Improvement and Micro Piling located across the Southeast. This position ensures all required layout and as-builts for a given project are performed accurately and promptly to support Berkel's ongoing projects. Our survey technicians are expected to have competent technical knowledge and strong attention to detail. This position offers the opportunity for growth into quality control supervisory roles. Responsibilities include, but are not limited to: Compute coordinates for use in layout. Perform field layout and as-builts. Preparation of detailed as-built reports. Coordinate with project managers and superintendents to ensure accurate and timely completion of survey tasks. Perform analysis of survey data and assist in the resolution of any discrepancies in measurements or documentation. Review and cross checking of shop drawings and contract drawings, including but not limited to structural, architectural, and civil drawings. Qualifications: 2+ years' experience as a Survey Technician or in a similar role. Experience in preparing survey documents and conducting fieldwork. Experience with industry software, including but not limited to, AutoCAD, Revit, Bluebeam, and Microsoft Office programs. Ability to utilize survey equipment and technology effectively. Compensation: Based on experience. EOE/Minorities/Females/Veterans/Disability (Compliant with the new VEVRAA and Section 503 rules

REPORTS TO: Utility Coordinator FLSA STATUS: Non-Exempt CLASSIFICATION: Personnel System - Requires satisfactory completion of a six (6) month probationary period PAY GRADE: 116 SAFETY SENSITIVE: Yes - Subject to random drug testing per the Athens-Clarke County Drug and Alcohol Ordinance Purpose of Job The purpose of this job is to inspect a variety of Public Works projects and assets, ensuring that new subdivision street construction and storm drainage facilities are completed in accordance with approved specifications, drawings, and appropriate Unified Government ordinances. Duties and responsibilities include, but are not limited to, monitoring daily activities of project site construction, generating project cost estimates, inspecting work of contractors and subcontractors, inspecting post-construction stormwater management facilities, investigating citizen complaints, and performing additional tasks as assigned. Job Related Requirements WORK SCHEDULE: Monday - Friday, 7:30am - 4:00pm with occasional evening and weekend hours May be required to work on religious holidays. Regular and predictable attendance is required. Must work cooperatively with others. When requirements include vehicle operation, responsible for the safety, readiness and operation of the vehicle and must abide by ACC's safe driving policy.High school diploma or equivalent with two years of roadway construction/inspection experience, storm drainage construction/inspection experience, stormwater inspection experience, development site inspection experience, surveying experience, or erosion control construction/inspection experience required; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this job. Must possess a driver's license valid in the State of Georgia. Must possess or have the ability to obtain Erosion and Sediment Control Advanced Fundamentals Level 1B Certification within 6 months of employment. Must possess or have the ability to obtain National Safety Council D.O.T. Flagging Certification within 6 months of employment. The following duties are normal for this job. These are not to be construed as exclusive or all-inclusive. Other duties may be required and assigned. When Assigned to Right of Way: Inspects erosion and sediment control installations on assigned projects; makes recommendations for correction, relays information regarding projects specifications, and ensures work is completed during a given time frame. Inspects right-of-way for repairs and possible encroachment issues; facilitates acceptance process; maintains right-of-way document files and reviews right-of-way encroachment permits; monitors the progress and performs final inspection once the project is complete. Monitors daily activities of subdivision and project site construction at numerous projects simultaneously, ensuring compliance with safety and project guidelines. Meets with contractors, subcontractors, public works crews and appropriate parties (electrical company, historical society, natural gas company), before, during and at the completion of construction and maintenance projects to ensure proper completion of the assigned project. Meets with property owners, citizens or other departments to resolves complaints or problems associated with improvement projects abutting their property. Analyzes complaints received from citizens; develops solutions to alleviate problems. Composes technical reports to supervisor, and letters to developers, private citizens, or contractors to gain compliance or correction when site violations occur or property maintenance is needed. Coordinates and conducts pre-construction or post construction meetings as required. Attends monthly Utility Coordination Committee meetings. Knowledge, Skills and Abilities Knowledge of the policies, procedures, and activities of the Public Works Department as they pertain to the performance of duties relating to the position of Public Works Inspector. Knowledge of the terminology used within the department, by the Georgia Department of Transportation, and the Georgia Soil and Water Conservation Commission. (Includes current GDOT Specifications, GDOT Construction Standards & Details, and the Georgia Stormwater Management Manual.) Knowledge of road construction practices and procedures. Knowledge of curb and gutter, drainage structure, driveway and sidewalk specifications. Knowledge of stormwater management facilities and long term maintenance needs. Knowledge of grading, base and paving standards for road construction, Georgia traffic laws, land surveying principles, driveway regulations, and pavement failure causes and prevention. Knowledge of various computer software programs as necessary in the performance of job duties. Skill in reading and interpreting blueprints, inspecting traffic control devices, and in record keeping. Skill in the use of asphalt thermometer, map wheel, distance wheel, drafting tools, bush ax, pick ax, shovel, engineering scale, general office equipment and surveying equipment. Ability to compile, organize, prepare and maintain an assortment of records, reports and information in an effective manner and according to departmental and/or governmental regulations. Ability to interact with management, employees, members of the general public and all other groups involved in the activities of the County as they relate to the Public Works Department. Ability to use independent judgment and discretion, including the handling of emergency situations, determining and deciding upon procedures to be implemented, setting priorities, maintaining standards, and resolving problems. Ability to comprehend, interpret, and apply regulations, procedures, and related information. Ability to handle required mathematical calculations. Ability to utilize and understand computer applications and techniques as necessary in the completion of daily assignments. (ADA) MINIMUM QUALIFICATIONS OR STANDARDS REQUIRED TO PERFORM ESSENTIAL JOB FUNCTIONS PHYSICAL REQUIREMENTS: Must be physically able to operate a variety of machinery and equipment including a probe rod, asphalt thermometer, map wheel, distance wheel, drafting tools, bush ax, pick ax, shovel, surveying equipment, engineering scale, and general office equipment. Must be able to use body members to work, move or carry objects or materials. This position requires: stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, fingering, grasping, feeling, talking, hearing, seeing, and repetitive motion. Must be able to exert up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently. Physical demand requirements are at levels of those of medium work. DATA CONCEPTION: Requires the ability to compare and/or judge the readily observable functional, structural, or compositional characteristics (whether similar to or divergent from obvious standards) of data, people, or things. INTERPERSONAL COMMUNICATION: Requires the ability to hear, speak and/or signal people to convey or exchange information. Includes giving / receiving assignments and/or directions to assistants / from supervisors. LANGUAGE ABILITY: Requires the ability to read a variety of erosion control manuals, construction plans, standard drainage contracts, Unified Government ordinances such as soil erosion and storm water management, subdivision regulations and design standards, traffic control manuals, deeds and plats, D.O.T. specifications and permits, project status reports, inspection logs, roadway encroachment permits, driveway permits, and informational documentation, directions, instructions, and methods and procedures. Requires the ability to prepare standard drainage contracts, work orders, daily logs, and progress reports using prescribed formats and conforming to all rules of punctuation, grammar, diction, and style. Requires the ability to speak to groups of people with poise, voice control, and confidence. INTELLIGENCE: Requires the ability to learn and understand complex principles and techniques; to acquire and be able to expound on knowledge of topics related to primary occupation; and to make independent judgment in the absence of management. VERBAL APTITUDE: Requires the ability to record and deliver information, to explain procedures, and to follow oral and written instructions. Must be able to communicate effectively and efficiently in a variety of administrative, technical or professional languages including civil engineering, construction, surveying, real estate, and legal terminology. NUMERICAL APTITUDE: Requires the ability to utilize mathematical formulas; add and subtract totals; multiply and divide; determine percentages; interpret graphs; and perform calculations involving variables, formulas, square roots, and polynomials. FORM/SPATIAL APTITUDE: Requires the ability to inspect items for proper length, width, and shape, visually with construction inspection, drafting, surveying, engineering, and general office equipment. MOTOR COORDINATION: Requires the ability to coordinate hands, fingers, and eyes accurately in using construction inspection, drafting, engineering, surveying and general office equipment. Requires the ability to lift, bend, push, pull, manipulate equipment/tools and objects as the position necessitates. MANUAL DEXTERITY: Requires the ability to handle a variety of items such as a prob rod, asphalt thermometer, map wheel, distance wheel, drafting tools, bush ax, pick ax, shovel, engineering scale, surveying equipment and general office equipment. Must have the ability to use one hand for twisting or turning motion while coordinating other hand with different activities. Must have moderate levels of eye/hand/foot coordination. COLOR DISCRIMINATION: May require the ability to differentiate between colors and shades of color. INTERPERSONAL TEMPERAMENT: Requires the ability to deal with people beyond giving and receiving instructions. Must be adaptable to performing under considerable stress when confronted with an emergency. PHYSICAL COMMUNICATION: Requires the ability to talk and/or hear: (Talking - expressing or exchanging ideas by means of spoken words). (Hearing - perceiving nature of sounds by ear). Must be able to communicate via telephone, two-way radio. ACCGov is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. ACCGov is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation to participate in the job application or interview process, contact Leah Jagatic, HR Coordinator, Human Resources, ************ or ***********************.

Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year, having no signs of slowing down. Our company grew through challenging and interesting opportunities that placed us in ENR's (Engineering News-Record) top 50 electrical contractors nationwide! Join Ace Electric for a chance to work with a highly supportive and proficient team, as well as build your career with Ace University! We value the hard work of our employees, always striving to enhance skills and a positive employee workplace. Since our inception in Valdosta, GA in 1975, Ace has been performing quality electrical installations in a full range of markets including: commercial, mission critical, education, healthcare, institutional, industrial, correctional facilities, hospitality, military bases, retail and others. In the past 15 years, locations have been added in Macon, GA, Atlanta, GA, Jackson, TN, Statesboro, GA, Sanford, NC and Plain City, OH. Ace offers fabrication services, hard bid, design-build, negotiated contracts and fee-based work. We have the resources, professional staff and project management team to handle almost any type of electrical project. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year and has no signs of slowing down! Our Mission is to Identify, Hire, Train and Retain the very best people! Could that be you? Benefits: Health, Dental, Vision, Life, Disability, Accident and Critical Illness Insurances 401k with Match Access to Ace University: Apprenticeship Program, Leadership Training, Skill Building Classes and much more! General Summary: The Superintendent will oversee the operations and field personnel responsible for the installation, additions, and/or repairs of electrical systems, conductors, and associated materials/equipment for the assigned job. The Superintendent will report to the Project Manager. Preferred Job Skills: Strong commercial and industrial electrical background. Strong troubleshooting skills utilizing sophisticated test equipment (DMM, Megger, PQM, UCT, IR Camera, etc.). Strong knowledge of the National Electric Code (NEC). Ability to safely operate and maintain a specialized electrical service vehicle. Able to maintain professional appearance and conduct at all times. Able to demonstrate necessary computer and keyboard skills. OSHA 30 Hour, CPR, and First Aid trained. Ability to manage customer and company specific information and documentation in an organized manner. Able to maintain high levels of productivity, meeting deadlines while maintaining accuracy. Must be an effective and professional communicator, both written and verbally. Able to be on twenty-four hour call on a rotating basis, as needed. Mandatory Hiring Requirements: References, Background Check, Drug Screen Testing, Valid Driver's License. Responsibilities: Responsible for leading and directing all field personnel involved in the project to include orientation, time keeping, daily reports, safety reports, accident reports, and disciplinary reports. May function as the Site Safety Representative for the project. Responsible for the construction take off of the job using the bid estimate as a guideline, but will plan the job in the most efficient and profitable manner. Insure all materials are ordered and received in a timely manner to insure compliance with the job work schedule. Work closely with Fabrication to maximize the opportunity for savings regarding the installation of field materials to include the labor. Necessary to have and maintain certain personal tools as directed by Leadership. Will read and comply with all guidelines provided in the Employee Handbook, Safety Manual, or Policy and Procedure Manual, and will require any field employees under their leadership to do the same. All other duties as assigned. Position Requirements: License: Valid state driver's license. Certification: None required. Education: High School Graduate/GED required. Journeyman Electrician/completion of Apprenticeship Program required. Experience: Minimum of 6-years electrical experience preferred in industrial or commercial construction. Supervisory experience preferred. Working Conditions: Job requires working in all elements, depending on job location, time of year, heat, cold, rain, or snow. Job requires employee to have required personal tools with him at all times (waist tool belt as worn weighs approximately 30 lbs.). Work from all types of ladders and be able to transport/relocate ladders unassisted. Employee's personal weight with tools cannot exceed the rated weight capacity of ladders used. Perform work at various heights, up to 90 feet from ladders, scaffolds, aerial lifts, cat walks and other safe work areas. Work in restricted areas (switch gear-room, manholes, utility tunnels and crawl spaces). Wear personal protective equipment as required. Able to work 40 hours per week plus overtime as required, to include night shifts and out-of-town work if required. Required Physical/Mental Functions: Positively identify colors of wire and other items as required. Comprehend reading of blueprints drawings, and schematics same. Comprehend and practice safe work procedures as outlined in Company Safety Handbook. Operate company truck with manual and automatic transmission. Read and interpret maps, instructional manuals, work site directions, and written instructions. Must hear and see well (either natural or with correction). Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead. Able to lift objects weighing up to 50 pounds, with frequent lifting and carrying of objects weighing up to 20 pounds. Tolerant to prolonged standing and movement on foot. Climb ladders (all types). Repetitive use of arms, hands, and fingers. AAP/EEO Statement: Ace Electric, Inc. is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identification, national origin, disability status, protected veteran status, or any other category protected by federal, state, or local law.

Redwood Electric Group is looking for a detail-oriented and technically skilled Electrical PV Designer to support our project teams in the design and drafting of photovoltaic and energy storage systems. This role plays a critical part in ensuring the accuracy, efficiency, and code compliance of our electrical designs while collaborating closely with engineers, project managers, and construction teams. About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Duties/Responsibilities Develop electrical single-line diagrams for AC and DC PV systems. Design PV array layouts, considering site conditions, shading, and component options. Perform electrical calculations, including voltage drop, conductor sizing, and inverter loading. Select appropriate PV modules, inverters, combiners boxes, and other system components. Create detailed electrical drawings, including site plans, equipment layouts, and installation details. Ensure compliance with the California Electrical Code (CEC) and other relevant codes and standards. Utilize PV design and Autodesk software and to create accurate and efficient designs. Coordinate with structural engineers on mounting system design and integration. Collaborate with engineers, project managers, and construction teams to integrate electrical designs into overall project plans. Provide technical support during the installation and commissioning phases of PV projects. Stay up-to-date with the latest advancements in PV technology and industry best practices. Required Skills/Abilities Proficiency in AutoCAD, Helioscope, & PVsyst for electrical distribution and PV system layout. Familiarity with California Electrical Code and other relevant codes and standards. Strong problem-solving skills with an analytical approach to electrical system design. Knowledge of PV system components and distribution equipment. Ability to manage multiple projects and deadlines in a dynamic team environment. Effective verbal and written communication skills to collaborate across teams. Contribute to a team environment where your input is valued. Education and Experience Bachelor's degree in Electrical Engineering or a related field (preferred), or equivalent relevant experience. 1-2 years of experience of electrical design for a design-build electrical contractor or engineering firm. Proficiency in AutoCAD MEP. Revit is appreciated. Basic knowledge of Microsoft Office applications. Strong time management, communication, and interpersonal skills. FE (EIT certification) appreciated. LEED project experience appreciated. Working Conditions This position is based in our Santa Clara office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

Supervise all activities related to contract administration, change orders, submittals, procurement, and schedule. Have thorough knowledge of companys contracts and understanding of all parties involved. Secure all required permits and verify insura Project Manager, Manager, Project, Senior, Business Services

SIGN ON BONUS CDL Class B Driver - Operator Are you looking for a career to be home nightly, including weekends? Do you enjoy being hands-on, working outdoors and driving in a safety-first culture? If you are looking to be more than a driver, Austin Powder Company maybe the place for you. This may be your ideal career move if: You are interested in learning from a global leader all aspects of safely handling explosives as you inventory, load, unload, transport product and at our local distribution center and customer job sites. You want to be an instrumental team member driving and operating MMU's (Mobile Manufacturing Unit) and learning the technical aspects of staging our product in the field at customer job sites. If you enjoy driving, but want a balance of being hands-on, boots on the ground and staying active (ability to lift 50#). You get job satisfaction after putting in a full day's work and giving it your all Monday - Friday Have your CDL w/ Tanker/Hazmat endorsements with clean driving record (consideration will be given to CDL holders needing endorsements). HERE'S WHAT YOU GET Opportunity for Advancement - as a global leader, Austin Powder has career advancement opportunities for CDL Driver - Operator's both locally and across the U.S. CDL Drivers are local, home nightly, M - F schedule, no weekends Assurance when you are working for Austin Powder, you are family and your safety is our priority. Holiday Pay/Vacation Pay Generous benefits including medical, dental, vision, a 401(k), a flexible spending account, life insurance, AD&D insurance, short-term disability, and an employee assistance program (EAP). Employee referral program Put your career in the driver's seat and apply with our 3-minute mobile friendly application as your first step in a streamlined hiring process. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, and for inquiring about, discussing or disclosing compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Project Engineers assist the Project Manager and Superintendent with the planning and daily execution of construction projects. The Engineer is the link between management, field activities, accounting, and project administration. They also lead the management of the submittal process and approvals, coordinating the timely delivery of materials, maintaining logs, schedules, budgets, and overall facilitate a well-managed project. Successful candidates are easygoing, team-players, with strong communication, project management and client service skills. Responsibilities: Assist in bidder selection and scope of work qualification for Client RFP's and new projects. Assist in subcontractor assignment for projects. Perform some project management responsibilities (with PM oversight), such as: write and administer subcontracts/exhibits; draft cost change requests, lead meetings & job walks, Q.C. coordination, etc. Assist with aspects of the procurement process for assigned projects. Participate in OAC meetings and prepare timely and accurate meeting minutes. Estimate change orders and request pricing for potential changes or cost impacting RFI's and Submittals. Lead the document control process: Distribute plans, specifications, drawings, permits, etc. to appropriate parties and maintain the drawing revisions using PlanGrid and SharePoint applications. Evaluate, prepare, and distribute appropriate RFI's. Gather, prepare, review, and distribute submittals. Maintain accurate logs/records of the activities associated with these processes. Perform Quality Control tasks for installed materials or systems. Assist site Superintendent to resolve unforeseen challenges in the field. Develop and maintain positive relationships with the project team, the client, owner's representative, design team, subcontractors, and others. Support the Superintendent in managing and updating the Project Schedule with confirmed lead-times of materials. Manage the punch-list and close-out process; including warranty, O&M, and as-built documentation collection completed by the Project Coordinator. Always promote the highest level of professionalism and ethics Promote safety policies and procedures and assist in those practices as needed. Knowledge, Skills, and Abilities: Prior experience in the construction industry is preferred. Bachelor's degree in Construction Management, Engineering, or equivalent combination of education and experience. Fundamental knowledge of basic construction materials and methods. Basic understanding of the technical and business aspects of construction project management. Understanding of the building permit approval process. Ability to learn and master required technology and software applications, including the MS Office 365 Suite, MS Project; as well as BlueBeam, GreenHalo, Autodesk Build, etc. Strong interpersonal communication skills. Job Type: Full-time Pay: $90,000.00 - $110,000.00 per year Benefits: 401(k) 401(k) matching Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Parental leave Retirement plan Vision insurance Schedule: 8 hour shift Monday to Friday Education: Bachelor's (Required) Experience: Construction management: 3 years (Required) Work Location: In person

FLSA Status: Non-Exempt Summary: Received, stores, and issues hand tools, machine tools, dies, materials, and equipment in industrial establishment by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. Issues tools and equipment to workers and maintains records of tools and equipment issued and returned. Locates lost or misplaced tools and equipment. Prepares periodic inventory or maintains perpetual inventory of tools and equipment. Received, unpacks, and stores incoming tools and equipment, and requisitions stock to replenish inventory. Inspects and measures tools and equipment for defects and wear and reports damage or wear to supervisors. Repairs, services, and lubricates tools and equipment. Delivers tools or equipment to workers. Marks and identifies tools and equipment. Supervisory Responsibilities: This job has no supervisory responsibilities. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Associate degree or equivalent from two-year college or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to subtract two-digit numbers and to multiply and divide with 10s and 100s. Ability to perform these operations using units of American money and weight measurement, volume, and distance. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Other Qualifications: Must be able to travel and have good driving record. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 50 pounds, frequently lift and/or move up to 100 pounds and occasionally lift and/or move more than 100 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles and outside weather conditions. The employee is occasionally exposed to vibration. The noise level in the work environment is usually loud. CSE offers competitive wages, vacation/personal time, medical, dental, vision, and other competitive benefits, including a 401k plan. INTENT AND FUNCTION OF S s assist organizations in ensuring that the hiring process is fairly administered and that qualified employees are selected. They are also essential to an effective appraisal system and related promotion, transfer, layoff, and termination decisions. Well-constructed s are an integral part of any effective compensation system. All descriptions have been reviewed to ensure that only essential functions and basic duties have been included. Peripheral tasks, only incidentally related to each position, have been excluded. Requirements, skills, and abilities included have been determined to be the minimal standards required to successfully perform the positions. In no instance, however, should the duties, responsibilities, and requirements delineated be interpreted as all inclusive. Additional functions and requirements may be assigned by supervisors as deemed appropriate. In accordance with the Americans with Disabilities Act, it is possible that requirements may be modified to reasonably accommodate disabled individuals. However, no accommodations will be made which may pose serious health or safety risks to the employee or others or which impose undue hardships on the organization. Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law. I, JS_8.1.3,JS_8.1.3.1,JS_8.1.3.5,JS_8.1.5,JS_8.1.5.1,JS_8.1.5.2,JS_8.1.5.3,JS_8.1.5.4,JS_8.2.1,JS_8.2.1.1,JS_8.2.1.2,JS_8.2.1.3,JS_8.2.1.4,JS_8.2.1.5,JS_8.2.2,JS_8.2.2.1,JS_8.2.2.2,JS_8.2.2.4,JS_8.2.3,JS_8.2.3.2,JS_8.2.3.3,JS_8.2.6,JS_8.2.6.1,JS_8.2.5,JS_8.2.5.1,JS_8.2.5.4,JS_8.2.5.6,JS_8.3.3,JS_8.3.3.1,JS_8.3.3.5,JS_8.3.5,JS_8.3.5.1,JS_8.3.5.2,JS_8.4.2,JS_8.4.2.3,JS_8.4.2.2,JS_8.4.2.4,JS_8.4.3,JS_8.4.3.1,JS_8.4.3.2,JS_8.4.3.3,JS_8.4.3.4,JS_8.4.4,JS_8.4.4.1,JS_8.4.4.2,JS_8.4.4.3,JS_8.4.4.4,JS_8.4.4.5,JS_8.4.5,JS_8.4.5.1,JS_8.4.5.2,JS_8.4.5.3,JS_8.5.6,JS_8.5.6.1,JS_8.5.6.2,JS_8.5.6.3,JS_8.5.6.4,JS_8.5.6.5,JS_8.5.7,JS_8.5.7.1,JS_8.5.7.2,JS_8.5.7.3,JS_8.5.7.4,JS_8.5.8,JS_8.5.8.1,JS_8.5.8.2,JS_8.5.8.3,JS_8.5.8.4,JS_8.5.8.5,JS_8.5.8.6,JS_8.5.9,JS_8.5.9.1,JS_8.5.9.2,JS_8.5.9.3,JS_8.5.9.4,JS_8.5.9.5,JS_8.5.10,JS_8.5.10.1,JS_8.5.10.2,JS_8.5.10.3,JS_8.5.10.4,JS_8.5.11,JS_8.5.11.1,JS_8.5.11.2,JS_8.5.11.3,JS_8.5.11.4,JS_8.5.12,JS_8.5.12.1,JS_8.5.12.2,JS_8.5.12.3,JS_8.5.12.4,JS_8.5.1,JS_8.5.1.1,JS_8.5.1.2,JS_8.5.1.3,JS_8.5.1.4,JS_8.5.2,JS_8.5.2.1,JS_8.5.2.2,JS_8.5.2.3,JS_8.5.3,JS_8.5.3.1,JS_8.5.3.2,JS_8.5.3.3,JS_8.5.3.4,JS_8.5.3.5,JS_8.5.4,JS_8.5.4.1,JS_8.5.4.2,JS_8.5.4.3,JS_8.5.4.4,JS_8.5.4.5,JS_8.5.4.6,JS_8.5.5,JS_8.5.5.1,JS_8.5.5.2,JS_8.5.5.3,JS_8.5.5.4,JS_8.5.5.5

Safety Department About The Role We are looking for an Assistant Safety Director to join our Safety team on our project in Ashburn, Virginia. This is a full-time, in-person position. Key Responsibilities Lead and manage on-site safety efforts on large-scale mission-critical, aviation, and other complex market types by working collaboratively with project superintendents, project managers, and client safety representatives to execute Holder's “Plan. Execute. Learn” Safety Culture Utilize and implement industry best practices to promote a world-class safety culture focused on preventing SIFs Manage and mentor trade partners to implement robust and effective safety programs on site Share and provide technical knowledge with the project team to proactively manage hazardous energy control, crane lifts, and other high-risk activities by ensuring appropriate safety controls are in place Manage site-specific insurance programs and assist with case/injury management Track and trend safety data to help proactively manage safety efforts Manage safety material and equipment procurement to support project needs and Holder self-perform work Monitor daily construction activities for compliance with OSHA and company rules/policies Manage and coordinate on-site training, wellness, and Holder/client-driven initiatives Qualifications Required: 5-15 years of construction safety experience managing complex, large-scale projects including mission-critical, heavy industrial, oil/gas, etc. Formal safety training and competency in hazardous energy control and LOTO, scaffolding, crane management, steel erection, emergency response, fall management, excavation and confined space, rigging, hazardous waste, and NFPDS/erosion control Ability to identify and correct safety deficiencies in the field Excellent interpersonal skills with the ability to interact effectively with employees at all levels in a construction environment Strong communication skills across all levels of the organization Proficiency with Microsoft Office applications including Word, Excel, PowerPoint, and other technology applications used to support safety efforts Preferred Experience with a general contractor and managing large safety teams Bachelor's degree, preferably in Safety Management Professional safety certifications (e.g., CSP, CHST, SMS)

Summary Welds metal parts with welding equipment as specified by layout, welding diagram, or work order by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. 1. Understands OSHA, AISC & AWS Standards relating to welding and that working safely is a job requirement. Understands and complies with CSE, Inc. Safety Program, rules, regulations and updates; works within AISC Standard Practice codes relating to welding *Becomes familiar with supervisory personnel, job activity to be performed, site hazard communication program, site safety rules and regulations, and site emergency action** 2. Follows directions and assumes responsibility of assisting Foreman on site by completing the following tasks: Assists with inspecting and identifying hazards associated with all welding Positions parts in jigs or fixtures on bench floor, or clamps parts together along with layout Obtains specified electrode and inserts electrode into portable threads consumable electrode wire through portable welding Selects torch, torch tip, filler rod and flux, according to welding chart specifications or type and thickness of Connects cables from welding unit to obtain amperage, voltage, slope, and pulse; Connects regulator valves and hoses to oxygen and fuel gas cylinders, and welding Strikes (forms) arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work Turns regulator valves to activate flow of gases, lights torch and adjusts gas mixture and pressure to obtain desired Manually guides electrode or gun along weld line, maintaining length of air and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten Holds torch at proper angle and guides along weld joint, applying filler rod to molten area to form Fits materials together prior to Has thorough knowledge in fabrication including lay-out, cutting, grinding Has the ability to weld FCAW, SMAW, and3. Assumes responsibility of inspecting equipment, structures and/ or material Examines weld for bead size and other Repairs broken or cracked metal objects, fills holes, and builds up metal Prepares parts for welding by grooving or scarfing surfaces; Welds along vertical flat, horizontal or overhead weld Scarfs or grooves weld prior to applying filler metal; Chips or grinds off excess weld, slag, or Cleans or degreases weld joint or work piece; tacks assemblies* Supervisory Responsibilities: This job has no supervisory responsibilities. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty safely and satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience:2+ years of experience. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Mathematical Skills: Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of weight measurement, volume, and distance. Reasoning Ability: Ability to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: Welding Certification, Valid Drivers License Other Qualifications: Must be able to travel. Must be able to pass a pre-employment drug screen. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 50 pounds, frequently lift and/or move up to 100 pounds and occasionally lift and/or move more than 100 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles and outside weather conditions. The employee is occasionally exposed to vibration. The noise level in the work environment is usually loud. CSE offers competitive wages, vacation/personal time, medical, dental, vision, and other competitive benefits, including a 401k plan. INTENT AND FUNCTION OF S s assist organizations in ensuring that the hiring process is fairly administered and that qualified employees are selected. They are also essential to an effective appraisal system and related promotion, transfer, layoff, and termination decisions. Well-constructed s are an integral part of any effective compensation system. All descriptions have been reviewed to ensure that only essential functions and basic duties have been included. Peripheral tasks, only incidentally related to each position, have been excluded. Requirements, skills, and abilities included have been determined to be the minimal standards required to successfully perform the positions. In no instance, however, should the duties, responsibilities, and requirements delineated be interpreted as all inclusive. Additional functions and requirements may be assigned by supervisors as deemed appropriate. In accordance with the Americans with Disabilities Act, it is possible that requirements may be modified to reasonably accommodate disabled individuals. However, no accommodations will be made which may pose serious health or safety risks to the employee or others or which impose undue hardships on the organization. Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law.

Job Description Department: Maintenance Reports To: Maintenance Manager FLSA Status: Non-Exempt Summary: Responsible for repairing, setting up, assembling, adjusting, and maintaining any and all types of construction equipment owned by CSE. Essential Duties and Responsibilities include the following. Other duties may be assigned. a.Receives, stores, and draws supplies and tools for use on a project. b.Performs proper procedures for the care of existing tools. c.Schedules preventative maintenance and required repairs on fixed and mobile equipment. d.Assembles, sets up, adjusts, maintains, and repairs any and all types of equipment including but not limited to: vehicles, forklifts, tractors, trailers, and cranes. e.Performs major and minor repairs on company vehicles; Services with fuel, oil, air, water, and fluids on a rotational basis. Checks alignment of steering wheel and rotates tires. f.Uses a cutting torch, brazes and welds as necessary. g.Demonstrates proficiency for diagnosing and repairing equipment in a safe and productive manner. h.Familiar with local, state, and federal Occupational Safety and Health Administration (OSHA) rules and regulations, CSE, Inc. Rules and Regulations and Site-Specific Rules and Regulations. Supervisory Responsibilities: This job has no supervisory responsibilities. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: One to three years related experience and/or training. ASE Certification preferred. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to write routine reports and correspondence.Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.Ability to deal with problems involving a few concrete variables in standardized situations. Other Qualifications: Must be able to travel and have a valid driver's license. Must be able to pass a pre-employment drug screen. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must regularly lift and /or move up to 50 pounds, frequently lift and/or move up to 100 pounds and occasionally lift and/or move more than 100 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles and outside weather conditions. The employee is occasionally exposed to vibration. The noise level in the work environment is usually moderate. CSE offers competitive wages, vacation/personal time, medical, dental, vision, and other competitive benefits, including a 401k plan.

Summary/Objective: The Structural Engineer position is primarily focused on mechanical structures and supports for our industrial and commercial divisions (local and national accounts). This position works closely with our Project Leaders and our in-house design teams to provide designs and concepts along with professional guidance when needed. This may include leading or participating in discussions with other stakeholders on designs including stamping any self-performing work. Site visits are expected to collect information on design builds and other verifications from time to time. Essential Functions: Provide structural guidance during estimating toward the development of project proposals Review project scopes to ensure compliance with applicable codes and standards Performs structural analysis and designs for a variety of projects with a focus on but limited to mechanical platforms, supports, and racks for large commercial and industrial projects. Prepare, review, and stamp structural drawings, calculations, and specifications. Collaborate with architects, project managers, and other engineering disciplines to develop integrated project solutions. Provide leadership and support for the structural department. Oversee the creation and development of structural models on self-performing and design assist projects in Revit and/or Tekla to coordinate between structures, and other disciplines. Conducts shop and/or field investigations for site conditions and inspections. Performs other duties as assigned Supervisory Responsibility: Yes Required: Bachelor's degree in engineering preferably structural or civil focused Active PE license in Virginia (Structural focused preferred), or SE licensed preferred 5+ years of structural industrial experience to include any combination of crane design & guidelines or foundations is preferred or other related experience or education in combination Work in house at our Richmond VA headquarters Proficient with structural design software including implementation and management of programs such as STRUDL or other equivalent software. Strong knowledge of IBC. ACI, AISC, and other applicable codes/standards Intermediate knowledge of Revit and/or Tekla (Tekla is preferred or willingness to learn Tekla) Strong knowledge of MS Office applications, including Bluebeam Revu Comfortable working with 3D environments using the Navisworks platform and point cloud scans Superior communication and interpersonal (tact, diplomacy, influence, etc.) skills are essential to this role Must be able to multi-task, work with minimal supervision, follow written and oral instructions, show attention to detail and demonstrate problem-solving skills Must adhere to all company policy and procedures Must be available to work assigned schedules The work environment and physical demands required would be representative of those that must be met by an employee to successfully perform the essential functions of this job, and may include, but are not limited to the following: Work Environment: Works in a professional office environment and routinely uses standard office equipment Position may require visits to the shop and construction sites Physical Demands: This role routinely uses standard office equipment such as computers, phones, photocopier, filing cabinets and fax machines Some climbing and comfort in lifts and high places Travel: May require infrequent travel (typically not overnight) Preferred: MS Project or other scheduling software tools 3D modeling experience (Revit, Tekla, AutoCAD, Inventor, Navisworks) PDF Editing software (Bluebeam, Adobe) Familiarity with cloud based PM software Prior military experience

Fencecorp, Inc. is a leader in providing high-quality fencing solutions for commercial and light industrial projects. We pride ourselves on our commitment to excellence and our ability to meet the unique needs of our clients, especially within the public works sector. We are seeking an experienced and dedicated Inside Sales Representative to join our team. This role will focus on working directly with public works General Contractors on commercial and light industrial projects. The ideal candidate will have a strong background in the fencing industry for public works projects, though candidates with experience in other sectors within the commercial/light-industrial construction industry will also be considered. Key Responsibilities: - Establish and maintain relationships with public works General Contractors. - Read and interpret project plans and bid documents. - Use Bluebeam software to analyze and break down project plans. - Communicate effectively with vendors and prime contractors. - Participate in job walks and site visits as required. - Prepare and present detailed proposals and quotations for projects. - Negotiate contracts and close sales to meet or exceed sales targets. - Provide excellent customer service and support throughout the project lifecycle. Qualifications: - Minimum of 5-6 years of experience in the fencing industry for public works projects or in the commercial/light-industrial construction industry. - Proficiency in reading and interpreting construction plans and bid documents. - Experience using Bluebeam and Procore software. - Strong communication and negotiation skills. - Ability to work independently and manage multiple projects simultaneously. - Comfortable with job walks and site visits. - Excellent organizational and time-management skills. Preferred Qualifications: - Established network within the public works and commercial construction sectors. - Previous experience working with public works General Contractors. - Strong problem-solving skills and attention to detail. Benefits: 401(k) Cell phone reimbursement Dental insurance Health insurance Life insurance Mileage reimbursement Paid time off Travel reimbursement Vision insurance

Lead all activities related to contract administration, change orders, procurement, schedule, and financial reporting. Have thorough knowledge of the company's contracts and understanding of all parties involved. Secure required permits and verify in Project Manager, Manager, Civil, Leadership, Construction, Business Services

The Principal Fire Protection and Wildfire Compliance Engineer is a highly specialized senior-level technical expert responsible for managing fire and life safety across the utility's infrastructure, with a specific focus on complex technical occupancies, hazardous environments, and comprehensive regulatory compliance. This role combines advanced fire protection engineering with a hands-on tactical understanding of emergency operations and a deep knowledge of specialized fire codes. The engineer will provide authoritative oversight of fire protection plan review and field inspections, integrating technical requirements into the utility's broader wildfire and property loss control strategies. Key Responsibilities Regulatory Plan Review and Enforcement Lead the fire protection plan review process for all utility facilities and construction projects, including those with special technical occupancies (e.g., generation plants, advanced control centers) and hazardous environments (e.g., fuel storage, chemical treatment facilities). Serve as the primary liaison with fire marshals, regulatory bodies, and other authorities having jurisdiction (AHJ) during plan reviews, inspections, and enforcement actions. Develop and maintain a robust system for tracking regulatory compliance, corrective actions, and documentation across all fire protection activities. Hazardous Environment and Special Occupancy Loss Control Conduct advanced risk assessments and loss control evaluations for special technical occupancies and areas with hazardous materials, identifying potential fire ignition sources, propagation risks, and mitigation measures. Specify and review the design of specialized fire suppression systems, detection systems, and fire-resistant construction for these high-risk areas, ensuring compliance with relevant NFPA standards (e.g., NFPA 30, NFPA 850) and OSHA requirements. Evaluate potential environmental impacts and associated regulatory reporting requirements related to fire and hazardous materials incidents. Utility and Wildfire Fire Operations Provide expert guidance and operational readiness evaluation, drawing on fire operations experience to inform the utility's wildfire response plans and procedures. Collaborate with internal and external fire agencies on pre-incident planning, tactical response strategies, and incident command system integration. Conduct post-incident analysis for fires impacting special occupancies or hazardous environments, using findings to drive improvements in engineering, procedures, and training. Program Evaluation and Risk Modeling Assess the effectiveness of the utility's Fire Prevention Plan (FPP) and Wildfire Mitigation Plan (WMP), particularly as they apply to hazardous environments and special occupancies. Manage and evaluate the use of wildfire risk modeling software and operational tools, incorporating specialized data related to hazardous materials and facility vulnerability. Cross-Functional and Executive Reporting Act as a technical subject matter expert for executive leadership and legal counsel, providing clear and concise report on fire protection compliance, loss control, and risk exposure. Lead cross-functional teams involving engineering, operations, safety, and environmental departments to ensure seamless integration of fire and life safety requirements. Qualifications Experience 10+ years of progressive experience in fire protection engineering, including extensive experience with regulatory plan review, field inspections, and loss control. Proven experience conducting fire and hazardous materials risk assessments in industrial or utility settings, particularly involving special technical occupancies and high-hazard environments. Demonstrated experience in fire operations, with a deep understanding of incident command, emergency response, and firefighting tactics. Expert-level knowledge of NFPA codes and standards applicable to utilities and hazardous environments (e.g., NFPA 30, 70, 850, 101). Education and Certification Bachelor's degree in Fire Protection Engineering, Electrical Engineering, or a related field. Master's degree preferred. Professional Engineer (PE) license is required. Certified Fire Protection Specialist (CFPS) is highly desirable. Skills Expert knowledge of fire science, hazardous materials behavior, electrical systems, and relevant regulatory codes (e.g., NFPA, OSHA, EPA). Advanced proficiency in plan review processes, inspection protocols, and fire investigation techniques. Exceptional written and verbal communication skills, with the ability to convey complex technical and regulatory information to diverse audiences, from field crews to executive leaders. Ability to balance technical requirements, regulatory mandates, and operational realities in a high-risk environment. Working Conditions Regular travel for inspections approximately 25% of the time. The role involves a mix of office-based work and significant fieldwork in diverse and potentially hazardous environments. The position demands flexibility and may require irregular hours during fire events, emergencies, and regulatory deadlines. #J-18808-Ljbffr