Computer numerical controller machinist jobs in Auburn, AL - 369 jobs

Summary/Objective The CNC Operator (all levels needed) will operate equipment according to established procedures in a safe and quality manner. Dimensional measurements will be required during the operation of equipment to assure compliance to requirements. Adjustments to the equipment will be executed during the operation of equipment to meet established run rates and part accuracy. This involves performing First Piece Inspection and continuous Quality activities. Equipment will include Mills, Lathes, CNC's and screw machines. Essential Duties & Responsibilities Implement and sustain S, Q, D, C, I activities Develop, sustain and improve CNC machine tool methods and procedures Assist tool selection in the development and implementation of fixtures for new product development Develop standard work, tool setup sheets, and standard operations for production jobs Troubleshoot various problems (improper tooling, dull tools, wrong location of machined feature, code errors, etc.) and develop corrective action to prevent reoccurrence Perform Quality Assurance activities while operating equipment (Optical systems, calipers, gages, indicators) Participate in Productive Maintenance activity Supervisory Responsibilities This position has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Interpret technical prints (GD&T) Must have basic knowledge of CNC machine “G-Code” and troubleshooting skills Experience maintaining and changing tools Experience determining offsets and adjusting accordingly Interpret Work Orders and enter data into the Manufacturing database (ERP) Education/Experience Required: High School Diploma or GED Preferred Minimum 1 year of experience in machining or related mechanical field Vocational/Technical Degree Lean manufacturing experience Kaizen event experience 5S knowledge and experience Language Skills Ability to read, write, listen and follow instructions. Ability to read blueprints. Mathematical Skills Basic shop math and precision measurement skills. REASONING ABILITY Ability to make adjustments as needed by following SOP's. Travel Requirements Travel will normally be less than 5% (training, equipment development, satellite facility support). Other Skills & Abilities Attendance is an essential job requirement defined as having regular, consistent, reliable, punctual and predictable attendance including the ability to work regular hours and shifts, overtime before and after shifts and on weekends. Ability to work as part of a team, including all related departments/plants or independently as required to achieve internal and external customer satisfaction. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. While performing the duties of the job the employee works in a manufacturing environment and may be exposed to fumes or airborne particles, moving mechanical parts and vibration. PHYSICAL ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to talk or hear. The employee is frequently required to sit and use hands to touch, handle, or feel. The employee is occasionally required to stand, walk, reach with hands and arms, climb or balance and stoop, kneel, or crouch. The employee is occasionally required to lift up to 50 pounds. The vision requirements include close vision and ability to adjust focus. WORK AUTHORIZATION This position requires compliance with ITAR requirement. Must be a “U.S. Person” (per ITAR 120.15) and are required to show proof substantiating this upon being hired. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties and/or responsibilities may change at any time with or without notice at the sole discretion of the Company.

Machinist - Level III Tuscaloosa, AL A manufacturing organization is seeking a Level III Machinist to produce precision components and tooling using a variety of manual and CNC machining equipment. This role involves interpreting complex blueprints, drawings, and verbal instructions to manufacture medium- to high-complexity parts while maintaining strict dimensional tolerances and quality standards. The Machinist may also support prototype development and collaborate with engineering teams on new product and process improvements. Key Responsibilities Set up, operate, and maintain CNC milling and turning centers in accordance with detailed blueprints, job routings, and work instructions. Review and retrieve job-related documentation, including part drawings, tooling lists, and manufacturing instructions. Select appropriate cutting tools, fixtures, and workholding methods for a variety of materials and machining operations. Perform complex machining operations for both proven and unproven parts, including prototype and experimental work as required. Install, align, secure, and adjust cutting tools and workpieces; monitor machine feeds, speeds, and offsets to ensure optimal performance. Use precision measuring instruments (e.g., calipers, micrometers, gauges) to verify dimensions and maintain tight tolerances. Inspect finished parts for defects and ensure compliance with quality and specification requirements. Deburr and finish all machined surfaces to meet engineering and quality standards. Accurately document production quantities, inspection results, and required processes within an ERP or manufacturing system. Participate in continuous improvement initiatives to enhance machining efficiency, quality, and safety. Maintain a clean, organized, and safe work environment in compliance with all safety regulations. Assist with the development of new machining methods, tooling, or process improvements for complex components. Perform additional duties as assigned. Qualifications Experience & Education 6-8 years of hands-on machining experience in a manufacturing environment. High school diploma or equivalent, with additional technical or vocational training preferred. Technical & Professional Skills Strong attention to detail and commitment to precision workmanship. Ability to interpret customer specifications, engineering drawings, and technical documentation. Proficiency with basic computer systems and manufacturing software. Solid problem-solving and troubleshooting skills. Proficient use of precision measuring tools, including calipers and micrometers. Strong mathematical skills, including fractions and basic arithmetic. Effective communication skills and the ability to work collaboratively in a team environment. Thorough understanding of workplace safety requirements and best practices. Commitment to maintaining a clean and organized work area. Physical Requirements Ability to lift and/or move materials weighing up to 50 pounds. Visual acuity including close vision, distance vision, depth perception, and the ability to adjust focus. Manual dexterity to handle tools, components, and equipment for extended periods. Ability to stand, walk, and perform repetitive tasks for prolonged periods of time. Additional Information Supervisory Responsibilities: None Travel: Not required

Responsibilities: Run diagnostic tests on heavy-duty diesel-powered vehicles Repairs, maintenance and servicing large straight trucks, and busses, Analyze diagnostic test results Test drive vehicles to gauge performance Perform preventative maintenance Maintain detailed records of service vehicles Qualifications: Three years' experience in diesel engine repair Advanced knowledge of diesel engine technology and components Mechanical aptitude and problem solving Proficiency in operating all types of vehicles, equipment and tools Able to work in a fast paced, demanding environment Good interpersonal skills with Supervisors and Co-workers Willing to obtain factory certifications Ability to lift heavy equipment Valid driver's license with acceptable driving record Class B CDL -preferred, not required Monday through Friday 8am-5pm

Logan Industries is currently searching for a Manual Machinist at our Theodore, Alabama facility. . In this role, you will be responsible for machining and manufacturing products for customers in a cost-efficient manner. This role requires proficiency in setting up and operating manual machine shop equipment. Successful candidates are self-motivated and skilled in using calibrated equipment (e.g., calipers, micrometers) to measure component characteristics and ensure conformance prior to assembly. Additional competencies include interpreting manufacturing drawings, service manuals, and work instructions. RESPONSIBILTIES: Manufacturing customer parts efficiently to meet quality standards and routed hours, supporting company profitability. Perform preventive maintenance on assigned equipment and keep it clean and in good operating condition. Ensure manufactured work meets customer requirements; report nonconformances to the Quality Department before inspection. Document work activity using manufacturing IT systems (e.g., routers, forms). Log time accurately on router operations using scanners and input stations. Complete daily production tasks as assigned by the supervisor. Adhere to all company safety policies and contribute to safety improvements (e.g., Job Safety Analyses). Collaborate with the supervisor on process improvement ideas to enhance departmental efficiency. Maintain a clean work area and apply 5S principles daily. Stay aware of the Quality Management System and your role in supporting the Quality Policy. Complete and maintain all required reports and records (e.g., Quality Plans, ITPs, routers, inspection reports). Perform other duties as assigned. SKILLS REQUIREMENTS: Proficient in using inspection tools (micrometers, Vernier calipers, gauges). Ability to interpret manufacturing drawings, schematics, and GD&T. For CNC Machinists: - Verify CNC technology readiness and optimization, report issues or improvement needs. - Ensure programming is completed before releasing jobs for production. Skilled in general hand tool usage (must have tools). Understand and follow quality system procedures, work instructions, and process maps. Knowledge of ISO 9001 and API Q1 standard requirements. Strong verbal and written communication skills. Ability to read and write in English. EXPERIENCE REQUIREMENTS: General Machinist: Minimum 5 years of experience with manual machine shop equipment (e.g., lathes, mills, grinders) or equivalent formal education. CNC Machinist: - Experience with tools like GibbsCAM for machine setup and programming. - Ability to interpret CAD drawings, 3D models, and customer requirements to ensure accurate programming and quality production. We also offer a full benefits package including: Generous PTO Medical Dental Vision 401k- Employer Matching FSA/HSA Employer Paid LTD/STD + $50k Group Term Life Accident Critical Illness Hospital Indemnity VTL

Qualification Requirements: Physical Requirements: Good hearing and able to communicate effectively. Able to work comfortably in dangerous work environments. Requirements: Must be at least 18 years of age. Able to identify shop safety hazards. Strong knowledge of safety requirements. Attention to detail. Knowledge of metals and their properties. Ability to produce high quality work. Able to understand spoken and written English effectively. Able to pass post offer substance testing. Essential Functions: Uses a variety of tools to measure, calculate, cut and modify materials. Processes skills and knowledge to safely operate machine shop tools and equipment. Follows established manufacturing methods using standard machine tools, materials and equipment. Adjusts feeds, speed, and depth of cut to machine quality. Reads diagrams and blueprints and manufactures metal parts to precise specifications. Set up tools such as milling machines, grinders, lathes and drilling machines. Correctly use precision measuring tools. Routinely maintains equipment to ensure cleanliness, accuracy and reliability. Physical Demands: Physically demanding job which requires lifting heavy objects, twisting, bending and reaching. Must be physically agile and able to work in confined spaces as well as high elevations. Work Environment: Exposure to varying extreme climates and outside weather conditions (heat/cold, wet/humid). BE SURE TO APPLY ON OUR WEBSITE: ****************

Operates CNC Machining Centers to produce parts to Customer Specifications. Loads and Runs CNC programs. De-Burrs parts and cleans as time allows. Performs routine maintenance on Machining Centers, such as filling way oil. All Job Posting Locations (Location) Wetumpka Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.RequiredPreferredJob Industries Other

Job Description We are hiring multiple CNC Machinists across junior and senior skill bands to support a high-mix, low-volume precision machining environment producing complex, tight-tolerance parts. We're experiencing strong growth and scaling our machining team accordingly, building a balanced crew of developing talent and seasoned experts. You'll find the best of both worlds here: the pace and variety of a job shop, paired with the stability, benefits, and progression of a well-run operation that rewards growth. We're hiring on every shift and offer consistent overtime to those who want it, but rarely required for those who don't. This is not a button-pushing role. Our machinists own work end-to-end, from setup through final inspection, and play a direct role in quality, delivery performance, and continuous improvement. If you have strong fundamentals, a genuine passion for machining, and the skill to prove it, we want to talk. Compensation Junior Machinist: $26 - 33 / hr Senior Machinist: $33 - $45 / hr Night Shift Differential: $3 /hr Weekend Shift Differential: $4 / hr Shifts Day Shift (4 x 10s) 6:00am - 4:30pm Night Shift: (4x 10s) 4:30pm - 3:00am Weekend Shift: (3 x 12s, paid for 40), Friday - Sunday, 6:00am - 6:30pm Consistent Overtime 10+ hours / week for those who want it Rarely required for those who don't Benefits $5-7k of relocation assistance (to Tuscaloosa, AL) Medical, dental, vision 401(k) with match PTO Depending on skill level, you will be responsible for: Set up and operate CNC milling and turning centers in a precision, job-shop environment Run work end-to-end: setup, run, inspect, and document results Interpret complex blueprints, routings, and work instructions Select tooling, establish offsets, and build effective workholding strategies Perform manual measurement and inspection using micrometers, gauges, indicators, and other precision tools Hold tight tolerances and own part quality from first piece through final run Read and understand CNC programs; make edits and adjustments as required Troubleshoot dimensional, tooling, and process issues to restore quality and throughput Support setup of proven and unproven parts based on capability Maintain a clean, safe, and organized work area Participate in continuous improvement and process optimization efforts Requirements We are hiring for two primary profiles and will align level and pay to demonstrated capability. Junior CNC Machinist: This profile is ideal for a machinist with strong fundamentals who is ready to take the next step. You likely bring: A few years of machining experience with the ability to run your own setups on medium-complexity parts Experience on mills and/or lathes in a precision environment Confidence using manual inspection tools (calipers, micrometers, indicators) and holding consistent tolerances Ability to read programs, make small edits/offset changes, and calibrate or verify machine condition as needed Strong coachability, ownership mindset, and a desire to grow into advanced setups and tighter tolerances Senior CNC Machinist: This profile is for a true setup expert who can take on complex, tight-tolerance work, including parts the shop hasn't seen before, and dial them in efficiently. You likely bring: 7+ years in precision machining (more is welcome) Proven experience holding .0005” (5 tenths / ~13 microns) or tighter on critical features, with the ability to verify those tolerances manually Strong ability to interpret complex technical drawings and apply GD&T (e.g., true position, parallelism, profile, concentricity, flatness, coaxiality) Experience setting up multi-axis equipment (5-axis mills and/or mill-turn / multi-axis lathes) Ability to fluently read G-code / M-code and efficiently edit programs to maintain quality and throughput Background in high-setup environments (often 30%+ setup time) and complex setups with 10+ tools (and potentially far more) Experience setting up unproven parts and troubleshooting tooling/process/machine variables to achieve first-article success Strong documentation habits, teamwork, communication, and an unwavering commitment to safety and craftsmanship Benefits Benefits Medical, dental, vision 401(k) with match PTO

Job Description We are seeking a skilled CNC Machinist to join our dynamic team. The ideal candidate will have experience in operating CNC machinery, interpreting technical drawings, and producing precision parts to meet strict tolerances and quality standards. If you are detail-oriented, possess strong technical skills, and thrive in a fast-paced environment, we want to hear from you! Key Responsibilities: Set up and operate CNC machines (lathes, mills, routers, etc.) to produce high-quality components. Read and interpret technical drawings, blueprints, and CAD files to determine machining specifications. Monitor machine operations and make adjustments as necessary to maintain tolerances and quality. Conduct routine maintenance on CNC equipment and troubleshoot issues as they arise. Perform quality checks on finished products using measuring tools (calipers, micrometers, gauges) to ensure accuracy. Collaborate with engineers and other team members to improve production processes and enhance efficiency. Maintain a clean and organized workspace, adhering to safety protocols and company policies. Document production activities and maintain accurate records of work performed. Qualifications: High school diploma or equivalent; technical degree or certification in CNC machining preferred. Proven experience as a CNC machinist or similar role. Proficient in reading blueprints and technical drawings. Strong knowledge of CNC programming (G-code, M-code) and operating procedures. Familiarity with various machining tools and equipment. Excellent attention to detail and problem-solving skills. Ability to work independently and as part of a team. Strong communication skills and a commitment to safety.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. Operates both manual and CNC equipment for the efficient production of quality components. Responsible for the production of high-tolerance precision parts. What You'll Do as a CNC Machinist I Interpret technical prints. Setup, operate and adjust machining equipment for production efficiency with supervision. Monitors quality of parts produced to ensure customer requirements are met. Abides by all Company safety and health policies and procedures. Must use personal protective equipment if required. Aware of and conforms to company ISO goals and objectives, and supports company ISO requirements. Aware of and actively participates in company's Lean philosophy of continuous improvement. Ensures measuring devices used to check product quality are calibrated prior to use. Maintains in-process product identification. Follows procedure for handling nonconforming parts The Experience, Skills and Abilities Needed Required: High school diploma or equivalent Vocational/Technical - CNC Machining degree or Minimum one plus years CNC Machine operation Knowledge of MS Office applications including Word, Excel Preferred: Vocational/Technical CNC Machining, Machine/Tool Technology degree Minimum two to three years CNC Machining operation Data entry system experience CAM software reading experience Experience reading and interpreting technical drawings What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being and financial future. Here is a brief overview of what we offer: Market Competitive Pay with shift differential Climate controlled facility Extensive Paid Time Off and (9) added Holidays Excellent Healthcare, Dental and Vision Benefits Long/Short Term Disability Coverage 401(k) with a company match Maternity and Paternity Leave Additional add-on benefits/discounts for programs such as Pet Insurance Tuition Reimbursement and continued education programs Excellent opportunities for advancement in a stable long-term career Pay range for this opportunity is $20.43 - $26.44. This position is incentive plan eligible, at target earnings of 3%, depending on performance. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. Req ID: 51544 Job Category: Maintenance/Skilled Trades Location:RequiredPreferredJob Industries Other

Full-time Description Competitive Pay $3.00 - 2nd Shift Differential Key Responsibilities The CNC Machinist is responsible to operate one or more machine tools or special purpose machines to machine metal parts to required specifications. Key Deliverables of the Position · Run Standard operating procedures on multiple axis machines · Contact Manufacturing Services to troubleshoot process problems · Change perishable tooling when required · Install new tool holders · Follow set up instructions to set up CNC machines · Following inspection plans to inspect parts · Communicate to co-workers on status of cell operations · Participate in continuous improvement activities · Troubleshoot tooling as required · Work holding (fixturing - chucking) Requirements Required Education and Experience High School Diploma or GED required; a minimum of 5 years of experience with manual and CNC machines, multi-axis preferred. Required Technical Competencies · Competency in Machining Skills o Fixturing o Chucking o Work holding · Problem Solving and Troubleshooting Skills Required Behavioral Competencies Quality Oriented -- Accomplishes tasks by considering all areas involved, no matter how small; shows concern for all aspects of the job; accurately checks processes and tasks; is watchful over a period of time. Contributes to Team Success -- Actively participates as a member of a team to move the team toward the completion of goals. Applied Learning -- Assimilates and applies new job-related information in a timely manner. Initiates Action - Takes prompt action to accomplish objectives; takes action to achieve goals beyond what is required. Is proactive Energy - Consistently maintaining high levels of activity or productivity; sustaining long working hours when necessary; operating with vigor, effectiveness, and determination over extended periods of time Regularly lift 30-50 pounds Regularly perform repetitive tasks Regularly possess manual dexterity to put parts or pieces together quickly and accurately Salary Expectations In addition to offering competitive wages and benefits, HET also offers the opportunity to increase your future earnings tied to growth in company performance. We recognize employee contributions toward growing the business through our unique Growth Participation Unit program (GPU). GPUs are tied directly to company growth and rewards all eligible employees with cash when the business grows over time. Hartzell Engine Tech is an Equal Opportunity Employer/Protected Veteran/Disability/E-Verify Employer Salary Description 21.53 - 32.29 DOE

Job Description Machinist II Our Team's Employee Value Proposition: This Auburn based plant manufactures Couplings with a growing high functioning team and a safe laid-back work environment. We are committed to a positive culture with a sense of community and opportunities to grow. Job Summary: In this job you will assist with the set-up, programming, operation, and adjustment of conventional or automatic machines such as Computer Numeric Controlled (CNC) machines. In this role you will work from drawings and written instructions to create replacement and new parts in making repairs to metal parts as well as for experimental apparatus or prototype equipment and read CNC programs. Responsibilities: Write/edit/modify programs for CNC Machines. Operate CNC machines according to exact tolerances specified on engineering prints. Set up and operate manual lathes, saws, cutting tools, slotting tools to meet exact tolerances on engineering prints. Perform routine inspections and minor maintenance, including housekeeping duties as needed. Troubleshoot and correct operational and quality issues. Ensure the machine is following operational and safety guidelines. Meet all production standards. Run entire cell/area or multiple machines at a time. Work in a constant state of alertness with safety always a priority. Education & Experience: High school diploma or equivalent required. At least 1-2 years of experience as a fully qualified machinist required. Emphasis on machinist trade highly preferred. Required Skills & Abilities: Ability to read and interpret engineering drawings and prints. Ability to work in auto cad including work with computers, hand tools and measuring devices such as calipers, micrometers and tape measures. Ability to write CNC programs. Ability to set up and operate manual lathes and other machines according to precise tolerances. Ability to change tooling, set up machines according to required machining sequences. Advanced troubleshooting and problem-solving skills. Basic maintenance skills. Ability to work and run your machine with minimal supervision. Physical Requirements: A 40-hour work week (Five 8-hour shifts/weekly on average, Monday through Friday). Overtime may be required as needed to meet production demands. Prolonged periods of standing, walking, bending, and stretching. Must be able to lift up to 15 pounds at a time. Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a “U.S. Person”, which includes U.S. citizens, U.S. nationals, U.S. permanent **residents, individuals granted asylum in the United States, and refugees in the United States, or who otherwise can qualify for a license that permits them to hold the position. You should be proficient in: Mechanical Troubleshooting Skills CNC Programming G-Code M-Code Deburring Experience Machine Setups for Production Runs Excellent Communication Skills Shop Math Skills Blueprint Reading Machines & technologies you'll use: CNC Mill (3-4 axis VMC) (Fanuc, Mazak, Doosan) CNC Lathe (2-4 axis) (Mazak, Haas, Okuma, Doosan)

1. NC Program Development: Analyze part prints, manufacturing operation sheets, and NX part models to develop and modify Numerical Control (NC) programs for various 2, 3, 4, and 5 axis machine tools. Utilize NX CAD/CAM graphical system and Turbosoft + airfoil programming software for program development. 2. Technical Expertise: Provide machining and development teams with expertise on potential machining challenges and their impact on surface properties. 3. Program Refinement: Independently develop and refine NC programs, showcasing proficiency and initiative in program optimization. 4. Process Optimization: Determine optimal feeds, speeds, and tool selection for a range of milling applications. 5. Collaboration and Optimization: Collaborate with machine operators and Manufacturing Engineers to optimize machining processes and enhance machine tool capabilities. Basic Qualifications: Bachelor's degree with a minimum of 5 years' experience in engineering, manufacturing, technical, or related industrial fields; or a Master's degree with a minimum of 5 years' experience in similar roles. 5 or more years of experience in programming 2 - 5 axis machine tools using Unigraphics and Vericut CAD/CAM software systems. Proficiency in CAM (Computer Aided Manufacturing) languages, machining techniques, and machine tool capabilities for effective program design. Demonstrated project management skills. Familiarity with Lean Manufacturing principles, including experience with Kaizen events or involvement in continuous improvement programs (ACE, 6S, etc.). Compensación: $85,000.00 - $90,000.00 per year MAKING THE INDUSTRY'S BEST MATCHES DBSI Services is widely recognized as one of the industry's fastest growing staffing agencies. Thanks to our longstanding experience in various industries, we have the capacity to build meaningful, long-lasting relationships with all our clients. Our success is a result of our commitment to the best people, the best solutions and the best results. Our Story: Founded in 1995 Privately Owned Corporation Managing Partner Business Model Headquartered in New Jersey US Based Engineers Only Collaborative Team Approach Methodology and Process Driven GET HIRED Top performing engineers are the foundation of our business. Our priority is building strong relationships with each employment candidate we work with. You can trust our professional recruiters to invest the time required to fully understand your skills, explore your professional goals and help you find the right career opportunities.

Manufacturing Estimator - CNC Machining Turn complex prints into confident, decision-ready numbers Smith & Company is an engineering-driven precision machining company supporting aerospace, defense, medical, and advanced industrial programs. Our estimating function is not a quoting desk-it's a decision engine that feeds leadership, engineering, and operations with fast, accurate insight. If you can turn prints into numbers and numbers into clarity, this role is built for you. What You'll Do • Prepare detailed cost estimates and quotes for CNC-machined parts and assemblies • Analyze drawings, models, specifications, and customer RFQs • Build routing assumptions: setups, cycle time, tooling, fixturing, inspection, and risk • Collaborate daily with engineering, programming, quality, supply chain, and leadership • Use Monday.com to manage RFQs, task flow, priorities, and due dates • Communicate and coordinate through Microsoft Teams (internal + external) • Manage and respond through customer portals (uploads, clarifications, revisions, pricing responses) • Develop Excel-based estimating models (cost rollups, sensitivity analysis, what-if scenarios) • Prepare clear overviews, summaries, and visuals for management review • Enable fast, informed go / no-go and pricing decisions-no data dumps • Support make/buy decisions and outside processing RFQs • Maintain estimating assumptions tied to real shop performance What We're Looking For • Experience estimating CNC machining in aerospace, defense, or high-complexity manufacturing • Strong ability to read engineering drawings, GD&T, and 3D models • Solid understanding of: 3-, 4-, and 5-axis machining o Common A&D materials (aluminum, steel, stainless, titanium, castings) Outside processes (anodize, heat treat, chem-film, paint, plating, etc.) • Advanced Excel skills (structured models, lookups, clean summaries-not just spreadsheets) • Comfortable working in Monday.com, Microsoft Teams, and customer RFQ portals • Able to translate technical detail into executive-level clarity • Organized, disciplined, and honest about risk • U.S. Person eligible for ITAR-controlled work Bonus Points • Background as a machinist, programmer, or manufacturing engineer • Experience with NPI, prototypes, or low-volume / high-complexity work • Project / program management, including direct customer engagement • ERP-based routing and costing experience • Prior support of prime or government RFQs What We Offer • Competitive compensation aligned with experience • Brand-new, climate-controlled facility with modern inspection equipment • Work on high-visibility, mission-critical programs • Direct access to leadership-quality has a real voice here • Work on high-visibility aerospace & defense programs • Long-term growth with a company scaling the right way Bottom line If you believe estimating should enable speed, protect margins, and drive smart decisions, not just spit out prices- Smith & Company - Ready on Day One. Built to Win. #ZR

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Job Summary** Relying on extensive experience and judgment to plan and accomplish goals with advanced coordination and control and using written and/or verbal instructions including engineering drawings and test procedures, positions, builds, tests, repairs and modifies production mechanical and electronic components and instrument. **Essential Duties and Responsibilities** include the following. Other duties may be assigned. + Devises, fabricates, and assembles new or modified mechanical / electro-mechanical, electronic components or assemblies for products such as industrial equipment and machinery, power equipment, servosystems, machine tools, and measuring instruments. May be required to install, troubleshoot, diagnose causes and/or repair products, instruments or equipment or perform routine or preventive maintenance. + Coordinates and participates in final assembly of unit or system, connecting valves, pumps, hydraulic, mechanical or electrical controls, cabling, tubing, power source, and instruments. May assemble standard components and assemblies. + Activates controls to apply electrical, hydraulic, pneumatic, or mechanical power. + Reviews project instructions and drawings to ascertain test specifications, procedures, objectives, test equipment, nature of technical problem, and possible solutions such as part redesign, substitution of material or parts, or rearrangement of parts or subassemblies. + Sets up and conducts tests of complete units and components under operational conditions to components for functional, operational, environmental, and life conditions to evaluate performance and reliability of prototype or production model or to obtain data for development, standardization, quality control, and/or contract requirements. + Analyzes indicated and calculated test results in relation to design or rated specifications and test objectives, and corrects equipment through modification, rebuild or adjustment to meet specifications. + Records test procedures and results, numerical and graphical data, and recommendations for changes in product or test method. **Supervisory Responsibilities** This job has no supervisory responsibilities but may provide technical leadership to lower-level technicians including carrying out lead responsibilities in accordance with applicable regulations and laws and the organization's policies and procedures. This includes, but is not limited to training employees, planning, assigning, directing work and resolving technically related work problems. **Competencies** To perform the job successfully, an individual should demonstrate the following competencies: + Analytical - Collects and researches data; Uses intuition and experience to complement data. Uses education, experience and critical thinking to analyze problems. + Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Works well in group problem solving situations. + Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. + Interpersonal Skills - Remains open to others' ideas and shows willingness to try new things. Accepts and implements feedback. + Oral Communication - Listens and gets clarification; Responds well to questions. + Written Communication - Presents numerical data effectively; Able to read and interpret written information. Writes short reports clearly and informatively; Edits work for spelling and grammar. + Teamwork - Contributes to building a positive team spirit. Exhibits objectivity and openness to others' views. Assists lower level technicians in resolving questions and/or providing instruction. + Ethics - Works with integrity and ethically; + Organizational Support - Follows policies and procedures; Upholds and supports organization's goals and values; + Judgment - Exhibits sound and accurate judgment. + Motivation - Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence. + Planning/Organizing - Prioritizes and plans assigned work activities; Uses time efficiently. + Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. + Quality - Demonstrates accuracy and thoroughness; Pays attention to detail. Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. + Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly but accurately. + Safety and Security - Observes safety and security procedures including using Personal Protective Equipment (PPE) as required and wearing company issued badge when on company property; Reports potentially unsafe conditions; Uses equipment and material properly. + Adaptability - Adapts to changes in the work environment; Able to deal with change, delays, or unexpected events. + Attendance/Punctuality - Is consistently at work and on time. + Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Commits to long hours of work when necessary to reach goals. + Initiative - Volunteers readily; Seeks increased responsibilities; Asks for and offers help when needed. + Innovation - Generates suggestions for improving work; Develops innovative approaches and ideas **Qualifications** To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **Education and/or Experience** Vocational or Technical Certificate, or college degree (Associates Degree) in related or specialized field; Minimum of 15 years of experience, and/or training; or equivalent combination of education and experience. **Language Skills** + Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. + Ability to write reports and correspondence. + Ability to speak effectively before groups of customers or employees of organization. **Mathematical Skills** + Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. + Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. + Ability to calculate figures and amounts, proportions, percentages, area, circumference, and volume. + Ability to apply concepts of basic algebra and geometry. **Reasoning Ability** + Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. + Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. **Computer Skills** To perform this job successfully, an individual should have knowledge computer software including basic use of spreadsheet (MS Excel), word (MS Word), and email (MS Outlook) software. Employee may be tasked with using software such as LabView for collecting and analyzing data. **Other Skills and Abilities:** To perform this job successfully, an individual should have the knowledge to utilize manufacturing test, development or diagnostic equipment such as but not limited to oscilloscopes, voltmeters, spectrum analyzers. **Other Essential Duties** + Follows all import/export requirements, consulting with facility import/export personnel as required. **Other Skills and Abilities** + Basic Knowledge of ISO and/or AS9100 + Working knowledge of Lean Manufacturing/6 Sigma/Kaizen + Knowledge of specific software (design, analysis, ERP...) **Other Qualifications** + US Citizenship with ability to attain/maintain government security clearance. + Ability to travel (domestically/internationally) approximately _+/-10__% \#TBE Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

NC Programmer Employment Type: Full-Time (Onsite) We are seeking a skilled NC Programmer to join our team in Columbus, GA. This full-time onsite role focuses on supporting and driving programming projects across various machine tools, controls, and programming software. The ideal candidate will excel in developing and implementing programs and associated processes while providing critical shop support through development and production cycles. Key Responsibilities: * Plan, create, develop, and implement NC programs utilizing Siemens NX CAM and Vericut. * Own programming projects from inception through production, ensuring seamless execution. * Provide onsite shop floor support throughout the development and production lifecycle. * Utilize graphic programming, part modeling, and program simulation tools effectively. * Employ process monitoring software to ensure optimal operations. * Quickly adapt to new programming software, coding, and analytical tools. * Contribute to continuous improvement initiatives, focusing on rotating hardware and airfoils. Qualifications: * US Citizenship (required due to ITAR restrictions and government contract requirements). * Proven experience with Siemens NX CAM, Vericut, and other related programming tools. * Familiarity with rotating hardware, airfoils, and continuous improvement projects is highly desirable. * Strong ability to learn and adapt to new technologies and programming methods. Preferred Skills: * Experience with process optimization and monitoring software. * Background in precision manufacturing environments with a focus on high-quality standards. Why Join Us? * Be part of a cutting-edge team working on impactful aerospace and defense projects. * Opportunity to contribute to innovative solutions in a fast-paced and dynamic environment. Location Requirement: This is a full-time onsite position located in Columbus, GA. Department: Transportation (NAM) Associate Positions: 1 Skills Required: CNC Machines,Geometric Dimensioning And Tolerancing (GD&T),CNC Cutting,Siemens CNC,Lathes,VERICUT (Software),Cnc Turning,Precision Machining,Machine Tools,CNC Manufacturing,CNC Milling,CNC Machine Setup,Machining,CNC Operations,Troubleshooting,CNC Controls,CNC Simulator Location: Columbus, Georgia Desireable Skills: CNC Machines,Geometric Dimensioning And Tolerancing (GD&T),CNC Cutting,Siemens CNC,Lathes,VERICUT (Software),Cnc Turning,Precision Machining,Machine Tools,CNC Manufacturing,CNC Milling,CNC Machine Setup,Machining,CNC Operations,Troubleshooting,CNC Controls,CNC SimulatorDesignation: AssociatePosted On: 18-Aug-2025

Why Join Our Team? Do you want to be part of a team that is making a positive difference in lives across the globe? Do you want to be part of a culture where you are recognized, respected, and rewarded for a job well done? U.S. Pipe has been providing quality water and wastewater products since 1899, and for over the past 125 years we have proudly supported local governments, municipalities, water departments, and businesses across the United States, and the world. What We Offer: Team Collaboration: Join a team-oriented environment where collaboration is not just a buzzword but a priority. Career Growth: Be part of an industry leader renowned for world-class design, manufacturing, sourcing, and distribution, and take your career to the next level. Comprehensive Benefits: We provide a comprehensive benefits package with options tailored to meet your needs and those of your family. About The Role: Responsible for measuring, threading adjusting flange fit, and facing the flange on piece of pipe. Work also includes operation of the machine and a crane to move pipe in and out of machine. Essential Duties and Responsibilities: Identify fabrication requirements on the job card. Identify fabrication requirements written on each piece of pipe. Place pipe in machine, center the pipe, and tighten for work. After the pipe is in place, the operator will machine tapered threads into the pipe. During this process, the machine operator is responsible for verifying measurements, such as thread depth and correct taper. After the threads are cut the operator tests the flange to make sure it screws onto the pipe properly. Adjustments are made to the threads if an issue occurs. Applies glue on pipe and flange and uses the machine to tighten the flange onto the pipe. Runs the cutting tool across the surface of the flange to flush fit the flange onto the pipe. Remove pipe from machine and place on boards. Knowledge, Skills and Abilities Good with math, able to read a tape measure and micrometer. Ability to understand machinery processes. Consistent attendance, ability to get to work on time, every day. Team player, willingness to work when needed, help out and volunteer for extras. Positive, enthusiastic and helpful. Qualifications: High school diploma or equivalent desired. Previous experience with machinery is desired. Physical Requirements/Working Conditions: Since this is a heavy industrial environment there will be exposure to Fabrication Shop operations. The employee will be exposed from time to time to the following working conditions: Extreme Heat and Cold, Noise, Vibration, Oils, and Atmospheric Conditions such as Dust, Fumes. Must be able to lift and carry 50 lbs. The employee will be required to perform the following actions (from time to time): Standing, Walking, Balancing, Stooping, Kneeling, Reaching, Talking, Seeing, Hearing, Driving and Sitting. When in the Shop Production Area the employee will be required to wear PPE including (steel toed shoes if conducting any work-related activity), safety glasses and hearing protection where required. Why Join Our Team? Do you want to be part of a team that is making a positive difference in lives across the globe? Do you want to be part of a culture where you are recognized, respected, and rewarded for a job well done? U.S. Pipe has been providing quality water and wastewater products since 1899, and for over the past 125 years we have proudly supported local governments, municipalities, water departments, and businesses across the United States, and the world. What We Offer: Team Collaboration: Join a team-oriented environment where collaboration is not just a buzzword but a priority. Career Growth: Be part of an industry leader renowned for world-class design, manufacturing, sourcing, and distribution, and take your career to the next level. Comprehensive Benefits: We provide a comprehensive benefits package with options tailored to meet your needs and those of your family. About The Role: Responsible for measuring, threading adjusting flange fit, and facing the flange on piece of pipe. Work also includes operation of the machine and a crane to move pipe in and out of machine. Essential Duties and Responsibilities: Identify fabrication requirements on the job card. Identify fabrication requirements written on each piece of pipe. Place pipe in machine, center the pipe, and tighten for work. After the pipe is in place, the operator will machine tapered threads into the pipe. During this process, the machine operator is responsible for verifying measurements, such as thread depth and correct taper. After the threads are cut the operator tests the flange to make sure it screws onto the pipe properly. Adjustments are made to the threads if an issue occurs. Applies glue on pipe and flange and uses the machine to tighten the flange onto the pipe. Runs the cutting tool across the surface of the flange to flush fit the flange onto the pipe. Remove pipe from machine and place on boards. Knowledge, Skills and Abilities Good with math, able to read a tape measure and micrometer. Ability to understand machinery processes. Consistent attendance, ability to get to work on time, every day. Team player, willingness to work when needed, help out and volunteer for extras. Positive, enthusiastic and helpful. Qualifications: High school diploma or equivalent desired. Previous experience with machinery is desired. Physical Requirements/Working Conditions: Since this is a heavy industrial environment there will be exposure to Fabrication Shop operations. The employee will be exposed from time to time to the following working conditions: Extreme Heat and Cold, Noise, Vibration, Oils, and Atmospheric Conditions such as Dust, Fumes. Must be able to lift and carry 50 lbs. The employee will be required to perform the following actions (from time to time): Standing, Walking, Balancing, Stooping, Kneeling, Reaching, Talking, Seeing, Hearing, Driving and Sitting. When in the Shop Production Area the employee will be required to wear PPE including (steel toed shoes if conducting any work-related activity), safety glasses and hearing protection where required.

Milacron is looking for a Manual Lathe Operator to join our team in Norcross, GA. Work You'll Do:• Operate manual lathes to perform precision machining operations.• Turn outside and inside diameters to specified dimensions.• Machine internal and external threads.• Read and interpret blueprints to understand machining specifications.• Use and calibrate measuring instruments such as micrometers and calipers to ensure precision.• Maintain equipment and perform routine maintenance.• Ensure the quality of machined parts meets or exceeds specifications.• Follow safety protocols and maintain a clean and organized workspace.• Adhere to the 5S system (Sort, Set in Order, Shine, Standardize, Sustain). Qualifications:• Proven experience as a Manual Lathe Machinist or similar role.• Strong mathematical skills.• Proficiency in reading blueprints and technical drawings.• Experience using micrometers, calipers, and other precision measuring instruments.• Excellent attention to detail and accuracy.• Good physical condition and stamina.• Ability to work independently and as part of a team.• Strong commitment to safety and quality standards.

Job Title: Manual Machinist (1st Shift) Shift: Monday - Friday 6:00am - 4:30pm About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: Are you a skilled machinist with a passion for precision and innovation? At Ingersoll Rand, we are seeking a talented and dedicated Manual Machinist to join our dynamic team. This is more than just a job; it's an opportunity to be part of a company that values creativity, excellence, and collaboration. Responsibilities: • Performs set ups of large Liquid Ring Vacuum Pump components and operations of large Vertical & Horizontal Lathes used to repair and overhaul Large Liquid Rind Vacuum Pumps & Compressors. • Interprets blueprints/drawings to determine critical dimensions, etc. Ability to read Micrometers, Vernier Calipers, Dial Indicators & other precision measuring & test equipment as required. • Able to maintain low tolerances as indicated by specifications or drawings as low as .0005” at times. • Understands how to select appropriate cutting tools for various metals. Understands how to determine speeds and feeds to obtain proper surface finish. • Able to work overtime; typically throughout the week and occasionally on weekends. • Safe operation of Forklift within a Machine Shop environment. Safe Over Head Crane operation. Adheres to all company EH&S & QMS processes. • Lifting and Rigging of heavy components of various configurations & weights. Assisting in the disassembly, reassembly, repair and rebuilding of Large Liquid Ring Vacuum Pumps. • Other responsibilities as assigned. Requirements: • Applicants will be required to demonstrate knowledge of machine setup, as well as usage of machine controls and capabilities. • 3+ years of experience as a machine operator/Machinist. • 2+ or more years of experience reading and interpreting blueprints. • 1+ or more years of experience working on king style boring mills (or vtls) • Ability to effectively and safely use a variety of tools and equipment, including but not limited to depth gauges, bore gauges, height gauges, feeler gauges, micrometers, calipers, deburring tools, die grinders, drill presses, and overhead lifting equipment. Core Competencies: • Proficiency with prioritizing and meeting multiple deadlines. • Ability to convert between metric and US standard units of measure. • Ability to deal with problems involving several variables • Ability to use standard problem-solving methods (ie. 5 Whys) as trained • Ability to effectively share information about job duties in one-on-one and small group situations to supervisor, customers, clients, and other employees of the organization. Preferences: • HS Diploma or GED preferred. Higher Education or certificate is a plus. • Experience with manual machining such as VTL/Boring Mill/ or Horizontal Lathe. Brands would include but not limited to Cincinnati and King brand. • Proven ability to set up and operate Manual Machines, work centers, specializing in tool changes and in-process offset adjustments. Travel & Work Arrangements/Requirements: • This position will be based 100% onsite at our Moody, AL facility What We Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. You should be proficient in: Manual Machining Skills Machines & technologies you'll use: Manual Vertical Mill Measurement Gauges

Job Title: CNC Production Supervisor Classification: Exempt Grade: Salary Grade 2 Department: Manufacturing Supervisors Reports To: Manufacturing Manager SUMMARY/OBJECTIVE The CNC Production Supervisor will direct manufacturing operations through a team of functional leads. Oversee staffing and training, scheduling, and preventive maintenance for expanding volume producer of high-quality sporting firearms. Monitor and evaluate workflow and collaborate/coordinate with Planning, Manufacturing, Lean and Process engineering to develop and implement process improvements and deploy advanced technologies to improve safety, quality, delivery (OEE improvements) and cost (conversion and material costs). ESSENTIAL DUTIES & RESPONSIBILITIES Prepare goal deployment plan to meet annual op targets (Budget, S, Q, D, C, etc.) and maintain emergency backup plans. Meet production volume and quality requirements monthly. Work with Manufacturing CNC Manager for proposed headcount needs and provide leadership for problem resolution to facilitate strong working relationships. Develop capabilities of personnel within CNC machining. Balance work cell capacity/loading. Ensure compliance with Company standards for cost control, waste reduction, quality, and on-time delivery at the lowest possible cost. Collaborates with continuous improvement to identify and eliminate variation leading to scrap or rework. Collaborate with manufacturing engineering to identify, communicate, and drive implementation of capital improvements including creating an optimal workflow from beginning to end of the process through different plants. Manage policy deployment in the areas of Lean Manufacturing techniques, Training & Work Standards, cost reduction, EH&S, employee relations, and plant performance measures/metrics. Maintain facilities and production assets in optimum condition (TPM) Provide leadership for employee relations through effective communications, coaching, training, and development. Detail and implement long term direct reports/organization plan to increase overall department responsiveness. Perform other related duties as assigned. SUPERVISORY RESPONSIBILITIES Daily supervision of CNC team leads and operators. QUALIFICATIONS (Preferred) Six Sigma and Lean Manufacturing techniques. Modern metal cutting, finishing and assembly techniques. (Preferred) CNC programming, G/M code understanding. A demonstrated ability to lead people and achieve results through others. Ability to think ahead and plan over a 3-6-month time span. Excellent interpersonal and communication skills. Excellent project and program management skills. Quality orientation. Computer proficient. EDUCATION/EXPERIENCE Required: Associates/Bachelor's degree in Engineering, CNC technical training, or equivalent experience. Minimum 5 years related leadership and management experience in a high-volume precision discrete parts CNC mfg. environment. Preferred: Quality background in CNC manufactured components. Lean Manufacturing and Six Sigma training OTHER SKILLS & ABILITIES Attendance is an essential job requirement defined as having regular, consistent, reliable, punctual and predictable attendance including the ability to work regular hours and shifts, overtime before and after shifts and on weekends. Ability to work as part of a team, including all related departments/plants or independently as required to achieve internal and external customer satisfaction. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. While performing the duties of the job the employee works in a manufacturing environment and may be exposed to fumes or airborne particles, moving mechanical parts and vibration. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to talk or hear. The employee is frequently required to sit and use hands to touch, handle, or feel. The employee is occasionally required to stand, walk, reach with hands and arms, climb or balance and stoop, kneel, or crouch. The employee is occasionally required to lift up to 50 pounds. The vision requirements include close vision and ability to adjust focus. WORK AUTHORIZATION This position requires compliance with ITAR requirement. Must be a “U.S. Person” (per ITAR 120.15) and are required to show proof substantiating this upon being hired. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Activities, duties and/or responsibilities may change at any time with or without notice at the sole discretion of the Company.