Computer numerical controller machinist jobs in Birmingham, AL - 102 jobs

Machinist - Level III Tuscaloosa, AL A manufacturing organization is seeking a Level III Machinist to produce precision components and tooling using a variety of manual and CNC machining equipment. This role involves interpreting complex blueprints, drawings, and verbal instructions to manufacture medium- to high-complexity parts while maintaining strict dimensional tolerances and quality standards. The Machinist may also support prototype development and collaborate with engineering teams on new product and process improvements. Key Responsibilities Set up, operate, and maintain CNC milling and turning centers in accordance with detailed blueprints, job routings, and work instructions. Review and retrieve job-related documentation, including part drawings, tooling lists, and manufacturing instructions. Select appropriate cutting tools, fixtures, and workholding methods for a variety of materials and machining operations. Perform complex machining operations for both proven and unproven parts, including prototype and experimental work as required. Install, align, secure, and adjust cutting tools and workpieces; monitor machine feeds, speeds, and offsets to ensure optimal performance. Use precision measuring instruments (e.g., calipers, micrometers, gauges) to verify dimensions and maintain tight tolerances. Inspect finished parts for defects and ensure compliance with quality and specification requirements. Deburr and finish all machined surfaces to meet engineering and quality standards. Accurately document production quantities, inspection results, and required processes within an ERP or manufacturing system. Participate in continuous improvement initiatives to enhance machining efficiency, quality, and safety. Maintain a clean, organized, and safe work environment in compliance with all safety regulations. Assist with the development of new machining methods, tooling, or process improvements for complex components. Perform additional duties as assigned. Qualifications Experience & Education 6-8 years of hands-on machining experience in a manufacturing environment. High school diploma or equivalent, with additional technical or vocational training preferred. Technical & Professional Skills Strong attention to detail and commitment to precision workmanship. Ability to interpret customer specifications, engineering drawings, and technical documentation. Proficiency with basic computer systems and manufacturing software. Solid problem-solving and troubleshooting skills. Proficient use of precision measuring tools, including calipers and micrometers. Strong mathematical skills, including fractions and basic arithmetic. Effective communication skills and the ability to work collaboratively in a team environment. Thorough understanding of workplace safety requirements and best practices. Commitment to maintaining a clean and organized work area. Physical Requirements Ability to lift and/or move materials weighing up to 50 pounds. Visual acuity including close vision, distance vision, depth perception, and the ability to adjust focus. Manual dexterity to handle tools, components, and equipment for extended periods. Ability to stand, walk, and perform repetitive tasks for prolonged periods of time. Additional Information Supervisory Responsibilities: None Travel: Not required

Basic Qualifications Requires a Bachelor's or Technology degree in Engineering or a related specialized area/field, or equivalent (4 years job-related experience). Requires an additional 2+ years of job-related experience, or a Master's degree. CLEARANCE REQUIREMENTS: Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position At General Dynamics Mission Systems, we create the technologies, products and services that help our nation's heroes keep our nation safe. The work we do is so advanced, we are continuously moving the boundaries of what's possible. Here you'll work with the best and your talent will be front and center on projects that impact the world. Are you up to the challenge? We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics to solve our customers' missions in cyber, RF, undersea, interstellar and everything in between. ROLE AND POSITION OBJECTIVES: As a CNC Programmer/Process Engineer for General Dynamics Mission Systems (GDMS) Precision Structures & Optics (PSO), you'll be a member of a cross functional team responsible for developing and optimizing manufacturing processes that involve CNC machinery. The primary role includes creating precise programs that control machine tools, ensuring parts are produced accurately and efficiently. This role will initially focus heavily on CNC programming, with a gradual incorporation of manufacturing process engineering duties as proficiency in CNC programming is achieved. At General Dynamics Mission Systems we manufacture Beryllium products used in the most demanding applications, across the aerospace, defense, and nuclear industries. Our products are used in high performance targeting and guidance systems, missile defense systems, space exploration, and satellites. KEY RESPONSIBILITIES: Develop and write CNC programs for machining aerospace components Interpret engineering drawings and specifications to create accurate programs Optimize tool paths and machining processes to improve efficiency and reduce cycle times Collaborate with design engineers and machinists to ensure manufacturability and production requirements Troubleshoot and resolve programming issues and machine errors Maintain and update CNC program libraries and documentation Conduct trial runs and adjust programs as needed to ensure precision and quality Implement and maintain process control techniques and procedures Develop and optimize machining processes for aerospace components Conduct time studies and apply lean manufacturing principles to improve efficiency Train and mentor production staff on new processes and equipment Participate in continuous improvement initiatives to enhance product quality and reduce costs Ensure compliance with industry standards and regulations Collaborate closely with the manufacturing shop floor to ensure the seamless integration of CNC programming with production operations SKILLS / KNOWLEDGE / ABILITIES: Proficiency in CAD/CAM software Strong understanding of CNC machine operation and G-code programming Knowledge of materials and machining techniques specific to aerospace components Ability to read and interpret complex engineering drawings and GD&T Experience with DNC (Direct Numerical Control) systems Excellent analytical and problem-solving skills Strong attention to detail and precision Ability to work collaboratively in a team environment Strong communication and documentation skills Experience with Six Sigma and Lean Manufacturing methodologies Our Commitment to You: An exciting career path with opportunities for continuous learning a development Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health and wellness programs, employee resource and social groups, and more See more at com/careers/why-work-for-us/benefits Workplace Options: This position is fully on-site. While on-site, you will be a part of the Cullman, AL facility. Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $81,787.00 - USD $90,732.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Samuel, Son & Co. is growing! If you're looking for a rewarding career opportunity with a family run, industry leading organization, bring your experience and motivated attitude to Samuel, Son & Co. Due to our continued success, we are seeking a CNC Operator to support our tubular manufacturing group in Birmingham, Alabama. If you think you have what it takes to become part of the team, contact us today. Here is some of what we have to offer: Competitive compensation Paid vacation Health, dental and vision insurance Pension Plan Opportunity for career stability QUALIFICATIONS: Experience in a manufacturing setting. CNC experience considered a strong asset. Understanding of fabrication of component parts. Ability to read blueprints. Read and understand digital length gauge. Basic math skills with an understanding of the metric system. Understand the importance of working safely at all times. Detail orientated to ensure high quality products for our customers. Available for shift work. Computer skills an asset. Equal Opportunity Employer E-verify Employer About Us At Samuel, we believe every team member brings unique and valuable skills, experiences and knowledge to our thriving business - enabling us to build on over 170 years of success in the metals industry. We offer countless opportunities for our team members to develop and grow in their careers, empower them to make decisions on the job and be a part of driving positive change - within our organization and in the communities where we live and work. If you're seeking a dynamic, supportive and welcoming workplace to make your mark and grow your career, we have the programs, culture and opportunities to make it happen. We're stronger together. At Samuel we believe in a culture of equality. Respect and integrity are at our core. We are committed to building and creating an environment that is open and welcoming for everyone. This job posting is for an existing vacancy within the organization Samuel is an Equal Opportunity Employer. In the United States, we utilize E-Verify. About the Team Samuel Associated Tube Group is a premier supplier of welded cold-drawn stainless steel, high nickel alloy and carbon tubular products with solutions for industries worldwide. We design and manufacture a comprehensive range of tube products including standard and specialized tubular solutions in multiple diameter sizes, shapes and profiles to meet the unique needs of our customers. Leveraging the metallurgical and new product development expertise of our teams, we help customers realize significant cost savings and deliver innovative solutions faster.RequiredPreferredJob Industries Other

Job Description We are hiring multiple CNC Machinists across junior and senior skill bands to support a high-mix, low-volume precision machining environment producing complex, tight-tolerance parts. We're experiencing strong growth and scaling our machining team accordingly, building a balanced crew of developing talent and seasoned experts. You'll find the best of both worlds here: the pace and variety of a job shop, paired with the stability, benefits, and progression of a well-run operation that rewards growth. We're hiring on every shift and offer consistent overtime to those who want it, but rarely required for those who don't. This is not a button-pushing role. Our machinists own work end-to-end, from setup through final inspection, and play a direct role in quality, delivery performance, and continuous improvement. If you have strong fundamentals, a genuine passion for machining, and the skill to prove it, we want to talk. Compensation Junior Machinist: $26 - 33 / hr Senior Machinist: $33 - $45 / hr Night Shift Differential: $3 /hr Weekend Shift Differential: $4 / hr Shifts Day Shift (4 x 10s) 6:00am - 4:30pm Night Shift: (4x 10s) 4:30pm - 3:00am Weekend Shift: (3 x 12s, paid for 40), Friday - Sunday, 6:00am - 6:30pm Consistent Overtime 10+ hours / week for those who want it Rarely required for those who don't Benefits $5-7k of relocation assistance (to Tuscaloosa, AL) Medical, dental, vision 401(k) with match PTO Depending on skill level, you will be responsible for: Set up and operate CNC milling and turning centers in a precision, job-shop environment Run work end-to-end: setup, run, inspect, and document results Interpret complex blueprints, routings, and work instructions Select tooling, establish offsets, and build effective workholding strategies Perform manual measurement and inspection using micrometers, gauges, indicators, and other precision tools Hold tight tolerances and own part quality from first piece through final run Read and understand CNC programs; make edits and adjustments as required Troubleshoot dimensional, tooling, and process issues to restore quality and throughput Support setup of proven and unproven parts based on capability Maintain a clean, safe, and organized work area Participate in continuous improvement and process optimization efforts Requirements We are hiring for two primary profiles and will align level and pay to demonstrated capability. Junior CNC Machinist: This profile is ideal for a machinist with strong fundamentals who is ready to take the next step. You likely bring: A few years of machining experience with the ability to run your own setups on medium-complexity parts Experience on mills and/or lathes in a precision environment Confidence using manual inspection tools (calipers, micrometers, indicators) and holding consistent tolerances Ability to read programs, make small edits/offset changes, and calibrate or verify machine condition as needed Strong coachability, ownership mindset, and a desire to grow into advanced setups and tighter tolerances Senior CNC Machinist: This profile is for a true setup expert who can take on complex, tight-tolerance work, including parts the shop hasn't seen before, and dial them in efficiently. You likely bring: 7+ years in precision machining (more is welcome) Proven experience holding .0005” (5 tenths / ~13 microns) or tighter on critical features, with the ability to verify those tolerances manually Strong ability to interpret complex technical drawings and apply GD&T (e.g., true position, parallelism, profile, concentricity, flatness, coaxiality) Experience setting up multi-axis equipment (5-axis mills and/or mill-turn / multi-axis lathes) Ability to fluently read G-code / M-code and efficiently edit programs to maintain quality and throughput Background in high-setup environments (often 30%+ setup time) and complex setups with 10+ tools (and potentially far more) Experience setting up unproven parts and troubleshooting tooling/process/machine variables to achieve first-article success Strong documentation habits, teamwork, communication, and an unwavering commitment to safety and craftsmanship Benefits Benefits Medical, dental, vision 401(k) with match PTO

What We Live By…… The McWane Way is a core philosophy outlined by the founder J.R. McWane in 1920. Today It encompasses Teamwork, Excellence, Leadership, Environment, Communication, Accountability, Safety and Trust. All team members at every level are expected to know and work by these principles, values, and behaviors. Most importantly, every team member is expected to be able to answer this question, “What does this mean for me?” This is the all-important question because behavior is the best evidence of a living principle. Join the McWane team on the journey to The McWane Way. Who We Are…… McWane Inc. has a newly created division, McWane Plant and Industrial (MPI). This new division, based in Birmingham, AL, combines all Plant and Industrial Products in a single customer-focused package. We offer comprehensive solutions through an experienced team of professionals specifically focused on these two special markets. Our Mission is to be the Plant and Industrial supplier who is “easiest to do business with”. We will make it easier to engineer, specify, and order components for plants. We will provide greater support for smoother delivery, cost-effective installation, and start-up. Most importantly, we will build strong relationships with design engineers, contractors, plant operations teams and project owners to assure we are their first-choice supplier for both new construction and future upgrades. The CNC Machinists will operate CNC machines (lathes, VTL and mills). The Machinist's primary responsibilities will be to set up, machine and check products, and keep production items running through the machine areas with quantity and quality acceptable to company standards. Demonstrate acceptable levels of productivity by running equipment at a production pace and complete changeovers in a timely manner. May also perform additional responsibilities which include, but are not limited to, cell support, finishing, and polishing. Machinist will work closely with the quality department and project coordinators. Scope of Responsibilities Ensuring personal safety and the safety of your team members Assists supervisors and managers in maintaining a safe and healthy work environment Wears appropriate PPE, which may include fall protection, respiratory protection, hearing protection, foot, hand, head, and eye protection Responsible for cleanliness of the assigned work area as well as maintaining a safe and clean work environment Proactively promotes the McWane Way Principles Responsible for loading and unloading parts, deburring parts, and starting and stopping machine Works under supervision, demonstrating a desire to and actively learning how to read blueprints, use appropriate measuring devices, and change, manipulate, and insert programs Change inserts, touch off tools, load new fixtures, and pull up accurate pre-written programs Modifying basic G-code and operation of CNC equipment and manual machines Maintaining shop equipment Maintaining stock materials and supplies to perform day-to-day tasks Demonstrate quality craftsmanship with a desire to produce the best quality components possible Demonstrate a keen sense of continuous improvement to produce things quicker and better Responsible for fluid level maintenance of the assigned machine while in operation Follow all company policies with special regard to safety, quality control, regulatory and materials handling. Receive individual training and mentorship on operations of CNC equipment. Set up machines, lathes, mills or other machining centers for the production of products. Training on regulatory requirement and current documentation practices. Participate in ongoing process improvements Inspect parts to required specifications using precision measuring devices Record production and maintain count cards. CAM Programming preferred CNC Machining complex and high precision parts in metal and plastic May perform additional cell responsibilities as required. Work Environment: While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to finger, handle or feel objects, tools or controls. The employee frequently is required to talk and hear and occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl. Must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus and determine and distinguish color. Qualifications Minimum of 2 years of experience in a CNC Machinist role high school diploma/GED required Associates or higher in machining or technical field preferred. Computer skills required Position Requirements Standing, walking, stooping, balancing, kneeling, reaching, and sitting are some of the physical requirements. Must be able to meet and adhere physical requirements as well as adhere to wearing the appropriate PPE (steel toed boots, safety glasses, hearing protection and mask). Will be required to work in the following conditions: heat, cold, noise, and vibration. Must be able to work in dust and fumes. Must have the ability to operate forklift or overhead crane. Will be required to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Must have some knowledge of industrial tools, their uses, and maintenance. Additional Information 1st Shift M-F 6:30 am - 3:00 pm Hourly Rate: $24.65-$40.53 Excellent benefits include 9 paid holidays plus 2 floating holidays, 3 weeks PTO, and a weekly pay schedule, a 401k plan and company health insurance plans, Education Assistance, a Wellness Program, and an Employee Assistance Program. Please note this is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA - gender identity or expression, and genetic information) or any other category protected by federal, state or local law. LIMITATIONS AND DISCLAIMER The above is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. McWane Plant & Industrial is an EEO/AA employer M/F/D/V. It is the Company's policy to provide equal opportunity for all qualified persons and to prohibit discrimination on the basis of race, color, sex, national origin, religion, age, disability, marital status, sexual orientation, gender identity, citizenship status, or any other legally protected status. We maintain a drug-free workplace and reserve the right to perform substance abuse testing as needed. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

Webb Wheel Products, Inc. As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. The CNC Production Operator operates all CNC/manual machining and painting equipment to produce finished goods. This position is responsible for adhering to established production processes to produce quality work that meets customer specifications and for meeting individual production goals. This position is for an 8-hour shift. The starting pay is $23.97 per hour (plus $1.00 per hour shift premium if working on 2nd or 3rd shift). The top out is $28.64 per hour. Employees are generally topped out within 1 year. Shifts available are 2nd shift (3p-11p) or 3rd shift (11p-7a). Applicant must include complete work history or attach resume to be considered for position. Essential Functions: Responsible for general knowledge of any / all job-related machinery, equipment, and work instructions. Set up and operate production equipment according to established specifications, adjusting CNC programming as needed Calibration and use of measurement equipment Utilize production equipment to produce finished goods in accordance with production goals Perform hourly quality checks to ensure quality of finished product in accordance with established quality processes and guidelines Utilize forklift to move materials and finished goods as needed in the production process Maintain a clean and safe work environment, adhere to all safety procedures Other duties as assigned Position Qualifications: Mechanical skills, ability to read micrometer, blueprints and various calipers Basic math and computer skills Ability to work all jobs within the department Experience: 0-1 years of manufacturing experience CNC and blueprint reading experience preferred Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. Completes set up, and operates both manual and CNC equipment for the efficient production of quality components. Responsible for the production of high-tolerance precision parts. This is a night shift position. First week: Monday - Wednesday 6:00pm - 6:30am. Second week: Monday - Wednesday 6:00pm - 6:30am, Thursday 6:00pm - 2:30am. Shift differential and overtime pay included. What You'll Do as a CNC Machinist II Intermediate ability to interpret technical prints. Intermediate knowledge and use of CNC machine G&M Code and troubleshooting skills to identify and communicate program improvements to programmers. Setup, operate and adjust machining equipment for basic and intermediate complexity part production without supervision. Monitors quality of parts produced utilizing basic and advanced visual metrology devices to ensure Customer requirements are met and follows procedure for handling nonconforming parts. Abides by all Company safety and health policies and procedures. Must use personal protective equipment if required. (Company provided) Aware of and conforms to company ISO goals and objectives and supports company ISO requirements. Aware of and actively participates in company's Lean philosophy of continuous improvement. Ensures measuring devices used to check product quality are calibrated prior to use. Maintains in-process product identification. The Experience, Skills and Abilities Needed Required: High school diploma or equivalent. Minimum one (1) year machining experience in addition to Vocational/Technical degree or four (4) years CNC Machining in lieu of degree. Experience in a CNC I capacity CNC set up Good hand/eye coordination (manual dexterity), basic organizational and troubleshooting/problem solving skills Intermediate knowledge of CNC G&M codes Preferred: Technical/Vocational degree in a related field Data entry system experience What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being and financial future. Here is a brief overview of what we offer: Market Competitive Pay with shift differential Climate controlled facility Extensive Paid Time Off and (9) added Holidays Excellent Healthcare, Dental and Vision Benefits Long/Short Term Disability Coverage 401(k) with a company match Maternity and Paternity Leave Additional add-on benefits/discounts for programs such as Pet Insurance Tuition Reimbursement and continued education programs Excellent opportunities for advancement in a stable long-term career #LI-KL1 Pay rate for this opportunity is $20.00 - 24.00. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. Req ID: 51284 Job Category: Manufacturing Operations Location:RequiredPreferredJob Industries Other

Job DescriptionSnelling is looking for CNC Machinist's for multiple level fabrication and machining company in the Calera, AL area! This role will be responsible for setting up large parts, G code programming, machining and working with our systems to produce Quality parts. The Shop is primarily a cast iron, steel and stainless alloy shop. They have a variety of horizontal and vertical boring bars, a gantry and lathes. 1st & 2nd shifts open!Responsibilities for CNC Machinist: Blueprint reading, understanding symbols and interpreting complex drawings Setting up either castings or fabrications Creating and modifying G-Code and operation of CNC equipment and manual machines CAM programming preferred CNC Machining of complex and high precision parts in metal and plastic Part quality and inspection Demonstrate quality craftsmanship, with a desire to produce the best quality components possible Responsible for fluid level maintenance of the assigned machine while he/she is working on that machine. Qualifications needed for CNC Machinist: Experience with CNC programming (Fanuc (primary), Fagor and Miltronics). Experience machining fabrications and castings. Experience in Job Shop or rapid prototyping environment. Must be able to lift 50 pounds. Must be able to stand on your feet for eight to ten hours. Pay Ranges for CNC Machinist: JR CNC MACHINIST - at least 1-2-year experience, $20-23/hr Mid-level- CNC Machinist - 3-5 years' experience, $23-26/hr SR CNC Machinist - 5+ years' experience, $26-30/hr Interested and qualified? Apply now or email your resume with “CNC Machinist” in the subject line to ************************* . Snelling is a full-service recruiting firm, placing candidates in temporary, temp-to-hire and direct hire positions for 75 years. Snelling is a drug free workplace. All inquiries are strictly confidential, and all search fees are paid by our clients. Contact us today with confidence!

Job Description 's schedule is Friday - Sunday, 6:00am - 6:30pm. Key Responsibilities Set up, operate, and maintain CNC milling and turning centers to manufacture aerospace and defense components in accordance with complex engineering drawings, specifications, and quality standards Interpret detailed job routings, blueprints, GD&T, tool lists, and work instructions with a strong focus on accuracy and repeatability Select, install, align, and adjust cutting tools, fixtures, and work-holding devices appropriate for aerospace materials (aluminum, stainless steel, titanium, Inconel, etc.) Monitor machine feeds, speeds, and offsets to ensure optimal performance and compliance with strict tolerance requirements Perform in-process and final inspections using precision measuring instruments (calipers, micrometers, indicators, gauges, CMM-related tools as applicable) Deburr and finish parts to aerospace standards, ensuring all surfaces conform to engineering and customer specifications Accurately document production data, inspections, and process steps within the ERP system to ensure full traceability Set up and run low-complexity, unproven parts and proven parts with medium to high complexity Support prototype, experimental, and first-article manufacturing efforts Collaborate with engineering and quality teams to troubleshoot issues, improve manufacturability, and recommend process or tooling enhancements Actively participate in continuous improvement, lean manufacturing, and quality initiatives Maintain a clean, organized, and audit-ready work environment in compliance with all safety, quality, and regulatory requirements Perform other duties as assigned Required Qualifications Experience & Education 5-6 years of CNC machining experience, preferably in aerospace and/or defense manufacturing High school diploma or equivalent with advanced machining or technical training Technical Skills & Knowledge Strong understanding of aerospace drawings, GD&T, and customer specifications Proven ability to hold tight tolerances and work with precision components Proficiency using precision measurement tools (micrometers, calipers, height gauges, indicators, etc.) Solid math skills, including fractions, decimals, and basic geometry Working knowledge of ERP systems and manufacturing documentation practices Strong problem-solving skills and ability to troubleshoot machining processes Familiarity with first article inspections (FAI) and quality documentation is a plus Understanding of AS9100, ITAR, or other regulated manufacturing environments is preferred Professional Competencies Exceptional attention to detail and commitment to quality and compliance Strong communication skills and ability to work collaboratively with cross-functional teams Safety-focused mindset with strict adherence to policies and procedures Commitment to maintaining a clean, organized, and controlled work environment Physical Requirements Ability to lift and/or move up to 50 lbs. Ability to stand for extended periods during shifts Frequent use of hands and arms to handle tools, materials, and equipment Specific vision abilities required, including close vision, distance vision, depth perception, and the ability to adjust focus

Details: CNC Machinist - Level III The Machinist III is responsible for manufacturing complex, detailed components and tooling from blueprints, sketches, models, or verbal instructions. This role involves setting up and operating CNC mills, CNC lathes, manual machine tools, grinders, and related equipment while applying advanced mathematical and geometric calculations. The Machinist III ensures parts meet strict tolerances using precision measuring instruments and may support prototype development activities or assist engineering teams with new product designs and process improvements. Typical work includes setting up medium-complexity, new, or unproven parts as well as proven medium-to-high-complexity components. Essential Duties & Responsibilities Set up, operate, and maintain CNC milling and turning centers based on complex blueprints, models, and process specifications. Access job information, including routings, drawings, tool lists, and work instructions. Select appropriate cutting tools, fixtures, and workholding solutions for a variety of materials and machining processes. Record part quantities, operations performed, and process data in the ERP system. Perform precise dimensional measurements to verify conformance to tight tolerances and quality requirements. Inspect completed parts, identify defects, and take corrective action when necessary. Participate in continuous improvement efforts to enhance machining efficiency and tooling effectiveness. Maintain a clean, organized, and safe work environment following all safety regulations. Assist in developing machining processes and tooling strategies for complex components when required. Perform additional duties as assigned. QualificationsExperience & Education 6-8 years of related machining experience. High school diploma or equivalent; additional technical or vocational training preferred. Technical Skills Strong attention to detail and craftsmanship. Ability to interpret complex blueprints, customer specifications, and work instructions. Skilled in the use of precision measuring tools (micrometers, calipers, height gauges, indicators, etc.). Solid understanding of machining principles, feeds/speeds, cutting tools, and materials. Proficient with basic computer functions and ERP data entry. Strong problem-solving ability and troubleshooting skills. Effective communication and teamwork skills. Strict adherence to safety procedures and a commitment to maintaining a clean, organized work area. Excellent math skills, including fractions, decimals, and dimensional calculations. Physical Requirements Ability to lift and move up to 50 lbs. Ability to stand for extended periods. Capable of reaching, handling, and manipulating parts and tools for long durations. Adequate vision for close work, depth perception, and fine measurement tasks. #IND1

ALIGN - Tuscaloosa is offering a $4/hour shift differential for 2nd shift! Manufactures detailed parts and tools from blueprints, sketches, drawings, or verbal instructions using various computer- or mechanically controlled machine tools and equipment. Sets up and operates mills, lathes, computer-controlled equipment (CNC) machine tools, grinders, and other machining equipment using mathematical and geometrical calculations. Uses precision measuring instruments to check and maintain tolerances. Calculates dimensions using measuring instruments. Installs, aligns, secures, and adjusts cutting tools and work pieces. Monitors the feed and speed of machines. Measures and examines completed products for defects. Deburrs all surfaces of parts or products to ensure that they conform to specifications. May also perform complex and varied machining operations in prototype experimental activities. Assists engineers in design, development, and evaluation of new products and recommends product improvements or manufacturing modifications. Sets up low-complexity, unproven parts. May also set up proven parts with medium to high complexity. Essential Duties and Responsibilities include, but are not limited to: • Set up, operate, and maintain CNC milling and turning centers according to complex blueprints and specifications. • Retrieve job related information (job routings, part drawing, tool lists, work-instructions, etc.) • Select and utilize appropriate cutting tools and work holding for various materials and machining processes. • Document manufactured quantities and all required processes utilizing ERP system • Perform precise measurements and inspections to ensure parts meet stringent quality control standards. • Participate in continuous improvement initiatives to optimize machining efficiency. • Maintain a clean and safe work environment, adhering to all safety protocols. • May assist with developing new machining methods and tooling for complex parts. • Other duties assigned. Qualifications: Experience and Education: 5-6 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Ability to use calipers, micrometers, etc. Mastery of basic math (addition, subtraction, multiplication, division, and fractions) Strong teamwork and communication skills to get along with co-workers and be a team player Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

Sign On Bonuses for all hourly Manufacturing Personnel!** Starting pay is based on experience and skills evaluations. WHO ARE WE? DeSHAZO is a leader in the Overhead Bridge Crane design and manufacturing industry, renowned for creating custom-built cranes that excel in reliability and boast an extended service life. Our unwavering commitment to excellence is evident in the meticulous fabrication and welding of highly engineered structures, adhering to rigorous national standards. Notably, our fully equipped facility stands out not only for its machining expertise but also for housing a fully equipped electrical facility dedicated to the design and construction of electrical components. With a state-of-the-art machining facility producing precision parts held to close tolerances, DeSHAZO has solidified its position as a dominant force in the Overhead Crane Industry. JOB SUMMARY: The CNC machinist operates computer numerical control machines to fabricate parts. The CNC machinist loads parts in the machine, cycles machine and detects malfunctions in machine operations, such as worn or damaged cutting tool. The position runs production lots, communicates with co-workers regarding productions runs, and maintains a safe, organized and clean work environment. Perform set ups for small and large production runs on Turning and Machining Centers with minimum supervision. Indicating vises and loading tool changers with the proper tooling, to take a raw piece of material to a finished part. An understanding of speed and feeds and their relationship to different materials. Must be able to hold close tolerances within + or - .001. Must be able to read and interpret blueprints. Understanding of G codes and conversational programming. Fanuc experience a plus. Capable of adjusting tool offsets on 2 and 3 axis machines, downloading programs and some editing. Inspect and check your own work, you are “Quality at the Source” and must have the integrity of filling out First Article Reports completely and honestly. Required to work out shop math problems - bolt holes, angle, and trigonometry. Follow all safety rules and procedures. Capable of working in a safe and productive manner. Capable of lifting 45 pounds in a safe manner. Requirements Must have at least 3-5 years of experience as a CNC machinist. Able to read blueprint. Must be able to conduct G-Code and M-Code programming. Demonstrated ability to modify material by drilling, grooving, cutting, turning, facing and threading material into parts and holding tolerances to specifications. Demonstrated ability to perform simple computer operations, such as clocking in or out of work. Must pass a math test (basic math, geometry, and trigonometry). PHYSICAL REQUIREMENTS/WORKING CONDITIONS: Ability to stand/walk 95% of the workday Lift up to 50 lbs Twist, reach and bend frequently Possess hand/eye coordination and bilateral dexterity (gross and fine) Possess depth perception and peripheral vision Possess the ability to hear Subject to standing on hard surfaces up to 12 hours per day Exposure to hot and cold conditions Benefits Available: Medical (Eligible 1st of the month following hire date.) Dental & Vision Critical Illness Coverage Accident Insurance (off the job accidents) Company-paid Basic Life/AD&D Company-paid Short-Short Voluntary Long-Term Disability Insurance Pre-tax Flexible Spending Accounts (FSA, DCA) 401(k) - Match is discretionary 50% matching up to 6% Employee Assistance Program 9 Paid Holidays per year PTO Program Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled/Other Protected Category Deshazo's Mission: Deshazo is committed to elevating our clients' business needs through custom-built cranes and tailor-made automation systems. We enhance our products by providing expert inspections, repairs, modernizations or rebuilds. New DeSHAZO Direct & Contract Hires Sign-On Bonus $1000/year possible All listed amounts are net pay & available to hourly manufacturing personnel only. $150 2 weeks employed* $350 6 months employed** $500 12 months employed** *Requires zero (0) tardies or unexcused absences allowed during this time period. ** Associate must not receive any progressive discipline per the Employee Handbook. Salary Description $27.00 - $32.00/hr

Think the best job opportunities are far away? Think again. Great opportunities are right here in your backyard. Kelly is looking for a CNC Plasma Operator to work for a premier steel processing company in Birmingham, Alabama. Let us help you grow at work and discover the next step in your career, all while being a vital part of your community. **Salary/Pay Rate/Compensation: $20-23/hr** 3rd shift; 11 pm to 7:30 am Why you should apply to be CNC Plasma Operator: + Competitive pay based on your experience. + Hands-on experience working with advanced CNC plasma cutting equipment. + Clean, modern, and safety-first work environment. + Opportunities for continuous learning and skills development. + Be part of a dynamic team dedicated to quality and growth. **What's a typical day as CNC Plasma Operator? You'll be:** + Setting up and operating state-of-the-art CNC plasma cutting equipment. + Verifying job details and preparing materials for precise cutting using cranes and forklifts. + Monitoring cut quality and making real-time adjustments for optimal results. + Inspecting finished steel parts for quality and dimensional accuracy. + Keeping clear documentation and collaborating closely with loaders, material handlers, and downstream teams. + Performing routine preventative maintenance and maintaining a clean work area. **This job might be an outstanding fit if you:** + Are reliable and have a strong work ethic. + Can read a tape measure, interpret blueprints, and use precision measuring tools. + Are able to lift up to 70 lbs and operate overhead cranes and forklifts safely. + Communicate and work well in fast-paced environments. + Have at least 1 year of CNC plasma or machine operation experience. + Can troubleshoot and efficiently adapt to changing priorities. **What happens next:** Once you apply, you'll proceed to next steps if your skills and experience look like a good fit. But don't worry-even if this position doesn't work out, you're still in our network. That means all of our recruiters will have access to your profile, expanding your opportunities even more. Helping you discover what's next in your career is what we're all about, so let's get to work. Apply to be our new CNC Plasma Operator today! As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here (********************************************************************* for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly . You're looking to keep your career moving onward and upward, and we're here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we're obsessed with where it can take you. To us, it's about more than simply accepting your next job opportunity. It's the fuel that powers every next step of your life. It's the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California's state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly Services is proud to be an Equal Employment Opportunity and Affirmative Action employer. We welcome, value, and embrace diversity at all levels and are committed to building a team that is inclusive of a variety of backgrounds, communities, perspectives, and abilities. At Kelly, we believe that the more inclusive we are, the better services we can provide. Requests for accommodation related to our application process can be directed to Kelly's Human Resource Knowledge Center. Kelly complies with the requirements of California's state and local Fair Chance laws. A conviction does not automatically bar individuals from employment.

Job descriptions may display in multiple languages based on your language selection. What we offer:At Magna, you can expect an engaging and dynamic environment where you can help to develop industry-leading automotive technologies. We invest in our employees, providing them with the support and resources they need to succeed. As a member of our global team, you can expect exciting, varied responsibilities as well as a wide range of development prospects. Because we believe that your career path should be as unique as you are.Group Summary:Cosma provides a comprehensive range of body, chassis and engineering solutions to global customers. Through our robust product engineering, outstanding tooling capabilities and diverse process expertise, we continue to bring lightweight and innovative products to market. Job Responsibilities: Job Overview The CNC Machinist-Tool & Die sets up, programs, and operates CNC mills and related machining equipment to produce high-quality tooling, perform die maintenance, and support production by ensuring tooling meets all quality, safety, and performance standards. Roles And Responsibilities Set up, program, and operate CNC mills (3-axis and 5-axis) independently with minimal supervision. Perform troubleshooting, tool changes, program adjustments, and machining setups on CNC horizontal/vertical mills and lathes. Monitor tool life and ensure accurate part placement using gauges, fixtures, and measurement tools. Maintain and repair dies and tooling to ensure quality output and optimal productivity. Perform TIG/MIG welding, heat treatment, and manual hand-working of dies as required. Coordinate machining schedules between Engineering, Maintenance, and the Die Shop. Read and interpret blueprints, CAD data, sketches, and verbal instructions; program using offline G-Code software. Conduct in-process quality checks, monitor SPC data, and document production updates. Operate all tool room equipment safely (grinders, welders, saws, drill presses, cranes, forklifts, etc.). Maintain accurate records, job logs, and equipment documentation. Conduct in-process quality checks, monitor SPC data, and document production updates. Execute Lockout/Tagout procedures . Experience And Qualifications High School Diploma or GED required; Associate's Degree in a technical field preferred. Certified Machinist required; CNC Machine Operator certification strongly preferred. Minimum 2 years of CNC machining/programming experience in a heavy manufacturing environment (automotive preferred). Strong ability to set up, program, and operate CNC mills accurately and efficiently. Ability to weld (TIG/MIG) and restore tooling to original condition. Proficient with measurement tools, machining fundamentals, tool offsets, and program adjustments. Preferred Skills Blueprint/CAD reading and Smirtware experience. Experience with EDM, automation fundamentals, or robot basics. Previous die-building experience is a plus. Benefits Onsite cafeteria with multiple fresh-cooked options and salad bar annual events (Summer cookouts, Christmas party, etc.) Annual uniform allowance Annual shoe allowance biennial prescription safety glasses allowance Perfect attendance rewards (Hourly employees) Medical Dental Day Education assistance 12 Paid Holidays Health Insurance (includes telemedicine, FSA, HSA, and other benefits) Dental Insurance Vision Insurance 401(k) with match Employee Profit Sharing Plan Awareness, Unity, Empowerment:At Magna, we believe that a diverse workforce is critical to our success. That's why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email or traditional mail to comply with GDPR requirements and your local Data Privacy Law. Worker Type: Regular / Permanent Group: Cosma International

Job Description Manufacturing Estimator - CNC Machining Turn complex prints into confident, decision-ready numbers Smith & Company is an engineering-driven precision machining company supporting aerospace, defense, medical, and advanced industrial programs. Our estimating function is not a quoting desk-it's a decision engine that feeds leadership, engineering, and operations with fast, accurate insight. If you can turn prints into numbers and numbers into clarity, this role is built for you. What You'll Do • Prepare detailed cost estimates and quotes for CNC-machined parts and assemblies • Analyze drawings, models, specifications, and customer RFQs • Build routing assumptions: setups, cycle time, tooling, fixturing, inspection, and risk • Collaborate daily with engineering, programming, quality, supply chain, and leadership • Use Monday.com to manage RFQs, task flow, priorities, and due dates • Communicate and coordinate through Microsoft Teams (internal + external) • Manage and respond through customer portals (uploads, clarifications, revisions, pricing responses) • Develop Excel-based estimating models (cost rollups, sensitivity analysis, what-if scenarios) • Prepare clear overviews, summaries, and visuals for management review • Enable fast, informed go / no-go and pricing decisions-no data dumps • Support make/buy decisions and outside processing RFQs • Maintain estimating assumptions tied to real shop performance What We're Looking For • Experience estimating CNC machining in aerospace, defense, or high-complexity manufacturing • Strong ability to read engineering drawings, GD&T, and 3D models • Solid understanding of: 3-, 4-, and 5-axis machining o Common A&D materials (aluminum, steel, stainless, titanium, castings) Outside processes (anodize, heat treat, chem-film, paint, plating, etc.) • Advanced Excel skills (structured models, lookups, clean summaries-not just spreadsheets) • Comfortable working in Monday.com, Microsoft Teams, and customer RFQ portals • Able to translate technical detail into executive-level clarity • Organized, disciplined, and honest about risk • U.S. Person eligible for ITAR-controlled work Bonus Points • Background as a machinist, programmer, or manufacturing engineer • Experience with NPI, prototypes, or low-volume / high-complexity work • Project / program management, including direct customer engagement • ERP-based routing and costing experience • Prior support of prime or government RFQs What We Offer • Competitive compensation aligned with experience • Brand-new, climate-controlled facility with modern inspection equipment • Work on high-visibility, mission-critical programs • Direct access to leadership-quality has a real voice here • Work on high-visibility aerospace & defense programs • Long-term growth with a company scaling the right way Bottom line If you believe estimating should enable speed, protect margins, and drive smart decisions, not just spit out prices- Smith & Company - Ready on Day One. Built to Win. #ZR

Job Description Join Our Team at voestalpine Railway Systems Nortrak! Embark on a rewarding career journey with voestalpine Railway Systems Nortrak, North America's premier designer and manufacturer of special trackwork. With a legacy spanning 160 years, we lead the industry in shaping the future of rail solutions. As part of the voestalpine Railway Systems global network, we are committed to delivering quality products and services, including rails, turnouts, fastening systems, signaling technologies, and monitoring solutions. Operating with a presence across Canada, the US, and Mexico, we prioritize the well-being of our people, global mobility, and sustainability and innovation. Our people are the foundation of our success. Skilled, motivated, and results-driven individuals shape our culture demonstrating our core values of Respect, Responsibility, Curiosity, Courage, Passion, and Diversity each day. This commitment is more than shared values; it extends to shared responsibilities for safety and quality, showing genuine care for one another's growth and development, a commitment to our customers, and fostering strong relationships within the Nortrak Team and with our customers. We are currently looking for a CNC Machinist to join our team in Birmingham, Alabama. Purpose of Position: Reporting directly to the Department Supervisor, the CNC Machinist is responsible for safely and efficiently operating CNC machines and related equipment to ensure proper cleaning and preparation of castings, as outlined in the OMS/process sheet. The role also includes performing accurate inspections of castings to maintain quality standards. The ideal candidate will have hands-on experience with multi-axis CNC milling machines and a strong understanding of G-code programming. Task and Responsibilities: Operate and maintain multi-axis CNC milling machines. Read, interpret, and adjust G-code programming to ensure accurate machining. Apply M-code programming when needed. Monitor machine operations to ensure correct tooling, cutters, and speeds are used. Manage CNC programs for recurring parts and issue them ahead of production needs. Help team members with CNC program questions, machine operation, and tooling issues. Knowledge of operating multi-axis CNC machines. Ensure all CNC programs prioritize safety and follow company safety policies. Follow all safety, quality, and environmental procedures. Keep track of hand tools, carbide inserts, and other small tooling-stock, usage, and ordering. Suggest ways to improve manufacturing efficiency and reduce costs through better tooling and methods. Make sure all programs produce quality parts that meet standards. Work with QA and production teams to complete first article runs within tolerance. Help with machinery maintenance, installation, and setup. Work well with others and support a team-oriented environment. Adhere to Nortrak's Safety, Quality, and Environmental Procedures, Practices, and Policies. Job Requirements: College degree in manufacturing technology or programming is preferred or equivalent experience including CNC programming experience in a heavy manufacturing environment. Proven experience operating multi-axis CNC machines. Strong understanding of G-code programming and the ability to read, modify, and troubleshoot code. Familiarity with M-code programming is considered an asset. Ability to read and interpret technical drawings and blueprints. Proficient with precision measuring instruments (e.g., calipers, micrometers). Strong attention to detail and commitment to safety and quality. Excellent problem-solving skills and mechanical aptitude. Physical Demands: Frequent standing, walking, stooping, kneeling, crouching, climbing, and pushing, pulling, or lifting objects for the duration of your required schedule shift. Use hands and arms to operate tools, handle materials, and reach for the duration of your required scheduled shift. Regularly lift and carry 30-35 pounds; occasionally lift up to 50 pounds. Required vision abilities include close, distance, color, peripheral vision, depth perception, and focus adjustment. Hearing abilities necessary to perform job tasks safely and effectively. Working Location: Birmingham, Alabama. Benefits: A supportive, family oriented Nortrak Blue culture We provide an environment where Health and Safety is our #1 priority Career development opportunities and competitive pay progression Competitive medical, dental & vision benefits Company paid life and disability insurance Paid holidays and vacation Retirement plan with matching contributions Tuition Assistance Program Wellness Program Employee Assistance Program Employee Recognition Programs If you think you have the necessary qualifications and drive to excel in our team, we invite you to apply now and join us at voestalpine Railway Systems Nortrak. Apply today! voestalpine Railway Systems Nortrak (“Nortrak”) is a subsidiary of voestalpine AG (******************** one of Europe's premier steel producers with over 50,000 employees worldwide. Nortrak is closely affiliated with voestalpine's Railway Systems group which operates in 21 countries across the globe to provide cutting edge system-based solutions to railroads and transits. Our website is *************************************** voestalpine Railway Systems Nortrak is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected Veteran status, and any other federal, state, or locally protected classifications. INDHP #ZR

Job Description About the Role: This CNC Machinist position is a hands on role focused on precision machining, CNC operation, and quality driven manufacturing. Ideal for candidates searching for CNC Machinist, CNC Operator, or Precision Machining roles, this position supports daily production through accurate setups, safe machine operation, and consistent part quality. Responsibilities: Set up, operate, and monitor CNC mills or lathes to produce high quality parts to specification. Perform tool changes, adjust offsets, and verify part dimensions using precision measurement instruments. Read and interpret blueprints, technical drawings, and machining instructions. Inspect finished components, document results, and maintain compliance with quality standards. Maintain a clean and organized workspace while following all safety procedures. Qualifications: Experience as a CNC Machinist or CNC Operator in a manufacturing environment. Ability to read blueprints, use micrometers, calipers, and other inspection tools. Proficiency with machine setups, tooling changes, and basic troubleshooting. Strong understanding of machining processes, feeds, speeds, and materials. Ability to work in a fast paced production environment with attention to detail. Desired Qualifications: Experience with multi axis machining or advanced CNC equipment. Familiarity with G code adjustments or minor program edits. Background in lean manufacturing or continuous improvement practices. Experience working with metals, high precision parts, or tight tolerance components

Job Description Pro Staffing Solutions, a proud division of Pro Mechanical Services Co. is a rapidly growing family-owned skilled trades labor contractor dedicated to connecting talented professionals with leading companies across the United States. With extensive real-world experience, our leadership team deeply understands the unique challenges faced by various industries. This insight allows us to effectively match skilled talent with the right opportunities, ensuring success for both our employees and our clients. We are seeking a CNC Programmer. This is a full- time Salary position with a local facility focusing on metal fabrication and electrical power distribution. The perfect candidate for this position would have 1-2 years of CNC operator and programming experience. You must be able to work well with technology and have great attention to detail. This facility is utilizing new Trumpf equipment and nesting software which does not require a vast amount of experience. Advanced training is provided through Trumpf. Please apply and provide a resume if interested, this position is an immediate hire! Salary range is $60,000- $65,000 based on experience and an interview. Requirements High school diploma or GED required; technical training or associate degree preferred Minimum 1 year of experience in CNC programming and machine operation Proficient in G-code and CAM software Strong understanding of materials and machining properties Ability to read technical drawings and use inspection tools Excellent problem-solving skills and attention to detail Ability to work independently and as part of a team Job Duties: Program CNC machines (lathe, mill, bending, cutting, or punching machines) using software Set up machines, including tooling, fixturing, and calibration Read and interpret blueprints, technical drawings, and GD&T Operate machines if needed and monitor production to ensure parts meet specifications Perform in-process inspection using micrometers, calipers, and other precision tools Troubleshoot and correct machining issues as they arise Maintain equipment and adhere to safety protocols and quality standards Collaborate with engineering and quality teams for process improvements Benefits Full range of company offered benefits such as 401k, health, dental, and vision

Why Join Our Team? Do you want to be part of a team that is making a positive difference in lives across the globe? Do you want to be part of a culture where you are recognized, respected, and rewarded for a job well done? U.S. Pipe has been providing quality water and wastewater products since 1899, and for over the past 125 years we have proudly supported local governments, municipalities, water departments, and businesses across the United States, and the world. What We Offer: * Team Collaboration: Join a team-oriented environment where collaboration is not just a buzzword but a priority. * Career Growth: Be part of an industry leader renowned for world-class design, manufacturing, sourcing, and distribution, and take your career to the next level. * Comprehensive Benefits: We provide a comprehensive benefits package with options tailored to meet your needs and those of your family. About The Role: Responsible for measuring, threading adjusting flange fit, and facing the flange on piece of pipe. Work also includes operation of the machine and a crane to move pipe in and out of machine. Essential Duties and Responsibilities: * Identify fabrication requirements on the job card. * Identify fabrication requirements written on each piece of pipe. * Place pipe in machine, center the pipe, and tighten for work. * After the pipe is in place, the operator will machine tapered threads into the pipe. * During this process, the machine operator is responsible for verifying measurements, such as thread depth and correct taper. * After the threads are cut the operator tests the flange to make sure it screws onto the pipe properly. Adjustments are made to the threads if an issue occurs. * Applies glue on pipe and flange and uses the machine to tighten the flange onto the pipe. * Runs the cutting tool across the surface of the flange to flush fit the flange onto the pipe. * Remove pipe from machine and place on boards. Knowledge, Skills and Abilities * Good with math, able to read a tape measure and micrometer. * Ability to understand machinery processes. * Consistent attendance, ability to get to work on time, every day. * Team player, willingness to work when needed, help out and volunteer for extras. * Positive, enthusiastic and helpful. Qualifications: * High school diploma or equivalent desired. * Previous experience with machinery is desired. Physical Requirements/Working Conditions: * Since this is a heavy industrial environment there will be exposure to Fabrication Shop operations. * The employee will be exposed from time to time to the following working conditions: Extreme Heat and Cold, Noise, Vibration, Oils, and Atmospheric Conditions such as Dust, Fumes. * Must be able to lift and carry 50 lbs. * The employee will be required to perform the following actions (from time to time): Standing, Walking, Balancing, Stooping, Kneeling, Reaching, Talking, Seeing, Hearing, Driving and Sitting. * When in the Shop Production Area the employee will be required to wear PPE including (steel toed shoes if conducting any work-related activity), safety glasses and hearing protection where required.